Professional Documents
Culture Documents
Motor Starting Calculations Using Motor Characteristics Model PDF
Motor Starting Calculations Using Motor Characteristics Model PDF
• With the characteristics model and motor load model, ETAP can simulate the motor
starting process.
• It should be noted that both the motor torque and load torque curves entered in the
library are based on motor rated output torque.
• In the simulation calculations, these torques need to be converted to a new base that is
dependent on motor efficiency and rated power factor.
• The motor acceleration torque reported in the plot and text report is based on this new
base.
• Therefore, the acceleration torque reported by ETAP may not be equal to the difference
between the motor torque and the load torque entered in the library.
This document is confidential and proprietary to Operation Technology, Inc. and may not be reproduced, published or disclosed to
others without the written authorization of Operation Technology, Inc., 17 Goodyear, Suite 100, Irvine, CA 92618, USA. © 2010 by
Operation Technology, Inc. All Rights Reserved.