Professional Documents
Culture Documents
Lubricated Plug Valves: Price List #3119 - Effective: 3/1/19
Lubricated Plug Valves: Price List #3119 - Effective: 3/1/19
Lubricated Plug Valves: Price List #3119 - Effective: 3/1/19
14
13 7
8b 10
15 11
8a 4
Homestead Lubricated
Plug Valves — 9
6
dependability and 1 3
8c 2
economical service. 12 11
1. 2. 3. 4. 5.
T his plug was removed T he plug was again Now valve has been lso, in the Homestead
A ee for yourself the risk
S
from a Homestead withdrawn form the purposely over-lubricated Valve with controlled involved when a valve
Valve just after starting valve body just after a as indicated by excess lubrication, you will which does not have
lubrication, and before ring of lubricant around lubricant around stem. note that even though Homestead’s controlled
all sealing areas were the stem indicated that Note that with controlled the valve has been pressurized lubrication
filled with lubricant. the system was full. pressurized lubrication over-lubricated, is over-lubricated.
Note that pressurized Note that all lubricant there is no extrusion or lubricant comes only
note:
lubricant continues to grooves are filled. The seepage of lubricant to the bottom edge of
extrude through feeder entire plug surface is into valve port opening. the plug, and is not Lubricant has been
holes. Momentary coated with lubricant. This means no waste, wasted by discharging forced into the port
downward movement Lubricant is well packed no contamination of line in quantity into the opening. It can
of plug at start of each into the stem sealing fluids, no clogging of bottom chamber. contaminate line fluids,
lubrication, gives area above the plug. low pressure lines with foul meters or orifices,
assurance that plug is lubricant, or fouling of or even block low
always free to turn. meters, orifices, etc. pressure lines!
* Unretouched Photos. In some instances pictures shown do not represent the lubrication fitting currently being sold.
EXPORT BOXING
Consult factory for pricing. Lubricated Plug Valve Features............................. Inside Front Cover
(1) Must Be Ordered at Time of Unit Purchase
(2) Add to Unit List Price
Prices shown in this list supercede all previously published
prices and are subject to change without notice.
24-Hour shipment of stock items available at additional
$75.00 handling charge.
Dimensions shown in this price list are approximate and for
estimating only. Certified engineering drawings are available
