Professional Documents
Culture Documents
2019 Product Catalog
2019 Product Catalog
PRODUCT CATALOG
E L E C T RI C MOTO RS, G E A R MOTORS AND DRIVES
S U B - F RAC T ION A L TO 70 0 H P
® Ultra L
Duck ine
E What’s New in This Catalog
Higher HP Stainless Steel Motors
xte
me
nsio
250T-280T Frame | pg 172
Extre
n
IEC Three Phase Brakemotors
TEFC B3 Mounting | pg 281 & 295
Mo
Globet
fM
otors
What’s Coming
Page 156 Extreme Duck Ultra IEC Motors
1/4 - 1 1/2 KW, Three Phase,
B3/B5 and B3/B14 Flanges
llow Shaft
al Ho M TerraMAX IEC Motors
c .75 - 375kW, Three Phase
oto
ti
rs
Page
s 132-137
1
Table of Contents (cont’d)
Section Page Number Section Page Number
Severe Duty Motors 92 AC Gearmotors 348
IEEE 841 Motors - Higher HP ratings available 93 Inverter Rated - PZ Series 360
Multiguard Motors 99 Kits & Accessories 358
WattSaver e® Plus - Mill & Chemical Duty 95 Parallel Shaft P240 351
WattSaver e Plus with C-face - Mill & Chemical Duty 97 Parallel Shaft PZ 349
Special Voltage 236 Parallel Shaft, P1100 355
200/400 Volt 242 Parallel Shaft, P240 Washdown Duty 351
50 Hz 243 Parallel Shaft, PE350 353
575 Volt 237 Right Angle 356
Medium Voltage 247 Right-Angle Washdown Duty 357
Washdown Duty Motors 143 AC & DC Controls 362
575 Volt - White Epoxy Painted 151 DC Drives 364
Brakemotors - White Epoxy Painted 154 DC Dual Mode 369
Brakemotors - Stainless Steel 180 DC Low Voltage 368
DC Stainless 182 DC SCR 4 Quad Chassis 366
DC Washdown - White Epoxy Painted 157 DC SCR Rated 368
Extreme Duck® Ultra Encapsulated Stainless 184 AC Drives 370
Extreme Duck Ultra With Shaft Grounding Rings 188 FHP® Series 371
Explosion Proof White Epoxy 156 Inverter Kits and Accessories 394
Feather Picker 153 Micro Series NEMA® 1 384
Gearmotors - AC & DC White Epoxy Painted 159 Micro Series NEMA 4/12 & 4X 386
General Purpose White Epoxy Painted -1 & 3 Phase 147 Platinum e™ VSD 391
IEC / Metric Stainless 181 Platinum e™ VSD Plus 393
Jet & JM Pump Motors - White Epoxy Painted 151 SM Series 372
JM Pump Motors - Stainless Steel 180 SM Plus Series 374
Pedestal Fan - Stainless Steel 171 SM2 Vector Series NEMA 1 379
Premium Stainless 1 & 3 Phase 174 SM4 Vector Series NEMA 4/12 382
Premium Stainless with Shaft Grounding Rings 178 Motor Accessories / Kits 398
Q-Car™ Rotor Cartridge Kits 187 Blower Kits 410
SST™ Stainless - 1 & 3 Phase 170 C Flange Kits 400-405
Washdown II Series / Paint Free 169 Cast Iron Fan Guard / Severe Duty Kits 406
Washguard® Brake Kits 156 CE Conversion Kits 414
Washguard Coupler Brakes 156 Conduit Box Kits 412
DC Motors 304 D Flange Kits 398
IEC Commercial Duty Low Voltage 320 Drip-Cover Kits 408
Explosion Proof 308 Encoder Kits 411
IEC / Metric 312 Q-Car™ Rotor Cartridge Kits 407
Low Voltage (12, 24, 36, & 48 V) 316 Rodent Screen Kits 405
Low Voltage Metric 318 Shaft Grounding Kits 415
NEMA® Frame SCR Rated 306 Slide Base / Transition Bases 413
Stainless Washdown Duty 321 Terminal Block Kits 412
Sub-FHP Low Voltage 319 Motor Modifications, MOD-SQUAD 418
Sub-FHP Washdown Duty 311 Factory Options 431
Sub-Fractional HP 310 General Information
Washdown Duty 309 Technical Information 6 & 464
Gearmotors 324 Warrnings and Cautions 476
DC Gearmotors 328 Terms and Conditions 6
Parallel Shaft, OS300 - SCR & Low Voltage 333 Index 451
Parallel Shaft, P1100 337 Dimension Information 467
Parallel Shaft, P300 - SCR & Low Voltage 331 Note Information Inside back
Parallel Shaft, P300 - Washdown Duty 343 flap
Parallel Shaft, PE350 Washdown Duty 345
Parallel Shaft, PE350, SCR & Low Voltage 335
Parallel Shaft, PZ SCR & Low Voltage 329
Right-Angle 339
Right-Angle, Washdown Duty 347
Real-time access
to your account
information
View specs & drawings Place Orders in Real Time View Invoices & Payments
Ship to any location, drop ship, specify Find invoices by date, product, unpaid,
with “catalogue search” (available
ship date and more. Flexibility to ship and more! View online or export invoice
for certain brands only).
order line by line or “complete”. and payment reports into excel format.
3
NEMA is believed to be the trademark of National Electrical Manufacturers Corporation, and is not owned or controlled by Regal Beloit Corporation.
THOUSANDS OF MOTOR AND
CONTROL SOLUTIONS.
ONE MATCHED PERFECTLY TO YOUR NEEDS.
The LEESON® brand spans more than 6,000 stock AC and DC motors, gearmotors and variable-speed
control solutions. All are built for rugged commercial and industrial applications. Whether you need
thousands of motors for OEM applications or a single replacement motor, count on our twenty-three
stocking warehouses in the USA to get it there right when you need it. Whether you need a motor that
withstands extreme temperatures, utilizes a unique mount or other requirement, we have solutions.
Look to Regal and its LEESON brand motors for innovative custom solutions, and personalized service
through your local sales office.
To turn ideas into reality, contact your local sales office or visit regalbeloit.com
4
24 SALES OFFICES
AND/OR WAREHOUSES
ACROSS THE U.S.
ALLENTOWN, PA
ATLANTA, GA
BOSTON, MA
CHARLOTTE, NC
CHICAGO, IL
CINCINNATI, OH
CLEVELAND, OH
DALLAS, TX
DENVER, CO
DES MOINES, IA
GRAND RAPIDS, MI
HOUSTON, TX
INDIANAPOLIS, IN
KANSAS CITY, MO
LOS ANGELES, CA
MILWAUKEE, WI
MINNEAPOLIS, MN
OKLAHOMA CITY, OK
PALM DESERT, CA
SALT LAKE CITY, UT
SAN FRANCISCO, CA
SEATTLE, WA
ST. LOUIS, MO
TAMPA, FL
5
Tech Information Technical Information
Application Information
AGENCY LISTINGS UL and CSA Commitment to RoHS and WEEE European Directives
LEESON® and Lincoln Motors™ fire pump and explosion proof The European directives 2002/95/EC “Restriction of Certain
motors are UL Listed. Other motor types are UL Recognized, Hazardous Substances” (RoHS) and 2012/19/EU “Directives
including models with inherent overheating protection as
on Waste Electrical and Electronic Equipment” (WEEE)
noted (i.e. thermally protected models). LEESON and Lincoln
were enacted to control the amount of certain hazardous
Single Phase
ODP Motors
Motors are also CSA certified for both explosion proof and
non-explosion proof enclosures. substances contained in products shipped into the E.U. RoHS
has undergone two amendments over the years, known as
AC Motors “RoHS 2” (2011/65/EU) and “RoHS 3” (2015/863/EU). The
PMDC Motors + Gear Motors current number of restricted substances stands at 10 and
includes lead, mercury, cadmium, hexavalent chromium,
Non-Explosion Proof UL File No. CSA File No.
polybrominated biphenyls, polybrominated diphenyl ethers,
NEMA® 25-449 Frame E49747 LR2025
TEFC Motors
Single Phase
Tech Information
Application Information
LEESON® and Lincoln Motors™ employ the use of Exxon® HAZARDOUS DUTY® MOTORS
Polyrex® EM grease, a specially formulated bearing grease Hazardous duty motors are totally enclosed (fan cooled
designed for electric motors. Polyrex EM provides superior or non-ventilated) motors designed for applications in
lubricity, durability and resists corrosion, rust and washout. hazardous atmospheres containing explosive gases and/or
combustible dusts.
Single Phase
ODP Motors
Maximum safe mechanical speed capability is a function
of bearing size, type and grease selection, as well as NORTH AMERICAN INSTALLATIONS
rotor balance specifications. Consult the “Maximum North American standards for electric motors generally fall
Safe Mechanical Speed Limits” chart in the “Overspeed into one of two divisions. Division 1 Explosion Proof motors
Capability” section. are UL Listed in accordance with NFPA Class I (flammable
gases) or Class II (combustible dusts) and Groups (gases or
Note that these values do not imply maximum constant dusts), depending upon the atmosphere. Division 2 motors
horsepower RPM. are CSA Certified and are marked similarly to Division 1
TEFC Motors
Single Phase
equipment. Inverter duty motors through 449T frames are
EFFICIENCY CSA Certified for use in Division 2 locations.
When selecting a motor for a particular application, both its
capital cost and the cost of energy for operation should be EUROPEAN INSTALLATIONS
considered. The efficiency of a motor is the ratio of its useful Motors for hazardous locations in Europe must meet a
power output to its total power input and is usually expressed different set of standards and require different markings
in a percentage. Regal motors are designed to meet the strict than those of North America. CENELEC sets the
minimum energy efficiencies from the Department of Energy standards for equipment in hazardous locations and/
ODP Motors
Three Phase
(DOE) effective as of June 1, 2016. Premium efficient motors or explosive atmospheres for motors used in Europe.
in this catalog meet NEMA Premium® unless otherwise These are often referred to as Zone 1 (flameproof) Zone
noted. 1 or Zone 2 (non-sparking) motors and must comply
with the ATEX directive The ATEX directive covers all
ELECTRICAL TYPE/STARTING METHOD electrical equipment used in explosive atmospheres. To
Motors in this catalog are capacitor start, split phase, ensure compliance with the directive, equipment must
permanent split capacitor, or three phase. Capacitor start meet the essential ATEX requirements and carry the CE
TEFC Motors
mark on the nameplate. Other information required on the
Three Phase
motors have high starting torque, high breakdown torque,
and relatively low starting current. Split phase motors nameplate includes the Ex symbol, group & category, Ex
have medium starting torque and medium starting current. protection method, gas group, and temperature code, example
Permanent split capacitor motors have low starting torque ( II 3 G Ex nA IIC T3).
and low starting current. Three phase motors have high
starting, extra breakdown torque, and typically very low The tables on the next page describe Regal
starting current. Single phase motors cannot be applied on motors capabilities by area classification and
variable frequency drives with three phase output.
by temperature code.
Inverter Duty
Motors
ENCLOSURE AND METHOD OF COOLING
Regal motors are available in various enclosures; Dripproof
(DP), Dripproof Force Ventilated (DPFV), Totally Enclosed
Fan Cooled (TEFC), Totally Enclosed Non-Ventilated (TENV),
Totally Enclosed (TEAO) and Totally Enclosed Blower Cooled
(TEBC). Application conditions will determine the type of
motor enclosure required.
Severe Duty
Dripproof motors have open enclosures and are suitable for
Motors
indoor use and in relatively clean atmospheres. Dripproof
motors have ventilating openings constructed so that drops
of liquid or solid particles falling on the machine at an angle
of not greater than 15 degrees from the vertical cannot enter
the machine. Explosion Proof
LEESON® and Lincoln Motors™ For Use In Hazardous (Classified) Locations - North America
Division 1 (Explosionproof and/or Dust-Ignitionproof) Division 2
Class I (Flammable Gases, Vapors, Liquids) Class II (Combustible Dusts) Class I (Gases, Vapors, Liquids) Class II (Combustible Dusts)
Single Phase
ODP Motors
Group A Group B Group C Group D Group E Group F Group G Group A Group B Group C Group D Group E Group F Group G
N Y(+) Y Y Y(++) Y Y Y(+++) Y(+++) Y(+++) Y(+++) N/A* LEESON offers
Division 1 construction
(+) - NEMA® 48 Steel Frame only
(++) - NEMA 56, 143, 145 Steel Frames only
(+++) - Class I, Division 2 motors are three phase only, TEFC or TENV enclosure
*Group E is Division 1 only
TEFC Motors
Single Phase
LEESON and Lincoln Motors For Use In Potentially Explosive Atmospheres (ATEX-Europe)
Gases, Vapors, Mists Dusts/Flyings
Zone 1 Zone 2 Zone 21 Zone 22
Motor Group Group Group Group Group Group Group IIIA Group IIIB Group IIIC Group IIIA Group IIIB Group IIIC
ODP Motors
Platform
Three Phase
IIA IIB IIC IIA IIB IIC (Combustible (Nonconductive (conductive (Combustible (Nonconductive (Conductive
Flyings) Dust) Dust) Flyings) Dust) Dust)
NEMA N N N Y - Ex nA (nonsparking N N N N Y - Ex tc N
143 protection method) (dust
through protected)
449
Frame,
5000
Frame
TEFC Motors
Three Phase
200OC T3 T3
www.regalbeloit.com > products >
then search by item number to verify.
Motors
135OC T3 T4
Tech Information
Application Information
Guidelines for application of general purpose, three phase single phase motors on variable frequency drives to
meet NEMA® MG - 2006 Part 30 and Part 31, Section 4.4.2.
Unless stated otherwise, motor nameplates do NOT include listed speed range.
VARIABLE
CONSTANT TORQUE
TORQUE
ENCLOSURE EFFICIENCY
Single Phase
ODP Motors
ALL
56 143-215 254-286 324-365 404-449
FRAMES
ALL 4&6 4&6 4&6 4&6
NEMA Motors ALL POLES 2-Pole 2-Pole 2-Pole 2-Pole
POLES Pole Pole Pole Pole
Standard (EPAct exempt) 10:1 2:1 2:1 2:1 Contact Engineering
ODP EPAct compliant 10:1 n/a 10:1 2:1 2:1 2:1 Contact Engineering
NEMA Premium 10:1 n/a 2:1 10:1 10:1 10:1
Standard (EPAct exempt) 10:1 2:1 2:1 2:1 Contact Engineering
TEFC Motors
Single Phase
TEFC EPAct compliant 10:1 n/a 2:1 10:1 2:1 10:1 2:1 2:1 2:1 2:1
NEMA Premium 10:1 n/a 2:1 20:1 2:1 20:1 2:1 20:1 2:1 20:1
EPAct compliant 10:1 n/a 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1
TENV
NEMA Premium 10:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1 1000:1
Standard (EPAct exempt) 10:1 10:1 (2) 10:1 (2) 10:1 (2) n/a n/a n/a n/a n/a n/a
Washdown
EPAct compliant 10:1 10:1 (2) 10:1 (2) 10:1 (2) n/a n/a n/a n/a n/a n/a
TEFC
NEMA Premium 10:1 10:1 (2) 10:1 (2) 10:1 (2) n/a n/a n/a n/a n/a n/a
ODP Motors
Three Phase
Standard (EPAct exempt) 10:1 1000:1 1000:1 1000:1 n/a n/a n/a n/a n/a n/a
Washdown
EPAct compliant 10:1 1000:1 1000:1 1000:1 n/a n/a n/a n/a n/a n/a
TENV
NEMA Premium 10:1 1000:1 1000:1 1000:1 n/a n/a n/a n/a n/a n/a
Explosion Explosion proof motors must be properly nameplated with inverter duty information prior to use on VFD.
All efficiency levels
Proof Motors with automatic overload protectors cannot be used on VFDs.
TEFC Motors
Three Phase
All enclosures All efficiency levels 10:1 20:1 Up to 20:1 Up to 2:1
Note (2) - Washdown TEFC motors are rated for 10:1 C.T. 60 minute duty 280 Frame and higher - TEFC -280-360 frame- 2:1 Constant torque
or 2:1 C.T. continuous duty at lowest RPM 400 Frame and higher - Contact local sales office
Lincoln Motors rolled steel - ODP - 280-360 frame - 2:1 Constant torque Stock 90 VDC and 180 VDC Motors 30:1 of rated torque
Application Notes
Bearing currents: Regal recommends that any motors used with variable frequency drives be equipped with suitable means to
protect the motor bearings from shaft currents caused by common mode voltages inherent with operation on a non-sinusoidal
Inverter Duty
power supply. Regal offers several options for motors in non-classified (non-hazardous) locations, including ground brushes,
Motors
insulated bearings and non-contact shaft grounding rings. For more information on ground brushes and bearing currents, see
the VARIABLE SPEED OPERATION section. For installation cost and available options, see the MOD Squad section.
Restricted use: DO NOT APPLY THE FOLLOWING MOTORS ON VARIABLE FREQUENCY DRIVES: single phase motors:
motors with inherent overload protection, multi-speed motors, motors with 1.0 service factor on sine wave power. Fire pump
motors should not be used with variable frequency power supplies, due to the critical nature of these applications.
Hazardous locations: Consult with Regal when applying motors and drives into hazardous locations, either Division/Zone 1
Severe Duty
or Division/Zone 2 areas. UL and CSA policies prohibit the installation of bearing protection devices, such as shaft grounding
Motors
brushes, rings or insulated bearings on motors in hazardous locations.
STANDARD MOTOR INSULATION SYSTEMS Maximum Cable Lengths from the Motor to Drive
3 kHz CARRIER FREQUENCY (PHASE TO PHASE)*
PRODUCT DESCRIPTION
Explosion Proof
364-5013 NEMA, 250-315 IEC frames 1000 ft. 225 ft. 60 ft.
Motors with corona resistant magnet wire 1500 ft. 475 ft. 140 ft.
Motors with IRIS® or Spike Defense™ insulation Unlimited Unlimited 650 ft.
Form-wound low voltage motors Unlimited Unlimited 650 ft.
Standard Motor Insulation Systems * Higher carrier frequencies require shorter cable length to
IRIS® Insulation System obtain normal (50Khrs) insulation life.
Duty Motors
Automotive
the drive to the motor for the specific application. The operation to zero speed. Operation above base speed
correct voltage boost and volts/hertz settings are application significantly adds to the load on the motor; therefore,
dependent and unique to each motor design. Procedures for a factory representative must review applications
these adjustments should be in your VFD user manual. requiring variable torque above base speed. Refer to the
Many vector-duty and inverter-duty motors in this catalog application chart found on page 9 for use of general
are equipped with thermostats; warranty coverage may be purpose three phase motors on variable frequency
denied if they are not properly utilized. drives. A bypass circuit is often employed in variable
ODP Motors
Three Phase
“Inverter-Duty” (often called “Inverter-Rated”) motors are of operation, and extra care should be taken in the proper
suitable for use with Variable Frequency Drives, as long application of motors, especially at very low speeds. Most
as operation is within the application guidelines published constant torque applications don’t require operation below 10:1
in this catalog. In general, LEESON and Lincoln Motors (i.e. 6 Hz operation on a 60 Hz motor), but an increasing number
three phase, general purpose, NEMA® Design B motors of applications historically reserved for servo and/or stepper
are considered “Inverter-Duty”, and meet or exceed the systems are being served with motors capable of operation
requirements of NEMA MG1, Part 30. As required under beyond 20:1 even up to 2000:1 (zero speed, constant
torque). Refer to the application chart found on page 9
Inverter Duty
frequency drives.
Inverter-Duty (Rated) motors are most often used in 10:1
speed range, variable torque or constant torque applications. A Applications requiring greater than 20:1 C.T. are ideal for
vector control is usually required for operation beyond 10:1 CT. LEESON Inverter Duty/Vector-Duty and Lincoln Motors
Vector-Duty CTAC® motors. These motors provide full-rated
Additional detail regarding a specific product’s capabilities is torque within their listed speed range, without exceeding
a Class F temperature rating while under inverter power
Severe Duty
engineer. (many operate at Class B). Ratings in this catalog have been
developed, based on extensive testing on IGBT inverters, set
VECTOR DUTY at a minimum 3 KHz (or equivalent) carrier frequency.
“Vector-Duty” describes a class of motors that are
used in conjunction with open-loop (without encoder) or Vector-Duty and Inverter-Duty motors from LEESON and
closed-loop (with encoder) Vector controls, that provide Lincoln Motors are designed for operation at 150% of rated
load for one minute, up to the base speed of the motor
Explosion Proof
must be controlled. “Vector-Duty” motors can be applied to maximum constant HP speed). These motors accommodate
Volts/Hertz (scalar) drives, as well. constant horsepower operation to 1-1/2 to 2 times base speed,
subject to the motor’s maximum safe mechanical speed limit.
LEESON vector duty motors and Lincoln Motors CTAC Refer to the Maximum Safe Mechanical Speed Chart, as well
motors, have been specifically designed for optimal operation as the performance section for each motor’s capability.
on vector or volts/hertz controls. These motors feature
a wide constant torque (up to 2000:1) and/or constant Motors rated for zero RPM continuous duty (1000:1 or 2000:1)
Duty Motors
Automotive
horsepower (up to 4:1) speed range and are performance- must be powered by vector drives to produce rated torque
matched to all current technology IGBT drives. Vector without overheating. Optimum zero speed and low-speed full
duty motors meet or exceed the requirements of NEMA torque performance may require a closed loop vector drive
MG1, Part 31, and are equipped with an enhanced IRIS® (with encoder feedback).
Continued on next page
Tech Information
Variable Speed Operation
Single Phase
ODP Motors
speed. Most general purpose motors can deliver constant must be given to ambient noise levels, as operation above
horsepower up to 1 1/2 times base speed (consult a base speed will increase motor noise and vibration, and
factory representative to verify performance). However, reduce bearing life. Under no circumstances should bearing
many constant HP applications require operation to twice hub temperature exceed 100° C. Belted loads should not
base speed, and some, such as coil winders, up to 4 times exceed 60 Hz operating RPM by more than 25% (NEMA®
base speed. “TS” shafts are not suitable for belted loads). Due to external
cooling fans, TEFC (and explosion proof fan cooled) motors
MOTOR GROUNDING are limited to 4000 RPM maximum speed.
TEFC Motors
Single Phase
Frames and accessories of all motors must be grounded
in accordance with the National Electric Code (NEC) Article
430. Refer to NEC Article 250 for general information on
grounding. Proper grounding of inverter-driven motors is Maximum Safe Mechanical Speed Limits
essential to protect personnel and livestock from inverter- (ODP, TENV, DPFV OR TEBC ENCLOSURES)
sourced common mode voltages, which may reach 60 Hz base frequency
hazardous levels on the frame of ungrounded or poorly
ODP Motors
grounded motors.
Three Phase
Frame Size 2-Pole 4, 6 or 8-Pole
56-184 7200 5400
LOW INPUT VOLTAGE 213-256 5400 4200
If, due to lower utility supply voltage, the input voltage 284-286 5400 3600
from the VFD to the motor is lower than the motor’s
324-326 4000 3600
rated voltage, de-rating of the motor’s base frequency,
horsepower, full load RPM, and constant HP RPM is 364-365 4000 2800
required. The revised values can be calculated by multiplying 404-449 3600 2800
TEFC Motors
Three Phase
by the ratio of the voltage change. For example, to operate a 5000 Fr N/A CALL
460 volt motor from an inverter fed by 50 or 60 HZ, 400 volt 6800 Fr N/A CALL
utility power, the multiplier is 400/460 or 0.87.
Inverter Duty
begin at the new base frequency and will be shortened by
Motors
the same ratio as described above.
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
12
Technical Information
Tech Information
LEESON Model Number Nomenclature
®
LEESON MOTOR MODEL NUMBER NOMENCLATURE Odd frequencies other than 50 Hz show synchronous
All LEESON motors, both stock and custom, have a catalog speed code. DC and special motors may have one, two, or
number and a model number. The model number appears three digits indicating motor speed rounded to the nearest
on the motor’s nameplate and describes pertinent electrical hundred RPM.
and mechanical features of the motor. An example follows EXAMPLE:
Single Phase
ODP Motors
along with a listing of the various letters and positions used. Position No. 1 2 3 4 5 6 7 8
POSITION 1: U.L. PREFIX Sample Model No. A 4 C 17 D B 1 A
A = Auto protector. UL recognized for locked rotor plus POSITION 4: RPM
run, also recognized construction (UL 1004)*. RPM-Single Speed RPM-Multi-Speed
C = Component recognition. (UL 1004) No protector. 34 = 3450 RPM 60 Hz 2 Pole 24 = 2 and 4 Poles
L= Locked rotor protector (automatic or manual) 28 = 2850 RPM 50 Hz 2 Pole 26 = 2 and 6 Poles
U.L. recognized for locked rotor only, also recognized 17 = 1725 RPM 60 Hz 4 Pole 82 = 2 and 8 Poles
TEFC Motors
Single Phase
construction (U.L. 1004).* 14 = 1425 RPM 50 Hz 4 Pole 212 = 2 and 12 Poles
M =Manual protector. UL recognized for locked rotor plus 11 = 1140 RPM 60 Hz 6 Pole 46 = 4 and 6 Poles
run, also recognized construction (UL 1004)*. 9 = 950 RPM 50 Hz 6 Pole 48 = 4 and 8 Poles
N = No overload protection. 8 = 960 RPM 60 Hz 8 Pole 410 = 4 and 10 Poles
P = Manual protector. UL recognized construction 7 = 720 RPM 50 Hz 8 Pole 412 = 4 and 12 Poles
(UL1004). 7 = 795 RPM 60 Hz 10 Pole 68 = 6 and 8 Poles
Motor/protector combination not UL recognized. 6 = 580 RPM 50 Hz 10 Pole
ODP Motors
Three Phase
T = Thermostat, not UL recognized. 6 = 580 RPM 60 Hz 12 Pole
U = Auto protector. UL recognized construction
(UL1004). POSITION 5: ENCLOSURE
Motor/protector combination not UL recognized. D= Drip-Proof
*This applies only to 48, S56, and 56 frame designs through 1 HP, Open & TENV.
E= Explosion-Proof TENV
F= Fan Cooled
POSTION 1A:(Optional) N= TENV
This position is not always used. It is driven by product line. O= Open
TEFC Motors
Three Phase
I = IEC DC product S= Splashproof
M = Sub-Fractional HP Motor T= TENV with IP69 rated enclosure
Z = BISCC Approved U= TEFC with IP69 rated enclosure
POSITION 2: FRAME V= Weatherproof, Severe Duty, Chemical Duty,
4 = 48 Frame 24 = 24 Frame 40 = 40 Frame Washgaurd - TENV
6 = 56 Frame 25 = 25 Frame 43 = 43 Frame W = Weatherproof, Severe Duty, Chemical Duty,
42= 42 Frame 30 = 30 Frame 44 = 44 Frame Washgaurd® - TEFC
Inverter Duty
Motors
143 = 143T Frame 31 = 31 Frame X = Explosion-Proof TEFC
145 = 145T Frame 32 = 32 Frame POSITION 6: MOUNTING
182 = 182T Frame 34 = 34 Frame
184 = 184T Frame 38 = 38 Frame B= Rigid base standard
213 = 213T Frame C= “C” face - no base - NEMA®
215 = 215T Frame D= “D” flange - no base - NEMA
254 = 254T Frame H= 48 frame - 56 frame mounting/shaft rigid
Severe Duty
256 = 256T Frame J= 48 frame - 56 frame mounting/shaft resilient
Motors
284 = 284T Frame K= Rigid mount with “C” flange
286 = 286T Frame M= Motor parts - rotor and stator
324 = 324T Frame R= Resilient base
326 = 326T Frame S= Shell motor
364 = 364T Frame T= Round body
Z= Special mounting
Explosion Proof
405 = 405 T Frame Number assigned as required when new designs with
444 = 444T Frame new characteristics are needed.
447 = 447T Frame
POSITION 8: MODIFICATION LETTER
449 = 449T Frame
Major modification letter. Used when revisions made in
POSITION 3: MOTOR TYPE existing model will affect service parts.
C =Cap. Start/Ind. Run T =Three Phase
Duty Motors
Automotive
13
Tech Information Technical Information
Lincoln Motors™ Model Number Defined
C Efficiency Level
H Options/Modifications
D Horsepower
E NEMA Frame Series
®
G Electrical Type (1-PH only),
and Standard Frequency, Voltage and Starting.
TEFC Motors
Single Phase
Tech Information
Lincoln Motors™ Model Number Defined
Single Phase
ODP Motors
F Shaft and Mounting: AP5 Fire Pump certified
AP7 Farm Duty, High Torque
AD = Auger drive R = Resilient mount
AP8 Farm Duty, Extra High Torque
C = C-Face, B14 S = NEMA short shaft
AP9 Grain Stirring
D = D-Flange, B5 Y = special mounting AP10 PSC Variable Speed
J = Jet Pump (ie. extended thru-bolts) AP11 PSC Variable Speed, expanded speed range
JM = JM Pump Mount Z = non-standard shaft AP13 UL Listed Class 1 Groups C & D and
TEFC Motors
Single Phase
JP= JP Pump Mount dimensions (-1, -2, -3, etc. Class 2 Groups F & G, thermostats
L = Locked bearing will appear at the end of AP14 UL Listed Class 1 Groups C & D and Class 2
N = No feet the Model Number) Groups F & G, auto reset thermal protector
AP15 UL Listed Class 1 Group D and
Double shaft motors are identified by two symbols, the first for Class 2 Groups F & G, thermostats
the “normal drive end” and the second for the “opposite normal AP21 China Sourced
drive end”: SD4B30TTM61Y and SD4P75TSTS61Y AP25 China Sourced Ultimate E® Motor
B F-2 Mount
ODP Motors
Three Phase
Each end of the double shaft can have its own mounting:
MD4S125TSCTSC61 and CS6P15TTMC61Y C_ Ceiling Mount - NEMA position follows “C”; 1-2
E3 Class H Insulation
Mounting symbols are listed in alphabetical order when more E5 Class H Insulation & High Temperature Grease
than one is specified: SSD2S25TJMN61 F Fungus Proofing (Tropicalization)
H4 Leads exit motor at 12 o’clock position
G Electrical Type (Single Phase Only): HS Precision Dynamic Balance
HT1 Space Heater, 120V
TEFC Motors
1A = permanent split capacitor
Three Phase
HT2 Space Heater, 240 V
1B = capacitor start, capacitor run
K Omit Terminal Box
1C = capacitor start, induction run L_ Additional Lead Length - “L” followed by
1N = split phase start, capacitor run additional length in inches
1S = split phase MB3 Insulated bearings, both ends
MB6 Double sealed bearings, both ends
Frequency: MK_ Brake installed on motor
Inverter Duty
6_ = 60 Hz and 5_ = 50 Hz Q1 VTAC Inverter Duty Motor
Motors
Q10 CTAC Inverter Duty Motor with provision
Voltage: for mounting feedback device
The specific number has no significance. Lincoln Motors will Q15 CTAC Inverter Duty Motor with factory installed
assign the next number in sequence to a new, previously Dynapar® 625 1024 ppr encoder
unmanufactured voltage when it is ordered. Q15_ CTAC Inverter Duty Motor with factory installed
encoder - letter following “Q15” represents brand
Commonly used voltage codes:
Severe Duty
and ppr rating of encoder, A through S.
60 Hz 50 Hz
Motors
Q20 CTAC Inverter Duty motor without provision
61 = 230/460 V 6026 = 208-230/460 51 = 220/380 V for mounting feedback device
62 = 200/400 6027 = 115/230 52 = 240/415 Q40 CTAC Inverter Duty Motor without provision
63 = 208 6028 = 115/208-230 53 = 230/400 for mounting feedback device
64 = 460 6029 = 208-220/440 54 = 200/400 QS10 Crop dryer (single phase, auto reset)
65 = 575 55 = 380 QS11 Crop dryer (single phase, thermostats)
Explosion Proof
68 = 380 57 = 415
T1 Thermostats, Class F, 3 in series
69 = 480 58 = 440
TD1,2 RTD - Winding, 100 Ω platinum
6003 = 220/380 59 = 220/440
TD4 RTD - Winding, 10 Ω copper
6004 = 220/440 5001 = 190/380 TD6 RTD - Winding, 120 Ω nickel
6020 = 2300 5007 = 346 TP1 Overload protection, manual reset
6021 = 4000 5012 = 550 TP2 Overload protection, auto reset
Duty Motors
Automotive
Applications:
For use where water and dust exposure is minimal. Ideally suited for use on pumps,
Inverter Duty
Tech Information
Capacitor Start – General Purpose
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/4 1800 48 E101423.00 √ 522 M4K17DB13 19 115/208-230 Man. 1.2 1.35 10.37 S, MX, 53
1/4 1800 48 E100115.00 √ 522 A4K17D11 16 115/230 Auto. 1.2 1.35 10.12 S, MX, 53
1/4 1800 S56 E100000.00 √ 540 A4K17DH17 20 115/230 Auto. 1.2 1.35 10.49 S, MX, 53
1/3 3600 S56 100336.00 D 355 C4C34DH11 15 115/208-230 None 2.8 1.35 8.99 S, MX
1/3 3600 S56 E100336.00 √ 454 C4K34DH6 22 115/230 None 1.5 1.35 10.49 S, MX, 53
1/3 1800 48 E100116.00 √ 469 A4K17DB12 16 115/230 Auto. 1.9 1.35 10.62 S, MX, 53
TEFC Motors
Single Phase
1/3 1800 S56 E100006.00 √ 577 C4K17DH5 20 115/230 None 1.9 1.35 10.99 S, MX, 53
1/3 1800 S56 E100588.00 √ 595 M4K17DH17 21 115/230 Man. 1.9 1.35 10.99 S, MX, 53
1/3 1800 S56 LM34481 √ 660 SRD40.33T16027TP1 18 115/230 Man. 1.9 1.35 10.97 S, MX, 53
1/3 1800 S56 E100001.00 √ 599 A4K17DH8 16 115/230 Auto. 1.9 1.35 10.99 S, MX, 53
1/3 1200 56 E104018.00 √ 785 C4K11DH1 26 115/230 None 1.7 1.35 11.99 S, MX, 53
1/2 3600 48 E100184.00 √ 489 C4K34DB1 15 115/230 None 2.2 1.25 10.37 S, MX, 53
1/2 3600 S56 E100337.00 √ 501 C4K34DH5 21 115/230 None 2.2 1.25 10.99 S, MX, 53
1/2 3600 S56 E100052.00 √ 528 M4K34DH12 19 115/230 Man. 2.2 1.25 10.99 S, MX, 53
ODP Motors
Three Phase
1/2 1800 48 E100338.00 √ 633 C4K17DB5 22 115/230 None 2.3 1.25 11.12 S, MX, 53
1/2 1800 S56 E100007.00 √ 633 C4K17DH6 23 115/230 None 2.3 1.25 11.49 S, MX, 53
1/2 1800 S56 E100004.00 √ 659 M4K17DH21 23 115/230 Man. 2.3 1.25 11.49 S, MX, 53
1/2 1800 S56 E100002.00 √ 652 A4K17DH19 23 115/230 Auto. 2.3 1.25 11.49 S, MX, 53
1/2 1200 56 E110002.00 √ 1,187 C6K11DB5 41 115/230 None 2.6 1.25 12.37 S, MX, 53
3/4 3600 S56 E100340.00 √ 600 C4K34DH4 25 115/230 None 3.6 1.25 11.49 S, MX, 53
3/4 3600 S56 100053.00 D 533 M4C34DH3 28 115/208-230 Man. 4.9 1.25 10.49 S, MX
TEFC Motors
Three Phase
3/4 3600 S56 E100053.00 √ 615 M4K34DH13 28 115/230 Man. 3.6 1.25 11.49 S, MX, 53
3/4 1800 56 E119348.00 √ 731 C6K17DB51 40 115/230 None 3.3 1.25 13.15 S, MX, 53
3/4 1800 56 E119855.00 √ 769 M05617DRR70014A3 37 115/208-230 Man. 3.3 1.25 12.49 S, MX, 53
3/4 1800 56 E119854.00 √ 756 56B17DRR70006A3 28 115/208-230 Auto. 3.3 1.25 12.49 S, MX, 53
3/4 1200 56H E110003.00 √ 1,203 C6K11DB6 45 115/230 None 3.3 1.15 13.62 S, MX, 53
1 3600 56 E110360.00 √ 645 C6K34DB31 34 115/230 None 3.9 1.25 11.37 S, US, 53
1 3600 56 E110097.00 √ 662 M6K34DB37 30 115/230 Man. 3.9 1.25 11.37 S, US, 53
Inverter Duty
1 1800 56 110004.00 D 643 C6C17DB2 28 115/208-230 None 6.4 1.15 10.88 S, US
Motors
1 1800 56 E110004.00 √ 840 C6K17DB52 35 115/230 None 4.2 1.15 11.87 S, US, 53
1 1800 56 E110167.00 √ 866 M6K17DB54 33 115/230 Man. 4.2 1.15 11.87 S, US, 53
1 1800 56 E110000.00 √ 851 A6K17DB56 31 115/230 Auto. 4.2 1.15 11.87 S, US, 53
1 1800 143T 120044.00 √ 740 C143C17DB3 41 115/208-230 None 6.4 1.15 11.28 S, US
1 1800 143T 120003.00 √ 779 M143C17DB2 36 115/208-230 Man. 6.4 1.15 11.31 S, US
1 1800 143T 120000.00 √ 778 A143C17DB1 35 115/208-230 Auto. 6.4 1.15 11.33 S, US
Severe Duty
1 1/2 3600 56 E110361.00 √ 975 C6K34DB32 38 115/230 None 6.1 1.15 11.87 S, US, 53
Motors
1 1/2 3600 56 113631.00 D 730 M6K34D15 39 115/208-230 Man. 6.2 1.15 11.37 S, US, 53
1 1/2 3600 56 E113631.00 √ 898 M6K34DB35 39 115/230 Man. 6.1 1.15 12.37 S, US, 53
1 1/2 3600 143T 120107.00 C/A 710 C143C34D1 35 115/208-230 None 8.2 1.15 11.28 S, US
1 1/2 1800 56H E110005.00 √ 956 C6K17DB53 41 115/230 None 6.5 1.15 12.87 S, US, 53
1 1/2 1800 56H 113266.00 D 973 M6K17DB30 45 115/208-230 Man. 6.7 1.15 12.37 S, US, 53
1 1/2 1800 56H E113266.00 √ 986 M6K17DB55 43 115/230 Man. 6.5 1.15 12.87 S, US, 53
Explosion Proof
1 1/2 1800 145T 120042.00 √ 819 C145K17DB5 43 115/208-230 None 8.6 1.15 12.28 S, US, 53
1 1/2 1800 145T LM24687 √ 933 SSD4S1.5T1C6028 39 115/208-230 None 9.0 1.15 12.49 S, MX
Motors
1 1/2 1800 145T 120004.00 √ 1,040 P145K17DB3 43 115/208-230 Man. 8.6 1.15 12.28 S, US, 53
1 1/2 1800 145T 120001.00 √ 1,040 U145K17DB1 43 115/208-230 Auto. 8.6 1.15 12.28 S, US, 53
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
2 3600 56 110363.00 D 939 C6C34DB22 40 115/208-230 None 10.0 1.15 11.84 S, US
2 3600 56 E110363.00 √ 1,021 C6K34DB33 39 115/230 None 8.0 1.15 11.87 S, US, 53
2 3600 56 E113632.00 √ 1,042 M6K34DB40A 31 115/230 Man. 8.0 1.15 12.37 S, US, 53
2 3600 145T 120106.00 √ 1,011 C145C34DB3 43 115/208-230 None 10.5 1.15 12.28 S, US
2 1800 56H 116704.00 D 1,040 P6K17DB47 45 115/208-230 Man. 10.5 1.15 12.68 S, US, 53
2 1800 56H E116704.00 √ 1,101 56B17DRR70033A3 45 115/208-230 Man. 8.6 1.15 14.49 S, MX, 53
TEFC Motors
Single Phase
2 1800 145T 120067.00 √ 976 C145K17DB9 45 115/208-230 None 10.5 1.15 13.28 S, US, 53
2 1800 145T LM24677 √ 1,022 SSD4S2T16028 49 115/208-230 None 10.5 1.15 13.49 S, MX, 53
2 1800 145T 120879.00 √ 1,094 P145K17DB38 54 115/208-230 Man. 8.6 1.15 14.25 S, US, 53
2 1800 182T 131515.00 √ 1,011 C182C17DB8 59 115/208-230 None 12.4 1.15 13.19 S, MX
2 1800 182T 131536.00 √ 1,082 P182C17DB10 66 115/208-230 Man. 12.4 1.15 13.19 S, MX
2 1800 182T 131535.00 √ 1,077 U182C17DB9 66 115/208-230 Auto. 12.4 1.15 13.19 S, MX
3 3600 56H E116706.00 √ 1,094 M6K34DK28A 39 230 Man. 11.6 1.00 13.58 S, US, 53
3 3600 182T 131636.00 √ 1,163 C182K34DB3 77 115/208-230 None 14.0 1.15 14.19 S, MX, 53
ODP Motors
Three Phase
3 1800 184T 131534.00 √ 1,095 C184C17DB19 78 115/230 None 16.9 1.15 14.19 S, MX
3 1800 184T 131561.00 √ 1,295 P184C17DB21 79 115/230 Man. 16.9 1.15 14.19 S, MX
3 1800 184T 131851.00 C/A 1,293 C184K17DB40 75 208-230 Man. 12.8 1.15 13.69 S, MX, 53
3 1800 184T 131530.00 √ 1,295 U184C17DB20 72 115/230 Auto. 16.9 1.15 14.19 S, MX
5 3600 56H 116708.00 √ 1,072 P6K34DB26 45 230 Man. 20.8 1.00 13.34 S, MX, 53
5 3600 184T 131616.00 √ 1,384 C184K34DB3 87 208-230 None 22.0 1.15 14.69 S, MX, 53
5 3600 184T LM24681 C/A 1,419 SS184D2S5T1C6008 87 208-230 None 22.0 1.15 14.69 S, MX, 53
TEFC Motors
Three Phase
5 1800 184T 131537.00 √ 1,313 C184K17DB31 86 208-230 None 21.0 1.15 14.69 S, MX, 53
5 1800 184T LM24682 √ 1,343 SSD4S5T16008 89 208-230 None 20.0 1.15 15.21 S, MX, 53
5 1800 184T 131560.00 √ 1,313 C184K17DB32 85 208 None 23.2* 1.15 14.69 S, MX, 53
5 1800 184T 131622.00 √ 1,570 P184K17DB33 85 208-230 Man. 21.0 1.15 14.69 S, MX, 53
7 1⁄2 3600 184T 132044.00 √ 1,266 C184K34DB8 110 208-230 Tstat 31.0 1.15 16.69 S, MX, 53
7 1⁄2 3600 213T 140680.00 √ 2,136 C213K34DB1 115 208-230 None 29.5 1.15 18.04 S, MX, 53
7 1⁄2 1800 215T 140155.00 √ 1,865 C215K17DB2 116 230 None 36.0 1.15 17.26 S, MX, 53
Inverter Duty
7 1⁄2 1800 215T LM24683 √ 1,967 SS15D4S7.5T16008 116 208-230 None 34.5 1.15 18.05 S, MX, 53
Motors
10 3600 215T 140681.00 √ 2,702 C215K34DB1 126 208-230 None 37.0 1.15 19.29 S, MX, 53
10 1800 215TZ 140311.00 D 2,725 C215K17DB4 159 230 None 43.0 1.25 19.76 S, MX, 53
10 1800 215TZ 141430.00 √ 2,725 C215K17DB18 159 230 None 39.0 1.25 21.09 S, MX, 53
10 1800 215T LM24684 √ 2,793 SSD4S10T16008 140 208-230 None 44.0 1.15 19.29 S, MX, 53
Green items are premium efficient. Note listing on inside back flap.
“E” prefix items comply with SMR 2015. Specifications are subject to change without notice.
Severe Duty
Tech Information
Drip-Proof - Capacitor Start
General Purpose - C Face Less Base
Single Phase
ODP Motors
Single Phase - Drip-Proof - C Face Less Base
SYN App. Over- F. L. “C”
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/4 1800 S56C E100023.00 √ 544 C4K17DC13 17 115/230 None 1.2 1.35 10.74 S,MX,53
1/4 1800 S56C E101521.00 √ 555 A4K17DC19 16 115/230 Auto. 1.2 1.35 10.74 S,MX,53
TEFC Motors
Single Phase
1/3 3600 S56C E100354.00 √ 478 C4K34DC4 17 115/230 None 1.5 1.35 10.24 S,MX,53
1/3 3600 S56C E100355.00 √ 495 A4K34DC6A 15 115/230 Auto. 1.5 1.35 10.49 S,MX,53
1/3 1800 S56C E100024.00 √ 608 C4K17DC12 19 115/230 None 1.9 1.35 10.99 S,MX,53
1/3 1800 S56C LM34059 C/A 610 SRD40.33TLCN1C6028 19 115/230 None 1.9 1.35 10.94 S,MX,53
1/3 1800 S56C E100018.00 √ 627 M4K17DC20 16 115/230 Man. 1.9 1.35 10.99 S,MX,53
1/3 1800 S56C E101522.00 √ 616 A4K17DC21 20 115/230 Auto. 3.4 1.35 10.99 S,MX,53
1/2 3600 S56C E100356.00 √ 519 C4K34DC3 22 115/230 None 2.2 1.25 10.74 S,MX,53
ODP Motors
Three Phase
1/2 3600 S56C E100054.00 √ 539 A4K34DC7 21 115/230 Auto. 2.2 1.25 10.99 S,MX,53
1/2 1800 S56C E100025.00 √ 653 C4K17DC14 22 115/230 None 2.3 1.25 11.49 S,MX,53
1/2 1800 S56C E100019.00 √ 672 M4K17DC23 24 115/230 Man. 2.3 1.25 11.49 S,MX,53
1/2 1800 S56C E100020.00 √ 661 A4K17DC22 23 115/230 Auto. 2.3 1.25 11.49 S,MX,53
1/2 1200 56C E110381.00 √ 1,215 C6K11DC5 37 115/230 None 2.6 1.25 12.37 S,US
3/4 3600 S56C E100357.00 √ 633 C4K34DC5 23 115/230 None 3.6 1.25 11.49 S,MX,53
3/4 3600 S56C E100055.00 √ 630 A4K34DC8 27 115/230 Auto. 3.6 1.25 11.49 S,MX,53
3/4 1800 56C E119349.00 √ 756 C6K17DC50 30 115/230 None 3.3 1.25 13.15 S,MX
TEFC Motors
Three Phase
3/4 1800 56C E119857.00 √ 790 M05617DRC70004A3 24 115/208-230 Man. 3.3 1.25 12.31 S,MX,53
3/4 1800 56C E119862.00 √ 782 A6K17DC49 29 115/208-230 Auto. 3.3 1.25 12.31 S,MX,53
3/4 1200 56C E110382.00 √ 1,306 C6K11DC6 30 115/230 None 3.3 1.25 13.62 S,US,53
1 3600 56C E110384.00 √ 689 C6K34DC25 34 115/230 None 3.9 1.25 11.37 S, US, 53
1 3600 56C E113337.00 √ 710 A6K34DC31 32 115/230 Auto. 3.9 1.25 11.87 S,MX,53
1 1800 56C E110220.00 √ 851 C6K17DC51 37 115/230 None 4.2 1.15 11.87 S,US,53
1 1800 56C E110036.00 √ 883 M6K17DC57 30 115/230 Man. 4.2 1.15 11.87 S,MX,53
Inverter Duty
1 1800 143TC 121002.00 √ 772 C143C17DC2 32 115/208-230 None 6.4 1.15 11.28 S,US
Motors
1 1/2 3600 56C E110387.00 √ 936 C6K34DC26 37 115/230 None 6.1 1.15 11.87 S, MX, 53
1 1/2 3600 56C E113336.00 √ 956 A6K34DC28 31 115/230 Auto. 6.1 1.15 12.37 S, MX, 53
1 1/2 1800 56C 110388.00 D 862 C6K17DC4 41 115/208-230 None 8.6 1.15 11.84 S, MX, 53
1 1/2 1800 56C E110388.00 √ 972 C6K17DC52 39 115/230 None 6.5 1.15 12.87 S, MX, 53
1 1/2 1800 56C E110037.00 √ 995 M6K17DC55A 42 115/230 Man. 6.5 1.15 12.87 S, MX, 53
2 3600 56C E110390.00 √ 1,009 C6K34DC27 38 115/230 None 8.0 1.15 11.87 S, US, 53
Severe Duty
2 3600 56C E113335.00 √ 1,152 A6K34DC29A 38 115/230 Auto. 8.0 1.15 11.87 S, US, 53
Motors
2 3600 145TC 121184.00 C/A 987 C145C34DC4 40 115/208-230 None 10.0 1.15 12.28 S, US
2 1800 56C LM34060 √ 1,137 SRD42TLCN16028 30 115/230 None 6.3 1.15 14.10 S, MX, 53
2 1800 145TC 120073.00 √ 980 C145K17DC4 44 115/208-230 None 10.5 1.15 13.28 S, US, 53
3 3600 56C E113334.00 √ 1,108 A6K34DC32 39 230 Auto. 12.0 1.00 13.50 S, US, 53
3 1800 184TC 131544.00 √ 1,138 C184C17DC5 76 115/230 None 16.9 1.15 14.20 S, MX
5 3600 184TC 131777.00 C/A 1,524 C184K34DC2 73 208-230 None 22.2 1.15 14.70 S, MX, 53
Explosion Proof
5 1800 184TC 131539.00 C/A 1,585 C184K17DC6 84 208-230 None 21.0 1.15 14.70 S, MX, 53
Motors
Green items are premium efficient. Note listing on inside back flap.
