Professional Documents
Culture Documents
A2 - Painting Procedure PDF
A2 - Painting Procedure PDF
PAINTING SPECIFICATION
Rev.:00 Page 1 of 2
SUBSTRATE, BASE METAL: All external surface of carbon steel and low alloyed steel
All surface should be free from oil, grease, dirt or any other existing contaminants.
Hand tool or power tool clean all bare metal surfaces in accordance with SSPC-SP2/3 or ISO8501-1 St2/3.
% VOL. solids 55 57
Theoretical coverage
m2/L 4.8@DFT 50 micron 11.4@DFT 50 micron
Recoat time
@20℃ & 50%RH minimum: 0.5 hrs minimum: 8 hrs
minimum: 25 minimum: 25
Hand tool or power tool clean all bare metal surfaces in accordance with SSPC-SP2/3 or ISO8501-1 St 2/3.
Remove any loose of flaking coating and feather back all coating edges to provide a suitable surface key for
topcoating.
All surfaces must be clean and dry before coating.
Touch up / Coating repair
All surfaces are to be coated ASAP upon surface preparation completion.
All edges, bolts, nuts and difficult to spray areas require brushing in and stripe coating to achieve adequate
coating thicknesses.
Date: 15-Feb-2012 A2
CONTROL REPORT
Rev.:00 Page 2 of 2
Exp. Date
Part A basement
Quality no. / batch no.
Part B curring agent
Quality no. / batch no.
Wet film thickness micron
Humidity RH%
Adhesion test
Visuel appearance