This document provides a job safety analysis for tripping in hole. It identifies 6 work sequences, potential hazards for each sequence such as pinch points and back strain, and recommendations to eliminate or reduce hazards. The work involves setting slips, breaking connections, running in hole with a dog collar and hammer union, and running in hole with a drilling plug. Recommendations include using tuggers and placing hands in correct positions to avoid pinch points and back strain when breaking connections and running in hole. The document requires signatures from executing personnel, an HSE supervisor, and rig manager to confirm the associated risks are understood.
This document provides a job safety analysis for tripping in hole. It identifies 6 work sequences, potential hazards for each sequence such as pinch points and back strain, and recommendations to eliminate or reduce hazards. The work involves setting slips, breaking connections, running in hole with a dog collar and hammer union, and running in hole with a drilling plug. Recommendations include using tuggers and placing hands in correct positions to avoid pinch points and back strain when breaking connections and running in hole. The document requires signatures from executing personnel, an HSE supervisor, and rig manager to confirm the associated risks are understood.
This document provides a job safety analysis for tripping in hole. It identifies 6 work sequences, potential hazards for each sequence such as pinch points and back strain, and recommendations to eliminate or reduce hazards. The work involves setting slips, breaking connections, running in hole with a dog collar and hammer union, and running in hole with a drilling plug. Recommendations include using tuggers and placing hands in correct positions to avoid pinch points and back strain when breaking connections and running in hole. The document requires signatures from executing personnel, an HSE supervisor, and rig manager to confirm the associated risks are understood.
This document provides a job safety analysis for tripping in hole. It identifies 6 work sequences, potential hazards for each sequence such as pinch points and back strain, and recommendations to eliminate or reduce hazards. The work involves setting slips, breaking connections, running in hole with a dog collar and hammer union, and running in hole with a drilling plug. Recommendations include using tuggers and placing hands in correct positions to avoid pinch points and back strain when breaking connections and running in hole. The document requires signatures from executing personnel, an HSE supervisor, and rig manager to confirm the associated risks are understood.
Associated Permit No(IF required).: 工作许可号(如果需要) Loacation/Area: Date Of Elaboration: 位置/区域 Work/Job/Project : Crew: 工作/工程名称 TRIPPING IN HOLE 人员: Description For the job: Estimated Time Hours 工作描述: 预计时间: 小时 N0. Work Sequence Hazards or Potential Incidents Recommendations to Eliminate or (Job Steps) Reduce Hazards SET SLIPS IN PROPER WEIGHT HELD IN ELEVATORS UNTIL 1 RECESS AND PINCH POINTS,BACK STRAIN DOG COLLAR INSTALLED. 2 MEN TO INSTALL DC PUT DOG COLLAR ON BREAK CONN ON P/U TUGGER TO BE USED, PLACE HANDS 2 PINCH POINTS,BACK STRAIN SUB AND REMOVE IN CORRECT PLACES CONT TO RIH WITH 3 PINCH POINTS,BACK STRAIN SAME AS ABOVE DC INSTALL X/O AND 4 PINCH POINTS,BACK STRAIN SAME AS ABOVE HW 5 RIH HW TO DP PINCH POINTS,BACK STRAIN SAME AS ABOVE 6 RIH WITH DP PINCH POINTS,BACK STRAIN SAME AS ABOVE
Executor Personnel 执行人员
Company/RIG Position Signature Company/RIG Position Signature 公司/队伍 岗位 签字 公司/队伍 岗位 签字