“E” prefix items comply with SMR 2015. Specifications are subject to change without notice.
D - Item to be discontinued once inventory is depleted.
C/A - Check availability.
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/3 1800 S56C E103023.00 √ 621 C4K17DK2 20 115/230 None 1.9 1.35 10.74 S, MX, 53
1/3 1800 S56C E103083.00 C/A 645 M4K17DH18A 18 115/230 Man. 1.9 1.35 10.99 S, MX, 53
1/2 3600 S56C E103024.00 √ 527 C4K34DK3 29 115/230 None 2.2 1.25 10.74 S, MX, 53
1/2 1800 S56C E101651.00 √ 679 C4K17DK5 20 115/230 None 2.3 1.25 11.49 S, MX, 53
1/2 1800 S56C E103084.00 √ 738 M4K17DH20A 21 115/230 Man. 2.3 1.25 11.49 S, MX, 53
3/4 3600 S56C E103025.00 √ 690 C4K34DK4 26 115/230 None 3.6 1.25 11.49 S, MX, 53
TEFC Motors
Single Phase
3/4 1800 56C E119350.00 √ 753 C6K17DK44 30 115/230 None 3.3 1.25 13.08 S, MX, 53
3/4 1800 56C E119863.00 √ 798 M05617DRR70016A3 27 115/208-230 Man. 3.3 1.25 12.31 S, MX, 53
1 3600 56C 116769.00 D 570 C6C34DK6 28 115/208-230 None 5.4 1.25 10.87 S, US
1 3600 56C E116769.00 √ 692 C6K34DK23 29 115/230 None 3.3 1.25 11.37 S, MX, 53
1 1800 56C E113930.00 √ 863 C6K17DK45 35 115/230 None 6.0 1.15 11.87 S, MX, 53
1 1⁄2 3600 56C E116770.00 C/A 935 C6K34DK24 36 115/230 None 3.9 1.15 11.87 S, MX, 53
1 1⁄2 3600 56C 114214.00 D 778 M6K34DK8 38 115/208-230 Man. 4.2 1.15 11.34 S, MX, 53
1 1⁄2 3600 56C E114214.00 √ 988 M6K34DK263 38 115/230 Man. 6.1 1.15 12.37 S, MX, 53
ODP Motors
Three Phase
1 1⁄2 1800 56HC E113932.00 √ 984 C6K17DK46 41 115/230 None 6.2 1.15 12.87 S, MX, 53
1 1⁄2 1800 56HC 113700.00 D 1,027 M6K17DK15 41 115/208-230 Man. 6.1 1.15 11.84 S, MX, 53
1 1⁄2 1800 56HC E113700.00 √ 1,027 M6K17DK47 41 115/230 Man. 6.5 1.15 12.87 S, MX, 53
2 3600 56C E116771.00 √ 1,059 C6K34DK25 40 115/230 None 8.0 1.15 11.87 S, MX, 53
2 3600 56C 114215.00 D 987 P6K34DK9 38 115/208-230 Man. 8.6 1.15 11.34 S, MX, 53
2 3600 56C E114215.00 √ 1,085 M6K34DK27 38 115/230 Man. 8.0 1.00 12.37 S, MX, 53
2 1800 56HC 113281.00 D 1,063 P6K17DK12 48 115/208-230 Man. 8.6 1.15 12.87 S, MX, 53
TEFC Motors
Three Phase
2 1800 56HC E113281.00 √ 1,114 M05617DRR70030A3 57 115/208-230 Man. 8.0 1.15 14.30 S, MX, 53
2 1800 145TC 120992.00 √ 931 C145K17DK7 48 115/208-230 None 10.5 1.15 13.28 S, MX, 53
3 3600 56HC E116707.00 √ 1,143 M6K34DK28 41 230 Man. 11.6 1.00 13.50 S, MX, 53
3 3600 182TC 132083.00 C/A 1,215 C182K34DK2 74 115/208-230 None 14.0 1.15 14.20 S, MX, 53
3 1800 184TC 131629.00 √ 1,295 P184C17DK3 69 115/230 Man. 16.9 1.15 14.20 S, MX
3 1800 184TC 131853.00 √ 1,293 C184K17DK18 100 208-230 Man. 13.8 1.15 13.20 S, MX, 53
5 3600 56HC 116709.00 √ 1,102 P6K34DK18 51 230 Man. 20.8 1.00 13.84 S, MX, 53
Inverter Duty
5 3600 184TC 131781.00 √ 1,529 C184K34DK4 73 208-230 None 22.2 1.15 14.70 S, MX, 53
Motors
5 1800 184TC 131630.00 √ 1,591 M184K17DK13 80 208-230 Man. 21.0 1.15 14.70 S, MX, 53
7 1⁄2 3600 184TC 132043.00 √ 1,586 C184K34DK8 112 208-230 T-stats 31.0 1.15 16.70 S, MX, 53
7 1⁄2 1800 215TC 140806.00 √ 1,634 C215K17D5 120 230 None 36.0 1.15 17.26 S, MX, 53
Green items are premium efficient. Note listing on inside back flap.
“E” prefix items comply with SMR 2015. Specifications are subject to change without notice.
D - Item to be discontinued once inventory is depleted.
Severe Duty
Tech Information
WATTSaver® Premium Efficiency Fan Motors
Features Include:
• Premium efficient
• Class F insulation
• Terminal boards
Single Phase
ODP Motors
• Shielded ball bearings
TEFC Motors
Single Phase
RPM NEMA® Catalog List Wgt. load Amps Service % F. L. Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 115 V Factor Eff. (Inches) Notes
1/4 1800 48 101602.00 √ 497 A4K17DR7 22 115 Auto. 2.5 1.35 71.0 10.39 S, MX, 32, 53
1/3 1800 48 101405.00 √ 587 A4K17DR5 22 115 Auto. 3.2 1.35 75.0 10.39 S, MX, 32, 53
1/2 1800 48 101585.00 √ 671 A4K17DR6 23 115 Auto. 4.6 1.35 76.0 11.39 S, MX, 32, 53
Green items are premium efficient. Note listing on inside back flap.
Specifications are subject to change without notice.
ODP Motors
Three Phase
TEFC Motors
Three Phase
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Applications:
For use where exposure to water, dust and dirt exists. Ideally suited for use on pumps,
compressors, fans, conveyors and other industrial equipment.
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Tech Information
Capacitor Start – General Purpose
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/12 1800 42 092111.00 √ 392 C42C17FB3 15 115/208-230 None 1.1 1.15 8.94 S, US
1/8 1800 42 092114.00 √ 405 C42C17FB2 19 115/208-230 None 1.6 1.15 9.44 S, US
1/6 1800 42 092116.00 √ 444 C42C17FB1 20 115/208-230 None 2.1 1.15 9.44 S, US
1/6 1800 48 102012.00 √ 441 C4C17FB23 20 115/208-230 None 2.0 1.15 9.06 S, MX
1/6 1200 48 102013.00 √ 625 C4C11FB3 20 115/208-230 None 1.9 1.15 10.31 S, MX
1/4 3600 42 092112.00 √ 450 C42C34FB3 18 115/208-230 None 2.1 1.15 9.94 S, US
TEFC Motors
Single Phase
1/4 1800 48 102014.00 √ 433 C4C17FB21 18 115/208-230 None 2.7 1.15 9.06 S, MX
1/4 1800 48 101446.00 √ 498 M4C17FB10 18 115/208-230 Man. 2.7 1.15 9.06 S, MX
1/4 1800 S56 LM24606 C/A 588 SRF4S0.25T1C6028 18 115/208-230 None 2.0 1.15 10.22 S, MX
1/4 1200 48 102015.00 √ 665 C4C11FB4 25 115/208-230 None 3.2 1.15 11.31 S, MX
1/4 1200 56 114617.00 √ 701 C6C11FB7 33 115/208-230 None 2.8 1.15 11.99 S, US
1/3 3600 48 102016.00 √ 413 C4C34FB10 16 115/208-230 None 2.8 1.15 9.06 S, MX
1/3 1800 48 100955.00 √ 479 C4C17FB3 17 115/208-230 None 3.3 1.15 9.56 S, MX
1/3 1800 48 102018.00 √ 549 M4C17FB22 23 115/208-230 Man. 3.3 1.15 9.56 S, MX
ODP Motors
Three Phase
1/3 1800 S56 102931.00 √ 477 C4C17FH31 21 115/208-230 None 3.1 1.15 10.44 S, MX
1/3 1800 56 LM24597 √ 502 SRF4S0.33T1C6028 19 115/208-230 None 3.0 1.15 10.47 S, MX
1/3 1800 S56 102933.00 √ 544 M4C17FH33 22 115/208-230 Man. 3.1 1.15 10.44 S, MX
1/3 1800 S56 LM24602 C/A 574 SRF3S0.33T1C6028TP1 20 115/208-230 Man. 3.0 1.15 10.47 S, MX
1/3 1800 S56 102932.00 √ 563 A4C17FH32 21 115/208-230 Auto. 3.1 1.15 10.44 S, MX
1/3 1800 56 113765.00 √ 661 M6K17FB33 26 115/208-230 Man. 1.7 1.15 10.99 S, US, 53
1/3 1200 48 102019.00 √ 734 C4C11FB5 31 115/208-230 None 3.1 1.00 11.56 S, MX
TEFC Motors
Three Phase
1/3 1200 56 110009.00 √ 734 C6C11FB1 31 115/208-230 None 3.9 1.00 12.48 S, US
1/3 1200 56 LM24546 √ 769 SRF6S0.33T1C6028 28 115/208-230 None 3.9 1.15 12.32 S, MX
1/2 3600 48 102020.00 √ 471 C4C34FB9 19 115/208-230 None 3.5 1.15 9.31 S, MX
1/2 3600 S56 102905.00 √ 469 C4C34FH8 20 115/208-230 None 3.5 1.15 9.94 S, MX
1/2 3600 56 LM24706 C/A 493 SRF2S0.5T1C6028 27 115/208-230 None 4.2 1.15 11.82 S, MX
1/2 3600 S56 102904.00 √ 502 M4C34FH7 20 115/208-230 Man. 3.5 1.15 9.94 S, MX
1/2 3600 56 LM24743 √ 528 SRF2S0.5T1C6028TP1 23 115/208-230 Man. 4.2 1.15 11.82 S, MX
Inverter Duty
1/2 1800 48 100956.00 √ 549 C4C17FB4 22 115/208-230 None 4.0 1.15 10.31 S, MX
Motors
1/2 1800 S56 102906.00 √ 544 C4C17FH28 22 115/208-230 None 4.0 1.15 10.69 S, MX
1/2 1800 S56 LM24627 √ 574 SRF4S0.5T1C6028 24 115/208-230 None 4.0 1.15 11.22 S, MX
1/2 1800 S56 102909.00 √ 639 M4C17FH30 22 115/208-230 Man. 4.0 1.15 10.69 S, MX
1/2 1800 S56 LM24604 C/A 674 SRF2S0.5T1C6028TP1 24 115/208-230 Man. 4.0 1.15 11.22 S, MX
1/2 1800 S56 102908.00 √ 652 A4C17FH29 25 115/208-230 Auto. 4.0 1.15 10.69 S, MX
1/2 1800 56 113766.00 √ 734 M6K17FB34 33 115/208-230 Man. 2.5 1.15 11.49 S, US, 53
Severe Duty
1/2 1200 56 110011.00 √ 1,044 C6C11FB2 41 115/208-230 None 4.7 1.00 12.98 S, US
Motors
Green items are Premium Efficient. Continued on next page.
C/A - Check availability.
Note listing on inside back flap.
Specifications are subject to change without notice.
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
Single Phase
ODP Motors
3/4 3600 56 110276.00 √ 528 C6C34FB15 29 115/208-230 None 5.0 1.15 11.48 S, US
3/4 3600 56 110108.00 √ 562 M6C34FB7 29 115/208-230 Man. 5.0 1.15 11.48 S, US
3/4 3600 56 LM24744 √ 584 SRF2S0.75T1C6028TP1 26 115/208-230 Man. 5.3 1.15 12.32 S, MX
3/4 1800 56 110013.00 √ 652 C6C17FB2 32 115/208-230 None 5.4 1.15 11.48 S, US
3/4 1800 56 LM24607 C/A 682 SRF4S0.75T1C6028 29 115/208-230 None 5.5 1.15 12.32 S, MX
3/4 1800 56 110022.00 √ 762 M6C17FB7 32 115/208-230 Man. 5.4 1.15 11.48 S, US
3/4 1800 56 110017.00 √ 796 A6C17FB4 29 115/208-230 Auto. 5.4 1.15 11.48 S, US
TEFC Motors
Single Phase
3/4 1800 56 113767.00 √ 866 M6K17FB35 38 115/208-230 Man. 3.2 1.15 11.99 S, US, 53
3/4 1200 56H 110400.00 √ 1,208 C6K11FB1 46 115/208-230 None 5.3 1.00 13.48 S, US, 53
3/4 1200 56 LM24497 √ 1,266 SRF6S0.75T1B6028 39 115/208-230 None 5.7 1.15 13.82 S, MX, 53
1 3600 56 110059.00 √ 614 C6C34FB5 31 115/208-230 None 6.0 1.15 11.98 S, US
1 3600 56 110142.00 √ 686 M6C34FB2 31 115/208-230 Man. 6.0 1.15 11.98 S, US
1 3600 56 LM24745 √ 722 SRF2S1T1C6028TP1 31 115/208-230 Man. 6.2 1.15 12.32 S, MX
1 1800 56H 110209.00 √ 749 C6C17FB17 33 115/208-230 None 7.0 1.15 11.98 S, US
ODP Motors
Three Phase
1 1200 145T 120043.00 √ 1,384 C145K11FB1 52 115/208-230 None 6.4 1.00 14.43 S, US, 53
Three Phase
1 1/2 3600 56 110094.00 √ 806 C6C34FB6 34 115/208-230 None 8.5 1.00 12.48 S, US
1 1/2 3600 56H LM24531 √ 842 SRF2S1.5T1B6028 35 115/208-230 None 7.1 1.15 12.82 S, MX, 53
1 1/2 3600 56 110109.00 √ 945 M6C34FB8 34 115/208-230 Man. 8.5 1.00 12.48 S, US
1 1/2 3600 56H LM24532 √ 1,072 SRF2S1.51B6028TP1 35 115/208-230 Man. 7.1 1.15 12.82 S, MX, 53
1 1/2 3600 143T 120130.00 √ 806 C143C34FB1 39 115/208-230 None 8.5 1.00 13.43 S, US
1 1/2 3600 143T LM24710 C/A 842 SRF4S1.5T1B6028 34 115/208-230 None 7.1 1.15 12.87 S, MX, 53
1 1/2 1800 56H 110253.00 √ 851 C6K17FB9 41 115/208-230 None 8.6 1.00 12.98 S, US, 53
Inverter Duty
1 1/2 1800 56H LM24513 √ 890 SSF4S1.5T1B6028 40 115/208-230 None 7.6 1.15 13.82 S, MX, 53
Motors
1 1/2 1800 56H 113333.00 √ 976 M6K17FB32 41 115/208-230 Man. 8.6 1.00 12.99 S, US, 53
1 1/2 1800 56H LM24515 C/A 1,022 SRF3S1.5T1B6028TP1 41 115/208-230 Man. 7.6 1.15 13.82 S, MX, 53
1 1/2 1800 56H 110019.00 √ 1,059 U6K17FB1 41 115/208-230 Auto. 8.6 1.00 12.99 S, US, 53
1 1/2 1800 56H 113769.00 √ 1,128 M6K17FB37 46 115/208-230 Man. 6.5 1.15 13.49 S, US, 53
1 1/2 1800 145T 120026.00 √ 851 C145K17FB3 42 115/208-230 None 8.6 1.00 13.43 S, US, 53
1 1/2 1800 145T LM24711 C/A 890 SSF4S1.5T1B6028 42 115/208-230 None 7.6 1.15 13.87 S, MX, 53
Severe Duty
1 1/2 1800 145T 120009.00 √ 976 M145K17FB2 45 115/208-230 Man. 8.6 1.00 12.93 S, US, 53
Motors
1 1/2 1800 145T LM24746 C/A 1,022 SSF4S1.5T1B6028TP1 43 115/208-230 Man. 7.6 1.15 13.87 S, MX, 53
1 1/2 1200 184T 131526.00 √ 2,244 C184C11FB2 75 115/208-230 None 11.0 1.00 15.46 S, MX
Tech Information
Capacitor Start – General Purpose
Stock
RPM NEMA® Catalog List Wgt. load Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Factor (Inches) Notes
Single Phase
ODP Motors
2 3600 56H 110352.00 √ 1,052 C6C34FB21 44 115/208-230 None 10.0 1.00 13.48 S, US
2 3600 56H 110402.00 √ 1,101 P6C34FB23 44 115/208-230 Man. 10.0 1.00 13.48 S, US
2 3600 145T 120036.00 √ 1,059 C145C34FB1 45 115/208-230 None 10.0 1.00 13.93 S, US
2 3600 145T LM24712 C/A 1,099 SRF2ST1B6028 43 115/208-230 None 9.0 1.15 13.37 S, MX, 53
2 3600 145T 120395.00 √ 1,114 P145C34FB5 47 115/208-230 Man. 10.0 1.00 13.93 S, US
2 1800 56HZ 113770.00 √ 1,552 M6K17FB38 52 230 Man. 8.2 1.15 14.43 S, US, 3, 53
2 1800 145T 121507.00 √ 1,389 C145K17FB24 45 115/208-230 None 9.2 1.15 13.93 S, US, 53
TEFC Motors
Single Phase
2 1800 145T 120867.00 √ 1,401 P145K17FB22 45 115/208-230 Man. 9.2 1.00 13.93 S, US, 53
2 1800 182T 131509.00 √ 1,219 C182C17FB11 68 115/208-230 None 12.4 1.00 14.46 S, MX
2 1800 182T LM24713 √ 1,260 SS18F4S21B028 64 115/208-230 None 12.4 1.15 14.46 S, MX, 53
2 1200 215T 140747.00 C/A 3,326 C215K11FB3 118 115/208-230 None 11.2 1.15 18.71 S, MX, 53
3 3600 56H 116705.00 √ 1,148 P6K34FB31 53 230 Man. 13.0 1.00 13.99 S, US, 53
3 3600 145T 120341.00 √ 1,143 C145K34FB3 49 230 None 13.0 1.00 14.43 S, US, 53
3 3600 145T LM24714 √ 1,184 SS14F2S3T1B6008 51 208-230 None 11.8 1.15 14.87 S, MX, 53
ODP Motors
Three Phase
3 3600 182T 131637.00 √ 1,258 C182K34FB2 81 115/208-230 None 13.4 1.15 14.96 S, MX, 53
3 1800 184T 131533.00 √ 1,438 C184C17FB12 86 115/208-230 None 16.8 1.00 16.46 S, MX
3 1800 184T LM24716 C/A 1,474 SS184F4S3T1C6028 89 115/208-230 None 16.8 1.00 16.46 S, MX
3 1800 184T 131855.00 √ 1,552 P184K17FB26 88 208-230 Man. 13.6 1.15 14.96 S, MX, 53
5 3600 184T 131549.00 √ 1,738 C184K34FB6 96 230 None 19.8 1.15 16.96 S, MX, 53
5 3600 184T 132042.00 √ 1,940 P184K34FB9 103 230 Man. 19.8 1.15 16.96 S, MX, 53
5 1800 184T 131538.00 √ 1,748 C184K17FB15 98 230 None 23.0 1.00 17.46 S, MX, 53
TEFC Motors
5 1800 184T LM24718 C/A 1,759 SSF4S5T1B6008 89 230 None 21.7 1.00 17.46 S, MX, 53
Three Phase
5 1800 184T 131856.00 √ 1,805 P184K17FB25 85 208-230 Man. 21.0 1.00 15.96 S, MX, 53
7 1/2 3600 213T 140684.00 √ 2,234 C213K34FB1 113 208-230 None 32.0 1.00 18.34 S, MX, 53
7 1/2 3600 213T LM24719 √ 2,408 DDF2S7.51B6008 110 208-230 None 32.0 1.00 18.73 S, MX, 53
7 1/2 1800 215T 140120.00 D 2,267 N215K17FB1 172 230 None 33.6 1.15 20.21 S, MX, 53
7 1/2 1800 215T 141428.00 √ 2,267 N215K17FB80 172 230 None 30.5 1.15 21.09 S, MX, 53
7 1/2 1800 215T LM24720 √ 2,323 SS215F4S7.5T1B6008 170 208-230 None 30.0 1.00 21.09 S, MX, 53
10 3600 215T 140685.00 √ 2,742 C215K34FB1 145 208-230 None 41.5 1.00 19.84 S, MX, 53
Inverter Duty
10 3600 215T LM24721 √ 2,954 SSF2S10T1B6008 152 208-230 None 41.5 1.00 20.23 S, MX, 53
Motors
10 1800 215T 140581.00 √ 2,602 C215K17FB12 212 230 None 40.0 1.15 20.71 S, MX, 53
10 1800 215T LM24722 √ 3,016 SSF4S10T1B66 128 230 None 41.5 1.00 21.09 S, MX, 53
15 1800 256TZ 851150.00 √ 3,610 C256K17FB1 308 208-230 None 58.0 1.00 28.65 S, MX
Green items are Premium Efficient. Note listing on inside back flap.
C/A - Check Availability. Specifications are subject to change without notice.
Note - 256TZ frame size has a shaft dimension 1 inch longer than NEMA®.
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
Single Phase
ODP Motors
1/6 1800 48CZ 102661.00 √ 433 C4C17FC25 15 115/208-230 None 2.0 1.15 9.19 S, MX, 25
1/4 1800 48CZ 101765.00 √ 493 C4C17FC10 17 115/208-230 None 2.7 1.15 9.19 S, MX, 25
1/4 1800 S56C 102868.00 √ 491 C4C17NC26 20 115/208-230 None 2.3 1.15 9.80 S, MX, 25
1/4 1800 S56C LM24733 √ 469 SRN4S0.25TLCN1C6028 18 115/208-230 None 2.0 1.00 9.94 S, MX, 12
1/4 1800 S56C 102866.00 √ 491 C4C17FC34 16 115/208-230 None 2.7 1.15 9.44 S, MX
1/3 3600 S56C 102870.00 √ 420 C4C34FC13 20 115/208-230 None 2.8 1.15 9.44 S, MX
1/3 3600 S56C 102873.00 √ 457 C4C34NC15 19 115/208-230 None 1.9 1.00 9.30 S, MX
TEFC Motors
Single Phase
1/3 3600 S56C LM24734 √ 467 SRN2S0.33TLCN1C6028 20 115/208-230 None 2.2 1.15 10.19 S, MX
1/3 1800 48CZ 102663.00 √ 509 C4C17FC26 22 115/208-230 None 3.3 1.15 9.69 S, MX
1/3 1800 S56C 101766.00 √ 532 C4C17FC9 16 115/208-230 None 3.3 1.15 9.94 S, MX, 25
1/3 1800 S56C 102867.00 √ 528 C4C17NC25 21 115/208-230 None 2.6 1.15 10.30 S, MX
1/3 1800 S56C LM24598 √ 509 SRF4S0.33TLCN1C6028 18 115/208-230 None 3.0 1.15 10.44 S, MX, 12
1/3 1800 S56C 102869.00 √ 555 M4C17NC27 21 115/208-230 Man. 2.6 1.15 10.30 S, MX
1/3 1200 56C LM24735 C/A 779 SRF6S0.33TLCN1C6028 28 115/208-230 None 3.9 1.15 12.32 S, MX, 12
ODP Motors
Three Phase
1/2 3600 S56C 102864.00 √ 473 C4C34FC12 20 115/208-230 None 3.5 1.15 9.94 S, MX
1/2 3600 56C LM24736 C/A 532 SRF2S0.5TLCN1C6028 23 115/208-230 None 4.2 1.15 11.82 S, MX
1/2 3600 S56C 102872.00 √ 503 M4C34FC14 19 115/208-230 Man. 3.5 1.15 9.94 S, MX
1/2 1800 48CZ 102665.00 C/A 644 C4C17FC27 25 115/208-230 None 4.0 1.15 10.44 S, MX
1/2 1800 S56C 102862.00 √ 609 C4C17FC32 21 115/208-230 None 4.0 1.15 10.69 S, MX, 25
1/2 1800 56C LM24599 √ 606 SRF4S0.5TLCN1C6028 23 115/208-230 None 4.0 1.15 11.19 S, MX
1/2 1800 S56C 102865.00 √ 645 M4C17FC33 21 115/208-230 Man. 4.0 1.15 10.69 S, MX
TEFC Motors
1/2 1800 S56C 102871.00 √ 635 A4C17FC35 25 115/208-230 Auto. 4.0 1.15 10.69 S, MX
Three Phase
1/2 1200 56C 110411.00 √ 1,073 C6C11FC1 40 115/208-230 None 4.7 1.00 12.98 S, MX
3/4 3600 56C 110413.00 √ 555 C6C34FC8 29 115/208-230 None 5.0 1.15 11.48 S, US
3/4 3600 56C LM24738 C/A 555 SRF2S0.75TLCN1C5028 30 115/208-230 None 5.3 1.15 12.32 S, US
3/4 3600 56C 110412.00 √ 577 M6C34FC7 31 115/208-230 Man. 5.0 1.15 11.49 S, MX
3/4 1800 56C 110057.00 √ 724 C6C17FC6 28 115/208-230 None 5.4 1.15 11.48 S, US
3/4 1800 56C LM24613 √ 646 SRF4S0.75TLCN1C6028 30 115/208-230 None 5.5 1.15 12.32 S, US
3/4 1800 56C 110040.00 √ 764 M6C17FC2 29 115/208-230 Man. 5.4 1.15 11.49 S, MX
Inverter Duty
3/4 1800 56C 110308.00 √ 753 A6C17FC8 31 115/208-230 Auto. 5.4 1.15 11.46 S, US
Motors
3/4 1200 56C 110414.00 √ 1,208 C6K11FC2 45 115/208-230 None 5.3 1.00 13.49 S, US
3/4 1200 56C LM24739 C/A 878 SRF60.75TLCN1B6028 38 115/208-230 None 5.7 1.15 13.82 S, US, 53
Tech Information
Totally Enclosed - Capacitor Start - General Purpose
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
Single Phase
ODP Motors
1 3600 56C 110416.00 √ 650 C6C34FC10 30 115/208-230 None 6.0 1.15 11.98 S, US
1 3600 56C LM24740 √ 659 SRF2S1TLCN1C6028 31 115/208-230 None 6.2 1.15 12.32 S, MX
1 3600 56C 110415.00 √ 714 M6C34FC9 31 115/208-230 Man. 6.0 1.15 11.99 S, US
1 1800 56C 110058.00 √ 833 C6C17FC7 36 115/208-230 None 6.4 1.15 11.98 S, US
1 1800 56C LM24614 √ 689 SRF4S1TLCN1C6028 31 115/208-230 None 6.7 1.15 12.82 S, MX
1 1800 56C 110041.00 √ 870 M6C17FC3 32 115/208-230 Man. 6.4 1.15 11.98 S, US
1 1800 143TC 121001.00 √ 946 C143C17FC2 35 115/208-230 None 6.4 1.15 12.42 S, US
TEFC Motors
Single Phase
1 1/2 3600 56C 110419.00 √ 836 C6C34FC12 34 115/208-230 None 8.5 1.00 12.48 S, US
1 1/2 3600 56C LM24535 C/A 722 SRF2S1.5TLCN1B6028 33 115/208-230 None 7.1 1.15 12.82 S, MX, 53
1 1/2 3600 56C 110418.00 √ 876 M6C34FC11 34 115/208-230 Man. 8.5 1.00 12.49 S, US
1 1/2 3600 143TC 120101.00 √ 946 C143C34FC1 39 115/208-230 None 8.5 1.00 12.92 S, US
1 1/2 1800 56C 110420.00 √ 939 C6K17FC2 39 115/208-230 None 8.6 1.00 12.99 S, US, 53
1 1/2 1800 56C LM24622 √ 731 SRF4S1.5TLCN1B6028 40 115/208-230 None 7.6 1.15 13.82 S, MX, 53
1 1/2 1800 56C 110042.00 √ 980 M6K17FC1 43 115/208-230 Man. 8.6 1.00 12.99 S, US
ODP Motors
Three Phase
1 1/2 1800 145TC 120017.00 √ 1,070 C145K17FC3 43 115/208-230 None 8.6 1.00 13.43 S, US, 53
2 3600 56C 110422.00 √ 1,063 C6C34FC14 43 115/208-230 None 10.0 1.00 13.48 S, US
2 3600 56C LM24530 √ 823 SRF2S2TLCNB6038 39 115/208-230 None 9.0 1.15 13.32 S, MX, 53
2 3600 56C 110421.00 √ 1,101 P6C34FC13 44 115/208-230 Man. 10.0 1.00 13.49 S, US
2 3600 145TC 120102.00 √ 1,102 C145C34FC2 46 115/208-230 None 10.0 1.00 13.92 S, US
2 1800 56C 112136.00 √ 1,258 C6K17FC9 44 115/208-230 None 9.2 1.00 13.49 S, US, 53
2 1800 145TC 120060.00 √ 1,287 P145K17FC2 45 115/230 Man. 9.2 1.00 14.43 S, US, 53
TEFC Motors
2 1800 182TC 131516.00 C/A 1,675 C182C17FC3 67 115/208-230 None 12.4 1.00 14.44 S, MX
Three Phase
3 3600 145TC 120824.00 √ 1,235 P145K34FC6 56 230 Man. 13.0 1.00 14.43 S, US, 53
3 1800 184TC 131545.00 √ 1,975 C184C17FC4 85 115/208-230 None 16.8 1.00 16.47 S, MX
5 3600 184TC 131778.00 √ 1,981 C184K34FC2 84 230 None 19.8 1.15 16.97 S, MX, 53
5 1800 184TC 131540.00 √ 2,056 C184K17FC6 107 230 None 23.0 1.00 17.47 S, MX, 53
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/4 1800 S56C 102916.00 √ 501 C4C17FK4 18 115/208-230 None 2.7 1.15 9.69 S, MX
1/4 1800 S56C LM24723 √ 573 SRF4S0.25TLC6028 18 115/208-230 None 2.0 1.15 10.19 S, MX
1/3 3600 S56C 102929.00 √ 498 C4C34FK16 17 115/208-230 None 2.8 1.15 9.69 S, MX
TEFC Motors
Single Phase
1/3 1800 S56C 102930.00 √ 533 C4C17FK6 21 115/208-230 None 3.1 1.15 10.44 S, MX
1/3 1800 S56C LM24600 √ 556 SRF4S0.33TLC1C6028 19 115/208-230 None 3.0 1.15 10.44 S, MX
1/3 1800 S56C 103082.00 √ 533 M4C17FK7 24 115/208-230 Man. 3.1 1.15 10.44 S, MX
1/3 1800 S56C 102910.00 √ 533 C4C17NK2 23 115/208-230 None 2.6 1.15 10.31 S, MX
1/2 3600 S56C 102903.00 √ 499 C4C34FK17 21 115/208-230 None 3.5 1.15 9.94 S, MX
1/2 3600 56C LM24725 √ 528 SRF2S0.5TLC1C6028 23 115/208-230 None 4.2 1.15 11.82 S, MX
1/2 1800 S56C 102907.00 √ 641 C4C17FK5 25 115/208-230 None 4.0 1.15 10.69 S, MX
1/2 1800 S56C LM24628 √ 676 SRF4S0.5TLC6028 24 115/208-230 None 4.0 1.15 11.19 S, MX
ODP Motors
Three Phase
1/2 1800 S56C 103085.00 √ 641 M4C17FK8 22 115/208-230 Man. 4.0 1.15 10.69 S, MX
3/4 3600 56C 112135.00 √ 570 C6C34FK36 29 115/208-230 None 5.0 1.15 11.48 S, US
3/4 3600 56C LM24726 √ 643 SRF2S0.75TLC1C6028 30 115/208-230 None 5.3 1.15 12.32 S, MX
3/4 1800 56C 110905.00 √ 772 C6C17FK4 29 115/208-230 None 5.4 1.15 11.48 S, US
3/4 1800 56C LM24615 C/A 880 SRF2S0.75TLC1C6028 30 115/208-230 None 5.5 1.15 12.32 S, MX
3/4 1800 56C 116922.00 √ 772 M6C17FK86 26 115/208-230 Man. 5.4 1.15 11.48 S, US
1 3600 56C 110180.00 √ 654 C6C34FK1 31 115/208-230 None 6.0 1.15 11.98 S, US
TEFC Motors
Three Phase
1 3600 56C LM24727 √ 683 SRF2S1TLC1C6028 31 115/208-230 None 6.2 1.15 12.32 S, MX
1 3600 56C 115877.00 √ 654 M6C34FK78 30 115/208-230 Man. 6.0 1.15 11.98 S, US
1 1800 56C 110908.00 √ 874 C6C17FK5 33 115/208-230 None 6.4 1.15 11.98 S, US
1 1800 56C LM24616 √ 992 SRF4S1TLC6028 33 115/208-230 None 6.7 1.15 12.82 S, MX
1 1800 56C 115879.00 √ 874 M6C17FK80 32 115/208-230 Man. 6.4 1.15 11.98 S, US
1 1800 143TC 121680.00 √ 874 C143C17FK1 32 115/208-230 None 6.4 1.15 13.43 S, US
1 1/2 3600 56C 110909.00 √ 849 C6C34FK19 37 115/208-230 None 8.5 1.00 12.48 S, US
Inverter Duty
1 1/2 3600 56HC LM24539 √ 889 SRF2S1.5TLC1B6028 33 115/208-230 None 7.1 1.15 12.82 S, MX
Motors
1 1/2 3600 56C 115024.00 √ 892 M6K34FK16 38 115/208-230 Man. 6.2 1.15 12.49 S, US
1 1/2 1800 56HC 110910.00 √ 1,039 C6K17FK2 42 115/208-230 None 8.6 1.00 12.98 S, US
1 1/2 1800 56HC LM24728 √ 1,081 SRF2S1.5TLC1B6028 40 115/208-230 None 7.6 1.15 13.82 S, MX
1 1/2 1800 56HC 116703.00 √ 1,044 M6K17FK50 39 115/208-230 Man. 8.6 1.15 13.37 S, US
1 1/2 1800 145TC 121681.00 √ 1,039 C145K17FK13 40 115/208-230 None 8.6 1.00 13.43 S, US
Tech Information
Totally Enclosed - Capacitor Start - General Purpose
Stock
RPM NEMA® Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
Single Phase
ODP Motors
2 3600 56HC 113931.00 √ 1,113 C6C34FK52 45 115/208-230 None 10.0 1.00 13.48 S, US
2 3600 56HC LM24729 √ 1,164 SRF2S2TLC1B6028 39 115/208-230 None 9.0 1.15 13.32 S, MX, 53
2 3600 56HC 114995.00 √ 1,060 P6K34FK15 45 115/230 Man. 8.5 1.15 12.84 S, US, 53
2 3600 56HC 115878.00 C/A 1,113 P6C34FK79 46 115/208-230 Man. 10.0 1.00 13.49 S, US
2 3600 145TC 121008.00 √ 1,113 C145C34FK2 46 115/208-230 None 10.0 1.00 13.93 S, US
2 1800 145TC 120274.00 √ 1,401 C145K17FK2 46 115/208-230 None 9.2 1.00 14.43 S, US, 53
2 1800 145TC LM24731 C/A 1,467 SSF4S2TLC1B6028 52 115/230 None 9.5 1.15 14.87 S, MX, 53
TEFC Motors
Single Phase
2 1800 145TC 121465.00 √ 1,401 P145K17FK10 46 115/208-230 Man. 9.2 1.00 13.93 S, US, 53
3 3600 145TC 121825.00 √ 1,174 C145K34FK9 47 230 None 13.0 1.00 14.43 S, US, 53
3 3600 56HC 115048.00 √ 1,160 P6K34FK17 49 208-230 Man. 13.0 1.00 13.98 S, US, 53
3 3600 145TC 121060.00 √ 1,246 P145K34FK4 54 230 Man. 13.0 1.00 14.43 S, US, 53
3 1800 184TC 131631.00 √ 1,979 P184C17FK9 87 115/208-230 Man. 16.8 1.00 16.47 S, MX
3 1800 184TC 131857.00 √ 1,979 P184K17FK14 107 230 Man. 12.8 1.15 14.97 S, MX, 53
5 3600 184TC 131632.00 √ 1,989 P184K34FK2 106 230 Man. 19.8 1.15 16.97 S, MX, 53
ODP Motors
Three Phase
5 1800 184TC 131633.00 √ 2,071 P184K17FK11 107 230 Man. 23.0 1.00 17.47 S, MX, 53
7 1/2 3600 213TC 140694.00 √ 2,335 C213K34FK1 150 208-230 None 32.0 1.00 19.07 S, MX, 53
7 1/2 1800 215TC 140807.00 D 2,384 C215K17FK6 171 230 None 33.6 1.15 20.21 S, MX, 53
7 1/2 1800 215TC 141429.00 √ 2,384 C215K17FK18 171 230 None 30.5 1.15 21.09 S, MX, 53
10 3600 215TC 140695.00 √ 2,784 C215K34FK1 152 208-230 None 41.5 1.00 20.57 S, MX, 53
10 1800 215TC 140678.00 √ 2,698 C215K17FK4 159 230 None 40.0 1.15 20.71 S, MX, 53
C/A - Check Availability Note listing on inside back flap
TEFC Motors
Specifications are subject to change without notice
Three Phase
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Features:
• High starting torque
• Capacitor start / capacitor run designs for higher efficiency
• Reduced running amps
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Factor F.L.Eff. (Inches) Notes
1/3 1800 56 113765.00 √ 661 M6K17FB33 26 115/208-230 Man. 1.7 1.15 76 10.99 S, US
1/2 1800 56 113766.00 √ 734 M6K17FB34 33 115/208-230 Man. 2.5 1.15 78 11.49 S, US
3/4 1800 56 113767.00 √ 866 M6K17FB35 38 115/208-230 Man. 3.2 1.15 82 11.99 S, US
1 1800 56 113768.00 √ 992 M6K17FB36 36 115/208-230 Man. 4.2 1.15 83 12.49 S, US
1 1800 56H 113769.00 √ 1,128 M6K17FB37 46 115/208-230 Man. 6.5 1.15 84 13.49 S, US
2 1800 56HZ 113770.00 √ 1,552 M6K17FB38 52 230 Man. 8.2 1.15 85 14.43 S, US
ODP Motors
Three Phase
Green items are Premium Efficient. Note listing on inside back flap.
Specifications are subject to change without notice.
TEFC Motors
Three Phase
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
Motors
1/6 3600 42 092011.00 C/A 457 C42C34NB1 16 115/208-230 None 1.3 1.00 9.56 S, US
1/6 1800 42 092012.00 C/A 445 C42C17NB1 21 115/208-230 None 1.8 1.00 10.31 S, US
1/4 3600 42 092013.00 C/A 451 C42C34NB2 21 115/208-230 None 1.7 1.00 10.56 S, US
1/4 1800 48 100361.00 √ 433 C4C17NB4 17 115/208-230 None 2.3 1.15 9.43 S, MX
1/4 1800 S56 102914.00 √ 437 C4C17NH9 24 115/208-230 None 2.3 1.15 9.81 S, MX
1/4 1800 S56 102915.00 √ 536 A4C17NH10 23 115/208-230 Auto. 2.3 1.15 9.81 S, MX
1/3 3600 48 100362.00 √ 415 C4C34NB2 24 115/208-230 None 2.0 1.00 9.93 S, MX
Severe Duty
1/3 1800 S56 102912.00 √ 479 C4C17NH7 25 115/208-230 None 2.6 1.15 10.31 S, MX
Motors
1/3 1800 S56 102913.00 C/A 548 M4C17NH8 25 115/208-230 Man. 2.6 1.15 10.31 S, MX
1/3 1800 S56 102911.00 √ 543 A4C17NH6 24 115/208-230 Auto. 2.6 1.15 10.31 S, MX
1/2 3600 48 100366.00 √ 477 C4C34NB3 27 115/208-230 None 2.9 1.00 10.43 S, MX
Tech Information
Pump Motors & Resilient Base Motors
General Specifications:
Motors specially suited for hot or cold pressure washer applications and other
single phase installations requiring minimum starting and running amperages.
Single Phase
ODP Motors
Mechanical Features: Electrical Features:
• Double shielded ball bearings • Windings dipped in heavy duty varnish system
• Dynamically balanced rotors • Capacitor start / capacitor run designs to reduce amp draw
• Manual reset overload protection
TEFC Motors
Single Phase
Single Phase - TEFC - Rigid Base
SYN App. Over- F. L. “C”
Stock
ODP Motors
Three Phase
1 1800 56 110023.00 √ 862 M6C17FB8 32 115/208-230 Man. 6.4 1.15 11.98 S, US
1 1800 143T 120008.00 √ 936 M143C17FB2 34 115/208-230 Man. 6.4 1.15 12.93 S, US
1 1/2 3600 56 110109.00 √ 945 M6C34FB8 34 115/208-230 Man. 8.5 1.00 12.48 S, US
1 1/2 1800 56H 113333.00 √ 976 M6K17FB32 41 115/208-230 Man. 8.6 1.00 12.99 S, US, 6, 53
1 1/2 1800 145T 120009.00 √ 976 M145K17FB2 45 115/208-230 Man. 8.6 1.00 12.93 S, US, 53
2 3600 56H 110402.00 √ 1,101 P6C34FB23 44 115/208-230 Man. 10.0 1.00 13.48 S, US, 6, 53
2 3600 145T 120395.00 √ 1,114 P145C34FB5 47 115/208-230 Man. 10.0 1.00 13.93 S, US
TEFC Motors
Three Phase
2 1800 145T 120867.00 √ 1,401 P145K17FB22 45 115/208-230 Man. 9.2 1.00 13.93 S, US, 53
3 3600 56H 116705.00 √ 1,148 P6K34FB31 53 230 Man. 13.0 1.00 13.99 S, US, 6, 53
3 1800 184T 131855.00 √ 1,552 P184K17FB26 88 208-230 Man. 13.6 1.15 14.96 S, MX, 53
5 3600 184T 132042.00 √ 1,940 P184K34FB9 103 230 Man. 19.8 1.15 16.96 S, MX, 53
5 1800 184T 131856.00 √ 1,805 P184K17FB25 85 208-230 Man. 21.0 1.00 15.96 S, MX, 53
Inverter Duty
Motors
Resilient Base Motors - Single Phase - General Purpose or Fan Duty
General Specifications:
• Industrial quality resilient base
• Moderate starting torque
Severe Duty
Motors
• Belt driven fans or fan on shaft applications
• Capacitor start designs
Explosion Proof
1/2 1725 56 110025.00 √ 666 A6C17FR1 26 115/208-230 Auto. 4.4 1.15 11.96 S, US
3/4 1725 56 110026.00 √ 798 A6C17FR2 28 115/208-230 Auto. 5.4 1.15 12.46 S, US, 6
1 1725 56H 111915.00 √ 908 A6C17FR10 31 115/208-230 Auto. 6.4 1.15 12.96 S, US, 6
Application:
Motors specially suited for hot or cold pressure washer applications
and other single phase installations requiring minimum starting and
running amperages.
Single Phase
ODP Motors
3/4 1800 56C 116487.00 √ 1,040 M6C17FK79 30 115/208-230 Man. 5.4 1.15 11.49 S, US, 57
1 3600 56C 115877.00 √ 654 M6C34FK78 28 115/208-230 Man. 6.0 1.15 11.98 S, US
1 1800 56C 115879.00 √ 874 M6C17FK80 32 115/208-230 Man. 6.4 1.15 11.98 S, US
1 1⁄2 3600 56C 115024.00 √ 892 M6K34FK16 35 115/208-230 Man. 6.2 1.15 12.49 S, US, 53
1 1⁄2 1800 56HC 116703.00 √ 1,044 M6K17FK50 39 115/208-230 Man. 8.6 1.15 13.37 S, US, 53
2 3600 56HC 114995.00 √ 1,060 P6K34FK15 42 115/230 Man. 8.5 1.15 12.84 S, US, 53
2 1800 145TC 121465.00 √ 1,401 P145K17FK10 44 115/208-230 Man. 9.2 1.00 13.93 S, US, 53
TEFC Motors
Three Phase
3 3600 56HC 115048.00 √ 1,160 P6K34FK17 53 208-230 Man. 13.0 1.00 13.98 S, US, 53
3 1800 184TC 131857.00 √ 1,979 P14K17FK14 104 230 Man. 12.8 1.15 14.97 S, MX, 53
5 3600 184TC 131632.00 √ 1,989 P184K34FK2 106 230 Man. 19.8 1.15 16.97 S, MX, 53
5 1800 184TC 131633.00 √ 2,071 P184K17FK11 107 230 Man. 23.0 1.00 17.47 S, MX, 53
C/A - Check Availability. Note listing on inside back flap.
Specifications are subject to change without notice.
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Tech Information
Unit Handling Motors
Applications:
Unit and baggage handling, conveyors, packaging equipment, machine
tools, elevators and door openers where a conduit box at 12:00 position is
needed due to mounting size restrictions
Single Phase
ODP Motors
Features:
• Low profile conduit box at the 12:00 position
• Base includes both 56H and 143-5T mounting holes and slots
TEFC Motors
Single Phase
Single Phase - TEFC - C Face With Base
SYN App. F. L. “C”
Stock
ODP Motors
Three Phase
1 1800 56C 117703.00 √ 755 C6C17FK93 32 115/208-230 6.4 1.15 12.48 S, US
TEFC Motors
Three Phase
Stock
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Regal has launched new and improved design for the Globetrotter series of motors.
For reliable performance in heavy-duty industrial applications, nothing beats the LEESON®
heavyweight motors. With their cast iron construction and 1.15 service factor, they are ideal for
“tough to handle” applications.
