Professional Documents
Culture Documents
2015 Wireline Services Catalog PDF
2015 Wireline Services Catalog PDF
Contents v
Contents vii
During the early 1900s Conrad and with the company’s 15 product lines, the in cased wells, including measurements
Marcel Schlumberger experimented GeoMarket regions provide a powerful that until recently were available only
with surface electrical measurements as conduit through which information in openhole environments. On a larger
a way of defining the Earth’s subsurface and know-how flow to the customers, scale, efficient decision making for
structure. In 1927 they performed their and through which Schlumberger full-field enhanced oil recovery (EOR)
experiment in an oil well in France for engineers and geoscientists maximize projects progresses from measurements
the Pechelbronn Oil Company. technological synergies over the entire for determining feasibility to pilot
The result was the first electrical life of the field. projects for understanding the complex
log, and it showed conclusively that geo- The importance of the timely flow interaction of injected agents with
logic formations penetrated by the drill of information is especially true in the existing reservoir fluids in the ever-
could be identified by electrical mea- oil and gas industry, where critical changing downhole environment.
surements. The electric log gave eyes to decisions hinge upon the availability of Production logging, cement and
the oil finders, who previously could rely data. Data acquired by Schlumberger corrosion evaluation, and nuclear
only on drill cuttings and core samples. is made available to operators in real measurements made after casing has
In the years since that historic event time by using the Internet and satellite been set are increasingly used to identify
in France, Schlumberger has become communication networks. Decisions problems and monitor well performance.
the world’s leading supplier of technol- made on the basis of these data can be The comprehensive Schlumberger line
ogy, integrated project management, implemented quickly and efficiently. of production services is engineered
and information solutions to custom- As wells proliferate in deeper water for safety, reliability, and performance.
ers working in the oil and gas industry depths with attendant high pressures New perforation systems have also been
worldwide. Employing approximately and high temperatures, the operating developed with a focus on maximizing
123,000 people representing over envelope of logging tools is also being production by engineering shaped
140 nationalities and working in more expanded to provide the same reliable charges to shoot deeper in stressed rock
than 85 countries, Schlumberger pro- performance and high-quality data as at downhole pressures and temperatures.
vides the industry’s widest range of in conventional wells. Similarly, well The services in this catalog are
products and services from exploration geometries are becoming increasingly grouped according to their applications.
through production. complex. To meet this challenge, A brief description of each service
Schlumberger is organized as an most logging tools in use today can be and its measurement and mechanical
integrated oilfield services company conveyed on drillpipe, coiled tubing, or specifications are included. For
in GeoMarket* regions that provide wireline tractors to address a wide range more information on designing a
customers with a single point of contact of well conditions. logging program to meet your specific
at the local level for field operations and Oil fields around the world are aging, needs, contact your Schlumberger
bring together geographically focused driving an increasing need to evaluate representative.
teams to meet local needs and deliver old wells. Schlumberger provides state-
customized solutions. Working together of-the-art formation evaluation services
Risk Management
Business Processes
■ Set Quality & HSE performance objectives, measure results, assess and continually improve processes,
services and product quality, through the use of an effective management system;
■ Plan for, respond to and recover from any emergency, crisis and business disruption;
■ Minimize our impact on the environment through pollution prevention, reduction of natural resource
■ Communicate openly with stakeholders and ensure an understanding of our QHSE policies, standards,
which we can have an impact, and share with them our knowledge of successful QHSE programs
and initiatives.
This Policy shall be regularly reviewed to ensure ongoing suitability. The commitments listed are
in addition to our basic obligation to comply with Schlumberger standards, as well as all applicable
laws and regulations where we operate. This is critical to our business success because it allows us
to systematically minimize all losses and adds value for all our stakeholders.
Paal Kibsgaard
Chief Executive Officer
Last Update on 14 December 2011
All Schlumberger new-generation and three-phase AC) at more than comparable to those from a processing
wireline logging units are equipped 3 times the output power of the MAXIS center, and real-time data transmission
with the Enhanced Wireline Acquisition system. In the event of a modular unit via satellite or the communications
Front-End (eWAFE). The eWAFE failure, the field engineer can switch module built into the eWAFE system.
system’s modular, versatile, and fully to the built-in backup module with In combination with InterACT* global
redundant architecture improves on minimum downtime. connectivity, collaboration, and infor-
the predecessor MAXIS* multitask The eWAFE system interfaces down- mation service, the eWAFE system
acquisition and imaging system to enable hole tools with the high-end acquisition securely delivers real-time log data
combining and conveying the latest and and data-recording processors of the from remote sites to support timely deci-
most complex array of sensors in the Modular Configuration MAXIS system sion making concerning the reservoir
Schlumberger portfolio. Under the full (MCM) through MaxWell* integrated and well.
configuration, eight programmable, field acquisition software. MaxWell soft-
high-density universal power modules ware provides data acquisition and tool
(UPMs) can simultaneously supply control functionality, real-time playback
several types of power (AC, DC, EMEX, capabilities, wellsite answer solutions
Schlumberger recognizes that the data The wellsite engineer simply uploads install and maintain the system in the
gathered in the field must be transferred graphical or digital data to the InterACT customer’s office.
to the users as reliably and as quickly as website for remote users to view or The same process used for internal
possible. To this end, Schlumberger has analyze in real time. Formats supported team members easily controls partner
a proven global data delivery network include Digital Log Information Standard access to data. Because the data reside
that securely, reliably, and efficiently (DLIS), Log ASCII Standard (LAS), and centrally in the system database, there
transfers data from remote sites. Data American Standard Code for Information is no need for continual updates and
can be transmitted from the wellsite and Interchange (ASCII) for digital data distribution. Partners access specified
forwarded via e-mail, facsimile, and File and Picture Description System (PDS), data at the operator’s discretion.
Transfer Protocol (FTP). Schlumberger Tagged Image File Format (TIFF), or
InterACT global connectivity, collabora- many other file types for graphical data.
tion, and information service furthers The embedded log graphics viewer Data formats
real-time data accessibility from a Web provides options to view and manipulate MaxWell integrated field acquisition
browser. InterACT service supports wireline data. For example, wireline and software creates and records three
■ transfer of real-time wireline, drilling, drilling data can be viewed concurrently industry formats:
and completion data on the same log presentation. ■ DLIS—Created by Schlumberger
InterACT global connectivity, collabo- pressed for efficiency, and automatic This file format for electronic
ration, and information service is a link recovery is available if telecommu- images is used for graphical display,
user-friendly, intuitive system that nications breaks occur. This superior manipulation, and printing of data
requires no installation of specialized transfer process means that InterACT curves and imaging logs.
software. From a connection to either service can be used even in areas with Other limited formats can be gener-
the Internet or a local intranet, data unsophisticated communication links. ated upon request.
are downloaded or viewed using inter- InterACT service uses best-in-class
active, customizable graphics viewers security standards for both hardware
on a PC or conveniently on iPhone® and software. All data transfer uses
and iPad® mobile digital devices by 128-bit Secure Sockets Layer (SSL)
using InterACT service’s app. Real-time encryption. The system meets industry
data can be automatically and continu- security standards, minimizing the risk
ously delivered to and viewed on the of data disclosure. If an intranet-only
user’s computer or mobile device. solution is preferred, Schlumberger can
Specifications
EDTC-H Telemetry Cartridge
Temperature rating 400 degF [204 degC]
Pressure rating 20,000 psi [138 MPa]
30,000 psi [207 MPa]
Outside diameter 3.625 in [9.21 cm]
Surface Systems 13
Surface Systems 15
Integrated wireline tension relief, WellSKATE* low-friction This comprehensive planning tool
well conveyance accessories, and the recommends the optimal conveyance
conveyance SureLOC* electronically controlled system while identifying system
From conventional well environments cable release device (ECRD) as components that exceed specifications.
to ultradeep and highly deviated designed using the Well Conveyance The user can modify operational
wells and where increased pulling Planner means that well trajectories conditions and equipment and also
power is required, Schlumberger and conditions that were not previously specify customer requirements for
provides efficient and reliable wireline wireline accessible no longer have the planner to recompute conveyance
conveyance. The deployment of to automatically resort to alternative capabilities. To avoid the operational
TuffLINE torque-balanced composite methods of conveyance. As necessary, limitations of mechanical weakpoints
wireline cable on an integrated high- wireline deployment can be augmented and previous-generation ECRDs, a
tension conveyance system expands with the use of wireline tractors. SureLOC cable release device is used.
wireline data acquisition capabilities The design can also incorporate a
with unprecedented improvements wide range of WellSKATE low-friction
in safety, efficiency, reliability, and Well Conveyance Planner conveyance accessories to significantly
sticking avoidance, especially for high- Reliable conveyance for both routine decrease the risk of differential sticking
tension operations. The integration and high-tension operations begins by rolling instead of sliding to reduce
of high-strength cable, heavy-duty with calculation of the pulling friction coefficients and by keeping the
modular logging units, an optional capabilities and associated operating toolstring away from the borehole wall.
capstan package providing complete risk by the Well Conveyance Planner.
Sheave hanger
Sheave wheel
Tieback sling
SureLOC
cable release device
Antisticking accessories
The integrated wireline high-tension conveyance system provides efficient and reliable deployment.
Surface Systems 17
Specifications
OSU-PA and OSU-PB MONU-B Offshore Unit OSU-N Offshore Unit
Offshore Units
Modular components Power pack module (POSU): Power pack module (EHPS): Power pack module (POSU):
• Diesel (OSU-PA) • Electrohydraulic • Redundant, dual electrohydraulic,
• Electrohydraulic (OSU-PB) Logging module (ONCC): base frame mounted
Logging module (COSU): • Offshore NORSOK-compliant cabin Logging module (COSU):
• High-tension cabin Winch module (WDDS or WOSU): • Ultradeepwater cabin
Winch module (WOSU): • Zone‑rated WDDS with • High-tension cabin
• High-tension WOSU WDR-59 drum Winch module (WOSU):
with WDR‑59 drum • High-tension WOSU • Ultradeepwater WOSU
with WDR-59 drum with WDR-70 drum
• High-tension WOSU
with WDR-59 drum
Acquisition system Full-configuration Full-configuration Full-configuration
dual eWAFE system dual eWAFE system dual eWAFE system
Drum capacity WDR-59 with TuffLINE 18000 WDR-59 with TuffLINE 18000 WDR-70 with TuffLINE 26000
cable: 33,000 ft [10,060 m] cable: 33,000 ft [10,060 m] cable: 43,000 ft [13,100 m]
WDR-59 with TuffLINE 18000
cable: 33,000 ft [10,060 m]
Pull capacity without capstan WOSU: 18,000 lbf [80,070 N] WDDS: 11,400 lbf [50,710 N] 18,000 lbf [80,070 N]
WOSU: 18,000 lbf [80,070 N]
Capstan pull capability Zone-rated, deck-mounted dual drum ATEX zone-rated, CE-marked, Zone-rated, deck-mounted dual drum
(WDDC-BB): 24,000 lbf [106,760 N] deck- or derrick-mounted dual drum (WDDC-BC): 26,000 lbf [115,660 N]
ATEX zone-rated, CE-marked, deck- (ZPPC): 24,000 lbf [106,760 N]
or derrick-mounted dual drum
(ZPPC): 24,000 lbf [106,760 N]
Special applications Single or modular deployment Modular deployment Single deployment
DNV 2.7-1, 2.7-2, 2-22 WOSU: DNV 2.7-1, 2.7-2, 2-22 DNV 2.7-1
OSU-PB: CE and ATEX Zone 2 NORSOK and CE Zone 2 Quick-swap winch drum capability
Specifications
TuffLINE 18000 Cable TuffLINE 26000 Cable
Ends-fixed breaking strength 28,000 lbf [124,550 N] >40,000 lbf [>178,000 N]
Ends-free breaking strength 27,000 lbf [120,100 N] >36,000 lbf [>160,150 N]
Safe working load 18,000 lbf [80,070 N] 26,000 lbf [115,650 N]
Temperature rating 1 h: 465 degF [241 degC] 1 h: 465 degF [241 degC]
24 h: 240 degF [232 degC] 24 h: 240 degF [232 degC]
Cable OD 0.5 in [1.27 cm] 0.535 in [1.36 cm]
Cable weight In air: 416 lbm/1,000 ft [189 kg/300 m] In air: 524 lbm/1,000 ft [234 kg/300 m]
In freshwater: 331 lbm/1,000 ft [150 kg/300 m] In freshwater: 425 lbm/1,000 ft [190 kg/300 m]
Max. (rms) voltage, V Per helical conductor: 800 Per helical conductor: 780
Center conductor: 1,250 Center conductor: 1,235
Max. current per conductor, A 1.61 2.6
Surface Systems 19
3 drive
UltraTRAC tractor enable the engineer ■ Openhole formation testing
to monitor tractor response and the
■ Borehole imaging services
progress of downhole operations as the
automatic radial force regulation and ■ Perforating
8-drive
tandem
Surface Systems 21
Mechanical Specifications
Four drive TuffTRAC Tractor TuffTRAC Mono Tractor
sections
Output Cased hole perforating, Cased hole perforating, logging, log-
logging, and intervention ging while tractoring, and intervention
Four-drive Maximum speed 3,200 ft/h [975 m/h] 2,400 ft/h [730 m/h]
tandem
Temperature rating 350 degF [177 degC] 302 degF [150 degC]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa]
Hole size—min. 3.4 in [8.6 cm] 3.4 in [8.6 cm]
Hole size—max. 10.6 in [26.9 cm] 10.6 in [26.9 cm]
Outside diameter 3.125 in [7.94 cm] 3.125 in [7.94 cm]
Six-drive Length† Drive sections: 2 to 8 Drive sections: 2 to 6
tandem Min. (2 drives): 11.4 ft [3.5 m] Min. (2 drives): 18.2 ft [5.5 m]
3 drives: 14.2 ft [4.3 m] 3 drives: 21.1 ft [6.4 m]
Max. pull per drive section 300 lbf [1,330 N] 300 lbf [1,330 N]
Max. force 2,400 lbf [10,680 N] 1,800 lbf [8,010 N]
Power, cable requirements AC, heptacable DC, multiconductor cable
(mono and hepta)
† Depending on the configuration and excluding the 2.8-ft [0.85-m] logging head. The incorporated CCL, head tension cell, addressable
cable-release device, and shock absorber are standard features that do not add extra length
Specifications
MaxTRAC Tractor
Output Downward motion of logging tools
Tractoring speed Standard with 500-lbm [227-kg] load:
1,800 ft/h [549 m/h]
Max. with 300-lbm [136-kg] load: 2,500 ft/h [762 m/h]
Mud type or weight limitations None
Combinability
Logging while tractoring Tools using PS Platform* production services platform
telemetry such as the RSTPro* and SCMT* tools
No logging while tractoring Combinable with most other tools
Combinable with perforating services
Special applications Maximum dogleg severity: 45° per 100 ft [30 m]
in 7-in [17.78-cm] casing
30° per 100 ft in 4½-in [11.43-cm] casing
Surface Systems 23
Depth measurement is critical for Cable and tool friction, especially The depth and tension subsystems
wireline operations. An integrated depth when calipers are open, cause elastic of the IDW feature alarms and winch
dual-wheel spooler (IDW) provides downhole cable stretch not detected shutdown for specified safe operating
calibrated absolute depth measurement by the IDW at surface. Friction always zones of depth and tension, respec-
recorded on two independent wheels opposes the movement of tool and tively. The upper and lower limits of
kept constantly in contact with cable. cable, so stretch is highest when the the safety zones are called setpoints
A fastest wheel logic combined with tool is moving up and negligible when and are provided for four conditions:
wheel slippage automatic detection the tool is moving down. Because log ■ low tension
ensures depth accuracy at all times. data is recorded while moving up, the ■ high tension
Other downhole measurements are tool is physically deeper than what the
■ top of well
valuable, but they must be “secured” IDW records on the way up but correctly
at the most precise point possible positioned on the way down. The ■ bottom of well.
below the Earth’s surface. Decision difference between the log-up and log-
Winch operation is shut down auto-
makers rely on precise depths for down tensions is used to compute the
matically when any of the limits estab-
mapping geologic intervals, designing elastic stretch, and a positive correction
lished by these setpoints are exceeded.
completion procedures, and conducting is applied to the depth before logging
other related operational and financial up begins. As the friction progressively
procedures. If the depth measurement decreases while logging up, the tool
is incorrect, incorrect geologic and returns to the same zero point when
economic decisions could result. back at surface.
Surface Systems 25
§ Resolution depends on the accuracy of casing electrical conductivity (sigma). The usual method is to use API specifications in a “good”
casing section and adjust conductivity to match the nominal value, which has a typical 12.5% range (Oil Country Tubular Goods,
API Spec 5CT, Specification for Casing and Tubing).