on request.
601 1/2 146 41/4 F 24 61/4oz. B 56 602-UL (1) 1 284 81/2 G 32 73/4oz. B 56
3/4 146 41/4 F 24 61/4oz. B 56 11/4 346 14 G 32 73/4oz. B 56
200lb. WOG UL Listed
1 187 51/2 G 32 73/4oz. B 56 11/2 359 141/2 G 32 73/4oz. B 56
100% Pipe Area 200lb. WOG
11/4 221 9 G 32 73/4oz. B 56 100% Pipe Area 2 394 23 E 47 131/4oz. C 75
Cast Iron Screwed
11/2 242 93/4 G 32 73/4oz. B 56 Cast Iron Flanged 21/2 542 34 E 47 131/4oz. C 75
Wrench Operated
2 301 17 E 47 131/4oz. C 75 Wrench Operated 3 647 47 L 64 1lb. 3oz. C 75
21/2 462 231/2 E 47 131/4oz. C 75 4 799 80 N* 113 1lb. 8oz. C 75
3 541 40 L 64 1lb. 3oz. C 75 5 2,081 118 N* 113 1lb. 8oz. C 75
4 887 73 N* 113 1lb. 8oz. C 75 6 2,611 145 N* 113 1lb. 8oz. C 75
601-CSA (1) 1/2 172 41/4 F 24 61/4oz. B 56 602-A 4 1,999 105 N* 113 1lb. 8oz. C 75
3/4 172 41/4 F 24 61/4oz. B 56 5 3,026 155 N* 113 1lb. 8oz. C 75
CSA Approved 200lb. WOG
1 213 51/2 G 32 73/4oz. B 56 100% Pipe Area 6 3,686 183 N* 113 1lb. 8oz. C 75
125lb. WOG 8 5,121 305 P* 178 71/2lb. D 114
100% Pipe Area 11/4 247 9 G 32 73/4oz. B 56 Cast Iron Flanged
11/2 268 93/4 G 32 73/4oz. B 56 Wrench Operated 10 11,904 525 P* 178 71/2lb. D 114
Cast Iron Screwed
2 327 17 E 47 131/4oz. C 75 12† 13,298 600 P* 178 71/2lb. D 114
Wrench Operated
21/2 488 231/2 E 47 131/4oz. C 75 602-G 4 2,248 123 – – – C 75
3 567 40 L 64 1lb. 3oz. C 75 5 4,055 218 – – – C 75
200lb. WOG
4 913 73 N* 113 1lb. 8oz. C 75 6 4,395 245 – – – C 75
100% Pipe Area
601-UL (1) 1/2 172 41/4 F 24 61/4oz. B 56 Gear Operated 8 6,668 349 – – – D 114
3/4 172 41/4 F 24 61/4oz. B 56 Flanged 10 12,962 644 – – – D 114
UL Listed 12† 16,487 708 – – – D 114
200lb. WOG 1 213 51/2 G 32 73/4oz. B 56
100% Pipe Area 11/4 247 9 G 32 73/4oz. B 56 602-SJ 1 659 9 G 32 73/4oz. B 56
Cast Iron Screwed 11/2 268 93/4 G 32 73/4oz. B 56 11/4 695 141/2 G 32 73/4oz. B 56
200lb. WOG
Wrench Operated 2 327 17 E 47 131/4oz. C 75 100% Pipe Area 11/2 755 15 G 32 73/4oz. B 56
21/2 488 231/2 E 47 131/4oz. C 75 Cast Iron Steam 2 810 24 E 47 131/4oz. C 75
3 567 40 L 64 1lb. 3oz. C 75 Jacketed 21/2 1,041 35 E 47 131/4oz. C 75
4 913 73 N* 113 1lb. 8oz. C 75 Wrench Operated 3 1,212 51 L 64 1lb. 3oz. C 75
601-SJ 1/2 449 5 F 24 61/4oz. B 56 4 1,413 83 N* 113 1lb. 8oz. C 75
3/4 449 5 F 24 61/4oz. B 56 5 3,123 130 N* 113 1lb. 8oz. C 75
200lb. WOG
1 545 61/2 G 32 73/4oz. B 56 6 3,677 154 N* 113 1lb. 8oz. C 75
100% Pipe Area
11/4 580 101/2 G 32 73/4oz. B 56 8 5,610 315 P 178 71/2lb. D 114
Cast Iron Steam
