Professional Documents
Culture Documents
Power Relay JY Series
Power Relay JY Series
n FEATURES
l UL, CSA, VDE recognized
l High sensitivity and low power consumption
l High isolation
l Wide operating range
l DIL pitch terminals
l Plastic sealed type
l Socket mounting type and socket available
l Compatible with solid state relays type SJ (see page
365, 366) in size and pin (terminal) arrangement
l RoHS compliant since date code: 0514-
Please see page 6 for more information
n ORDERING INFORMATION
JY – 12 H E – K P*2
[Example] (a) (*) (b) (c) (d) (e) (f )
1
JY SERIES
n SAFETY STANDARD AND FILE NUMBERS
UL508 (FIle No. E56140)
C22.2 No. 14 (File No. LR35579)
VDE 0435 (File No. 11039-4940-1014)
Please request when the approval markings are required on the cover and/or relay recognized by SEV is re-
n SPECIFICATIONS
3 A Type 5 A Type
Item
JY-( ) W-K JY-( ) -K JY-( ) E-K JY-( ) H-K JY-( ) HE-K
Contact Arrangement 1 form A (SPST-NO)
Gold-plate Gold-plate
Material Gold-overlay
silver cadmium
silver cadmium
silver cadmium silver cadmium
silver
alloy oxide oxide
oxide oxide
Style Bifurcated Single
Resistance (initial) (at 1A 6 VDC) Maximum 30 m Max. 100 mΩ Max. 30 mΩ Max. 100 mΩ
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before pro-
duction since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
JY SERIES
n CHARACTERISTIC DATA
JY SERIES
n REFERENCE DATA
JY SERIES
n DIMENSIONS
l Dimensions l Schematics l PC board mount-
(BOTTOM VIEW) ing hole layout
JY Type (BOTTOM VIEW)
Unit: mm
n SOCKET DIMENSIONS
n NOTES
1. Socket ordering code : JK-4N
2. Standard IC socket is not recommended.
Please use socket "JK-4N".
Unit: mm
JY SERIES
l All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
3. Moisture Sensitivity
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
JY SERIES
©2005 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 12/09/2005.