Professional Documents
Culture Documents
Arlon 3000 XT:: Superior Insulative Performance For High Power Conductors
Arlon 3000 XT:: Superior Insulative Performance For High Power Conductors
Arlon® 3000 X T: Superior Insulative Per formance For High Powered Conductors
ARLON® 3000 XT:
SUPERIOR INSULATIVE PERFORMANCE
FOR HIGH POWER CONDUCTORS
Volume Resistivity
its electrical resistivity properties. The first test performed was to measure vol-
10000
ume resistivity at 400˚F. Here, a sample disc was placed between electrodes Arlon® 3000 XT
that sent pulses of electricity at increasing voltages. The samples were virgin 1000
PEK
PEEK, PEK and Arlon 3000 XT. The results clearly established that Arlon
® ®
100
3000 XT showed significant insulation resistance: Over 100 times better than PEEK
10
PEEK, and 30 times better than PEK. As an initial test, the samples were
exposed to 5 kV DC. 1
500 1000 1500 2000 2500 3000 3500 4000 4500 5000
The second set of tests focused on time-dependent dielectric breakdown at
Voltage (V)
high temperatures. Each sample was tested up to four hours or until sample
350
was destroyed, at a constant 10 kV DC. At 450˚F, the PEEK and PEK samples
Time to Breakdown at 10kV (s)
300
were both destroyed at an average of 28.5 seconds and 297.5 seconds,
250
respectively. But not Arlon® 3000 XT. In fact, with testing envelope pushed
200
0
PEEK PEK Arlon® 3000 XT
Don’t take our word for it: You be the judge. While the test data set supports
4 HR DIELECTRIC BREAKDOWN TESTING
some of our customers’ requirements, we invite you to join us in expanding the (Test sample thickness: 0.020", voltage: 10 kV DC)
testing envelope further, to 15 kV (AC/DC) or higher. Let us take the next step
Temperature PEEK PEK Arlon® 3000 XT
together and put the material to the test. Please contact your local representa-
tive or visit www.arlon3000xt.com for more information. 400˚ F None None None
w ww. g t we e d . c o m
Arlon® 3000 X T: Superior Insulative Per formance For High Powered Conductors
Contact Us