Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

26/5/2019 3126B Truck Engine Military 6PZ00001-UP(SEBP3020 - 19) - Documentation

Previous Screen
Welcome: r40bgjv
Product: TRUCK ENGINE
Model: 3126 TRUCK ENGINE 6PZ
Configuration: 3126B Truck Engine Military 6PZ00001-UP

Disassembly and Assembly


3126B Truck Engine
Media Number -SENR9524-00 Publication Date -01/11/1999 Date Updated -10/10/2001

i02365033

Fuel Pressure Regulator - Remove and Install


SMCS - 1715-010

Removal Procedure

NOTICE
Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool


Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.

Dispose of all fluids according to local regulations and mandates.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 1/3
26/5/2019 3126B Truck Engine Military 6PZ00001-UP(SEBP3020 - 19) - Documentation

Illustration 1 g01181229

1. Disconnect tube assembly (1) from fuel pressure regulator (2).

2. Remove fuel pressure regulator (2) from the cylinder head.

Installation Procedure

NOTICE
Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

Illustration 2 g01181229
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 2/3
26/5/2019 3126B Truck Engine Military 6PZ00001-UP(SEBP3020 - 19) - Documentation

Note: Ensure that the orifice in fuel pressure regulator (2) is open and clean.

1. Install fuel pressure regulator (2) in the cylinder head at a 10 degree angle from the horizontal centerline.

2. Connect tube assembly (1) to fuel pressure regulator (2).

Copyright 1993 - 2019 Caterpillar Inc. Sun May 26 2019 11:01:17 GMT-0400 (hora de Venezuela)
All Rights Reserved.
r40bgjv
Private Network For SIS Licensees.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/… 3/3

You might also like