8-mm calibration target
††
Casing ID (dci) < 6 in and tool eccentered = [30% × (dci – 2.2 in)]
‡‡
Measurement Specifications
ThruBit Logging Services
Output Telemetry, memory, and gamma ray tool: gamma ray, three-axis acceleration, borehole temperature
Array induction tool: induction resistivity, mud resistivity, optional SP
Neutron tool: thermal neutron porosity
Density tool: bulk density, PEF, borehole caliper
ThruBit Dipole service:† Compressional and shear Δt, full waveforms, anisotropy characterization
Spectral gamma ray tool: gamma ray; corrected gamma ray for uranium; potassium, thorium, and uranium curves
Logging speed Telemetry, memory, and gamma ray; neutron, density, induction, and ThruBit Dipole service: 1,800 ft/h [549 m/h]
Range of measurement Gamma ray: 0 to 1,000 gAPI
Resistivity: 0.1 to 2,000 ohm.m
Neutron: 0 to 60 pu
Bulk density: 1.04 to 3.3 g/cm³
PEF: 0.9 to 10
Caliper: 18 in [45.72 cm]
ThruBit Dipole service: Δts < 200 us/ft [656 us/m]
Monopole: Δtc and Δts < 170 us/ft [558 us/m]
Vertical resolution Gamma ray: 12 to 24 in [30.48 to 60.96 cm]
Resistivity: 1, 2, and 4 ft [0.3, 0.6, and 1.2 m]
Neutron: 12 to 15 in [30.48 to 38.10 cm]
Bulk density: 9 to 12 in [22.86 to 30.48 cm]
ThruBit Dipole service: <44-in [<1.12-m] processing resolution for 6-in [15.24-cm] sampling rate
Accuracy Gamma ray: ±5% gAPI
Resistivity: ±1 ohm.m or ±2%, whichever is greater for the 60-in [152.40-cm] measurement
Neutron tool: ±1 pu or 5% of the porosity, whichever is greater
Bulk density: ±0.02 g/cm³
PEF: ±0.15
Caliper: ±0.2 in [±0.51 cm]
Δt: ±2 us/ft [±6.6 us/m] or ±2% for 8¾-in [22.22-cm] hole size
Th: ±3.2 ppm or ±5% of reading
U: ±1 ppm or ±5% of reading
K: ±0.5% (weight) or ±10% of reading
Depth of investigation Gamma ray: 12 in [30.48 cm]
Resistivity: 10, 20, 30, 60, and 90 in [25.40, 50.80, 76.20, 152.40, and 228.60 cm]
Neutron: 10 in [25.40 cm]
Bulk density: 2 in [5.08 cm]
PEF: 4 in [10.16 cm]
Δt: 3 in [7.62 cm]
Mud type or weight limitations None
Combinability All ThruBit services tools
Special applications
† Limited availability, contact your Schlumberger representative.
■ Litho-Density* tool
■ sonic tool
resistivity tool
■ audio temperature tool.
Quad-combo
Mechanical Specifications
QAIT QSLT QLDT QCNT QTGC
Temperature rating 500 degF [260 degC] 500 degF [260 degC] 500 degF [260 degC] 500 degF [260 degC] 500 degF [260 degC]
Pressure rating 30,000 psi [207 MPa] 30,000 psi [207 MPa] 30,000 psi [207 MPa] 30,000 psi [207 MPa] 30,000 psi [207 MPa]
Borehole size—min. 3⅞ in [9.84 cm] 4 in [10.16 cm] 3⅞ in [9.84 cm] 4 in [10.16 cm] 3⅞ in [9.84 cm]
Borehole size—max. 20 in [50.80 cm] 8 in [20.32 cm] 9 in [22.86 cm] 12 in [30.48 cm] No limit
Outside diameter 3 in [7.62 cm] 3 in [7.62 cm] 3 in [7.62 cm] 3 in [7.62 cm] 3 in [7.62 cm]
Length 30.8 ft [9.39 m] 23 ft [7.01 m] 14.7 ft [4.48 m] 11.9 ft [3.63 m] 10.67 ft [3.25 m]
With inline centralizer:
29.9 ft [9.11 m]
Weight 499 lbm [226 kg] 270 lbm [122 kg] 253 lbm [115 kg] 191 lbm [87 kg] 180 lbm [82 kg]
Holding time at 8 h† 5h 5 h† 8 h† 8 h†
500 degF [260 degC]
† In logging conditions with tool powered
Mechanical Specifications
IPL Service
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 6 in [15.24 cm]
Borehole size—max. 21 in [53.34 cm]
Outside diameter 4.5 in [11.43 cm]
Length 40.5 ft [12.34 m]
Weight 845 lbm [383 kg]
Mechanical Specifications
CHFR-Plus and CHFR-Slim Tools RSTPro Tool CHFP Service CHFD Service Sonic Scanner Platform DSI Imager CHDT Tester
Temperature rating 302 degF [150 degC] 302 degF [150 degC] 350 degF [177 degC] 257 degF [125 degC] 350 degF [177 degC] 350 degF [177 degC] 350 degF [177 degC]
With flask: 400 degF [204 degC]
Pressure rating 15,000 psi [103 MPa] 15,000 psi [103 MPa] 20,000 psi [138 MPa] 15,000 psi [103 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa]
51
Carbonate Advisor
Petrophysics and Productivity Analysis
Carbonate Advisor* petrophysics and The three steps of the integrated At each step, customized log displays
productivity analysis integrates a workflow are the determination of and crossplots facilitate quality con-
comprehensive suite of petrophysical ■ lithology and porosity—simultane- trol, parameter selection, and graphical
logging measurements to quantita- ously integrating measurements zonation. Within hours of data acquisi-
tively determine reservoir producibility sensitive to rock matrix properties, tion, a continuous log of the analyzed
in carbonate formations. Unlike sand- such as Litho Scanner high-defi- carbonate formation is produced.
stones, with their well-characterized nition spectroscopy service, ECS*
correlations of porosity, permeability, elemental capture spectroscopy
and other reservoir properties, the Application
sonde, photoelectric factor (PEF),
heterogeneous pore systems of and neutron capture spectroscopy,
■ Quantitative producibility and
carbonate rocks defy routine petro- with measurements sensitive to textural analysis for carbonate
physical analysis. Carbonate Advisor both the rock matrix and contained reservoirs
analysis accurately evaluates carbonate fluids, such as density and neu-
formations by accounting for reservoir tron porosity, and measurements
heterogeneity on a multiplicity of sensitive primarily to the fluids
scales—of the grains, the pores, and and pore space, such as nuclear
the textures. magnetic resonance (NMR) porosity
The systematic analytical framework and bound-fluid volume
of Carbonate Advisor analysis uses the ■ pore type and permeability—
pore geometry to sequentially interre-
partitioning the total porosity into
late logging data to producibility. The
eight pore system classes based on
evaluation centers on characterization
pore-throat sizes, revealing the influ-
and size partitioning of the pore geom-
ence of the pore geometry, which is
etry by using texture-sensitive borehole
not well correlated with mineralogy
logs, such as MR Scanner expert mag-
in carbonates, unlike in sandstones
netic resonance service and borehole
■ relative permeability and satu-
imaging. This advanced methodology
leverages pore geometry analysis to con- ration—using a powerful for-
firm the identification of petrophysical ward model to account for the
rock types (mineralogy and pore system radial variation of resistivity, from
class), determine fluid saturations, and both array induction and array
estimate permeabilities and relative laterolog measurements, resulting
permeabilities. from borehole fluid invasion
during drilling.
uation is developed with only mini- global connectivity, collaboration, and and reservoir fluid sampling
mal user input from the integration information service. Answer products operations
of all the formation, borehole, and are available within minutes of data ■ Drillstem testing
quality control measurements of the acquisition, as data are processed lin- ■ Completion strategies
Platform Express integrated wireline early for each depth level, starting with
■ Sensitivity analysis
logging tool and ECS elemental cap- mineralogy and matrix properties and
ture spectroscopy sonde. The accuracy proceeding through the computation
of the spectroscopy measurements is of matrix-corrected porosity, perme-
relatively insensitive to mud weight, ability, and fluid saturations. Unlike
most fluid types, and borehole size conventional processing, answer prod-
and rugosity. SpectroLith* lithology ucts from the DecisionXpress system
processing of the ECS sonde mea- are accurate and reliable for most
surements of elemental concentra- siliciclastic reservoirs worldwide, with-
tions employs empirical relationships out requiring manual customization
derived from an extensive proprietary of parameter definitions for specific
core chemistry and mineralogy data- environments.
base to determine quantitative lithol-
ogy and matrix properties data. The
unique DecisionXpress system combi-
nation of elemental concentration logs
and outputs from SpectroLith process-
ing forms a robust foundation for the
highly accurate, consistent derivation
of mineralogy and matrix parameters.
Receiver
Mechanical Specifications
DeepLook-EM Service Transmitter DeepLook-EM Service Receiver
Temperature rating 302 degF [150 degC] 302 degF [150 degC]
Pressure rating 20,000 psi [138 MPa] 15,000 psi [103 MPa]
Well size—min.
Open hole 4.5 in [11.43 cm] 2.5 in [6.35 cm]
Cased hole 4.5 in [11.43 cm] 2.5 in [6.35 cm]
Well size—max.
Open hole No limit No limit
Cased hole 13.75 in [34.93 cm] No limit
Outside diameter 3.375 in [8.57 cm] 2.125 in [5.40 cm]
Length 32.4 ft [9.88 m] Four receivers: 73.8 ft [22.5 m]
Weight 410 lbm [186 kg] 416 lbm [189 kg]
Tension 18,000 lbf [80,070 N] 18,000 lbf [80,070 N]
Compression 10,000 lbf [44,450 N] na
na =
not available
profile tool (PGMS) measures the CBL and 5-ft [1.52-m] Variable ■ Reservoir and production
average density of the wellbore fluid, Density log displays. monitoring
from which the water, oil, and gas ■ PS Platform Multifinger Imaging ■ Transient analysis
holdups are derived. Accelerometer Tool (PMIT) makes internal casing ■ Short periods of multiple-layer
measurements provide deviation cor- or tubing condition measurements testing
rection for the measured fluid density. from multiple caliper measurements
around the casing or tubing.
PGMS
PUCS-A
CCL-N GHOST-A
PMIT-A
PILS-A
RST-C
FloView Plus
PFCS
SCMT-BB
Mechanical Specifications
PBMS PFCS PGMS GHOST Tool RSTPro Tool SCMT Tool
Temperature rating† 302 degF [150 degC] 302 degF [150 degC] 302 degF [150 degC] 302 degF [150 degC] 302 degF [150 degC] 302 degF [150 degC]
Pressure rating 15,000 psi [103 MPa] 15,000 psi [103 MPa] 15,000 psi [103 MPa] 15,000 psi [103 MPa] 15,000 psi [103 MPa] 10,000 psi [69 MPa]
Borehole size—min. 2⅜ in [6.03 cm]‡ 2⅜ in [6.03 cm]‡ 2⅜ in [6.03 cm]‡ 2 in [5.08 cm]‡ RST-C: 113⁄16 in [4.60 cm] 2⅜ in [6.03 cm]‡
RST-D: 2⅞ in [7.30 cm]
Borehole size—max. No limit 11 in [27.94 cm] No limit 9 in [22.86 cm] RST-C: 7⅝ in [19.37 cm] 7 in [17.78 cm]
RST-D: 9⅝ in [24.45 cm]
Outside diameter 1.6875 in [4.29 cm] 1.6875 in [4.29 cm] 1.6875 in [4.29 cm] 1.71 in [4.34 cm] RST-C: 1.71 in [4.34 cm] 1.6875 in [4.29 cm]
RST-D: 2.51 in [6.37 cm]
Length 8.27 ft [2.52 m] 5.14 ft [1.57 m] 4.8 ft [1.46 m] 7.1 ft [2.16 m] RST-C: 23.0 ft [7.01 m] 11 ft [3.35 m]
RST-D: 22.2 ft [6.77 m]
Weight 38.3 lbm [17.4 kg] 19.7 lbm [8.9 kg] 29.5 lbm [13.4 kg] 28.4 lbm [12.9 kg] RST-C: 101 lbm [46 kg] 50 lbm [23 kg]
RST-D: 208 lbm [94 kg]
† For high-temperature applications, ask your Schlumberger representative for the individual tool specifications.
‡ Minimum tubing size
Mechanical Specifications
Dielectric Scanner Service
Temperature rating 302 degF [150 degC]
Pressure rating 15,000 psi [103 MPa]
Outside diameter 4.77 in [12.12 cm]
Borehole size—min. 5.5 in [13.97 cm]
Borehole size—max. 22.0 in [55.88 cm]
Min. restriction 5.25 in [13.34 cm]
Length 11.27 ft [3.44 m]
Weight 262 lbm [119 kg]
Tension 50,000 lbf [222,411 N]
Compression† 4,400 lbf [19,572 N]
† 8,000 lbf [35,586 N] with stiffener kit for the TLC system
Mechanical Specifications
Rt Scanner Service
Temperature rating 302 degF [150 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 6 in [15.24 cm]
Borehole size—max. 20 in [50.8 cm]
Outside diameter† 3.875 in [9.84 cm]
Length 19.6 ft [5.97 m]
Weight 404 lbm [183 kg]
Tension 25,000 lbf [111,205 N]
Compression 6,000 lbf [26,690 N]
† Does not include required standoff
Resistivity Logging 67
hydrocarbons
■ Invasion profiling
■ Thin-bed analysis
Measurement Specifications
AIT-B and AIT-C AIT-H and AIT-M HIT QAIT
Output 10-, 20-, 30-, 60-, and 90-in [25.40-, 50.80-, 76.20-, 152.40-, and 228.60-cm] deep induction resistivities, SP, Rm
Logging speed 3,600 ft/h [1,097 m/h]
Range of measurement 0.1 to 2,000 ohm.m
Vertical resolution 1, 2, and 4 ft [0.30, 0.61, and 1.22 m]
Accuracy Resistivities: ±0.75 us/m (conductivity) or ±2% (whichever is greater)
Depth of investigation† AO/AT/AF10: 10 in [25.40 cm]
AO/AT/AF20: 20 in [50.80 cm]
AO/AT/AF30: 30 in [76.20 cm]
AO/AT/AF60: 60 in [152.40 cm]
AO/AT/AF90: 90 in [228.60 cm]
Mud type or weight limitations Salt-saturated muds usually outside the operating range of induction tools
Combinability Combinable with most services Platform Express tool Xtreme platform SlimXtreme platform
Special applications High temperature Slim wellbores
H₂S service HPHT
† AO = 1-ft [0.30-m] vertical resolution, AT = 2-ft [0.61-m] vertical resolution, AF = 4-ft [1.22-m] vertical resolution
Mechanical Specifications
AIT-B and AIT-C AIT-H AIT-M HIT QAIT
Temperature rating 350 degF [177 degC] 257 degF [125 degC] 302 degF [150 degC] 500 degF [260 degC] 500 degF [260 degC]
Pressure rating 20,000 psi [138 MPa] 15,000 psi [103 MPa] 15,000 psi [103 MPa] 25,000 psi [172 MPa] 30,000 psi [207 MPa]
Borehole size—min. 4¾ in [12.07 cm] 4¾ in [12.07 cm] 4¾ in [12.07 cm] 4⅞ in [12.38 cm] 3⅞ in [9.84 cm]
Borehole size—max. 20 in [50.80 cm] 20 in [50.80 cm] 20 in [50.80 cm] 20 in [50.80 cm] 20 in [50.80 cm]
Outside diameter 3.875 in [9.84 cm] 3.875 in [9.84 cm] 3.875 in [9.84 cm] 3.875 in [9.84 cm] 3 in [7.62 cm]
Length 33.5 ft [10.21 m]† 16 ft [4.88 m] 16 ft [4.88 m] 29.2 ft [8.90 m]† 30.8 ft [9.39 m]†
Weight 575 lbm [261 kg] 255 lbm [116 kg] 282 lbm [128 kg] 625 lbm [283 kg] 499 lbm [226 kg]
Tension 16,500 lbf [73,400 N] 20,000 lbf [88,960 N] 20,000 lbf [88,960 N] 20,000 lbf [88,960 N] 20,000 lbf [88,960 N]
Compression 2,300 lbf [10,230 N] 6,000 lbf [26,690 N] 6,000 lbf [26,690 N] 6,000 lbf [26,690 N] 2,000 lbf [8,900 N]
† Without SP sub
Applications
HRLA high-resolution
Determination of Rt
laterolog array tool
■
permeability indication
■ Identification of fluid contacts
ARI
Resistivity Logging 69
Mechanical Specifications
ARI Imager HRLA Tool HALS
Temperature rating 350 degF [177 degC] 302 degF [150 degC] 257 degF [125 degC]
Pressure rating 20,000 psi [138 MPa] 15,000 psi [103 MPa] 10,000 psi [69 MPa]
Borehole size—min. 4½ in [11.43 cm] 5 in [12.70 cm] 5½ in [13.97 cm]
Borehole size—max. 21 in [53.34 cm] 16 in [40.64 cm] 16 in [40.64 cm]
Outside diameter 3⅝ in [9.21 cm]† 3⅝ in [9.21 cm] 3⅝ in [9.21 cm]
7¼ in [18.41 cm]†
Length 33.25 ft [10.13 m] 24.1 ft [7.34 m] 16 ft [4.88 m]
Weight 579 lbm [263 kg] 394 lbm [179 kg] 221 lbm [100 kg]
Tension 3,000 lbf [13,345 N] 30,000 lbf [133,450 N] 20,000 lbf [88,960 N]
9,400 lbf [41,810 N]
Compression 2,000 lbf [8,900 N] With fin standoff: 3,600 lbf [16,010 N] 2,400 lbf [10,675 N]
With rigid centralizers: 7,800 lbf [34,700 N] With four rigid centralizers:
9,400 lbf [41,810 N]
† ARI tool is available in two sizes to fit different borehole sizes.
