Professional Documents
Culture Documents
CHORD lENGTH cALCULATION
CHORD lENGTH cALCULATION
34.1 Permissible out of roundness of cylindrical shell For Internal Pressure As Per UG-80 (a) (1) :-
The difference between the maximum and minimum inside diameters at any cross section shall not exceed
1% of the nominal diameter at the cross section under consideration.
34.2 Deviation For External Pressure for cylindrical shell As Per UG-80 (b) (2)
34.3 Maximum arc length for cylinder shell under external pressure :- [AS PER FIG. UG - 29.2]
e = 11.76 mm
956 mm
35.1 For Heads under internal pressure :- [AS PER FIG. UG - 81 (a)]
35.2 For Heads for external pressure :- [AS PER FIG. UG - 81 (b)]
Where,
Do = 2597.2 = 162.33 Do = Outside diameter of Head
t 16 t = Thickness of head
From figure UG - 29.2 Maximum arc = 0.11 Do (For Dish Heads) 285.69 mm
571.38 mm
e = 8.32 mm
576 mm
ALTECH IFRASTRUCTURE PVT. LTD.
JOB NO :
EQUIPMENT :
MSN NO. : 0
DRG. NO. : 0 REV. :
36.1 Permissible out of roundness of cylindrical shell For Internal Pressure As Per UG-80 (a) (1) :-
The difference between the maximum and minimum inside diameters at any cross section shall not exceed
1% of the nominal diameter at the cross section under consideration.
36.2 Deviation For External Pressure for cylindrical shell As Per UG-80 (b) (2)
36.3 Maximum arc length for cylinder shell under external pressure :- [AS PER FIG. UG - 29.2]
e = 11.76 mm
956 mm