The redesigned, totally enclosed cast iron Globetrotter motors now include:
Single Phase
ODP Motors
• IP55 protection
• Division 2/ Zone 2, Class I (gases), Groups A, B, C, D
• Dual frame mounting holes
• F1 to F2 mounting capability
• Dual branded nameplate displaying both the LEESON and Marathon® logos
TEFC Motors
Single Phase
Steel fan cover for Heavy duty cast iron frame Cast iron endplates for
optimum strength
ODP Motors
Three Phase
V-ring seal
on drive end
Inner bearing cap
TEFC Motors
Three Phase
Inverter Duty
Motors
Non-sparking
external cooling fan
Severe Duty
Motors
Tech Information
General Purpose Motors
The WATTSaver® e line of premium efficiency motors Cast iron 170 series motors can be field modified for forced
is Regal’s unique IRIS® inverter rated insulation system ventilation service to extend the inverter-fed operating
which is voltage spike resistant, included at no extra cost. range and an encoder package is stocked for closed-loop
Single Phase
ODP Motors
These motors meet or exceed most utility rebate programs vector inverter systems. These motors can be converted
and the EPAct federally mandated efficiency levels. The to IEEE841 compliant using the Custom PDQ Program.
efficiency ratings have been verified to IEEE 112B test Contact your local sales representative.
standards by Regal’s NVLAP-Certified lab.
TEFC Motors
Single Phase
Efficiencies meet or exceed NEMA® Premium the stainless steel nameplate for your convenience
on all WATTSaver e motors. in calculating realistic energy savings. Unique serial
Rugged cast iron construction on number identifies each motor and is stamped
three phase, 1-350 HP models. These clearly on the metal nameplate.
motors share features with normal
efficiency 150 Series motors detailed Independently verified
on page 38. Add an optional cast iron efficiencies by the Canadian
fan guard for severe duty applications. Standards Association, an
internationally recognized testing
laboratory. CSA report number
EEV78720-1.
ODP Motors
Three Phase
Premium efficiency
Three phase models suitable motors finished with
for inverter duty, as well as primer and chemical
both 50 Hz and 60 Hz operation. resistant green acrylic
matte enamel. IP43
enclosure protection.
TEFC Motors
Three Phase
Modification to meet IEEE 841
available through Custom PDQ.
Includes addition of watertight
Meets or exceeds the 1997 Inpro shaft seals, two-part epoxy
Inverter Duty
mandated efficiency standards finish, and plated hardware.
of the Energy Policy Act of 1992.
Motors
Also meets or exceeds efficiency
requirements of most electric
utility rebate programs.
Severe Duty
Second-generation, high temperature, spike-
Motors
resistant magnet wire for extended motor life. Stator
impregnated with extra-heavy varnish system. 1.15
Service Factor. All WATTSaver e motors have Class
F insulation with a Class B rise. Motors rated at 40
degrees C ambient.
IRIS® Inverter Rated Insulation System temperature varnish are just a few features
Explosion Proof
from Regal provides superior protection against contributing to extra protection. All this plus
voltage spikes induced by variable frequency second generation spike-resistant magnet wire.
Motors
drives. This protects better than spike-resistant In all Leeson stock NEMA three-phase motors,
UL and CSA Recognition magnet wire alone. Specially formed phase 1 HP and larger, the Inverter Rated Insulation
insulation, cushioned and sleeved connections System is standard at no extra cost the LEESON
(from the leads all the way into the turns), Ultimate E®, “199” series motors have our
and deep-penetrating, non-hygroscopic, high standard insulation system.
Duty Motors
Automotive
Applications:
For use where water and dust exposure is minimal. Ideally suited for use on pumps,
compressors, blowers, fans and other standard industrial applications.
Inverter Duty
Tech Information
Drip- Proof - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V. Eff. Factor (Inches) Notes
1/4 1800 S56 E100027.00 √ 491 C4T17DH45 20 230/460 1.0 69.5 1.35 10.74 S, MX
1/4 1800 48 LM34048 √ 508 SPD4B0.25T61 19 230/460 1.0 69.5 1.35 10.34 S, MX
1/3 3600 48 E101447.00 √ 503 C4T34DB7 40 230/460 1.4 69.5 1.35 10.51 S, US
1/3 1800 48 E100446.00 √ 528 C4T17DB17 22 230/460 1.2 73.4 1.35 11.12 S, MX
1/3 1800 S56 E103017.00 √ 535 C4T17DH39 22 230/460 1.2 73.4 1.25 11.49 S, MX, T
1/3 1800 S56 LM34049 √ 546 SRD4B0.33T61 23 230/460 1.2 73.4 1.35 11.22 S, MX
TEFC Motors
Single Phase
1/3 1200 56 E110425.00 √ 836 C6T11DH2 23 230/460 1.6 71.4 1.15 10.37 S, US, T
1/2 3600 S56 E101448.00 √ 541 C4T34DH7 30 230/460 1.8 73.4 1.25 10.89 S, US
1/2 1800 56 LM34050 √ 578 SRD4B0.5T61 30 230/460 1.7 78.2 1.25 11.32 S, MX
1/2 1800 56 E119351.00 √ 574 C6T17DB113 23 208-230/460 1.8 78.2 1.25 9.87 S, US, T
1/2 1200 56 E110027.00 √ 881 C6T11DB22 21 230/460 2.2 75.3 1.15 10.87 S, US, T
3/4 3600 S56 E101449.00 √ 552 C4T34DH8 20 230/460 2.4 76.8 1.25 9.74 S, US, T
3/4 1800 S56 LM34051 √ 592 SRD4B0.75T61 30 230/460 2.6 81.1 1.25 11.32 S, MX
3/4 1800 56 E116738.00 √ 581 C6T17DB95 27 208-230/460 2.5 81.5 1.25 10.87 S, US, T
ODP Motors
Three Phase
3/4 1200 56 E110028.00 √ 923 C6T11DB23 36 230/460 2.8 81.7 1.15 11.87 S, US, T
1 3600 56 116128.00 D 710 C6T34DB30 27 230/460 2.8 80.0 1.25 10.18 S, US, T
1 3600 56 E110426.00 √ 562 C6T34DB1 21 230/460 3.2 77.0 1.25 9.87 S, US, T
1 1800 56 LM34052 √ 690 SRD4B1T61 30 230/460 3.0 83.5 1.15 11.72 S, MX
1 1800 56HZ 115827.00 √ 549 C6T17DB77 27 208-230/460 4.2 78.5 1.15 11.19 S, US, 5
1 1800 56HZ E115827.00 √ 711 C6T17DB117 37 230/460 3.2 83.5 1.15 12.19 S, US, 5, T
1 1800 56 E116752.00 √ 797 C6T17DB92 35 230/460 3.2 83.5 1.25 12.12 S, US, T
TEFC Motors
Three Phase
1 1800 143T 121003.00 √ 797 C143T17DB10 40 208-230/460 3.2 85.5 1.25 12.19 S, US, T
1 1800 143T LM24871 √ 659 SSD4B1T61 35 230/460 3.0 85.5 1.25 11.99 S, MX
1 1200 145T 121517.00 √ 929 C145T11DB7 44 230/460 3.8 82.5 1.25 12.69 S, US, T
1 1⁄2 3600 56 E116753.00 √ 790 C6T34DB31 35 230/460 4.0 84.0 1.25 11.87 S, US, T
1 1⁄2 3600 143T 121514.00 √ 790 C143T34DB4 39 230/460 4.4 84.0 1.25 12.19 S, US, T
1 1⁄2 1800 56H LM34053 √ 844 SRD4B1.5T61 45 230/460 4.6 86.5 1.15 14.07 S, MX, 6
1 1⁄2 1800 56HZ 115825.00 √ 572 C6T17DB79 32 230/460 5.6 78.5 1.15 11.13 S, US, 5
Inverter Duty
1 1⁄2 1800 56HZ E115825.00 √ 832 C6T17DB114 42 230/460 4.8 86.5 1.15 13.19 S, US, 5, T
Motors
1 1⁄2 1800 56 E116754.00 √ 832 C6T17DB91 40 230/460 4.8 86.5 1.25 12.87 S, US, T
1 1⁄2 1800 145T 121004.00 √ 832 C145T17DB32 44 208-230/460 4.6 86.5 1.25 12.69 S, US, T
1 1⁄2 1800 145T LM24875 √ 688 SSD4B1.5T61 45 230/460 4.4 86.5 1.25 12.99 S, MX
1 1⁄2 1200 182T 131971.00 √ 1,094 C182T11DB9 70 230/460 6.2 86.5 1.15 13.19 S , MX, T
Green items are Premium Efficient. Continued on next page.
“E” prefix items comply with SMR 2015.
D - Item to be discontinued once inventory is depleted. Note listing on inside back flap.
Severe Duty
Note T - N/C T-stats Specifications are subject to change without notice.
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V. Eff. Factor (Inches) Notes
2 3600 56 E116755.00 √ 931 C6T34DB32 41 230/460 4.8 85.5 1.25 12.87 S, US, T
2 3600 145T 121515.00 √ 931 C145T34DB15 45 230/460 4.8 85.5 1.25 12.69 S, US, T
2 1800 56H LM34054 C/A 1,043 SRD4B2T61 46 230/460 6.0 86.5 1.15 13.44 S, MX, 47
2 1800 56HZ 115826.00 √ 630 C6T17DB78 36 230/460 6.2 78.5 1.15 11.63 S, US, 5
2 1800 56HZ E115826.00 √ 944 C6T17DB115 46 230/460 5.8 86.5 1.25 13.69 S, US, 5, T
2 1800 56H E111310.00 C/A 964 A6T17DB124 39 230/460 5.8 86.5 1.15 13.34 S, US, 6, 33
TEFC Motors
Single Phase
2 1800 56H E116756.00 √ 944 C6T17DB96 47 230/460 5.8 86.5 1.25 13.37 S, US, 6, T
2 1800 145T 121005.00 √ 944 C145T17DB33 48 208-230/460 5.8 86.5 1.25 13.69 S, US, T
2 1800 145T LM24169 √ 762 SSD4BT61 48 230/460 6.0 86.5 1.25 13.49 S, MX
2 1200 184T 131972.00 √ 1,111 C184T11DB9 81 230/460 6.8 87.5 1.15 14.19 S, MX, T
3 3600 56H E113293.00 √ 967 C6T34DB37 44 230/460 7.2 86.5 1.15 12.87 S, US, 6, T
3 3600 145T 121516.00 √ 943 C145T34DB16 46 230/460 7.2 86.5 1.25 12.69 S, US, T
3 3600 145T LM32731 √ 858 SSD2B3T61 42 230/460 7.2 85.5 1.25 12.70 S, US
3 1800 56HZ 116595.00 √ 753 C6T17DB90 47 208-230/460 8.6 82.5 1.15 13.13 S, US, 5
ODP Motors
Three Phase
3 1800 182T 131519.00 √ 965 C182T17DB37 77 208-230/460 8.0 89.5 1.25 13.19 S, MX, T
3 1800 182T LM24222 √ 992 SSD4B3T61 89 230/460 8.0 89.5 1.25 13.19 S, MX
3 1200 213T 171574.60 √ 1,485 C213T11DB2 156 208-230/460 10.2 88.5 1.15 16.38 C, CN, T
5 3600 184T 131986.00 √ 1,033 C184T34DB11 86 230/460 12.0 86.5 1.15 15.19 S, MX, T
5 1800 184T 131520.00 √ 1,087 C184T17DB44 95 230/460 12.6 89.5 1.25 14.19 S, MX, T
5 1800 184T LM24202 √ 1,114 SSD4BT61 89 230/460 12.6 89.5 1.25 14.19 S, MX
5 1200 215T 171575.60 √ 1,876 C215T11DB6 188 208-230/460 15.0 90.2 1.15 16.38 C, CN, T
TEFC Motors
Three Phase
7 1/2 3600 184T 131988.00 √ 1,493 C184T34DB12 106 230/460 17.6 88.5 1.15 16.19 S, MX, T
7 1/2 1800 213T 140470.00 √ 1,364 C213T17DB2 133 230/460 20.8 91.0 1.25 16.25 S, MX, T
7 1/2 1800 213T LM24194 √ 1,567 SSD4B7.5T61 158 230/460 19.2 91.0 1.25 18.54 S, US
7 1/2 1800 213T 170142.60 √ 1,489 C213T17DB44 163 208-230/460 20.6 91.0 1.15 16.38 C, CN, T
7 1/2 1200 254T 170145.60 √ 2,350 C254T11DB43 291 208-230/460 22.4 91.7 1.15 20.94 C, CN, T
10 3600 213T 140753.00 √ 1,573 C213T34DB4 160 230/460 23.4 89.5 1.15 17.30 S, MX, T
10 3600 213T LM32740 √ 1,662 SSD2B10T61 162 230/460 23.4 89.5 1.25 17.30 S, US, T
Inverter Duty
10 3600 213T 170143.60 √ 1,722 C213T34DB45 153 208-230/460 23.6 91.0 1.15 16.38 C, CN, T
Motors
10 1800 215T 140472.00 √ 1,612 C215T17DB15 144 230/460 26.8 91.7 1.25 17.25 S, MX, T
10 1800 215T LM24193 √ 1,752 SSDB10T61 156 230/460 25.0 91.7 1.25 18.54 S, US
10 1800 215T 170144.60 √ 1,757 C215T17DB49 203 208-230/460 25.6 91.7 1.15 17.87 C, CN, T
10 1200 256T 170146.60 √ 2,929 C256T11DB45 305 208-230/460 29.6 91.7 1.15 22.60 C, CN, T
15 3600 215T 140754.00 √ 2,090 C215T34DB4 170 230/460 35.0 91.0 1.15 18.55 S, MX, T
15 3600 215T LM32743 √ 2,221 SSD2B15T61 170 230/460 35.0 90.2 1.25 18.54 S, MX
Severe Duty
15 3600 215T 170064.60 √ 2,314 C215T34DB3 178 208-230/460 34.6 91.0 1.15 17.87 C, CN, T
Motors
15 1800 254T 170065.60 √ 2,339 C254T17DB9 289 208-230/460 37.0 93.0 1.15 20.94 C, CN, T
15 1800 254T LM24190 √ 2,613 CCD4B15T61 300 230/460 37.0 93.0 1.25 24.37 C, US
15 1200 284T 170067.60 √ 3,856 C284T11DB7 445 208-230/460 39.4 92.4 1.25 23.54 C, CN, T
20 3600 254T 170032.60 √ 2,906 C254T34DB5 285 208-230/460 46.0 93.0 1.15 20.94 C, CN, T
20 1800 256T 170006.60 √ 2,857 C256T17DB5 334 208-230/460 51.0 93.0 1.15 22.60 C, CN, T
20 1800 256T LM24199 √ 3,014 CCD4B20T61 350 230/460 48.0 93.0 1.25 24.37 C, US
Explosion Proof
20 1800 286T LM32746 √ 4,128 SSD4B20T61 233 230/460 48.0 93.0 1.25 25.18 S, US
20 1200 286T 170000.60 √ 4,761 C286T11DB1 467 208-230/460 55.0 92.4 1.15 25.00 C, CN, T
Motors
25 3600 256T 170034.60 √ 3,606 C256T34DB5 325 208-230/460 57.0 93.0 1.15 22.60 C, CN, T
25 1800 284T 170009.60 √ 3,606 C284T17DB7 414 208-230/460 59.6 93.6 1.15 23.54 C, CN, T
25 1800 284T LM29576 √ 3,899 CCD4B25T61Y 435 230/460 64.0 93.6 1.25 24.94 C, US
25 1800 284TS LM32748 C/A 3,899 CCD4B25TS61Y 435 230/460 64.0 93.6 1.25 23.57 C, US
25 1200 324T 170002.60 √ 5,670 C324T11DB5 670 208-230/460 67.0 93.0 1.15 26.02 C, CN, T
Continued on next page.
Shaded model numbers are cast iron frame.
Duty Motors
Automotive
Green items are Premium Efficient. Note listing on inside back flap.
“E” prefix items comply with SMR 2015. Specifications are subject to change without notice.
C/A - Check availability.
D - Item to be discontinued once inventory is depleted.
Note T - N/C T-stats
Tech Information
Drip- Proof - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V. Eff. Factor (Inches) Notes
30 3600 284TS 170036.60 √ C284T34DB4 406 208-230/460 68.5 94.1 1.15 22.17 C, CN, T
30 3600 284T LM32687 C/A 8,205 SD2B30T61Y 365 230/460 67.0 91.7 1.25 23.00 S, US
30 1800 286T 170013.60 √ 3,909 C286T17DB8 490 230/460 71.0 94.1 1.15 25.00 C, CN, T
30 1800 286T LM29577 √ 4,520 CCD4B30T61Y 491 230/460 74.0 94.1 1.25 26.81 C, US
30 1800 286TS LM32749 C/A 4,520 CCD4B39TS61Y 423 230/460 73.0 94.1 1.25 25.44 C, US
30 1200 326T 170004.60 √ 5,913 C326T11DB1 760 208-230/460 78.0 93.6 1.15 27.52 C, CN, T
TEFC Motors
Single Phase
40 3600 286TS 170038.60 √ 5,510 C286T34DB3 451 208-230/460 91.0 93.6 1.15 23.62 C, CN, T
40 3600 286TS LM13969 C/A 9,874 SD2B40TS61Y 389 230/460 90.0 93.6 1.25 23.25 S, US
40 3600 286T LM32750 √ 9,874 SD2B40T61Y 389 230/460 90.0 92.4 1.25 24.54 S, US
40 1800 324T 170017.60 √ 5,149 C324T17DB8 591 208-230/460 96.0 94.1 1.15 26.02 C, CN, T
40 1800 324T LM13811 √ 10,475 SD4B40T61Y 469 230/460 104.0 94.1 1.25 25.82 S, US
40 1800 324TS LM32751 C/A 10,475 SD4B40TS61Y 469 230/460 103.0 94.1 1.25 24.32 S, US
40 1200 364T 170147.60 √ 8,431 C364T11DB1 892 208-230/460 100.0 94.1 1.15 31.54 C, CN, T
50 3600 324TS 170040.60 √ 6,722 C324T34DB3 558 208-230/460 112.0 94.1 1.15 24.53 C, CN, T
ODP Motors
Three Phase
50 3600 324T LM32752 C/A 9,946 SD2B50T61Y 469 230/460 110.0 93.0 1.25 25.82 S, US
50 1800 326T 170021.60 √ 6,221 C326T17DB5 660 208-230/460 118.0 94.5 1.15 27.52 C, CN, T
50 1800 326T LM13813 √ 10,604 SD4B50T61Y 522 230/460 131.0 95.0 1.25 27.32 S, US
50 1800 326TS LM32674 √ 10,604 SD4B50T61Y 522 230/460 131.0 94.5 1.25 25.82 S, US
50 1200 365T 170148.60 √ 9,644 C365T11DB1 918 208-230/460 128.0 94.5 1.15 32.72 C, CN, T
60 3600 326TS 170042.60 √ 8,038 C326T34DB5 600 208-230/460 136.0 94.1 1.25 26.02 C, CN, T
60 3600 326TS LM13814 C/A 9,660 SD2B60TS61Y 522 230/460 136.0 94.5 1.25 25.82 S, US
TEFC Motors
Three Phase
60 3600 326T LM32682 C/A 9,660 SDB60T61Y 522 230/460 136.0 93.6 1.25 27.32 S, US
60 1800 364T 170025.60 √ 6,850 C364T17DB7 1115 208-230/460 139.0 94.1 1.15 31.54 C, CN, T
60 1800 364T LM14813 √ 14,349 SD4B60T61Y 712 230/460 140.0 95.0 1.25 28.40 S, US
60 1800 364TS LM32753 C/A 14,349 SD4B60TS61Y 712 230/460 140.0 95.0 1.25 26.27 S, US
60 1200 404T 170149.60 √ 10,677 C404T11DB5 1226 208-230/460 159.0 94.5 1.25 32.76 C, CN, T
75 3600 364TS 170044.60 √ 10,620 C364T34DB3 1005 208-230/460 170.0 94.1 1.15 29.41 C, CN, T
75 3600 364TS LM14812 C/A 15,599 SD2B75TS61Y 712 230/460 164.0 94.5 1.25 29.77 S, US
Inverter Duty
75 3600 364T LM32754 C/A 15,599 SD2B75T61Y 712 230/460 164.0 93.6 1.25 28.40 S, US
Motors
75 1800 365T 170029.60 √ 8,446 C365T17DB5 1093 208-230/460 174.0 94.5 1.15 32.72 C, CN, T
75 1800 365T LM14815 C/A 14,607 SD4B75T61Y 763 230/460 176.0 95.0 1.25 29.40 S, US
75 1800 365TS LM32755 √ 14,607 SD4B75TS61Y 763 230/460 180.0 95.0 1.25 27.27 S, US
75 1200 405T 170150.60 √ 12,653 C405T11DB6 1275 208-230/460 199.0 94.5 1.15 34.25 C, CN, T
100 3600 365TS 170151.60 √ 12,005 C365T34DB4 1078 208-230/460 226.0 94.5 1.15 30.59 C, CN, T
100 3600 365TS LM14814 C/A 14,106 SD2B100TS61Y 763 230/460 220.0 95.0 1.25 27.27 S, US
Severe Duty
100 3600 365T LM32756 C/A 14,106 SD2B100T61Y 763 230/460 220.0 93.6 1.25 29.40 S, US
Motors
100 1800 404T 170152.60 √ 11,556 C404T17DB5 1183 208-230/460 225.0 95.4 1.15 36.42 C, CN, T
100 1800 404T LM13943 √ 16,086 SD4B100T61Y 882 230/460 244.0 95.4 1.25 33.31 S, US
100 1800 404TS LM32757 √ 16,086 SD4B100TS61Y 882 230/460 260.0 95.4 1.25 29.18 S, US
100 1200 444T 170269.60 √ 14,945 C444T11DB4 2604 460 118 * 95.4 1.15 40.00 C, CN, T
Continued on next page.
Shaded model numbers are cast iron frame.
Note listing on inside back flap.
Explosion Proof
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V. Eff. Factor (Inches) Notes
125 3600 404TS 170154.60 √ 13,878 C404T34DB1 1585 230/460 284 94.5 1.15 29.76 C, CN, T
125 3600 404TS LM13942 C/A 17,131 SD2B125TS61Y 882 230/460 276 95.0 1.25 29.20 S, US
125 3600 404T LM32758 C/A 17,131 SD2B125T61Y 882 230/460 276 94.1 1.25 32.00 S, US
125 1800 405T 170155.60 √ 14,626 C405T17DB6 1292 208-230/460 280 95.4 1.15 34.25 C, CN, T
125 1800 405TS LM32759 C/A 16,270 SD4B125TS61Y 958 230/460 306 95.4 1.25 30.68 S, US
125 1200 445T 170259.60 √ 19,427 C445T11DB4 2200 460 148 * 95.8 1.25 40.00 C, CN, T
TEFC Motors
Single Phase
150 3600 405TS 171449.60 √ 17,122 C405T34DB2 1173 460 169 * 94.5 1.15 31.26 C, CN, T
150 1800 444T 171522.60 √ 17,271 C444T17DB2 2150 460 164 * 95.8 1.15 40.00 C, CN, T
150 1800 444T LM13817 √ 20,846 SD4B150T64Y 1277 460 170 * 95.8 1.25 37.43 S, US
150 1800 444TS LM32760 √ 20,846 SD4B150TS64Y 277 460 170 * 95.8 1.25 33.50 S, US
150 1200 445T 171576.60 √ 20,841 C445T11DB5 2153 460 178 * 95.8 1.15 40.00 C, CN, T
200 3600 444TS 171573.60 √ 22,771 C444T35DB1 1765 460 216 * 95.4 1.25 36.22 C, CN, T
200 1800 445T 171523.60 √ 19,918 C445T17DB14 2037 460 220 * 95.8 1.15 40.00 C, CN, T
200 1800 445T LM13820 √ 25,638 SD4B200T64Y 1438 460 233 * 96.2 1.25 39.43 S, US
ODP Motors
Three Phase
200 1800 445TS LM32761 C/A 25,638 SD4B200TS64Y 1449 460 233 * 96.2 1.25 35.50 S, US
200 1200 447T 171577.60 √ 27,396 C447T11DB1 2750 460 239 * 96.2 1.15 48.62 C, CN, T
200 1200 449T LM16239 √ 28,744 SDB200T64Y 2112 460 255 * 95.8 1.15 47.93 S, US
250 3600 445TS LM13822 √ 37,425 SD2B250TS64Y 1438 460 267 * 95.8 1.15 35.50 S, US
250 1800 445T 171524.60 √ 22,357 C445T17DB19 1940 460 284 * 95.8 1.15 40.00 C, CN, T
250 1800 447T LM16235 C/A 35,635 SD4B250T64Y 1745 460 284 * 95.8 1.15 42.93 S, US
300 3600 447TS LM13825 C/A 44,088 SD2B300TS64Y 1745 460 316 * 96.2 1.15 39.00 S, US
TEFC Motors
Three Phase
300 3600 447TS LM13764 C/A 34,914 SD2P300TS64Y 1745 460 316 * 95.4 1.15 39.00 S, US
300 1800 447T LM13826 √ 37,157 SD4B300T64Y 1745 460 348 * 95.8 1.15 42.93 S, US
300 1800 447TS LM32143 C/A 32,768 SD4B300TS64Y 1775 460 348 * 95.8 1.15 39.00 S, US
300 1800 445T 171525.60 √ 25,648 C445T17DB20 2345 460 329 * 95.8 1.15 40.00 C, CN, T
350 3600 447TS LM13767 √ 39,520 SD2P350TS64Y 1745 460 369 * 95.4 1.15 39.00 S, US
350 3600 449TS LM16237 C/A 52,400 SD2B350TS64Y 2112 460 368 * 95.8 1.15 44.00 S, US
350 1800 447TS LM34097 √ 40,422 SD4B350TS64Y 460 405 * 95.8 1.00 39.00 S, US
Inverter Duty
350 1800 447T 171518.60 √ 28,306 C447T17DB10 2041 460 392 * 95.8 1.15 48.62 C, CN, T
Motors
400 3600 449TS LM13831 C/A 57,687 SD2B400TS64Y 2112 460 430 * 95.8 1.15 44.00 S, US
400 1800 449T LM13832 C/A 55,979 SD4B400T64Y 2112 460 445 * 96.2 1.15 47.90 S, US
400 1800 449TS LM22759 C/A 41,900 SD4B400TS64Y 2112 460 460 * 95.8 1.15 44.00 S, US
Shaded model numbers are cast iron frame. Continued on next page.
Green items are Premium Efficient. Note listing on inside back flap.
C/A - Check Availability.
Severe Duty
Tech Information
Drip-Proof - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V. Eff. Factor (Inches) Notes
1/3 1800 S56C E103014.00 √ 493 C4T17DC55 20 230/460 1.0 69.5 1.35 10.74 S, MX
1/3 3600 S56C E100375.00 √ 511 C4T34DC45 19 230/460 1.4 69.5 1.35 11.04 S, US
1/3 1800 S56C 102695.00 D 528 C4T17DC45 22 230/460 1.3 77.0 1.25 11.49 S, MX
1/3 1800 S56C E102695.00 √ 528 C4T17DC45 22 230/460 1.2 77.0 1.25 11.49 S, MX, T
1/2 3600 S56C E100056.00 √ 552 C4T34DC46 19 230/460 1.8 73.4 1.25 11.04 S, US
1/2 1800 56C E119352.00 √ 595 C6T17DC97 29 230/460 2.0 78.2 1.25 9.87 S, US, T
TEFC Motors
Single Phase
1/2 1200 56C E110434.00 √ 899 C6T11DC12 29 230/460 2.2 75.3 1.15 10.87 S, US, T
3/4 3600 S56C E100378.00 √ 557 C4T34DC3 20 230/460 2.4 79.0 1.25 9.74 S, US, T
3/4 1800 56C E114934.00 √ 605 C6T17DC68 29 230/460 2.4 81.5 1.25 10.87 S, US, T
3/4 1200 143TC 120063.00 √ 776 C143T11DC1 20 208-230/460 3.4 80.0 1.15 11.28 S, US
3/4 1200 56C E116728.00 √ 943 C6T11DC13 36 230/460 2.8 81.7 1.15 11.87 S, US, T
1 3600 56C E110111.00 √ 570 C6T34DC7 22 230/460 3.2 77.0 1.25 9.87 S, US, T
1 1800 143TC 121064.00 C/A 876 C143T17DC12 32 230/460 3.2 85.5 1.25 12.19 S, US, T
1 1800 56C E116740.00 √ 876 C6T17DC80 32 230/460 3.2 85.5 1.25 12.12 S, US, T
ODP Motors
Three Phase
1 1200 145TC 122162.00 C/A 935 C145T11DC6 41 208-230/460 3.9 82.5 1.15 13.19 S, US
1 1/2 3600 143TC 122214.00 √ 863 C143T34DC10 41 208-230/460 4.4 84.0 1.15 12.19 S, US, T
1 1⁄2 3600 56C E110437.00 √ 854 C4T34DC48 35 230/460 4.0 84.0 1.25 11.87 S, US, T
1 1⁄2 1800 145TC 121063.00 C/A 914 C145T17DC30 36 230/460 4.8 86.5 1.25 13.19 S, US, T
1 1⁄2 1800 56C E116741.00 √ 914 C6T17DC81 36 230/460 4.8 86.5 1.25 12.87 S, US, T
2 3600 143TC 122164.00 √ 948 C143T34DC9 47 208-230/460 4.8 85.5 1.15 12.69 S, US
2 3600 56C E113894.00 √ 948 C6T34DC104 42 230/460 4.8 85.5 1.25 12.87 S, US, T
TEFC Motors
Three Phase
2 1800 145TC 121071.00 √ 1,043 C145T17DC31 44 230/460 5.8 86.5 1.25 13.69 S, US, T
2 1800 56C E116742.00 √ 1,028 C6T17DC82 44 230/460 5.8 86.5 1.25 13.37 S, US, T
2 1200 184TC 132427.00 C/A 1,111 C182T11DC112 85 230/460 7.2 88.5 1.15 15.20 S, MX
3 3600 145TC 122163.00 √ 993 C145T34DC17 43 208-230/460 7.2 85.5 1.15 13.19 S, US
3 3600 56C E114420.00 √ 985 C6T34DC105 35 230/460 7.2 85.5 1.25 12.87 S, US, T
3 1800 182TC 131518.00 C/A 1,102 C182T17DC20 78 230/460 8.0 89.5 1.25 13.20 S, MX, T
5 3600 182TC 132426.00 √ 1,015 C182T34DC111 63 230/460 12.4 86.5 1.15 13.20 S ,MX
Inverter Duty
5 1800 184TC 131517.00 √ 1,296 C184T17DC16 99 230/460 12.6 89.5 1.25 14.20 S, MX, T
Motors
7 1/2 3600 184TC 132425.00 √ 1,527 C184T34DC110 90 230/460 17.8 88.5 1.15 14.70 S, MX
7 1⁄2 1800 213TC 140483.00 √ 1,436 C213T17DC7 132 230/460 20.8 91.0 1.25 16.25 S, MX, T
10 3600 213TC 141228.00 √ 1,681 C215T34DC69 145 230/460 24.2 90.2 1.15 18.03 S, MX
10 1800 215TC G140108.00 D 1,544 C215T17DC8 129 230/460 28.0 89.5 1.15 16.75 S, MX
10 1800 215TC 140485.00 C/A 1,621 C213T17DC5 162 208-230/460 26.8 91.9 1.25 17.25 S, MX, T
15 3600 215TC 141229.00 √ 2,171 C215T34DC70 158 230/460 36.5 91.0 1.15 18.03 S, MX
Severe Duty
15 1800 254TC 171682.60 √ 2,519 C254T17DC8 300 208-230/460 37.0 93.0 1.15 20.94 C, CN, T
Motors
20 3600 254TC 171683.60 √ 3,153 C254T34DC4 276 208-230/460 46.0 91.0 1.15 20.94 C, CN, T
20 1800 256TC 171684.60 √ 3,144 C256T17DC6 324 208-230/460 51.0 93.0 1.15 22.60 C, CN, T
25 3600 256TC 171685.60 √ 3,867 C256T34DC3 315 208-230/460 57.0 92.5 1.15 23.03 C, CN, T
25 1800 284TC G151686.60 D 3,366 C284T17DC2 388 208-230/460 59.0 91.7 1.15 23.54 C, CN, T
25 1800 284TC 171686.60 √ 3,932 C284T17DC3 404 208-230/460 59.5 93.6 1.15 23.54 C, CN, T
30 3600 284TSC G151687.60 D 3,686 C284T34DC2 373 230/460 70.4 91.0 1.15 25.00 C, CN, T
Explosion Proof
30 3600 284TSC 171687.60 √ 4,262 C284T34DC3 406 230/460 68.5 94.1 1.15 25.00 C, CN, T
Motors
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V. Eff. Factor (Inches) Notes
1/3 1800 S56C LM24277 D 493 SRDAS0.33TC61 15 230/460 2.2 67.0 1.35 9.80 S, MX
1/3 1800 S56C E103021.00 C/A 553 C4T17DK9 23 230/460 1.2 77.0 1.25 11.49 S, MX, T
1/2 3600 S56C E100600.00 √ 587 C4T34DK18 30 230/460 1.8 78.2 1.25 11.04 S, US
1/2 1800 56C E119353.00 √ 612 C6T17DK40 23 230/460 2.0 78.2 1.25 9.87 S, US, T
3/4 3600 S56C E102971.00 √ 591 C4T34DK9 21 230/460 2.4 79.0 1.25 9.74 S, US, T
3/4 1800 S56C LM34055 √ 616 SRD4B0.75TC61 30 230/460 2.6 81.1 1.25 11.55 S, MX
TEFC Motors
Single Phase
3/4 1800 56C E116762.00 √ 620 C6T17DK30 29 230/460 2.4 81.5 1.25 10.87 S, US, T
1 3600 56C E116784.00 C/A 597 C6T34DK16 20 230/460 3.2 77.0 1.15 9.87 S, US, T
1 1800 S56C LM34056 √ 899 SRD4B1TC61 30 230/460 3.0 83.5 1.15 12.19 S, MX
1 1800 56C E116763.00 √ 887 C6T17DK33 37 230/460 3.2 85.5 1.25 12.12 S, US, T
1 1800 143TC 121935.00 C/A 815 C143T17DK6 39 230/460 3.1 85.5 1.25 12.19 S, US, T
1 1/2 3600 56C E116785.00 √ 870 C6T34DK20 33 230/460 4.0 84.0 1.15 11.87 S, US, T
1 1/2 1800 56HC LM34057 √ 936 SRD4B1.5TC61 30 230/460 4.6 86.5 1.15 13.50 S, US, 6
1 1/2 1800 56C E116764.00 C/A 916 C6T17DK32 41 230/460 4.8 86.5 1.25 12.87 S, US, T
ODP Motors
Three Phase
1 1/2 1800 145TC 121675.00 C/A 995 C145T17DK22 37 208-230/460 4.8 86.5 1.25 13.12 S, US, T
2 3600 56C E114218.00 √ 1,045 C6T34DK25 44 230/460 4.8 85.5 1.15 12.87 S, US, T
2 1800 56HC LM34058 √ 1,046 SRD4B2TC61 47 230/460 6.0 86.5 1.15 13.44 S, US, 6
2 1800 56HC E116765.00 √ 1,038 C6T17DK31 48 230/460 5.8 86.5 1.25 13.37 S, US, 6, T
2 1800 145TC 121676.00 √ 1,038 C145T17DK21 42 230/460 5.8 86.5 1.25 13.62 S, US, T
3 3600 145TC 121928.00 C/A 954 C145T34DK16 46 230/460 7.2 85.5 1.25 13.19 S, US, T
3 1800 182TC 132081.00 √ 1,123 C182T17DK17 76 230/460 8.0 89.5 1.25 13.70 S, MX, T
TEFC Motors
Three Phase
5 3600 182TC 132242.00 √ 1,033 C184T34DK20 99 230/460 12.0 86.5 1.15 15.20 S, MX, T
5 1800 184TC 132082.00 √ 1,315 C184T17DK26 97 230/460 12.6 89.5 1.25 14.20 S, MX, T
7 1⁄2 3600 184TC 132244.00 √ 1,559 C184T34DK21 103 230/460 17.6 88.5 1.15 16.20 S, MX, T
7 1⁄2 1800 213TC 140767.00 C/A 1,447 C213T17DK7 132 230/460 21.8 91.0 1.25 16.25 S, MX, T
7 1⁄2 1800 213TC 170170.60 √ 1,446 C213T17DK15 165 208-230/460 19.8 91.0 1.15 17.32 C, CN, T
10 3600 213TC 141111.00 √ 1,729 C213T34DK6 128 230/460 23.4 89.5 1.15 18.03 S, MX
10 3600 213TC LM32778 C/A 1,820 SSD2B10TC61 116 230/460 23.4 89.5 1.15 18.03 S, MX, T
Inverter Duty
10 3600 213TC 170171.60 √ 1,931 C213T3DK7 195 208-230/460 23.6 90.2 1.15 17.32 C, CN, T
Motors
10 1800 215TC 140768.00 √ 1,640 C215T17DK6 144 230/460 26.8 91.7 1.25 17.25 S, MX, T
10 1800 215TC LM32649 √ 1,892 SSD4B10TC61 152 230/460 25.0 91.7 1.25 21.09 S, MX
10 1800 215TC 170172.60 √ 1,891 C215T17DK13 200 208-230/460 25.6 91.7 1.15 18.90 C, CN, T
15 3600 215TC 170173.60 √ 2,667 C215T34DK9 200 208-230/460 34.5 91.0 1.15 17.87 C, CN, T
15 3600 215TC 141119.00 √ 2,234 C215T34DK3 155 230/460 35.0 91.0 1.15 19.28 S, MX
15 1800 254TC 170175.60 √ 2,700 C254T17DK7 280 208-230/460 37.0 93.0 1.15 21.60 C, CN, T
Severe Duty
15 1800 254TC LM32781 C/A 2,973 CCD4B15TC61 326 230/460 37.0 93.0 1.25 23.31
Motors
Tech Information
Drip-Proof - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V. Eff. Factor (Inches) Notes
20 3600 254TC 170070.60 √ 3,225 C254T34DK6 275 208-230/460 46.0 93.0 1.15 20.94 C, CN, T
20 1800 256TC 170071.60 √ 3,284 C256T17DK6 340 208-230/460 49.0 93.0 1.15 23.03 C, CN, T
20 1800 286TC LM32783 √ 4,412 SSD4B20TC61 352 230/460 48.0 93.0 1.25 26.19 S, US
25 3600 256TC 171688.60 √ 4,035 C256T34DK6 383 208-230/460 57 93.0 1.15 23.03 C, CN, T
25 1800 284TC 170073.60 √ 4,149 C284T17DK4 404 208-230/460 59.5 93.6 1.15 24.02 C, CN, T
25 1800 284TSC LM32785 √ 4,274 CCD4B25TSC61Y 447 230/460 62 93.6 1.25 23.57 C, US
TEFC Motors
Single Phase
25 1200 324TC LM14535 C/A 6,867 SD6B25TC61Y 522 230/460 65 93.0 1.25 28.00 S, US
30 3600 284TSC LM17382 √ 7,618 SD2B30TSC61Y 357 230/460 67 93.0 1.25 21.78 S, US
30 1800 286TC 171377.60 √ 4,750 C286T17DK5 471 208-230/460 71 94.1 1.15 25.51 C, CN, T
30 1800 286TSC LM32786 C/A 4,951 CCD4B30TSC61Y 461 230/460 74 94.1 1.25 25.44 C, US
40 3600 286TSC LM17384 C/A 9,957 SD2B40TSC61Y 406 230/460 90 93.6 1.25 23.28 S, US
40 1800 324TC 170378.60 √ 6,020 C324T17DK10 560 208-230/460 96 94.1 1.15 26.02 C, CN, T
40 1800 324TC LM13837 C/A 10,829 SD4B40TC61Y 479 230/460 103 94.1 1.25 25.91 S, US
50 3600 324TSC LM13838 √ 10,009 SD2B50TSC61Y 479 230/460 110 94.1 1.25 24.41 S, US
ODP Motors
Three Phase
50 1800 326TC 170379.60 √ 7,130 C326T17DK4 614 208-230/460 118 94.5 1.15 27.52 C, CN, T
50 1800 326TC LM13839 √ 10,834 SD4B50TC61Y 535 230/460 131 94.5 1.25 27.41 S, US
50 1800 326TSC LM32655 √ 10,834 SD4B50TSC61Y 550 230/460 131 94.5 1.25 25.91 S, US
60 3600 326TSC LM13840 C/A 9,639 SD2B60TSC61Y 535 230/460 136 93.6 1.25 25.91 S, US
60 1800 364TC 171689.60 √ 8,948 C364T17DK2 716 208-230/460 139 95.4 1.15 28.01 C, CN, T
60 1800 364TSC LM32787 √ 14,514 SD4B60TSC61Y 724 230/460 140 95.0 1.25 26.27 S, US
60 1800 364TC LM15570 C/A 14,514 SD4B60TC61Y 747 230/460 140 95.0 1.25 28.35 S, US
TEFC Motors
Three Phase
75 3600 364TSC LM15569 √ 15,384 SD2B75TSC61Y 722 230/460 164 95.0 1.25 26.27 S, US
75 1800 365TC 171690.60 √ 10,867 C365T17BK2 766 208-230/460 174 95.4 1.15 30.05 C, CN, T
75 1800 365TSC LM32656 √ 14,465 SD4B75TSC61Y 775 230/460 176 95.0 1.25 27.27 S, US
100 3600 365TSC LM15572 C/A 15,802 SD2B100TSC61Y 771 230/460 218 95.4 1.25 27.27 S, US
100 1800 404TC 171691.60 √ 13,833 C404T17DK2 1141 208-230/460 225 95.4 1.15 32.68 C, CN, T
100 1800 404TSC LM32788 √ 15,611 SD4B100TSC1Y 898 230/460 260 95.4 1.25 29.16 S, US
125 3600 404TSC LM17388 C/A 20,235 SD2B125TSC61Y 889 230/460 276 95.0 1.25 29.16 S, US
Inverter Duty
125 1800 405TSC LM32657 √ 16,297 SD4B125TSC61Y 974 230/460 306 95.4 1.25 30.66 S, US
Motors
125 1800 405TC LM17389 C/A 16,297 SD4B125TC61Y 984 230/460 304 95.4 1.25 33.66 S, US
150 3600 405TSC LM17390 C/A 23,816 SD2B150TSC61Y 965 230/460 338 94.1 1.25 30.66 S, US
150 1800 444TSC LM32789 √ 20,881 SD4B150TSC64Y 1298 460 170 * 95.8 1.25 33.50 S, US
200 3600 444TSC LM13795 C/A 29,190 SD2B200TSC64Y 920 460 216 * 95.8 1.25 33.50 S, US
200 1800 445TSC LM32677 √ 25,693 SD4B200TSC64Y 1470 460 233 * 96.2 1.25 35.50 S, US
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Severe Duty
Green items are Premium Efficient.
Motors
*F.L. Amps at 460V.
C/A - Check Availability.
Note T - N/C T-stats
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. F. L. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
TEFC Motors
Single Phase
1 1⁄2 1200 182T 199685.00 D 967 C182T11DB10 69 230/460 4.4 86.5 1.15 13.72 S, CN
1 1⁄2 1200 182T B199685.00 D 891 C182T11DB11 69 230/460 4.6 86.5 1.15 13.72 S, CN
1 1⁄2 1200 182T GT0005A √ 891 182TTDBD6076 69 230/460 4.6 86.5 1.15 13.72 S, MX
2 1200 184T 199686.00 D 983 C184T11DB10 79 230/460 5.8 87.5 1.15 14.72 S, CN
2 1200 184T B199686.00 D 905 C184T11DB11 79 230/460 5.8 87.5 1.15 14.72 S, CN
2 1200 184T GT0008A √ 905 184TTDBD6076 79 230/460 5.8 87.5 1.15 14.72 S, MX
3 1800 182T 199687.00 D 786 C182T17DB62 73 230/460 7.6 90.2 1.15 13.72 S, CN
ODP Motors
Three Phase
3 1800 182T B199687.00 D 786 C182T17DB65 73 230/460 8.0 89.5 1.15 13.72 S, CN
3 1800 182T GT0010A √ 786 182TTDBD6026 73 230/460 8.0 89.5 1.15 13.72 S, MX
3 1800 182T GT0110 √ 786 182TTDBD6030 73 575 3.2 89.5 1.15 13.72 S, CN
3 1200 213T B199688.00 D 1,240 C213T11DB13 120 230/460 8.4 88.5 1.15 17.52 S, CN
3 1200 213T GT0011A √ 1,240 213TTDBD6076 120 230/460 8.4 89.4 1.15 17.52 S, MX
5 3600 182T 199689.00 D 829 C182T34DB8 85 230/460 12.4 87.5 1.15 13.72 S, CN
5 3600 182T B199689.00 D 829 C182T34DB89 85 230/460 12.6 86.5 1.15 12.25 S, CN
TEFC Motors
Three Phase
5 3600 182T GT0012A √ 829 182TTDBD6001 85 230/460 12.6 86.5 1.15 12.25 S, MX
5 1800 184T B199690.00 D 885 C184T17DB91 91 230/460 12.6 89.5 1.15 14.72 S, CN
5 1800 184T GT0013A √ 885 184TTDBD6026 91 230/460 12.6 89.5 1.15 14.72 S, MX
5 1800 184T GT0113 √ 885 184TTDBD6030 91 575 5.1 89.5 1.15 14.72 S, CN
5 1200 184T B199691.00 D 1,444 C215T11DB11 138 230/460 13.8 89.5 1.15 17.52 S, CN
5 1200 215T GT0014A √ 1,444 215TTDBD6076 138 230/460 13.7 89.5 1.15 17.52 S, MX
7 1/2 3600 184T 199692.00 D 1,107 C184T34DB17 98 230/460 18.0 88.5 1.15 14.72 S, CN
Inverter Duty
7 1/2 3600 184T B199692.00 D 1,020 C184T34DB18 98 230/460 17.8 88.5 1.15 13.25 S, CN
Motors
7 1/2 3600 184T GT0015A √ 1,020 184TTDBD6001 98 230/460 17.8 88.5 1.15 13.25 S, MX
7 1/2 1800 213T B199693.00 D 1,145 C213T17DB50 133 230/460 19.8 91.0 1.15 17.52 S, CN
7 1/2 1800 213T GT0016A √ 1,145 213TTDBD6026 133 230/460 19.8 91.0 1.15 17.52 S, MX
7 1/2 1800 213T GT0116 √ 1,145 213TTDBD6030 133 575 7.9 91.0 1.15 17.52 S, CN
7 1/2 1200 254T B199694.00 D 1,807 C254T11DB47 230 230/460 20.2 90.2 1.15 22.64 S, CN
7 1/2 1200 254T GT0057 √ 1,807 254TTDBD6076 230 230/460 20.2 90.2 1.15 22.64 S, CN
10 3600 213T B199695.00 D 1,308 C213T34DB49 125 230/460 24.3 89.5 1.15 17.52 S, CN
Severe Duty
10 3600 213T GT0018A √ 1,308 213TTDBD6001 125 230/460 23.6 90.2 1.15 17.52 S, MX
Motors
10 1800 215T 199696.00 D 1,351 C215T17DB58 144 230/460 25.6 91.7 1.15 17.52 S, CN
10 1800 215T B199696.00 D 1,351 C215T17DB59 144 230/460 25.4 91.7 1.15 17.52 S, CN
10 1800 215T GT0019A √ 1,351 215TTDBD6026 144 230/460 25.4 91.7 1.15 17.52 S, MX
10 1800 215T GT0119 √ 1,351 215TTDBD6030 144 575 10.2 91.7 1.15 17.52 S, CN
10 1200 256T 199697.00 D 2,251 C256T11DB48 244 230/460 27.6 91.7 1.15 24.22 C, CN
10 1200 256T B199697.00 D 2,139 C256T11DB49 285 230/460 25.6 91.7 1.15 24.22 S, CN
Explosion Proof
10 1200 256T GT0058 √ 2,139 256TTDBD6076 285 230/460 25.6 91.7 1.15 24.22 S, CN
Motors
15 3600 215T B199698.00 D 1,916 C215T34DB7 127 230/460 36.0 90.2 1.15 17.52 S, CN
15 3600 215T GT0021A √ 1,916 215TTDBD6001 127 230/460 36.0 90.9 1.15 17.52 S, MX
15 1800 254T 199699.00 D 2,191 C254T17DB46 334 230/460 36.5 93.0 1.15 22.64 C, CN
15 1800 254T B199699.00 D 2,083 C254T17DB47 272 230/460 36.5 93.0 1.15 22.64 S, CN
15 1800 254T GT0059 √ 2,083 254TTDBD6026 272 230/460 36.5 93.0 1.15 22.64 S, CN
15 1800 254T GT0159 √ 2,083 254TTDBD6030 272 575 15.1 93.0 1.15 22.64 S, CN
Duty Motors
15 1200 284T B199700.00 D 2,818 C284T11DB10 317 230/460 41.0 91.7 1.15 22.64 S, CN
Automotive
15 1200 284T GT0060 √ 2,818 284TTDBD6076 317 230/460 41.0 91.7 1.15 22.64 S, CN
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Green items are Premium Efficient.
