Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Vauxhall Workshop Manuals

HOME MENU

NEXT PAGE > < PREV PAGE

Astra J

Engine > Engine mechanics - 1.6L (LDE, LLU), 1.8L (2H0) > Repair Instructions > Cylinder
Head Replacement - 1.6L LDE, LXV, and 1.8L 2H0,LUW,LFH

Cylinder Head Replacement (1.6L LDE, LXV, and 1.8L 2H0,LUW,LFH)


Special Tools
Privacy Policy
Torque Angle Sensor Kit

Donate and help keep workshop manuals For equivalent regional tools, refer to Special Tools .
freely available.
Removal Procedure

1. Remove the intake manifold. Refer to Intake Manifold Replacement .


2. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement .
3. Remove the camshaft cover. Refer to Camshaft Cover Replacement .
Other Vauxhall Workshop Manuals 4. Remove the timing belt tensioner. Refer to Timing Belt Tensioner Replacement .
Other Makes 5. Remove the 2 camshaft position sensor. Refer to Camshaft Position Sensor Replacement .
6. Remove the 2 camshaft position actuator solenoid valve. Refer to Camshaft Position Actuator Solenoid Valve
Replacement .
Astra J Workshop Manual 7. Remove the 2 camshaft position actuator adjuster. Refer to Camshaft Position Actuator Adjuster Removal .
Preface 8. Remove the timing belt rear cover. Refer to Timing Belt Rear Cover Removal .
General Information 9. Remove engine coolant thermostat housing. Refer to Engine Coolant Thermostat Replacement .
Body Hardware and Trim
Body Repair
Body Systems
General Vehicle Information
Brakes
Diagnostic Navigation
Driveline/Axle
Driver Information and Entertainment
Engine
Technical Service Bulletins
Inspections
Cruise Control
Engine Cooling
Engine Electrical
Engine Exhaust
Engine control and fuel system - 1.6L
(LDE, LLU), 1.8L (2H0)
Engine control and fuel system - 2.0L
Diesel (LCD, LBS, LBX, LBY)
Engine mechanics - 1.6L (LDE,
LLU), 1.8L (2H0)
Repair Instructions
Crankshaft and Bearing Installation
Camshaft Cover Replacement - 1.6L
LDE, LXV, 1.8L 2H0, LUW and LFH
Camshaft Replacement - 1 6L LDE

10. Loosen the 10 cylinder head bolts in sequence as shown.


10.1 Loosen the 10 bolts 90° .
10.2 Loosen the 10 bolts 180° .
×

You might also like