Professional Documents
Culture Documents
Removal / Installation - Pitch Change Links PRE MOD 075606 or PRE MOD 076602 Tail Gearbox
Removal / Installation - Pitch Change Links PRE MOD 075606 or PRE MOD 076602 Tail Gearbox
Version: B2, B3
A. Applicable Documents
1. Main information
AMM 67-21-00,5-1 Rigging - Tail Rotor Flight Controls (Version without
Auto-Pilot)
AMM 67-21-01,5-1 Rigging - Tail Rotor Flight Controls (Version with
Auto-Pilot)
2. Conditional information
AMM 64-10-00,5-1 Tail Rotor Balancing
3. General information
AMM 60-00-00,3-1 General Safety Instruction - Mechanical Assemblies
B. Special Tools
None
C. Materials
CM 514 Varnish
Commercial red and yellow adhesive tape
AMM
Description Reference
Fig. Item
E. Job Set-up
1. Comply with the general safety instructions for the mechanical assemblies (AMM
60-00-00,3-1).
F. Procedure
Figure 1
(4) Safety nut (2) with the new cotter pin (1).
(4) Safety nut (8) with the new cotter pin (9).
G. Close-up
1. Manually check for free rocking of the blade assembly with respect to the rotor
hub.
2. If pitch change links are replaced, check the unbalance of the tail rotor (AMM
64-10-00,5-1).
3. Do the adjustment of the flight controls of the tail rotor (AMM 67-21-00,5-1) or
(AMM 67-21-01,5-1).
Figure 1: Removal / Installation - Pitch Change Links PRE MOD 075606 or PRE MOD
076602
End of Document