Professional Documents
Culture Documents
Load Sensing Pressure Booster: 1 Description
Load Sensing Pressure Booster: 1 Description
1 Description
1.1 General
In conjunction with an LS variable-displacement pump, this is too high, and/or the load-sensing line is connected to tank
LS pressure booster can be used wherever the pressure through an orifice (load feedback with bleed-off).
drop in the P-line that connects the pump to the valve block
2 Symbol
LS P
LS+
3 Technical data
IMPORTANT : Values refer to an oil viscosity of 35 mm²/s. For other values, contact BUCHER.
Reference: 100-P-000165-EN-03
Issue: 08.2015 1/2
4 Dimensions
142,5-167
3 115
98
66
10 M14x1,5 M14x1,5
P LS
MA=25Nm
21
400,2
65
32
LS+
37 M14x1,5 ø9
56.5 6,5 - 20 mm
850,2
5 Ordering code
P LS T
6 Installation and adjustment
information 3 4
info.kl@bucherhydraulics.com www.bucherhydraulics.com
E 2015 by Bucher Hydraulics GmbH, D-79771 Klettgau
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Classification: 430.390.310.
2/2 100-P-000165-EN-03/08.2015
LS Pressure Booster