that are the optimal shape for the ■ Indication of hole rugosity
cylindrical borehole and mudcake and
make the tool insensitive to variations
Resistivity Logging 71
Mechanical Specifications
MicroSFL Tool MCFL PCD with Microlog
Temperature rating 350 degF [177 degC] 302 degF [150 degC] 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa] 15,000 psi [103 MPa] 20,000 psi [138 MPa]
Borehole size—min. 5½ in [13.97 cm] Without bow spring: 51⁄5 in [13.21 cm] Without microlog pad: 6½ in [16.51 cm]
With bow spring: 6 in [15.24 cm] With microlog pad: 7 in [22.23 cm]
Borehole size—max. 17½ in [44.45 cm] 16 in [40.64 cm] 22 in [55.88 cm]
Outside diameter Caliper closed: 4.625 in [11.75 cm] Without pad: 3.375 in [8.57 cm]
4.77 in [12.11 cm] With slim pad: 5 in [12.70 cm]
With standard pad: 6.25 in [15.87 cm]
Length 12.3 ft [3.75 m] 10.85 ft [3.31 m] 17.25 ft [5.26 m]
Weight 313 lbm [142 kg] 171.7 lbm [78 kg] 345 lbm [156 kg]
Tension 40,000 lbf [177,930 N] 50,000 lbf [222,410 N] 40,000 lbf [177,930 N]
Compression 5,000 lbf [22,240 N] 8,800 lbf [39,140 N] 5,000 lbf [22,240 N]
CHFR-Plus
Resistivity Logging 73
Mechanical Specifications
CHFR-Plus Tool CHFR-Slim Tool
Temperature rating 302 degF [150 degC] 302 degF [150 degC]
Pressure rating 15,000 psi [103 MPa] 15,000 psi [103 MPa]
Casing size—min. 4½ in 2⅞ in (min. ID: 2.4 in [6.10 cm])
Casing size—max. 9⅝ in 7 in
Outside diameter 3.375 in [8.57 cm] 2.125 in [5.40 cm]
Length 48 ft [14.63 m] 37 ft [11.28 m]
Weight 683 lbm [310 kg] 253 lbm [115 kg]
Tension 20,000 lbf [88,960 N] 10,000 lbf [44,480 N]
Compression 2,400 lbf [10,675 N] 1,000 lbf [4,448 N]
Applications
■ Depth determination
■ Depth correlation within the well CGRS
and between wells
■ Lithology identification
mineral deposits
■ Cased hole perforating
depth control SGT-N
■ Positioning for openhole
sampling tools
HTGC
HGNS
QTGC
Mechanical Specifications
HGNS HTGC SGT QTGC CGRS
Temperature rating 302 degF [150 degC] 500 degF [260 degC] 350 degF [177 degC] 500 degF [260 degC] 350 degF [177 degC]
Pressure rating 15,000 psi [103 MPa] 25,000 psi [172 MPa] 20,000 psi [138 MPa] 30,000 psi [207 MPa] 20,000 psi [138 MPa]
Borehole size—min. 4½ in [11.43 cm] 4¾ in [12.07 cm] 4⅞ in [12.38 cm] 3⅞ in [9.84 cm] 113⁄16-in [4.61-cm]
seating nipple
Borehole size—max. No limit for gamma ray No limit No limit No limit No limit
measurement
Outside diameter 3.375 in [8.57 cm] 3.75 in [9.53 cm] 3.375 in [8.57 cm] 3.0 in [7.62 cm] 111⁄16 in [4.29 cm]
Length 10.85 ft [3.31 m] 10.7 ft [3.26 m] 5.5 ft [1.68 m] 10.67 ft [3.25 m] 3.2 ft [0.97 m]
Weight 171.7 lbm [78 kg] 265 lbm [120 kg] 83 lbm [38 kg] 180 lbm [82 kg] 16 lbm [7 kg]
Tension 50,000 lbf [222,410 N] 50,000 lbf [222,410 N] 50,000 lbf [222,410 N] 50,000 lbf [222,410 N] 10,000 lbf [44,480 N]
Compression 37,000 lbf [164,580 N] 20,000 lbf [88,960 N] 23,000 lbf [103,210 N] 20,000 lbf [88,960 N] 1,000 lbf [4,450 N]
Nuclear Measurements 79
Mechanical Specifications
NGS Tool HNGS
Temperature rating 302 degF [150 degC] 500 degF [260 degC]
Pressure rating 20,000 psi [138 MPa] 25,000 psi [172 MPa]
Borehole size—min. 4½ in [11.43 cm] 4¾ in [12.07 cm]
Borehole size—max. No limit No limit
Outside diameter NGT-C: 3⅝ in [9.21 cm] 3¾ in [9.53 cm]
NGT-D: 3⅞ in [9.84 cm]
Length 8.6 ft [2.62 m] 11.7 ft [3.57 m]
Weight NGT-C: 165 lbm [75 kg] 276 lbm [125 kg]
NGT-D: 189 lbm [86 kg]
Tension 50,000 lbf [222,410 N] 50,000 lbf [222,410 N]
Compression 20,000 lbf [88,960 N] 23,000 lbf [102,310 N]
Nuclear Measurements 81
Measurement Specifications
Litho Scanner Service
Output Elemental yields, elemental weight fractions, TOC, dry-weight
mineral concentrations, formation sigma, matrix properties
Logging speed† Max.: 3,600 ft/h [1,097 m/h]
Range of measurement 1 to 10 MeV
Vertical resolution 18 in [45.72 cm]
Depth of investigation 7 to 9 in [17.78 to 22.86 cm]
Mud type or weight limitations None
Combinability Combinable with most openhole tools
Conveyance on wireline, TLC tough logging conditions system,
or tractor
Special applications
† A tool planner is used to estimate the precision of the elemental concentrations and interpreted properties such as matrix density
for a given environment, with the recommended logging speed depending on the required precision.
Mechanical Specifications
Litho Scanner Service
Temperature rating Version A: 284 degF [140 degC]
Version C: 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 5.5 in [13.97 cm]
Borehole size—max. 24 in [60.96 cm]†
Outside diameter 4.5 in [11.4 cm]
Length Version A: 14 ft [4.27 m]
Version C: 9 ft [2.74 m]
Weight Version A: 366 lbm [166 kg]
Version C: 290 lbm [132 kg]
Tension 55,000 lbf [244,652 N]
Compression 22,500 lbf [100,085 N]
† With bow spring
Nuclear Measurements 83
Mechanical Specifications
ECS Sonde
Temperature rating 350 degF [177 degC]
500 degF [260 degC] (internal flask, CO₂ cooling)
Pressure rating 20,000 psi [138 MPa]
High-pressure housing: 25,000 psi [172 MPa]
Borehole size—min. 6 in [15.24 cm]
Borehole size—max. 20 in [50.80 cm]
Outside diameter 5.0 in [12.70 cm]
High-pressure housing: 5.5 in [13.97 cm]
Length 10.15 ft [3.09 m]
Weight 305 lbm [138 kg]
Tension 50,000 lbf [222,410 N]
Compression 20,000 lbf [88, 960 N]
Nuclear Measurements 85
Measurement Specifications
CNL Tool HGNS QCNT CHFP Service
Output Thermal neutron porosity Thermal neutron porosity Thermal neutron porosity Neutron porosity,
(uncorrected, environmentally (uncorrected, environmentally (uncorrected, environmentally formation sigma,
corrected, or alpha processed) corrected, or alpha processed), corrected, or alpha processed) measurement quality
CNT-G: Epithermal neutron porosity formation gamma ray,
tool acceleration
Logging speed Standard: 1,800 ft/h [549 m/h] 3,600 ft/h [1,097 m/h] 1,800 ft/h [549 m/h] Recommended: 900 ft/h [274 m/h]
High resolution: 900 ft/h [247 m/h] Max.: 1,800 ft/h [549 m/h]
Range of measurement 0 to 60 pu [0 to 60% uncorrected Porosity: 0 to 50 pu
porosity]
Vertical resolution 12 in [30.48 cm] 12 in [30.48 cm] 12 in [30.48 cm] 14 in [35.6 cm]
Accuracy 0 to 20 pu: ±1 pu 0 to 20 pu: ±1 pu 0 to 20 pu: ±1 pu Porosity: ±1 pu for 0 to 10 pu
30 pu: ±2 pu 30 pu: ±2 pu 30 pu: ±2 pu ±2 pu for 10 to 25 pu
45 pu: ±6 pu 45 pu: ±6 pu 45 pu: ±6 pu ±3 pu for 25 to 40 pu
±4 pu for >40 pu
Sigma: ±1 cu for <20 cu
Depth of investigation � 9 in [�23 cm] (varies with hydrogen index of formation) �7 in [�18 cm]
†
Mud type or weight Thermal measurements not possible in air- or gas-filled wellbores None
limitations
Combinability Combinable with most tools Part of Platform Express tool Combinable with most tools Combinable with most toolstrings
Special applications Slim wellbores
Short-radius wells
Tubing-conveyed logging
On tractor
† Depends on casing and cement thickness, with deployment in casing thickness from 0.205 to 0.545 in [5.21 to 13.84 mm] and correction for combined cement and casing thickness up to 1.5 in [3.8 cm]
Mechanical Specifications
CNL Tool HGNS QCNT CHFP Service
Temperature rating 400 degF [204 degC] 302 degF [150 degC] 500 degF [260 degC] 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa] 15,000 psi [103 MPa] 30,000 psi [207 MPa] 20,000 psi [138 MPa]
Borehole size—min. 4½ in [12.07 cm] 4½ in [11.43 cm] 4 in [10.16 cm] 4½ in [11.43 cm]
Borehole size—max. 20 in [50.80 cm] 16 in [40.64 cm] 12 in [30.48 cm] 9⅝ in [24.45 cm]
Outside diameter Without bow-spring eccentralizer: 3.375 in [8.57 cm] 3 in [7.62 cm] 3.625 in [9.21 cm]
3.375 in [8.57 cm]
Length 7.25 ft [2.21 m] 10.85 ft [3.31 m] 11.9 ft [3.63 m] 12.94 ft [3.94 m]
Weight 120 lbm [54 kg] 171.7 lbm [78 kg] 191 lbm [87 kgm] 222 lbm [101 kg]
Tension 50,000 lbf [222,410 N] 50,000 lbf [222,410 N] 50,000 lbf [222,410 N] 50,000 lbf [222,410 N]
Compression 23,000 lbf [102,310 N] 37,000 lbf [164,580 N] 15,000 lbf [66,720 N] 23,000 lbf [102,310 N]
Nuclear Measurements 87
Mechanical Specifications
APS Sonde HAPS
Temperature rating 350 degF [177 degC] 500 degF [260 degC]
Pressure rating 20,000 psi [138 MPa] 25,000 psi [172 MPa]
Borehole size—min. 4⅝ in [11.75 cm] 5⅞ in [14.92 cm]
Borehole size—max. 21 in [53.34 cm] 21 in [53.34 cm]
Outside diameter 3.625 in [9.21 cm] Without bow spring: 4 in [10.16 cm]
Length 13 ft [3.96 m] 16 ft [4.88 m]
Weight 222 lbm [101 kg] 400 lbm [181 kg]
Tension 50,000 lbf [22,410 N] 50,000 lbf [22,410 N]
Compression 23,000 lbf [102,310 N] 15,000 lbf [66,720 N]
inelastic and capture spectra provides wells where modern openhole logs
the carbon/oxygen (C/O) ratio, which have not been run
is used to determine the formation oil ■ Measurement of water velocity
saturation independent of formation inside casing, irrespective of well-
water salinity that is low or unknown. bore angle (production logging)
If the salinity of the formation water ■ Measurement of near-wellbore
is high, the sigma mode measurement water velocity outside the casing
of the formation thermal neutron cap- (remedial applications)
ture cross section is used to calcu-
■ Formation oil volume from C/O
late formation oil saturation in the
saline water environment. The mea- ratio, independent of formation
surements can also be used to detect water salinity
and quantify the presence of injection ■ Flowing wells (in combination
Nuclear Measurements 89
Mechanical Specifications
RST-C RST-D
Temperature rating 302 degF [150 degC] 302 degF [150°C]
With flask: 400 degF [204 degC]
Pressure rating 15,000 psi [103 MPa] 15,000 psi [103 MPa]
With flask: 20,000 psi [138 MPa]
Borehole size—min. 113⁄16 in [4.60 cm] 2⅞ in [7.30 cm]
With flask: 2¼ in [5.72 cm]
Borehole size—max. 9⅝ in [24.45 cm] 9⅝ in [24.45 cm]
With flask: 9⅝ in [24.45 cm]
Outside diameter 1.71 in [4.34 cm] 2.51 in [6.37 cm]
With flask: 2⅛ in [5.40 cm]
Length 23.0 ft [7.01 m] 22.2 ft [6.76 m]
With flask: 33.7 ft [10.27 m]
Weight 101 lbm [46 kg] 208 lbm [94 kg]
With flask: 243 lbm [110 kg]
Tension 10,000 lbf [44,480 N] 10,000 lbf [44,480 N]
Compression 1,000 lbf [4,450 N] 1,000 lbf [4,450 N]
Three-Detector Lithology
Density
The high-resolution measurements
of the Platform Express integrated
wireline logging tool include the
Three-Detector Lithology Density
(TLD) tool, which is housed in the
High-Resolution Mechanical Sonde
(HRMS). The TLD measures forma-
tion density and formation photo
electric factor. Part of the TLD
measurement is called a backscatter
density measurement because it uses
a third detector located close to the
source. Mudcake density, mudcake
photoelectric factor, and mudcake
thickness are computed using a recur-
sive inversion scheme that is based
on a large set of data points. This
approach provides compensated den-
sity and photoelectric factor in non-
barite mud and compensated density
in barite mud.
LDS-C
HRMS
HLDS
QLDT-B
Nuclear Measurements 91
conventionally from the windows counts The SlimXtreme Litho-Density Tool with seismic data
with enhanced quality control. (QLDT) is designed for operation in
slim and hostile environments with
temperature and pressure ratings of
Hostile Environment 500 degF and 30,000 psi [207 MPa],
Lithology Density Sonde respectively. It measures density and
The Hostile Environment Lithology photoelectric factor using full spectral
Density Sonde (HLDS) is a component data from a three-detector array. The
of the Xtreme HPHT well logging formation density is determined using
platform. Its design and operation an extended spine-and-ribs algorithm.
Mechanical Specifications
TLD LDS HLDS QLDT
Temperature rating 302 degF [150 degC] 350 degF [177 degC] 500 degF [260 degC] 500 degF [260 degC]
Pressure rating 15,000 psi [103 MPa] 20,000 psi [138 MPa] 25,000 psi [172 MPa] 30,000 psi [207 MPa]
Borehole size—min. 6 in [15.24 cm] 5½ in [13.97 cm] 4½ in [11.43 cm] 3⅞ in [9.84 cm]
Borehole size—max. 22 in [55.88 cm] 21 in [53.34 cm] 18 in [45.72 cm] 9 in [22.86 cm]
Outside diameter 4.77 in [12.11 cm] 4.5 in [11.43 cm] 3.5 in [8.89 cm] 3 in [7.62 cm]
Length 12.26 ft [3.74 m] 11 ft [3.35 m] 12.58 ft [3.83 m] 14.7 ft [4.48 m]
Weight 314 lbm [142 kg] 292 lbm [132 kg] 402 lbm [182 kg] 253 lbm [115 kg]
Tension 50,000 lbf [222,410 N] 30,000 lbf [133,450 N] 30,000 lbf [133,450 N] 50,000 lbm [222,410 N]
Compression Without stiffener and locked 5,000 lbf [22,240 N] 5,000 lbf [22,240 N] 17,000 lbf [75,620 N]
flex head: 4,400 lbf [19,570 N]
With stiffener and locked:
flex head: 8,000 lbf [35,590 N]
Nuclear Measurements 93
Mechanical Specifications
MR Scanner Service
Temperature rating 302 degF [150 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 5.875 in [14.92 cm]
Borehole size—max.† No limit
Outside diameter 5 in [12.70 cm]
Cartridge: 4.75 in [12.07 cm]
Length 32.7 ft [9.97 m]
Weight 1,200 lbm [544 kg]
Tension 50,000 lbf [222,410 N]
Compression 7,900 lbf [35,140 N]
† In good borehole conditions
hydrogen index measurement, and and data from the MDT modular
various fluids have different hydrogen formation dynamics tester for
index values as well as polarization porosity, lithology, and fluid
characteristics. NMR data can be pro- determination
cessed to yield formation fluid proper- ■ Critical information for setting
ties such as gas and oil saturation and pipe, determining coring and
oil viscosity. testing needs, and optimizing
completion and fracture programs
■ Integrated solutions of CMR‑Plus
Mechanical Specifications
CMR-Plus Tool
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
High-pressure version: 25,000 psi [172 MPa]
Borehole size—min. Without integral bow spring: 5⅞ in [14.92 cm]
With integral bow spring: 7⅞ in [20.00 cm]
Borehole size—max. No limit, but must be eccentered
Outside diameter Without bow spring: 5.3 in [13.46 cm]
With bow spring: 6.6 in [16.76 cm]
Length 15.6 ft [4.75 m]
Weight Without bow spring: 374 lbm [170 kg]
With bow spring: 413 lbm [187 kg]
Tension 50,000 lbf [222,410 N]
Compression 50,000 lbf [222,410 N]
Mechanical Specifications
Sonic Scanner Platform
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 4.75 in [12.07 cm]
Borehole size—max. 22 in [55.88 cm]
Outside diameter 3.625 in [9.21 cm]
Length 41.28 ft [12.58 m] (including isolation joint)
Basic toolstring (near monopoles only): 22 ft [6.71 m]
Weight 844 lbm [383 kg] (including isolation joint)
Basic toolstring: 413 lbm [187 kg]
Tension 35,000 lbf [155,690 N]
Compression 3,000 lbf [13,340 N]
Mechanical Specifications
ThruBit Dipole Service
Temperature rating 302 degF [150 degC]
Pressure rating 15,000 psi [103 MPa]
Borehole size—min. 5.75 in [14.60 cm]
Borehole size—max. 8.75 in [22.22 cm]
Casing OD range 4½ to 5½ in [11.43 to 13.97 cm]
Outside diameter 2.125 in [5.4 cm]
Length 29.11 ft [8.87 m]
Weight 132 lbm [60 kg]
Tension 25,000 lbf [111,210 N]
Compression Depends on the configuration and application
Transmitter
Receiver section
and cartridge
– Fracture evaluation
– Permeability (mobility) Mechanical Specifications
■ Geomechanics
DSI Imager
– Pore pressure Temperature rating 350 degF [177 degC]
– Wellbore stability Pressure rating 20,000 psi [138 MPa]
– Fracture design Borehole size—min. 4¾ in [12.07 cm]
– Sand strength Borehole size—max. 21 in [53.34 cm]
Casing OD range 5½ to 20 in [13.97 to 50.80 cm]
■ Sonic imaging
Outside diameter 3⅝ in [9.21 cm]
■ Sonic imaging with borehole acous
Length 51 ft [15.54 m] (including isolation joint)
tic reflection survey (BARS)
Weight 900 lbm [408 kg]
– Very long spacing tool Tension 5,000 lbf [22,240 N]
(using spacers)
3,500 lbf [15,570 N]
– Reflection analysis Compression 1,550 lbf [6,890 N]
– Highly dipping beds S-DSI: 1,000 lbf [4,450 N]
– Horizontal wells
(apparent dip > 45°)
– Well placement with respect
to cap rock
DSLT QSLT-A
Mechanical Specifications
DSLT HSLT QSLT
Temperature rating 302 degF [150 degC] 500 degF [260 degC] 500 degF [260 degC]
Pressure rating 20,000 psi [138 MPa] 25,000 psi [172 MPa] 30,000 psi [207 MPa]
Borehole size—min. 4⅝ in [11.75 cm] 4¾ in [12.07 cm] 4 in [10.16 cm]
Borehole size—max. 18 in [45.72 cm] 18 in [45.72 cm] 8 in [20.32 cm]
Outside diameter 3⅝ in [9.21 cm] 3⅞ in [9.84 cm] 3 in [7.62 cm]
Length SLS-D: 18.73 ft [5.71 m] With HSLS-W sonde: 23 ft [7.01 m]
SLS-F: 23.81 ft [7.26 m] 25.5 ft [7.77 m] With inline centralizer:
29.9 ft [9.11 m]
Weight SLS-D: 273 lbm [124 kg] With HSLS-W sonde: 270 lbm [122 kg]
SLS-F: 353 lbm [160 kg] 440 lbm [199 kg]
Tension 29,700 lbf [132,110 N] 29,700 lbf [132,110 N] 13,000 lbf [57,830 N]
Compression 1,650 lbf [7,340 N] With HSLS-W sonde: 4,400 lbf [19,570 N]
2,870 lbf [12,770 N]
With HSLS-Z sonde:
1,650 lbf [7,340 N]
Mechanical Specifications
Quanta Geo Service
Temperature rating 350 degF [177 degC]
Pressure rating Standard: 25,000 psi [173 MPa]
High pressure: 30,000 psi [207 MPa]
Borehole size—min. 7.5 in [19.05 cm]
Borehole size—max. 17 in [43.18 cm]
Outside diameter Tool: 4.5 in [11.43 cm]
Arms section: 6.5 in [16.51 cm]
Length 31.2 ft [9.5 m]
Weight 696 lbm [316 kg]
Tension 27,000 lbf [122,300 N]
Compression 11,000 lbf [48,900 N]
Zm
Zb
Zf
Z90
Next >
Techlog
wellbore Quanta Geo Interpretation
software
program Wellbore Fracture Structural Sedimentology Rock Sand Porosity Sidewall
Geomechanics Analysis Analysis & Stratigraphy Type Count Analysis Coring Advisor
Hard data
Reservoir
model
ready Mangrove* Structural
UFN modeling Modeling
Visualization and interpretation of Quanta Geo service’s images are performed using apps in the Techlog wellbore software
platform to produce hard data that improves the accuracy of reservoir models in the Petrel E&P software platform.