Jacketed Bonnet 11/2 601 101/2 G 32 73/4oz. B 56 603 1/2 360 4 F-M 24 61/4oz. B 56
Wrench Operated 2 762 191/2 E 47 131/4oz. C 75 3/4 365 8 G-M 32 73/4oz. B 56
200lb. WOG
21/2 996 271/4 E 47 131/4oz. C 75 1 466 8 G-M 32 73/4oz. B 56
3-Way Screwed
3 1,128 44 L 64 1lb. 3oz. C 75
100% Pipe Area 11/4 592 15 G-M 32 73/4oz. B 56
4 1,560 80 N* 113 1lb. 8oz. C 75 Cast Iron 11/2 640 15 G-M 32 73/4oz. B 56
601-FMA (2) 1/2 421 41/2 F Included – B 56 2 Port Plug 2 795 241/4 E-M 47 131/4oz. C 75
3/4 438 41/2 F Included – B 56 Wrench Operated 21/2 1,114 38 E-M 47 131/4oz. C 75
FM Approved 3 2,078 68 N*-M 113 1lb. 8oz. C 75
1 460 6 G Included – B 56
50lb. WOG 4 3,363 112 N*-M 113 1lb. 8oz. C 75
100% Pipe Area 11/4 692 91/2 G Included – B 56
Cast Iron Screwed 11/2 708 101/4 G Included – B 56 603-SJ 1/2 675 41/2 F-M 24 61/4oz. B 56
2 794 18 E Included – C 75 3/4 708 9 G-M 32 73/4oz. B 56
Wrench Operated 200lb. WOG
21/2 1,129 241/4 E Included – C 75 1 873 9 G-M 32 73/4oz. B 56
3-Way Screwed
3 1,231 41 L Included – C 75 100% Pipe Area 11/4 1,019 151/4 G-M 32 73/4oz. B 56
602 1 258 81/2 G 32 73/4oz. B 56 Cast Iron 11/2 1,059 153/4 G-M 32 73/4oz. B 56
11/4 320 14 G 32 73/4oz. B 56 2 Port Plug 2 1,280 27 E-M 47 131/4oz. C 75
200lb. WOG
11/2 333 141/2 G 32 73/4oz. B 56 Steam Jacketed 21/2 1,742 393/4 E-M 47 131/4oz. C 75
100% Pipe Area
2 368 23 E 47 131/4oz. C 75 Bonnet 3 2,805 73 N*-M 113 1lb. 8oz. C 75
Cast Iron Flanged
Wrench Operated 21/2 516 34 E 47 133/4oz. C 75 Wrench Operated 4 4,353 119 N*-M 113 1lb. 8oz. C 75
3 621 47 L 64 1lb. 3oz. C 75 604 11/2 771 23 G-M 32 73/4oz. B 56
4 773 80 N* 113 1lb. 8oz. C 75 2 969 36 E-M 47 131/4oz. C 75
200lb. WOG
5 2,055 118 N* 113 1lb. 8oz. C 75
3-Way Flanged 21/2 1,281 52 E-M 47 131/4oz. C 75
6 2,585 145 N* 113 1lb. 8oz. C 75 100% Pipe Area 3 2,166 79 N*-M 113 1lb. 8oz. C 75
602-CSA (1) 1 284 81/2 G 32 73/4oz. B 56 Cast Iron 4 3,311 148 N*-M 113 1lb. 8oz. C 75
11/4 346 14 G 32 73/4oz. B 56 2 Port Plug 5 4,902 248 N*-M 113 1lb. 8oz. C 75
CSA Approved
11/2 359 141/2 G 32 73/4oz. B 56 Wrench Operated 6 5,908 356 P* 178 71/2lb. C 75
125lb. WOG
2 394 23 E 47 131/4oz. C 75 8 11,559 515 P* 178 71/2lb. D 114
100% Pipe Area
Cast Iron Flanged 21/2 542 34 E 47 133/4oz. C 75 604-G 4 4,890 275 – – – D 114
Wrench Operated 3 647 47 L 64 1lb. 3oz. C 75 6 8,752 470 – – – D 114
200lb. WOG 3-Way
4 799 80 N* 113 1lb. 8oz. C 75 8 18,389 665 – – – D 114
Flanged 100% Pipe
Area Cast Iron
2 Port Plug
Gear Operated