D - Item to be discontinued once inventory is depleted.
*Amps at 460 volts.
Tech Information
Drip-Proof - General Purpose
Stock
Single Phase
ODP Motors
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
20 3600 254T B199701.00 D 2,096 C254T34DB7 256 230/460 48.0 91.0 1.15 22.64 S, CN
20 3600 254T GT0061 √ 2,096 254TTDBD6001 256 230/460 48.0 91.0 1.15 22.64 S, CN
20 1800 256T B199702.00 D 2,202 C256T17DB13 314 230/460 48.5 93.0 1.15 24.22 S, CN
20 1800 256T GT0062 √ 2,202 256TTDBD6026 314 230/460 48.5 93.0 1.15 24.22 S, CN
20 1800 256T GT0162 √ 2,202 256TTDBD6030 314 575 19.5 93.0 1.15 24.22 S, CN
20 1200 286T 199703.00 D 3,613 C286T11DB7 499 230/460 54.0 92.4 1.15 27.09 C, CN
TEFC Motors
Single Phase
20 1200 286T B199703.00 D 3,433 C286T11DB8A 420 230/460 52.5 92.4 1.15 27.09 S, CN
20 1200 286T GT0063 √ 3,433 286TTDBD6076 420 230/460 52.5 92.4 1.15 27.09 S, CN
25 3600 256T B199704.00 D 2,669 C256T34DB11 231 230/460 59.5 91.7 1.15 24.22 S, CN
25 3600 256T GT0064 √ 2,669 256TTDBD6001 231 230/460 59.5 91.7 1.15 24.22 S, CN
25 1800 284T 199705.00 D 2,734 C284T17DB11 470 230/460 62.0 93.6 1.15 25.71 C, CN
25 1800 284T B199705.00 D 2,597 C284T17DB12 329 230/460 62.0 93.6 1.15 25.71 S, CN
25 1800 284T GT0065 √ 2,597 284TTDBD6026 329 230/460 62.0 93.6 1.15 25.71 S, CN
ODP Motors
Three Phase
25 1800 284T GT0165 √ 2,597 384TTDBD6030 376 575 24.8 93.6 1.15 25.71 S, CN
25 1200 324T 199706.00 D 4,304 C324T11DB7 594 230/460 68.0 93.0 1.15 28.55 C, CN
25 1200 324T B199706.00 D 4,304 C324T11DB8 430 230/460 65.0 93.0 1.15 28.55 S, CN
25 1200 324T GT0068 √ 4,304 324TTDBD6076 430 230/460 65.0 93.0 1.15 28.55 S, CN
30 3600 284TS 199707.00 D 3,476 C284T34DB9 447 230/460 66.5 91.7 1.15 24.41 C, CN
30 3600 284TS B199707.00 D 3,301 C284T34DB10 376 230/460 71.5 91.7 1.15 24.34 S, CN
30 3600 284TS GT0069 √ 3,301 284TSTDBD6001 376 230/460 71.5 91.7 1.15 24.34 S, CN
TEFC Motors
30 1800 286T 199708.00 D 3,154 C286T17DB14 507 230/460 73.0 94.1 1.15 27.09 C, CN
Three Phase
30 1800 286T B199708.00 D 2,997 C286T17DB15 377 230/460 72.5 94.1 1.15 27.09 S, CN
30 1800 286T GT0067 √ 2,997 286TTDBD6026 377 230/460 72.5 94.1 1.15 27.09 S, CN
30 1800 286T GT0167 √ 2,997 286TTDBD6030 377 575 29.0 94.1 1.15 27.09 S, CN
30 1200 326T 199709.00 D 5,044 C326T11DB7 699 230/460 79.0 93.6 1.15 29.73 C, CN
30 1200 326T B199709.00 D 5,044 C326T11DB8 529 230/460 75.0 93.6 1.15 29.73 S, CN
30 1200 326T GT0071 √ 5,044 326TTDBD6076 529 230/460 75.0 93.6 1.15 29.73 S, CN
40 3600 286TS B199710.00 D 4,073 C286T34DB7 348 230/460 93.0 92.4 1.15 25.72 S, CN
Inverter Duty
40 3600 286TS GT0072 √ 4,073 286TSTDBD6001 348 230/460 93.0 92.4 1.15 25.72 S, CN
Motors
40 1800 324T 199711.00 D 3,965 C324T17DB12 615 230/460 95.0 94.5 1.15 28.55 C, CN
40 1800 324T B199711.00 D 3,965 C324T17DB13 452 230/460 95.5 94.1 1.15 28.55 S, CN
40 1800 324T GT0073 √ 3,965 324TTDBD6026 452 230/460 95.5 94.1 1.15 28.55 S, CN
40 1800 324T GT0173 √ 3,965 324TTDBD6030 152 575 38.5 94.1 1.15 28.55 S, CN
40 1200 364T 199712.00 D 6,476 C364T11DB8 823 230/460 97.0 94.1 1.15 31.69 C, CN
40 1200 364T B199712.00 D 6,476 C364T11DB9 672 230/460 97.0 94.1 1.15 31.69 S, CN
Severe Duty
40 1200 364T GT0075 √ 6,476 364TTDBD6086 672 230/460 97.0 94.1 1.15 31.69 S, CN
Motors
50 3600 324TS 199713.00 D 5,098 C324T34DB6 617 230/460 114.0 93.0 1.15 27.05 C, CN
50 3600 324TS B199713.00 D 5,098 C324T34DB7 411 230/460 115.0 93.0 1.15 27.05 S, CN
50 3600 324TS GT0076 √ 5,098 324TSTDBD6001 411 230/460 115.0 93.0 1.15 27.05 S, CN
50 1800 326T 199714.00 D 4,724 C326T17DB9 657 230/460 118.0 94.5 1.15 29.73 C, CN
50 1800 326T B199714.00 D 4,724 C326T17DB10 507 230/460 118.0 94.5 1.15 29.73 S, CN
50 1800 326T GT0077 √ 4,724 326TTDBD6026 507 230/460 118.0 94.5 1.15 29.73 S, CN
Explosion Proof
50 1800 326T GT0177 √ 4,724 326TTDBD6030 507 575 47 94.5 1.15 29.73 S, CN
Motors
50 1200 365T 199715.00 D 7,454 C365T11DB6 913 230/460 120.0 94.1 1.15 33.27 C, CN
50 1200 365T B199715.00 D 7,454 C365T11DB7 756 230/460 120.0 94.1 1.15 33.27 S, CN
50 1200 365T GT0079 √ 7,454 365TTDBD6086 756 230/460 120.0 94.1 1.15 33.27 S, CN
Shaded model numbers are cast iron frame. Continued on next page.
Green items are Premium Efficient. Note listing on inside back flap.
D - Item to be discontinued once inventory is depleted. Specifications are subject to change without notice.
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
60 3600 326TS 199716.00 D 6,102 C326T34DB8 679 230/460 134.0 93.6 1.15 28.23 C, CN
60 3600 326TS B199716.00 D 6,102 C326T34DB9 522 230/460 136.0 93.6 1.15 28.23 S, CN
60 3600 326TS GT0080 √ 6,102 326TSTDBD6001 522 230/460 136.0 93.6 1.15 28.23 S, CN
60 1800 364T 199717.00 D 5,615 C364T17DB8 871 230/460 139.0 95.0 1.15 31.69 C, CN
60 1800 364T B199717.00 D 5,615 C364T17DB9 677 230/460 140.0 95.0 1.15 31.69 S, CN
60 1800 364T GT0081 √ 5,615 364TTDBD6060 677 230/460 140.0 95.0 1.15 31.69 S, CN
TEFC Motors
Single Phase
60 1800 364T GT0181 √ 5,615 364TTDBD6030 677 575 56 95.0 1.15 31.69 S, CN
60 1200 404T 199718.00 D 8,970 C404T11DB7 1208 230/460 144.0 94.5 1.15 37.20 C, CN
60 1200 404T B199718.00 D 8,970 C404T11DB7 1146 230/460 141.0 94.5 1.15 37.20 C, CN
60 1200 404T GT0041A √ 8,970 404TTDCD6086 1146 230/460 141.0 94.5 1.15 37.20 C, MX
75 3600 364TS 199719.00 D 8,060 C364T34DB5 1200 230/460 166.0 93.6 1.15 29.57 C, CN
75 3600 364TS B199719.00 D 8,060 C364T34DB6 706 230/460 172.0 93.6 1.15 29.57 S, CN
75 3600 364TS GT0083 √ 8,060 364TSTDBD6001 706 230/460 172.0 93.6 1.15 29.57 S, CN
75 1800 365T 199720.00 D 6,726 C365T17DB8 993 230/460 174.0 95.0 1.15 33.27 C, CN
ODP Motors
Three Phase
75 1800 365T B199720.00 D 6,726 C365T17DB9 780 230/460 172.0 95.0 1.15 33.27 S, CN
75 1800 365T GT0084 √ 6,726 365TTDBD6060 780 230/460 172.0 95.0 1.15 33.27 S, CN
75 1800 365T GT0184 √ 6,726 365TTDBD6030 780 575 68.5 95.0 1.15 33.27 S, CN
75 1200 405T 199721.00 D 11,025 C405T11DB8 1287 230/460 180.0 94.5 1.15 38.78 C, CN
75 1200 405T B199721.00 D 11,025 C405T11DB9 1268 230/460 174.0 94.5 1.15 38.78 C, CN
75 1200 405T GT0044A √ 11,025 405TTDCD6081 1268 230/460 174.0 94.5 1.15 38.78 C, MX
100 3600 365TS 199722.00 D 9,864 C365T34DB7 930 230/460 222.0 93.6 1.15 31.14 C, CN
TEFC Motors
Three Phase
100 3600 365TS B199722.00 D 9,864 C365T34DB8 728 230/460 227.0 93.6 1.15 31.14 S, CN
100 3600 365TS GT0086 √ 9,864 365TSTDBD6001 728 230/460 227.0 93.6 1.15 31.14 S, CN
100 1800 404T 199723.00 D 8,769 C404T17DB8 1265 230/460 226.0 95.4 1.15 37.20 C, CN
100 1800 404T B199723.00 D 8,769 C404T17DB9 1219 230/460 228.0 95.4 1.15 37.20 C, CN
100 1800 404T GT0046A √ 8,769 404TTDCD6060 1219 230/460 228.0 95.4 1.15 37.20 C, MX
100 1800 404T GT0146 √ 8,769 404TTDCD6030 1219 575 91.0 95.4 1.15 37.20 C, CN
100 1200 444T 199724.00 D 13,687 444711DB6 1666 230/460 232.0 95.0 1.15 44.57 C, CN
Inverter Duty
100 1200 444T B199724.00 D 13,687 C444T11DB7 1760 230/460 232.0 95.0 1.15 44.57 C, CN
Motors
100 1200 444T GT0047A √ 13,687 444TTDCD6077 1760 230/460 232.0 95.0 1.15 44.57 C, MX
Shaded model numbers are cast iron frame. Continued on next page.
Green items are Premium Efficient. Note listing on inside back flap.
Specifications are subject to change without notice.
D - Item to be discontinued once inventory is depleted.
*Amps at 460 volts.
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Tech Information
Drip-Proof - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
125 3600 404TS 199725.00 D 11,800 C404T34DB5 1151 460 138 94.1 1.15 35.45 C, CN
125 3600 404TS B199725.00 D 11,800 C404T34DB6 1190 460 139 94.1 1.15 35.45 C, CN
125 3600 404TS GT0048A √ 11,800 404TSTDCD6001 1190 460 139 94.1 1.15 35.45 C, MX
125 1800 405T 199726.00 D 11,099 C405T17DB8 1363 460 140 95.4 1.15 38.78 C, CN
125 1800 405T B199726.00 D 11,099 C405T17DB9 1303 460 142 95.4 1.15 38.78 C, CN
125 1800 405T GT0049A √ 11,099 405TTDCD6060 1395 460 142 95.4 1.15 38.78 C, MX
TEFC Motors
Single Phase
125 1800 405T GT0149 √ 11,099 405TTDCD6030 1395 575 113 95.4 1.15 38.78 C, CN
125 1200 445T 199727.00 D 17,961 C445T11DB8 1815 460 145 95.0 1.15 44.57 C, CN
125 1200 445T B199727.00 D 17,961 C445T11DB9 1815 460 145 95.0 1.15 44.57 C, CN
125 1200 445T GT0050A √ 17,961 445TTDCD6076 1815 460 145 95.0 1.15 44.57 C, MX
150 3600 405TS 199728.00 D 13,807 C405T34DB4 1240 460 164 94.1 1.15 35.45 C, CN
150 3600 405TS B199728.00 D 13,807 C405T34DB5 1149 460 165 94.1 1.15 35.45 C, CN
150 3600 405TS GT0051A √ 13,807 405TSTDCD6007 1149 460 165 94.1 1.15 35.45 C, MX
150 1800 444T 199729.00 D 14,901 C444T17DB7 1843 460 168 95.8 1.15 44.57 C, CN
ODP Motors
Three Phase
150 1800 444T B199729.00 D 14,901 C444T17DB8 1786 460 168 95.8 1.15 44.57 C, CN
150 1800 444T GT0052A √ 14,901 444TTDCD6060 1786 460 168 95.8 1.15 44.57 C, MX
150 1800 444T GT0152 √ 14,901 444TTDCD6030 1786 575 134 95.8 1.15 44.57 C, CN
150 1200 447T 199730.00 D 18,469 C447T11DB3 2021 460 172 95.4 1.15 49.69 C, CN
150 1200 447T B199730.00 D 18,469 C447T11DB4 2021 460 173 95.4 1.15 49.69 C, CN
150 1200 447T GT0053A √ 18,469 447TTDCD6077 2021 460 173 95.4 1.15 49.69 C, MX
200 3600 444TS 199731.00 D 23,324 C444T34DB2 1880 460 215 95.0 1.15 40.83 C, CN
TEFC Motors
Three Phase
200 3600 444TS B199731.00 D 21,479 C444T34DB3 1946 460 215 95.0 1.15 40.83 C, CN
200 3600 444TS GT0054A √ 21,479 444TSTDCD6003 1946 460 215 95.0 1.15 40.83 C, MX
200 1800 445T 199732.00 D 20,304 C445T17DB18 2069 460 220 95.8 1.15 44.57 C, CN
200 1800 445T B199732.00 D 18,698 C445T17DB19 2017 460 223 95.8 1.15 44.57 C, CN
200 1800 445T GT0055A √ 18,698 445TTDCD6060 2017 460 223 95.8 1.15 44.57 C, MX
200 1800 445T GT0155 √ 18,698 445TTDCD6030 2017 575 178 95.8 1.15 44.57 C, CN
200 1200 449T 199733.00 D 25,571 C449T11DB1 2340 460 228 95.4 1.15 49.96 C, CN
Inverter Duty
200 1200 449T B199733.00 D 23,548 C449T11DB2 2335 460 230 95.4 1.15 49.96 C, CN
Motors
200 1200 449T GT0056A √ 23,548 449TTDCD6076 2335 460 230 95.4 1.15 49.96 C, MX
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Green items are Premium Efficient.
D - Item to be discontinued once inventory is depleted.
*Amps at 460 volts.
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. F. L. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
3 1800 182TC 199735.00 D 989 C182T17DK42 88 230/460 7.6 90.2 1.15 14.45 S, CN
3 1800 182TC B199735.00 D 911 C182T17DK45 88 230/460 8.0 89.5 1.15 13.00 S, CN
3 1800 182TC GT0210 √ 911 182TTDBD6028 88 230/460 8.0 89.5 1.15 13.00 S, CN
3 1800 182TC GT2110 √ 911 182TTDBD6035 88 575 3.2 89.5 1.15 13.00 S, CN
5 3600 182TC 199736.00 D 1,038 C182T34DK18 75 230/460 12.4 87.5 1.15 14.45 S, CN
5 3600 182TC B199736.00 D 956 C182T34DK21 75 230/460 12.6 86.5 1.15 13.00 S, CN
TEFC Motors
Single Phase
5 3600 182TC GT0212 √ 956 182TTDBD6003 75 230/460 12.6 86.5 1.15 13.00 S, CN
5 1800 184TC 199737.00 D 1,163 C184T17DK42 111 230/460 12.8 89.5 1.15 15.46 S, CN
5 1800 184TC B199737.00 D 1,071 C184T17DK45 111 230/460 12.6 89.5 1.15 14.00 S, CN
5 1800 184TC GT0213 √ 1,071 184TTDBD6028 111 230/460 12.6 89.5 1.15 14.00 S, CN
5 1800 184TC GT2113 √ 1,071 184TTDBD6035 111 575 5.1 89.5 1.15 14.00 S, CN
7 1/2 3600 184TC 199738.00 D 1,262 C184T34DK26 88 230/460 18.0 88.5 1.15 15.46 S, CN
7 1/2 3600 184TC B199738.00 D 1,162 C184T34DK29 88 230/460 17.8 88.5 1.15 14.00 S, CN
7 1/2 3600 184TC GT0215 √ 1,162 184TTDBD6003 88 230/460 17.8 88.5 1.15 14.00 S, CN
ODP Motors
Three Phase
7 1/2 1800 213TC 199739.00 D 1,341 C213T17DK45 144 230/460 19.0 91.7 1.15 18.10 S, CN
7 1/2 1800 213TC B199739.00 D 1,341 C213T17DK48 152 230/460 19.8 91.0 1.15 18.10 S, CN
7 1/2 1800 213TC GT0216 √ 1,341 213TTDBD6028 152 230/460 19.8 91.7 1.15 18.10 S, CN
7 1⁄2 1800 213TC GT2116 √ 1,341 213TTDBD6035 152 575 7.9 91.7 1.15 18.10 S, CN
10 3600 213TC B199740.00 D 1,551 C213T34DK50 140 230/460 23.6 89.5 1.15 18.10 S, CN
10 3600 213TC GT0218 √ 1,551 213TTDBD6003 123 230/460 23.6 89.5 1.15 18.10 S, CN
10 1800 215TC B199741.00 D 1,572 C215T17DK48 150 230/460 25.4 91.7 1.15 17.52 S, CN
TEFC Motors
Three Phase
10 1800 215TC GT0219 √ 1,572 215TTDBD6028 150 230/460 25.4 91.7 1.15 17.52 S, CN
10 1800 215TC GT2119 √ 1,572 215TTDBD6035 150 575 10.2 91.7 1.15 17.52 S, CN
15 3600 215TC B199742.00 D 2,192 C215T34DK49 172 230/460 36.0 90.2 1.15 18.10 S, CN
15 3600 215TC GT0221 √ 2,192 215TTDBD6003 145 230/460 36.0 91.0 1.15 18.10 S, CN
15 1800 254TC 199743.00 D 2,555 C254T17DK11 351 230/460 36.5 93.0 1.15 23.00 C, CN
15 1800 254TC B199743.00 D 2,428 C254T17DK14 285 230/460 36.5 93.0 1.15 23.14 S, CN
15 1800 254TC GT0259 √ 2,428 254TTDBD6028 293 230/460 36.5 93.0 1.15 23.14 S, CN
Inverter Duty
15 1800 254TC GT2159 √ 2,428 254TTDBD6035 293 575 14.6 93.0 1.15 23.14 S, CN
Motors
20 3600 254TC 199744.00 D 2,765 C254T34DK7 322 230/460 45.0 91.7 1.15 23.00 C, CN
20 3600 254TC B199744.00 D 2,628 C254T34DK10 280 230/460 48.0 91.0 1.15 23.14 S, CN
20 3600 254TC GT0261 √ 2,628 254TTDBD6003 280 230/460 48.0 91.7 1.15 23.14 S, CN
20 1800 256TC 199745.00 D 3,069 C256T17DK7 385 230/460 48.0 93.0 1.15 24.60 C, CN
20 1800 256TC B199745.00 D 2,915 C256T17DK10 340 230/460 48.5 93.0 1.15 24.72 S, CN
20 1800 256TC GT0262 √ 2,915 256TTDBD6028 313 230/460 48.5 93.0 1.15 24.72 S, CN
Severe Duty
20 1800 256TC GT2162 √ 2,915 256TTDBD6035 313 575 19.4 93.0 1.15 24.72 S, CN
Motors
25 3600 256TC B199746.00 D 3,082 C256T34DK10 295 230/460 59.5 91.7 1.15 24.72 S, CN
25 3600 256TC GT0264 √ 3,082 256TTDBD6003 290 230/460 59.5 91.7 1.15 24.72 S, CN
25 1800 284TC 199747.00 D 3,569 C284T17DK5 508 230/460 62.0 93.6 1.15 25.71 C, CN
25 1800 284TC B199747.00 D 3,390 C284T17DK8 400 230/460 62.0 93.6 1.15 25.71 S, CN
25 1800 284TC GT0265 √ 3,390 284TTDBD6028 342 230/460 62.0 93.6 1.15 25.71 S, CN
25 1800 284TC GT2165 √ 3,390 284TTDBD6035 342 575 24.8 93.6 1.15 25.71 S, CN
Explosion Proof
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Motors
Tech Information
Drip-Proof - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
30 3600 284TSC 199748.00 D 3,990 C284T34DK3 485 230/460 66.5 91.7 1.15 24.41 C, CN
30 3600 284TSC B199748.00 D 3,790 C284T34DK6 370 230/460 71.5 91.7 1.15 24.34 S, CN
30 3600 284TSC GT0269 √ 3,790 284TSTDBD6003 370 230/460 71.5 91.7 1.15 24.34 S, CN
30 1800 286TC 199749.00 D 4,310 C286T17DK6 545 230/460 73.0 94.1 1.15 27.09 C, CN
30 1800 286TC B199749.00 D 4,094 C286T17DK9 460 230/460 72.5 94.1 1.15 27.09 S, CN
30 1800 286TC GT0267 √ 4,094 286TTDBD6028 448 230/460 72.5 94.1 1.15 27.09 S, CN
TEFC Motors
Single Phase
30 1800 286TC GT2167 √ 4,094 286TTDBD6035 448 575 29.0 94.1 1.15 27.09 S, CN
40 3600 286TSC 199750.00 D 4,790 C286T34DK3 529 230/460 89.0 92.4 1.15 25.79 C, CN
40 3600 286TSC B199750.00 D 4,637 C286T34DK6 529 230/460 93.0 92.4 1.15 25.72 S, CN
40 3600 286TSC GT0272 √ 4,637 286TSTDBD6003 529 230/460 93.0 92.4 1.15 25.72 S, CN
40 1800 324TC 199751.00 D 5,019 C324T17DK11 644 230/460 95.0 94.5 1.15 28.55 C, CN
40 1800 324TC B199751.00 D 5,019 C324T17DK14 482 230/460 95.5 94.1 1.15 28.55 S, CN
40 1800 324TC GT0273 √ 5,019 324TTDBD6028 482 230/460 95.5 94.5 1.15 28.55 S, CN
40 1800 324TC GT2173 √ 5,019 324TTDBD6035 482 575 38.2 94.5 1.15 28.55 S, CN
ODP Motors
Three Phase
50 3600 324TSC 199752.00 D 5,829 C324T34DK3 644 230/460 114.0 93.0 1.15 27.05 C, CN
50 3600 324TSC B199752.00 D 5,829 C324T34DK6 489 230/460 115.0 93.0 1.15 27.05 S, CN
50 3600 324TSC GT0276 √ 5,829 324TSTDBD6003 489 230/460 115.0 93.0 1.15 27.05 S, CN
50 1800 326TC 199753.00 D 5,773 C326T17DK5 700 230/460 118.0 94.5 1.15 29.73 C, CN
50 1800 326TC B199753.00 D 5,773 C326T17DK8 537 230/460 118.0 94.5 1.15 29.73 S, CN
50 1800 326TC GT0277 √ 5,773 326TTDBD6028 537 230/460 118.0 94.5 1.15 29.73 S, CN
50 1800 326TC GT2177 √ 5,773 326TTDBD6035 537 575 47.2 94.5 1.15 29.73 S, CN
TEFC Motors
Three Phase
60 3600 326TSC 199754.00 D 6,984 C326T34DK1 717 230/460 134.0 93.6 1.15 28.23 C, CN
60 3600 326TSC B199754.00 D 6,984 C326T34DK2 552 230/460 136.0 93.6 1.15 28.23 S, CN
60 3600 326TSC GT0280 √ 6,984 326TSTDBD6003 552 230/460 136.0 93.6 1.15 28.23 S, CN
60 1800 364TC 199755.00 D 7,743 C364T17DK5 925 230/460 139.0 95.0 1.15 31.69 C, CN
60 1800 364TC B199755.00 D 7,743 C364T17DK6 707 230/460 140.0 95.0 1.15 31.69 S, CN
60 1800 364TC GT0281 √ 7,743 364TTDBD6028 707 230/460 140.0 95.0 1.15 31.69 S, CN
75 3600 364TSC 199756.00 D 9,184 C364T34DK1 866 230/460 166.0 93.6 1.15 29.57 C, CN
Inverter Duty
75 3600 364TSC B199756.00 D 9,184 C364T34DK2 866 230/460 172.0 93.6 1.15 29.57 S, CN
Motors
75 3600 364TSC GT0283 √ 9,184 364TSTDBD6003 866 230/460 172.0 93.6 1.15 29.57 S, CN
75 1800 365TC 199816.00 D 8,159 C365T17DK3 1034 230/460 174.0 95.0 1.15 33.27 C, CN
75 1800 365TC B199816.00 D 8,159 C365T17DK5 810 230/460 172.0 95.0 1.15 33.27 S, CN
75 1800 365TC GT0284 √ 8,159 365TTDBD6028 810 230/460 172.0 95.0 1.15 33.27 S, CN
100 3600 365TSC 199758.00 D 11,235 C365T34DK1 983 230/460 222.0 93.6 1.15 31.14 C, CN
100 3600 365TSC B199758.00 D 11,235 C365T34DK2 758 230/460 227.0 93.6 1.15 31.14 S, CN
Severe Duty
100 3600 365TSC GT0286 √ 11,235 365TSTDBD6003 758 230/460 227.0 93.6 1.15 31.14 S, CN
Motors
100 1800 404TC 199759.00 D 11,040 C404T17DK3 1325 230/460 226.0 95.4 1.15 37.20 C, CN
100 1800 404TC B199759.00 D 11,040 C404T17DK4 1249 230/460 228.0 95.4 1.15 37.20 C, CN
100 1800 404TC GT0246 √ 11,040 404TTDCD6028 1249 230/460 228.0 95.4 1.15 37.20 C, CN
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Green items are Premium Efficient.
Explosion Proof
Stock
RPM NEMA® Catalog List Wgt. Amps Service % F.L. Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Factor Eff. (Inches) Notes
3 1800 182T 132232.00 √ 980 C182T17DB57 75 230/460 8.0 1.15 89.5 13.19 S, MX
5 1800 184T 132233.00 C/A 1,087 C184T17DB77 83 230/460 12.6 1.15 89.5 14.19 S, MX
7 1/2 1800 213T 140831.00 C/A 1,364 C213T17DB14 133 230/460 20.6 1.25 91.0 16.25 S, MX
Green items are Premium Efficient. Note listing on inside back flap.
C/A - Check Availability. Specifications are subject to change without notice.
TEFC Motors
Single Phase
General Specifications:
ODP Motors
Three Phase
• General purpose
• Automatic reset protection
• Not for use with variable frequency inverters
RPM NEMA Catalog List Wgt. load Amps @ Service % F.L. Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor Eff. (Inches) Notes
3 1800 182T 132234.00 √ 1,162 U182T17DB61 76 230/460 Auto 8.0 1.15 89.5 13.19 S, MX
5 1800 184T 132235.00 C/A 1,305 U184T17DB82 88 230/460 Auto 12.6 1.15 89.5 14.19 S, MX
Green items are Premium Efficient. Note listing on inside back flap
C/A - Check Availability. Specifications are subject to change without notice
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
50
your motor was built
to go the distance?
Regal has launched new and improved designs for the Globetrotter
series of motors.The redesigned Globetrotter motor now features:
www.regalbeloit.com
51
Creating a better tomorrow™...
Tech Information Three Phase Motors Totally Enclosed Ultimate e® /
Three Phase Motors – General Purpose – Totally Enclosed Globetrotter®
208-230/460V & 460V Rigid Mount – 1/4 HP – 400 HP
Steel Frame – Cast Iron Frame – Aluminum Frame
Motors Motors
see pages 66-74
Single Phase
ODP Motors
• Inverter-rated
• Class B insulation systems – 42, 48 and 56 frames
• Class F insulation system – 140 frame and higher
• Shielded ball bearings for direct coupled applications
(Contact your local sales office for belted load applications)
• Continuous duty
ODP Motors
Three Phase
Applications:
For use where exposure to water, dust and corrosives exists. Ideally suited for use on pumps,
Inverter Duty
compressors, fans, blowers, conveyors, machine tools and other industrial applications.
Motors
Options
C-Face Kits C-Face Kits
D-Flange Kits N/A
Encoder Mounting Provisions N/A
Blower Kit Option N/A
F-2 Mounting by re-assembly F-2 Mounting by re-assembly
Duty Motors
Automotive
Tech Information
Totally Enclosed Fan Cooled
General Purpose - Standard and
Premium Efficient - Three Phase Motors
Single Phase
ODP Motors
SYN App. F. L. “C”
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/4 1800 48 101646.00 √ 413 C4T17FB9 15 208-230/460 1.4 58.0 1.15 9.31 S, MX
1/4 1800 48 LM24929 √ 473 SPF4S0.25T61 14 230/460 1.3 62.0 1.15 9.59 S, MX
1/3 3600 48 102684.00 √ 415 C4T34FB5 21 208-230/460 1.4 68.0 1.00 8.81 S, US
1/3 1800 48 101647.00 √ 495 C4T17FB10 16 208-230/460 1.6 64.3 1.15 9.31 S, MX
TEFC Motors
Single Phase
1/3 1800 S56 101079.00 √ 454 C4T17FH6 22 208-230/460 1.6 64.3 1.15 9.69 S, MX
1/3 1800 S56 LM24107 C/A 486 SRF4S0.33T61 16 230/460 1.8 65.5 1.15 10.22 S, MX
1/3 1800 S56 103019.00 √ 663 C4T17FH12 24 208-230/460 1.3 77.0 1.25 10.19 S, MX, T
1/3 1200 56 110441.00 √ 714 C6T11FB5 26 208-230/460 1.6 65.0 1.15 10.48 S, US
1/2 3600 48 100905.00 √ 487 C4T34FB2 21 208-230/460 1.8 75.0 1.00 9.56 S, US
1/2 3600 56 LM24165 C/A 502 SRF2S0.5T61 26 230/460 2.2 66.0 1.15 11.82 S, US
1/2 1800 48 100961.00 √ 580 C4T17FB4 18 208-230/460 2.0 73.0 1.15 9.56 S, MX
1/2 1800 S56 100913.00 √ 519 C4T17FH1 18 208-230/460 2.0 73.0 1.15 9.94 S, MX
ODP Motors
Three Phase
1/2 1800 S56 LM24073 √ 555 SRF4S0.5T61 18 230/460 2.2 70.0 1.15 10.72 S, MX
1/2 1800 S56 103020.00 √ 703 C4T17FH13 27 208-230/460 1.8 77.0 1.25 10.69 S, MX, T
1/2 1200 56 110353.00 √ 769 C6T11FB2 29 208-230/460 2.4 70.0 1.15 10.98 S, US
1/2 1200 56 LM24105 √ 804 SRF6S0.5T61 25 230/460 2.7 68.0 1.15 11.82 S, MX
1/2 900 56 114618.00 √ 1,147 C6T8FB11 30 208-230/460 3.0 68.0 1.15 11.48 S, US
1/2 900 143T LM24291 C/A 1,197 SSF8S0.5T61 35 230/460 2.6 66.0 1.15 13.37 S, US
3/4 3600 48 100960.00 √ 535 C4T34FB3 24 208-230/460 2.4 77.0 1.00 9.81 S, US
TEFC Motors
Three Phase
3/4 3600 56 110313.00 √ 535 C6T34FB2 25 208-230/460 2.4 75.5 1.15 10.48 S, US
3/4 3600 56 LM24133 √ 555 SRF2S0.75T61 24 230/460 3.2 74.0 1.15 11.82 S, US
3/4 1800 56 110034.00 √ 553 C6T17FB1 25 208-230/460 2.8 77.0 1.15 10.48 S, US
3/4 1800 S56 LM24075 √ 597 SRF4S0.75T61 22 230/460 2.8 75.5 1.15 11.22 S, MX
3/4 1800 56 116739.00 √ 738 C6T17FB152 31 208-230/460 2.4 81.5 1.25 11.48 S, US, T
3/4 1200 56 110275.00 √ 769 C6T11FB3 36 208-230/460 3.0 75.5 1.15 11.48 S, US
3/4 1200 56 LM24136 C/A 823 SRF6S0.75T61 27 230/460 3.2 74.0 1.15 12.32 S, MX
Inverter Duty
3/4 1200 143T 121009.00 √ 785 C143T11FB2 31 208-230/460 3.0 75.5 1.15 12.43 S, US
Motors
3/4 1200 143T LM24103 √ 823 SSF6S0.75T61 32 230/460 3.2 74.0 1.15 12.37 S, MX
3/4 900 145T 121199.00 √ 1,323 C145T8FB5 41 208-230/460 3.2 72.0 1.15 12.68 S, US
3/4 900 145T LM24276 √ 1,370 SSF8S0.75T61 47 230/460 4.8 70.0 1.15 14.87 S, US
1 3600 56 110145.00 √ 625 C6T34FB1 24 230/460 3.2 77.0 1.15 10.48 S, US
1 3600 56 116129.00 √ 828 C6T34FB49 27 230/460 2.8 80.0 1.25 10.98 S, US, T
1 3600 56 LM34141 √ 756 SRF2B1T61 15 230/460 3.0 78.5 1.15 11.82 S, US
Severe Duty
1 1800 56H 116757.00 √ 908 C6T17FB151 32 230/460 3.2 85.5 1.25 12.48 S, US, T
Motors
1 1800 56 LM34139 √ 908 SRF4B1T61 42 230/460 3.3 85.5 1.15 14.33 S, MX
1 1800 143T 120921.00 √ 908 C143T17FB13 39 230/460 3.2 85.5 1.25 12.93 S, US, T
1 1800 143T LM32796 √ 897 SSF4B1T61 40 230/460 3.2 85.5 1.25 12.93 S, MX
1 1800 143T 171640.60 √ 1,002 C145T17FB25 61 230/460 3.2 85.5 1.15 13.46 C, CN, T
1 1800 143T LM24102 √ 997 CCN4BIT61 56 230/460 3.0 85.5 1.25 10.43 C, US
1 1200 56 119395.00 √ 894 C6T11FB28 40 208-230/460 3.8 82.5 1.15 12.98 S, US
Explosion Proof
1 1200 56H LM34140 √ 894 SRF6B1T61 48 230/460 3.8 82.5 1.15 15.33 S, MX
1 1200 145T 121520.00 √ 1,073 C145T11FB20 45 230/460 3.8 82.5 1.25 13.43 S, US, T
Motors
1 1200 145T LM33121 √ 1,028 SSF6B1T61 45 230/460 3.8 82.5 1.15 14.87 S, MX
1 1200 145T 171643.60 √ 1,179 C145T11FB25 58 208-230/460 3.6 82.5 1.25 13.46 C, CN, T
1 900 182T 132428.00 √ 1,710 C182T8FB14 40 230/460 4.2 75.5 1.15 12.97 S, MX
Continued on next page.
Shaded model numbers are cast iron frame.
Green items are Premium Efficient. Note listing on inside back flap.
Duty Motors
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1 1/2 3600 56 116758.00 √ 939 C6T34FB50B 33 230/460 4.0 84.0 1.25 11.98 S, US, T
1 1/2 3600 143T 121518.00 √ 939 C143T34FB1 40 230/460 4.0 84.0 1.25 12.93 S, US, T
1 1/2 3600 143T LM33122 √ 939 SSF2B1.5T61 39 230/460 4.0 84.0 1.25 13.37 S, US
1 1/2 3600 143T 171642.60 √ 1,037 C143T34FB5 49 230/460 4.0 84.0 1.15 13.46 C, CN, T
TEFC Motors
Single Phase
1 1/2 1800 56 116759.00 √ 927 C6T17FB150 43 230/460 4.8 86.5 1.25 12.98 S, US, T
1 1/2 1800 56H LM34142 √ 927 SRF4B1.5T61 40 230/460 4.6 86.5 1.15 14.83 S, MX
1 1/2 1800 145T 120922.00 √ 943 C145T17FB33 48 230/460 4.8 86.5 1.15 13.43 S, US, T
1 1/2 1800 145T LM33123 √ 943 SSF4B1.5T61 49 230/460 4.8 86.5 1.25 13.43 S, MX
1 1/2 1800 145T 171646.60 √ 1,034 C145T17FB78 69 208-230/460 4.8 87.5 1.15 13.46 C, CN, T
1 1/2 1800 145T LM34263 √ 1,118 CCF4B1.5T61 66 230/460 4.6 86.5 1.00 13.99 C, US
1 1/2 1200 182T 131980.00 √ 1,563 C182T11FB9 89 230/460 5.6 87.5 1.15 14.46 S, MX, T
ODP Motors
Three Phase
1 1/2 1200 182T LM33561 √ 1,318 AAF6B1.5T61AP26 73 230/460 5.2 87.5 1.25 14.96 A, MX
1 1/2 900 184T 132429.00 √ 2,033 C184T8FB7 72 230/460 5.7 78.9 1.15 14.96 S, MX
1 1/2 900 184T LM33562 √ 1,928 AAF8P1.5T61AP26 80 230/460 5.7 78.9 1.15 14.96 A, MX
2 3600 56 116760.00 √ 1,027 C6T34FB51 44 230/460 4.8 86.5 1.25 12.98 S, US, T
2 3600 145T 121519.00 √ 1,027 C145T34FB33 47 230/460 4.8 86.5 1.25 13.43 S, US, T
2 3600 145T LM33124 √ 1,027 SSF2BT61 44 230/460 4.8 85.5 1.25 13.43 S, US
2 3600 145T 171648.60 √ 1,130 C145T34FB37 56 230/460 4.8 85.5 1.15 13.46 C, CN, T
2 1800 56H LM34144 √ 981 SRF4B2T61 45 230/460 6.0 86.5 1.15 15.33 S, MX
TEFC Motors
Three Phase
2 1800 56H 116761.00 √ 981 C6T17FB154 45 230/460 5.8 86.5 1.25 13.48 S, US, T
2 1800 145T 120923.00 √ 981 C145T17FB32 48 230/460 5.8 86.5 1.25 14.43 S, US, T
2 1800 145T LM33125 √ 848 SSF4B2T61 47 230/460 6.5 86.5 1.15 13.93 S, MX
2 1800 145T 171647.60 √ 1,077 C145T17FB79 68 208-230/460 6.0 86.5 1.15 13.46 C, CN, T
2 1800 145T LM34264 √ 1,119 CCF4B2T61 69 230/460 6.0 86.5 1.15 13.99 C, US
2 1200 184T 131981.00 √ 1,592 C184T11FB20 92 230/460 6.4 88.5 1.15 14.96 S, MX, T
2 1200 184T LM33563 √ 1,367 AAF6B2T61AP26 80 230/460 6.4 88.5 1.25 14.96 A, MX
Inverter Duty
2 900 213T 141312.00 C/A 2,674 C213T8FB4 125 208-230/460 7.6 86.5 1.15 20.23 S, MX
Motors
2 900 213T LM34145 √ 2,710 AF8B2T61 142 230/460 10.0 86.5 1.15 18.84 A, US
3 3600 56H 119396.00 √ 1,099 C6T34FB54 45 230/460 8.0 86.5 1.15 13.48 S, US, 6, T
3 3600 145T 121968.00 √ 1,185 C145T34FB49 48 230/460 8.0 86.5 1.15 13.93 S, US, T
3 3600 182T 131985.00 √ 1,275 C182T34FB72 66 230/460 7.8 86.5 1.25 13.46 S, MX, T
3 3600 182T LM33564 √ 1,623 AAF2B3T61AP26 61 230/460 7.8 86.5 1.25 14.96 A, MX
3 3600 182T LM33262 C/A 1,275 SSF2B3T61 60 230/460 7.8 86.5 1.25 13.46 S, MX, T
Severe Duty
3 1800 182T 131463.00 √ 1,108 C182T17FB32 83 230/460 7.8 89.5 1.15 13.96 S, MX, T
Motors
3 1800 182T LM33486 √ 1,174 AAF4B3T61AP26 77 230/460 7.8 89.5 1.25 14.96 A, MX
3 1800 182T LM32741 √ 1,108 SSF4B3T61 74 230/460 7.8 89.5 1.15 13.96 S, MX
3 1800 182T 171320.60 √ 1,279 C182T17FB42 108 208-230/460 8.3 90.2 1.15 16.14 C, CN, T
3 1200 213T 171378.60 √ 1,813 C213T11FB1 166 208-230/460 9.4 89.5 1.15 18.19 C, CN, T
3 1200 213T LM16030 √ 1,939 AF6B3T61 98 230/460 8.8 89.5 1.25 17.34 A, US
3 1200 213T LM34006 C/A 1,495 SSF6P3T61 113 230/460 8.8 89.5 1.15 18.73 S, MX
Explosion Proof
3 900 215T 825403.00 C/A 4,339 215TTFN16085 217 230/460 10.0 86.5 1.15 19.63 C, US
Motors
Tech Information
Totally Enclosed Fan Cooled
General Purpose - Premium Efficient - Three Phase Motors
Single Phase
ODP Motors
SYN App. F. L. “C”
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
5 3600 184T 131987.00 √ 1,425 C184T34FB20 88 230/460 12.0 88.5 1.25 14.96 S, MX, T
5 3600 184T LM33565 √ 1,740 AAF2BT61AP26 95 230/460 12.0 88.5 1.15 14.96 A, MX
5 3600 184T LM15869 C/A 1,817 CCF2BT61 118 230/460 11.8 89.5 1.15 15.81 C, US
5 1800 184T 131464.00 √ 1,219 C184T17FB42 87 230/460 12.6 89.5 1.15 14.96 S, MX, T
TEFC Motors
Single Phase
5 1800 184T LM33487 √ 1,372 AAF4B5T61AP26 85 230/460 12.6 89.5 1.25 14.96 A, MX
5 1800 184T 171322.60 √ 1,331 C184T17FB43 112 208-230/460 12.8 89.5 1.15 16.80 C, CN, T
5 1200 215T 171379.60 √ 2,019 C215T11FB1 176 208-230/460 14.4 89.5 1.15 19.61 C, CN, T
5 1200 215T LM16033 √ 2,248 AF6B5T61 138 230/460 13.8 89.5 1.25 18.84 A, US
5 1200 215T LM32802 √ 1,937 SSF6BT61 150 230/460 14.0 90.2 1.25 20.23 S, US
5 900 254T G151355.22 √ 4,669 C254T8FB5 188 208-230/460 14.4 88.3 1.15 23.19 C, CA
5 900 254T LM32803 √ 3,189 AF8P5T61 187 230/460 15.0 87.5 1.15 23.40 A, US
7 1/2 3600 213T 170158.60 √ 1,872 C213T34FB42 156 208-230/460 15.0 91.0 1.15 18.19 C, CN, T
ODP Motors
Three Phase
7 1/2 3600 213T LM28968 √ 2,056 AF2B7.5T61 98 230/460 17.8 90.2 1.25 18.84 A, US
7 1/2 3600 213T 140756.00 √ 1,719 C213T34FB1 156 230/460 17.8 90.2 1.15 19.84 S, MX, T
7 1/2 1800 213T 140450.00 √ 1,565 C213T17FB6 153 230/460 21.6 91.7 1.25 18.70 S, MX, T
7 1/2 1800 213T LM32805 √ 1,446 SSF4B7.5T61 129 230/460 19.4 91.7 1.25 20.23 S, US
7 1/2 1800 213T LM16029 √ 2,160 AF4B7.5T61 102 230/460 19.2 91.1 1.25 18.84 A, US
7 1/2 1800 213T 170157.60 √ 1,779 C213T17FB43 158 208-230/460 18.6 91.7 1.15 18.19 C, CN, T
7 1/2 1800 213T LM24209 √ 1,844 CCF4B7.5T61 180 230/460 19.2 91.7 1.25 19.70 C, US
TEFC Motors
Three Phase
7 1/2 1200 254T 170122.60 √ 2,630 C254T11FB3 259 208-230/460 22.2 91.7 1.15 23.19 C, CN, T
7 1/2 1200 254T LM15672 √ 3,303 AF6B7.5T61 209 230/460 19.8 91.0 1.25 23.40 A, US
7 1/2 900 256T G151356.22 √ 5,564 C256T8FB42 300 208-230/460 20.0 87.7 1.15 24.92 C, CA
7 1/2 900 256T LM32807 √ 3,772 AF8B7.5T61 265 230/460 23.0 86.5 1.15 25.15 A, US
10 3600 215T 140755.00 √ 1,995 C215T34FB11 170 230/460 23.6 91.7 1.15 21.09 S, MX, T
10 3600 215T LM32808 √ 2,164 SSF2B10T61 172 230/460 23.6 91.7 1.15 21.48 S, US
10 3600 215T 170159.60 √ 2,217 C215T34FB47 181 208-230/460 23.0 91.7 1.15 19.61 C, CN, T
Inverter Duty
10 3600 215T LM16031 √ 2,276 AF2B10T61 185 230/460 23.6 91.7 1.25 19.84 A, US
Motors
10 1800 215T 140451.00 √ 1,893 C215T17FB18 161 230/460 26.8 91.7 1.25 19.70 S, MX, T
10 1800 215T LM32809 √ 1,784 SSF4B10T61 168 230/460 26.0 91.7 1.25 21.48 S, US
10 1800 215T 170140.60 √ 2,124 C215T17FB43 196 208-230/460 25.0 91.7 1.15 19.61 C, CN, T
10 1800 215T LM16032 √ 2,290 AF4B10T61 160 230/460 25.0 91.7 1.25 18.84 A, US
10 1200 256T 170123.60 √ 3,763 C256T11FB4 310 208-230/460 28.8 91.7 1.15 24.92 C, CN, T
10 1200 256T LM15675 √ 3,882 AF6B10T61 236 230/460 26.2 91.0 1.25 25.15 A, US
10 900 284T G150282.22 √ 6,463 C284T8FB2 346 208-230/460 30.0 90.2 1.15 26.26 C, CA
Severe Duty
Motors
15 3600 215T 170615.60 √ 2,787 C215T34FB13 223 208-230/460 35.0 91.7 1.15 19.61 C, CN, T
15 3600 254T 170062.60 √ 3,012 C254T34FB4 292 208-230/460 34.5 92.4 1.15 23.19 C, CN, T
15 3600 254T LM15670 √ 3,120 AAF2B15T61 215 230/460 35.0 91.7 1.25 23.40 A, US
15 1800 254T 170066.60 √ 2,874 C254T17FB10 290 208-230/460 37.0 92.4 1.15 23.19 C, CN, T
15 1800 254T LM15671 √ 2,759 AAF4B15T61 209 230/460 37.5 92.4 1.25 23.40 A, US
15 1800 254T LM24208 √ 3,119 CCF4B15T61 322 230/460 37.5 92.4 1.25 23.52 C, US
Explosion Proof
15 1200 284T 170068.60 √ 5,163 C284T11FB4 380 208-230/460 40.5 92.4 1.15 26.26 C, CN, T
15 900 286T G150261.22 √ 7,101 G150261.22 480 208-230/460 40.0 91.0 1.15 27.83 C, CA
Motors
20 3600 256T 170033.60 √ 3,682 C256T34FB10 332 208-230/460 46.0 92.4 1.15 24.92 C, CN, T
20 3600 256T LM15673 √ 3,638 AF2B0T61 325 230/460 47.0 92.4 1.25 25.15 A, US
20 1800 256T 170007.60 √ 3,596 C256T17FB4 332 208-230/460 50.0 93.0 1.15 24.92 C, CN, T
20 1800 256T LM15674 √ 3,462 AAF4B20T61 295 230/460 48.0 93.0 1.25 25.15 A, US
20 1200 286T 170001.60 √ 6,456 C286T11FB6 406 208-230/460 54.0 91.7 1.15 27.83 C, CN, T
20 900 324T G150263.22 C/A 8,538 C324T8FB3 640 208-230/460 54.0 91.0 1.15 29.53 C, CA
Duty Motors
Automotive
Shaded model numbers are cast iron frame. Continued on next page.