Measurement Specifications
FMI-HD Microimager
Output Formation images and dip
Logging speed Image mode: 1,800 ft/h [549 m/h]
Dipmeter mode: 3,600 ft/h [1,097 m/h]
Range of measurement Sampling rate: 0.1 in [0.25 cm]
Borehole coverage: 80% in 8-in [20.32-cm] borehole
Vertical resolution Horizontal resolution: 0.2 in [0.51 cm]
Vertical resolution: 0.2 in [0.51 cm]
Accuracy Caliper: ±0.2 in [±0.51 cm]
Deviation: ±0.2°
Azimuth: ±2°
Depth of investigation High-frequency component (image details): 0.39 in [1 cm]
Low-frequency component (for calibration to resistivity logs): 30 in [76.2 cm]
Mud type of weight limitations Water-base mud (max. mud resistivity = 50 ohm.m)
Oil-base mud under specific conditions†
Combinability Bottom-only tool, combinable with most tools
Special applications Horizontal wells
† For oil-base mud, contact your Schlumberger representative.
Mechanical Specifications
FMI-HD Microimager
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 6½ in [15.87 cm]
5⅞ in [14.92 cm] in good hole conditions using a kit
Borehole size—max. 21 in [53.34 cm]
Outside diameter 5 in [12.70 cm]
Length 25.43 ft [7.75 m]
Weight 443 lbm [201 kg]
Tension 12,000 lbf [53,380 N]
Compression 8,000 lbf [35,580 N]
Measurement Specifications
FMI Microimager
Output Formation dip, borehole images
Logging speed Image mode: 1,800 ft/h [549 m/h]
Dipmeter mode: 3,600 ft/h [1,097 m/h]
Range of measurement Sampling rate: 0.1 in [0.25 cm]
Borehole coverage: 80% in 8-in [20.32-cm] borehole
Vertical resolution Spatial resolution: 0.2 in [0.51 cm]
Vertical resolution: 0.2 in [0.51 cm]
Accuracy Caliper: ±0.2 in [±0.51 cm]
Deviation: ±0.2°
Azimuth: ±2°
Depth of investigation 1 in [2.54 cm]
Mud type or weight limitations Water-base mud (max. mud resistivity = 50 ohm.m)
Combinability Bottom-only tool, combinable with most tools
Special applications Horizontal wells
Mechanical Specifications
FMI Microimager
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min.† 6¼ in [15.87 cm]
Borehole size—max. 21 in [53.34 cm]
Outside diameter 5 in [12.70 cm]
Length 24.42 ft [7.44 m]
Weight 433.7 lbm [197 kg]
Tension 12,000 lbf [53,380 N]
Compression 8,000 lbf [35,580 N]
† 5⅞ in [14.92 cm] in good hole conditions using a kit
images that are easy to interpret, even ■ Structural and bedding analysis
Interchangeable
rotating subs
Mechanical Specifications
UBI Imager
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 4⅞ in [12.38 cm]
Borehole size—max. 12⅞ in [32.70 cm]
Outside diameter Without sub: 3.375 in [8.57 cm]
Length 21 ft [6.40 m]
Weight 377.6 lbm [171 kg] (with 7-in [17.78-cm] USRS-B sub)
Tension 40,000 lbf [177,930 N]
Compression 11,000 lbf [48,930 N]
Mechanical Specifications
OBMI Imager
Temperature rating 320 degF [160 degC]
350 degF [177 degC]†
Pressure rating 20,000 psi [138 MPa]
25,000 psi [173 MPa]†
Borehole size—min. Standard: 7 in [17.78 cm]
Slim OBMT-E: 6 in [15.24 cm]
Borehole size—max. 16 in [40.64 cm]
Caliper: 17½ in [44.45 cm]
Outside diameter Standard: 5.75 in [14.60 cm]
Slim OBMT-E: 5.25 in [13.33 cm]
Length 17 ft [5.18 m]
Weight 310 lbm [137 kg]
Tension 50,000 lbf [222,410 N]
Compression Standard: 10,000 lbf [44,482 N]
Slim OBMT-E: 8,000 lbf [35,590 N]
† Limited availability
with respect to the Earth’s gravity imager tool images with respect
(G) and magnetic field (F). Because to the wellbore
both vectors are well defined within
the Earth system, a relation can be
established between the tool and
Earth systems. The magnetometer
determines Fx, Fy, and Fz, and the
inclinometer determines Ax, A y, and
A z for the acceleration due to G.
MaxWell integrated field acquisition
software computes deviation, azimuth,
and relative bearing from these values.
When the GPIT tool is used in an
open wellbore, the tools above and
below it must have nonmagnetic
housings. In cased hole the tool can
be used only for deviation and relative-
bearing measurements.
Mechanical Specifications
GPIT Tool
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 4⅝ in [11.75 cm]
Borehole size—max. No limit
Outside diameter 3.625 in [9.21 cm]
Length 4 ft [1.22 m]
Weight 55 lbm [25 kg]
Tension 50,000 lbf [222,410 N]
Compression 16,700 lbf [74,280 N]
Mechanical Specifications
VSI Imager
Temperature rating 350 degF [177 degC]
Pressure rating Standard: 20,000 psi [138 MPa]
High pressure: 25,000 psi [172 MPa]
Borehole size—min. 3 in [7.62 cm]
Borehole size—max. 22 in [55.88 cm]
Outside diameter Standard: 3⅜ in [8.57 cm]
Slim: 2½ in [6.35 cm]
Length Up to 1,040 ft [317 m] for 20 shuttles
Weight Up to 2,200 lbm [998 kg]
Tension 18,000 lbf [80,070 N]
Compression Standard: 5,000 lbf [22,240 N]
With stiffener: 10,000 lbf [44,480 N]
Coupling
Anchoring force 246 lbf [1,170 N] in 3-in [7.62-cm] hole
214 lbf [915 N] in 6-in [15.24-cm] hole
255 lbf [1,130 N] in 12¼-in [31.75-cm] hole
160 lbf [951 N] in 17-in [43.18-cm] hole
Sensor package coupling force 64 lbf [285 N]
Coupling force/sensor weight ratio 10:1
NFH 16-bit resolution at 0.25-ms sampling source pressure is logged with each
Gain: –24 to 24 dB shot. The pressure sensor prevents
Depth sensor 12-bit with one sample per shot source signature variations caused by
Accuracy: ±1.5% variations of source pressure.
Pressure sensor 12-bit with one sample per shot ■ Calibrated near-field hydrophone
Accuracy: ±2%
(NFH)—The integrated NFH pro-
Auxiliary measurements Electronics current, temperature, pressure, humidity vides a superior signal compared with
conventional hydrophones for sig-
Mechanical Specifications nificantly improved source-signature
deconvolution.
TRISOR Acoustic Source Control Element
Temperature rating Operating: 5 to 131 degF [–15 to 55 degC]
Storage: –40 to 158 degF [–40 to 70 degC] Applications
Max. recommended operating 33 ft [10 m] ■ Borehole seismic applications that
depth below sea level
require a high-quality, consistent
source signature with calibrated
amplitude
■ Shot-by-shot source signature
deconvolution
■ Effective Q-factor derivation from
Mechanical Specifications
DeepLook-CS Service Piezoelectric Source DeepLook-CS Service Hydrophone Receiver Array
Temperature rating, degF [degC] 302 [150] 350 [177]
Pressure rating, psi [MPa] 10,000 [69] 10,000 [69]
Well size—min., in [cm]
Open hole 4.5 [11.5] 2.25 [5.7]
Cased hole 4.5 [11.5] 2.25 [5.7]
Well size—max., in [cm]
Open hole No limit No limit
Cased hole No limit No limit
Outside diameter, in [cm] 3.5 [8.9] 1.6875 [4.2]
Length, ft [m] 17.2 [5.24] Twenty levels,† 5-ft spacing: 118 [36]
Twenty levels,† 10-ft spacing: 218 [66.4]
Mud type or weight limitations No fluid restrictions No fluid restrictions
Frequency range, Hz 100–2,000 100–4,000
† Eight hydrophones per level
Measurement Specifications
CSI Imager
Output Seismic waveform produced by acoustic
reflections from bed boundaries
Logging speed Stationary
Seismic waveform recording: 1-, 2-, or 4-ms output
sampling rate
Array capability Up to 4 tools
Sensor package
Length 24.4 in [61.98 cm]
Weight 19.9 lbm [9 kg]
Sensor Geophone accelerometer (GAC-A)
Sensitivity >0.5 V/g ± 5%
Sensor natural frequency 25 Hz
Flat bandwidth in acceleration: 2 to 200 Hz
Dynamic range 90 dB
Distortion <–60 dB
Digitization 16 bit
Combinability Combinable with most tools
Special applications Conveyance on wireline, TLC system, or tractor
Mechanical Specifications
Q-Borehole Explorer Truck
Vehicle length 438 in [11.13 m]
Vehicle wheelbase 265 in [6.73 m]
Vehicle width 101 in [2.56 m]
Vehicle height 151 in [3.84 m]
Vehicle gross weight 59,000 lbm [27,000 kg]
Hold-down weight 54,000 lbm [24,500 kg]
Peak hydraulic force 60,000 lbf [267,000 N]
Baseplate clearance, moving 13 in [33 cm]
Maximum vehicle speed† 70 mi/h [113 km/h]
Emission compliance Deck and vehicle engines:
California and US EPA continental standards
Ambient operating temperature –30 to 130 degF [–34 to 54 degC]
† Subject to local regulations and road conditions
Applications
■ Fixed and moving source
geometries for VSP surveys
■ Sources for all types of terrain
conveyance, high temperature, ■ Sample assurance: single phase and and heavy-ends EOS modeling
high pressure, and harsh operating purity ■ Identification of volatile oil
conditions ■ Identification of compartments and gas condensate
■ Formation pressure measurement and lateral sealing boundaries ■ Determination of gas/oil ratio (GOR)
Measurement Specifications
MDT Forte Tester MDT Forte-HT Tester
Output Formation pressure; ultralow-contamination fluid samples; downhole fluid analysis; flowline
pressure, resistivity, and temperature; permeability and permeability anisotropy; in situ stress
Logging speed Stationary Stationary
Range of measurement Quartz gauge: 750 to 15,000 psi [5 to 103 MPa] Axton gauge: 0 to 30,000 psi [207 MPa] to 374 degF
Resistivity: 0.01 to 20 ohm.m [190 degC] and 0 to 20,000 psi [138 MPa] to
Temperature: –40 to 350 degF [–40 to 177 degC] 392 degF [200 degC]†
Resistivity: 0.01 to 20 ohm.m
Temperature: –40 to 400 degF [–40 to 204 degC]
Resolution Quartz gauge: 0.008 psi [55 Pa] at 1.3-s gate time Axton gauge: 0.008-psi [55-Pa] rms at 1-s gate time
Resistivity: 0.001 ohm.m Resistivity: 0.001 ohm.m
Temperature: 1.0 degF [0.5 degC] Temperature: 1.0 degF [0.5 degC]
Accuracy Quartz gauge: ±(2 psi [13,789 Pa] + 0.01% of reading)‡ Axton gauge: ±2.0 psi [±13,789 Pa] for typical
Resistivity: ±0.01 ohm.m HPHT operational range (>212 degF [>100 degC]
Flowline temperature: ±1.0 degF [±0.5 degC] and >15,000 psi [103 MPa]) and ±6.0 psi
[±41,368 Pa] for full range‡
Resistivity: 0.01 ohm.m
Flowline temperature: ±0.5 degF [±0.2 degC]
Mud type or weight limitations None None
Combinability Fully integrates with Saturn 3D radial probe, Quicksilver Probe focused fluid extraction, and InSitu Fluid Analyzer system
Conveyance on wireline, drillpipe, and UltraTRAC all-terrain wireline tractor
Special applications Downhole fluid analysis at reservoir conditions, interval pressure transient test (IPTT), stress test, mini-DST
† Operating range up to 400 degF [204 degC] and default calibration to 392 degF [200 degC] with calibration to higher temperature on request.
‡ Includes fitting error, hysteresis, repeatability, and some allowance for sensor aging; the corresponding percentages of the pressure reading account for the incertitude of the calibration equipment.
Mechanical Specifications
MDT Forte Tester MDT Forte-HT Tester
Temperature rating 350 degF [177 degC] 400 degF [204 degC]
Pressure rating 20,000, 25,000, and 30,000 psi 20,000 psi
[138, 172, and 207 MPa] [138 MPa]
Borehole size—min. 20,000 psi: 55⁄8 in [14.41 cm] 5⅝ in [14.41 cm]
25,000 and 30,000 psi: 57⁄8 in [14.92 cm]
Borehole size—max. 22 in [55.88 in] 22 in [55.88 in]
Outside diameter† 20,000 psi: 4.75 in [12.07 cm] 4.75 in [12.07 cm]
25,000 psi: 5 in [12.70 cm]
30,000 psi: 5.25 in [13.33 cm]
Length Depends upon configuration Depends upon configuration
Weigh Depends upon configuration Depends upon configuration
Shock and vibration Electronic shock rating: 250 g Electronic shock rating: 250 g
Vibration transmissibility: 3.0 g, 10 to 450 Hz Vibration transmissibility: 3.0 g, 10 to 450 Hz
Tension 160,000 lbf [711,700 N] 160,000 lbf [711,700 N]
Compression‡ 85,000 lbf [378,100 N] 85,000 lbf [378,100 N]
† Tester only, not including probe
‡ At 15,000 psi and 320 degF; the compression rating is a function of temperature and pressure.
