Professional Documents
Culture Documents
Cleaning of Outlet Bill Sensor On Main Module - Level - 2 PDF
Cleaning of Outlet Bill Sensor On Main Module - Level - 2 PDF
Draft
Actions:
1. Always use gloves when touching and handling the optical light-guides and prisms
2. Always use proper ESD safety equipment when touching the electronic boards and components
3. In some cases the operation required to extract the light-pipes and prisms is complex and involves
handling of fragile parts. This will be specifically pointed out inside the bulletin.
In all these cases, if the dirt conditions are not extreme, if not fully confident in own handling
abilities and if proper spare parts are not available, it is recommended to clean the light-guides
without removing them from the housing and following the simpler cleaning procedures (see the
MEI-Bulletin-BNR-SRV-002), as handling these parts could result in damaging or breaking them.
Warning :
Please ensure power and USB are removed from the BNR/BNA6 prior to perform
any cleaning procedure !!!
Cleaning Level 2
Reassembly of unit
Assembly of Bezel:
Place the bezel carefully without forcing and fix with
2 screws