Green items are Premium Efficient. Note listing on inside back flap.
C/A - Check Availability. Specifications are subject to change without notice.
Note T - N/C T-stats
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
25 3600 284TS 170035.60 √ 4,788 C284T34FB5 393 208-230/460 56.5 93.0 1.15 24.88 C, CN, T
25 3600 284TS LM13960 √ 5,525 AF2B25TS61Y 385 230/460 56.0 92.4 1.25 25.25 A, US
25 3600 284T LM32811 C/A 5,525 AF2B25T61Y 433 230/460 56.0 92.4 1.25 26.38 A, US
25 1800 284T 170011.60 √ 4,521 C284T17FB5 395 208-230/460 58.5 93.0 1.15 27.83 C, CN, T
TEFC Motors
Single Phase
25 1800 284T LM13961 √ 4,697 AF4B25T61Y 495 230/460 64.0 93.6 1.25 26.62 A, US
25 1200 324T 170003.60 √ 7,556 C324T11FB3 555 208-230/460 66.0 93.6 1.15 29.53 C, CN, T
25 900 326T G150265.22 C/A 9,956 C326T8FB2 700 208-230/460 63.0 90.3 1.15 31.02 C, CA
30 3600 286TS 170037.60 √ 5,652 C286T34FB4 423 208-230/460 67.6 93.0 1.15 24.88 C, CN, T
30 3600 286T LM32813 √ 6,029 AF2B30T61Y 438 230/460 66.0 92.4 1.25 28.12 A, US
30 1800 286T 170015.60 √ 5,268 C286T17FB5 442 208-230/460 70.0 94.1 1.15 27.83 C, CN, T
30 1800 286T LM13964 √ 5,391 AF4B30T61Y 426 230/460 75.0 93.6 1.25 28.12 A, US
30 1200 326T 170005.60 √ 8,480 C326T11FB3 624 208-230/460 77.0 93.6 1.15 31.02 C, CN, T
ODP Motors
Three Phase
40 3600 324TS 170039.60 √ 7,048 C324T34FB3 510 208-230/460 90.0 92.4 1.15 28.03 C, CN, T
40 3600 324T LM32671 C/A 9,663 SF2B40T61Y 535 230/460 88.0 93.6 1.25 28.50 S, US
40 1800 324T 170019.60 √ 6,998 C324T17FB5 539 208-230/460 92.0 94.1 1.15 29.53 C, CN, T
40 1800 324T LM13699 √ 11,605 SF4B40T61Y 504 230/460 101.0 94.1 1.25 28.50 S, US
40 1800 324TS LM32686 C/A 11,605 SF4B40TS61Y 518 230/460 101.0 94.1 1.25 27.00 S, US
40 1200 364T 170096.60 √ 11,624 C364T11FB4 788 208-230/460 102.0 94.1 1.15 32.32 C, CN, T
50 3600 326TS 170041.60 √ 8,561 C326T34FB4 564 208-230/460 112.0 94.1 1.15 29.53 C, CN, T
TEFC Motors
Three Phase
50 3600 326T LM32669 C/A 11,530 SF2B50T61Y 480 230/460 111.0 94.1 1.25 30.00 S, US
50 1800 326T 170023.60 √ 8,451 C326T17FB7 597 208-230/460 117.0 94.5 1.15 31.02 C, CN, T
50 1800 326T LM13701 √ 11,464 SF4B50T61Y 585 230/460 127.0 94.5 1.25 30.00 S, US
50 1800 326TS LM32815 C/A 11,464 SF4B50TS61Y 570 230/460 127.0 94.5 1.25 34.50 S, US
50 1200 365T 170097.60 √ 13,951 C365T11FB5 682 208-230/460 126.0 94.1 1.15 33.31 C, CN, T
60 3600 364TS 170043.60 √ 12,696 C364T34FB3 758 208-230/460 136.0 94.1 1.15 30.20 C, CN, T
60 1800 364T 170027.60 √ 12,019 C364T17FB6 899 208-230/460 139.0 95.4 1.15 32.32 C, CN, T
Inverter Duty
60 1800 364T LM14809 √ 15,491 SF4B60T61Y 765 230/460 144.0 95.0 1.25 31.90 S, US
Motors
60 1200 404T 170098.60 √ 16,455 C404T11FB3 1035 208-230/460 142.0 94.5 1.15 36.42 C, CN, T
75 3600 365TS 170045.60 √ 15,553 C365T34FB3 800 208-230/460 169.0 94.5 1.15 31.18 C, CN, T
75 1800 365T 170031.60 √ 15,001 C365T17FB4 1028 208-230/460 171.0 95.8 1.15 33.31 C, CN, T
75 1800 365T LM14811 √ 15,513 SF4B75T61Y 822 230/460 178.0 95.4 1.15 32.90 S, US
75 1800 365TS LM32672 √ 15,513 SF4B75TS61Y 840 230/460 178.0 95.4 1.15 30.77 S, US
75 1200 405T 170099.60 √ 17,345 C405T11FB5 995 208-230/460 176.0 95.0 1.15 37.91 C, CN, T
100 3600 405TS 170160.60 √ 19,150 C449T11FB1 975 208-230/460 248.0 95.0 1.15 34.92 C, CN, T
Severe Duty
Motors
100 1800 405T 170087.60 √ 18,652 C405T17FB4 1090 208-230/460 225.0 95.4 1.15 37.91 C, CN, T
100 1800 405T LM13940 √ 18,740 SF4B100T61Y 1002 230/460 236.0 95.4 1.15 38.40 S, US
100 1800 405TS LM32819 √ 18,740 SF4B100TS61Y 1052 230/460 244.0 95.4 1.15 35.40 S, US
100 1200 444T 170256.60 √ 26,049 C444T11FB6 1457 460 121.0* 95.0 1.25 42.87 C, CN, T
Green items are Premium Efficient. Note listing on inside back flap.
C/A - Check Availability. Specifications are subject to change without notice.
Motors
Tech Information
Totally Enclosed Fan Cooled
General Purpose - Premium Efficient - Three Phase Motors
Single Phase
ODP Motors
SYN App. F. L. “C”
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 460 V Eff. Factor (Inches) Notes
125 3600 444TS 171580.60 √ 22,865 C444T34FB8 1373 460 136 95.4 1.25 39.10 C, CN, T
125 1800 444T 170369.60 √ 24,765 C444T17FB5 1576 460 137 95.4 1.15 42.87 C, CN, T
125 1800 444T LM13704 √ 25,053 SF4B125T64Y 1326 460 146 96.2 1.15 41.58 S, US
125 1800 444TS LM32820 C/A 25,053 SF4B125TS64Y 1590 460 146 96.2 1.15 37.83 S, US
TEFC Motors
Single Phase
125 1200 445T 170260.60 √ 27,896 C445T11FB5 1596 460 155 95.4 1.15 44.88 C, CN, T
150 3600 445TS 171578.60 √ 28,220 C445T34FB3 1529 460 163 95.0 1.15 41.11 C, CN, T
150 1800 445T 170371.60 √ 28,335 C445T17FB8 1627 460 164 95.8 1.15 44.88 C, CN, T
150 1800 445T LM13707 √ 29,059 SF4B150T64Y 1531 460 168 96.2 1.15 43.58 S, US
150 1800 445TS LM32679 C/A 29,059 SF4B150TS64Y 1490 460 168 96.2 1.15 39.49 S, US
150 1200 447T 171315.60 √ 31,457 C447T11FB1 2230 460 186 96.2 1.15 48.05 C, CN, T
200 3600 447TS 171579.60 √ 32,502 C447T34FB3 2100 460 216 95.4 1.25 44.33 C, CN, T
200 3600 445TS LM13709 C/A 45,554 SF2B200TS64Y 1531 460 211 95.4 1.15 39.49 S, US
ODP Motors
Three Phase
200 1800 447T 170352.60 √ 32,453 C447T17FB8 2785 460 219 96.2 1.15 48.05 C, CN, T
200 1800 445T LM13710 √ 35,937 SF4B200T64Y 1531 460 227 96.2 1.15 43.58 S, US
200 1200 449T 171316.60 √ 41,204 C449T11FB1 2542 460 241 96.2 1.15 52.80 C, CN, T
200 1200 449T LM13711 C/A 41,658 SF6B200T64Y 1812 460 260 95.8 1.15 52.08 S, US
250 3600 449TS LM16222 C/A 45,757 SF2P250TS64Y 2185 460 263 95.8 1.15 47.99 S, US
250 3600 447TS LM13712 C/A 45,757 SF2B250TS64Y 1812 460 264 95.8 1.15 42.99 S, US
250 1800 449T 171516.60 √ 37,539 C449T17FB11 2515 460 270 96.5 1.15 53.14 C, CN, T
TEFC Motors
Three Phase
250 1800 447T LM13713 C/A 45,246 SF4B250T64Y 1812 460 282 95.4 1.15 47.08 S, US
250 1200 449T LM34573 C/A 44,823 CC6B250T64Y 3558 460 300 95.8 1.15 51.85 C, US
300 3600 449TS LM13715 C/A 68,510 SF2B300TS64Y 2185 460 314 95.8 1.15 47.99 S, US
300 1800 449T 171529.60 √ 42,259 C449T17FB12 2593 460 325 96.2 1.15 53.07 C, CN, T
300 1800 447/449T LM17956 √ 49,530 S449F4B300T64Y 2185 460 337 96.2 1.15 52.08 S, US
300 1800 449TS LM34098 C/A 49,530 SF4B300TS64Y 2235 460 337 96.2 1.15 47.99 S, US
350 3600 449TS LM13719 C/A 74,600 SFB350TS64Y 2185 460 370 95.8 1.15 47.99 S, US
Inverter Duty
350 1800 449T 171530.60 √ 43,583 C449T17FB13 2732 460 390 96.2 1.15 53.07 C, CN, T
Motors
350 1800 449T LM34528 C/A 47,078 CCF4B350T64PYGB 2990 460 395 96.2 1.15 52.07 C, US
400 3600 449TS LM34555 C/A 53,753 CCF2B400TS64YE3 2733 460 435 95.8 1.00 52.96 C, US
400 1800 449T LM33803 C/A 61,759 CCF4B400T64YE3 3558 460 460 96.5 1.15 56.71 C, US
Severe Duty
Note T - N/C T-stats
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/6 1800 48CZ 102662.00 √ 396 C4T17FC31 16 208-230/460 0.7 71.0 1.00 9.44 S, MX
1/4 3600 48CZ 101965.00 √ 518 C4T34NC11 16 208-230/460 1.0 67.0 1.00 8.81 S, US 12
1/4 1800 48CZ 101966.00 √ 448 C4T17NC35 20 208-230/460 0.9 78.0 1.15 9.31 S, MX 12
1/4 1800 48CZ 101981.00 √ 448 C4T17FC19 15 208-230/460 1.4 58.0 1.15 8.94 S, MX
TEFC Motors
Single Phase
1/4 1800 S56C 101648.00 √ 439 C4T17NC28 17 208-230/460 0.9 78.0 1.15 9.56 S, MX 12
1/4 1800 S56C 101767.00 √ 439 C4T17FC9 18 208-230/460 1.4 58.0 1.15 9.69 S, MX
1/4 1800 56C LM24964 √ 465 SRF4S0.25TCN61 14 230/460 1.1 71.0 1.15 11.32 S, US
1/3 3600 56C 110446.00 √ 437 C6T34NC2 23 208-230/460 1.1 77.0 1.15 9.90 S, US 12
1/3 1800 48CZ 102664.00 √ 456 C4T17FC30 16 208-230/460 1.6 64.3 1.15 9.19 S, MX
1/3 1800 S56C 101769.00 √ 471 C4T17FC10 16 208-230/460 1.6 64.3 1.15 9.69 S, MX
1/3 1800 S56C LM24093 √ 503 SRF4S0.33TCN61 16 230/460 1.6 65.5 1.15 10.19 S, MX
1/3 1800 S56C 102863.00 √ 483 C4T17NC47 19 208-230/460 1.3 77.0 1.15 9.56 S, MX 12
ODP Motors
Three Phase
1/3 1800 S56C 102696.00 √ 661 C4T17FC33 20 208-230/460 1.3 77.0 1.25 10.19 S, MX, T
1/3 1200 48C 101291.00 √ 735 C4T11NC1 23 208-230/460 1.6 73.0 1.00 9.31 S, MX
1/3 1200 56C 113311.00 √ 735 C6T11FC16 21 208-230/460 1.6 65.0 1.15 10.48 S, US
1/3 1200 56C LM24858 √ 835 SRF6S0.33TCN61 21 230/460 2.2 62.0 1.15 11.32 S, MX
1/2 3600 48C 100449.00 √ 509 C4T34NC4 22 208-230/460 1.6 75.5 1.00 9.81 S, US 12
1/2 3600 56C 110144.00 √ 509 C6T34NC1 28 208-230/460 1.6 82.5 1.15 10.40 S, US 12
1/2 3600 56C 114176.00 √ 509 C6T34FC42 20 208-230/460 2.0 72.0 1.15 9.98 S, US
TEFC Motors
Three Phase
1/2 1800 48CZ 100486.00 √ 575 C4T17NC11 23 208-230/460 1.6 78.0 1.00 10.31 S, MX 12
1/2 1800 48CZ 102666.00 √ 550 C4T17FC32 24 208-230/460 2.0 73.0 1.15 9.69 S, MX
1/2 1800 S56C 102861.00 √ 573 C4T17NC46 20 208-230/460 1.8 77.0 1.15 10.06 S, MX 12
1/2 1800 S56C 102860.00 √ 550 C4T17FC40 18 208-230/460 2.0 73.0 1.15 10.19 S, MX
1/2 1800 S56C LM24083 √ 614 SRF4S0.5TCN61 18 230/460 2.2 70.0 1.15 10.69 S, MX
1/2 1800 S56C 101780.00 √ 708 C4T17FC12 21 208-230/460 1.8 77.0 1.15 10.69 S, MX, T
1/2 1200 56C 110163.00 √ 795 C6T11FC1 28 208-230/460 2.4 70.0 1.15 10.98 S, US
Inverter Duty
1/2 1200 56C LM24128 √ 828 SRF6S0.5TCN61 27 208-230/460 2.7 68.0 1.15 11.82 S, MX
Motors
1/2 900 143TC LM24965 C/A 1,260 SSF8S0.5TCN61 35 230/460 2.6 66.0 1.15 13.37 S, US
3/4 3600 56C 110448.00 √ 535 C6T34FC9 21 208-230/460 2.4 75.5 1.15 10.48 S, US
3/4 3600 56C LM24151 C/A 555 SRF2S0.75TCN61 23 230/460 3.2 74.0 1.15 11.82 S, US
3/4 1800 56C 110047.00 √ 595 C6T17FC1 24 208-230/460 2.8 77.0 1.15 10.48 S, US
3/4 1800 S56C LM24077 √ 639 SRF4S0.75TCN61 21 230/460 2.8 75.5 1.15 11.19 S, MX
3/4 1800 56C 114213.00 √ 762 C6T17FC114 29 208-230/460 2.4 81.5 1.15 10.98 S, MX, T
3/4 1200 143TC 120097.00 √ 832 C143T11FC1 36 208-230/460 3.0 75.5 1.15 11.92 S, US
Severe Duty
Motors
3/4 1200 56C 112378.00 √ 832 C6T11FC10 32 208-230/460 3.0 75.5 1.15 11.48 S, US
3/4 900 145TC LM24967 C/A 1,436 SSF8S0.75TCN61 47 230/460 4.2 70.0 1.15 14.87 S, US
Green items are Premium Efficient. Continued on next page.
C/A - Check Availability.
Note 12 - TENV. Note listing on inside back flap.
Note T - N/C T-stats Specifications are subject to change without notice.
Explosion Proof
Motors
Duty Motors
Automotive
Tech Information
Totally Enclosed - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1 3600 56C 110112.00 √ 627 C6T34FC6 24 230/460 3.2 77.0 1.15 10.48 S, US
1 3600 56C 116748.00 √ 848 C6T34FC97 25 230/460 2.8 80.0 1.25 10.98 S, US, T
1 1800 56C LM34158 √ 1,059 SRF3B1TCN61 42 230/460 3.3 85.5 1.15 14.15 S, MX
1 1800 56C 114638.00 √ 1,059 C6T17FC132 37 230/460 3.4 85.5 1.15 12.48 S, US, T
1 1800 143TC LM34159 C/A 1,059 SSF4B1TCN61 42 230/460 3.3 85.5 1.25 14.21 S, MX
1 1800 143TC 121067.00 √ 1,059 C143T17FC16 39 230/460 3.4 85.5 1.15 12.92 S, US, T
TEFC Motors
Single Phase
1 1200 56C 116749.00 √ 1,114 C6T11FC29 47 230/460 3.8 82.5 1.25 12.98 S, US, T
1 1200 56C LM34162 √ 1,114 SRF6B1TCN61 39 230/460 3.8 82.5 1.15 15.15 S, MX
1 1200 145TC 122165.00 √ 1,114 C145T11FC12 46 208-230/460 3.8 82.5 1.15 13.42 S, US
1 1200 145TC LM32846 C/A 1,061 SSF6B1TCN61 48 230/460 3.6 82.5 1.15 14.37 S, US
1 1/2 3600 56C 116750.00 √ 963 C6T34FC98C 33 230/460 4.0 84.0 1.25 11.98 S, US, T
1 1/2 3600 143TC 122166.00 √ 963 C143T34FC22 35 208-230/460 4.0 84.0 1.15 12.42 S, US
1 1/2 1800 56C 116743.00 √ 1,117 C6T17FC209 41 230/460 4.8 86.5 1.25 12.98 S, US, T
1 1/2 1800 56C LM34161 √ 1,117 SRF4B1.5TCN61 44 230/460 4.6 86.5 1.15 14.65 S, MX
ODP Motors
Three Phase
1 1/2 1800 145TC 121066.00 √ 1,117 C145T17FC37 44 230/460 4.8 86.5 1.15 13.42 S, US, T
1 1/2 1800 145TC LM34154 √ 1,117 SSF4B1.5TCN61 44 230/460 4.6 86.5 1.15 14.71 S, MX
1 1/2 1200 56C 132596.00 √ 1,637 C182T11FC7 75 230/460 6.0 87.5 1.15 13.02 S, MX, ♦
1 1/2 1200 182TC 132431.00 √ 1,637 C182T11FC113 75 208-230/460 5.2 87.5 1.15 14.47 S, MX
2 3600 56C 116751.00 √ 1,114 C6T34FC94 44 230/460 4.8 85.5 1.25 12.98 S, US
2 3600 56C LM34163 √ 1,114 SRF2B2TCN61 44 230/460 5.2 86.5 1.15 14.32 S, US
2 3600 145TC 122167.00 √ 1,114 C145T34FC44 41 208-230/460 4.8 85.5 1.15 13.42 S, US
TEFC Motors
Three Phase
2 3600 145TC LM34160 C/A 1,114 SSF2B2TCN61 48 230/460 5.0 85.5 1.15 14.37 S, US
2 1800 56C 116744.00 √ 1,173 C6T17FC210 45 230/460 5.8 86.5 1.25 13.48 S, US
2 1800 56C LM34155 √ 1,173 SRF4B2TCN61 47 230/460 6.0 86.5 1.15 15.10 S, MX
2 1800 145TC 121065.00 √ 1,173 C145T17FC38 46 230/460 5.8 86.5 1.25 13.92 S, US
2 1800 145TC LM34153 √ 1,274 SSF4B2TCN61 48 230/460 6.0 86.5 1.25 15.21 S, MX
2 1200 184TC 132430.00 √ 1,661 C184T11FC112 82 230/460 6.4 88.5 1.15 14.97 S, MX
3 3600 56C 119414.00 √ 1,219 C6T34FC123 45 208-230/460 8.0 86.5 1.15 13.86 S, US
Inverter Duty
3 3600 145TC 122171.00 √ 1,219 C145T34FC45 47 208-230/460 8.0 86.5 1.15 13.92 S, US
Motors
3 3600 145TC LM34165 √ 1,219 SSF2B3TCN61 49 230/460 7.6 85.5 1.15 13.42 S, US
3 3600 182TC 132433.00 √ 1,384 C182T34FC7 60 208-230/460 7.8 86.5 1.15 12.97 S, MX
3 1800 56C 132595.00 √ 1,258 C182T17FC47 75 230/460 7.8 89.5 1.15 12.52 S, MX, ♦
3 1800 182TC 131503.00 √ 1,258 C182T17FC26 75 230/460 7.8 89.5 1.15 13.97 S, MX
3 1800 182TC LM33574 D 1,027 AAF4P3TCN61AP26 73 230/460 7.8 87.5 1.25 14.96 A, MX
3 1800 182TC LM33573 √ 1,258 AAF4B3TCN61AP26 60 230/460 7.8 89.5 1.25 14.96 A, MX
Severe Duty
3 1800 182TC LM33337 D 962 SSF4P3TCN61 62 230/460 8.6 87.5 1.15 13.96 S, MX
Motors
3 1800 182TC LM34353 √ 1,258 SSF4B3TCN61 62 230/460 7.8 89.5 1.15 13.97 S, MX
3 1200 213TC 141231.00 √ 1,764 C215T11FC4 129 230/460 8.8 89.5 1.15 19.46 S, MX
5 3600 184TC 132434.00 √ 1,436 C184T34FC28 99 208-230/460 12.0 88.5 1.15 14.97 S, MX
5 1800 184TC 131501.00 √ 1,358 C184T17FC29 90 230/460 12.6 89.5 1.15 14.97 S, MX, T
5 1800 184TC LM33575 C/A 1,439 AAF4B5TCN61AP26 115 208-230/460 12.6 89.5 1.25 14.96 A, MX
5 1200 215TC 141232.00 √ 2,017 C215T11FC5 156 230/460 14.0 89.5 1.15 20.96 S, MX
Explosion Proof
♦ Note: Motor 132596.00 mounts like a NEMA 56 frame, having a barrel Note listing on inside back flap.
diameter of a 180 frame motor and uses 180 frame brake kit Specifications are subject to change without notice.
Note T - N/C T-stats
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
7 1/2 3600 184TC 132561.00 √ 1,546 C184T34FC32 102 230/460 17.6 89.5 1.00 15.97 S, MX
7 1/2 3600 213TC 141234.00 √ 1,756 C213T34FC1 158 230/460 18.6 89.5 1.00 19.46 S, MX
7 1/2 3600 213TC 171852.60 √ 1,797 C213T34FC44 157 230/460 18.0 91.0 1.15 18.86 C, CN, T
7 1/2 1800 213TC 140486.00 √ 1,579 C213T17FC7 165 230/460 21.6 91.7 1.25 18.71 S, MX, T
7 1/2 1800 213TC 171851.60 √ 1,699 C213T17FC43 165 230/460 18.6 91.7 1.15 18.85 C, CN, T
10 3600 215TC 141233.00 √ 1,780 215T34FC7 155 230/460 23.6 90.2 1.15 20.96 S, MX
TEFC Motors
Single Phase
10 3600 215TC 171854.60 √ 1,870 C215T34FC43 181 230/460 23.0 91.7 1.15 20.36 C, CN, T
10 1800 215TC 140484.00 √ 1,905 C215T17FC4 182 230/460 26.8 91.7 1.25 19.71 S, MX, T
10 1800 215TC 171853.60 √ 1,740 C215T17FC42 177 230/460 25.0 91.7 1.15 20.36 C, CN, T
10 1800 215TC LM34166 √ 2,288 AF4B10TCN61 178 230/460 26.6 91.7 1.25 19.63 A, US
15 3600 215TC 141235.00 C/A 2,531 C215T34FC8 135 230/460 35.0 91.0 1.15 20.96 S, MX
15 3600 215TC 171349.60 √ 3,226 C215T34FC45 186 230/460 35.0 91.7 1.15 23.19 C, CN, T
15 1800 254TC 171479.60 √ 3,346 C254T17FC6 280 230/460 36.0 92.4 1.25 23.80 C, CN, T
15 1800 254TC LM16828 C/A 3,228 AF4B15TCN61 210 230/460 37.5 92.4 1.25 24.02 A, US
ODP Motors
Three Phase
20 3600 256TC 171480.60 √ 3,935 C256T34FC7 322 230/460 46.0 92.4 1.15 24.92 C, CN, T
20 1800 256TC 171352.60 √ 4,017 C256T17FC5 335 230/460 49.0 93.0 1.15 25.50 C, CN, T
25 1800 284TC 171507.60 √ 5,132 C284T17FC6 385 230/460 59.0 93.6 1.15 26.26 C, CN, T
30 1800 286TC 171508.60 √ 6,119 C286T17FC6 432 230/460 70.0 94.1 1.15 26.26 C, CN, T
40 1800 324TC 171509.60 √ 8,066 C324T17FC6 528 230/460 92.0 94.1 1.15 29.53 C, CN, T
50 1800 326TC 171510.60 √ 8,844 C326T17FC6 587 230/460 117.0 94.5 1.15 31.02 C, CN, T
60 1800 364TC 171519.60 √ 10,549 C364T17FC10 879 208-230/460 139.0 95.4 1.15 32.64 C, CN, T
TEFC Motors
Three Phase
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Green items are Premium Efficient.
C/A - Check Availability.
Note T - N/C T-stats
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Tech Information
Totally Enclosed - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/4 1800 S56C LM24946 C/A 496 SRF4S0.25TC61 21 230/460 1.3 62.5 1.15 9.94 S, US
1/3 1800 S56C 102921.00 √ 528 C4T17NK3 20 208-230/460 1.3 77.0 1.15 9.56 S, MX,12
1/3 1800 S56C 102922.00 √ 526 C4T17FK11 22 208-230/460 1.3 77.0 1.15 10.19 S, MX
1/3 1800 S56C LM24114 C/A 548 SRF4S0.33TC61 16 230/460 1.6 65.5 1.15 10.19 S, MX
1/3 1800 S56C 102697.00 √ 672 C4T17FK5 20 208-230/460 1.3 77.0 1.25 10.19 S, MX, T
1/2 3600 56C 110182.00 C/A 575 C6T344NK1 29 208-230/460 1.6 82.5 1.15 9.90 S, MX,12
TEFC Motors
Single Phase
1/2 3600 56C 114142.00 √ 530 C6T34FK46 24 208-230/460 2.0 72.0 1.15 10.48 S, US
1/2 3600 56C LM24129 √ 568 SRF2S0.5TC61 26 230/460 2.2 66.0 1.15 11.81 S, US
1/2 1800 S56C 102919.00 √ 608 C4T17NK2 21 208-230/460 1.8 77.0 1.15 10.06 S, MX,12
1/2 1800 S56C 102917.00 √ 608 C4T17FK10 20 208-230/460 1.9 73.0 1.15 10.19 S, MX
1/2 1800 S56C LM24074 √ 616 SRF4S0.5TC61 19 230/460 2.2 70.0 1.15 10.69 S, MX
1/2 1800 S56C 102024.00 √ 724 C4T17FK2 26 208-230/460 1.8 77.0 1.15 10.69 S, MX
1/2 1200 56C 110914.00 √ 819 C6T11FK1 28 208-230/460 2.4 70.0 1.15 10.98 S, US
1/2 1200 56C LM24104 C/A 866 SRF6S0.5TC61 24 230/460 2.7 68.0 1.15 11.81 S, MX
ODP Motors
Three Phase
1/2 900 143TC LM24949 √ 1,260 SSF8S0.5TC61 36 230/460 2.6 66.0 1.15 13.37 S, US
3/4 3600 56C 110915.00 √ 572 C6T34FK6 22 208-230/460 2.4 75.5 1.15 10.48 S, US
3/4 3600 56C LM24134 √ 622 SRF2S0.75TC61 24 230/460 3.2 74.0 1.15 11.81 S, US
3/4 1800 56C 110916.00 √ 653 C6T17FK5 25 208-230/460 2.8 77.0 1.15 10.48 S, US
3/4 1800 S56C LM24076 √ 659 SRF4S0.75TC61 21 230/460 2.8 75.5 1.15 11.19 S, MX
3/4 1800 56C 114624.00 √ 778 C6T17FK58 28 208-230/460 2.4 81.5 1.25 11.23 S, US, T
3/4 1200 56C 116340.00 √ 857 C6T11FK12 32 208-230/460 3.0 75.5 1.15 11.48 S, US
TEFC Motors
Three Phase
3/4 1200 56C LM24140 √ 887 SRF6S0.75TC61 31 230/460 3.2 74.0 1.15 12.31 S, MX
3/4 1200 143TC 120485.00 √ 857 C143T11FK2 32 208-230/460 3.0 75.5 1.15 12.92 S, US
3/4 1200 143TC LM24273 C/A 887 SSF6S0.75TC61 30 230/460 3.2 74.0 1.15 12.37 S, MX
3/4 900 145TC LM24265 √ 1,436 SSF8S0.75TC61 52 230/460 4.8 70.0 1.15 14.37 S, US
1 3600 56C 110181.00 √ 679 C6T34FK1 24 230/460 3.2 77.0 1.15 10.48 S, US
1 3600 56C LM34169 √ 767 SRF2B1TC61 25 230/460 3.0 78.5 1.15 11.81 S, US
1 1800 56C 116745.00 √ 1,096 C6T17FK98 34 230/460 3.4 85.5 1.25 12.48 S, US, T
Inverter Duty
1 1800 56C LM34167 √ 1,096 SRF4B1TC61 43 230/460 3.3 85.5 1.15 14.15 S, MX
Motors
1 1800 143TC 121179.00 √ 1,096 C143T17FK9 37 230/460 3.2 85.5 1.15 12.92 S, US, T
1 1800 143TC LM32822 √ 926 SSF4B1TC61 41 230/460 3.2 85.5 1.25 12.93 S, US
1 1200 145TC 121936.00 √ 1,073 C145T11FK7 47 230/460 3.8 82.5 1.25 13.42 S, US, T
1 1200 56HC LM34168 √ 1,102 SRF6B1TC61 45 230/460 3.8 82.5 1.15 15.14 S, MX
1 1200 145TC LM32823 √ 1,102 SSF6B1TC61 48 230/460 3.8 82.5 1.25 14.87 S, US
1 900 182TC LM33566 C/A 1,766 AAF8B1TC61AP26 77 230/460 4.2 75.5 1.15 14.96 A, MX
Severe Duty
Green items are Premium Efficient. Continued on next page.
Motors
C/A - Check Availability.
Note T - N/C T-stats Note listing on inside back flap.
Specifications are subject to change without notice.
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1 1/2 3600 56C 119416.00 √ 980 C6T34FK131 32 208-230/460 4.0 84.0 1.15 11.98 S, US
1 1/2 3600 56C LM34171 √ 980 SRF2B1.5TC61 38 208-230/460 4.0 84.0 1.15 13.32 S, US
TEFC Motors
Single Phase
1 1/2 3600 143TC 121672.00 √ 1,003 C143T34FK15 33 230/460 4.0 84.0 1.25 12.92 S, US, T
1 1/2 1800 56C 116746.00 √ 1,136 C6T17FK96 43 230/460 4.8 86.5 1.25 12.99 S, US, T
1 1/2 1800 56HC LM34170 √ 1,136 SRF4B1.5TC61 75 230/460 4.6 86.5 1.15 14.65 S, MX
1 1/2 1800 145TC 121180.00 √ 1,136 C145T17FK26 45 230/460 4.8 86.5 1.15 13.42 S, US, T
1 1/2 1800 145TC LM32825 √ 968 SSF4B1.5TC61 41 230/460 4.6 86.5 1.15 14.37 S, US
1 1/2 1200 182TC 132435.00 √ 1,661 C182T11FC5 78 230/460 5.2 87.5 1.15 15.96 S, MX
1 1/2 1200 182TC LM33567 √ 1,308 AAF6B1.5TC61AP26 74 230/460 5.2 87.5 1.25 14.97 A, MX
ODP Motors
Three Phase
2 3600 56C 119417.00 √ 985 C6T34FK132 35 208-230/460 4.8 85.5 1.15 12.98 S, US, T
2 3600 56HC LM34173 √ 985 SRF2B2TC61 47 230/460 5.0 85.5 1.15 14.32 S, US
2 3600 145TC 121673.00 √ 1,027 C145T34FK39 44 230/460 4.8 85.5 1.25 13.42 S, US, T
2 1800 56HC 116747.00 √ 1,187 C6T17FK97 48 230/460 5.8 86.5 1.25 13.49 S, US, T
2 1800 56HC LM34172 √ 1,187 SRF4B2TC61 65 230/460 6.0 86.5 1.15 15.15 S, US
2 1800 145TC 121181.00 √ 1,187 C145T17FK27 49 230/460 5.8 86.5 1.25 13.92 S, US, T
2 1800 145TC LM32829 √ 1,049 SSF4B2TC61 48 230/460 6.0 86.5 1.15 14.37 S, MX
TEFC Motors
2 1200 184TC 132243.00 √ 1,354 C184T11FK6 82 230/460 6.4 88.7 1.15 14.97 S, US, T
Three Phase
2 1200 184TC LM33569 √ 1,446 AAF6B2TC61AP26 80 230/460 6.4 88.5 1.25 14.97 A, MX
2 900 213TC LM34174 C/A 2,781 AAF8B2TC61 147 230/460 8.0 86.5 1.15 19.57 A, US
3 3600 56HC 119418.00 √ 1,204 C6T34FK133 57 230/460 8.0 86.5 1.15 13.48 S, US
3 3600 145TC 121929.00 √ 1,261 C145T34FK43 49 230/460 8.0 86.5 1.15 13.92 S, US, T
3 3600 182TC 132079.00 √ 1,423 C182T34FK10 70 230/460 7.6 86.5 1.25 14.47 S, MX, T
3 3600 182TC 171564.60 C/A 1,514 C182T34FK14 97 208-230/460 7.2 87.5 1.15 16.76 C, CN, T
3 3600 182TC LM33570 √ 1,450 AAF2B3TC61AP26 61 230/460 7.8 86.5 1.25 14.97 A, MX
Inverter Duty
3 1800 182TC 131504.00 √ 1,280 C182T17FK14 84 230/460 7.8 89.5 1.15 13.97 S, MX, T
Motors
3 1800 182TC LM33485 √ 1,274 AAF4B3TC61AP26 67 230/460 7.8 89.5 1.25 14.97 A, MX
3 1800 182TC 171565.60 √ 1,469 C182T17FK27 125 208-230/460 8.0 90.2 1.15 16.93 C, CN, T
3 1200 215TC 140834.00 √ 1,831 C215T11FK9 170 230/460 8.8 89.5 1.15 20.97 S, MX
3 1200 213TC LM16744 √ 2,056 AF6B3TC61 131 230/460 8.8 89.5 1.25 19.45 S, MX
Green items are Premium Efficient. Note listing on inside back flap.
Motors
Tech Information
Totally Enclosed - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
5 3600 184TC 171446.60 √ 1,574 C184T34FK44 111 208-230/460 12.0 88.5 1.15 16.76 C, CN, T
5 3600 184TC 132080.00 √ 1,467 C184T34FK32 100 230/460 12.0 88.5 1.25 14.97 S, MX, T
5 3600 184TC LM16745 D 1,884 AAF2B5TC61 104 230/460 11.8 89.5 1.25 16.83 A, US
5 3600 184TC LM33571 √ 1,884 AAF2B5TC61AP26 104 230/460 12.0 88.5 1.25 14.97 A, MX
5 1800 184TC 171566.60 √ 1,525 C184T17FK35 109 208-230/460 12.8 89.5 1.15 16.93 C, CN, T
5 1800 184TC 131502.00 √ 1,388 C184T17FK15 96 230/460 12.6 89.5 1.15 14.97 S, MX, T
TEFC Motors
Single Phase
5 1800 184TC LM33484 √ 1,477 AAF4B5TC61AP26 85 230/460 12.6 89.5 1.25 14.97 A, MX
5 1200 215TC 171116.60 √ 2,347 C215T11FB11 180 208-230/460 14.0 89.5 1.15 20.35 C, CN, T
5 1200 215TC LM16748 √ 2,356 AF6B5TC61 150 230/460 13.8 89.5 1.25 19.57 A, US
5 1200 215TC LM32835 √ 2,069 SSF6B5TC61 143 230/460 14.0 90.2 1.25 20.97 S, MX
5 900 254TC LM32836 √ 3,371 AF8B5TC61 244 230/460 15.0 87.5 1.15 24.00 A, US
7 1/2 3600 184TC 132313.00 √ 1,594 C184T34FK48 103 230/460 17.6 89.5 1.15 15.97 S, MX
7 1/2 3600 213TC 140770.00 √ 1,810 C215T34FK11 160 230/460 17.8 90.2 1.15 20.57 S, MX, T
7 1/2 3600 213TC 170166.60 √ 1,855 C213T34FK5 183 208-230/460 18.3 91.0 1.15 18.95 C, CN, T
ODP Motors
Three Phase
7 1/2 1800 213TC 140521.00 √ 1,586 C213T17FK7 152 230/460 21.6 91.7 1.25 18.71 S, MX, T
7 1/2 1800 213TC 170165.60 √ 1,753 C286T17DK5 155 230/460 18.6 91.7 1.15 18.94 C, CN, T
7 1/2 1800 213TC LM16752 √ 2,228 AF4B7.5TC61 141 230/460 19.2 91.7 1.25 19.57 A, US
7 1/2 1200 254TC 170138.60 √ 3,379 C254T11FB9 249 208-230/460 22.2 91.7 1.15 23.75 C, CN, T
7 1/2 1200 254TC LM16753 √ 3,226 AAF6B7.5TC61 235 230/460 19.8 91.0 1.25 23.40 A, US
7 1/2 900 256TC LM32839 C/A 3,962 AF8B7.5TC61 225 230/460 23.0 86.5 1.15 25.15 A, US
10 3600 215TC 140769.00 √ 2,048 C213T34FK1 175 230/460 23.6 91.7 1.15 21.82 S, MX, T
TEFC Motors
Three Phase
10 3600 215TC LM32840 C/A 2,299 SSF2B10TC1 156 230/460 23.6 91.7 1.15 22.22 S, MX
10 3600 215TC 170168.60 √ 2,171 C215T34FK15 181 208-230/460 23.0 91.7 1.15 20.36 C, CN, T
10 3600 215TC LM16755 √ 2,390 AF2B10TC61 150 230/460 23.6 91.7 1.25 20.57 A, US
10 1800 215TC 140522.00 √ 1,916 C215T17FK3 160 230/460 26.6 91.7 1.25 19.71 S, MX, T
10 1800 215TC LM32841 √ 1,900 SSF4B10TC61 152 230/460 25.6 91.7 1.25 22.22 S, MX
10 1800 215TC 170167.60 √ 2,005 C215T17FK20 177 208-230/460 25.0 91.7 1.15 20.35 C, CN, T
10 1800 215TC LM16757 √ 2,355 AF4B10TC61 150 230/460 25.0 91.7 1.25 19.57 A, US
Inverter Duty
10 1200 256TC 170139.60 √ 3,765 C256T11FB11 300 208-230/460 28.8 91.7 1.15 25.48 C, CN, T
Motors
10 1200 256TC LM16759 √ 4,031 AF6B10TC61 187 230/460 26.2 91.0 1.25 2515.00 A, US
Continued on next page.
Shaded model numbers are cast iron frame.
Green items are Premium Efficient. Note listing on inside back flap.
D - Item to be discontinued once inventory is depleted. Specifications are subject to change without notice.
C/A - Check Availability.
Note T - N/C T-stats
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
15 3600 254TC 171586.60 √ 3,333 C254T34FK8 292 208-230/460 34.5 92.4 1.25 23.75 C, CN, T
15 1800 254TC 171587.60 √ 3,447 C254T17FK8 284 208-230/460 36.0 92.4 1.25 23.75 C, CN, T
15 1800 254TC LM16762 √ 3,320 AF4B15TC61 250 230/460 37.5 92.4 1.25 24.00 A, US
15 1200 284TC 170104.60 √ 5,610 C284T11FB9 333 208-230/460 40.5 92.4 1.15 26.26 C, CN, T
20 3600 256TC 171588.60 √ 4,094 C256T34FK3 326 208-230/460 46.0 92.4 1.15 25.48 C, CN, T
20 1800 256TC 171589.60 √ 4,115 C256T17FK8 325 208-230/460 50.0 93.0 1.15 25.48 C, CN, T
TEFC Motors
Single Phase
20 1800 256TC LM16767 √ 3,609 AF4B20TC61 288 230/460 48.0 93.0 1.25 25.75 A, US
20 1200 286TC LM16769 √ 7,174 AF6B20TC61Y 416 230/460 61.0 91.7 1.15 28.01 A, US
25 3600 284TC 170619.60 √ 4,516 C284T34FK8 393 208-230/460 56.5 93.0 1.15 24.88 C, CN, T
25 3600 284TSC 171590.60 √ 5,145 C284T34FK5 290 208-230/460 56.8 93.0 1.15 24.88 C, CN, T
25 1800 284TC 171591.60 √ 5,324 C284T17FK5 388 208-230/460 59.0 93.6 1.25 26.26 C, CN, T
25 1800 284TC LM16772 √ 4,904 AF4B25TC61Y 280 230/460 64.0 93.6 1.25 26.51 A, US
25 1800 284TSC LM32654 √ 4,878 AF4B25TSC61Y 282 230/460 65.0 93.6 1.25 25.13 A, US
30 3600 286TSC 170108.60 √ 5,328 C286T34FK14 400 208-230/460 68.0 94.1 1.15 27.83 C, CN, T
ODP Motors
Three Phase
30 3600 286TC 170620.60 √ 5,328 C286T34FK11 400 208-230/460 67.6 93.0 1.15 26.26 C, CN, T
30 1800 286TC 171592.60 √ 6,415 C286T17FK4 436 208-230/460 70.0 94.1 1.15 27.84 C, CN, T
30 1800 286TC LM16774 √ 6,373 AF4B30TC61Y 361 230/460 75.0 93.6 1.25 28.01 A, US
30 1800 286TSC LM32842 √ 6,373 AF430TSC61Y 432 230/460 75.0 93.6 1.25 26.63 A, US
30 1200 326TC LM13724 C/A 11,169 SF6B30TC61Y 573 230/460 76.0 93.0 1.25 30.44 S, US
40 3600 324TSC 170110.60 √ 7,859 C324T34FK8 574 208-230/460 90 92.4 1.15 28.15 C, CN, T
40 1800 324TC 171593.60 √ 8,292 C324T17FK5 532 208-230/460 92 94.1 1.15 29.53 C, CN, T
TEFC Motors
Three Phase
40 1800 324TC LM13726 √ 11,868 SF4B40TC61Y 518 230/460 101 94.1 1.25 28.94 S, US
40 1800 324TSC LM32652 √ 11,868 SF4B40TSC61Y 535 230/460 102 94.1 1.25 27.44 S, US
40 1200 364TC LM15565 √ 13,120 SF6B40TC61Y 778 230/460 119 94.1 1.25 31.89 S, US
50 3600 326TSC 170112.60 √ 8,086 C326T34FK5 604 208-230/460 112 94.1 1.15 29.72 C, CN, T
50 1800 326TC 171594.60 √ 9,108 C326T17FK5 592 208-230/460 117 94.5 1.25 31.02 C, CN, T
50 1800 326TC LM13728 √ 11,919 SF4B59TC61Y 573 230/460 127 94.5 1.25 30.44 S, US
50 1800 326TSC LM32843 √ 11,919 SF4B50TSC61Y 598 230/460 122 94.5 1.25 28.94 S, US
Inverter Duty
50 1200 365TC LM15568 C/A 15,721 SF6B50TC61Y 835 230/460 138 94.1 1.25 32.89 S, US
Motors
Tech Information
Totally Enclosed - General Purpose
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
60 3600 364TSC 170114.60 √ 13,220 C364T34FK3 860 208-230/460 134 94.1 1.15 30.51 C, CN, T
60 1800 364TC 171595.60 √ 14,444 C364T17FK5 670 208-230/460 139 95.4 1.25 32.64 C, CN, T
60 1800 364TC LM15563 √ 15,654 SF4B60TC61Y 778 230/460 145 95.0 1.25 31.89 S, US
60 1800 364TSC LM32665 √ 15,654 SF4B60TSC61Y 804 230/460 145 95.0 1.25 29.77 S, US
75 3600 365TSC 171115.60 √ 15,869 C365T34FK3 773 208-230/460 167 94.5 1.15 12.25 C, CN, T
75 1800 365TC 171596.60 √ 16,617 C365T17FK6 1040 208-230/460 171 95.8 1.15 33.62 C, CN, T
TEFC Motors
Single Phase
75 1800 365TC LM15567 √ 16,370 SF4B75TC61Y 835 230/460 178 95.4 1.15 32.89 S, US
75 1800 365TSC LM32653 √ 16,370 SF4B75TSC61Y 855 230/460 178 95.4 1.15 30.77 S, US
100 3600 405TSC LM16719 C/A 23,539 SF2B100TSC61Y 1002 230/460 210 94.5 1.15 33.87 S, US
100 1800 405TC 171597.60 √ 20,348 C405T17FK2 1076 208-230/460 225 95.4 1.15 37.91 C, CN, T
100 1800 405TC LM15263 C/A 19,786 SF4B100TC61Y 1006 230/460 236 95.4 1.15 36.87 S, US
100 1800 405TSC LM32659 √ 19,786 SF4B100TSC61Y 1048 230/460 244 95.4 1.15 33.87 S, US
125 3600 444TSC LM13730 C/A 30,148 SF2B125TSC64Y 1359 460 133* 95.0 1.15 37.74 S, US
125 1800 444TC LM13731 C/A 26,347 SF4B125TC64Y 1359 460 146* 96.2 1.15 41.49 S, US
ODP Motors
Three Phase
125 1800 444TSC LM32844 √ 26,347 SF4B125TSC64Y 1372 460 146* 96.2 1.15 37.74 S, US
150 3600 445TSC LM13733 C/A 34,266 SF2B150TSC64Y 1537 460 163* 95.8 1.15 39.74 S, US
150 1800 445TC LM13734 C/A 30,341 SF4B150TC64Y 1552 460 168* 96.2 1.15 43.49 S, US
150 1800 445TSC LM32845 √ 30,341 SF4B150TSC64Y 1555 460 168* 96.2 1.15 39.74 S, US
200 3600 445TSC LM13736 C/A 42,964 SF2B200TSC64Y 1552 460 212* 95.8 1.15 39.74 S, US
200 1800 445TC LM13737 C/A 37,257 SF4B200TC64Y 1537 460 227* 96.2 1.15 43.49 S, US
200 1800 445TSC LM32660 √ 37,257 SF4B200TSC64Y 1555 460 227* 96.2 1.15 39.74 S, US
TEFC Motors
Three Phase
100 1800 405TSC LM32659 √ 19,786 SF4B100TSC61Y 1048 230/460 244 95.4 1.15 33.87 S, US
125 3600 444TSC LM13730 C/A 30,148 SF2B125TSC64Y 1359 460 133* 95.0 1.15 37.74 S, US
125 1800 444TC LM13731 C/A 26,347 SF4B125TC64Y 1359 460 146* 96.2 1.15 41.49 S, US
125 1800 444TSC LM32844 √ 26,347 SF4B125TSC64Y 1372 460 146* 96.2 1.15 37.74 S, US
150 3600 445TSC LM13733 C/A 34,266 SF2B150TSC64Y 1537 460 163* 95.8 1.15 39.74 S, US
150 1800 445TC LM13734 C/A 30,341 SF4B150TC64Y 1552 460 168* 96.2 1.15 43.49 S, US
150 1800 445TSC LM32845 √ 30,341 SF4B150TSC64Y 1555 460 168* 96.2 1.15 39.74 S, US
Inverter Duty
200 3600 445TSC LM13736 C/A 42,964 SF2B200TSC64Y 1552 460 212* 95.8 1.15 39.74 S, US
Motors
200 1800 445TC LM13737 C/A 37,257 SF4B200TC64Y 1537 460 227* 96.2 1.15 43.49 S, US
200 1800 445TSC LM32660 √ 37,257 SF4B200TSC64Y 1555 460 227* 96.2 1.15 39.74 S, US
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Green items are Premium Efficient.
