Professional Documents
Culture Documents
Sri Ramakrishna Institute of Technology, Coimbatore-10: Mechatronics QUIZ-2
Sri Ramakrishna Institute of Technology, Coimbatore-10: Mechatronics QUIZ-2
MECHATRONICS
QUIZ-2
1. Which is the first aspect which needs to be considered in the Mechatronics design process?
a) Hardware integration and simulation
b) Conceptual design
c) Mathematical modeling
d) Modeling and simulation
View Answer
Answer: d
Explanation: Modeling and simulation involve the representation of physical systems by
suitable models for describing the behavior characteristics such as block diagram. Hardware
design and simulation is a part of prototyping. Conceptual design and mathematical modeling
come under modeling and simulation.
2. In the level of integration of Mechatronics system, an example of the first level is _____
a) Fluid valves
b) Automatic machine tools
c) Industrial robots
d) Microprocessors
View Answer
Answer: a
Explanation: First level of the mechatronic system is a basic control system which integrates
electrical signal with mechanical action. An example of this level is a fluid valve. Automatic
machine tools and industrial robots come under the second level and the microprocessor in the
third level respectively.
Answer: b
Explanation: Interface design is a part of software integration which involves the Operating
system. Hardware integration involves process design and electronic design respectively.
Page 1
4. What is the role of the second level in the mechatronics system design?
a) Integrates microelectronics into electrically controlled devices
b) Integrates electrical signal with mechanical action
c) Advanced control strategy level
d) Providing artificial intelligence
View Answer
Answer: a
Explanation: Role of the second level is to integrate Microelectronics into electrically
controlled devices. Integration of electrical signal with mechanical action, Advanced control
strategy, and artificial intelligence comes under the first, third and fourth level of mechatronics
design respectively.
Answer: c
Explanation: Microprocessor based electrical motors are used for actuation purpose in robots.
The other functions such as Correction before a fault occurs, Providing intelligence or
prediction of fault in the system is done using Artificial intelligence.
Answer: a
Explanation: Deployment is the third main step in the process of a mechatronics design
process. It is associated with the final product, Embedded software deployment, and life cycle.
Answer: a
Explanation: Hardware design and simulation is a part of Prototyping. Conceptual design and
mathematical modeling come under modeling and simulation.
Page 2
8. What is the function of “analysis” in the modeling and simulation phase?
a) Database for maintaining project information
b) Sub models for eventual reuse
c) Contains Numerical methods
d) To produce high-level source code
View Answer
Answer: c
Explanation: Analysis provides numerical methods for frequency domain, time domain, and
complex domain design. Database for maintaining project information, Sub-models for
eventual reuse are part of project management. High-level source codes are produced by the
code generator.
Answer: a
Explanation: In Modeling and simulation, physical systems are represented by a suitable model
for describing the behavior characteristics such as a block diagram. Hardware design and
simulation is a part of Prototyping. Deployment is associated with the final product, Embedded
software deployment, and life cycle.
Answer: b
Explanation: Prototyping involves replacing non-computer systems with actual hardware.
Conceptual design and mathematical modeling come under modeling and simulation. Database
for maintaining project information, Sub-models for eventual reuse are part of project
management.
Page 3
Page 4