Professional Documents
Culture Documents
U Double Pipe Heat Exchanger First Papers
U Double Pipe Heat Exchanger First Papers
IN
MECHANICAL ENGINEERING
Submitted by
Asst. prof
1
Regency Institute of
Technology
(Affiliated to Pondicherry University)
Adavipolam, Yanam-533464
DEPARTMENT OF MECHANICAL ENGINEERING
BONAFIDE CERTIFICATE
This is to certify that the Thesis/Dissertation entitled “U
DOUBLE PIPE HEAT EXCHANGER” is being submitted by
BANDARU SAMEER GUPTA (14TB0602), PATURI UDAY KUMAR
(14TB0624), YELLAPU JYOTHI SWAROOP (14TB0645) who are of
Department of MECHANICAL ENGINEERING, Regency
Institute Of Technology, Yanam, during the academic year
2014-2018
Submitted for the University Examination held on:
Signature of the guide Signature of
HOD
2
Signature of the Signature of the
Internal Examiner External Examiner
3
DECLARATION BY THE CANDIDATE
Place: Yanam
Date:
Signature of students
4
ACKNOWLEDGEMENT
We would like to express our profound sense of gratitude to all
for having helped us in completing this dissertation. We would
like to express our deep felt gratitude and sincere thanks to
our guide, Mr. Y.DHANA SEKHAR, M. TECH Associate
Professor of the Department of Mechanical Engineering,
Regency Institute of Technology, Yanam, for his skillful
guidance, timely suggestions and encouragement in
completing this project.
We would like to express sincere thanks to Mr. Y.DHANA
SEKHAR, M. TECH Associate professor of the Department of
Mechanical Engineering, Regency Institute Technology,
Yanam, for providing the necessary facilities for the successful
completion of this work.
We are highly obliged to project coordinator Mr.
Y.DHANA SEKHAR, M. TECH Associate professor of the
department of Mechanical Engineering, Regency Institute of
Technology, Yanam for having extended his affable guidance,
constant supervision and encouragement throughout the
progress of the project, which helped us to complete it within
the stipulated time.
We would like to extent our thanks to the Principal Dr.
K.V.S. NARAYANA for his support during our project work.
We thank him for providing the necessary resources and
facilities to carry out this project in time.
Last but not least, we wish to thank our parents, friends,
all the teaching and non-teaching staff fir their constant moral
support, cooperation and encouragement during this period.
5
CONTENTS
ABSTRACT 1
CHAPTER 1
INTRODUCTION 2
CHAPTER 2
LITERATURE REVIEW 14
CHAPTER 3
MODELLING 18
6
3.2.2 Inner pipe 21
3.2.4 Assembly 26
CHAPTER 4
4.1 Geometry 27
CHAPTER 5
VALIDATION 42
CHAPTER 6
CHAPTER 7
REFERENCES 50