Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

H-800 / 900

“GO / NO” CURRENT STATUS SWITCHES


SPECIFICATIONS New Release Form 450.30-S18 (101)

ON/OFF STATUS FOR DIRECT-DRIVE FANS, H-800


PUMPS, AND PROCESS MOTORS MINI

• More reliable for status than relays across auxil-


iary contacts H-900
SPLIT-
• Ideal for direct-drive units, unit vents, fan coil units, CORE 00475VIP
exhaust fans and other fixed loads
• Great for lighting status—less expensive than 277V UNIT
MOTOR VENT HEATER
relays CONTROL
• Low 0.5 A turn-on — ideal for small exhaust fans. AUTOMATION CENTER
CONTROL
(Not intended to detect belts breaking) PANEL SENSOR

SENSOR IN
MONITOR FANS, PUMPS, MOTORS & ELECTRICAL
SENSOR IN
LOADS FOR PROPER OPERATION
LD06515
(SENSOR STATUS
• Split-core 900 for fast retrofit installation OPTIONAL) HAWKEYE 800 / 900
• Mini solid-core 800 fits in tight enclosure "GO / NO" CURRENT STATUS SWITCHES

• 100% solid-state, no moving parts to fail Go/no Current Status Switches are cost-effective for unit vents,
fan coils, exhaust fans and other fixed loads where belt loss is
• Made in U.S.A.; 5 year limited warranty not a concern.

• Non-polarity sensitive output FIG. 1 – H-800 / 900 “GO / NO” CURRENT STATUS
SWITCHES

ORDERING INFORMATION

MODEL AMPERAGE RANGE OUTPUT TYPE OUTPUT RATING U.L. cU.L.


H-800 0.5 - 200 A N.O., Solid State 0.1 @ 30 VAC/DC • •
H-800-L 0.5 - 200 A N.O., Solid State 0.5 @ 30 VAC/DC
H-900 1.5 - 200 A N.O., Solid State 0.1 @ 30 VAC/DC Applied Applied
H-900-L 1.5 - 200 A N.O., Solid State 0.5 @ 30 VAC/DC
Load switching (high voltage triac) versions are available for interlocking. Consult Factory

OPTIONAL ORDERING INFORMATION

MODEL DESCRIPTION
800/BRKT H800 MOUNTING BRACKET
SPECIFICATIONS

Product H-800 / 900 “Go / No” Current Status Switches


Sensor Power Induced
Isolation 600VAC rms
Temperature Range -15 to 60°C
Humidity Range 0 - 95% non-condensing
Dimensions (900) (L x W x H) 3.00" x 2.75" x 1.025"
Sensor Hole Size (900) 1.00" x 0.75"
Dimensions (800) (L x W x H) 2.29" x 1.85" x .875"
Sensor Hole Size (800) 0.70" diameter
Switch Turn-on Threshold 0.5 A (typical)
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local York International office. York International Corp. shall not be liable for damages resulting from misapplica-
tion or misuse of its products.

P.O. Box 1592, York, Pennsylvania USA 17405-1592 Tele. 800-861-1001 Subject to change without notice. Printed in USA
Copyright © by York International Corporation 2001 www.york.com ALL RIGHTS RESERVED
Form 450.30-S18 (101)
New Release

You might also like