(1) CSA or UL Tagging Included in Price (2) Wrench and Factory Mutual Tagging Included in Price
* Wrench head only; handle extra at $17.00 LIST per foot, or fraction. † Standard opening. 3-WAY & 4-WAY SEE PAGE 13 FOR PORT POSITIONS M = Star Wrench
(1) CSA or UL Tagging Included in Price (2) Wrench and Factory Mutual Tagging Included in Price
* Wrench head only; handle extra at $17.00 LIST per foot, or fraction. † Standard opening. 3-WAY & 4-WAY SEE PAGE 13 FOR PORT POSITIONS M = Star Wrench
612-CSA (1) 1 210 71/2 F 24 61/4oz. B 56 641 1/2 206 41/2 F 24 61/4oz. B 56
3/4 206 41/2 F 24 61/4oz. B 56
1 1/4 231 101/2 G 32 73/4oz. B 56 200lb. WOG
CSA Approved
11/2 238 101/2 G 32 73/4oz. B 56 Cast Iron 1 240 6 G 32 73/4oz. B 56
125lb. WOG
2 244 19 G 32 73/4oz. B 56 Diamond Port 11/4 289 10 G 32 73/4oz. B 56
Standard Opening
Cast Iron Flanged 21/2 312 291/2 E 47 131/4oz. C 75 Screwed 11/2 309 10 G 32 73/4oz. B 56
Wrench Operated 3 379 39 E 47 131/4oz. C 75 Wrench Operated 2 368 181/2 E 47 131/4oz. C 75
4 506 611/2 L 64 1lb. 3oz. C 75 21/2 569 263/4 E 47 131/4oz. C 75
5 1,025 88 N* 113 1lb. 8oz. C 75 3 693 43 L 64 1lb. 3oz. C 75
6 1,329 100 N* 113 1lb. 8oz. C 75 4 984 75 N* 113 1lb. 8oz. C 75
8 2,374 172 N* 113 1lb. 8oz. C 75 642 1 289 8 G 32 73/4oz. B 56
612-UL (1) 2 244 19 G 32 73/4oz. B 56 200lb. WOG
11/4 349 11 G 32 73/4oz. B 56
21/2 312 291/2 E 47 131/4oz. C 75 11/2 368 141/2 G 32 73/4oz. B 56
UL Listed Cast Iron
3 379 39 E 47 131/4oz. C 75 Diamond Port 2 424 231/2 E 47 131/4oz. C 75
200lb. WOG
4 506 611/2 L 64 1lb. 3oz. C 75 Flanged 21/2 635 363/4 E 47 131/4oz. C 75
Standard Opening
Cast Iron Flanged 5 1,025 88 N* 113 1lb. 8oz. C 75 Wrench Operated 3 774 50 L 64 1lb. 3oz. C 75
Wrench Operated 6 1,329 100 N* 113 1lb. 8oz. C 75 4 1,011 85 N* 113 1lb. 8oz. C 75
5 2,235 132 N* 113 1lb. 8oz. C 75
6 3,368 168 N* 113 1lb. 8oz. C 75
612-A 10 4,118 305 N* 113 1lb. 8oz. C 75
200lb. WOG
12 7,920 475 P* 178 71/2lb. D 114 642-A 6 4,515 195 N* 113 1lb. 8oz. C 75
14 14,787 RTF P* 178 71/2lb. D 114 8 5,348 275 P* 178 71/2lb. D 114
Cast Iron Standard 200lb. WOG
Opening Flanged Cast Iron Diamond 10 10,854 410 P* 178 71/2lb. D 114
Wrench Operated Port Flanged
Wrench Operated
612-G 6 3,031 143 – – – C 75
8 4,047 280 – – – D 114 642-G 6 5,986 320 – – – C 75
200lb. WOG 8 7,596 405 – – – D 114
Cast Iron 10 6,137 370 – – – D 114 200lb. WOG
12 8,602 550 – – – D 114 Cast Iron Diamond 10 12,297 590 – – – D 114
Standard Opening
Flanged 14 13,746 1090 – – – D 114 Port Flanged
Gear Operated 16 22,748 1321 – – – D 114 Gear Operated
