Professional Documents
Culture Documents
RCD Assignment
RCD Assignment
2
DESIGN
reinforced with
at the bottom and
at the top located 65mm from the
maximum compression fiber.
Fc’=34.5 MPa and fy=345 MPa. 14. Determine the safe flexural strength
Assume that the contribution of the design that the cross section shown
compression steel maybe neglected could carry if fc’=20.7 MPa,
and that compression steel yields. fy=414.7 MPa.
250 mm
Determine:
a. Balance steel ratio. 75
b. Depth of compression block. 2-25mmØ
c. Nominal moment capacity of the
beam. 500
510
5-36mmØ
80
CENG 135 Page 3
280 mm