C/A - Check Availability.
Note T - N/C T-stats
Severe Duty
*Amps at 460 volts.
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Features:
• Class F insulation
• Stamped steel conduit box
• Standard assembly F1, reversible to F2 by reassembly
• UL recognized, CSA certified, CE mark
Single Phase
ODP Motors
Note: When ordering catalog numbers beginning with GT, use the model number instead of the catalog number.
2 1200 184T 199002.00 D 1,099 C184T11FB1 125 230/460 6.0 88.5 1.15 15.81 C, CN
2 1200 184T B199002.00 D 1,099 D184T11FB34 125 230/460 6.0 88.5 1.15 15.81 C, CN
2 1200 184T GT1008A √ 1,099 184TTFCD6076 121 230/460 6.0 88.5 1.15 15.81 C, MX
2 1200 184T GT1108A √ 1,099 184TTFCD6080 121 575 2.4 88.5 1.15 15.81 C, MX
3 3600 182T 199003.00 D 969 C182T34FB1 85 230/460 7.6 86.5 1.15 14.80 C, CN
3 3600 182T B199003.00 D 969 D182T34FB13 85 230/460 8.0 86.5 1.15 15.08 C, CN
3 3600 182T GT1009A √ 969 182TTFCD6001 86 230/460 8.0 86.5 1.15 15.08 C, MX
TEFC Motors
Three Phase
3 3600 182T GT1109A √ 969 182TTFCD6005 86 575 3.2 86.5 1.15 15.08 C, MX
3 1800 182T 199004.00 D 912 C182T17FB1 102 230/460 7.8 89.5 1.15 14.80 C, CN
3 1800 182T B199004.00 D 912 D182T17FB64 100 230/460 8.0 89.5 1.15 15.08 C, CN
3 1800 182T GT1010A √ 912 182TTFCD6026 97 230/460 8.0 89.5 1.15 15.08 C, MX
3 1800 182T GT1110A √ 912 182TTFCD6030 97 575 3.2 89.5 1.15 15.08 C, MX
3 1200 213T B199005.00 D 1,441 C213T11FB7 153 230/460 8.6 89.5 1.15 18.35 S, CN
3 1200 213T GT1511 √ 1,441 213TTFBD6080 153 230/460 8.6 89.5 1.15 18.35 S, MX
Inverter Duty
3 1200 213T 199005.00 D 1,495 C213T11FB1BA 200 230/460 8.6 89.5 1.15 18.23 C, CN
Motors
3 1200 213T B194295.00 D 1,453 D213T11FB1A 200 230/460 8.6 89.5 1.15 18.53 C, CN
3 1200 213T GT1011A √ 1,453 213TTFCD6076 150 230/460 8.6 89.5 1.15 18.53 C, MX
3 1200 213T GT1111A √ 1,453 213TTFCD6080 150 575 3.5 89.5 1.15 18.53 C, MX
5 3600 184T 199006.00 D 1,123 C184T34FB1 96 230/460 12.0 88.5 1.15 15.81 C, CN
5 3600 184T B199006.00 D 1,123 D184T34FB32 96 230/460 12.0 88.5 1.15 16.08 C, CN
5 3600 184T GT1012A √ 1,123 184TTFCD6001 95 230/460 12.0 88.5 1.15 16.08 C, MX
5 3600 184T GT1112A √ 1,123 184TTFCD6005 95 575 4.8 88.5 1.15 16.08 C, MX
Severe Duty
Motors
5 1800 184T 199007.00 D 1,015 C184T17FB1 118 230/460 12.4 89.5 1.15 15.81 C, CN
5 1800 184T B199007.00 D 1,015 D184T17FB81 118 230/460 13.0 89.5 1.15 16.08 C, CN
5 1800 184T GT1013A √ 1,015 184TTFCD6026 111 230/460 13.0 89.5 1.15 16.08 C, MX
5 1800 184T GT1113A √ 1,015 184TTFCD6030 111 575 5.2 89.5 1.15 16.08 C, MX
5 1200 215T B199008.00 D 1,753 C215T11FB13 185 230/460 13.7 89.5 1.15 19.95 S, CN
5 1200 215T GT1514 √ 1,753 215TTFBD6080 185 230/460 13.7 89.5 1.15 19.95 S, MX
Explosion Proof
5 1200 215T 199008.00 D 1,856 C215T11FB1BA 185 230/460 14.0 89.5 1.15 19.73 C, CN
5 1200 215T B194296.00 D 1,805 D215T11FB1A 185 230/460 13.6 89.5 1.15 20.03 C, CN
Motors
5 1200 215T GT1014A √ 1,805 215TTFCD6076 168 230/460 13.6 89.5 1.15 20.03 C, MX
5 1200 215T GT1114A √ 1,805 215TTFCD6080 168 575 5.5 89.5 1.15 20.03 C, MX
Shaded model numbers are cast iron frame. Continued on next page.
Green items are Premium Efficient. Note listing on inside back flap.
D - Item to be discontinued once inventory is depleted. Specifications are subject to change without notice.
Duty Motors
Automotive
Tech Information
SHAFT MOTORS Ultimate e® / Globetrotter® General Purpose Motors
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
7 1/2 3600 213T B199009.00 D 1,333 C213T34FB46 124 230/460 18.4 89.5 1.15 18.35 S, CN
7 1/2 3600 213T GT1515 √ 1,333 213TTFBD6002 136 230/460 18.4 89.5 1.15 18.35 S, MX
7 1/2 3600 213T B194297.00 D 1,509 D213T34FB1 163 230/460 18.4 89.5 1.15 18.53 C, CN
7 1/2 3600 213T GT1015A √ 1,509 213TTFCD6001 148 230/460 18.4 89.5 1.15 18.53 C, MX
7 1/2 3600 213T GT1115A √ 1,509 213TTFCD6005 148 575 7.4 89.5 1.15 18.53 C, MX
7 1/2 1800 213T B199010.00 D 1,290 C213T17FB47 181 230/460 19.0 91.7 1.15 18.35 S, CN
7 1/2 1800 213T GT1516 √ 1,290 213TTFBD6030 158 230/460 19.0 91.7 1.15 18.35 S, MX
TEFC Motors
Single Phase
7 1/2 1800 213T 199010.00 D 1,315 C213T17FB1AB 181 230/460 18.6 91.7 1.15 18.23 C, CN
7 1/2 1800 213T B194298.00 D 1,433 D213T17FB1 181 230/460 19.0 91.7 1.15 18.53 C, CN
7 1/2 1800 213T GT1016A √ 1,433 213TTFCD6026 167 230/460 19.0 91.7 1.15 18.53 C, MX
7 1/2 1800 213T GT1116A √ 1,433 213TTFCD6030 167 575 7.6 91.7 1.15 18.53 C, MX
7 1/2 1200 254T B199011.00 D 2,433 D254T11FB7 280 230/460 19.8 91.0 1.15 24.15 C, CN
7 1/2 1200 254T GT1017A √ 2,433 254TTFCD6076 290 230/460 19.8 91.0 1.15 24.15 C, MX
7 1/2 1200 254T GT1117A √ 2,433 254TTFCD6080 290 575 7.9 91.0 1.15 24.15 C, MX
ODP Motors
Three Phase
10 3600 215T B199012.00 D 1,502 C215T34FB52 175 230/460 23.6 90.2 1.15 20.70 S, CN
10 3600 215T GT1518 √ 1,502 215TTFBD6002 155 230/460 23.6 90.2 1.15 20.70 S, MX
10 3600 215T 199012.00 D 1,543 C215T34FB1BA 175 230/460 22.8 90.2 1.15 19.73 C, CN
10 3600 215T B194299.00 D 1,543 D215T34FB1 175 230/460 23.6 90.2 1.15 20.03 C, CN
10 3600 215T GT1018A √ 1,543 215TTFCD6001 171 230/460 23.6 90.2 1.15 20.03 C, MX
10 3600 215T GT1118A √ 1,543 215TTFCD6005 171 575 9.5* 90.2 1.15 20.03 C, MX
10 1800 215T B199013.00 D 1,469 C215T17FB52 198 230/460 25.0 91.7 1.15 19.95 S, CN
TEFC Motors
Three Phase
10 1800 215T GT1519 √ 1,469 215TTFBD6030 165 230/460 25.0 91.7 1.15 19.95 S, CN
10 1800 215T 199013.00 D 1,495 C215T17FB1BA 198 230/460 24.4 91.7 1.15 19.73 C, CN
10 1800 215T B194300.00 D 1,725 D215T17FB1 198 230/460 25.0 91.7 1.15 20.03 C, CN
10 1800 215T GT1019A √ 1,725 215TTFCD6026 183 230/460 25.0 91.7 1.15 20.03 C, MX
10 1800 215T GT1119A √ 1,725 215TTFCD6030 183 575 10.0* 91.7 1.15 20.03 C, MX
10 1200 256T 199014.00 D 2,999 C256T11FB1 350 230/460 26.8 91.0 1.15 25.43 C, CN
10 1200 256T B199014.00 D 2,960 D256T11FB8 120 230/460 25.8 91.0 1.15 25.89 C, CN
Inverter Duty
10 1200 256T GT1020A √ 2,960 256TTFCD6076 307 230/460 25.8 91.0 1.15 25.89 C, MX
Motors
10 1200 256T GT1120A √ 2,960 256TTFCD6080 307 575 10.3* 91.0 1.15 25.89 C, MX
15 3600 254T B199015.00 D 2,330 D254T34FB11 329 230/460 35.5 91.0 1.15 24.15 C, CN
15 3600 254T GT1021A √ 2,330 254TTFCD6001 393 230/460 35.5 91.0 1.15 24.15 C, MX
15 3600 254T GT1121A √ 2,330 254TTFCD6005 393 575 14.3* 91.0 1.15 24.15 C, MX
15 1800 254T B199016.00 D 2,226 D254T17FB14 343 230/460 37.5 92.4 1.15 24.15 C, CN
15 1800 254T GT1022A √ 2,226 254TTFCD6026 299 230/460 37.5 92.4 1.15 24.15 C, MX
15 1800 254T GT1122A √ 2,226 254TTFCD6030 299 575 15.1* 92.4 1.15 24.15 C, MX
Severe Duty
15 1200 284T 199017.00 D 3,902 C284T11FB1 682 230/460 39.5 91.7 1.15 27.83 C, CN
Motors
15 1200 284T B199017.00 D 3,902 D284T11FB10 394 230/460 40.0 91.7 1.15 26.65 C, CN
15 1200 284T GT1023A √ 3,902 284TTFCD6076 412 230/460 40.0 91.7 1.15 26.65 C, MX
15 1200 284T GT1123A √ 3,902 284TTFCD6080 412 575 16.0* 91.7 1.15 26.65 C, MX
20 3600 256T B199018.00 D 2,836 D256T34FB21 250 230/460 47.5 91.0 1.15 25.89 C, CN
20 3600 256T GT1024A √ 2,836 256TTFCD6001 265 230/460 47.5 91.0 1.15 25.89 C, MX
20 3600 256T GT1124A √ 2,836 256TTFCD6005 265 575 19.0* 91.0 1.15 25.89 C, MX
Explosion Proof
20 1800 256T B199019.00 D 2,784 D256T17FB8 411 230/460 48.5 93.0 1.15 25.89 C, CN
Motors
20 1800 256T GT1025A √ 2,784 256TTFCD6026 335 230/460 48.5 93.0 1.15 25.89 C, MX
20 1800 256T GT1125A √ 2,784 256TTFCD6030 335 575 19.4* 93.0 1.15 25.89 C, MX
20 1200 286T 199020.00 D 4,470 C286T11FB1 500 230/460 52.0 91.7 1.15 31.34 C, CN
20 1200 286T B199020.00 D 4,367 D286T11FB10 445 230/460 52.0 91.7 1.15 28.14 C, CN
20 1200 286T GT1026A √ 4,367 286TTFCD6076 385 230/460 52.0 91.7 1.15 28.14 C, MX
20 1200 286T GT1126A √ 4,367 286TTFCD6080 385 575 20.8* 91.7 1.15 28.14 C, MX
Duty Motors
Automotive
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
Single Phase
ODP Motors
25 3600 284TS B199021.00 D 3,506 D284T34FB13 465 230/460 60.0 91.7 1.15 25.28 C, CN
25 3600 284TS GT1027A √ 3,506 284TSTFCD6001 386 230/460 60.0 91.7 1.15 25.28 C, MX
25 3600 284TS GT1127A √ 3,506 284TSTFCD6005 386 575 24.0* 91.7 1.15 25.28 C, MX
25 1800 284T B199022.00 D 3,256 D284T17FB9 502 230/460 61.0 93.6 1.15 26.65 C, CN
25 1800 284T GT1028A √ 3,256 284TTFCD6026 400 230/460 61.0 93.6 1.15 26.65 C, MX
25 1800 284T GT1128A √ 3,256 284TTFCD6030 400 575 24.3* 93.6 1.15 26.65 C, MX
25 1800 284TS B194312.00 D 3,332 D284T17FB10 447 230/460 61.0 93.6 1.15 25.28 C, CN
25 1800 284TS GT1057 √ 3,332 284TSTFCD6026 453 230/460 61.0 93.6 1.15 25.28 C, CN
TEFC Motors
Single Phase
25 1200 324T 199023.00 D 5,879 C324T11FB1 1136 230/460 66.0 93.0 1.15 32.68 C, CN
25 1200 324T B199023.00 D 5,879 D324T11FB7 1136 230/460 64.0 93.0 1.15 29.69 C, CN
25 1200 324T GT1029A √ 5,879 324TTFCD6076 1136 230/460 64.0 93.0 1.15 29.69 C, MX
25 1200 324T GT1129A √ 5,879 324TTFCD6080 1136 575 25.6* 93.0 1.15 29.69 C, MX
30 3600 286TS B199024.00 D 4,147 D286T34FB8 550 230/460 71.0 91.7 1.15 26.77 C, CN
30 3600 286TS GT1030A √ 4,147 286TSTFCD6001 353 230/460 71.0 91.7 1.15 26.77 C, MX
30 3600 286TS GT1130A √ 4,147 286TSTFCD6005 353 575 28.5* 91.7 1.15 26.77 C, MX
ODP Motors
Three Phase
30 1800 286T B199025.00 D 3,808 D286T17FB9 537 230/460 72.5 93.6 1.15 28.14 C, CN
30 1800 286T GT1031A √ 3,808 286TTFCD6026 492 230/460 72.5 93.6 1.15 28.14 C, MX
30 1800 286T GT1131A √ 3,808 286TTFCD6030 492 575 29.1* 93.6 1.15 28.14 C, MX
30 1800 286TS B194313.00 D 3,887 D286T17FB10 445 230/460 72.5 93.6 1.15 26.77 C, CN
30 1800 286TS GT1058 √ 3,887 286TSTFCD6026 493 230/460 72.5 93.6 1.15 26.77 C, CN
30 1200 326T B199026.00 D 6,306 D326T11FB7 700 230/460 76.0 93.0 1.15 31.19 C, CN
30 1200 326T GT1032A √ 6,306 326TTFCD6076 1136 230/460 76.0 93.0 1.15 31.19 C, MX
TEFC Motors
Three Phase
30 1200 326T GT1132A √ 6,306 326TTFCD6080 1136 575 30.5* 93.0 1.15 31.19 C, MX
40 3600 324TS B199027.00 D 5,597 D324T34FB8 622 230/460 92.5 92.4 1.15 28.19 C, CN
40 3600 324TS GT1033A √ 5,597 324TSTFCD6001 622 230/460 92.5 92.4 1.15 28.19 C, MX
40 3600 324TS GT1133A √ 5,597 324TSTFCD6005 622 575 37.0* 92.4 1.15 28.19 C, MX
40 1800 324T B199028.00 D 5,123 D324T17FB15 634 230/460 95.0 94.1 1.15 29.69 C, CN
40 1800 324T GT1034A √ 5,202 324TTFCD6026 625 230/460 95.0 94.1 1.15 29.69 C, MX
40 1800 324T GT1134A √ 5,202 324TTFCD6030 625 575 38.0* 94.1 1.15 29.69 C, MX
Inverter Duty
40 1800 324TS B194314.00 D 5,202 D324T17FB16 618 230/460 95.0 94.1 1.15 28.19 C, CN
Motors
40 1800 324TS GT1059 √ 5,202 324TSTFCD6026 622 230/460 95.0 94.1 1.15 28.19 C, CN
40 1200 364T B199029.00 D 8,724 D364T11FB13 950 230/460 96.0 94.1 1.15 33.32 C, CN
40 1200 364T GT1035A √ 8,724 364TTFCD6086 950 230/460 96.0 94.1 1.15 33.32 C, MX
40 1200 364T GT1135A √ 8,724 364TTFCD6080 950 575 38.5* 94.1 1.15 33.32 C, MX
50 3600 326TS B199030.00 D 6,389 D326T34FB9 680 230/460 113.0 93.0 1.15 29.69 C, CN
50 3600 326TS GT1036A √ 6,389 326TSTFCD6001 622 230/460 113.0 93.0 1.15 29.69 C, MX
50 3600 326TS GT1136A √ 6,389 326TSTFCD6005 622 575 45.0* 93.0 1.15 29.69 C, MX
Severe Duty
50 1800 326T B199031.00 D 6,288 D326T17FB16 750 230/460 117.0 94.5 1.15 31.19 C, CN
Motors
50 1800 326T GT1037A √ 6,288 326TTFCD6026 680 230/460 117.0 94.5 1.15 31.19 C, MX
50 1800 326T GT1137A √ 6,288 326TTFCD6030 680 575 47.0* 94.5 1.15 31.19 C, MX
50 1800 326TS B194315.00 D 6,349 D326T17FB17 608 230/460 117.0 94.5 1.15 29.69 C, CN
50 1800 326T GT1060 √ 6,349 326TSTFCD6026 675 230/460 117.0 94.5 1.15 29.69 C, CN
50 1200 365T 199032.00 D 9,916 C365T11FB1 1000 230/460 117.0 94.1 1.15 38.39 C, CN
50 1200 365T B199032.00 D 9,916 D365T11FB13 1000 230/460 121.0 94.1 1.15 34.30 C, CN
Explosion Proof
50 1200 365T GT1038A √ 9,916 365TTFCD6086 950 230/460 121.0 94.1 1.15 34.30 C, MX
Motors
50 1200 365T GT1138A √ 9,916 365TTFCD6080 950 575 48.5* 94.1 1.15 34.30 C, MX
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Green items are Premium Efficient.
D - Item to be discontinued once inventory is depleted.
* F.L Amps @ 575V
Duty Motors
Automotive
Tech Information
Ultimate e® / Globetrotter® General Purpose Motors
Three Phase - TEFC - Rigid Base
Note: When ordering catalog numbers beginning with GT, use the model number instead of the catalog number.
Stock
RPM 60 NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
60 3600 364TS B199033.00 D 8,685 D364T34FB8 897 230/460 135.0 93.6 1.15 31.19 C, CN
Single Phase
ODP Motors
60 3600 364TS GT1039A √ 8,685 364TSTFCD6001 897 230/460 135.0 93.6 1.15 31.19 C, MX
60 3600 364TS GT1139A √ 8,685 364TSTFCD6005 897 575 54.0* 93.6 1.15 31.19 C, MX
60 1800 364T B199034.00 D 8,580 D364T17FB13 947 230/460 138.0 95.0 1.15 33.32 C, CN
60 1800 364T GT1040A √ 8,580 364TTFCD6036 805 230/460 138.0 95.0 1.15 33.32 C, MX
60 1800 364T GT1140A √ 8,580 364TTFCD6040 805 575 55.0* 95.0 1.15 33.32 C, MX
60 1800 364TS B194316.00 D 8,665 D364T17FB14 877 230/460 138.0 95.0 1.15 31.19 C, CN
60 1800 364TS GT1061 √ 8,665 364TSTFCD6036 904 230/460 138.0 95.0 1.15 31.19 C, CN
TEFC Motors
Single Phase
60 1200 404T B199035.00 D 11,618 D404T11FB10 1211 230/460 143.0 94.5 1.15 38.77 C, CN
60 1200 404T GT1041A √ 11,618 404TTFCD6086 415 230/460 143.0 94.5 1.15 38.77 C, MX
60 1200 404T GT1141A √ 11,618 404TTFCD6080 415 575 57.0* 94.5 1.15 38.77 C, MX
75 3600 365TS 199036.00 D 10,788 C365T34FB1 964 230/460 167.0 93.6 1.15 36.34 C, CN
75 3600 365TS B199036.00 D 10,788 D365T34FB8 964 230/460 168.0 93.6 1.15 32.17 C, CN
75 3600 365TS GT1042A √ 10,788 365TSTFCD6001 950 230/460 168.0 93.6 1.15 32.17 C, MX
75 3600 365TS GT1142A √ 10,788 365TSTFCD6002 950 575 67.0* 93.6 1.15 32.17 C, MX
ODP Motors
Three Phase
75 1800 365T B199037.00 D 10,542 D365T17FB14 1052 230/460 171.0 95.4 1.15 34.30 C, CN
75 1800 365T GT1043A √ 10,542 365TTFCD6036 983 230/460 171.0 95.4 1.15 34.30 C, MX
75 1800 365T GT1143A √ 10,542 365TTFCD6040 983 575 68.5* 95.4 1.15 34.30 C, MX
75 1800 365TS B194317.00 D 10,616 D365T17FB15 990 230/460 171.0 95.4 1.15 32.17 C, CN
75 1800 365TS GT1062 √ 10,616 365TSTFCD6036 981 230/460 171.0 95.4 1.15 32.17 C, CN
75 1200 405T B199038.00 D 13,678 D405T11FB11 1303 230/460 178.0 94.5 1.15 38.77 C, CN
75 1200 405T GT1044A √ 13,678 405TTFCD6086 1304 230/460 178.0 94.5 1.15 38.77 C, MX
TEFC Motors
75 1200 405T GT1144A √ 13,678 405TTFCD6080 1304 575 71.0* 94.5 1.15 38.77 C, MX
Three Phase
100 3600 405TS 199039.00 D 13,088 C405T34FB1 1400 230/460 216.0 94.1 1.15 39.76 C, CN
100 3600 405TS B199039.00 D 13,088 D405T34FB10 1130 230/460 222.0 94.1 1.15 35.77 C, CN
100 3600 405TS GT1045A √ 13,088 405TSTFCD6001 1100 230/460 222.0 94.1 1.15 35.77 C, MX
100 3600 405TS GT1145A √ 13,088 405TSTFCD6005 1100 575 89.0* 94.1 1.15 35.77 C, MX
100 1800 405T B199040.00 D 12,885 D405T17FB12 1305 230/460 226.0 95.4 1.15 38.77 C, CN
100 1800 405T GT1046A √ 12,885 405TTFCD6036 1201 230/460 226.0 95.4 1.15 38.77 C, MX
100 1800 405T GT1146A √ 12,885 405TTFCD6040 1201 575 90.5* 95.4 1.15 38.77 C, MX
Inverter Duty
100 1800 405TS B194318.00 D 12,955 D405T17FB13 1293 230/460 226.0 95.4 1.15 35.77 C, CN
Motors
100 1800 405TS GT1063 √ 12,955 405TSTFCD6036 1681 230/460 226.0 95.4 1.15 35.77 C, CN
100 1200 444T 199041.00 D 20,170 C444T11FB1 1958 230/460 228.0 95.0 1.15 50.79 C, CN
100 1200 444T B199041.00 D 20,170 D444T11FB10 1866 230/460 229.0 95.0 1.15 46.71 C, CN
100 1200 444T GT1047A √ 20,170 444TTFCD6086 1865 230/460 229.0 95.0 1.15 46.71 C, MX
100 1200 444T GT1147A √ 20,170 444TTFCD6080 1865 575 91.5* 95.0 1.15 46.71 C, MX
125 3600 444TS 199042.00 D 18,280 C444T34FB1 1850 460 136.0** 95.0 1.15 47.05 C, CN
Severe Duty
125 3600 444TS B199042.00 D 18,280 D444T34FB11 1684 460 138.0** 95.0 1.15 42.96 C, CN
Motors
125 3600 444TS GT1048A √ 18,280 444TSTFCD6001 1753 460 138.0** 95.0 1.15 42.96 C, MX
125 3600 444TS GT1148A √ 18,280 444TSTFCD16002 1753 575 110.0* 95.0 1.15 42.96 C, MX
125 1800 444T 199043.00 D 18,058 C444T17FB1 1885 460 140.0** 95.4 1.15 50.79 C, CN
125 1800 444T B199043.00 D 18,058 D444T17FB7 1700 460 140.0** 95.4 1.15 46.71 C, CN
125 1800 444T GT1049A √ 18,058 444TTFCD6036 1588 460 140.0** 95.4 1.15 46.71 C, MX
125 1800 444T GT1149A √ 18,058 444TTFCD6044 1588 575 112.0* 95.4 1.15 46.71 C, MX
Explosion Proof
125 1800 444TS B194319.00 D 18,119 D444T17FB8 1670 460 140.0** 95.4 1.15 42.96 C, CN
Motors
125 1800 444T GT1064 √ 18,119 444TSTFCD6036 1909 460 140.0** 95.4 1.15 42.96 C, CN
125 1200 445T 199044.00 D 21,048 C445T11FB1 2081 460 142.0** 95.0 1.15 50.79 C, CN
125 1200 445T B199044.00 D 21,048 D445T11FB8 2081 460 143.0** 95.0 1.15 46.71 C, CN
125 1200 445T GT1050A √ 21,048 445TTFCD6086 1962 460 143.0** 95.0 1.15 46.71 C, MX
125 1200 445T GT1150A √ 21,048 445TTFCD6080 1962 575 114.0* 95.0 1.15 46.71 C, MX
Stock
Single Phase
ODP Motors
150 1800 445T GT1052A √ 21,204 445TTFCD6036 1950 460 169.0 95.8 1.15 46.71 C, MX
150 1800 445T GT1152A √ 21,204 445TTFCD6037 1950 575 135.0* 95.8 1.15 46.71 C, MX
150 1800 445TS B194320.00 D 21,254 D445T17FB17 1881 460 169.0 95.8 1.15 42.96 C, CN
150 1800 445TS GT1065 √ 21,254 445TSTFCD6036 1875 460 169.0 95.8 1.15 42.96 C, CN
150 1200 447T 199047.00 D 26,762 C447T11FB1 2550 460 170.0 95.8 1.15 55.91 C, CN
150 1200 447T B199047.00 D 26,762 D447T11FB6 2550 460 171.0 95.8 1.15 55.21 C, CN
150 1200 447T GT1053A √ 26,762 447TTFCD6087 2451 460 171.0 95.8 1.15 55.21 C, MX
ODP Motors
Three Phase
150 1200 447T GT1153A √ 26,762 447TTFCD6080 2451 575 136.0* 95.8 1.15 55.21 C, MX
200 3600 447TS 199048.00 D 26,220 C447T34FB1 2450 460 215.0 95.4 1.15 52.17 C, CN
200 3600 447TS B199048.00 D 26,220 D447T34FB6 1020 460 217.0 95.4 1.15 51.46 C, CN
200 3600 447TS GT1054A √ 26,220 447TSTFCD6004 2311 460 217.0 95.4 1.15 51.46 C, MX
200 3600 447TS GT1154A √ 26,220 447TSTFCD6005 2311 575 174.0* 95.4 1.15 51.46 C, MX
200 1800 447T 199049.00 D 25,790 C447T17FB1 2376 460 224.0 96.2 1.15 55.91 C, CN
200 1800 447T B199049.00 D 25,790 D447T17FB10 2278 460 219.0 96.2 1.15 55.21 C, CN
TEFC Motors
Three Phase
200 1800 447T GT1055A √ 25,790 447TTFCD6038 2300 460 219.0 96.2 1.15 55.21 C, MX
200 1800 447T GT1155A √ 25,790 447TTFCD6039 2300 575 175.0* 96.2 1.15 55.21 C, MX
200 1800 447TS B194321.00 D 25,813 D447T17FB11 2500 460 219.0 96.2 1.15 51.46 C, CN
200 1800 447TS GT1066 √ 25,813 447TSTFCD6038 2275 460 219.0 96.2 1.15 51.46 C, CN
200 1200 449T 199050.00 D 28,501 C449T11FB1 2600 460 228.0 95.8 1.15 55.91 C, CN
200 1200 449T B199050.00 D 28,501 D449T11FB6 1065 460 227.0 95.8 1.15 55.21 C, CN
200 1200 449T GT1056A √ 28,501 449TTFCD6088 2494 460 227.0 95.8 1.15 55.21 C, MX
200 1200 449T GT1156A √ 28,501 449TTFCD6080 2494 575 182.0* 95.8 1.15 55.21 C, MX
Inverter Duty
Motors
Tech Information
Ultimate e® / Globetrotter® General Purpose Motors
Stock
Single Phase
ODP Motors
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
3 3600 182TC B199051.00 D 1,065 D182T34FK56 78 230/460 8.0 86.5 1.15 15.85 S, CN
3 3600 182TC GT1209A √ 1,065 182TTFBD6003 83 230/460 8.0 86.5 1.15 15.85 S, MX
3 3600 182TC GT1409A √ 1,065 182TTFBD6007 83 575 3.2* 86.5 1.15 15.85 S, MX
3 1800 182TC 199052.00 D 1,143 C182T17FK1 94 230/460 7.8 89.5 1.15 15.75 C, CN
3 1800 182TC B199052.00 D 1,053 D182T17FK53 94 230/460 8.0 89.5 1.15 15.85 S, CN
3 1800 182TC GT1210A √ 1,053 182TTFBD6028 105 230/460 8.0 89.5 1.15 15.85 S, MX
TEFC Motors
Single Phase
3 1800 182TC GT1410A √ 1,053 182TTFBD6032 105 575 3.2* 89.5 1.15 15.85 S, MX
5 3600 184TC 199053.00 D 1,287 C184T34FK1 167 230/460 12.0 88.5 1.15 16.73 C, CN
5 3600 184TC B199053.00 D 1,185 D184T34FK54 167 230/460 12.0 88.5 1.15 16.85 S, CN
5 3600 184TC GT1212A √ 1,185 184TTFBD6003 97 230/460 12.0 88.5 1.15 16.85 S, MX
5 3600 184TC GT1412A √ 1,185 184TTFBD6007 97 575 4.8* 88.5 1.15 16.85 S, MX
5 1800 184TC 199054.00 D 1,256 C184T17FK1 109 230/460 12.4 89.5 1.15 16.73 C, CN
5 1800 184TC B199054.00 D 1,156 D184T17FK57 109 230/460 13.0 89.5 1.15 16.85 S, CN
ODP Motors
Three Phase
5 1800 184TC GT1213A √ 1,156 184TTFBD6028 105 230/460 13.0 89.5 1.15 16.85 S, MX
5 1800 184TC GT1413A √ 1,156 184TTFBD6032 105 575 5.2* 89.5 1.15 16.85 S, MX
7 1/2 3600 213TC 199055.00 D 1,554 C213T34FK1 144 230/460 17.8 89.5 1.15 19.53 C, CN
7 1/2 3600 213TC B199055.00 D 1,525 C213T34FK1 165 230/460 18.4 89.5 1.15 19.10 S, CN
7 1/2 3600 213TC GT1215A √ 1,525 213TTFBD6003 136 230/460 18.4 89.5 1.15 19.10 S, MX
7 1/2 3600 213TC GT1415A √ 1,525 213TTFBD6007 136 575 7.4* 89.5 1.15 19.10 S, MX
7 1/2 1800 213TC B199056.00 D 1,444 C213T17FK1 185 230/460 19.0 91.7 1.15 19.10 S, CN
TEFC Motors
Three Phase
7 1/2 1800 213TC GT1216A √ 1,444 213TTFBD6028 158 230/460 19.0 91.7 1.15 19.10 S, MX
7 1/2 1800 213TC GT1416A √ 1,444 213TTFBD6032 158 575 7.6* 91.7 1.15 19.10 S, MX
10 3600 215TC B199057.00 D 1,755 C215T34FK1 163 230/460 23.6 90.2 1.15 20.70 S, CN
10 3600 215TC GT1218A √ 1,755 215TTFBD6003 155 230/460 23.6 90.2 1.15 20.70 S, MX
10 3600 215TC GT1418A √ 1,755 215TTFBD6007 155 575 9.5* 90.2 1.15 20.70 S, MX
10 1800 215TC B199058.00 D 1,734 C215T17FK1 169 230/460 25.0 91.7 1.15 20.70 S, CN
10 1800 215TC GT1219A √ 1,734 215TTFBD6028 175 230/460 25.0 91.7 1.15 20.70 S, MX
10 1800 215TC GT1419A √ 1,734 215TTFBD6032 175 575 10* 91.7 1.15 20.70 S, MX
Inverter Duty
15 3600 215TC B194128.00 D 2,351 C215T34FK49 186 230/460 35.0 91.0 1.15 20.70 S, CN
Motors
15 3600 215TC GT1248A √ 2,351 215TTFBD6001 186 230/460 35.0 91.0 1.15 20.70 S, MX
15 3600 254TC B199059.00 D 2,521 D254T34FK1 208 230/460 35.5 91.0 1.15 24.65 C, CN
15 3600 254TC GT1221A √ 2,521 254TTFCD6003 289 230/460 35.5 91.0 1.15 24.65 C, MX
15 3600 254TC GT1421A √ 2,521 254TTFCD6007 289 575 14.3* 91.0 1.15 24.65 C, MX
15 1800 254TC B199060.00 D 2,427 D254T17FK1 300 230/460 37.5 92.4 1.15 24.65 C, CN
15 1800 254TC GT1222A √ 2,427 254TTFCD6028 311 230/460 37.5 92.4 1.15 24.65 C, MX
Severe Duty
15 1800 254TC GT1422A √ 2,427 254TTFCD6032 311 575 15.1* 92.4 1.15 24.65 C, MX
Motors
20 3600 256TC B199061.00 D 2,965 D256T34FK1 387 230/460 47.5 91.0 1.15 26.39 C, CN
20 3600 256TC GT1224A √ 2,965 256TTFCD6003 375 230/460 47.5 91.0 1.15 26.39 C, MX
20 1800 256TC B199062.00 D 2,901 D256T17FK1 428 230/460 48.5 93.0 1.15 26.39 C, CN
20 1800 256TC GT1225A √ 2,901 256TTFCD6028 330 230/460 48.5 93.0 1.15 26.39 C, MX
25 3600 284TSC B199063.00 D 3,749 D284T34FK1 485 230/460 60.0 91.7 1.15 25.28 C, CN
25 3600 284TSC GT1227A √ 3,749 284TSTFCD6003 293 230/460 60.0 91.7 1.15 25.28 C, MX
Explosion Proof
25 1800 284TC 199064.00 D 3,499 C284T17FK1 525 230/460 62.0 93.6 1.15 30.16 C, CN
Motors
25 1800 284TC B199064.00 D 3,453 D284T17FK1 413 230/460 61.0 93.6 1.15 26.65 C, CN
25 1800 284TC GT1228A √ 3,453 284TTFCD6028 470 230/460 61.0 93.6 1.15 26.65 C, MX
Continued on next page.
Shaded model numbers are cast iron frame.
Note listing on inside back flap.
Green items are Premium Efficient. Specifications are subject to change without notice.
D - Item to be discontinued once inventory is depleted.
* F.L Amps @ 575V
Duty Motors
Automotive
Stock
ODP Motors
40 1800 324TC B199068.00 D 5,362 D324T17FK17 689 230/460 95.0 94.1 1.15 29.69 C, CN
40 1800 324TC GT1234A √ 5,362 324TTFCD6028 646 230/460 95.0 94.1 1.15 29.69 C, MX
50 3600 326TSC B199069.00 D 7,120 D326T34FK10 709 230/460 113.0 93.0 1.15 29.69 C, CN
50 3600 326TSC GT1236A √ 7,120 326TSTFCD6003 595 230/460 113.0 93.0 1.15 29.69 C, MX
50 1800 326TC B199070.00 D 6,582 D326T17FK13 742 230/460 117.0 94.5 1.15 31.19 C, CN
50 1800 326TC GT1237A √ 6,582 326TTFCD6028 702 230/460 117.0 94.5 1.15 31.19 C, MX
60 3600 364TSC B199071.00 D 9,441 D364T34FK5 900 230/460 135.0 93.6 1.15 31.19 C, CN
ODP Motors
Three Phase
60 3600 364TSC GT1239A √ 9,441 364TSTFCD6003 950 230/460 135.0 93.6 1.15 31.19 C, MX
60 1800 364TC 199072.00 D 8,987 C364T17FK1 982 230/460 138.0 95.0 1.15 36.61 C, CN
60 1800 364TC B199072.00 D 8,987 D364T17FK7 982 230/460 138.0 95.0 1.15 33.32 C, CN
60 1800 364TC GT1240A √ 8,987 364TTFCD6038 952 230/460 138.0 95.0 1.15 33.32 C, MX
75 3600 365TSC B199073.00 D 11,045 D365T34FK5 999 230/460 168.0 93.6 1.15 32.17 C, CN
75 3600 365TSC GT1242A √ 11,045 365TSTFCD6003 945 230/460 168.0 93.6 1.15 32.17 C, MX
75 1800 365TC B199074.00 D 10,828 D365T17FK8 1079 230/460 171.0 95.4 1.15 34.30 C, CN
TEFC Motors
Three Phase
75 1800 365TC GT1243A √ 10,828 365TTFCD6038 1130 230/460 171.0 95.4 1.15 34.30 C, MX
100 3600 405TSC 199075.00 D 14,287 C405T34FK1 1400 230/460 216.0 94.1 1.15 39.76 C, CN
100 3600 405TSC B199075.00 D 14,287 D405T34FK2 1400 230/460 222.0 94.1 1.15 35.77 C, CN
100 3600 405TSC GT1245A √ 14,287 405TSTFCD6003 1060 230/460 222.0 94.1 1.15 35.77 C, MX
100 1800 405TC 199076.00 D 13,003 C405T17FK1 1430 230/460 224.0 95.4 1.15 42.76 C, CN
100 1800 405TC B199076.00 D 13,003 D405T17FK5 1430 230/460 226.0 95.4 1.15 38.77 C, CN
100 1800 405TC GT1246A √ 13,003 405TTFCD6038 1317 230/460 226.0 95.4 1.15 38.77 C, MX
Inverter Duty
Tech Information
Ultimate e® / Globetrotter® General Purpose Motors
Single Phase
Stock
ODP Motors
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
3 3600 182TC 199082.00 D 1,147 C182T34FC1 77 230/460 7.6 86.5 1.15 15.75 C, CN
3 3600 182TC B199082.00 D 1,056 D182T34FC65A 77 230/460 8.0 86.5 1.15 15.85 S, CN
3 3600 182TC GT1309A √ 1,056 182TTFBD6004 83 230/460 8.0 86.5 1.15 15.85 S, MX
3 1800 182TC 199083.00 D 1,043 C182T17FC1 87 230/460 7.8 89.5 1.15 15.75 C, CN
3 1800 182TC B199083.00 D 1,043 D182T17FC65 87 230/460 8.0 89.5 1.15 15.85 S, CN
3 1800 182TC GT1310A √ 1,043 182TTFBD6029 87 230/460 8.0 89.5 1.15 15.85 S, MX
TEFC Motors
Single Phase
5 3600 184TC 199084.00 D 1,272 C184T34FC1 91 230/460 11.6 88.5 1.15 16.73 C, CN
5 3600 184TC B199084.00 D 1,171 D184T34FC46 91 230/460 12.0 88.5 1.15 16.85 S, CN
5 3600 184TC GT1312A √ 1,171 184TTFBD6004 95 230/460 12.0 88.5 1.15 16.85 S, MX
5 1800 184TC 199085.00 D 1,137 C184T17FC1 104 230/460 12.4 89.5 1.15 16.73 C, CN
5 1800 184TC B199085.00 D 1,137 D184T17FC68 104 230/460 13.0 89.5 1.15 16.85 S, CN
5 1800 184TC GT1313A √ 1,137 184TTFBD6029 110 230/460 13.0 89.5 1.15 16.85 S, MX
7 1/2 3600 213TC B199086.00 D 1,542 C213T34FC44 140 230/460 18.4 89.5 1.15 19.10 S, CN
ODP Motors
Three Phase
7 1/2 3600 213TC GT1315A √ 1,542 213TTFBD6004 242 230/460 18.4 89.5 1.15 19.10 S, MX
7 1/2 1800 213TC 199087.00 D 1,441 C213T17FC1 152 230/460 18.6 91.7 1.15 19.53 C, CN
7 1/2 1800 213TC B199087.00 D 1,347 C213T17FC43 143 230/460 19.0 91.7 1.15 19.10 C, CN
7 1/2 1800 213TC GT1316A √ 1,347 213TTFBD6029 153 230/460 19.0 91.7 1.15 19.10 S, MX
10 3600 215TC 199088.00 D 1,740 C215T34FC1 153 230/460 22.8 90.2 1.15 21.02 C, CN
10 3600 215TC B199088.00 D 1,625 C215T34FC45 152 230/460 23.6 90.2 1.15 20.70 C, CN
10 3600 215TC GT1318A √ 1,625 215TTFBD6004 151 230/460 23.6 90.2 1.15 20.70 S, MX
TEFC Motors
Three Phase
10 1800 215TC 199089.00 D 1,694 C215T17FC1 165 230/460 24.4 91.7 1.15 21.02 C, CN
10 1800 215TC B199089.00 D 1,583 C215T17FC43 272 230/460 25.0 91.7 1.15 20.70 C, CN
10 1800 215TC GT1319A √ 1,583 215TTFBD6029 165 230/460 25.0 91.7 1.15 20.70 S, MX
Note listing on inside back flap.
Shaded model numbers are cast iron frame.
Specifications are subject to change without notice.
Green items are Premium Efficient.
D - Item to be discontinued once inventory is depleted.
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Features:
• Meets or exceeds NEMA Premium® efficiencies
• Cast iron frame construction
• Class F insulation
Single Phase
ODP Motors
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
TEFC Motors
Single Phase
25 1800 284T 194228.00 D 3,447 C284T17FB9 500 230/460 61.0 93.6 1.15 26.65 C, CN
25 1800 284T B194228.00 √ 3,447 D284T17FB10 420 230/460 61.0 93.6 1.15 26.65 C, CN
25 1200 324T 194229.00 D 6,055 C324T11FB7 555 230/460 66.0 93.0 1.15 32.68 C, CN
25 1200 324T B194229.00 √ 6,055 D324T11FB8 537 230/460 64.0 93.0 1.15 29.69 C, CN
30 1800 286T 194230.00 D 4,011 C286T17FB9 525 230/460 72.5 93.6 1.15 28.14 C, CN
30 1800 286T B194230.00 √ 4,011 D286T17FB10 457 230/460 72.5 93.6 1.15 28.14 C, CN
30 1200 326T B194231.00 √ 6,496 D326T11FB8 593 230/460 76.0 93.0 1.15 31.19 C, CN
ODP Motors
Three Phase
40 1800 324T 194232.00 D 5,277 C324T17FB10 750 230/460 94.0 94.1 1.15 32.68 C, CN
40 1800 324T B194232.00 √ 5,277 D324T17FB11 590 230/460 95.0 94.1 1.15 31.19 C, CN
40 1200 364T 194233.00 D 8,987 C364T11FB8 950 230/460 94.0 94.1 1.15 36.61 C, CN
40 1200 364T B194233.00 √ 8,987 D364T11FB9 858 230/460 96.0 94.1 1.15 29.69 C, CN
50 1800 326T 194234.00 D 6,477 C326T17FB11 775 230/460 119.0 94.5 1.15 33.86 C, CN
50 1800 326T B194234.00 √ 6,477 D326T17FB12 660 230/460 117.0 94.5 1.15 33.32 C, CN
50 1200 365T 194235.00 D 10,214 C365T11FB11 1000 230/460 117.0 94.1 1.15 38.39 C, CN
TEFC Motors
50 1200 365T B194235.00 √ 10,214 D365T11FB12 915 230/460 121.0 94.1 1.15 31.19 C, CN
Three Phase
60 1800 364T 194236.00 D 8,837 C364T17FB13 1000 230/460 138.0 95.0 1.15 36.61 C, CN
60 1800 364T B194236.00 √ 8,837 D364T17FB14 853 230/460 138.0 95.0 1.15 34.30 C, CN
60 1200 404T 194237.00 D 11,968 C404T11FB8 1200 230/460 140.0 94.5 1.15 42.72 C, CN
60 1200 404T B194237.00 √ 11,968 D404T11FB9 1154 230/460 143.0 94.5 1.15 33.32 C, CN
75 1800 365T 194238.00 D 10,858 C365T17FB13 1100 230/460 170.0 95.4 1.15 38.39 C, CN
75 1800 365T B194238.00 √ 10,858 D365T17FB14 952 230/460 171.0 95.4 1.15 34.30 C, CN
75 1200 405T 194239.00 D 14,089 C405T11FB9 1300 230/460 174.0 94.5 1.15 42.72 C, CN
Inverter Duty
75 1200 405T B194239.00 √ 14,089 D405T11FB10 1242 230/460 178.0 94.5 1.15 38.77 C, CN
Motors
100 1800 405T 194240.00 D 13,271 C405T17FB11 1375 230/460 224.0 95.4 1.15 42.72 C, CN
100 1800 405T B194240.00 √ 13,271 D405T17FB12 1240 230/460 226.0 95.4 1.15 38.77 C, CN
100 1200 444T B194241.00 √ 20,774 D444T11FB10 1790 230/460 229.0 95.0 1.15 46.71 C, CN
125 1800 444T 194242.00 D 18,600 C444T17FB13 1850 460 140.0* 95.4 1.15 50.79 C, CN
125 1800 444T B194242.00 √ 18,600 D444T17FB14 1630 460 140.0* 95.4 1.15 46.71 C, CN
125 1200 445T 194243.00 D 21,678 C445T11FB7 2050 460 142.0* 95.0 1.15 50.79 C, CN
Severe Duty
125 1200 445T B194243.00 √ 21,678 D445T11FB8 1875 460 143.0* 95.0 1.15 46.71 C, CN
Motors
150 1800 445T 194244.00 D 21,841 C445T17FB16 2050 460 165.0* 95.8 1.15 50.79 C, CN
150 1800 445T B194244.00 √ 21,841 D445T17FB17 1915 460 168.5* 95.8 1.15 46.71 C, CN
150 1200 447T 194245.00 D 27,564 C447T11FB5 2500 460 170.0* 95.8 1.15 55.91 C, CN
150 1200 447T B194245.00 √ 27,564 D447T11FB10 2320 460 170.5* 95.8 1.15 55.21 C, CN
200 1800 447T 194246.00 D 26,562 C447T17FB9 2350 460 225.0* 96.2 1.15 55.91 C, CN
200 1800 447T B194246.00 √ 26,562 D447T17FB10 2190 460 219.0* 96.2 1.15 55.21 C, CN
Explosion Proof
200 1200 449T B194247.00 √ 29,357 D449T11FB6 2385 460 227.0* 95.8 1.15 55.21 C, CN
Motors
Shaded model numbers are cast iron frame. Note listing on inside back flap.
