Professional Documents
Culture Documents
GM Metra-99-2011-Installation-Instructions
GM Metra-99-2011-Installation-Instructions
GM Metra-99-2011-Installation-Instructions
APPLICATIONS
See application list inside
KIT FEATURES
• Double DIN radio provision
• ISO mount unit provision with pocket
KIT COMPONENTS
• A) Double DIN Trim Plate • B) Double DIN Brackets • C) Spacers • D) (4) Carriage Bolts
• E) (4) Kep Nuts • F) (3) Screws w/(3) Speed Clips • G) (4) #8 x 3/8” Phillips Screws • H) Pocket
A B C D E
F G H
TOOLS REQUIRED
Cutting Tool • Phillips Screwdriver • Socket Set
99-2011
Applications
Buick Chevrolet (cont.) Oldsmobile (cont.)
Century 1997-2005 Silverado 2003-2007 Alero 1999-2004
Le Sabre 1995-2005 Suburban 2003-2006 Aurora 1995-2003
Park Avenue 1995-2005 Tahoe 2003-2006 Bravada 1998-2001
Rainier 2004-2007 Tracker 1992-2004 Bravada 2002-2004
Regal 1995-2004 Trailblazer 2002-2009 Cutlass 1997-1999
Rendezvous 2002-2007 Venture 2000-2005 Cutlass Supreme 1995-1997
Riviera 1996-1999 Eighty-Eight 1994-1999
Roadmaster 1995-1996 GMC Intrigue 1998-2002
Skylark 1996-1998 Canyon 2004-up LSS 1996-1999
Envoy 2002-2009 Ninety-Eight 1994-1996
Cadillac Savanna 2001-2007 Regency 1997-1998
Escalade/EXT 2003-2006 Sierra 2003-2007 Silhouette 2000-2004
Fleetwood/ Sonoma 2002-2004
Broughham 1990-1996 Yukon/Denali/XL 2003-2006 Pontiac
Eldorado 1992-1995 Aztec 2001-2005
Seville 1992-1995 Honda Bonneville 2000-2005
Passport 1998-2002 Grand Am 2001-2005
Chevrolet Montana 2000-2005
Avalanche 2003-2006 Hummer Sunfire 2000-2005
Blazer 2002-2005 H2 2003-2007
Cavalier 2000-2005 Suzuki
Colorado 2004-up Isuzu Aerio 2002
Express Van (full size) 2001-2007 Ascender 2003-2009 Esteem 1995-2003
Impala 2000-2005 Amigo 1998-2000 Sidekick 1992-1998
Malibu 2001-2003 I-290/I370 2007-2008 Swift 1995-2001
Malibu Classic 2004 I-280/I350 2006 Vitara 1999-2005
Metro (Geo included) 1995-2001 Rodeo 1998-2004 Grand Vitara 1999-2002
Monte Carlo 2000-2005 Rodeo Sport 2001-2003 XL-7 2001-2002
SSR 2003-2006
S-10 Pickup with Oldsmobile Toyota
DDIN Radio 2002-2004 Achieva 1996-1998 Matrix 2003-2004
Dash Disassembly 99-2011
(Figure C)
(Figure A)
(Figure D)
Dash Disassembly 99-2011
(Figure A) (Figure C)
(Figure D)
Radio Bracket Disassembly 99-2011
(Figure A)
(Figure B)
Dash Disassembly 99-2011
(Figure B)
(Figure C)
Dash Disassembly 99-2011
(Figure C)
(Figure A)
(Figure D)
Dash Disassembly 99-2011
(Figure C)
1 23
(Figure A)
(Figure D)
Dash Disassembly 99-2011
(Figure A) (Figure C)
(Figure D)
Dash Disassembly 99-2011
(Figure C)
(Figure A)
Dash Disassembly 99-2011
Hummer H2 2003-2007
1. Open center console and remove (4)
9/32” screws from console box and
remove box. (Figure A)
2. Remove (4) phillips screws from hinge
on console door inside console and
remove door. (Figure B)
3. Loosen (1) T-15 torx on forward facing
side of shift lever and pull up to remove
(Figure C)
4. Unclip cup holder/shifter trim assembly
and remove. (Figure D) (Figure B)
5. Remove (6) Phillips screws from top of
center console.
6. Remove (2) Phillips screws from inside
pocket on back of center console, then
unclip and remove.
Continued on next page
(Figure C)
(Figure A)
(Figure D)
Dash Disassembly 99-2011
Hummer H2 2003-2007
7. Remove (1) 10 mm bolt to right of
shift lever. (Figure A)
8. Remove (2) Phillips screws from under
console box on drivers side and (2)
Phillips screws from under console
trimtop on passenger side. (Figure A)
9. Slide control assembly rearwards.
(Figure B)
10. Remove (2) T-30 torx bolts from top of
rado/climate control trim and unclip
and remove. (Figure C)
11. Remove (3) 9/32” screws that hold
the radio in. (Figure C)
Continue to kit assembly
(Figure B)
(Figure A) (Figure C)
Dash Disassembly 99-2011
(Figure A)
(Figure B)
Dash Disassembly 99-2011
(Figure A) (Figure C)
Dash Disassembly 99-2011
(Figure A)
TUNE
SEEK
TRACK
AM FM1
FM2 DISK
SCAN
(Figure B)
Dash Disassembly 99-2011
Chevrolet/GM/Metro/Suzuki
Cadillac Fleetwood/Brougham
1. GM vehicles.
Cut tabs highlighted on both sides of
both brackets. (Figure A)
2. Chevy Tracker/Metro/Suzuki.
Cut tabs highlighted on both sides of
both brackets. (Figure B)
3. Cadillac Fleetwood/Broughham.
Cut all tabs highlighted on both sides of
both brackets. (Figure C)
Continued on next page
(Figure A)
(Figure B)
(Figure C)
Tab Instructions 99-2011
Isuzu/Pontiac/Toyota
Cadillac Eldorado/Seville
4. Isuzu Amigo/Rodeo/Rodeo Sport.
Cut tabs highlighted. (Figure D)
5. Toyota Matrix/Pontiac Vibe.
Cut tabs highlighted. (Figure E)
Cut (4) tabs highlighted on double
DIN trim plate. (Figure H)
6. Cadillac Eldorado/Seville.
Cut tabs highlighted on double
DIN brackets. (Figure F) Cut (1) tab
highlighted on top left corner of double
(Figure F)
DIN trim plate. (Figure G)
Continue to kit assembly
(Figure G)
(Figure D)
(Figure H)
(Figure E)
Kit Assembly 99-2011
1. Locate the factory wiring harness in the 2. Using carriage bolts and Keps nuts
dash. Metra recommends using the supplied, mount the factory brackets
proper mating adapter from Metra or to the double DIN trim plate/double
AXXESS. Re-connect the negative DIN bracket assembly, keeping in mind
battery terminal and test the unit for which bracket is top and which one
proper operation. is bottom.
3. Reassemble dash in reverse order
of disassembly.
1
Kit Assembly 99-2011