Professional Documents
Culture Documents
Homework
Homework
Question-2 The wooden T-beam shown in Figure is made from two boards.
If σall = 150 MPa and τall = 100 MPa
100 kN
a) Draw shear force and bending moment diagrams 30kN/m
2a
Question-3 The beam (shown in Fig. 3.a) with the cross section (shown in Fig. 3.b all dimension in
cm).
a) Draw shear force and bending moment diagrams
b) Find the maximum tensile and compressive normal stress due to bending moment.
100 kN
30kN/m 60 cm
20
40
2.0 m 3.0 m 1.5m
20
Question-4 For the state of stress shown in figure and using Mohr’s circle determine:
a) The principle stresses and the principle angles
b) The maximum shear stress and the element’s orientation in this case.
c) The shear stress and normal stresses on an element oriented 30
counterclockwise from the original position.