Professional Documents
Culture Documents
Is 12691 B 2013 PDF
Is 12691 B 2013 PDF
Hkkjrh; ekud
isap pwfM+;k¡ dkVus ls igys Nsnksa osQ fy,
csyukdkj 'kSad okys lcySaM ejksM+h fMªy
( igyk iqujh{k.k )
Indian Standard
SUBLAND TWIST DRILLS WITH CYLINDRICAL SHANKS
FOR HOLES PRIOR TO TAPPING SCREW THREADS
( First Revision )
vkbZlh,l/ICS 25.100.30
© BIS 2013
BUREAU OF INDIAN STANDARDS
MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG
NEW DELHI 110002
jk"Vªh; izkDdFku
;g Hkkjrh; ekud (igyk iqujh{k.k) tks fd vUrjkZ"Vªh; ekudhdj.k laxBu (vkbZ,lvks) }kjk tkjh vkbZ,lvks 3439 % 2003
^isap pwfM+;k¡ dkVus ls igys Nsnksa ds fy, csyukdkj 'kSad okys lcySaM ejksMh fMªy* osQ le:i gSa_ dks Hkkjrh; ekud
C;wjks }kjk Nsnd vkSt+kj fo"k; lfefr ds vuqeksnu vkSj mRiknu ,oa lkekU; bathfu;fjax foHkkxh; ifj"kn~ }kjk LohÑfr
ds ckn x`g.k fd;k x;kA
;g ekud ewyr% 1989 esa çdkf'kr fd;k x;k tks vkbZ,lvks 3439 % 1975 ^NksVs vkSt+kj — isap pwfM+;k¡ dkVus ls igys
Nsnksa osQ fy, lekukarj 'kSad okys lcySaM ejksMh fMªy* vkSj MhvkbZ,u 8378 % 1981 ^isap pwfM+;k¡ dkVus ls igys Nsnksa
osQ fy, vkSj foekspu dkmVjlad osQ fy, lekukarj 'kSad okys lcySaM ejksMh fMªy* ij vkèkkfjr FkkA bl igys iqujh{k.k
dks vUrjkZ"Vªh; Lrj ij gqbZ uohure çxfr ds le:i viuk;k tk jgk gSA
vkbZ,lvks ekud osQ ikB dks fcuk fdlh ifjorZu osQ Hkkjrh; ekud osQ :i esa çdk'ku ds fy, mi;qDr LohÑr fd;k
x;k gSA ;|fi dqN 'kCnkoyh vkSj çpyu Hkkjrh; ekud esa ç;qDr gksus okyh 'kCnkoyh vkSj çpyu osQ vuq:i ugha
gSA fuEu osQ çfr fo'ks"k :i ls è;ku vkdf"kZr fd;k tkrk gS%
d) bl ekud osQ lanHkZ esa tgka dgha ^vUrjkZ"Vªh; ekud* 'kCnksa dk ç;ksx fd;k x;k gS] mUgsa ^Hkkjrh; ekud*
i<+k tk,A
[k) dksek (]) dks n'keyo fpÉ osQ :i esa ç;ksx fd;k x;k gS_ tcfd Hkkjrh; ekudksa esa fojke (-) dks n'keyo
fpÉ osQ :i esa ç;ksx djus dh çFkk çpfyr gSA
bl viuk, x, ekud esa dqN ,sls vUrjkZ"Vªh; ekudksa dk lanHkZ fn;k x;k gS ftuds le:i Hkkjrh; ekud miyCèk gSaA
bu vUrjkZ"Vªh; ekudksa osQ rn~uqlkj ftu Hkkjrh; ekudksa dk LFkkukiUu djuk gS mudh lwph fofnr laLdj.k osQ lkFk
le:irk dh fLFkfr n'kkZrs gq, uhps nh xbZ gS%
vUrjkZ"Vªh; ekud rn~uqlkj Hkkjrh; ekud lekurk dh n'kk
vkbZ,lvks 2306 % 1972 isap pwfM+;k¡ dkVus ls vkbZ,l 10952 % 1984 isp a pwfM+;k¡ dkVus vuq:i
iwoZ ç;ksx osQ fy, fMªy ls iwoZ ç;ksx osQ fy, fMªy dh vuq'kalk
vkbZ,lvks 2768&1 % 1989 lkekU; NwVsa — vkbZ,l 2102 (Hkkx 1) % 1993 lkekU; vuq:i
Hkkx 1% i`Fkd&i`Fkd NwV vaduksa osQ fcuk NwVs% Hkkx 1 i`Fkd&i`Fkd NwV vaduks osQ
jSf[kd vkSj dks.kh; vk;ke fcuk jSf[kd vkSj dks.kh; vk;ke (rhljk
iqujh{k.k)
vkbZ,lvks 3438 % 2003 isap pwfM+;k¡ dkVus ls vkbZ,l 12687 % 2011 isp a pwfM+;k¡ dkVus vuq:i
igys Nsnksa osQ fy, ekslsZ Vsij 'kSad okys ls igys Nsnksa osQ fy, ekslsZ Vsij 'kSad okys
lcySaM ejksMh fMªy lcySaM ejksMh fMªy (igyk iqujh{k.k)
;fn ns[kuk gks fd bl ekud esa fdlh vis{kk fo'ks"k dk ikyu fd;k x;k gS ;k ugha] rks ijh{k.k ;k fo'ys"k.k esa voyksdu
;k x.kuk }kjk izkIr ifj.kke osQ :i esa tks vafre eku vk;k gks] mls vkbZ,l 2 % 1960 ^la[;kRed ekuksa osQ iw.kk±du
lacaèkh fu;e (iqujhf{kr)* osQ vuqlkj iw.kk±d esa cny fy;k tk,A iw.kk±fdr eku esa lkFkZd LFkku mrus gh j[ks tk,¡] ftrus
bl ekud esa fufnZ"V eku esa fn, x, gSaA
i
vkbZ,l/IS 12691 : 2013
vkbZ,lvks/ISO 3439 : 2003
Cutting tools Sectional Committee, PGD 32
NATIONAL FOREWORD
This Indian Standard (First Revision) which is identical with ISO 3439 : 2003 ‘Subland twist drills with