18 28,069 1610 – – – D 114
651 1/2 239 5 F 24 61/4oz. B 56
20 37,580 2165 – – – D 114 3/4 239 8
200lb. WOG G 32 73/4oz. B 56
24 48,078 2810 – – – D 114
Round Port 1 268 8 G 32 73/4oz. B 56
612G-CSA (1) 6 3,057 143 – – – C 75
100% Pipe Area 11/4 364 10 G 32 73/4oz. B 56
8 4,073 280 – – – D 114 11/2 385 15 G 32 73/4oz. B 56
CSA Approved Cast Iron
125lb. WOG Screwed 2 514 27 L 64 1 lb. 3oz. C 75
Standard Opening Wrench Operated 21/2 681 42 L 64 1 lb. 8oz. C 75
Cast Iron Flanged 3 831 62 N* 113 1 lb. 8oz. C 75
Gear Operated 4 1,377 170 P* 178 71/2lb. D 114
651-SJ 1/2 544 51/4 F 24 61/4oz. B 56
612-SJ 1 574 8 F 24 61/4oz. B 56 3/4 544 81/4 G 32 73/4oz. B 56
11/4 599 11 G 32 73/4oz. B 56 200lb. WOG
200lb. WOG 1 669 9 G 32 73/4oz. B 56
11/2 608 111/4 G 32 73/4oz. B 56 Round Port Steam
Cast Iron 11/4 952 103/4 G 32 73/4oz. B 56
2 646 20 G 32 73/4oz. B 56 Jacketed
Standard Opening 100% Pipe Area 11/2 969 153/4 G 32 73/4oz. B 56
21/2 658 301/2 E 47 131/4oz. C 75 2 1,156 291/2 L 64 1 lb. 3oz. C 75
Flanged Cast Iron Screwed
Steam Jacketed 3 886 43 E 47 131/4oz. C 75 21/2 1,359 433/4 L 64 1 lb. 3oz. C 75
Wrench Operated
Wrench Operated 4 1,048 641/2 L 64 1lb. 3oz. C 75 3 1,516 62 N* 113 1 lb. 8oz. C 75
5 1,621 92 N* 113 1lb. 8oz. C 75
6 1,926 109 N* 113 1lb. 8oz. C 75
652 1 372 101/4 G 32 73/4oz. B 56
11/4 407 141/2 G 32 73/4oz. B 56
8 3,217 180 N* 113 1lb. 8oz. C 75 200lb. WOG
Round Port 11/2 448 20 G 32 73/4oz. B 56
622 2 497 23 E 47 131/4oz. C 75
100% Pipe Area 2 578 33 L 64 1 lb. 3oz. C 75
200lb. WOG 21/2 613 34 E 47 131/4oz. C 75 21/2 791 51 L 64 1 lb. 3oz. C 75
Cast Iron Flanged
100% Pipe Area 3 813 47 L 64 1lb. 3oz. C 75 3 934 70 N* 113 1 lb. 8oz. C 75
Wrench Operated
Cast Iron Flanged 4 1,467 80 N* 113 1lb. 8oz. C 75 4 1,925 152 P* 178 71/2lb. D 114
Wrench Operated 5 2,993 135 N* 113 1lb. 8oz. C 75
6 3,163 164 N* 113 1lb. 8oz. C 75
652-A 4 3,160 182 P* 178 71/2lb. D 114
6 6,992 372 P* 178 71/2lb. D 114
622-A 6 3,649 205 N* 113 1lb. 8oz. C 75 200lb. WOG
8 12,910 815 P* 178 71/2lb. D 114
8 6,110 405 P* 178 71/2lb. D 114
Round Port
200lb. WOG 100% Pipe Area 10 24,203 1146 P* 178 71/2lb. D 114
100% Pipe Area 10 11,961 655 P* 178 71/2lb. D 114
Cast Iron Flanged
Cast Iron Flanged Wrench Operated
Wrench Operated
652-G 4 4,211 241 – – – D 114
622-G 6 5,352 260 – – – C 75
6 10,244 459 – – – D 114
8 7,493 490 – – – D 114 200lb. WOG
200lb. WOG Round Port 8 16,194 969 – – – D 114
100% Pipe Area 10 15,723 871 – – – D 114
