Professional Documents
Culture Documents
PS2 Statics of Rigid Bodies2 PDF
PS2 Statics of Rigid Bodies2 PDF
Place in short size bond paper with 1 inch border on all sides. Provide title page with border.
1. Determine the magnitude of the horizontal force P that must be applied to the handle of the bench
vise in order to produce a clamping force of 600 N on the
block. The single square-threaded screw has a mean
diameter of 25 mm and a lead of 7.5 mm. The coefficient of
static friction is µs = 0.25.
2. If θ = 15,
determine the minimum
coefficient of static
friction between the collars A and B and the rod required for
the system to remain in equilibrium, regardless of the weight of
cylinder D. Links AC and BC have negligible weight and are
connected together at C by a pin.
3. If a force of P = 200 N
is applied to the handle of the bell crank, determine the
maximum torque M that can be resisted so that the flywheel is
not on the verge of rotating clockwise. The coefficient of static
friction between the brake band and the rim of the wheel is μs =
0.3.
G. S. BELTRAN, MSCE