cylindrical shanks for holes prior to tapping screw threads’ issued by the International Organization
for Standardization (ISO) was adopted by the Bureau of Indian Standards on recommendation of the
Cutting Tools Sectional Committee and approval of the Production and General Engineering Division
Council.
This standard was originally published in 1989 based on ISO 3439 : 1975 ‘Subland twist drills with
parallel shanks for holes prior to tapping screw threads’ and DIN 8378: 1981 ‘Subland twist drills with
parallel shanks for holes prior to tapping screw threads and for relief countersink’. This first revision
has been undertaken to harmonize it with the latest developments taken place at international level.
The text of ISO Standard has been approved as suitable for publication as an Indian Standard without
deviations. Certain terminology and conventions are, however, not identical to those used in Indian
Standards. Attention is particularly drawn to the following:
a) Wherever the words ‘International Standard’ appear referring to this standard, they should be
read as ‘Indian Standard’.
b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice
is to use a point (.) as the decimal marker.
In this adopted standard, reference appears to certain International Standards for which Indian
Standards also exist. The corresponding Indian Standards, which are to be substituted in their
respective places are listed below along with their degree of equivalence for the editions indicated:
For the purpose of deciding whether a particular requirement of this standard is complied with, the
final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in
accordance with IS 2 : 1960 ‘Rules for rounding off numerical values (revised)’. The number of
significant places retained in the rounded off value should be the same as that of the specified value
in this standard.
ii
vkbZ,l/IS 12691 : 2013
vkbZ,lvks/ISO 3439 : 2003
Hkkjrh; ekud
isap pwfM+;k¡ dkVus ls igys Nsnksa osQ fy,
csyukdkj 'kSad okys lcySaM ejksM+h fMªy
( igyk iqujh{k.k )
1 fo"k; {ks=k
bl vUrjkZ"Vªh; ekud esa isap pwfM+;k¡ dkVus ls igys Nsnksa osQ fy, csyukdkj 'kSad okys lcySaM ejksMh fMªyksa osQ vk;ke
fufnZ"V gSaA
fMªyksa dks M3 ls M14 dh ço`r jsat esa ehVjh pwfM+;k¡ ([kqjnqjh fip J`¡[kyk) dkVus ls igys Nsnksa dks cukus osQ fy,
fMt+kbu fd;k x;k gSA
;g vUrjkZ"Vªh; ekud vkbZ,lvks 2306 osQ iwjd gSaA
isap pwfM+;k¡ dkVus ls igys Nsnksa osQ fy, ekslsZ Vsij 'kSad okys lcySaM ejksMh fMªyksa dks vkbZ,lvks 3438 esa lacksfèkr
fd;k x;k gSA
2 funsZ'kkRed lanHkZ
bl çys[k osQ mi;ksx osQ fy, fuEu lanfHkZr çys[k vR;ko';d gSA fnukafdr lanHkZ osQ fy, mYys[k fd, x, laLdj.k
dk ç;ksx fd;k tk;sA fnukad jfgr lanHkZ osQ fy, mYys[k fd, x, izys[k dk uohure laLdj.k (;fn dksbZ la'kksèku
gks rks mUgsa lEefyr djrs gq,) dk ç;ksx fd;k tk,A
vkbZ,lvks 2306] isap pwfM+;k¡ dkVus ls iwoZ ç;ksx osQ fy, fMªy
vkbZ,lvks 2768&1] lkekU; NwVsa — Hkkx 1% i`Fkd~&i`Fkd~ NwV vaduksa osQ fcuk jSf[kd vkSj dks.kh; vk;ke
1
vkbZ,l/IS 12691 : 2013
vkbZ,lvks/ISO 3439 : 2003
Indian Standard
SUBLAND TWIST DRILLS WITH CYLINDRICAL SHANKS
FOR HOLES PRIOR TO TAPPING SCREW THREADS
( First Revision )
1 Scope
This International Standard lays down the dimensions of subland twist drills with cylindrical shanks for holes
prior to tapping screw threads.
