Hex Inverter: BU4069UB / BU4069UBF / BU4069UBFV

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Standard ICs

Hex inverter
BU4069UB / BU4069UBF / BU4069UBFV

The BU4069UB, BU4069UBF and BU4069UBFV are six-circuit inverters with no buffers. A single-stage gate configu-
ration reduces the propagation time.

•1)Features
Low power dissipation. 4) High fan-out.
2) Wide range of operating power supply voltages. 5) Direct drive of 2 L-TTL inputs and 1 LS-TTL input.
3) High input impedance.

•Logic circuit diagram •Block diagram


I1 1 14 VDD

VDD
O1 2 13 I6

I2 3 12 O6

IN O2 4 11 I5
OUT

I3 5 10 O5

O3 6 9 I4
VSS

VSS 7 8 O4

•Absolute maximum ratings (V SS = 0V, Ta = 25°C)


Parameter Symbol Limits Unit
Power supply voltage VDD – 0.3 ~ + 18 V
Power dissipation Pd 1000 (DIP), 450 (SOP), 350 (SSOP-B14) mW
Operating temperature Topr – 40 ~ + 85 °C
Storage temperature Tstg – 55 ~ + 150 °C
Input voltage VIN – 0.3 ~ VDD + 0.3 V

1
This datasheet has been downloaded from http://www.digchip.com at this page
Standard ICs BU4069UB / BU4069UBF / BU4069UBFV

•DCElectrical characteristics
characteristics (unless otherwise noted, V SS = 0V, Ta = 25°C)

Measurement
Parameter Symbol Min. Typ. Max. Unit Conditions circuit
VDD (V)
4.0 — — 5
Input high level voltage VIH 8.0 — — V 10 — Fig.1
12.5 — — 15
— — 1.0 5
Input low level voltage VIL — — 2.0 V 10 — Fig.1
— — 2.5 15
Input high level current IIH — — 0.3 µA 15 VIH = 15V Fig.1
Input low level current IIL — — – 0.3 µA 15 VIL = 0V Fig.1
4.95 — — 5
Output high level voltage VOH 9.95 — — V 10 IO = 0mA Fig.1
14.95 — — 15
— — 0.05 5
Output low level voltage VOL — — 0.05 V 10 IO = 0mA Fig.1
— — 0.05 15
– 0.16 — — 5 VOH = 4.6V
Output high level current IOH – 0.4 — — mA 10 VOH = 9.5V Fig.1
– 1.2 — — 15 VOH = 13.5V
0.44 — — 5 VOL = 0.4V
Output low level current IOL 1.1 — — mA 10 VOL = 0.5V Fig.1
3.0 — — 15 VOL = 1.5V
— — 1 5
Static current dissipation IDD — — 2 µA 10 VI = VDD or GND —
— — 4 15

2
Standard ICs BU4069UB / BU4069UBF / BU4069UBFV

Switching characteristics (unless otherwise noted, Ta = 25°C, VSS = 0V, CL = 50pF)

Measurement
Parameter Symbol Min. Typ. Max. Unit Conditions
VDD (V) circuit

— 180 — 5
Output rise time tTLH — 90 — ns 10 — Fig.2
— 65 — 15
— 100 — 5
Output fall time tTHL — 50 — ns 10 — Fig.2
— 40 — 15
— 90 — 5
“L” to “H”
tPLH — 50 — ns 10 — Fig.2
Propagation delay time
— 40 — 15
— 65 — 5
“H” to “L”
tPHL — 40 — ns 10 — Fig.2
Propagation delay time
— 30 — 15
Input capacitance CIN — 5 — pF — — —

•Measurement circuits
VDD 20ns 20ns
VDD

VDD

Input

A VSS
P.G. CL
V tPHL tPLH
VOH
GND
GND
Output
VOL

tTHL tTLH

Fig. 1 DC characteristics Fig. 2 Switching characteristics

3
Standard ICs BU4069UB / BU4069UBF / BU4069UBFV

•Electrical characteristic curve


1200

DIP14
POWER DISSIPATION: Pd (mW)

1000

800

600

SOP14
400

SSOP-B14
200

0
0 25 50 75 100 125 150

AMBIENT TEMPERATURE: Ta (°C)

Fig. 3 Power dissipation vs. Ta

•External dimensions (Units: mm)


BU4069UB BU4069UBF

19.4 ± 0.3 8.7 ± 0.2


14 8
6.5 ± 0.3

14 8
6.2 ± 0.3

4.4 ± 0.2

1 7

0.15 ± 0.1
0.51Min.
4.25 ± 0.3

7.62
1 7
1.5 ± 0.1

0.11

0.3 ± 0.1
1.27 0.4 ± 0.1 0.3Min.
3.2 ± 0.2

2.54 0.5 ± 0.1 0° ~ 15°


0.15

DIP14 SOP14

BU4069UBFV
5.0 ± 0.2
14 8
6.4 ± 0.3
4.4 ± 0.2

0.15 ± 0.1

1 7
1.15 ± 0.1
0.1

0.65 0.22 ± 0.1 0.3Min.

0.1

SSOP-B14

You might also like