Professional Documents
Culture Documents
Stabilizer Shaft Link Replacement
Stabilizer Shaft Link Replacement
Spark
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tire and wheel assemblies. Refer to Tyre and Wheel Removal and Installation .
Tip
1 When removing the stabilizer shaft link nuts, remove both of the upper nuts first and then lift up the stabilizer bar ends in order to get the tool
access to lower nuts.
Tighten
43 N·m (32 lb ft)
2 Front Stabiliser Shaft Link
file:///C:/Users/Starkes/Desktop/2-Tecnico-Spark-GT-M300/EN/Documents_2011/Sparkm300/SM-M/92330067.en.html 1/1