Professional Documents
Culture Documents
Artificial Lift Technology Quizzes Questions: Lecture # 1 Sept 3, 2020
Artificial Lift Technology Quizzes Questions: Lecture # 1 Sept 3, 2020
• True
• False
• True
• False
• Nozzle
• Diffuser
• Surface pumping unit
• Stator
• Rod string
• Subsurface pump
• Mandrel
4. When reporting Sucker rod sizes, how many sizes are being
reported in the 96 API rod strings
• One size 7/8 inches
• Three sizes 1, 7/8 and ¾ inches
• Two sizes 1 and 7/8 inches
• Four sizes 1/8,1, 7/8 and ¾ inches
7. Which of the following are not API Steel Sucker Rod Grades
• Grade C
• Grade K
• Grade F
• Grade D Carbon, Grade D Alloy and Grade D Special alloy
8. When reporting Sucker rod sizes, how many sizes are being
reported in the 86 API rod strings
• One size 7/8 inches
• Three sizes 1, 7/8 and ¾ inches
• Two sizes 1 and 7/8 inches
• Four sizes 1, 1/8,1, 7/8 and ¾ inches
Answer
1. Gear Reducer Peak Torque
2. Max Polished Rod Capacity
3. Maximum Stroke Length
4. Type of Pumping Unit
5. Double Reduction Gear Reducer
2. From the below statements select the one better describes the
sucker rod surface Pumping Unit functionality.
• The main function of the surface Pumping Unit is to increase the
production from the reservoir.
• The main function of the surface Pumping Unit is to rotate the
downhole pump.
• The main function of the surface Pumping Unit is to stroke the
downhole pump.
7. For maximum depletion and /or gas problem locate the sucker
rod pump
• One to three tubing joints below perforations
• One to three tubing joints below wellhead
• Ten joint above the top of perforations
• 40 %
• 45 %
• 35 %
• 30 %
Artificial Lift Technology Quizzes Questions
True or False
15. Continuous sucker rod pumping operation is
recommended to keep fluids moving to avoid sand fallback
and bridging.
a. True
b. False
Matching question
16. Match the best answer describe the following pump
dynamometer cards:
4
0
3
0
2
0
1 2
1 NOON 1 2 3
1
0
F
re
eG
as
GHT
i
nPu
m
p
1 M IDNI
10
4
9 5
8 6
P
M 7
a. Normal
b. Pump off with gas interferance
c. Free gas in pump
d. Power flactuation
e. All of the above
a. 5000 BPD
b. 4400 BPD
c. 4800 BPD
d. 4200 BPD
e. 4000 BPD
Artificial Lift Technology Quizzes Questions
1. For gas lift system, the gas lift valves are placed in
……………………..
a. lubricator
b. Manderals
c. Diffusers
d. Stators
4. For Jet pump, when the power fluid travels at high pressure
through the nozzle, the …………………………… effect occurs
increasing the speed and reducing the pressure.
a. Centrifugal
b. Hydraulic fluid
c. Venturi
d. Rod String
5. What are the main components for downhole jet pump
a. Nozzle
b. Throat
c. Diffuser
d. All of the above