Professional Documents
Culture Documents
Catalogo Magam
Catalogo Magam
Catalogo Magam
Automotive industry
Aeronautical industry
Railway industry
SPECIFICATIONS
Accuracy +_ 0,04 mm (2σ)
MAGAM
FLUSH AND GAP MEASUREMENT
Resolution 0,01mm
Sensor weight 900 g
Household appliance industry Sensor dimensions 250 x 90 x 185mm
Operator interface: input 4 buttons
Operator interface: output LCD 2 lines x 16 characters
Electrical supply 110-240V AC
Laser source (IEC 60825-1) Class II
ION
S.S. del Moncenisio, Km. 42,200
TCH
10050 BRUZOLO (TO)
Tel +39 011 9635511
Fax +39 011 9635566
ISIT
www.coord3.com
AL
MA
P
info@coord3.com
GA
NU
QU
MIS
AN
MA
AC
OF
FLUSH AND GAP
MAGAM gap
flush
control buttons
MEASUREMENT
The inspection of flush and gap represents a very challenging and important
operation for several industrial fields, particularly automotive and aeronautical
display
applications. MAGAM is a very innovative technique, which provides a complete
solution to this specific requirement. Magam projects two
The system is composed of a manual instrument incorporating a video camera parallel laser beams
and two laser sources connected to a portable PC via a direct cable connection. and a video camera reads
Magam is essentially based on optical principles and does not involve any physical the image produced by
contact with the surface: the laser sources produce two parallel beams that are the beams on the surfaces
detected by the video camera and processed by the software. The measurement is to be measured.
therefore objective and independent of the instrument's manual orientation. The reason for the double
beam is that this way perfect
MAGAM measures flush and gap simultaneously and laser beams and automatic alignment is
the results are listed on the PC screen and on the
sensor's display. obtained. For particular cases
The management software, in WINDOWS®, allows
range of vision on surfaces that are not large
you to prepare the nominal data and process the enough one beam only can be
results for statistical purposes. projected. In this case however,
the physical alignment of the gun
MAGAM can be used on metal surfaces of any is carried out by the operator
colour, rubber, plastic and also on transparent and will affect the result
MAGAM
materials treated previously with opaque spray. of the measurement.