MRHY
MRSC
Mechanical Specifications
Saturn Probe
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
High-pressure version: 25,000 psi [172 MPa]
Ultrahigh-pressure version: 30,000 psi [207 MPa]
Borehole size—min. 7-in version: 77⁄8 in [20.0 cm]
9-in version: 97⁄8 in [25.08 cm]
Borehole size—max. 7-in version: 9½ in [24.13 cm]
9-in version: 14½ in [36.83 cm]
Max. hole ovality 20%
Outside diameter Tool body: 4.75 in [12.06 cm]
7-in version drain assembly: 7 in [17.78 cm]
9-in version drain assembly: 8.75 in [22.23 cm]
Length 5.7 ft [1.74 m]
With Modular Reservoir Sonde and Electronics (MRSE): 12.4 ft [3.78 m]
Weight† 7-in version: 385 lbm [175 kg]
9-in version: 485 lbm [220 kg]
Tension Depends on wellbore pressure and temperature
Compression Depends on wellbore pressure and temperature
† In air, fully assembled on a mandrel
Mechanical Specifications
Quicksilver Probe Extraction
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
High-pressure version: 30,000 psi [207 MPa]
Borehole size—min. 6 in [15.24 cm]
Borehole size—max. 14 in [35.56 cm]
Outside diameter 4.75 in [12.07 cm]
While sampling: 5 in [12.70 cm]
High-pressure version: 5.25 in [13.34 cm]
Length Probe module: 8.48 ft [2.58 m]
Weight 308 lbm [140 kg]
High-pressure version: 351 lbm [159 kg]
Tension 160,000 lbf [711,710 N]
Compression† 85,000 lbf [378,100 N]
† At 15,000 psi [103 MPa] and 320 degF [160 degC]. The compressive load is a function of temperature and pressure.
The InSitu Fluid Analyzer system grating spectrometer has 16 channels oscillates in two perpendicular modes
is used to acquire InSitu Family focused on the 1,600- to 1,800‑nm range, within the fluid. Simple physical models
downhole quantitative fluid properties where reservoir fluid has characteristic describe the resonance frequency and
measurements for real-time downhole absorptions that reflect molecular quality factor of the sensor in relation to
fluid analysis (DFA): structure. Measurement of the Vis-NIR the fluid density. Dual-mode oscillation
■ hydrocarbon composition spectrum by the two spectrometers is is superior to other resonant techniques
(C1, C2, C3–C5, and C6+) used for the DFA of fluid hydrocarbon because it minimizes the effects of
■ gas/oil ratio (GOR)
composition, water content, and mud pressure and temperature on the sensor
filtrate contamination. The CO2 content through common mode rejection, which
■ live-oil density and viscosity
is determined from the spectrometer further improves the accuracy of the
■ CO2 measurements by the InSitu CO2* measurement. The measurement is
■ pH of water (aquifer, connate, reservoir fluid CO2 sensor. made under flowing conditions, and the
injection, or water-base mud resonator is resistive to corrosive fluids.
[WBM] filtrate)
InSitu GOR sensor
■ reservoir fluid color
From the enhanced composition mea- InSitu Viscosity sensor
■ free-gas detection
surement, the InSitu GOR* reservoir The InSitu Viscosity* reservoir fluid
■ downhole fluorescence (dew fluid sensor determines the GOR and viscosity sensor measures viscosity
precipitation in retrograde gas condensate/gas ratio (CGR) from the under flowing conditions with either
condensates) vaporizations of the hydrocarbon and a dual-mode microresonator rod or a
■ flowline pressure and temperature CO2 components at standard conditions vibrating wire. Which technology is used
(regime of sample chamber, not for flashing a live fluid. depends on the downhole and reservoir
the probe) conditions.
■ resistivity of reservoir water
InSitu Color sensor
■ oil-base mud (OBM) filtrate
With optical filters improved for InSitu Fluorescence sensor
contamination. high-temperature performance, the The InSitu Fluorescence* reservoir
InSitu Color* reservoir fluid color sen- fluid fluorescence sensor detects free
sor uses the extended measurement gas bubbles and retrograde conden-
InSitu Composition and range of the 20-channel filter array sate liquid dropout for single-phase
InSitu CO2 sensors spectrometer to determine fluid color. assurance while conducting DFA and
Because quantified DFA is based The reliability of the measurement sampling. Fluid type is also identified.
on optical absorption spectroscopy, is supported by continuous real-time The resulting fluid phase information
the InSitu Composition* reservoir autocalibration, application of a con- is especially useful for defining the
fluid composition measurement uses tamination algorithm that uses all the difference between retrograde con-
the first downhole deployment of a spectrometer channels, and a coated- densates and volatile oils, which can
laboratory-grade grating spectrometer window detection flag for enhanced QC. have similar GORs and live-oil densi-
in addition to the conventional filter The color measurement supports fluid ties. Because the fluorescence mea-
array spectrometer. The filter array identification, determination of asphal- surement is also sensitive to liquid
spectrometer measures wavelengths in tene gradients, and pH measurement. precipitation from a condensate gas
the visible to near-infrared (Vis-NIR) when the flowing pressure falls below
range from 400 to 2,100 nm across the dewpoint, it can be used to monitor
20 channels that indicate the color and InSitu Density sensor phase separation in real time to ensure
molecular vibration absorptions of the The InSitu Density reservoir fluid density the collection of representative single-
reservoir fluid and also show the main measurement is based on the resonance phase samples.
absorption peaks of water and CO2. The characteristics of a vibrating rod that
sampling operations in WBM. ple-well analysis, defining reservoir and thermogenic dry gas
architecture across the entire field. ■ Identification of volatile oil
Quantification of the variation of fluid and gas condensate
Pressure and properties at higher resolution than ■ Determination of GOR and CGR
temperature sensors conventional sampling and analysis is
The high-resolution pressure and key to identifying and differentiating
temperature sensors incorporated in compositional grading, fluid contacts,
Schlumberger formation testing tools and reservoir compartments.
are used in the InSitu Fluid Analyzer For integrated analysis, compre-
system. Direct measurement of pressure hensive InSitu Pro* real-time quality
and temperature is essential to identify control and interpretation software
the position in the PVT envelope where combines the results of pressure and
the other fluid properties, such as den- fluids analysis from multiple data
sity, are measured, especially when the sources.
sensors are placed downstream of the
Mechanical Specifications
InSitu Fluid Analyzer System
Temperature rating 350 degF [177 degC]
Pressure rating 25,000 psi [172 MPa]
Borehole size—min. 6 in [15.24 cm]
Borehole size—max. Determined by probe or packer
Outside diameter Determined by probe or packer
Length 10.43 ft [3.18 m]
Weight 368 lbm [167 kg]
Tension 160,000 lbf [711,710 N]
Compression 85,000 lbf [378,100 N]
The comprehensive depth view from InSitu Pro software combines the results of pressure and fluids analysis
from multiple data sources.
Mechanical Specifications
MRDP
Temperature rating 392 degF [200 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 7⅝ in [19.37 cm]
Borehole size—max. 13¼ in [33.65 cm]
Outside diameter 6 in [15.24 cm]
Length 6.75 ft [2.06 m]
MRDP-BA, MRDP-BB, MRDP-BC,
and MRDP-BX: 8.6 ft [2.62 m]
Weight 298 lbm [135 kg]
Tension† 160,000 lbf [711,710 N]
Compression† 85,000 lbf [378,100 N]
H₂S service Yes
† At 15,000 psi [103 MPa] and 320 degF [160 degC]. These ratings apply to all MDT tester modules except the MRPA.
The compressive load is a function of temperature and pressure.
Mechanical Specifications
MRFC
Temperature rating 392 degF [200 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 5⅝ in [14.29 cm]
Borehole size—max. 22 in [55.88 cm]
Outside diameter 4.75 in [12.07 cm]
Length 7.58 ft [2.31 m]
Weight 250 lbm [113 kg]
Tension† 160,000 lbf [711,710 N]
Compression† 85,000 lbf [378,100 N]
H₂S service Yes
† At 15,000 psi [103 MPa] and 320 degF [160 degC]. These ratings apply to all MDT tester modules except the MRPA.
The compressive load is a function of temperature and pressure.
Mechanical Specifications
MRPO
Temperature rating 392 degF [200 degC]
Pressure rating† 20,000 psi [138 MPa]
Borehole size—min. 5⅝ in [14.29 cm]
Borehole size—max. 22 in [55.88 cm]
Outside diameter 4.75 in [12.07 cm]
Length 10.63 ft [3.24 m]
Weight 340 lbm [154 kg]
Tension‡ 160,000 lbf [711,710 N]
Compression‡ 85,000 lbf [378,100 N]
H₂S service Yes
† 25,000-psi [172-MPa] and 30,000-psi [207-MPa] versions are available upon request.
‡ At 15,000 psi [103 MPa] and 320 degF [160 degC]. These ratings apply to all MDT modular formation dynamics tester modules
except the Dual-Packer Module (MRPA). The compressive load is a function of temperature and pressure.
Mechanical Specifications
LFA Live Fluid Analyzer
Temperature rating 350 degF [177 degC]
Pressure rating† 20,000 psi [138 MPa]
Borehole size—min. 5⅝ in [14.29 cm]
Borehole size—max. 22 in [55.88 cm]
Outside diameter 4.75 in [12.07 cm]
Length 6.17 ft [1.88 m]
Weight 187 lbm [85 kg]
H₂S service Yes
† 25,000-psi [172-MPa] and 30,000-psi [207-MPa] versions are available upon request.
Mechanical Specifications
CFA Analyzer
Temperature rating 350 degF [177 degC]
Pressure rating† 20,000 psi [138 MPa]
Borehole size—min. 5⅝ in [14.29 cm]
Borehole size—max. 22 in [55.88 cm]
Outside diameter 4.75 in [12.07 cm]
Length 5.1 ft [1.55 m]
With handling caps: 6.6 ft [2.01 m]
Weight 161 lbm [73 kg]
H₂S service Yes
† 25,000-psi [172-MPa] and 30,000-psi [207-MPa] versions are available upon request.
Conducting low-shock sampling with of the cylinder. Beneath the piston in pressure. When the valve at the top
the MDT modular formation dynamics the cylinder is water. Because there of the cylinder was opened, a sudden
tester limits the pressure drawdown is an opening at the bottom, the water pressure reduction occurred. The
during fluid extraction and sampling. pressure in the cylinder is equal to the reduction was typically sufficiently large
This approach helps avoid crossing wellbore hydrostatic pressure. Sample to induce phase separation, resulting in
the bubblepoint pressure, which would capture begins by opening the valve an unrepresentative sample. It could
induce a two-phase condition in the at the top and pumping fluid into the even cause a shock so large that the
flowline and the sample chambers. The bottle rather than to the wellbore. formation would collapse, resulting in a
successful collection of representative The entering fluid pushes the piston loss of seal and the entry of drilling fluid
pressure-volume-temperature (PVT) down and causes the water to exit to to the tool.
samples also requires low filtrate con- the wellbore. Because the pump is The Dual-Packer Module (MRPA)
tamination, which is determined by pushing fluid to the wellbore, there is can be used in low-shock sampling to
using the LFA live fluid analyzer. no change in the flowing pressure fol- further reduce the pressure drawdown
The sample chambers and bottles lowing opening of the valve. With this caused by the area of flow.
consist of a cylinder with a valve at innovative technique, low-shock sam- In addition to enabling single-phase
the top and opening at the bottom and pling minimizes pressure disruption. sample recovery, low-shock sampling
contain a sliding piston. While the fluid Previous methods of sampling did not avoids breaking down the formation
is pumped from the formation to the employ an opening at the bottom of the while sampling in unconsolidated
wellbore, the valve at the top is closed chamber. Before sampling, the internal reservoirs, which would cause the
and the piston is positioned at the top pressure was close to the atmospheric mobilization and flow of sand grains.
Mechanical Specifications
MRMS
Temperature rating 392 degF [200 degC]
Pressure rating† 20,000 psi [138 MPa]
Borehole size—min. 5⅝ in [14.29 cm]
Borehole size—max. 22 in [55.88 cm]
Outside diameter 5 in [12.70 cm] (max.)
Length 13.19 ft [4.02 m]
Weight 465 lbm [211 kg] (max.)
Tension‡ 160,000 lbf [711,710 N]
Compression‡ 85,000 lbf [378,100 N]
† 25,000-psi [172-MPa] and 30,000-psi [207-MPa] versions are available on request.
‡ At 15,000 psi [103 MPa] and 320 degF [160 degC]. These ratings apply to all MDT tester modules except the Dual-Packer Module (MRPA).
The compressive load is a function of temperature and pressure.
temperature and low-permeability 14 h at 450 degF [232 degC] density with gradients and gas/oil/
environments ■ Pressure profiles and mobility water contacts
■ Measurements from the first
measurements to combine
logging run, in tool combinations with petrophysical, seismic,
with most wireline logging services and conventional log data for
developing a static reservoir model
Measurement Specifications
Output Formation pressure, fluid mobility
Logging speed Stationary
Set and retract time: 15 s
Range of measurement Max. measured overbalance: 8,000 psi [55 MPa]
Pretest volume: 0.1 to 37 cm³
Pretest rate: 0.02 to 2 cm³/s
Resolution Quartzdyne gauge: 0.01 psi [29 Pa/s]
Secondary Sapphire* gauge: 0.4 psi [276 Pa] at 1 Hz
Flowline temperature: 0.18 degF [0.1 degC]
Accuracy Quartzdyne gauge: ±(0.02% of full scale + 0.01% of reading)
Secondary Sapphire gauge: ±(5 psi [34 kPa] + 0.01% of reading)
Flowline temperature: ±3.6 degF [±2 degC]
Mud type or weight limitations None
Combinability Combinable with SlimXtreme platform and most openhole tools
Special applications High-temperature operations, slim wellbores
Mechanical Specifications
Temperature rating† 450 degF [232 degC] for 14 h
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 4¾ in [12.07 cm]
Borehole size—max. 14.5 in [36.83 cm]
Outside diameter Tool: 3.75 in [9.53 cm]
Tool with bumpers or probe section without bumpers: 4.0625 in [10.32 cm]
Length 30.2 ft [9.2 m]
Weight 730 lbm [310 kg]
Tension 50,000 lbf [222,410 N]
Compression 22,000 lbf [97,860 N]
† For operations > 400 degF [204 degC], contact your Schlumberger representative for information on required operating procedures.
Mechanical Specifications
XPT-B XPT-C
Temperature rating 302 degF [150 degC] 320 degF [160 degC]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa]
With CQG gauge: 15,000 psi [103 MPa] With CQG gauge: 15,000 psi [103 MPa]
Borehole size—min. 4.75 in [12.07 cm] 4.75 in [12.07 cm]
Borehole size—max. 14.5 in [36.83 cm] 14.5 in [36.83 cm]
Outside diameter Tool: 3.375 in [8.57 cm] Tool: 3.375 in [8.57 cm]
Probe section: 3.875 in [9.84 cm] Probe section: 3.875 in [9.84 cm]
Length 21.31 ft [6.49 m] 21.54 ft [6.57 m]
Weight 450 lbm [204 kg] 451 lbm [205 kg]
Tension 50,000 lbf [222,410 N] 50,000 lbf [222,410 N]
Compression 22,000 lbf [97,860 N] 22,000 lbf [97,860 N]
Measurement Specifications
SRFT Tester
Output Pressure measurement, fluid samples
Logging speed Stationary measurements
Range of measurement 0 to 20,000 psi [0 to 138 MPa] at up to
350 degF [177 degC]
Accuracy CQG gauge:
Accuracy: ±(2 psi [13,789 Pa] + 0.01% of reading)
Resolution: 0.02 psi [138 Pa] at 1-s gate time
Strain gauge: 5,000-, 10,000-, and 20,000-psi
[34-, 69-, and 138-MPa] ranges
Accuracy: ±0.1% of full scale
Resolution: 0.001% of full scale
Special applications Slim or restricted holes
Mechanical Specifications
CHDT Tester
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Max. underbalance: 4,000 psi [27 MPa]
Plug rating: 10,000 psi [69 MPa] (bidirectional)
Casing size—min. 5½ in [13.97 cm]
Casing size—max. 9⅝ in [24.45 cm]
Outside diameter 4.25 in [10.79 cm]
Length Pressure measurement only: 34.1 ft [10.4 m]
Optional sample chamber: 9.7 ft [2.96 m]
Weight Depends on configuration
Tension Depends on configuration
Compression Depends on configuration
Mechanical Specifications
Temperature rating 350 degF [177 degC]†
Pressure rating Standard: 25,000 psi [173 MPa]
High pressure: 30,000 psi [207 MPa]
Borehole size—min. 7.5 in [19.05 cm]
Borehole size—max. 19 in [49.53 cm]
Outside diameter 6.5 in [16.51 cm]‡
Length 36.5 ft [11.2 m]
Weight (in air) 970 lbm [440 kg]
Tension 22,900 lbf [101,860 N]
Compression 12,500 lbf [55,600 N]
† Can be run at 400 degF [204 degC] with a Dewar flask
‡ At the coring bit assembly
Measurement Specifications
MSCT Tool
Output Sidewall core samples†
Logging speed Stationary
Coring time (avg.): 3 to 5 min per core
Range of measurement Core size: 2 in [50.8 mm] long × 0.92 in
[23.4 mm] diameter
Depth of core sample Core length: 1.5 or 1.75 in [38.1 or 44.4 mm]
Mud type or weight limitations None
Special applications
† The MCFU-AA is used for 50 cores per descent and the MCCU is used for 20 cores per descent.
Mechanical Specifications
MSCT Tool
Temperature rating 350 degF [177 degC]†
Pressure rating Standard: 20,000 psi [138 MPa]
High pressure: 25,000 psi [172 MPa]
Borehole size—min. 6¼ in [15.87 cm]
Borehole size—max. 19 in [48.26 cm]
Outside diameter 5.375 in [13.65 cm]‡
Length 31.29 ft [9.54 m]
Weight 750 lbm [340 kg]§
Tension 22,900 lbf [101,860 N]
Compression 12,500 lbf [55,600 N]
† The MSCT-A can be run at 400 degF [204 degC] with a Dewar flask (UDFH-KF).
