Only for Training 3 Installation
cee PA al acti elem ea Roa ad lee mu-key sit (elar-l|
CTT
3.12.1 Common settings for network connection
(1) Creating the DR-V network settings table
For all devices connected to DRV, write the device name, AE titie*, host name,
port number, and service type in the table below.
#: AE title is the name used to identify equipment while DICOM
communication is being performed.
For the name of the device connected to DR, contact the person
responsible for the device.
Device Host name 1 aderess AE title [Portrumber] Service
DRY. ane (#) DRV* 104) Storage
# When multiple DRVs are installed, * is a sequential number starting at 1
‘An example is as follows:
Device Hast name TP address AE title | Portnumber| Service
DAV avi 192,168.61 DaVI 104) ‘Storage
P Printer 192,168.6.10 [PRINTER | 104 Print
ue-+#x0073 | 105” Only for Training”
3 Installation
(2) Setting the DR-V network
Display the Maintenance menu, and then click System Option,
The System Option window appears.
1
[eines
Dioslay Ootion
Print Option
‘Query Option
Sond Ootion
MOD Orton
USB Orion
2 Click the Network tab.
In the Registration / Change / Deletion of an IP address section,
click Add.
The Registration / Change section in the right side of the window becomes
active.
106 | t1e-+x0073Only for Training 3 Installation
Register the Host and IP address items according to the network
settings table that you have created in 3.12.1 (1) Creating the DR-V-
network settings table, and then click OK.
Repeat step 4 for all items in the network settings table.
Click OK each time you register @ new item,
In the Registration / Change / Deletion of AE section, click Add
The Registration / Change section in the right side of the window becomes
active.
L1e-#x0073 | 1073 Installation Only for Training
7 _ Register the AE title, Host, Port number, Relational, Transmit
Data, Service items according to the network settings table that you
have created in 3.12.1 (1) Creating the DR-V network settings
table, and then click OK.
sR 3
ore mmr [
Notes on the settings are given as follows:
AE title
Enter the correct name. AE titles are case-sensitive,
Relational
Normally, select OFF. Select ON only when connecting to the image
server,
Transmit Data
Select Un-comp..
LUT output
If Storage is selected for Service, select Process. In other cases, this
setting has no effect.
Service
See the following example to select the parameter:
Device Service
DAV, NWS, or ather viewer | Storage
Image server ‘Storage, or Query
Worklist server Worklist
Imager Print
8 — Repeat step 7 for all items in the network settings table,
Click OK each time you register @ new item.
9 In AE title of IWS, enter the AE title of the DRV for which
parameters are being specified.
108. | t1e-+x0073Only for Training 3 Installation
10 At the lower right of the System Option window, click OK.
a emma el
The confirmation message Ke~starting is r
appears. In this message dialog box, click OK.
Return to the Maintenance menu.
mired to confirma setup.
11 Inthe Maintenance menu, click Exit.
The Maintenance menu exits.
If this is the first time the network settings are being specified for the currently
selected equipment, proceed to perform the procedure in 3.12.1 (3) Setting
the PC network.
Otherwise, restart DRV. The new settings are applied.
(3) Setting the PC network (Windows®)
1 Display the Windows desktop.
2 On the desktop, right-click Computer, and then from the displayed
menu, select Properties.
Open
@ Neozee
Map nator ive.
crete snonait
Dette
LieHx0073 | 109