Specifications are subject to change without notice.
Green items are Premium Efficient.
D - Item to be discontinued once inventory is depleted.
* amps at 460 volts.
Duty Motors
Automotive
Tech Information
TENV Motors - Three Phase - Rigid Base
Single Phase
ODP Motors
Three Phase - TENV - Rigid Base
SYN App. F. L. “C”
TEFC Motors
Single Phase
Stock
RPM NEMA® Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/6 3600 42 092014.00 C/A 511 C42T34NB2 14 208-230/460 0.7 65.0 1.00 7.56 S, US
1/6 1800 42 092015.00 √ 559 C42T17NB1 15 208-230/460 0.9 66.0 1.00 7.56 S, US
1/4 3600 42 092016.00 C/A 588 C42T34NB3 16 208-230/460 0.9 74.0 1.00 8.06 S, US
1/4 1800 48 100123.00 √ 425 C4T17NB3 17 208-230/460 0.9 78.0 1.15 9.18 S, MX
1/4 1800 S56 101649.00 √ 425 C4T17NH8 18 208-230/460 0.9 78.0 1.15 9.56 S, MX
ODP Motors
Three Phase
1/3 3600 48 101013.00 √ 407 C4T34NB3 20 208-230/460 1.2 72.0 1.15 8.62 S, US
1/3 1800 48 100443.00 √ 471 C4T17NB5 20 208-230/460 1.2 78.0 1.15 9.68 S, MX
1/3 1800 S56 102920.00 √ 469 C4T17NH13 20 208-230/460 1.3 77.0 1.15 9.56 S, MX
1/2 3600 56 110143.00 √ 471 C6T34NB1 28 208-230/460 1.7 82.5 1.15 10.40 S, US
1/2 1800 S56 102918.00 √ 548 C4T17NH12 21 208-230/460 1.8 77.0 1.15 10.06 S, MX
3/4 1800 56 114309.00 √ 595 C6T17NB53 29 208-230/460 2.5 80.0 1.15 10.90 S, US
Note - Motors 121098.00 and 121099.00 moved to TEFC designs to meet EISA regulations. Note listing on inside back flap.
TEFC Motors
Three Phase
C/A - Check Availability. Specifications are subject to change without notice.
Inverter Duty
General Purpose Applications
Motors
Three Phase - TEFC - Rigid Base
SYN App. F. L. “C”
Stock
Severe Duty
RPM NEMA Catalog List Wgt. Amps @ % F.L. Service Dim.
Notes
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches)
3 1800 182T 132237.00 C/A 1,108 C182T17FB50 80 208-230/460 7.8 89.5 1.15 13.96 S, MX
5 1800 184T 132236.00 √ 1,219 C184T17FB62 90 208-230/460 12.6 89.5 1.15 14.96 S, MX
7 1800 213T 140832.00 C/A 1,565 C213T17FB18 154 208-230/460 21.6 91.7 1.25 18.70 S, MX
Green items are Premium Efficient. Note listing on inside back flap.
C/A - Check Availability. Specifications are subject to change without notice.
Note: For larger F2 mount motors, G150 & 170 Series cast iron motors may be converted
Explosion Proof
General Specifications:
Motors designed for air compressor, pump, fan and blower duty
applications which require high breakdown torque and rugged
mechanical construction.
Single Phase
ODP Motors
Mechanical Features:
• Double shielded ball bearings
• Designed for belted loads
• Class F insulation
TEFC Motors
Single Phase
5 1800 182T 131464.00 √ 1,219 C184T17FB42 87 208-230/460 12.6 89.5 1.15 14.96 S, MX, T
5 1800 182T LM33266 √ 1,219 SSF4B5T61 85 208-230/460 12.6 89.5 1.15 14.96 S, MX
7 1⁄2 1800 213T 140450.00 √ 1,565 C213T17FB6 153 208-230/460 21.6 91.7 1.25 18.70 S, MX, T
7 1⁄2 1800 213T LM32805 √ 1,446 SSF4B7.5T6 129 208-230/460 19.4 91.7 1.25 20.23 S, MX
10 1800 215T 140451.00 √ 1,893 C215T17FB18 161 208-230/460 26.8 91.7 1.25 19.70 S, MX, T
10 1800 215T LM32809 √ 1,784 SSF4B10T6 168 208-230/460 26.0 91.7 1.25 21.48 S, MX
15 1800 254T 170066.60 √ 2,874 C254T17FB10 290 208-230/460 37.0 92.4 1.25 23.19 C, CN, T
TEFC Motors
15 1800 254T LM24208 √ 3,119 CCF4B15T6 360 208-230/460 37.5 92.4 1.25 23.52 C, US
Three Phase
20 1800 256T 170007.60 √ 3,596 C256T17FB4 332 208-230/460 50.0 93.0 1.15 24.92 C, CN, T
Note listing on inside back flap.
Shaded model numbers are cast iron frame.
Specifications are subject to change without notice.
Green items are Premium Efficient.
Note T - N/C T-stats
Inverter Duty
Mechanical Features:
Severe Duty
Tech Information
Sub-FHP Motors - Inverter Rated - Three Phase
Single Phase
ODP Motors
induced by variable frequency drives range from the printed motor’s speed range
• Double shielded motor ball bearings
• Needle bearings in the parallel shaft gearboxes
• Ball bearings in the right angle (worm) gearboxes
• Steel conduit box provided as standard
• Finished in high gloss hardened black enamel paint
TEFC Motors
Single Phase
Three Phase - 230 Volt - Totally Enclosed - C Face With Base
SYN App.
Stock
ODP Motors
Three Phase
1/6 1725 38 M1140173.00 C/A 464 CM38T17NK2 8 0.7 S, US, 13
1/4 1725 38 M1140172.00 C/A 542 CM38T17FK3 9 1.1 S, US, 13
C/A - Check Availability. Note listing on inside back flap.
Note 12 - TENV. Specifications are subject to change without notice.
Note 13 - TEFC.
TEFC Motors
Three Phase
Catalog
Number AG P U AH BB AJ TAP R AK BB D BA E F H
M1140171.00 5.14 3.85 0.5 1.63 1 3.75 1/3/16 4.25 3.0 0.1 3.00 1.50 2.125 1.375 11/32 Slot
M1140173.00 6.14 3.85 0.5 1.63 1 3.75 1/3/16 4.25 3.0 0.1 3.00 1.50 2.125 1.375 11/32 Slot
M1140172.00 7.56 4.43 0.5 1.63 1 3.75 1/3/16 4.25 3.0 0.1 3.00 1.50 2.125 1.375 11/32 Slot
Inverter Duty
Specifications are subject to change without notice.
Motors
AC 38 48C ALL DIMENSIONS IN INCHES
"P"
"AG" "AH" 2.63
MOTOR LEADS
6.00 LG MIN 3.13
Severe Duty
Motors
"BB" "N" TAP
FLAT
NAMEPLATE
45∞
"AK"
"U"
FLAT
.47
45∞
Explosion Proof
"D"
Motors
"E" "E"
"F" "F" "BA" "H"
Both motors and gearmotors will have inverter rated printed on the nameplate.
UL and CSA recognition for both motors only and gearmotors.
Duty Motors
Automotive
Features:
• Compact 48-frame design with keyed shaft
• Class F insulation
• 20:1 constant torque rated
• Inverter IRIS® insulation system
Single Phase
ODP Motors
Green items are Premium Efficient. Note listing on inside back flap.
C/A - Check Availability. Specifications are subject to change without notice.
TEFC Motors
Three Phase
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Single Phase
ODP Motors
TEFC Motors
Single Phase
ODP Motors
Three Phase
TEFC Motors
Three Phase
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
To turn your idea or project into reality, call your local sales office or visit regalbeloit.com/Brands/LEESON
79
Tech Information Inverter Duty Motors
Single Phase
ODP Motors
TEFC Motors
Single Phase
Applications:
For use in constant torque (conveyors and machine tools) or variable torque (pumps and fans)
variable speed applications within the stated speed range of the motor.
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
80
Inverter Duty Motors
Tech Information
Inverter Duty Motors / Vector Duty Motors
2000:1 Speed Range
With Encoder Mounting Provisions
Single Phase
ODP Motors
Features:
• Class H inverter insulation system on LEESON® motor models, Class F on Lincoln Motors models
• No blower needed on 256T frame and smaller motors
• Constant torque operation from 0 to base RPM rating with vector drives
• C Face with rigid base through 100 HP on LEESON motor models, Lincoln Motors models through 5 HP
TEFC Motors
Single Phase
• TEBC designs utilize 3-phase blower motors
• Normally closed thermostats
• Cast iron, steel and aluminum frame construction - see Notes
• Provisions for Encoder feedback devices - all LEESON and Lincoln Motors Q10 models
• LEESON motor models, 180 frame and higher, include internal shaft grounding rings (SGRs)
• Precision balanced rotors
• UL recognized and CSA certified
ODP Motors
Three Phase
Three Phase - Totally Enclosed - Rigid Base & Rigid C Face
For use with inverters only
SYN App. F. L. “C” Inverter
Stock
RPM NEMA® Catalog List Wgt. Amps @ Max. Service Dim. Speed
TEFC Motors
Three Phase
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V RPM Factor (Inches) Range Notes
1/3 1800 56C LM10336 √ 692 SRF4S0.33TC61Q20 22 230/460 1.6 4000 1.0 11.31 10:1 S, US, 13
1/2 1800 56C LM24264 C/A 797 SRF4S0.5TC61Q20 24 230/460 2.4 4000 1.0 11.81 10:1 S, US, 13
1/2 1200 56HC LM10338 C/A 947 SRF6S0.5TC61Q20 41 230/460 2.6 4000 1.0 12.32 10:1 S, US, 13
3/4 1800 56HC LM10339 √ 899 SRF4S0.75TC61Q20 25 230/460 3.0 4000 1.0 11.82 10:1 S, US, 13
1 1800 56HC LM10340 √ 1,729 SRF4S1TC61Q20 27 230/460 3.6 4000 1.0 12.32 10:1 S, US, 13
1 1800 143TC 810548.00 √ 1,829 143THTN8037 64 230/460 3.0 5400 1.0 13.68 2000:1 C, US, 12
Inverter Duty
1 1800 145TC LM26359 √ 1,752 SSN4S1TC61Q10 52 230/460 4.0 5000 1.0 15.39 2000:1 S, US, 12
Motors
1 1200 182TC LM06103 √ 1,982 AAN6S1TC61Q10 78 230/460 3.6 4800 1.0 12.94 2000:1 A, US, 12
1 900 184TC LM06105 C/A 2,473 AAN8S1TC61Q10 100 230/460 5.0 4800 1.15 16.57 2000:1 A, US, 12
1 1⁄2 1800 145TC 810547.00 √ 2,014 145THTN8044 64 230/460 4.6 5400 1.0 14.68 2000:1 C, US, 12
1 1⁄2 1800 145TC LM26233 C/A 1,944 SSN4S1.5TC61Q10 67 230/460 4.8 5000 1.0 15.39 2000:1 S, US, 12
1 1⁄2 1200 56HC 119796.00 √ 1,007 C6T11FK18 46 230/460 5.7 4000 1.0 12.98 2:1 S, US, 13
1 1⁄2 1200 145TC 122337.00 √ 1,102 C145T11FK11 42 230/460 5.7 4000 1.0 13.42 2:1 S, US, 13
2 1800 145TC 810546.00 √ 2,103 145THTN8045 70 230/460 6.0 5400 1.0 14.68 2000:1 C, US, 12
Severe Duty
2 1800 182TC LM33591 C/A 2,111 AAN4S2TC61Q10AP26 74 230/460 8.2 4800 1.0 15.88 2000:1 A, MX, 12
Motors
3 1800 182TC 811320.00 √ 2,512 182THTS8051 117 230/460 8.0 5400 1.0 16.68 2000:1 C, US, 12
3 1800 56HC 119797.00 √ 1,085 C6T17FK116 47 230/460 8.6 4000 1.0 13.48 2:1 S, US, 13
3 1800 145TC 122338.00 √ 1,196 C145T17FK84 47 230/460 8.6 4000 1.0 13.92 2:1 S, US, 13
3 1800 184TC LM33492 C/A 2,455 AAN4S3TC61Q10AP26 78 230/460 8.2 4800 1.0 15.88 2000:1 A, MX, 12
3 1200 215TC LM06121 C/A 3,915 AN5S3TC61Q10 152 230/460 12.2 4600 1.0 20.54 2000:1 A, US, 12
Explosion Proof
Stock
RPM NEMA® Catalog List Wgt. Amps @ Max. Service Dim. Speed
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V RPM Factor (Inches) Range Notes
5 1800 184TC 811322.00 √ 2,784 184THTS8058 120 230/460 13.4 5400 1.0 17.68 2000:1 C, US, 12
5 1800 213TC LM06125 √ 2,817 AN4S5TC61Q10 115 230/460 15.6 4600 1.0 17.94 2000:1 A, US, 12
7 1/2 1800 213TC 810157.00 √ 3,746 213THTS8070 220 230/460 21.0 4200 1.0 20.56 2000:1 C, US, 12
10 1800 215TC 810140.00 √ 4,426 215THTS8070 300 230/460 26.0 4200 1.0 21.81 2000:1 C, US, 12
TEFC Motors
Single Phase
15 1800 254TC 810066.00 √ 5,306 254THTNA8060 325 230/460 40.5 4200 1.0 23.38 2000:1 C, US, 12
15 1200 284TC 810068.00 C/A 11,206 284THTPA7090 456 230/460 40.0 3600 1.0 37.81 2000:1 C, US, 11
20 1800 256TC 810007.00 √ 7,230 256THTNA8070 435 230/460 52.0 4200 1.0 27.13 2000:1 C, US, 12
20 1200 286TC 810001.00 C/A 13,424 286THFPA8090 450 230/460 52.5 3600 1.0 39.31 2000:1 C, US, 11
25 1800 284TC 810011.00 C/A 9,010 284THFPA8060 409 230/460 63.0 3600 1.0 37.81 2000:1 C, US, 11
25 1200 324TC 810003.00 C/A 15,794 324THFPA8090 630 230/460 67.0 3600 1.0 40.41 2000:1 C, US, 11
30 1800 286TC 810015.00 √ 9,922 286THFPA8040 530 230/460 74.0 4200 1.0 39.31 2000:1 C, US, 11
ODP Motors
Three Phase
30 1200 326TC 810005.00 C/A 17,380 326THFPA8090 696 230/460 80.5 3600 1.0 41.91 2000:1 C, US, 11
40 1800 324TC 810019.00 C/A 12,549 324THFPA8050 620 230/460 100.0 3600 1.0 40.41 2000:1 C, US, 11
40 1200 364TC 810096.00 √ 20,959 364THFS18079 995 230/460 107.0 2700 1.0 42.67 2000:1 C, US, 11
50 1800 326TC 810023.00 C/A 14,802 326THFPA8040 650 230/460 120.0 3600 1.0 41.91 2000:1 C, US, 11
50 1200 365TC 810097.00 C/A 25,126 365THFS8397 1,121 230/460 130.0 2700 1.0 43.67 2000:1 C, US, 11
60 1800 364TC 810027.00 √ 19,051 364THFS8059 995 230/460 147.0 2700 1.0 42.67 2000:1 C, US, 11
60 1200 404TC 810098.00 C/A 27,874 404THFS8378 1,000 230/460 142.0 2700 1.0 48.22 2000:1 C, US, 11
75 1800 365TC 810031.00 √ 22,845 365THFS8074 1,070 230/460 180.0 2700 1.0 43.67 2000:1 C, US, 11
TEFC Motors
Three Phase
75 1200 405TC 810099.00 C/A 33,962 405THFS8386 1,370 230/460 180.0 2700 1.0 49.72 2000:1 C, US, 11
100 1800 405TC 810087.00 C/A 27,832 405THFS8329 1,420 230/460 230.0 2700 1.0 49.72 2000:1 C, US, 11
100 1200 444TC 811367.00 C/A 38,500 444THFN8389 2,082 230/460 250.0 2700 1.0 52.72 2000:1 C, US, 11
125 1800 444T 811369.00 C/A 35,097 444THFN8050 2,020 460 138* 2700 1.0 52.85 2000:1 C, US, 11
150 1800 445T 811371.00 C/A 39,822 445THFN8334 2,341 460 170* 2700 1.0 54.85 2000:1 C, US, 11
200 1800 445T 810503.00 C/A 47,137 445THFN8335 2,500 460 230* 2700 1.0 54.85 2000:1 C, US, 11
250 1800 449T 811516.00 C/A 62,450 449THFS8328 3,200 460 295* 2700 1.0 64.34 2000:1 C, US, 11
Inverter Duty
300 1800 449T 811529.00 C/A 79,163 449THFS8329 3,410 460 327* 2700 1.0 63.35 2000:1 C, US, 11
Motors
350 1800 449T 811530.00 C/A 96,560 449THFS8330 3,520 460 385* 2700 1.0 64.34 2000:1 C, US, 11
Note listing on inside back flap.
Shaded model numbers are cast iron frame.
Specifications are subject to change without notice.
*F.L. Amps at 460 Volts.
C/A - Check Availability.
Note 11 - TEBC.
Note 12 - TENV.
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Tech Information
Encoder Kits For Speedmaster® 81,000 Series 2000:1 Motors
Single Phase
ODP Motors
Description Enclosure Frame Brand/Model PPR Catalog Number List Price
Encoders
Modular Mount, 5-15 VDC, with EPIC connector TENV 143-256T Northstar® SL56 1024 E175927.00 4,056
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T Dynapar® HS35 1024 E175928.00 2,605
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T BEI® HS35 1024 E175929.00 2,605
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T Dynapar HS35 2048 E175930.00 2,605
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T BEI HS35 2048 E175931.00 2,605
TEFC Motors
Single Phase
Modular Mount, 5-15 VDC (Encoder Conduit Box Required) TEBC 284-449T Northstar SL56 1024 E175921.00 4,056
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T Dynapar HS35 1024 E175922.00 2,605
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T BEI HS35 1024 E175923.00 2,605
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T Dynapar HS35 2048 E175924.00 2,605
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T BEI HS35 2048 E175925.00 2,605
Conduit Box Required for all TEBC Units — — — — ECB175926.00 289
All Encoders are shipped separate for field installation.
ODP Motors
Three Phase
TEFC Motors
Three Phase
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Applications:
Designed for inverter or vector duty applications where up to a
1000:1 constant torque speed range is required. Typical applications
Single Phase
ODP Motors
Features:
• IRIS® inverter duty insulation system
TEFC Motors
Single Phase
Stock
1 1800 143TC 122168.00 ♦ √ 1,150 C143T17NC4 43 230/460 3.2 1.0 12.49 S, MX, ♦
1 1200 145TC 122130.00 √ 1,362 C143T11NK3 49 230/460 3.8 1.0 16.04 S, MX
1 1/2 1800 145TC 122131.00 √ 1,313 C145T17NK6 50 230/460 4.8 1.0 16.04 S, MX
2 1800 145TC 122132.00 √ 1,692 C145T17NK5 52 230/460 6.0 1.0 16.04 S, MX
2 1200 184TC 811618.00 √ 2,597 184THTL17079 89 230/460 6.6 1.0 16.94 A, MX
3 1800 182TC 811619.00 √ 2,249 182THTY17054 79 230/460 8.4 1.0 17.39 A, MX
3 1200 213TC 811621.00 √ 3,197 213THTL17081 123 230/460 9.4 1.0 19.94 A, US
Severe Duty
5 1800 184TC 811625.00 √ 2,687 184THTY17045 146 230/460 13.4 1.0 20.54 A, MX
Motors
5 1200 215TC 811624.00 √ 3,891 215THTL17086 137 230/460 15.4 1.0 20.54 A, US
7 1/2 1800 213TC 811622.00 √ 3,528 213THTL17044 195 230/460 21.0 1.0 20.54 A, US
7 1/2 1200 254TC 811627.00 √ 5,233 254THTL17081 225 230/460 22.0 1.0 25.37 A, US
10 1800 215TC 811628.00 √ 4,219 215THTL17047 219 230/460 27.0 1.0 23.04 A, US
10 1200 256TC 811630.00 √ 5,923 256THTL17083 239 230/460 28.0 1.0 26.87 A, US
15 1800 254TC 811631.00 √ 5,021 254THTL17049 240 230/460 40.0 1.0 26.87 A, US
Explosion Proof
20 1800 256TC 811633.00 √ 7,329 256THTNA16034 390 230/460 52.0 1.0 27.13 C, US
Motors
25 1800 284TC 811635.00 √ 7,971 284THTNA16039 488 230/460 62.0 1.0 27.08 C, US
30 1800 286TC 811637.00 √ 8,990 286THTNA17042 541 230/460 74.0 1.0 28.58 C, US
Tech Information
Vector Duty Motors - 2000:1 Speed Range
With 1024 ppr Encoder
Features:
• Inverter duty insulation system
• Constant HP range at 2x base speed 56 - 256T frames
Single Phase
ODP Motors
• Constant HP range at 1.5x base speed 284T - 445T frames
• Includes 1024 ppr encoder with differential line driver
• Normally closed thermostats
• Steel and aluminum frame construction - see notes
• C Face designs through 10 HP
• Precision balanced rotors
TEFC Motors
Single Phase
Three Phase - Totally Enclosed - Rigid Base & Rigid C Face
For use with inverters only
SYN App. F. L. “C” Inverter
Stock
ODP Motors
Three Phase
RPM NEMA® Catalog List Wgt. Amps @ Max. Service Dim. Speed
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V RPM Factor (Inches) Range Notes
1/3 1800 56C LM10346 √ 2,613 SRN4S0.33TC61Q15 43 208-230/460 1.0 5000 1.00 14.47 2000 : 1 S, US, 12
1/2 1800 56C LM10347 √ 2,727 SRN4S0.5TC61Q15 43 208-230/460 1.6 5000 1.00 14.47 2000 : 1 S, US, 12
3/4 1800 56HC LM10349 C/A 2,821 SRN4S0.75TC61Q15 54 208-230/460 2.6 5000 1.00 15.97 2000 : 1 S, US, 12
1 1800 56HC LM10350 C/A 4,178 SRN4S1TC61Q15 54 208-230/460 3.2 5000 1.00 15.97 2000 : 1 S, US, 12
1 1800 145TC LM26109 C/A 3,847 SSN4S1TC61Q15 82 208-230/460 3.0 5000 1.00 16.03 2000 : 1 S, US, 12
1 1/2 1800 145TC LM26278 C/A 4,133 SSN4S1.5TC61Q15 85 208-230/460 4.8 5000 1.00 17.03 2000 : 1 S, US, 12
TEFC Motors
Three Phase
2 1800 182TC LM33595 √ 4,259 AAN4S2TC61Q15AP26 98 208-230/460 6.6 5400 1.00 19.84 2000 : 1 A, US, 12
3 1800 184TC LM33491 √ 4,479 AANS3TC61Q15AP26 92 208-230/460 8.2 5400 1.00 19.84 2000 : 1 A, MX, 12
5 1800 213TC LM04003 C/A 4,969 AAN4S5TC61Q15 115 208-230/460 15.6 4600 1.00 21.14 2000 : 1 A, US, 12
7 1/2 1800 215TC LM31463 C/A 5,906 AN4S7.5TC61Q15 155 208-230/460 21.0 4600 1.00 22.54 2000 : 1 A, US, 12
10 1800 256TC LM30572 C/A 6,215 AN4S10TC61Q15 235 208-230/460 27.0 4400 1.00 — 2000 : 1 A, US, 12
25 1800 284T 811639.00 C/A 9,166 284THFPA17034 438 208-230/460 65.0 3600 1.00 37.48 2000 :1 C, US, 11
30 1800 286T 811640.00 C/A 10,223 286THFPA18043 520 208-230/460 74.0 4200 1.00 38.98 2000 :1 C, US, 11
Inverter Duty
40 1800 324T LM03285 C/A 14,772 SB4H40T61Q15 550 208-230/460 98.0 4000 1.00 43.41 2000 : 1 S, US, 11
Motors
50 1800 326T LM03333 C/A 14,981 SB4H50T61Q15 550 208-230/460 — 4000 1.00 — 2000 : 1 S, US, 11
60 1800 364T LM03377 C/A 18,696 SB4H60T61YQ15 690 208-230/460 146.0 3800 1.00 48.29 2000 : 1 S, US, 11
75 1800 365T LM03425 C/A 21,606 SB4P75T61YQ15 740 208-230/460 180.0 3800 1.00 49.29 2000 : 1 S, US, 11
100 1800 405T LM03473 C/A 31,437 SB4H100T61YQ15 1,000 208-230/460 240.0 3600 1.00 53.23 2000 : 1 S, US, 11
Severe Duty
*F.L. Amps at 460 Volts.
Motors
C/A - Check Availability.
Note 11 - TEBC.
Note 12 - TENV.
Explosion Proof
Motors
Duty Motors
Automotive
Product Line
Discontinued
Features: Once Stock is
• Inverter duty insulation system Depleted
• Constant HP range at 2x base speed 56 - 256T frames
Single Phase
ODP Motors
RPM NEMA® Catalog List Wgt. Amps @ Max. Service % F.L. Dim. Speed
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V RPM Factor Eff. (Inches) Range Notes
1 1800 56 LM22660 √ 860 SRF4S1T61Q40 28 230/460 3.6 4000 1.00 78.5 12.32 4:1 S, US
ODP Motors
Three Phase
1 1/2 1800 145T LM26098 C/A 976 SSF4P1.5T61Q40 40 230/460 5.0 4000 1.00 84.0 13.87 4:1 S, US
2 1800 145T LM25991 C/A 1,016 SSF4P2T61Q40 46 230/460 6.0 4000 1.00 84.0 14.37 4:1 S, US
3 3600 182T LM21189 C/A 1,338 AAF2P3T61Q40 83 230/460 7.4 4000 1.00 85.5 14.19 4:1 A, US
3 1800 182T LM21190 C/A 1,234 AAF4P3T61Q40 83 230/460 8.4 4000 1.00 87.5 14.19 4:1 A, US
5 3600 184T LM21192 C/A 1,555 AAF2P5T61Q40 92 230/460 12.4 4000 1.00 87.5 15.19 4:1 A, US
5 1800 184T LM21193 √ 1,372 AAF4P5T61Q40 92 230/460 13.4 4000 1.00 87.5 16.19 4:1 A, US
7 1/2 3600 213T LM21195 C/A 2,101 AF2P7.5T61Q40 127 230/460 18.0 4600 1.00 88.5 18.30 4:1 A, US
TEFC Motors
Three Phase
7 1/2 1800 213T LM21196 √ 1,948 AF4P7.5T61Q40 127 230/460 20.0 4600 1.00 89.5 17.34 4:1 A, US
10 3600 215T LM21198 C/A 2,300 AF2P10T61Q40 138 230/460 23.6 4600 1.00 89.5 18.25 4:1 A, US
10 1800 215T LM21199 √ 2,140 AF4P10T61Q40 163 230/460 25.4 4600 1.00 89.5 18.84 4:1 A, US
15 3600 254T LM21201 C/A 3,071 AAF2P15T61Q40 198 230/460 35.0 4400 1.00 90.2 23.40 4:1 A, US
15 1800 254T LM21202 √ 2,909 AF4P15T61Q40 209 230/460 39.0 4400 1.00 91.0 23.40 4:1 A, US
20 3600 256T LM21204 C/A 3,522 AF2P20T61Q40 236 230/460 47.0 4400 1.00 90.2 26.10 4:1 A, US
20 1800 256T LM21205 C/A 3,370 AF4P20T61Q40 236 230/460 50.0 4400 1.00 91.0 25.15 4:1 A, US
Inverter Duty
25 1800 284T LM21208 C/A 4,678 AF4P25T61YQ40 363 230/460 64.0 4200 1.00 92.4 26.62 4:1 A, US
Motors
30 1800 286T LM21211 C/A 5,177 AF4P30T61YQ40 465 230/460 80.0 4200 1.00 92.4 28.12 4:1 A, US
40 1800 324T LM21214 √ 8,093 SF4P40T61YQ40 504 230/460 106.0 4000 1.00 93.0 28.50 4:1 S, US
50 1800 326T LM21217 C/A 8,859 SF4P50T61YQ40 558 230/460 129.0 4000 1.00 93.0 30.00 4:1 S, US
60 1800 364T LM21220 C/A 11,829 SF4P60T61YQ40 765 230/460 145.0 3800 1.00 93.6 31.90 4:1 S, US
75 1800 365T LM21223 C/A 15,027 SF4P75T61YQ40 822 230/460 187.0 3800 1.00 94.1 32.90 4:1 S, US
100 1800 405T LM21227 C/A 19,463 SF4P100T61YQ40 1,002 230/460 240.0 3600 1.00 94.5 38.40 4:1 S, US
125 1800 444T LM21230 C/A 24,181 SF4P125T64YQ40 1,351 460 146* 3000 1.00 94.5 41.58 4:1 S, US
Severe Duty
Motors
150 1800 445T LM21233 C/A 27,972 SF4P150T64YQ40 1,504 460 168* 3000 1.00 95.0 43.58 4:1 S, US
200 1800 445T LM21236 C/A 33,276 SF4P200T64YQ40 1,504 460 228* 3000 1.00 95.0 43.58 4:1 S, US
250 1800 447T LM21238 C/A 35,340 SF4P250T64YQ40 1,812 460 283* 2800 1.00 95.0 47.08 4:1 S, US
300 1800 449T LM21239 C/A 43,341 SF4P300T64YQ40 2,315 460 349* 2800 1.00 95.4 52.08 4:1 S, US
Tech Information
Lincoln Motors™ Inverter Duty Motors- 4:1 Speed Range - Totally Enclosed
Single Phase
ODP Motors
Stock
RPM NEMA® Catalog List Wgt. Amps @ Max. Service % F.L. Dim. Speed
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V RPM Factor Eff. (Inches) Range Notes
1/3 1800 56C LM22645 √ 775 SRF4S0.33TC61Q40 33 230/460 1.6 4000 1.0 65.5 11.31 4:1 S, US
1/2 1800 56C LM22649 √ 885 SRF4S0.5TC61Q40 33 230/460 2.4 4000 1.0 68.0 11.81 4:1 S, US
3/4 3600 56C LM22653 C/A 795 SRF2S0.75TC61Q40 33 230/460 3.4 4000 1.0 74.0 11.81 4:1 S, US
3/4 1800 56C LM22655 C/A 975 SRF4S0.75TC61Q40 33 230/460 3.0 4000 1.0 75.5 11.81 4:1 S, US
3/4 1200 56C LM22657 C/A 1,054 SRF6S0.75TC61Q40 33 230/460 3.4 4000 1.0 77.0 12.81 4:1 S, US
TEFC Motors
Single Phase
1 3600 56C LM22659 C/A 898 SRF2S1TC61Q40 33 230/460 3.7 4000 1.0 74.0 11.81 4:1 S, US
1 1800 56C LM22661 √ 920 SRF4S1TC61Q40 31 230/460 3.0 4000 1.0 82.5 12.81 4:1 S, US
1 1800 143TC LM26081 C/A 1,031 SSF4P1TC61Q40 48 230/460 3.0 4000 1.0 82.5 12.87 4:1 S, US
1 1200 145TC LM26323 C/A 1,231 SSF6P1TC61Q40 48 230/460 3.8 4000 1.0 80.0 14.95 4:1 S, US
1 1/2 1800 56HC LM22665 C/A 1,011 SRF4S1.5TC61Q40 41 230/460 5.0 4000 1.0 78.5 13.32 4:1 S, US
1 1/2 1800 145TC LM26008 C/A 1,039 SSF4P1.5TC61Q40 57 230/460 4.8 4000 1.0 85.5 13.87 4:1 S, US
2 1800 145TC LM25962 √ 1,106 SSF4P2TC61Q40 57 230/460 6.0 4000 1.0 85.5 14.37 4:1 S, US
3 3600 182TC LM22826 C/A 1,437 AAF2P3TC61Q40 74 230/460 7.4 4000 1.0 85.5 14.83 4:1 A, US
ODP Motors
Three Phase
3 1800 182TC LM22827 √ 1,332 AAF4P3TC61Q40 91 230/460 8.4 4000 1.0 87.5 14.83 4:1 A, US
5 1800 184TC LM22830 C/A 1,477 AAF4P5TC61Q40 131 230/460 13.4 4000 1.0 87.5 16.83 4:1 A, US
7 1/2 1800 213TC LM22833 C/A 1,847 AAF4P7.5TC61Q40 138 230/460 20.0 4600 1.0 89.5 17.95 4:1 A, US
10 1800 215TC LM22836 C/A 2,140 AF4P10TC61Q40 150 230/460 25.4 4600 1.0 90.2 19.57 4:1 A, US
15 1800 254TC LM22839 C/A 3,063 AF4P15TC61Q40 221 230/460 39.0 4400 1.0 91.0 23.4 4:1 A, US
20 1800 256TC LM22841 √ 3,523 AF4P20TC61Q40 248 230/460 50.0 4400 1.0 91.0 25.75 4:1 A, US
TEFC Motors
Three Phase
Specifications are subject to change without notice.
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Features:
• Variable torque speed range with open loop drive of 0-60 Hz
• Constant horsepower speed range of 2x base speed
• Ultimate Spike DefenseTM Insulation System
Single Phase
ODP Motors
RPM NEMA® Catalog List Wgt. Amps @ Max. Service % F.L. Dim. Speed
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V RPM Factor Eff. (Inches) Range Notes
1 1800 143T LM21148 C/A 890 SSD4P1T61Q40 55 208-230/460 3.1 5000 1.0 82.5 12.49 10:1 S, US
ODP Motors
Three Phase
1 1/2 1800 145T LM21151 C/A 928 SSD4P1.5T61Q40 68 208-230/460 4.4 5000 1.0 84.0 12.49 10:1 S, US
2 1800 145T LM21153 C/A 980 SSD4P2T61Q40 68 208-230/460 5.8 5000 1.0 84.0 12.99 10:1 S, US
3 1800 182T LM21157 C/A 1,109 SSD4P3T61Q40 82 208-230/460 8.6 4800 1.0 86.5 13.72 10:1 S, US
5 1800 184T LM21159 C/A 1,419 SSD4P5T61Q40 71 208-230/460 13.2 4800 1.0 87.5 13.19 10:1 S, US
7 1/2 1800 213T LM21162 C/A 1,628 SSD4P7.5T61Q40 156 208-230/460 19.4 4600 1.0 90.2 17.29 10:1 S, US
10 1800 215T LM21165 √ 1,914 SSD4P10T61Q40 144 208-230/460 25.0 4600 1.0 89.5 17.29 10:1 S, US
15 1800 254T LM21168 √ 2,733 SSD4P15T61Q40 245 208-230/460 41.0 4400 1.0 91.7 22.32 10:1 S, US
TEFC Motors
20 1800 256T LM21171 C/A 3,025 SSD4P20T61Q40 255 208-230/460 52.0 4400 1.0 91.0 22.32 10:1 S, US
Three Phase
25 1800 284T LM29579 C/A 3,972 CCD4P25T61YQ40 350 208-230/460 61.0 4000 1.0 91.7 23.49 10:1 C, US
30 1800 286T LM29936 C/A 4,520 CCD4P30T61YQ40 400 208-230/460 72.0 4000 1.0 92.4 24.99 10:1 C, US
40 1800 324T LM21180 √ 6,963 SD4P40T61YQ40 469 208-230/460 106 4000 1.0 93.0 25.82 10:1 S, US
50 1800 326T LM21118 C/A 7,776 SD4P50T61YQ40 522 208-230/460 130 4000 1.0 93.0 27.51 10:1 S, US
60 1800 364T LM21121 C/A 10,040 SD4P60T61YQ40 595 208-230/460 145 3600 1.0 93.6 28.40 10:1 S, US
75 1800 365T LM21124 C/A 14,087 SD4P75T61YQ40 763 208-230/460 176 3800 1.0 95.0 32.90 10:1 S, US
100 1800 404T LM21127 C/A 14,144 SD4P100T61YQ40 882 208-230/460 244 3600 1.0 94.1 31.81 10:1 S, US
Inverter Duty
125 1800 405T LM30727 C/A 14,343 SD4P125T61YQ40 958 208-230/460 304 3600 1.0 95.4 33.31 10:1 S, US
Motors
Tech Information
Sub-FHP Motors - Inverter Rated - Three Phase
Single Phase
ODP Motors
induced by variable frequency drives range from the printed motor’s speed range
• Double shielded motor ball bearings
• Steel conduit box provided as standard
• Finished in high gloss hardened black enamel paint
TEFC Motors
Single Phase
SYN App.
Stock
ODP Motors
Three Phase
C/A - Check Availability. Note listing on inside back flap.
Note 12 - TENV. Specifications are subject to change without notice.
Catalog
TEFC Motors
Three Phase
Number AG P U AH BB AJ TAP R AK BB D BA E F H
M1140171.00 5.14 3.85 0.5 1.63 1 3.75 1/4-20 4.3 3.0 0.13 3.0 2.50 2.125 1.375 11/32 Slot
M1140173.00 6.14 3.85 0.5 1.63 1 3.75 1/4-20 4.3 3.0 0.13 3.0 2.50 2.125 1.375 11/32 Slot
M1140172.00 7.56 4.43 0.5 1.63 1 3.75 1/4-20 4.3 3.0 0.13 3.0 2.50 2.125 1.375 11/32 Slot
AC 38 48C
Inverter Duty
ALL DIMENSIONS IN INCHES
Motors
"P"
"AG" "AH" 2.63
MOTOR LEADS
6.00 LG MIN 3.13
NAMEPLATE
45∞
Severe Duty
Motors
"AK"
"U"
FLAT
.47
45∞
"D"
"E" "E"
"F" "F" "BA" "H"
Explosion Proof
Both motors only and gearmotors will have inverter rated printed on the nameplate.
Motors
Features:
• Ultra Efficient™ Premium-Plus exceeds NEMA
Premium (IE4)
• Class H IRIS insulation system
• Cast iron construction for rigidity and reduced vibration
• Normally closed thermostats (One per phase, Class F)
• High power density, low weight design
TEFC Motors
Three Phase
• UL,CSA and CE
• Optional terminal block
• Provisions for shaft grounding ring
• Requires an AC inverter for operation
Inverter Duty
Motors
1/3 1800 S56C 103757.00 √ 681 48PNRA20203 14 230/460 90 1.2/.6 84.0 0.963 7.82 S, MX
Motors
1/2 1800 S56C 103758.00 √ 819 48PNRA20204 15 230/460 90 1.5/.75 83.5 1.5 7.82 S, MX
3/4 1800 S56C 103759.00 √ 875 48PNRA20205 18 230/460 90 1.9/.94 85.5 2.2 8.82 S, MX
1 1800 S56C 103760.00 √ 949 48PNRA20206 18 230/460 90 3.44/1.71 85.3 2.9 8.82 S, MX
1,5 1800 S56C 104008.00 √ 1,154 48PNRA20207 23 230/460 90 5.4/2.7 86.1 4.4 9.68 S, MX
2 1800 S56C 103761.00 √ 1,527 48PNRA20208 28 230/460 90 6.32/3.16 86.5 5.8 10.68 S, MX
3 1800 182TC 132293.00 √ 3,607 182TPFSA20017 133 460 150 3.9 91.7 8.8 16.63 C, US
Explosion Proof
5 1800 184TC 132294.00 C/A 4,605 184TPFSA20018 142 460 150 6.4 91.7 14.6 16.63 C, US
7,5 1800 213TC 140840.00 √ 5,584 213TPFSA20027 152 460 150 9.4 93.0 21.9 20.16 C, US
Motors
10 1800 215TC 140841.00 √ 5,835 215TPFSA20028 166 460 150 11.7 93.6 29.2 20.16 C, MX
15 1800 254TC 825201.00 √ 6,684 254TPFSA20057 204 460 120 18.0 94.5 43.8 25.77 C, MX
20 1800 256TC 825202.00 √ 7,112 256TPFSA20058 253 460 120 24.0 95.0 58.3 25.68 C, MX
25 1800 284TC 825203.00 √ 8,534 284TPFSA20059 396 460 120 30.0 95.0 72.9 26.21 C, MX
30 1800 286TC 825204.00 √ 8,730 286TPFSA20060 454 460 120 35.5 95.4 87.5 27.71 C, MX
40 1800 286TC 825387.00 √ 10,612 286TPFSA20125 474 460 120 47.5 95.8 116.7 27.71 C, MX
Duty Motors
Automotive
Tech Information
For use with PMAC or AC induction motors
Single Phase
ODP Motors
For more information,
TEFC Motors
Single Phase
please see pages 390-393
of this catalog.
ODP Motors
Three Phase
Platinum eTM Platinum eTM
VSD VSD - Plus
Power Range 1/3 - 3 HP 1/3 - 30 HP
Voltages 230/240 Volts 1 or 3 phase / 400/480 Volts 230/240 Volts 1 or 3 phase / 400/480 Volts
TEFC Motors
Three Phase
Hardware • Memory module In addition to VSD
• IT-Grid compatible • Brake chopper
• Integrated EMC filters • DC bus sharing
• Zero clearance mounting • Safety torque off (optional)
• Form "C" relay • Dedicated PTC
I/O Basic -I/O Standard-I/O
Communication • Spring loaded control terminals (fixed) • Pluggable control terminal
Inverter Duty
• Biploar speed reference
Motors
• 24V keep alive
• Selectable PHP or NPN logic
• Application-I/O (optional)
• Additional I/Os
Fieldbus CANopen/Modbus (optional) CANopen, Modbus, Profibus,
Profinet, EtherNet-I/P
Diagnostics Hot-swappable options: keypad, USB module, WLAN module, Remote keypad
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
91
Tech Information Severe Duty Motors
Premium Efficient IEEE 841 Severe Duty Motors
WATTsaver® Plus Severe Duty Motors
Single Phase
ODP Motors
TEFC Motors
Single Phase
Applications:
Used in severe duty environments that you may find in foundries, pulp, paper mills,
waste management facilities, above ground mines, refineries or other applications
that demand corrosion protection for long motor life and dependability.
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
92
Severe Duty Motors
Tech Information
IEEE 841 Premium Efficient Motors
General Specifications:
Designed for harsh environments that you may find
in refineries, above-ground mines, foundries, paper and pulp mills,
cement plants or other severe duty applications.
Features:
Single Phase
ODP Motors
• Inpro® shaft seals seal on drive end of • IP56 enclosure protection
TENV and both ends of TEFC models • Tested to IEEE45 USCG Marine Duty,
• Inverter rated insulation system API RP14F for offshore platforms
• Re-greasable bearings • Division II CSA certification for
• Epoxy paint hazardous locations, Class I Groups A,
• Test data supplied with each motor B, C, D, temperature Code T2B
TEFC Motors
Single Phase
Three Phase - Totally Enclosed - Rigid Base
SYN App. F. L. “C”
Stock
ODP Motors
Three Phase
1 1/2 3600 143T 811542.00 C/A 1,353 145THTN9005 58 460 2.0 86.5 1.15 10.43 C, US, 12
1 1/2 1800 145T 811643.00 C/A 1,361 145TTTN16627 68 460 2.3 86.5 1.15 11.43 C, US, 12
1 1/2 1200 182T 811647.00 √ 1,864 182THTS9076 100 460 2.2 87.5 1.15 13.94 C, US, 12
2 3600 145T 811544.00 C/A 1,421 145THTN9001 68 460 2.5 85.5 1.15 11.43 C, US, 12
2 1800 145T 811644.00 C/A 1,401 145TTTN16626 77 460 3.0 86.5 1.15 11.43 C, US, 12
2 1200 184T 811648.00 C/A 2,301 184THTS9076 112 460 3.0 88.5 1.15 15.94 C, US, 12
3 3600 182T 811546.00 C/A 2,058 182THTS19005 105 460 3.8 87.5 1.15 12.71 C, US, 12
TEFC Motors
Three Phase
3 1800 182T 811547.00 √ 1,745 182THTS19041 100 460 4.0 90.2 1.15 12.71 C, US, 12
3 1200 213T 811649.00 √ 2,835 184THTS9076 176 460 4.4 89.5 1.15 19.63 C, US, 12
5 3600 184T 811548.00 √ 2,210 184THFS19010 142 460 5.9 89.5 1.15 16.19 C, US
5 1800 184T 811549.00 √ 2,036 184THFS19045 130 460 6.2 90.2 1.15 16.19 C, US
5 1200 215T 811650.00 √ 3,479 215THFS9076 225 460 6.9 89.5 1.15 22.63 C, US
7 1/2 3600 213T 811550.00 C/A 2,609 213THTS19008 200 460 8.9 91.7 1.15 17.18 C, US, 12
7 1/2 1800 213T 811551.00 √ 2,471 213THFS19044 200 460 9.6 91.7 1.15 19.72 C, US
Inverter Duty
7 1/2 1200 254T 811651.00 √ 4,177 254THFNA9076 326 460 9.9 91.0 1.15 23.65 C, US
Motors
10 3600 215T 811552.00 √ 3,050 215THFS19011 218 460 11.2 91.7 1.15 22.63 C, US
10 1800 215T 811553.00 √ 2,992 215THFS19051 225 460 12.5 91.7 1.15 19.73 C, US
10 1200 256T 811652.00 √ 5,100 256THFNA9076 405 460 13.1 91.0 1.15 25.40 C, US
15 3600 254T 811554.00 √ 3,782 254THFNA19014 345 460 17.5 91.7 1.15 23.52 C, US
15 1800 254T 811555.00 √ 3,594 254THFNA19052 350 460 18.8 92.4 1.15 23.52 C, US
15 1200 284T 811653.00 C/A 6,771 284THFNA9076 479 460 20.4 91.7 1.15 26.21 C, US
Severe Duty
20 3600 256T 811556.00 C/A 4,671 256THFNA19004 375 460 23.4 92.4 1.15 25.27 C, US
Motors
20 1800 256T 811557.00 √ 4,470 256THFNA19050 425 460 24.1 93.0 1.15 25.27 C, US
20 1200 286T 811654.00 √ 8,250 286THFNA9076 550 460 26.8 91.7 1.15 27.71 C, US
25 3600 284TS 811558.00 C/A 5,798 284TSHFNA19009 481 460 28.1 93.6 1.15 24.97 C, US
25 1800 284T 811559.00 √ 5,296 284THFNA19043 478 460 31.0 93.6 1.15 26.21 C, US
25 1200 324T 811655.00 √ 9,793 324THFS9076 700 460 32.5 93.0 1.15 28.87 C, US
Continued on next page
Explosion Proof
Green items are Premium Efficient Note listing on inside back flap
Motors
93
Inpro is believed to be the trademark or trade name of INPRO/
SEAL LLC and is not controlled by Regal Beloit Corporation.