Successful jobs have also been performed at 425 degF [218 degC].
‡ With the standoffs removed, the MSCT tool can be stripped down to 5 in [12.70 cm] and run in 5⅞-in [14.92-cm] holes.
§ The sonde weighs 580 lbm [263 kg].
in a stuck CST sample taker. ■ Oil, gas, and water volume estimates
Measurement Specifications
CST Sample Taker
Output Sidewall cores
Logging speed Stationary
Mud type or weight limitations Hydrostatic pressure and formation characteristics determine
charge selection
Combinability Usually run with PGGT* powered gun gamma tool for correlation
Up to 3 guns can be used to collect a maximum of 90 core samples
Special applications H₂S service
Mechanical Specifications
CST Sample Taker
Temperature rating Explosive charges: 280 degF [138 degC]
for 1 h or 450 degF
[232 degC] for 1 h
Pressure rating 20,000 psi [138 MPa]
Borehole size—min.† 4⅛ in [10.48 cm]
Borehole size—max.† 25 in [63.50 cm]
Outside diameter† 3.375 to 5.25 in [8.57 to 13.33 cm]
Length† 6.83 to 17.08 ft [2.08 to 5.21 m]
Weight† 125 to 406 lbm [57 to 184 kg]
Tension 50,000 lbf [222,410 N]
Compression 23,000 lbf [102,310 N]
† Depends on the gun, see “CST Sample Taker Specifications”
Mechanical Specifications
Isolation Scanner Service
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Casing size—min.† 4½ in (min. pass-through restriction: 4 in [10.16 cm])
Casing size—max.† 13⅜ in
Outside diameter IBCS-A: 3.375 in [8.57 cm]
IBCS-B: 4.472 in [11.36 cm]
IBCS-C: 6.657 in [16.91 cm]
IBCS-D: 8.736 in [22.19 cm]
Length Without sub: 19.73 ft [6.01 m]
IBCS-A sub: 2.01 ft [0.61 m]
IBCS-B sub: 1.98 ft [0.60 m]
IBCS-C sub: 1.98 ft [0.60 m]
IBCS-D sub: 1.98 ft [0.60 m]
Weight Without sub: 333 lbm [151 kg]
IBCS-A sub: 16.75 lbm [7.59 kg]
IBCS-B sub: 20.64 lbm [9.36 kg]
IBCS-C sub: 23.66 lbm [10.73 kg]
IBCS-D sub: 24.55 lbm [11.13 kg]
Sub max. tension 2,250 lbf [10,000 N]
Sub max. compression 12,250 lbf [50,000 N]
† Limits for casing size depend on the sub used. Data can be acquired in casing larger than 9⅝ in with low-attenuation mud (e.g., water, brine).
Cement bond tools measure the bond The QSLT can also make a short-
between the casing and the cement spacing (1-ft [0.30-m]) CBL measure-
placed in the annulus between the ment for cement evaluation in fast
casing and the wellbore. The mea- formations. The two transmitters and
surement is made by using acoustic six receivers of the QSLT sonde have
sonic and ultrasonic tools. In the case transmitter–receiver spacings of 1,
of sonic tools, the measurement is 3, 3.5, 4, 4.5, and 5 ft [0.30, 0.91, 1.07,
usually displayed on a cement bond 1.22, 1.37, and 1.52 m] to compute the
log (CBL) in millivolt units, decibel following:
attenuation, or both. Reduction of the ■ standard 3-ft CBL and 5-ft VDL
reading in millivolts or increase of the measurements
decibel attenuation is an indication of ■ borehole-compensated (BHC)
better-quality bonding of the cement
attenuation from the 3.5- and
behind the casing to the casing wall.
4.5-ft-spacing receivers
Factors that affect the quality of the
■ near-pseudoattenuation from the
cement bonding are
■ cement job design and execution
3-ft-spacing receivers
■ short-spacing attenuation from the
as well as effective mud removal
■ compressive strength of the
1-ft-spacing receiver for cement
bond measurement in fast forma-
cement in place
tions that may affect the standard
■ temperature and pressure
3-ft spacing.
changes applied to the casing
after cementing
■ epoxy resin applied to the outer Cement bond log from
wall of the casing. Digital Sonic Logging Tool
The Digital Sonic Logging Tool (DSLT)
uses the Sonic Logging Sonde (SLS)
SlimXtreme Sonic to measure the cement bond ampli-
Logging Tool tude and provide a VDL display for
The SlimXtreme Sonic Logging Tool evaluation of the cement bond qual-
(QSLT) is a digital sonic tool for ity of a cemented casing string. VDL
DSLT
evaluating the cement bond quality or x-y waveform display of the sonic
of cemented casing in high-pressure signal is presented in conjunction with
and high-temperature slim holes. The the bond index and amplitude signal. Memory Slim
QSLT provides conventional openhole The DSLT is also used in the open QSLT
CBL Tool
sonic measurements, standard CBL borehole environment for conventional SCMT
amplitude and Variable Density log sonic measurements of BHC (3- to 5-ft)
(VDL), and attenuation measure- transit time and long-spacing
ments, which are less affected by the depth-derived BHC (DDBHC) (9- to HSLT
borehole environmental conditions. 11-ft [2.74 to 3.35-m]) transit time.
Measurement Specifications
QSLT DSLT HSLT SCMT-C and SCMT-H Memory Slim CBL Tool
Output 3-ft [0.91-m] CBL and attenuation, 3-ft [0.91-m] amplitude CBL 3-ft [0.91-m] amplitude CBL, 5-ft [1.52-m] 3-ft [0.91-m] amplitude CBL, 5-ft [1.52-m] 3-ft [0.91-m] CBL, 5-ft [1.52-m]
1-ft [0.30-m] attenuation, 5-ft [1.52-m] With SLS-C and SLS-D: 5-ft [1.52-m] Variable Density log Variable Density log, cement bond variation map Variable Density log, gamma ray, CCL,
Variable Density log Variable Density log traveltime, cement compressive strength
Logging speed 3,600 ft/h [1,097 m/h] 3,600 ft/h [1,097 m/h] 3,600 ft/h [1,097 m/h] 1,800 ft/h [549 m/h] 1,800 ft/h [549 m/h]
Vertical resolution Near attenuation: 1 ft [0.30 m] CBL: 3 ft [0.91 m] CBL: 3 ft [0.91 m] CBL: 3 ft [0.91 m] CBL: 3 ft [0.91 m]
CBL: 3 ft [0.91 m] VDL: 5 ft [1.52 m] VDL: 5 ft [1.52 m] VDL: 5 ft [1.52 m] VDL: 5 ft [1.52 m]
VDL: 5 ft [1.52 m] Cement bond variation map: 2 ft [0.61 m]
Depth of investigation CBL: Casing and cement interface CBL: Casing and cement interface CBL: Casing and cement interface CBL: Casing and cement interface CBL: Casing and cement interface
VDL: Depends on bonding and formation VDL: Depends on bonding and formation VDL: Depends on bonding and formation VDL: Depends on bonding and formation VDL: Depends on bonding and formation
Combinability Part of SlimXtreme platform Combinable with most tools Part of Xtreme platform, Combinable with PS Platform platform Combinable with PS Platform platform
combinable with most tools
Special applications Logging through drillpipe, tubing, Logging through drillpipe, tubing, Logging through drillpipe, tubing,
and in small casing and in small casing and in small casing
Fast formations Fast formations
Mechanical Specifications
QSLT DSLT HSLT SCMT-C and SCMT-H Memory Slim CBL Tool
Temperature rating 500 degF [260 degC] 302 degF [150 degC] 500 degF [260 degC] SCMT-C: 302 degF [150 degC] 302 degF [150 degC]
SCMT-H: 392 degF [200 degC]
Pressure rating 30,000 psi [207 MPa] 20,000 psi [138 MPa] 25,000 psi [172 MPa] 15,000 psi [103 MPa] 15,000 psi [103 MPa]
Casing size—min. 4½ in [11.43 cm] 5½ in [13.97 cm] 5½ in [13.97 cm] SCMT-C: 2⅜ in [6.03 cm] 2⅞ in [7.30 cm]
SCMT-H: 2⅞ in [7.30 cm]
Casing size—max. 8⅝ in [21.91 cm] 13⅜ in [33.97 cm] 13⅜ in [33.97 cm] 7⅝ in [19.37 cm] 7⅝ in [19.37 cm]
Outside diameter 3 in [7.62 cm] 3.625 in [9.21 cm] 3.875 in [9.84 cm] SCMT-C: 1.6875 in [4.29 cm] 1.6875 in [4.29 cm]
SCMT-H: 2.06 in [5.23 cm]
Length Without inline centralizer: 23 ft [7 m] With SLS-E: 20.63 ft [6.29 m] 25.5 ft [7.77 m] SCMT-C: 23.45 ft [7.14 m] 23.45 ft [7.15 m]
With inline centralizer: 29.9 ft [9.11 m] With SLS-F: 23.81 ft [7.26 m] SCMT-H: 28.85 ft [8.79 m]
Weight† 270 lbm [122 kg] With SLS-E: 313 lbm [142 kg] 440 lbm [199 kg] SCMT-C: 100 lbm [45 kg] 100.2 lbm [45.4 kg]
With SLS-F: 353 lbm [160 kg] SCMT-H: 162 lbm [73 kg]
Tension 13,000 lbf [57,830 N] 29,700 lbf [132,110 N] 20,000 lbf [88,960 N] 5,900 lbf [26,240 N] 5,900 lbf [26,240 N]
Compression 4,400 lbf [19,570 N] 2,870 lbf [12,270 N] 6,000 lbf [26,690 N] 150 lbf [670 N] 150 lbf [670 N]
† In air
Mechanical Specifications
USI Imager
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Casing size—min. 4½ in [11.43 cm]
Casing size—max. 20 in [50.80 cm]
Outside diameter† 3.375 in [8.57 cm]
Length† 19.75 ft [6.02 m]
Weight† 333 lbm [151 kg]
Tension 40,000 lbf [177,930 N]
Compression 4,000 lbf [17,790 N]
† Excluding the rotating sub
Mechanical Specifications
EM Pipe Scanner Tool
Temperature rating 302 degF [150 degC]
Pressure rating 15,000 psi [103 MPa]
Casing size—min. 2⅞ in (ID > 2.313 in)
Casing size—max. 13⅜ in for electromagnetic thickness
Outside diameter 2.125 in [5.4 cm]
Pad sensor arms 18 coupled
Max. diameter 9⅝-in casing
100% image coverage 7-in casing
Length 19.7 ft [6.0 m]
Weight 110 lbm [50 kg]
Tension Fishing: 10,000 lbf [44,480 N]
Compression Fishing: 3,000 lbf [13,340 N]
Mechanical Specifications
UCI Imager
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Casing size—min.† 4½ in [11.43 cm]
Casing size—max.† 13⅜ in [33.97 cm]
Outside diameter USRS-AB: 3.41 in [8.66 cm]
USRS-A: 3.56 in [9.04 cm]
USRS-B: 4.65 in [11.81 cm]
USRS-C: 6.69 in [16.99 cm]
USRS-D: 8.66 in [22.00 cm]
Length Without sub: 19.73 ft [6.01 m]
Weight Without sub: 333 lbm [151 kg]
Tension 40,000 lbf [177,930 N]
Compression 4,000 lbf [17,790 N]
† Minimum and maximum casing sizes depend on the sub used.
Applications
■ Identification and quantification
of corrosion damage
■ Identification of scale, wax,
and solids accumulation
■ Monitoring of anticorrosion
systems
■ Location of mechanical damage
diameter PMIT-B
PMIT-A
Mechanical Specifications
PMIT-A PMIT-B PMIT-C
Temperature rating, degF [degC] 302 [150] 302 [150] PMIT-CA: 302 [150]
PMIT-CB: 350 [177]
Pressure rating, psi [MPa] 15,000 [103] 15,000 [103] PMIT-CA: 15,000 [103]
PMIT-CB: 20,000 [138]
Outside diameter, in [cm] Standard or extended fingers: 2.75 [6.99] Standard fingers: 4 [10.16]
1.6875 [4.29] Extended fingers: 5.5 [13.97]
Fingers 24 40 60
Fingertip radius, in [mm] 0.06 [1.5] 0.05 [1.27] 0.06 [1.52]
Finger width, in [mm] 0.063 [1.6] 0.063 [1.6] 0.063 [1.6]
Length, ft [m] 11.88 [3.62] (with centralizers) 8.86 [2.70] 10.34 [3.15]
Weight, lbm [kg] 56.5 [26] (with centralizers) 87.4 [40] 120 [54]
Tensile strength, lbf [N] 10,000 [44,480] 10,000 [44,480] 10,000 [44,480]
Compressive strength, N [lbf] 1,850 [8,230] 2,500 [11,120] 2,500 [11,120]
Mechanical Specifications
Flow Scanner System
Temperature rating 350 degF [177 degC]
Pressure rating 15,000 psi [103 MPa]
Borehole size—min. 2⅞ in [7.30 cm]†
Borehole size—max. 9 in [22.86 cm]
Outside diameter 1.6875 in [4.29 cm]
High-temperature (>302 degF [>150 degC]):
2.25 in [5.72 cm]
Length Flow Scanner system tool:
11.6 ft [3.54 m]
With basic measurement sonde, swivel, and head:
26.2 ft [7.99 m]
Weight 108 lbm [49 kg]
Max. tension 10,000 lbf [44,480 N]
Max. compression 1,000 lbf [4,450 N]
† Min. restriction is 1.813 in [4.61 cm].
an optional component for measuring (PUCS) provides an optional high-res- can be run in conjunction with the
bidirectional fluid velocity inside the olution pressure measurement. This PS Platform platform for cement
tubing or as a backup spinner, nor- additional measurement capability is bond and Variable Density logs in
mally in higher flow rates. typically used to make transient mea- casing. A radial cement map is also
surements for reservoir characteriza- available in surface-readout mode.
tion and monitoring.
Measurement Specifications
PS Platform Production Logging Platform
Output Flow rate, fluid density, pressure, temperature, water holdup, gas holdup,
caliper, relative bearing, tool acceleration
With SCMT: CBL, VDL, surface-readout radial cement map
Logging speed Stationary to variable based on the application
Range of measurement See individual sensor listing
Accuracy See individual sensor listing
Depth of investigation Wellbore measurements
Mud type or weight limitations Relatively clean fluids
Combinability Combinable with SCMT tool and PS Platform Multifinger Imaging Tool (PMIT)
Special applications Conveyance on drillpipe, tubing, coiled tubing, or slickline
Mechanical Specifications
PS Platform Production Logging Platform
Temperature rating 302 degF [150 degC]
PILS: 350 degF [177 degC]
High-temperature† and memory (only PBMS, PFCS, and PGMS sensors): 374 degF [190 degC]
High-temperature† and surface readout (only PBMS, PFCS, and PGMS sensors): 392 degF [200 degC]
Pressure rating Sapphire gauge: 10,000 psi [69 MPa]
CQG and high-pressure Sapphire gauges: 15,000 psi [103 MPa]
Borehole size—min.‡ 2⅜ in [6.03 cm]
Borehole size—max. PFCS caliper: 11 in [27.94 cm]
Other sensors: No limit
Outside diameter Without rollers: 1.6875 in [4.29 cm]
With rollers: 2.125 in [5.40 cm]
High temperature: 2.06 in [5.23 cm]
Length§ PBMS: 8.27 ft [2.52 m]
PFCS: 5.14 ft [1.57 m]
PGMS: 4.8 ft [1.46 m]
GHOST tool: 7.1 ft [2.16 m]
FloView tool: 6.8 ft [2.07 m]
PILS: 3.1 ft [0.94 m]
UNIGAGE gauge: 4.2 ft [1.28 m]
Weight§ PBMS: 38.3 lbm [17.4 kg]
PFCS: 19.7 lbm [9.0 kg]
PGMS: 29.5 lbm [13.4 kg]
GHOST tool: 57.7 lbm [26.2 kg]
FloView tool: 16 lbm [7.3 kg]
PILS: 12.5 lbm [5.7 kg]
UNIGAGE gauge: 33 lbm [15 kg]
† High-temperature tools include the High-Temperature Basic Measurement Sonde (HBMS) and the High-Temperature Gradio flowmeter tool (HGFT).
These two components provide the same measurements as the PBMS, PGMS, and PFCS.
‡ Min. tubing size
§ The high-temperature tool (including all sensors) has a length of 23.94 ft [7.30 m] and a weight of 190.2 lbm [86.3 kg].