100% Pipe Area 10 24,263 1321 – – – D 114
Cast Iron Flanged 12 20,667 1076 – – – D 114
Cast Iron Flanged 12 33,051 1620 – – – D 114
Gear Operated Gear Operated
(1) CSA or UL Tagging Included in Price (2) Wrench and Factory Mutual Tagging Included in Price
* Wrench head only; handle extra at $17.00 LIST per foot, or fraction. † Standard opening. 3-WAY & 4-WAY SEE PAGE 13 FOR PORT POSITIONS M = Star Wrench
686 3W-2P 6 6,986 RTF P* 178 71/2lb. C 75 712 6 2,642 185 N* 113 1lb. 8oz. C 75
200lb. WOG 8 10,375 RTF P* 178 71/2lb. D 114 500lb. Water
3-Way Flanged 125lb. Gas
Standard Opening Ductile Iron
Cast Iron 2 Port Plug Standard Opening
Wrench Operated Flanged
Wrench Operated
688 3W-3P 6 6,986 RTF P* 178 71/2lb. C 75
200lb. WOG
8 10,375 RTF P* 178 71/2lb. D 114 712-G 6 5,570 225 – – – C 75
3-Way Flanged 500lb. Water 8 6,275 295 – – – D 114
Standard Opening 125lb. Gas 10 13,612 405 – – – D 114
Cast Iron 3 Port Plug Ductile Iron 12 17,202 675 – – – D 114
Wrench Operated Standard Opening
711 1 230 RTF F 24 61/4oz. B 56 Flanged
Gear Operated
11/4 298 RTF G 32 73/4oz. B 56
500lb. Water
125lb. Gas 11/2 327 RTF G 32 73/4oz. B 56 712-G 14 29,537 1600 – – – D 114
Ductile Iron 2 381 RTF G 32 73/4oz. B 56
300lb. Water 16 31,982 RTF – – – D 114
Standard Opening 21/2 600 RTF E 47 131/4oz. C 75
3 605 RTF E 47 131/4oz. C 75 125lb. Gas
Screwed Ductile Iron
Wrench Operated 4 973 RTF L 64 1lb. 3oz. C 75
Standard Opening
Flanged
Gear Operated
* Wrench head only; handle extra at $17.00 LIST per foot, or fraction.
SEALANT ACCESSORIES
Type A Stick or AS Cartridge Sealant Gun Optional Straight Head for Type A Sealant Gun
For use with stick or cartridge sealant. It is fed by turning threaded
plunger. Weight 12lb. Use size “J” sealant stick.
SEALANT GUN (with coupler & hose assembly) SEALANT TO FIT TYPE A, AS & B GUNS
Type List Price Lubricant List Price
A uses J Stick 1,201 J 16 Sticks 13/8" x 83/4" 758 (carton of 16)
AS uses Cartridge 1,409 Cartridge 141/2 oz. 67 each
B uses J Stick 1,760 785 (carton of 12)
Optional Straight Head Hose 345
Pressure Gauge 306
SIZE FF EE LL NN PP GG
Square 13/16" 11/4" 117/32" 21/32" 215/32" 15/16"
Length 161/4" 193/4" – – – RTF
Approx.
Wt.-Lb. 15/8 45/8 81/2 15 35 RTF
PARTS FEATURES
ADAPTERS STOP RINGS FOR 3 AND 4 WAY VALVES
Adapters may be had for all sizes and
types of wrench operated valves with
stem square dimensions less than 2".
All adapters have 2" square head so that
they may be operated with a size “N”
wrench or socket wrench.
