Professional Documents
Culture Documents
IS 1862 - Designation For Studs
IS 1862 - Designation For Studs
IS 1862 - Designation For Studs
IS: 1862-1975 covers the requirements for studs in the diameter range from 3 to 39 mm.
Definitions
Metal End - The end of the stud which is screwed into the component.
Nut End - The end of the stud which is not screwed into the component.
Stud Types
Designation
Studs shall be designated by the name, type, size, nominal length, number of this standard
and symbol for mechanical property class.
Example: A stud of Type A, size M5, nominal length 25 mm and made of steel having
property class 8.8 shall be designated as under.
For information on nut end length and preferred length-size combinations, please see the
specification.