Measurement Specifications
RSTPro Tool for WFL Water Flow Log
Output Velocity of water flowing inside the borehole
or outside the casing
Logging speed Stationary measurements
Range of measurement 3 to 210 ft/min [0.9 to 64 m/min] for
4.9-in [12.45-cm] ID casing
Vertical resolution Depends on water velocity
Accuracy ±5%
Depth of investigation For flow behind casing: 6 in [15.24 cm]
Mud type or weight limitations None
Combinability Combinable with additional gamma ray sensor,
PS Platform platform tools (only surface readout),
RST-C RST-D and CPLT tool
Special applications Inverted RSTPro tool measures downward flow inside
the borehole or outside the casing
H₂S service
Measurement Specifications
RSTPro Tool with Silica Activation
Output Silica-activated gamma ray curve, images of sand placement and deficiencies
Logging speed 1,800 ft/h [549 m/h]
Vertical resolution �15 in [�38 cm]
Depth of investigation �10 in [�25 cm]
Mud type or weight limitations None
Combinability Combinable with PS Platform platform (only surface readout), CPLT tool, gamma ray
Special applications H₂S service
Mechanical Specifications
RST-C RST-D
Temperature rating 302 degF [150 degC] 302 degF [150 degC]
With flask: 400 degF [204 degC] With flask: 400 degF [204 degC]
Pressure rating 15,000 psi [103 MPa] 15,000 psi [103 MPa]
With flask: 20,000 psi [138 MPa] With flask: 20,000 psi [138 MPa]
Borehole size—min. 113⁄16 in [4.60 cm] 3 in [7.62 cm]
Borehole size—max. 9⅝ in [24.45 cm] 9⅝ in [24.45 cm]
Outside diameter 1.71 in [4.34 cm] 2.51 in [6.37 cm]
Length 23.0 ft [7.01 m] 22.2 ft [6.76 m]
Weight 101 lbm [46 kg] 208 lbm [94 kg]
Tension 10,000 lbf [44,480 N] 10,000 lbf [44,480 N]
Compression 1,000 lbf [4,450 N] 1,000 lbf [4,450 N]
Measurement Specifications
CPLT Tool
Output Flow rate, fluid density, temperature, pressure, caliper
Logging speed Stationary to variable based on application
Range of measurement Spinner: 0.5 to 100 rps
Density: 0 to 2 g/cm3
Temperature: –13 to 350 degF [–25 to 177 degC]
Pressure: 0 to 10,000 psi [0 to 69 MPa]
Caliper: 2 to 18 in [5.08 to 45.72 cm]
Vertical resolution Spinner, temperature, pressure, and caliper:
Point of measurement
Density: 15 in [38.10 cm]
Accuracy Spinner: ±0.1 rps
Density: ±0.04 g/cm3 (accuracy), 0.004 g/cm3 (resolution)
Temperature: ±1.8 degF [±1 degC] (accuracy),
0.011 degF [0.006 degC] (resolution)
Pressure: ±10 psi [±0.07 MPa] (accuracy),
0.1 psi [689 Pa] (resolution)
Depth of investigation Borehole measurement only
Mud type or weight limitations None
Combinability Combinable with most production logging services
Special applications H₂S service
Mechanical Specifications
CPLT Tool
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 125⁄32-in [4.52-cm] seating nipple
Borehole size—max. 18 in [45.72 cm]
Outside diameter With Continuous Flowmeter Sonde CFS-H: 1.6875 in [4.29 cm]
With CFS-J: 2.125 in [5.40 cm]
With CFS-K: 2.875 in [7.30 cm]
Length Basic tool body: 15.2 ft [4.6 m]
Weight Basic tool body: 75 lbm [34 kg]
Tension 10,000 lbf [44,480 N]
Compression 1,000 lbf [4,450 N]
Measurement Specifications
CGRS
Output Gamma ray activity
Logging speed Up to 3,600 ft/h [1,097 m/h]
Range of measurement 0 to 2,000 gAPI
Vertical resolution 12 in [30.48 cm]
Accuracy ±5%
Depth of investigation 24 in [60.96 cm]
Mud type or weight limitations None
Combinability Combinable with CPLT tool, RSTPro tool
Special applications H₂S service
Mechanical Specifications
CGRS
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 113⁄16 in [4.60 cm]
Borehole size—max. No limit
Outside diameter 1.6875 in [4.29 cm]
Length 3.2 ft [0.97 m]
Weight 16 lbm [7 kg]
Tension 10,000 lbf [44,480 N]
Compression 1,000 lbf [4,450 N]
Measurement Specifications
PVS
Output PVL phase velocity log
Logging speed Stationary
Range of measurement Phase velocity: 4 to 500 ft/min [1.2 to 152 m/min]
Vertical resolution Depends on ejector–detector spacing
Accuracy ±5%
Depth of investigation Borehole
Mud type or weight limitations Produced or injected fluids
Combinability PS Platform production services platform
(only surface readout)
Measurement Specifications
FloView Tool
Output Bubble count, water holdup, caliper
Logging speed Stationary to variable based on application
Range of measurement Caliper: 2 to 9 in [5.08 to 22.86 cm]
Vertical resolution Point of measurement
Accuracy Water holdup (Hw): ±5% (±2% for Hw > 90%)†
Relative oil flow rate: ±20%
Depth of investigation Borehole measurement
Mud type or weight limitations Min. salinity of all wellbore fluids:
2,000 ppm at 77 degF [25 degC]
1,000 ppm at 212 degF [100 degC]
700 ppm at 302 degF [150 degC]
Combinability Gamma ray, CPLT tool
Special applications H₂S service
† Valid for bubble size greater than 0.08 in [2 mm] and deviation less than 30°
Mechanical Specifications
FloView Tool
Temperature rating 302 degF [150 degC]
Pressure rating DEFT-A and DEFT-AB: 15,000 psi [103 MPa]
DEFT-B: 10,000 psi [69 MPa]
Borehole size—min. 2 in [5.08 cm]
Borehole size—max. 9 in [22.86 cm]
Outside diameter 1.6875 in [4.29 cm]
Length DEFT-A and DEFT-AB: 6.75 ft [2.06 m]
DEFT-B: 6.08 ft [1.85 m]
Weight 16 lbm [7 kg]
Tension 10,000 lbf [44,480 N]
Compression 1,000 lbf [4,450 N]
Measurement Specifications
MIST
Output Elemental spectra from individual tracer isotopes
Logging speed 1,800 ft/h [549 m/h]
Vertical resolution 6 in [15.24 cm]
Depth of investigation 6 in [15.24 cm]
Mud type or weight limitations None
Combinability Gamma ray, CCL, CPLT tool
Measurement Specifications
MIST-A MIST-B
Temperature rating 350 degF [177 degC] 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa]
Borehole size—min. 2¾ in [6.98 cm] 3 in [7.62 cm]
Borehole size—max. 12 in [30.48 cm] 12 in [30.48 cm]
Outside diameter 1.6875 in [4.29 cm] 2 in [5.08 cm]
Length 14.3 ft [4.36 m] 14.3 ft [4.36 m]
Weight 60 lbm [27 kg] 60 lbm [27 kg]
Tension 10,000 lbf [44,480 N] 10,000 lbf [44,480 N]
Compression 1,000 lbf [4,450 N] 1,000 lbf [4,450 N]
The explosives used for well perforating Temperature Rating of Explosive Systems
are designed mainly for different ranges Hollow Carrier Systems Only
of well temperatures. Cyclotrimethylene 700 371
trinitramine (RDX) explosives are used
for standard applications, whereas 600 315
hexanitrostilbene (HNS) explosives may
500 260
be used in environments up to 500 degF SX2
Applications
■ Deep penetrating perforations
■ Big hole perforating
■ Sand control
■ Perforating for fracturing
the data tabulated; contact your Schlumberger representative Blue type identifies API 19B Registered Perforation Systems; unofficial API data ‡ Available in 31⁄2-in perforating systems
for further information. Other shot densities and phasings are is listed for the other systems. § Available in 41⁄2-, 45⁄8-, 4.72-, and 5-in perforating systems
available; Schlumberger also custom designs perforation †† Available in 4.72-in perforating systems rated for high pressure
systems to meet specific needs.
the data tabulated; contact your Schlumberger representative HP = high pressure †† INsidr technology for gun shock control and low-debris applications
for further information. Other shot densities and phasings Blue type identifies API 19B Registered Perforation Systems; unofficial API data ‡‡ 97⁄8-in 62.8-lbm/ft Q125 heavy-wall casing
are available; Schlumberger also custom designs perforation is listed for the other systems. §§ 101⁄8-in 79.22-lbm/ft Q125 heavy-wall casing
systems to meet specific needs. † Available in 33⁄8-, 31⁄2-, and 3.67-in perforating systems
The majority of wireline-conveyed wide since 1988, this latest iteration S.A.F.E. slapper-actuated
perforating operations are performed provides a step change in performance
using standard detonators that employ reliability. The reliability of the Secure2
firing equipment
primary high explosives. This situation detonator is comparable with that of S.A.F.E. equipment’s detonating sys-
necessitates following rigorous safety a traditional resistor-based detona- tem is RF safe for electric potential
policies and procedures to ensure that tor, with an efficiency of 99.82%, while differences created by RF radiation,
stray electrical effects caused by radio maintaining the safety benefits of a impressed current for cathodic protec-
signals, electric arc welding operations, high-power initiator. The Secure2 deto- tion, and welding in appropriate loca-
or cathodic protection systems do not nator is radio frequency (RF) safe, with tions. The technology eliminates the
accidentally set off the detonator. In certification by an independent third- need to shut down radio communica-
environments where it is not feasible party assessor, which improves over- tion and other vital rig equipment dur-
to eliminate all sources of interference, all operational efficiency by allowing ing perforating jobs.
detonation systems that incorporate radio transmitters to stay on and critical The EFI detonating mechanism
additional safety features are required. wellsite operations, such as helicopters, used in S.A.F.E. equipment has proved
boats, cathodic protection, and welding resistant to stray voltages because it
in appropriate locations, to continue requires a high current for detonation.
Secure2 RF-safe during the perforating operation. The S.A.F.E. equipment contains no
electronic detonator No primary explosives are used within primary high explosives.
the Secure2 detonator, which reduces When shooting power is applied,
The Secure2* RF-safe electronic deto-
sensitivity to shock and burn detonation. a section of metal foil is instantly
nator uses exploding foil initiator (EFI)
Secure2 detonators are available vaporized, which causes a neighboring
technology to provide industry-leading
for hollow carrier and exposed gun sys- (secondary) high-explosives pellet to
safety and reliability during perforat-
tems, plug setting, and pipe recovery detonate and shear a small aluminum
ing operations.
applications. flyer. The flyer travels across a fluid
As the fourth generation of S.A.F.E.*
desensitization gap in the EFI housing
slapper-actuated firing equipment ini-
and strikes a booster that initiates the
tiators, which have been in use world-
detonation of the gun.
Mechanical Specifications
Secure2 High-Temperature Secure2 Exposed Secure2 Secure2 Detonator
Detonator Detonator Detonator Igniter
Temperature rating† 340 degF [171 degC] 400 degF [204 degC] 340 degF [171 degC] 340 degF [171 degC]
Pressure rating na na 15,000 psi [103 MPa] na
Fluid desensitization Yes Yes No na
Combinability Hollow carrier guns, puncher, Hollow carrier guns, puncher, Exposed guns, backoff, Plug setting
cutter, severing tools cutter, colliding tools string shot
Special applications UN classification code: 1.4S UN classification code: 1.4S UN classification code: 1.4B UN classification code: 1.4S
na = not applicable
† For 1 h
Mechanical Specifications
ASFS System
Temperature rating 340 degF [171 degC]
Addressable switch
Plug-and-shoot
addressable switch
Measurement Specifications
CCL
Output Casing and tubing collar location
Mud type or weight limitations None
Combinability Requires monocable, coaxial cable, or hepta-cable
Combinable with perforating guns of different sizes,
plug and packer setting tools, cutters, punchers,
cased hole logging tools
Special applications H₂S service
Mechanical Specifications
CCL
Temperature rating 500 degF [260 degC]
Pressure rating 25,000 psi [172 MPa]
Borehole size—min. 1½ in [3.81 cm]
Borehole size—max. No limit
Outside diameter 1.375 to 3.375 in [3.49 to 8.57 cm]
CCL-AG
Length 1.48 to 3.5 ft [0.45 to 1.07 m]
Weight 6 to 81.5 lbm [2.7 kg to 37 kg]
Measurement Specifications
UPCT Tool
Output Formation gamma ray, casing and tubing collar location
Mud type or weight limitations None
Combinability Combinable with all detonator types and perforating
guns without requiring a shock absorber sub
Special applications H₂S service
Shock qualified to 5,000-g pyro
Mechanical Specifications
UPCT Tool
Temperature rating 350 degF [177 degC]
1-h excursion: 374 degF [190 degC]
With flask: 500 degF [260 degC]
CCL Pressure rating 20,000 psi [138 MPa]
With flask: 30,000 psi [207 MPa]
Borehole size—min. 1.6875-in tool: 1.82 in [4.62 cm]
Flasked 2.125-in tool: 2.25 in [5.72 cm]
Borehole size—max. No limit
Outside diameter 1.6875 in [4.29 cm]
With flask: 2.125 in [5.40 cm]
Length Without gun: 4.5 ft [1.37 m]
With flask: 5.94 ft [1.81 m]
Weight 46 lbm [20.9 kg]
UPCT
rays in the formations near the plugs, and packers in wells without
wellbore. This nuclear measurement previously recorded cased hole logs
indicates the radioactive content ■ Correlation of perforating guns,
of the formations. Effective in any plugs, and packers in wells with
environment, the PGGT tool is the uniform casing joints
standard device for the correlation of ■ Correlation of plugs and packers
cased hole logs with openhole logs. in large casing sizes, which may
Perforating guns, tubing punchers, cause the CCL to be centralized
plugs and packers, and core guns can and ineffective
be correlated by using gamma ray, CCL,
■ Added assurance for correlating
or both techniques simultaneously.
critical perforating or plug and
packer jobs
■ Reliable openhole gamma ray
Measurement Specifications
PGGT Tool
Output Naturally occurring gamma ray, casing collar locator
Logging speed 1,800 ft/h [549 m/h]
Range of measurement 0 to 400 gAPI
Vertical resolution 12 in [30.48 cm]
Accuracy ±5%
Depth of investigation 24 in [60.96 cm]
Mud type or weight limitations None
Combinability CST chronological sample taker, casing guns,
plugs, packers
Special applications H₂S service
Mechanical Specifications
PGGT-DA PGGT-DC
Temperature rating 350 degF [177 degC] 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa]
Borehole size—min. 4⅜ in [11.11 cm] 4⅛ in [10.47 cm]
Borehole size—max. No limit No limit
Outside diameter 3.625 in [9.21 cm] 3.375 in [8.57 cm]
Length 5.83 ft [1.78 m] 5.83 ft [1.78 m]
Weight 97 lbm [44 kg] 97 lbm [44 kg]
Mechanical Specifications
WPP Platform
Temperature rating 302 degF [150 degC]
Pressure rating 15,000 psi [103 MPa]
Borehole size—min. 1.75 in [4.44 cm]
Borehole size—max. No limit
Outside diameter 1.6875 in [4.29 cm]
With gyroscope carrier: 1.75 in [4.44 cm]
Length Oriented perforating: 24.0 ft [7.31 m] (not including gun and gamma ray tool)
Completion mapper: 22.0 ft [6.70 m] (not including gamma ray tool)
Pressure and temperature measurement: 15.0 ft [4.57 m]
(not including gun and gamma ray tool)
Weight WPP platform: 166.3 lbm [75.4 kg]
Oriented perforating: 159.3 lbm [72.2 kg]
Completion mapper: 140.3 lbm [63.6 kg]
Pressure and temperature measurement: 85 lbm [38 kg]
Tension Perforating and imaging: 14,200 lbf [63,160 N]
Measurement: 39,000 lbf [173,480 N]
Measurement Specifications
WOPT
Output Azimuthal perforating direction
Logging speed Stationary
Range of measurement Indexing at 5° increments
Accuracy ±3°
Depth of investigation Borehole positioning device
Mud type or weight limitations None
Combinability 3⅛-, 3⅜-, 3½-, 3.67-, 4-, 4½-, 4.72-, and 5-in
[7.93-, 8.57-, 8.89-, 9.32-, 10.16-, 11.43-, 11.99-,
and 12.70-cm] HSD high shot density perforating
gun systems
Mechanical Specifications
WOPT
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 4 in [10.16 cm]
Borehole size—max. No limit
Outside diameter 3.375 in [8.57 cm]
Length Variable based on configuration
Weight Variable based on configuration
Applications
■ Increased well productivity
■ Maximum casing hole size
■ Maximum formation penetration
Mechanical Specifications
MPD SPD
Temperature rating 500 degF [260 degC] 500 degF [260 degC]
Pressure rating 25,000 psi [172 MPa] 25,000 psi [172 MPa]
Borehole size—min. 113⁄16 in [4.60 cm] 113⁄16 in [4.60 cm]
Borehole size—max. No limit 7 in [17.78 cm]
Outside diameter 1.375 to 2 in [3.49 to 5.08 cm] 1.6875 to 2.875 in [4.29 to 7.30 cm]
Length 1.46 to 1.77 ft [0.44 to 0.54 m] 2.36 to 3.3 ft [0.72 to 1.00 m]
Weight 7 to 22 lbm [3 to 10 kg] 10 to 32 lbm [4.5 to 14 kg]
SPD-A
Mechanical Specifications
WPAT-A WPAT-B
Temperature rating 400 degF [204 degC] 400 degF [204 degC]
Pressure rating 10,000 psi [69 MPa] 10,000 psi [69 MPa]
Casing size—max. ID 2.58 in [6.55 cm] 3.04 in [7.72 cm]
Casing size—OD 2⅞ in [7.30 cm] 3.5 in [8.89 cm]
Outside diameter 2.125 in [5.39 cm] 2.6 in [6.60 cm]
Length 9.2 ft [2.80 m] 9.3 ft [2.83 m]
Weight 86 lbm [239 kg] 96 lbm [43 kg]
Cutters and colliding tools are designed ■ Burr- and flare-free cutting with
to sever downhole tubulars and chemical cutters
completion components in a variety of ■ Colliding tool for heavy drillpipe
environments. or drilling collars
The two types of cutting technolo-
gies are as follows:
■ Explosive jet cutters make precise PowerCutter precision
cuts with minimal swelling by using tubular cutter
a radial shaped charge that creates
The PowerCutter* precision tubular
a 360° high-pressure jet.
cutter employs a unique liner material
■ Chemical cutters use heat and abra-
and design to deliver industry-leading
sion generated by a chemical reac- cut quality, comparable to that of a
tion to cleanly cut tubulars. chemical cutter but without the need
Both technologies cleanly and for hazardous chemicals. Operation
efficiently cut coiled tubing, tubing, is simple, reliable, and efficient with
casing, drillpipe, and completion no anchoring required. No anchoring
components, which enables conducting reduces the likelihood of the tool
single-trip dressing and fishing becoming stuck after the cutting
operations. operation is performed.