STEAM JACKET BONNET FLANGED BODY SCREWED BODY ROUND PORT DIAMOND PORT RECTANGULAR
PLUG PLUG PLUG (Standard)
BONNET LUBRICANT CHECK VALVE SPRING REINFORCED TEFLON® STEEL TEFLON® THRUST
SCREW AND THREAD SEAL STEM SEAL DISC DISC
Position 1 Position 2
3 WAY / 2 PORT
STYLE A 3 Way / 2 Port / 90˚ Turn STYLE P 3 Way / 2 Port / 180˚ Turn STYLE R 3 Way / 2 Port / 180˚ Turn
STYLE I 3 Way / 3 Port / 180˚ Turn STYLE J 3 Way / 3 Port / 180˚ Turn
STYLE M 3 Way / 3 Port / 270˚ Turn STYLE N 3 Way / 3 Port / 270˚ Turn
How to order: When ordering three-way valves, specify the size and figure number of the valve, plus the style letter of the port position desired.
Example: 3" – figure 606, Style C. Three-way and four-way valves can be furnished without stop-rings to allow a full 360˚ turn. Three types of stop-rings are shown on page 12.
The Seller shall not be bound by any contract until approved in writing by an officer of the WARRANTY
Seller at the Seller’s principal place of business. The contract when so approved shall supercede Seller warrants that the goods manufactured by it and delivered or the services provided
all previous communications, either oral or written. No modification shall be binding upon the shall be free from significant defects in material and workmanship for a period of one year
parties unless such modification shall be in writing duly executed by the Buyer and approved form the date of shipment of goods or a period of 60 days form the completion date of any
by an executive officer of the Seller. services provided the goods or equipment are used within the service or pressure range for
which they were manufactured. Seller shall, at its option, repair or replace any nonconformity
RISK OF LOSS by suitable repair or replacement FOB Seller’s Plant, or by refunding the purchase price. This
Unless specifically agreed in writing, all freight damages shall be paid by the Buyer and risk warranty shall apply only if the goods were installed in their "as shipped" condition and were
of loss or damage to the goods passes to Buyer upon delivery of the goods by Seller to the installed, maintained, and operated in accordance with any specific recommendation of Seller.
carrier regardless of FOB designations. Seller reserves the right to select the means of This warranty does not cover deterioration by corrosion or aging parts, including stress
transportation routing and to ship loads of any quantity without charge to Seller. Seller corrosion. Repairs or alterations not authorized in writing by Seller shall void this warranty.
retains a security interest in the goods or any replacements thereof regardless of the Any material, equipment, or part furnished by Seller but manufactured by others, shall only
mode or attachment to realty or other property until final payment in cash has been made carry whatever warranty the manufacturer thereof has conveyed to Seller and which can be
therefore. Any damage or loss of goods during shipment must be reported to the carrier passed on to Buyer.
and to Seller before the unloading of such goods. Any claims for such damage or loss
must be presented to Seller within 90 days of delivery. Compliance with the foregoing shall constitute fulfillment of all liabilities of Seller for any
defect or nonconformity whether arising in contract warranty, negligence, indemnity, strict
DELIVERY liability, or otherwise.
Any delivery dates or schedules quoted by Seller shall be interpreted as estimates only and
in no event shall such dates b constructed as failing within the meaning of "time is of the THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, SELLER
essence." DISCLAIMS, THE IMPLIED OR MERCHANTABILITY AND FITNESS FOR PURPOSE.
If any goods shall be sold by the Seller to meet Buyer’s specifications or requirements, TERMS
Buyer agrees to defend, protect, indemnify and save harmless the Seller from any loss, Terms of payment are Net 30 days. Unpaid balance beyond 30 days shall bear interest at the
damage, or injury arising out of the claim, suit or action at law or in equity for actual or rate of 2% per month or the lawful maximum whichever is less.
alleged infringement of any patent of the U.S. or any foreign country because of such
specifications or requirements in the sale of such goods and to defend such suit or MINIMUM BILLING
actions which may be brought against the Seller. "Minimum billing of $200 ($50 for parts) net will be charged per order or any partial shipment
requested by customer. Change orders and and/or "add on" supplements are subject to
CONFIDENTIAL INFORMATION additional billings commensurate with the cost and will receive individual consideration
All drawings, designs, specifications, and technic information prepared or submitted by insofar as minimum billing, freight allowance and discount are concerned.
