ELECTRICAL MACHINE DESIGN
5.106 Mette
jon. The diameter 0
xpression- ith pressed
The area of the tu sing the above °F ical tubes with Pp)
tubes normally used, is 0 sm and they are apace at 76,20. ELT gurtace for smaller
radiators are i ea greater
volume of ae inereasingly being used as they 6iM 5
tl
: The inner dimensions of the transformer tank are fixed ee a
Transformer and clearances between windings and ee three phase)
2D + D, + 2 (or single phase)
ns of the
e active dimensior
f transformer.
Width of tank
=D+D,+%
where —_D = distance between adjacent limbs,
D, = external diameter of h.v. winding
and = clearance between h.v, winding and tank
Length of tank = L, = D, + 2 the width.
where J = clearance on each side between the winding and tank slong
Fig. 6.86. Tank dimensions,
Height of transformer tank H, = H +h
here H = height of transformer frame and h = clearance (height) between the assembled
ansformer and the tank. This includes the clearance at the base, oil height above the assembled
ansformer space for terminals and tap changing gear. Typical values of clearances b, J and A
e given below :