Professional Documents
Culture Documents
Cylinder Head: Cerrar SIS Pantalla Anterior
Cylinder Head: Cerrar SIS Pantalla Anterior
Cerrar SIS
Pantalla anterior
Especificaciones
3406B (PEEC) DIESEL TRUCK ENGINE
Número de medio -SENR3484-03 Fecha de publicación -01/02/1991 Fecha de actualización -28/09/2012
SENR34840033
Cylinder Head
(1) Large bolts (3/4 inch). Put 6V4876 Molycoat on all bolt threads and under bolt heads and tighten
the bolts in the following step sequence:
Step 1. Tighten bolts from 1 through 20 in number sequence to ... 270 ± 25 N·m (200 ± 20 lb ft)
Step 2. Tighten bolts from 1 through 20 in number sequence to ... 450 ± 20 N·m (330 ± 15 lb ft)
Step 3. Tighten bolts from 1 through 20 in number sequence again to ... 450 ± 20 N·m (330 ± 15 lb ft)
Step 4. Install the rocker arm shafts for the engine valves.
Step 5. Tighten bolts from 21 through 26 in number sequence to ... 270 ± 25 N·m (200 ± 20 lb ft)
Step 6. Tighten bolts from 21 through 26 in number sequence to ... 450 ± 20 N·m (330 ± 15 lb ft)
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 10/10/2019
3406B Truck Engine(PEEC) 2EK00001-UP(SEBP1956 - 11) - Sistemas y componentes Página 2 de 2
Step 7. Tighten bolts from 21 through 26 in number sequence again to ... 450 ± 20 N·m (330 ± 15 lb
ft)
Step 8. Tighten the twelve small bolts (2) to ... 45 ± 7 N·m (32 ± 5 lb ft)
(3) Torque for twelve studs in cylinder head ... 30 ± 5 N·m (22 ± 4 lb ft)
(4) Thickness of cylinder head (new) ... 112.78 ± 0.25 mm (4.440 ± .010 in)
(5) Torque for six studs that hold fuel line adapter locks ... 30 ± 5 N·m (22 ± 4 lb ft)
NOTE: Flatness of the cylinder head should be within 0.13 mm (.005 in) total, and a maximum of
0.03 mm (.001 in) for any 76.2 mm (3.00 in) span.
Copyright 1993 - 2019 Caterpillar Inc. Thu Oct 10 16:39:59 CDT 2019
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 10/10/2019