Professional Documents
Culture Documents
Seplite MC3600 NH4 PDF
Seplite MC3600 NH4 PDF
PRODUCT INFORMATION
SEPLITE® Monojet™ MC3600 NH4
Uniform particle size, macroporous, Strong acid cation resin for Industrial Stock Code 300487
demineralization and condensate polishing applications
·Descriptions
SEPLITE® Monojet™ MC3600 Ion Exchange Resin is a high-quality, high-capacity resin with uniform particle size designed specifically for use
in condensate polishing mixed beds when high purity and water quality are required. It also can be used in demineralization of water for industrial
steam generation.
With its outstanding mechanical strength and very good oxidative stability, it is suitable for the high flow rate demands of condensate polishing
applications.
<0.3mm ≤0.1%
≥0.85mm ≤3.0%
Operating pH 0-14
·Applications
-Industrial softening when treating water with high oxidant level and high temperature.
-Condensate polishing.
-Industrial demineralization.
·ADD: No. 135, Jinye Rd, Xi'an Hi-tech Industrial Development Zone, Shaanxi, 710076, China
en.sunresin.com ·Tel: +86 29 8669 1600#8091 ·Fax: +86 29 88453538 website: www.seplite.com
2/2
PRODUCT INFORMATION
SEPLITE® Monojet™ MC3600 NH4
Uniform particle size, macroporous, Strong acid cation resin for Industrial Stock Code 300487
demineralization and condensate polishing applications
·Precautions
Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
SEPLITE® and Monojet™ are registered trademarks of Sunresin New Materials Co. Ltd., Xi`an
·This information is general information and may differ from that based on actual conditions. For more information about SEPLITE® resins,
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies
where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as
to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the
basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current
version of our General Conditions of Sale and Delivery.
·ADD: No. 135, Jinye Rd, Xi'an Hi-tech Industrial Development Zone, Shaanxi, 710076, China
en.sunresin.com ·Tel: +86 29 8669 1600#8091 ·Fax: +86 29 88453538 website: www.seplite.com