Professional Documents
Culture Documents
JWEB User Documentation
JWEB User Documentation
Connect the management device to the services gateway using either of the following
methods: Connect an RJ-45 cable (Ethernet cable) from any one port between ge-0/0/1 and
ge-0/0/15 on the front panel to the Ethernet port on the management device (workstation or
laptop). After connecting the management device to the services gateway, the DHCP server
process on the services gateway will assign an IP address automatically to the management
device. Ensure that the management device acquires an IP address on the 192.168.1/24
subnet-work (other than 192.168.1.1) from the device. The services gateway functions as a
DHCP server and will assign an IP address to the management device. By default, the DHCP
server is enabled on the L3 VLAN interface, (IRB) vlan.0 (ge-0/0/1 to ge-0/0/15), which is
configured with an IP address of 192.168.1.1/24. When an SRX device services Gateway is
powered on for the first time, it boots using the factory default configuration.
Setup wizards
[Type text]
4. Click Log In. The J-Web Initial Setup page is displayed
5. Click on start>
[Type text]
6. Configure the basic settings such as Host Name, Domain Name, Root Password and
verify Root password
: Ensure that you have configured the IP address and root password before you apply the configuration.
7. Click Next
8. Enter the default gateway, DNS servers and domain search
Note: optional field
9. Click Next
10.This page enables you to create new VLANs
Note: optional page
[Type text]
11.Edit an existing VLAN by double-clicking the name or by selecting the row and clicking
Edit
12.Moved the ge-0/0/4.0 to available interface and user can able to configure IPV4
address
13.Enter the Vlan-id, (range :2-4094)
14.Select one or more interfaces in the available Interfaces box, then click the "<<"
button to add to group. You may also remove interfaces by selecting an interface in
the right box and clicking the "<<" button.
15.Click Next
[Type text]
16.This page shows gigabit Ethernet, Fast Ethernet and Vlan interfaces
Note: Optional page
17.To edit an interface, double-click it, or select the row and click Edit. To add an
interface, click Add.
[Type text]
22.Click Save
23.Configured interface will appear in configure interface main page
24.Click Next
25.This page enables you to select the way that J-Web behaves when you start it.
26.Select the option in J-web starting page option
27.Select the option in J-web commit options
28.Click Next
[Type text]
29.This page to set the system time and time zone
(Note: Optional page)
30.Click Next
31.This page shows the system configuration summary
[Type text]
4. Select reboot options if required and click on Upload and “install package button “
5. Browser will refresh every 1min to provide updated status and the 1st update will be
available once image is copied to router
[Type text]
FTP upload
1. Navigate to Maintain > Software> Install package page for FTP upload
2. Provide FTP server and credential information and click on Fetch and install package
button
[Type text]
3. UI indicates step by step install progress
[Type text]
4. Click OK to reboot immediately (if reboot is selected ) or schedule a reboot using
hyperlink
2. Click on Downgrade button and select the hyper link to schedule a reboot
[Type text]
Note: during reboot connection to the router will be lost hence there won’t be any
update in the page status.
[Type text]
User Scenario 3: J-WEB FW and NAT wizard:
FW wizards
34.click on Add>
35.Enter the policy name
36.Select the available zone_address for source and destination address and move to
selected zone/address using Up arrow mark
37.Select the available applications and move to selected application using Up arrow
mark.
38.Select the Action as permit/deny
(Note: All the given fields are mandatory)
[Type text]
39.Click save, and it will reflect in firewall policy table
[Type text]
VPN Wizard
1. Navigate to configure > Wizards > VPN_wizards (after initial setup)
2. Click on start >
[Type text]
12.Add remote Gateway Public IP
13.Add IP addresses for the remote private networks and clicking Add.
[Type text]
20.Select the optional field
[Type text]
[Type text]
NAT Wizard
1. Navigate to configure > Wizards > NAT_wizards (after initial setup)
2. Click on start >
[Type text]
[Type text]