Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 2

2129:ST.

JOSEPH COLLEGE OF ENGINEERING, NEMILI


MODEL EXAM
SEMESTER: II
DEPT: EEE/ECE
EE6201-CIRCUIT THEORY

Time: 3.00 Hours Maximum: 100 Marks


Answer All Questions
PART-A (10x2=20 Marks)
1. Compare series and parallel circuit.
2. What is meant by active and passive elements?
3. Define source transformation.
4. Explain the purpose of star delta transformation.
5. Define Bandwidth of a resonant circuit.
6. Give the application of tuned circuit.
7. Define forced response.
8. Define Transient time.
9. What are the advantage of 3 phase system?
10.Define line voltage and line current.

PART-B (5x16=80 Marks)


11(a) Using the node voltage analysis, find all the node voltages and currents in 1/3 ohm and
1/5 ohm resistances of figure. (16)

(or)
(b) Solve using the mesh analysis (16)

12(a) Find the equivalent resistance between B and C in figure


(or)

(b) Solve using super position theorem (16)

13(a) Derive the expression for equivalent inductance of the series and parallel aiding of the
Resonant Circuit (16)

(or)
(b) Write the mesh equation and obtain the conductively coupled equivalent circuit
for the magnetically coupled circuit (16)

14(a) i) A sinusoidal voltage of10 Sin 100 is connected in series with a switch and R=10 ohm
& L=0.1H.If a switch is closed at t=0,Determine the transient current i(t). (16)

(or)
(b) Derive the expression for the current response of RLC series circuit with sinusoidal
excitation. Assume that the circuit is working in critical damping condition. (16)

(16)

15(a)Explain the power ,power factor measurement in 3 phase circuit by two wattmeter
method (16)
(or)
(b)Explain in detail the phasor diagram of the voltage and current of the 3 phase unbalanced
circuits. (16)

You might also like