Colliding tools use a high explosive The PowerCutter precision tubular PowerCutter
load to create a radial jet by colliding cutter is combinable with the RF-safe
two opposing ballistic shock waves. Secure2 electronic detonator for
They are specifically designed for additional operational safety and
severing heavyweight drill pipe and efficiency.
drill collars.
Cutters and colliding tools are avail- Applications
able for the entire range of downhole
tubulars. For more information, con-
■ Coiled tubing, tubing, casing, drill-
tact your Schlumberger representative. pipe, and completion components
■ Completions under compression
or tension
Applications ■ High-pressure, high-temperature
■ Coiled tubing, tubing, casing, drill- wells
pipe, and completion components
Measurement Specifications
PowerCutter Precision Tubular Cutter†
Outside diameter 1.68 in [4.29 cm] 2.125 in [5.40 cm] 2.5 in [6.35 cm] 2.75 in [6.99 cm] 3.65 in [9.27 cm] 4.15 in [10.54 cm]
Temperature rating 400 degF [204 degC] 400 degF [204 degC] 400 degF [204 degC] 400 degF [204 degC] 400 degF [204 degC] 400 degF [204 degC]
Pressure rating 18,000 psi [124 MPa] 18,000 psi [124 MPa] 18,000 psi [124 MPa] 18,000 psi [124 MPa] 18,000 psi [124 MPa] 18,000 psi [124 MPa]
Tubing size 2⅜ in 2⅞ in 3½ in 3½ in 4½ in 5½ in
Tubing weight with couplings‡ 4.0 to 4.7 lbm/ft 6.4 to 7.90 lbm/ft 9.2 to 10.3 lbm/ft 9.2 to 10.3 lbm/ft 11.6 to 12.6 lbm/ft 17.0 to 26.0 lbm/ft
Tubing swell with burr 2.82 in [7.16 cm] 3.41 in [8.66 cm] 3.90 in [9.91 cm] 3.99 in [10.13 cm] 4.94 in [12.55 cm] 5.87 in [14.91 cm]
Outside diameter before cutting 1.724 in [4.380 cm] 2.139 in [5.433 cm] 2.505 in [6.363 cm] 2.753 in [6.993 cm] 3.655 in [9.284 cm] 4.155 in [10.554 cm]
Outside diameter after cutting 1.693 in [4.300 cm] 2.068 in [5.253 cm] 2.405 in [6.109 cm] 2.657 in [6.749 cm] 3.605 in [9.157 cm] 3.810 in [9.677 cm]
Explosive type, max. weight HMX, 11.2 g HMX, 17.0 g HMX, 28.33 g HMX, 38.0 g HMX, 38.0 g HMX, 109.3 and 76 g
† Numerous other sizes are available on request
‡ Grade L80
Mechanical Specifications
1.56-in HSD High Shot Density Perforating Gun System Puncher
Puncher Charge 1606S Puncher 1606M Puncher 1606L Puncher 1606XL Puncher 1606XXL Puncher
Temperature rating for 1 h 500 degF [260 degC] 500 degF [260 degC] 500 degF [260 degC] 400 degF [204 degC] 400 degF [204 degC]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa]
Tubing size—min. 21⁄16 in 21⁄16 in 21⁄16 in 21⁄16 in 21⁄16 in
Tubing size—max. No limit No limit No limit No limit No limit
Outside diameter 1.56 in [3.96 cm] 1.56 in [3.96 cm] 1.56 in [3.96 cm] 1.56 in [3.96 cm] 1.56 in [3.96 cm]
Explosive type HNS HNS HNS HMX HMX
Wall thickness 0.19–0.375 in 0.375–0.50 in 0.500–0.58 in 0.75 in 1.0 in
[4.83–9.53 mm] [9.53–12.7 mm] [12.70–14.73 mm] [19.50 mm] [25.4 mm]
Avg. hole size 0.30–0.21 in 0.25–0.21 in 0.17–0.13 in 0.19 in 0.18 in
[7.62–5.33 mm] [6.35–5.33 mm] [4.32–3.30 mm] [4.83 mm] [4.57 mm]
Penetration depth In the outer pipe for all configurations: <0.10 in [<2.54 mm]
Shifting Tool
Anchor module Linear actuator module UST
or multiple components in multizone seamlessly integrated to automatically – Opening and closing of isolation
completions. The UST is paired with drive the ReSOLVE system forward valves
the anchor and linear actuator, for and resist rotation while the milling
tool’s rotating bit engages the obstruc- – Shifting sliding sleeves
which forces and displacements are
measured to confirm that the expected tion. Unlike for conventional uninstru- – Pulling retrievable plugs
force and distance were achieved. mented milling tools, the engineer – Fishing operations
To engage a selected completion is fully informed of the tool’s perfor- – Replacing gas lift valves
component, the UST radially extends mance status through real-time moni-
toring while dynamically controlling – Safety valve lockout
profile keys with a specified preload
the bit speed and weight on bit (WOB). ■ Selective shifting with a high-
force. The extended keys remain com-
pliant to navigate well geometry. Once The MillOptimizer* automatic milling expansion universal shifting tool
the UST is latched into the profile of system automatically adjusts the WOB to – Sliding sleeves in multizone
the component, the anchor secures the achieve a particular torque. Bit torque is completions
tool in the well, and the linear actuator constantly monitored and WOB adjusted – Mechanically opening isolation
extends or retracts to shift the compo- by the TuffTRAC tractor to maintain a valves
nent. The keys fully retract to enable the constant bit speed. With MillOptimizer
system’s coordinated control, the trac- – Single-run multiple shifting
tool to pass restrictions.
tor and milling tool operate as a single – Shifting components below
intelligent system to maximize milling restrictions
Nonexplosive setting tool efficiency and prevent stalling. Any bit ■ Milling
The setting tool is hydraulically powered, stalling is immediately detected by the – Removing scale accumulation
providing a large force of up to 78,000 lbf MillOptimizer system, which automati- in well tubulars
[347,000 N] for setting plugs and pack- cally stops the tool, disengages the scale
by reversing the bit and the tractor, and – Milling plugs
ers. With real-time confirmation report-
ing of the setting force applied and a then resumes milling. – Removing tubing restrictions
variable setting speed, the ReSOLVE ser- The milling tool uses a novel PDC
vice’s setting tool is a reliable, low-risk bit designed and manufactured by Lyng
alternative to the conventional use of Drilling, a Schlumberger company.
explosives to set plugs and packers. Not Optimized for maximum rate of pen-
using explosives provides a significant etration (ROP) when milling hard scale
advantage for operations in locations buildup, this groundbreaking mill bit
where explosives security and safety con- achieves the highest rate of scale vol-
cerns can complicate logistics and cause ume milled within the power limits of
delays. In addition, the setting tool can electric wireline.
be performance tested at the surface
before deployment, and radio silence is
not necessary during operations.
Mechanical Specifications
Shifting Setting Milling UST
Temperature rating 302 degF [150 degC] 302 degF [150 degC] 302 degF [150 degC] 302 degF [150 degC]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa]
High-pressure version: High-pressure version: High-pressure version:
30,000 psi [207 MPa] 30,000 psi [207 MPa] 30,000 psi [207 MPa]
Performance limits Anchoring range: Setting range: Max. milling torque: Key opening range:
3.13–5.10 in [7.95–12.95 cm] 11.4 in [28.96 cm] 250 ft.lbf [339 N.m] 3.13–5.10 in
Anchoring range, large-pipe version: Setting force: Max. bit speed: 130 rpm [7.95–12.95 cm]
4.63–6.60 in [11.76–16.74 cm] 78,000 lbf [346,960 N] Key radial force:
Linear range: 20 in [50.8 cm] 700 lbf [133,450 N]
Linear force: 45,000 lbf [200,170 N]
Borehole size—min. 3.2 in [8.13 cm] 4 in [10.16 cm] 3.2 in [8.13 cm]† 3.2 in [8.13 cm]
Borehole size—max. 6.7 in [17.02 cm] –‡ –‡ –‡
Outside diameter 3.125 in [7.94 cm] 3.625 in [9.21 cm] 3.125 in [7.94 cm] 3.125 in [7.94 cm]
High-pressure version:
3.625 in [9.21 cm]
Large-pipe version:
4.624 in [11.75 cm]
Length 25.0 ft [7.62 m]§ 18.9 ft [5.76 m]§ 8.7 ft [2.65 m]§ 5.5 ft [1.79 m]§
Weight 489 lbm [223 kg] 423 lbm [192 kg] 441 lbm [200 kg]†† 141 lbm [64 kg]
Tension 60,000 lbf [266,890 N] 60,000 lbf [266,890 N] 60,000 lbf [266,890 N] 60,000 lbf [266,890 N]
Compression 20,000 lbf [88,960 N] 20,000 lbf [88,960 N] 20,000 lbf [88,960 N] 20,000 lbf [88,960 N]
† Based on current minimum bit size
‡ Configuration dependent
§ Complete toolstring, without a tractor or logging head
†† Minimum with two drives
Mechanical Specifications
CPST-AA CPST-CC CPST-BC
Temperature rating 400 degF [204 degC] 450 degF [232 degC] 400 degF [204 degC]
Pressure rating 15,000 psi [103 MPa] 15,000 psi [103 MPa] 15,000 psi [103 MPa]
Casing size—min. 5 in [12.70 cm] 4½ in [11.43 cm] 3½ in [8.89 cm]
Casing size—max. 13⅜ in [33.97 cm] 5½ in [13.97 cm] 5 in [12.70 cm]
Outside diameter 3.625 in [9.21 cm] 2.75 in [6.99 cm] 2.125 in [5.40 cm]
Length 7.5 ft [2.29 m] 7.35 ft [2.24 m] 11.25 ft [3.43 m]
Weight 180 lbm [82 kg] 79.5 lbm [36 kg] 81.8 lbm [37 kg]
Bottom thread Sleeve: 3½-in Sleeve: 2½-in Sleeve: 2-in [5.08-cm]
[8.89-cm] 6 Acme [6.35-cm] 6 Acme 10 Stub Acme
Mandrel: 2-in Mandrel: 1-in Mandrel: 11⁄16-in
[5.08-cm] 6 Acme [2.54-cm] 8 UN [4.29-cm] 16 UN
The junk basket consists of a wireline The gauge ring is screwed on to Applications
feeler and junk catcher. It is run with the mouth of the basket. This position ■ Clear casing and tubing of debris
a gauge ring to determine if the casing helps to seal the housing bottom as
ID is sufficient to permit subsequent the tool is pulled out of the wellbore.
■ Prevent bridge plug or packer
passage of the completion string, The ring size used depends on the sticking
plugs, packers, or other tools. The junk casing size and whether a bridge plug ■ Drift the casing ID to ensure the
basket also cleans the well of junk. or packer is run. However, the gauge passage of tools and completion
The housing of the junk basket is ring OD is always chosen to be slightly equipment
fluted to allow wellbore fluid to enter the larger than subsequent tool runs to
bottom of the housing and exit through ensure that the tools will pass through
its side as the tool is run. the casing.
Mechanical Specifications
Gauge Ring and Junk Basket
Temperature rating 500 degF [260 degC]
Pressure rating 25,000 psi [172 MPa]
Casing size—min. 4½ in [11.43 cm]
Casing size—max. 13⅜ in [33.97 cm]
Outside diameter 3 to 4 in [7.62 to 10.16 cm]†
Length 5.83 ft [1.78 m]
Weight Variable
† The OD of the junk basket depends on gauge ring used.
Caliper devices are integral to most stan- short axis but less than the long axis. Applications
dard logging tools because measurement The four-arm caliper measures both ■ Borehole diameter
of the borehole axis is an extremely the short and long axes of the hole
■ Borehole shape
useful parameter for environmental cor- and provides a more accurate value of
rection, quantitative interpretation, and borehole volume. Single-arm calipers ■ Borehole volume
cement volume calculation. are typically part of most density ■ Environmental correction
Caliper logs are recorded from and microresistivity tools; four-arm to log output
one-, three-, four-, or six-arm devices. calipers are part of most dipmeter
If the borehole is uniform and circular, tools. The Mechanical Caliper Device
all the calipers read the same value. (MCD) is a three-arm caliper tool. The
In an elliptical hole, the single-arm six-arm Environmental Measurement
caliper generally lines up with the Sonde (EMS) caliper is described
long axis, and the three-arm caliper subsequently in this chapter.
indicates a diameter greater than the
Measurement Specifications
One-Arm Caliper MCD Three-Arm Caliper Four-Arm Caliper
Output Borehole size Borehole size Borehole size
Logging speed Depends on toolstring Depends on toolstring Depends on toolstring
Range of measurement 4 to 22 in [10.16 to 55.88 cm] 4½ to 16 in [11.43 to 40.64 cm] 4 to 22 in [10.16 to 55.88 cm]
Vertical resolution 6 in [15.24 cm] 6 in [15.24 cm] 6 in [15.24 cm]
Accuracy ±0.25 in [±0.64 cm] ±0.25 in [±0.64 cm] ±0.20 in [±0.51 cm]
Depth of investigation Borehole Borehole Borehole
Mud type or weight limitations None None None
Combinability Combinable with most tools Combinable with most tools Combinable with most tools
Special applications H₂S service H₂S service H₂S service
Mechanical Specifications
One-Arm Caliper MCD Three-Arm Caliper Four-Arm Caliper
Temperature rating† 350 degF [177 degC] 350 degF [177 degC] 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa] 20,000 psi [138 MPa] 20,000 psi [138 MPa]
Borehole size—min. 4 in [10.16 cm] 4 in [10.16 cm] 4 in [10.16 cm]
Borehole size—max.‡ 22 in [55.88 cm] 16 in [40.64 cm] 22 in [55.88 cm]
Outside diameter Depends on toolstring 3.375 in [8.57 cm] Depends on toolstring
Length Depends on toolstring 8 ft [2.44 m] Depends on toolstring
Weight Depends on toolstring 155 lbm [70 kg] Depends on toolstring
Tension Depends on toolstring 36,000 lbf [160,140 N] Depends on toolstring
Compression Depends on toolstring 9,900 lbf [44,040 N] Depends on toolstring
† Calipers rated to 500 degF [260 degC] are available for high-temperature toolstrings.
Caliper
‡ extensions are available for larger borehole sizes.
or toolstring
■ Two ACTS tools in a toolstring
Measurement Specifications
ACTS
Output Tension and compression forces
Logging speed No limit
Range of measurement 22,000 lbf [97,860 N]
Accuracy ±3%
Mud type or weight limitations None
Combinability Combinable with most tools
Special applications H₂S service
Mechanical Specifications
ACTS
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 4 in [10.16 cm]
Borehole size—max. No limit
Outside diameter 3.375 in [8.57 cm]
Length 4 ft [1.22 m]
Weight 51 lbm [23 kg]
Tension 22,000 lbf [97,860 N]
Compression 22,500 lbf [100,080 N]
Mechanical Specifications
EMS
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 6 in [15.24 cm]
Borehole size—max. 30 in [76.2 cm]
Outside diameter 3.375 in [8.57 cm]
Length 14.23 ft [4.34 m]
Weight 297 lbm [135 kg]
Tension 50,000 lbf [224,110 N]
Compression 11,000 lbf [48,930 N]
Measurement Specifications
FPIT Tool
Output Free pipe stretch and torque
Logging speed Stationary
Range of measurement Stretch: 0.12 to 3.6 in/1,000 ft [10 to 300 USTR]
Torque: 0.02 to 0.5 rev/1,000 ft [0.02 to 0.5 c/305 m]
Vertical resolution 7.24 ft [2.21 m] (distance between anchors)
Accuracy ±10% at 350 degF [177 degC]
Depth of investigation Not applicable
Mud type or weight limitations None
Combinability Backoff shot, casing collar locator
Special applications
Mechanical Specifications
FPIT Tool
Temperature rating FPIT-A and FPIT-D: 350 degF [177 degC]
FPIT-C: 330 degC [165 degC]
Pressure rating 25,000 psi [172 MPa]
Borehole size—min.† 1½ in [3.81 cm]
Borehole size—max.† 5 in [12.70 cm]
Outside diameter† 1.375 in [3.49 cm]
Length 13.92 ft [4.24 m]
Weight 40.75 lbm [18 kg]
† For operation in casing sizes up to 95⁄8 in [24.45 cm], the tool OD is increased to 1.875 in [4.76 cm],
for which the minimum hole size is 2 in [5.08 cm].
Measurement Specifications
CERT Tool
Output Surface indications of retrieval
Logging speed 4,000 ft/h [1,219 m/h]
Range of measurement Lifting capacity up to 1,000 lbf [4,450 N]
(depends on area of contact with the fish)
Depth of investigation Borehole service only
Mud type or weight limitations None
Combinability Combinable with gamma ray and CCL tools
Special applications H₂S service
Mechanical Specifications
CERT Tool
Temperature rating 350 degF [177 degC]
Pressure rating 20,000 psi [138 MPa]
Borehole size—min. 2 in [5.08 cm]
Borehole size—max. No limit
Outside diameter† 111⁄16, 2⅛, 2¾, and 3⅜ in [4.29, 5.40, 6.99,
and 8.57 cm]
Length 2.5 ft [0.76 m]
Weight 50 lbm [22.7 kg]
† Ultimate tool size depends on the appropriate gauge rings for the hole size.