Seller are confidential documents which are the sole property of Seller and shall not be
used or turned over, directly or indirectly, in whole or in part to any person or persons not RETURNS, CANCELLATIONS, AND CLAIMS
authorized by Seller in writing to inspect, poses, or use same. No material may be returned for credit or adjustment without permission and return tagging
instructions—in writing—from our General Office.
LIMITATION OF LIABILITY
IN NO EVENT SHALL THE TOTAL LIABILITY IF THE SELLER ARISING OUT OF THE On all material approved for return for credit, handling/restocking costs, if any, and costs to
PERFORMANCE OF BREACH OF THIS CONTRACT, WHETHER BASED ON CONTRACT, recondition for resale as new will be charged. Orders for items of special design, size, or
WARRANTY, NEGLIGENCE, INDEMNITY, STRICT LIABILITY OR OTHERWISE, EXCEED material will not be accepted for credit nor will cancellation of such orders be accepted
THE PURCHASE PRICE OF THE EQUIPMENT UPON WHICH SUCH LIABILITY IS BASED. except upon written agreement to allow for payment for expenses incurred by Olson
Technologies covering special work which has been performed or material that has been
THE SELLER SHALL IN NO EVENT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, ordered. Claims, for errors, corrections shortages or deductions for erroneous charges must
INDIRECT, SPECIAL OR PUNITIVE DAMAGES ARISING OUT OF THIS CONTRACT OR ANY be made in writing within ten days after the receipt of products and must refer to date and
BREACH THEREOF, OR ANY DELAY IN DELIVERY OR DEFECT IN THE GOODS. PURCHASED number of invoice. In making claims for shortages of products or any overcharges, the
HEREUNDER, WHETHER BASED UPON LOST PROFITS OR REVENUE, WORK STOPPAGE, original paid freight must accompany each claim which in case of shortage should bear
IMPAIRMENT OF OTHER GOODS LOSS BY REASON OF SHUT-DOWN OR NON OPERATION notification to the effect. Seller shall be obligated to substantially perform hereunder only and
OR INCREASED EXPENSES OF OPERATION, WHETHER OR NOT SUCH LOSS OR DAMAGE shall not be liable for any non-material or insubstantial breach or violation hereof and shall
IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE INDEMNITY, STRICT LIABILITY OR not be responsible or liable to Buyer for any claimed breach or violation of this Agreement
OTHERWISE. unless notified in writing by the Buyer thereof within ten days after such breach of violation is
known or could have been known to Buyer by reasonable inspection, but in no event shall
Seller shall not be responsible for any loss or damage resulting from any delay in delivery of Seller, except as specifically provided herein, be liable therefore, whether such breach is
failure to perform, due to war, civil riots, civil insurrection or acts of the common enemy, fire, patent or latent for any notice of claim received more than one year after the date of ship-
floods, strike or other labor difficulties, acts of civil or military authority, including governmental ment. Approval by Buyer’s inspector of work in progress shall be conclusive and binding on
laws, orders priorities, regulations, acts of the purchaser, embargo, any shortage, wreckage Buyer with respect to such work.
or delay in transportation, inability to obtain necessary labor, materials or manufacturing
facilities, faulty foregoing or casting or other causes beyond the reasonable control of the ASSIGNMENT
Seller. In the event of delay in performance due to any such cause, the estimated date of Buyer shall not assign or transfer this contract without prior written consent of the Seller.
delivery or time for completion will be adjusted to reflect such delay. The Buyer’s acceptance
of the goods shall constitute a waiver of all claims for delay. GOVERNING LAW
This contract shall be interpreted and enforced in accordance with the laws of the
Clerical and stenographical errors are subject to correction. Commonwealth of Pennsylvania