Professional Documents
Culture Documents
CAN Dacia Logan 12
CAN Dacia Logan 12
16
9
PIN 6
PIN 14
[S1-4] GROUND, BLACK
[S1-3] POWER SUPPLY +12V, RED
* Output [S2-2] is a signal from CAN bus that the ignition is turned on.
If the Terminal GPRS/GPS uses signals from the ignition system of the
vehicle, leave the output [S2-2] unconnected.
TERMINAL GPRS/GPS
Do not connect the output [S2-2] to any of the car’s wires. It can
CAN module [S1-1] SERIAL PORT TX, BLUE/YELLOW
be connected ONLY to Terminal GPRS/GPS.
[S1-2] SERIAL PORT RX, BLUE/RED CAUTION! Connect CAN-bus ([S2-1] and [S2-4]) strictly according to
the installation guide. Connecting to any other twisted pair (even if
[S2-2] POSITIVE WHEN IGNITION ON∗, BROWN (optional) colours are the same) either reduces the number of available
information or completely disables communication.
OUTPUT
CAUTION! CAN module twisted-pairs (CAN-bus and J1708)
must be shortened as much as possible (recommended length is
Dacia Logan II (2012-) max. 20 cm). It cannot get tangled or rolled.