The drills have been designed to produce holes prior to tapping metric threads (coarse pitch series) over a
selected range of M3 to M14.
Subland twist drills with Morse taper shanks for holes prior to tapping screw threads are dealt with in ISO 3438.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 2768-1, General tolerances — Part 1: Tolerances for linear and angular dimensions without individual
tolerance indications
2
vkbZ,l/IS 12691 : 2013
vkbZ,lvks/ISO 3439 : 2003
3 vk;ke
fp=k 1 vkSj Vscy 1 ns[ksaA
;fn vU;Fkk ?kksf"kr u fd;k x;k gks] rks ;g fMªysa nkfguh-gkFk dfVax gksrh gSaA
a
oSdfYid [kk¡pk
fp=k 1 — csyukdkj 'kSad okys lcySaM ejksMh fMªy
Vscy 1 — isap pwfM+;k¡ dkVus ls igys Nsnksa ds fy, csyukdkj lcySaM ejksM+h fMªy ds vk;ke
lHkh vk;ke feyhehVj esa
d2 d1 l1 a l2 a l3 a
pwM+h
h8 h8
3,4 2,5 70 39 8,8 M3 × 0,5
4,5 3,3 80 47 11,4 M4 × 0,7
5,5 4,2 93 57 13,6 M5 × 0,8
6,6 5 101 63 16,5 M6 × 1
9 6,8 125 81 21 M8 × 1,25
11 8,5 142 94 25,5 M10 × 1,5
13,5 10,2 160 108 30 M12 × 1,75
15,5 12 178 120 34,5 M14 × 2
a dqy yEckbZ l1 vkSj ÝywV dh yEckbZ;k¡ l2 ,oa l3 ij NwV vkbZ,lvks 2768&1 esa nh gqbZ ^vfr [kqjnqjh* oxZ dh gksA
3
vkbZ,l/IS 12691 : 2013
vkbZ,lvks/ISO 3439 : 2003
3 Dimensions
See Figure 1 and Table 1.
a
Optional recess.
Table 1 — Dimensions of Subland twist drills with cylindrical shanks for holes prior to tapping metric
screw threads
Dimensions in millimetres
d2 d1 l1 a l2 a l3 a
Thread
h8 h8
3,4 2,5 70 39 8,8 M3 × 0,5
4,5 3,3 80 47 11,4 M4 × 0,7
5,5 4,2 93 57 13,6 M5 × 0,8
6,6 5 101 63 16,5 M6 × 1
9 6,8 125 81 21 M8 × 1,25
11 8,5 142 94 25,5 M10 × 1,5
13,5 10,2 160 108 30 M12 × 1,75
15,5 12 178 120 34,5 M14 × 2
a
The tolerance on overall length l1 and flute lengths l2 and l3 shall be the “very coarse” class as given in ISO 2768-1.
4
vkbZ,l/IS 12691 : 2013
vkbZ,lvks/ISO 3439 : 2003
[1] vkbZ,lvks 273 % 1979 caèkd & dkcys vkSj isapksa ds fy, fudklh fNæ
[2] vkbZ,lvks 3438 % 2003 isap pwfM+;k¡ dkVus ls igys Nsnksa ds fy, ekslsZ Vsij 'kSad okys lcySaM ejksM+h fMªy
Bibliography
[1] ISO 273:1979, Fasteners — Clearance holes for bolts and screws
[2] ISO 3438:2003, Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
5
Bureau of Indian Standards
BIS is a statutory institution established under the Bureau of Indian Standards Act, 1986 to promote
harmonious development of the activities of standardization, marking and quality certification of goods
and attending to connected matters in the country.
Copyright
BIS has the copyright of all its publications. No part of these publications may be reproduced in any form
without the prior permission in writing of BIS. This does not preclude the free use, in course of imple-
menting the standard, of necessary details, such as symbols and sizes, type or grade designations.
Enquiries relating to copyright be addressed to the Director (Publications), BIS.
Amendments are issued to standards as the need arises on the basis of comments. Standards are also
reviewed periodically; a standard along with amendments is reaffirmed when such review indicates that
no changes are needed; if the review indicates that changes are needed, it is taken up for revision. Users
of Indian Standards should ascertain that they are in possession of the latest amendments or edition by
referring to the latest issue of ‘BIS Catalogue’ and ‘Standards: Monthly Additions’.
This Indian Standard has been developed from Doc No.: PGD 32 (1061).