Tech Information Severe Duty Motors
IEEE 841 Premium Efficient Motors
Stock
RPM NEMA Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 460 V Eff. Factor (Inches) Notes
30 3600 286TS 811560.00 C/A 7,120 286TSHFNA19002 500 460 34.0 93.6 1.15 26.46 C, US
Single Phase
ODP Motors
30 1800 286T 811561.00 √ 6,451 286THFNA19051 525 460 36.5 94.1 1.15 27.84 C, US
30 1200 326T 811656.00 √ 11,518 326THFS9076 725 460 38.5 93.0 1.15 30.37 C, US
40 3600 324TS 811562.00 √ 9,453 324TSHFS19007 656 460 47.0 93.6 1.15 27.37 C, US
40 1800 324T 811563.00 √ 8,833 324THFS19045 700 460 47.5 94.1 1.15 30.37 C, US
40 1200 364T 811657.00 √ 14,362 364THFS19087 950 460 50.0 94.1 1.15 31.51 C, US
50 3600 326TS 811564.00 √ 12,182 326TSHFS19005 725 460 56.5 93.0 1.15 28.87 C, US
50 1800 326T 811565.00 √ 10,575 326THFS19057 775 460 60.0 94.1 1.15 30.37 C, US
TEFC Motors
Single Phase
50 1200 365T 811658.00 √ 17,616 365THFS19086 942 460 61.5 94.5 1.15 31.51 C, US
60 3600 364TS 811566.00 C/A 14,651 364TSHFS19006 925 460 67.0 94.5 1.15 29.38 C, US
60 1800 364T 811567.00 C/A 13,944 364THFS19047 1,000 460 70.0 95.0 1.15 13.25 C, US
60 1200 404T 811659.00 √ 19,326 404THFS9086 1,156 460 72.0 94.5 1.15 35.63 C, US
75 3600 365TS 811568.00 √ 18,475 365TSHFS19005 1,002 460 84.0 94.5 1.15 30.38 C, US
75 1800 365T 811569.00 √ 17,913 365THFS19052 1,100 460 86.0 95.4 1.15 32.50 C, US
75 1200 405T 811660.00 √ 22,642 405THFS9086 1,280 460 89.5 94.5 1.15 37.14 C, US
ODP Motors
Three Phase
100 3600 405TS 811570.00 C/A 25,023 405TSHFS19006 1,295 460 108.0 94.5 1.15 34.13 C, US
100 1800 405T 811571.00 √ 21,847 405THFS19060 1,330 460 113.0 95.4 1.15 37.14 C, US
100 1200 444T 811661.00 √ 33,557 444THFN19081 2,100 460 124.0 95.0 1.15 43.35 C, US
125 3600 444TS 811586.00 √ 28,488 444TSHFN19003 1,682 460 142.0 95.0 1.15 39.64 C, US
125 1800 444T 811587.00 √ 26,524 444THFN19055 1,725 460 146.0 95.4 1.15 43.35 C, US
125 1200 445T 811662.00 C/A 38,186 445THFN9086 2,000 460 155.0 95.0 1.15 43.35 C, US
150 3600 445TS 811588.00 √ 34,219 445TSHFN19005 2,187 460 168.0 95.8 1.15 39.37 C, US
TEFC Motors
150 1800 445T 811589.00 √ 29,407 445THFN19072 2,070 460 172.0 95.8 1.15 43.35 C, US
Three Phase
150 1200 445T 811663.00 C/A 42,727 445THFN9087 2,500 460 181.0 95.8 1.15 43.35 C, US, ◊
200 3600 445TS 811590.00 √ 43,289 445TSHFN19006 2,300 460 224.0 95.4 1.15 39.60 C, US
200 1800 445T 811591.00 √ 35,766 445THFN19074 2,437 460 226.0 96.2 1.15 43.35 C, US
200 1200 447/9T 811664.00 C/A 52,303 449THFS19092 2,927 460 240.0 95.8 1.15 51.84 C, US, ◊
250 3600 447/9TS 811592.00 C/A 54,594 449TSHFS19008 2,864 460 270.0 96.5 1.15 47.94 C, US
250 1800 447/9T 811593.00 C/A 51,603 449THFS19344 2,834 460 285.0 96.5 1.15 51.85 C, US
300 1800 447/9T 811594.00 C/A 52,635 449THFS19345 3,039 460 339.0 96.5 1.15 51.84 C, US
Inverter Duty
350 3600 447/9TS 811595.00 C/A 81,150 449TSHFS19009 2,888 460 380.0 95.8 1.15 47.94 C, US
Motors
350 1800 447/9T 811596.00 C/A 66,909 449THFS19346 3,082 460 395.0 96.2 1.15 51.84 C, US, ◊
94
Severe Duty Motors
Tech Information
Premium Efficient Severe Duty - WATTSaver® Plus
General Specifications:
Designed specifically to meet severe duty environments that you
may find in applications such as chemical plants, foundries, pulp and
paper mills, waste management facilities and above ground mines.
Single Phase
ODP Motors
Features:
• Full cast iron construction
• Inverter rated insulation system
• Epoxy painted
TEFC Motors
Single Phase
• Shaft seals both ends
• Internal corrosion protection
• IP55 enclosure protection
• Division II CSA certification for hazardous locations, Class I Groups A, B, C, D, temperature Code T2B
ODP Motors
Three Phase
Three Phase - TEFC - Rigid Base
SYN App. F. L. “C”
Stock
TEFC Motors
Three Phase
5 1200 215T 171635.60 √ 2,233 C215T11FW1 186 208-230/460 14.4 89.5 1.25 19.75 C, CN, T
7 1⁄2 3600 213T 171616.60 √ 2,035 C213T34FW1 155 208-230/460 15.0 91.0 1.25 18.30 C, CN, T
7 1⁄2 1800 213T 171622.60 √ 1,963 C213T17FW1 165 208-230/460 18.6 91.7 1.15 18.30 C, CN, T
7 1⁄2 1200 254T 171636.60 √ 2,904 C254T11FW1 263 208-230/460 22.2 91.7 1.25 23.90 C, CN, T
10 3600 215T 171617.60 √ 2,413 C215T34FW1 190 208-230/460 23.0 91.7 1.25 19.75 C, CN, T
10 1800 215T 171631.60 √ 2,341 C215T17FB1 187 208-230/460 25.0 91.7 1.25 19.75 C, CN, T
10 1200 256T 171637.60 √ 4,153 C256T11FB1 312 208-230/460 29.0 91.7 1.25 25.60 C, CN, T
Inverter Duty
15 3600 254T 171620.60 √ 3,281 C254T34FW1 294 208-230/460 34.5 92.4 1.25 23.90 C, CN, T
Motors
15 1800 254T 171632.60 √ 3,173 C254T17W1 294 208-230/460 36.0 92.4 1.25 23.90 C, CN, T
15 1200 284T 171638.60 √ 5,621 C284T11FW1 346 208-230/460 40.5 92.4 1.25 26.30 C, CN, T
20 3600 256T 171621.60 √ 4,009 C256T34FW1 330 208-230/460 46.0 92.4 1.25 25.60 C, CN, T
20 1800 256T 171633.60 √ 3,961 C256T17FW1 335 208-230/460 49.0 93.0 1.15 25.60 C, CN, T
20 1200 286T 171639.60 √ 7,024 C286T11FW1 405 208-230/460 56.5 92.4 1.25 27.68 C, CN, T
25 3600 284TS 171778.60 √ 4,893 C284T34FB11 403 208-230/460 54.0 93.0 1.15 24.88 C, CN, T
Severe Duty
25 1800 284T 171779.60 √ 4,622 C284T17FB14 405 208-230/460 59.0 93.6 1.15 26.57 C, CN, T
Motors
25 1200 324T 171780.60 √ 7,723 C324T11FB16 566 208-230/460 66.0 93.6 1.15 29.53 C, CN, T
30 3600 286TS 171781.60 √ 5,776 C286T34FB10 435 208-230/460 68.0 94.1 1.15 26.65 C, CN, T
30 1800 286T 171782.60 √ 5,385 C286T17FB12 455 208-230/460 70.0 94.1 1.15 27.83 C, CN, T
30 1200 326T 171783.60 √ 8,669 C326T11FB12 636 230/460 77.0 93.6 1.15 31.02 C, CN, T
40 3600 324TS 171784.60 √ 7,205 C324T34FB9 522 208-230/460 90.0 92.4 1.15 28.03 C, CN, T
40 1800 324T 171785.60 √ 7,154 C324T17FB12 553 208-230/460 92.0 94.1 1.15 29.53 C, CN, T
Explosion Proof
40 1200 364T 171786.60 √ 11,883 C364T11FB14 554 208-230/460 101.0 94.1 1.15 32.32 C, CN, T
Motors
95
Tech Information Severe Duty Motors
Premium Efficient Severe Duty - WATTSaver® Plus
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
50 3600 326TS 171787.60 √ 8,749 C326T34FB10 554 208-230/460 112 94.1 1.25 31.02 C, CN, T
50 1800 326T 171788.60 √ 8,640 C326T17FB13 587 208-230/460 117 94.5 1.15 31.02 C, CN, T
50 1200 365T 171789.60 √ 14,263 C365T11FB14 785 208-230/460 126 94.1 1.15 33.31 C, CN, T
60 3600 364TS 171790.60 √ 12,980 C364T34FW1 740 208-230/460 134 94.1 1.15 30.20 C, CN, T
60 1800 364T 171791.60 √ 12,288 C364T17FB12 800 208-230/460 139 95.4 1.15 32.32 C, CN, T
60 1200 404T 171792.60 √ 16,822 C404T11FB11 1015 208-230/460 142 94.5 1.25 36.42 C, CN, T
TEFC Motors
Single Phase
75 3600 365TS 171793.60 √ 15,900 C365T34FB9 781 208-230/460 167 94.5 1.15 31.18 C, CN, T
75 1800 365T 171794.60 √ 15,334 C365T17FB11 941 208-230/460 171 95.8 1.15 33.31 C, CN, T
75 1200 405T 171795.60 √ 17,730 C405T11FB12 1115 208-230/460 176 95.0 1.15 38.91 C, CN, T
100 3600 405TS 171796.60 √ 19,577 C405T34FB11 955 208-230/460 214 95.0 1.15 34.92 C, CN, T
100 1800 405T 171797.60 √ 19,070 C405T17FB10 1253 208-230/460 226 95.4 1.15 37.91 C, CN, T
100 1200 444T 171798.60 √ 25,241 C444T11FB11 1437 460 121* 95.0 1.15 42.87 C, CN, T
125 3600 444TS 171799.60 √ 23,376 C444T34FB12 1446 460 136* 95.4 1.15 39.10 C, CN, T
125 1800 444T 171800.60 √ 25,319 C444T17FB12 1485 460 138* 95.4 1.15 42.87 C, CN, T
ODP Motors
Three Phase
125 1200 445T 171801.60 √ 28,520 C445T11FB9 1596 460 155* 95.4 1.15 44.88 C, CN, T
150 3600 445TS 171802.60 √ 28,851 C445T34FB7 1437 460 163* 95.0 1.15 41.11 C, CN, T
150 1800 445T 171803.60 √ 28,967 C445T17FB14 1627 460 164* 95.8 1.15 44.88 C, CN, T
150 1200 447T 171804.60 √ 32,160 C447T11FB7 2118 460 186* 96.2 1.15 48.05 C, CN, T
200 3600 447TS 171805.60 √ 33,228 C447T34FB7 2048 460 216* 95.4 1.15 44.33 C, CN, T
200 1800 447T 171806.60 √ 33,176 C447T17FB11 2207 460 216* 96.2 1.15 48.05 C, CN, T
200 1200 449T 171807.60 √ 42,124 C449T11FB7 2645 460 241* 96.2 1.15 52.80 C, CN, T
TEFC Motors
Three Phase
96
Severe Duty Motors
Tech Information
Premium Efficient Severe Duty - WATTSaver® Plus
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
3 1800 182TC 171815.60 √ 1,517 182T17WK1 125 208-230/460 7.8 90.2 1.15 15.89 C, CN, T
3 1200 213TC 171816.60 √ 2,140 213T11WK1 142 208-230/460 9.4 89.5 1.15 18.19 C, CN, T
5 1800 184TC 171817.60 √ 1,571 184T17WK1 131 208-230/460 12.8 89.5 1.15 16.80 C, CN, T
5 1200 215TC 171818.60 √ 2,394 215T11WK1 180 230/460 14.4 89.5 1.15 19.61 C, CN, T
7 1⁄2 1800 213TC 171819.60 √ 2,105 213T17WK1 155 230/460 18.6 91.7 1.15 18.19 C, CN, T
7 1/2 1200 254TC 171820.60 √ 3,113 254T11WK1 249 208-230/460 22.2 91.7 1.15 23.19 C, CN, T
TEFC Motors
Single Phase
10 1800 215TC 171821.60 √ 2,509 215T17WK1 177 208-230/460 25.0 91.7 1.15 19.61 C, CN, T
10 1200 256TC 171822.60 √ 4,453 256T11WK1 300 208-230/460 29.0 91.7 1.15 24.92 C, CN, T
15 1800 254TC 171823.60 √ 3,402 254T17WK1 284 230/460 36.0 92.4 1.15 23.19 C, CN, T
15 1200 284TC 171824.60 √ 6,027 284T11WK1 333 208-230/460 40.5 92.4 1.15 26.26 C, CN, T
20 1800 256TC 171825.60 √ 4,247 256T17WK1 325 230/460 49.0 93.0 1.15 24.92 C, CN, T
20 1200 286TC 171826.60 √ 7,530 286T11WK1 423 208-230/460 54.0 92.4 1.15 27.83 C, CN, T
25 1800 284TC 171827.60 √ 4,954 284T17WK1 388 230/460 58.5 93.6 1.15 26.26 C, CN, T
25 1200 324TC 171828.60 √ 8,279 324T11WK1 578 208-230/460 66.0 93.6 1.15 29.53 C, CN, T
ODP Motors
Three Phase
30 1800 286TC 171829.60 √ 5,772 286T17WK1 436 230/460 70.0 94.1 1.15 27.83 C, CN, T
30 1200 326TC 171830.60 √ 9,293 326T11WK1 646 208-230/460 77.0 93.6 1.15 31.02 C, CN, T
40 1800 324TC 171831.60 √ 7,668 324T17WK1 532 230/460 92.0 94.1 1.15 29.53 C, CN, T
40 1200 364TC 171832.60 √ 12,739 364T11WK1 816 208-230/460 101 94.1 1.15 32.64 C, CN, T
50 1800 326TC 171833.60 √ 9,262 326T17WK1 592 230/460 117 94.5 1.15 31.02 C, CN, T
50 1200 365TC 171834.60 √ 15,291 365T11WK1 712 208-230/460 126 94.1 1.15 33.62 C, CN, T
60 1800 364TC 171835.60 √ 13,173 364T17WK1 670 230/460 139 95.4 1.15 32.64 C, CN, T
TEFC Motors
Three Phase
60 1200 404TC 171836.60 √ 18,033 404T11WK1 1,062 208-230/460 142 94.5 1.15 36.42 C, CN, T
75 1800 365TC 171837.60 √ 16,437 365T17WK1 739 230/460 171 95.8 1.15 33.62 C, CN, T
75 1200 405TC 171838.60 √ 19,006 405T11WK1 1,066 208-230/460 176 95.0 1.15 37.91 C, CN, T
100 1800 405TC 171839.60 √ 20,443 405T17WK1 1,076 230/460 226 95.4 1.15 37.91 C, CN, T
100 1200 444TC 171840.60 √ 27,058 444T11WK1 1,492 460 121* 95.0 1.15 42.87 C, CN, T
Note listing on inside back flap
Shaded model numbers are cast iron frame Specifications are subject to change without notice
Inverter Duty
Green items are Premium Efficient
Motors
*F.L. Amps @ 460 volts
T: N/C T-stats
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
97
Tech Information Severe Duty Motors
Lincoln Severe Duty
General Specifications:
Cast iron designed motors that are designed
for use in pulp and paper mills, foundries, chemical plants
or any severe duty application.
Single Phase
ODP Motors
Features:
• Meets Ford® EM1-1996 Spec.
• 460 volt - 3 lead designs
• Full cast iron construction
TEFC Motors
Single Phase
• Class F insulation
• Shielded ball bearing construction
1 1800 143T LM32856 C/A 1,061 CCS4B1T61 59 208-230/460 3.3 85.5 1.25 14.17 C, US
1 1200 145T LM32857 C/A 1,436 CCS6B1T61 57 208-230/460 3.6 82.5 1.25 14.29 C, US
2 1800 145T LM32862 √ 1,182 CCS4B2T61 64 208-230/460 6.0 86.5 1.25 14.29 C, US
3 1800 182T LM16644 C/A 1,437 CCS4B3T61T5 104 208-230/460 8.0 90.2 1.25 15.19 C, US
5 1800 184T LM16650 C/A 1,570 CCS4B5T61T5 138 208-230/460 12.4 90.2 1.25 16.20 C, US
7 1/2 1800 213T LM32869 C/A 2,049 CCS4B7.5T61 223 208-230/460 19.4 91.7 1.25 19.70 C, US
10 1800 215T LM16919 C/A 2,588 CCS4B10T61 213 208-230/460 25.0 91.7 1.25 19.63 C, US
TEFC Motors
Three Phase
15 1800 254T LM32873 C/A 3,243 CCS4B15T61 322 208-230/460 37.5 92.4 1.25 23.52 C, US
20 1800 256T LM32876 C/A 4,180 CCS4B20T61 368 208-230/460 48.0 93.0 1.15 25.30 C, US
25 1800 284T LM32879 C/A 4,920 CCS4B25T61Y 495 208-230/460 62.0 93.6 1.25 26.30 C, US
30 1800 286T LM32882 C/A 5,813 CCS4B30T61Y 519 208-230/460 73.0 94.1 1.15 27.84 C, US
40 1800 324T LM32885 C/A 7,675 CCS4B40T61Y 835 208-230/460 — 94.1 1.15 — C, US
50 1800 326T LM32887 C/A 8,938 CCS4B50T61Y 692 208-230/460 120 94.5 1.15 30.40 C, US
60 1800 364T LM32890 C/A 14,451 CCS4B60T61Y 980 208-230/460 — 95.0 1.15 — C, US
Inverter Duty
75 1800 365T LM32893 C/A 16,395 CCS4B75T61Y 1018 208-230/460 172 95.4 1.15 32.50 C, US
Motors
100 1800 405T LM32896 C/A 19,829 CCS4B100T61Y 1338 208-230/460 226 95.4 1.15 37.10 C, US
125 1800 444T LM32899 C/A 25,251 CCS4B125T64Y 1874 460 — 95.4 1.15 — C, US
150 1800 445T LM32902 C/A 32,782 CCS4B150T64Y 2070 460 — 95.8 1.15 — C, US
200 1800 449T LM32905 C/A 37,297 CCS4B200T64Y 2305 460 224* 96.2 1.25 51.84 C, US
250 1800 449T LM34101 C/A 42,185 CCS4B250T64Y 2572 460 285* 96.5 1.15 51.84 C, US
300 1800 449T LM14642 C/A 42,775 CCS4B300T64Y 2572 460 341* 96.2 1.15 51.84 C, US
300 1800 449T LM22909 C/A 42,775 CCS4B300T64 2572 460 341* 96.2 1.15 51.84 C, US
Severe Duty
Motors
98
Ford is believed to be the trademark or trade name of Ford Mo-
tor Company and is not controlled by Regal Beloit Corporation.
Severe Duty Motors
Tech Information
Lincoln Motors ODP-Encapsulated Multiguard® Motors
Product Line
General Specifications: Discontinued
Multiguard motors utilize an ODP enclosure utilizing an impregnated and Once Stock is
encapsulated process to seal the winding endcoils from contamination. Depleted
This process protects the windings from moisture, vibration, and some
Single Phase
ODP Motors
chemical actions.
Features:
• Encapsulated windings
• Durable steel frame construction
• NEMA® design B performance
TEFC Motors
Single Phase
• 284T - 405T: Y-delta start on either voltage
• 444T - 445T: Y-delta start and part-winding start
• Made in the U.S.A.
• NOT FOR USE WITH VFDs
• Contact sales office for 50HZ ratings as the frame sizes will change from 60HZ
ODP Motors
Three Phase
Three Phase - Drip-Proof - Rigid Base
SYN App. F. L. “C”
Stock
TEFC Motors
Three Phase
40 1800 324TS LM34366 D MD4B40TS61 420 208-230/460 99.0 90.2 1.00 24.50 S, US
50 1800 326T LM34368 D MD4B50T61 — 208-230/460 — 94.1 1.00 — S, US
60 1800 364T LM34370 D MD4B60T61 476 208-230/460 124.0 89.5 1.00 27.30 S, US
75 1800 365T LM34371 D MD4B75T61 488 208-230/460 132.0 94.5 1.00 27.32 S, US
75 1200 405T LM34373 D MD6B75T61 660 208-230/460 141 94.5 1.00 28.40 S, US
100 1800 404T LM34375 D MD4B100T61 644 208-230/460 177 95.0 1.00 29.40 S, US
125 1800 405T LM34377 D MD4B125T61 — 208-230/460 — 91.7 1.00 — S, US
125 1800 405TS LM34378 D MD4B125TS61 887 208-230/460 246 95.4 1.00 31.81 S, US
Inverter Duty
150 1800 444T LM34380 D MD4B150T64PY 987 208-230/460 298 95.4 1.00 33.31 S, US
Motors
200 1800 445T LM34381 D MD4B200T64PY — 208-230/460 — 95.4 1.00 — S, US
250 1800 447T LM34382 D MD4B250T64PY — 460 — 95.8 1.00 — S, US
Continued on next page
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
*F.L. Amps @ 460 volts
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Custom motors include two, three and four-speed motors and speed
ranges of 900, 720, 600, 450 and 300 RPMs. We also specialize in
non-standard shaft designs. For quotations, availability and application
ODP Motors
Three Phase
Mod-Squad Program
Quick-turnaround stock motor modifications
TEFC Motors
Three Phase
Single Phase
service support needs.
ODP Motors
TEFC Motors
Single Phase
ODP Motors
Three Phase
TEFC Motors
TRUST REGAL® DESIGN AND MANUFACTURING
Three Phase
EXPERIENCE TO DELIVER
THE PERFECT SOLUTION
Inverter Duty
FOR YOUR APPLICATION.
Motors
MORE THAN 100 YEARS OF BROAD STOCK PRODUCT MODULAR MANUFACTURING ACCESSORIES ENABLE
LARGE MOTOR EXPERTISE. PORTFOLIO ENSURES RAPID DELIVERS APPLICATION CUSTOMIZED SOLUTIONS.
For over a century, dedicated RESPONSE. SPECIFIC PRODUCTS FASTER. An extensive range
Severe Duty
Regal® specialists have Regal carries a broad range Our modular manufacturing of specialized motor
Motors
provided large motor of stock products across design approach enables the accessories helps deliver
solutions for countless an extensive network of configuration of products in flexible, application-specific
industries and applications. distribution centers to help compressed time frames. solutions. From overload
This expertise ensures you deliver the right product at Get the product that meets protection, voltage surge
receive the best product— the right time.Trust Regal to your specifications without protection to vibration
stock or custom—for your deliver solutions that help compromising features or protection, your trusted
unique installation.Tap our Regal representative will
Explosion Proof
101
Tech Information Explosion Proof Motors
Applications:
These motors must be applied in accordance with the National Electrical Code, Article #500.
Consult NFPA Publication 497M for a complete listing of explosive agents that are typically found
TEFC Motors
Three Phase
Tech Information
Three Phase and Single Phase
Single Phase
ODP Motors
Application Notes:
These motors must be applied in accordance with the National Electrical Code, Article #500.
A partial listing of explosive agents is noted below. Consult NFPA Publication 497M for a
complete listing. Please note subheads above each column for qualifications of LEESON® motors.
Features:
TEFC Motors
Single Phase
• Meets UL and CSA safety requirements
• Automatic overload or thermostat protected
• Explosion rated conduit box included
• Internal mounted capacitors
• Double shielded ball bearings
• Meets temperature code T3B
ODP Motors
Three Phase
Rating Information:
According to UL Division 1 areas are environments where a hazard is present continuously or
would be subject to fire or explosion if the hazard was present as a result of an accident or
uncommon occurrence.
Division 2 areas are environments where the threat of fire or explosion is not normally present
TEFC Motors
Three Phase
and not likely to result in the event of an abnormal occurrence.
Application Notes:
Class I
Group A: Acetylene
Group B: Butadiene, ethylene oxide, hydrogen, propylene oxide, manufactured gases containing
Inverter Duty
Motors
more than 30% hydrogen by volume.
Group C: Acetaldehyde, cyclopropane, diethyl ether, ethylene.
Group D: Acetone, acrylonitrile, ammonia, benzene, butane, ethanol, ethylene dichloride,
gasoline, hexane, isoprene, methane (natural gas), methanol, naphtha, propane,
propylene, styrene, toluene, vinyl acetate, vinyl chloride, xylene.
Class II
Severe Duty
Motors
Group E: Aluminum, magnesium and other metal dusts with similar characteristics.
Group F: Carbon black, coke or coal dust.
Group G: Flour, starch or grain dust.
Note: No LEESON motors are listed for Class I, Group A or B for Division 1.
Explosion Proof
Motors
Please contact your local LEESON motors sales office for ATEX certified motors, Zone 2 and 22.
Duty Motors
Automotive
103
Tech Information Explosion-Proof Motors
Single Phase - Rigid Base
Division I, Class I, Groups C&D - Class II, Groups F&G - W/Conduit Box
SYN App. Over- F. L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/3 1800 56 111074.00 √ 948 A6C17EB20 35 115/230 Auto. 2.9 1.00 12.97 S, US, 12
Single Phase
ODP Motors
1/2 1800 56H 111084.00 √ 1,045 A6C17XB22 41 115/230 Auto. 4.4 1.00 13.58 S, US, 6, 13
3/4 1800 56H 110934.00 √ 1,234 A6C17XB21 46 115/230 Auto. 5.5 1.00 14.08 S, US, 6, 13
1 1800 56H 110961.00 √ 1,401 A6C17XB20 47 115/230 Auto. 6.7 1.00 14.08 S, US, 6, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
Division I, Class I, Groups C&D - Class II, Groups F&G - W/Conduit Box
SYN App. Over- F. L. “C”
Stock
1/2 3600 56J 116188.00 √ 951 A6C34XC31 35 115/230 Auto. 3.8 1.00 13.95 S, US, 13
1/2 1800 56C 111085.00 √ 1,160 A6C17XC22 45 115/230 Auto. 4.4 1.00 13.94 S, US, 13
3/4 3600 56C 111097.00 √ 1,081 A6C34XC21 40 115/230 Auto. 5.0 1.00 13.94 S, US, 13
3/4 3600 56J 116186.00 √ 1,072 A6C34XC32 40 115/230 Auto. 5.0 1.00 14.45 S, US, 13
3/4 1800 56C 111086.00 √ 1,287 A6C17XC21 50 115/230 Auto. 5.5 1.00 14.44 S, US, 13
1 3600 56C 111096.00 √ 1,160 A6C34XC20 49 115/230 Auto. 6.2 1.00 14.44 S, US, 13
1 3600 56J 116185.00 √ 1,149 A6C34XC33 49 115/230 Auto. 6.0 1.00 14.95 S, US, 13
TEFC Motors
Three Phase
1 1800 56C 110852.00 √ 1,468 A6C17XC20 53 115/230 Auto. 6.7 1.00 14.44 S, US, 13
1 1⁄2 3600 56C 114424.00 √ 1,437 A6C34XC26 44 115/230 Auto. 8.5 1.00 14.44 S, US, 13
1 1⁄2 3600 56J 116183.00 √ 1,474 A6C34XC34 54 115/230 Auto. 8.5 1.00 14.95 S, US, 13
2 3600 56C 114425.00 √ 1,576 A6C34XC27 54 115/230 Auto. 10.5 1.00 14.94 S, US, 13
2 3600 56J 116181.00 √ 1,602 A6C34XC35 54 115/230 Auto. 10.5 1.00 15.45 S, US, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
Inverter Duty
Motors
1/3 1800 56C 116606.00 √ 1,078 A6C17XK33 42 115/230 Auto. 3.3 1.00 13.44 S, US, 13
1/3 1200 56C 116607.00 √ 1,234 A6C17XK31 45 115/230 Auto. 3.9 1.00 13.94 S, US, 13
1/2 3600 56C 116608.00 √ 1,040 A6C34XK6 36 115/230 Auto. 3.8 1.00 13.44 S, US, 13
1/2 1800 56C 116609.00 √ 1,195 A6C17XK32 46 115/230 Auto. 4.4 1.00 13.94 S, US, 13
1/2 1200 56C 116610.00 √ 1,338 A6C17XK34 56 115/230 Auto. 4.7 1.00 14.94 S, US, 13
3/4 3600 56C 116611.00 √ 1,113 A6C34XK5 41 115/230 Auto. 5.3 1.00 13.94 S, US, 13
Explosion Proof
3/4 1800 56C 116612.00 √ 1,322 A6C17XK30 51 115/230 Auto. 5.5 1.00 14.44 S, US, 13
1 3600 56C 116613.00 √ 1,195 A6C34XK4 50 115/230 Auto. 6.3 1.00 14.44 S, US, 13
Motors
1 1800 56C 116614.00 √ 1,455 A6C17XK29 54 115/230 Auto. 6.7 1.00 14.44 S, US, 13
1 1⁄2 3600 56C 116615.00 √ 1,693 A6C34XK3 45 115/230 Auto. 8.5 1.00 14.44 S, US, 13
2 3600 56C 116616.00 √ 2,075 A6C34XK2 58 115/230 Auto. 10.5 1.00 14.94 S, US, 13
Note 13 - TEFC Note listing on inside back flap
Specifications are subject to change without notice
Duty Motors
Automotive
104
Explosion-Proof Motors
Tech Information
Three Phase - Rigid Base
Division I, Class I, Groups C&D - Class II, Groups F&G - W/Conduit Box
SYN App. Over- F. L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Eff Factor (Inches) Notes
1/3 1800 56 111932.00 √ 969 A6T17EB22 33 208-230/460 Auto 1.3 76.0 1.00 11.97 S, US, 12
Single Phase
ODP Motors
1/3 1800 56 117856.00 √ 949 C6T17EB38 33 208-230/460 T-Stats 1.3 76.0 1.00 11.97 S, US, 12
1/3 1200 56 111940.00 √ 1,389 A6T11EB21 39 208-230/460 Auto 1.5 70.0 1.00 13.97 S, US, 12
1/2 3600 56 111934.00 C/A 1,106 A6T34EB22 39 208-230/460 Auto 1.6 82.5 1.00 12.47 S, US, 12
1/2 1800 56 111929.00 √ 1,007 A6T17EB21 32 208-230/460 Auto 1.7 75.0 1.00 12.47 S, US, 12
1/2 1800 56 117857.00 √ 1,072 C6T17EB39 32 208-230/460 T-Stats 1.7 75.0 1.00 12.47 S, US, 12
1/2 1200 56 111938.00 √ 1,471 A6T11XB22 44 208-230/460 Auto 2.0 71.0 1.00 13.47 S, US, 6
3/4 3600 56 111937.00 √ 1,157 A6T34XB21 37 208-230/460 Auto 3.2 75.5 1.00 13.44 S, US, 13
TEFC Motors
Single Phase
3/4 1800 56 111923.00 √ 1,167 A6T17XB21 38 208-230/460 Auto 3.0 75.0 1.00 13.94 S, US, 13
3/4 1800 56 117858.00 √ 1,148 C6T17XB35 38 208-230/460 T-Stats 3.0 75.0 1.00 13.94 S, US, 13
3/4 1200 56 119736.00 √ 1,672 C6T11XB49 42 230/460 T-Stats 3.6 74.0 1.00 13.94 S, US
1 3600 56 119425.00 √ 1,485 A6T34XB23 38 230/460 Auto 3.0 80.0 1.00 13.94 S, US, 13
1 1800 56H 119421.00 √ 1,521 A6T17XB32 49 230/460 Auto 3.3 85.5 1.00 15.58 S, US, 6, 13
1 1800 56H 119426.00 √ 1,521 C6T17XB33 50 208-230/460 T-Stats 3.3 85.5 1.00 15.58 S, US, 6, 13
1 1200 56H 119737.00 C/A 1,616 C6T11XB50 52 230/460 T-Stats 3.8 82.5 1.00 15.94 S, US
ODP Motors
1 1/2 3600 143T 121914.00 √ 1,473 A143T34XB25 49 230/460 Auto 4.0 84.0 1.00 15.00 S, US, 13
Three Phase
1 1/2 1800 56H 119433.00 √ 1,531 C6T17XB34 63 230/460 T-Stats 4.6 86.5 1.15 15.58 S, US, 13
1 1/2 1800 145T 121915.00 √ 1,509 A145T17XB28 59 230/460 Auto 4.8 86.5 1.00 15.00 S, US, 13
1 1/2 1800 145T 122024.00 √ 1,488 C145T17XB31 59 230/460 T-Stats 4.8 86.5 1.00 16.00 S, US, 13
1 1/2 1200 182T 825404.00 √ 1,722 182TTGN6576 147 230/460 T-Stats 4.4 87.5 1.00 15.87 C, US
2 3600 145T 121916.00 √ 1,399 A145T34XB25 55 230/460 Auto 4.8 85.5 1.00 16.50 S, US, 13
2 1800 145T 121917.00 √ 1,675 C145T17XB27 60 230/460 Auto 5.8 86.5 1.00 16.50 S, US, 13
2 1800 145T 122025.00 √ 1,654 C145T17XB32 60 230/460 T-Stats 5.8 86.5 1.00 16.50 S, US, 13
TEFC Motors
Three Phase
2 1200 184T 825405.00 √ 1,948 184TTGN6576 154 230/460 T-Stats 6.0 88.5 1.00 17.87 C, US
3 3600 145T 121918.00 √ 1,653 U145T34XB26 56 230/460 T-Stats 4.8 86.5 1.00 16.00 S, US, 13
3 1800 182T 825085.00 √ 2,021 182TTGN16026 107 230/460 T-Stats 7.8 89.5 1.15 15.87 C, US
3 1200 213T 825406.00 √ 2,495 213TTGN6576 244 230/460 T-Stats 8.8 89.5 1.00 19.63 C, US
5 3600 184T 825086.00 √ 2,130 184TTGN16504 117 230/460 T-Stats 12.0 88.5 1.15 17.87 C, US
5 1800 184T 825087.00 √ 2,094 184TTGN16032 128 230/460 T-Stats 12.8 89.5 1.15 17.87 C, US
5 1200 215T 825407.00 √ 3,197 215TTGN6576 206 230/460 T-Stats 13.8 89.5 1.00 22.63 C, US
Inverter Duty
7 1/2 3600 213T 825088.00 √ 3,267 213TTGN16527 183 230/460 T-Stats 18.0 89.5 1.15 19.63 C, US
Motors
7 1/2 1800 213T 825089.00 √ 3,230 213TTGN16527 228 230/460 T-Stats 18.6 91.7 1.15 19.63 C, US
7.5 1200 254T 825408.00 √ 3,828 254TTGN16584 345 230/460 T-Stats 19.8 91.0 1.00 23.52 C, US
10 3600 215T 825090.00 √ 3,428 215TTGN16504 200 230/460 T-Stats 23.6 90.2 1.15 22.63 C, US
10 1800 215T 825091.00 √ 3,413 215TTGN16526 273 230/460 T-Stats 25.0 91.7 1.15 22.63 C, US
10 1200 256T 825409.00 √ 4,618 256TTGN16583 360 230/460 T-Stats 26.2 91.0 1.00 25.27 C, US
15 3600 254T 825092.00 √ 4,623 254TTGN16506 333 230/460 T-Stats 34.6 91.0 1.15 23.52 C, US
Severe Duty
15 1800 254T 825093.00 √ 4,603 254TTGN16539 383 230/460 T-Stats 36.0 92.4 1.15 23.52 C, US
Motors
15 1200 284T 825410.00 √ 6,413 284TTGN16582 536 230/460 T-Stats 41.0 91.7 1.00 26.34 C, US
20 3600 256T 825094.00 √ 4,844 256TTGS16514 383 230/460 T-Stats 46.8 91.0 1.15 25.27 C, US
20 1800 256T 825095.00 √ 4,807 256TTGN16539 285 230/460 T-Stats 48.2 93.0 1.15 25.27 C, US
20 1200 286T 825411.00 C/A 7,479 286TTGN16581 593 230/460 T-Stats 53.6 91.7 1.00 27.84 C, US
Shaded model numbers are cast iron frame Continued on next page
Explosion Proof
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Motors
105
Tech Information Explosion-Proof Motors
Three Phase - Rigid Base
Division I, Class I, Groups C&D - Class II, Groups F&G - W/Conduit Box
SYN App. Over- F. L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Eff Factor (Inches) Notes
25 3600 284TS 825096.00 √ 6,250 284TSGN16505 413 230/460 T-Stats 56.2 91.7 1.15 24.97 C, US
Single Phase
ODP Motors
25 1800 284T 825097.00 √ 5,614 284TTGN16538 374 230/460 T-Stats 62.0 93.6 1.15 26.34 C, US
25 1200 324T 825412.00 √ 11,007 324TTGS16584 681 230/460 T-Stats 65.0 93.0 1.00 28.87 C, US
30 3600 286TS 825098.00 √ 6,376 286TSTN16504 464 230/460 T-Stats 67.6 91.7 1.15 26.47 C, US
30 1800 286T 825099.00 √ 6,325 286TTGN16033 464 230/460 T-Stats 73.0 93.6 1.15 27.84 C, US
30 1200 326T 825413.00 √ 11,968 326TTGS16581 900 230/460 T-Stats 77.0 93.0 1.00 30.37 C, US
40 3600 324TS 825100.00 √ 8,819 324TSTGS16002 515 230/460 T-Stats 94.0 92.4 1.15 28.87 C, US
40 1800 324T 825101.00 √ 8,496 324TTGS16037 535 230/460 T-Stats 95.0 94.1 1.15 30.37 C, US
TEFC Motors
Single Phase
40 1200 364T 825414.00 √ 14,391 364TTGS16581 1151 230/460 T-Stats 100 93.6 1.00 31.74 C, US
50 3600 326TS 825102.00 √ 11,095 326TSTGS16503 585 230/460 T-Stats 116 93.0 1.15 30.37 C, US
50 1800 326T 825103.00 √ 11,023 326TTGS16540 585 230/460 T-Stats 120 94.5 1.00 30.37 C, US
50 1200 365T 825415.00 √ 15,570 365TTGS16587 1099 230/460 T-Stats 123 94.5 1.00 32.74 C, US
60 3600 364TS 825104.00 C/A 15,851 364TSTGS16504 890 230/460 T-Stats 134 93.6 1.15 29.38 C, US
60 1800 364T 825105.00 √ 15,179 364TTGS16035 992 230/460 T-Stats 138 95.0 1.15 31.52 C, US
60 1200 404T 825416.00 √ 19,443 404TTGS16581 1295 230/460 T-Stats 144 94.5 1.00 35.62 C, US
ODP Motors
75 3600 365TS 825106.00 √ 18,318 365TSTGS16507 1025 230/460 T-Stats 168 93.6 1.15 30.38 C, US
Three Phase
75 1800 365T 825107.00 √ 18,082 365TTGS16541 1053 230/460 T-Stats 172 95.4 1.15 32.52 C, US
75 1200 405T 825417.00 √ 22,640 405TTGS16585 1388 230/460 T-Stats 180 94.5 1.00 37.35 C, US
100 3600 405TS 825108.00 C/A 24,780 405TSTGS16002 1168 230/460 T-Stats 216 94.1 1.15 34.12 C, US
100 1800 405T 825109.00 C/A 22,032 405TTGS16034 1322 230/460 T-Stats 226 95.4 1.15 37.12 C, US
100 1200 444T 825418.00 √ 32,351 444TTGN16585 1813 230/460 T-Stats 248 95.0 1.00 41.35 C, US
125 3600 444TS 825110.00 C/A 34,207 444TSGN16503 1768 230/460 T-Stats 136 95.0 1.15 37.60 C, US
125 1800 444T 825111.00 C/A 28,742 444TTGN16032 1822 460 T-Stats 141* 95.4 1.15 41.35 C, US
TEFC Motors
Three Phase
125 1200 445T 825419.00 √ 37,192 445TTGN16596 2200 460 T-Stats 155* 95.0 1.00 43.35 C, US, ◊
150 3600 445TS 825112.00 C/A 40,035 445TSTGN16002 2072 460 T-Stats 165* 95.0 1.15 39.60 C, US
150 1800 445T 825113.00 C/A 33,497 445TTGN16035 2072 460 T-Stats 172* 95.8 1.15 43.35 C, US
150 1200 445T 825420.00 √ 39,977 445TTGN16595 2384 460 T-Stats 181* 95.8 1.00 43.35 C, US, ◊
200 3600 445TS 825114.00 C/A 48,856 445TSTGN16003 2332 460 T-Stats 222* 95.4 1.15 39.60 C, US
200 1800 445T 825115.00 C/A 39,592 445TTGN16036 2275 460 T-Stats 226* 96.2 1.15 43.35 C, US
200 1200 449T 825421.00 √ 56,843 449TTGS16598 2878 460 T-Stats 240* 95.8 1.00 51.85 C, US
Inverter Duty
250 1800 447/449T 825339.00 C/A 46,947 449TTGS16045 2992 460 T-Stats 285* 96.5 1.00 51.85 C, US
Motors
300 1800 449T 825431.00 C/A 50,073 449TTGS16567 3032 460 T-Stats 339* 96.2 1.00 51.85 C, US, ◊
350 1800 449T 825432.00 C/A 55,036 449TTGS16564 — 460 T-Stats 395* 96.2 1.00 51.85 C, US, ◊
Note ◊ - Motors 825420.00, 825421.00, 825431.00 and 825432.00 have a Roller Bearing at
the Drive end for belted applications only
Explosion Proof
Motors
Duty Motors
Automotive
106
Explosion-Proof Motors
Tech Information
Three Phase - C Face Less Base
Division I, Class I, Groups C&D - Class II, Groups F&G - W/Conduit Box
SYN App. Over- F.L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps % F .L . Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @230 V Eff Factor (Inches) Notes
1/3 3600 56C 111944.00 √ 1,156 A6T34EC23 28 208-230/460 Auto 1.1 78.5 1.00 11.97 S, US,12
ODP Motors
Single Phase
1/3 1800 56C 111931.00 √ 1,240 A6T17EC23 29 208-230/460 Auto 1.2 74.5 1.00 11.97 S, US,12
1/3 1800 56C 117860.00 √ 1,222 C6T17EC30 29 208-230/460 T-Stats 1.2 74.5 1.00 11.97 S, US,12
1/2 3600 56C 111933.00 √ 1,203 A6T34EC22 33 208-230/460 Auto 1.6 80.0 1.00 12.47 S, US,12
1/2 3600 56J 116187.00 √ 1,177 A6T34EC28 33 208-230/460 Auto 1.6 80.0 1.00 12.98 S, US,12
1/2 1800 56C 111930.00 √ 1,314 A6T17EC22 34 208-230/460 Auto 1.6 80.0 1.00 12.47 S, US,12
1/2 1800 56C 117852.00 √ 1,296 C6T17XC29 34 208-230/460 T-Stats 1.6 80.0 1.00 12.47 S, US,12
3/4 3600 56C 111936.00 √ 1,240 A6T34XC21 27 208-230/460 Auto 3.2 74.5 1.00 13.44 S, US,13
TEFC Motors
Single Phase
3/4 1800 56C 111935.00 √ 1,335 A6T17XC23 36 208-230/460 Auto 3.0 75.5 1.00 13.94 S, US,13
3/4 1800 56C 117853.00 √ 1,316 C6T17XC30 36 208-230/460 T-Stats 3.0 75.5 1.00 13.94 S, US,13
1 3600 56C 119422.00 √ 1,424 A6T17XC47 35 230/460 Auto 3.0 80.0 1.00 13.94 S, US,13
1 3600 56J 119424.00 √ 1,436 A6T34XC49 36 230/460 Auto 3.0 80.0 1.00 14.45 S, US,13
1 1800 56C 119420.00 √ 1,565 A6T17XC52 49 230/460 Auto 3.3 85.5 1.00 15.94 S, US,13
1 1800 56C 119423.00 √ 1,546 C6T17XC51 49 230/460 T-Stats 3.3 85.5 1.00 15.94 S, US,13
11/2 3600 56C 119428.00 √ 1,478 A6T34XC48 49 208-230/460 Auto 4.2 84.0 1.00 15.94 S, US,13
11/2 3600 56J 119429.00 √ 1,440 A6T34XC50 52 208-230/460 Auto 4.0 84.0 1.00 15.94 S,US, 13
ODP Motors
Three Phase
11/2 1800 56C 119427.00 √ 1,584 A6T17XC49 51 230/460 Auto 4.6 86.5 1.00 15.94 S,US, 13
11/2 1800 56C 119430.00 √ 1,565 C6T17XC50 51 230/460 T-Stats 4.8 86.5 1.00 15.94 S,US, 13
2 3600 56C 119431.00 √ 1,470 A6T34XC51 55 230/460 Auto 5.0 85.5 1.15 16.44 S,US, 13
2 3600 56J 119434.00 √ 1,482 A6T34XC52 50 230/460 Auto 5.0 85.5 1.00 14.45 S,US, 13
2 1800 145TC 122174.00 √ 1,715 A145T17XC9 60 230/460 Auto 6.0 86.5 1.00 16.50 S,US, 13
2 18 00 1 45TC 122175.00 √ 1,698 C145T17XC10 60 230/460 T-Stats 6.0 86.5 1.00 16.50 S,US, 13
3 36 00 5 6C 119435.00 √ 1,841 A6T34XC53 59 208-230/460 Auto 7.6 87.5 1.00 15.94 S,US, 13
TEFC Motors
Three Phase
3 18 00 1 82TC 825116.00 √ 2,106 182TTGN16026 162 230/460 T-Stats 8.0 90.2 1.00 18.62 C,US, 13
5 36 00 1 84TC 825190.00 C/A 2,259 184TTGN16003 170 230/460 T-Stats 11.8 88.5 1.00 18.62 C,US, 13
5 18 00 1 84TC 825128.00 √ 2,259 184TTGN16026 176 230/460 T-Stats 12.4 90.2 1.00 18.62 C,US, 13
71/2 3600 213TC 825348.00 C/A 3,391 213TTGN16510 258 230/460 T-Stats 19.0 90.2 1.15 23.45 C,US, 13
71/2 1800 213TC 825192.00 C/A 3,362 213TTGN16026 279 230/460 T-Stats 19.2 91.7 1.00 23.45 C,US, 13
10 3600 215TC 825193.00 C/A 3,566 215TTGN16005 — 2 30/460 T-Stats 24.0 90.2 1.00 23.45 C,US, 13
10 1800 215TC 825194.00 C/A 3,537 215TTGN16026 304 230/460 T-Stats 25.0 91.7 1.00 23.45 C,US, 13
Inverter Duty
15 1800 254TC 825196.00 C/A 5,291 254TTGN16033 416 230/460 T-Stats 37.5 92.4 1.00 25.77 C,US, 13
Motors
20 1800 256TC 825198.00 C/A 6,039 256TTGN16033 — 2 30/460 T-Stats 48.0 93.0 1.00 25.77 C,US, 13
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
107
Explosion-Proof Motors
Tech Information
Three Phase - C Face Less Base
Division I, Class I, Groups C&D - Class II, Groups F&G - W/Conduit Box
SYN App. Over- F. L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Eff Factor (Inches) Notes
1/3 3600 56C 111944.00 √ 1,156 A6T34EC23 28 208-230/460 Auto 1.1 78.5 1.00 11.97 S, US, 12
Single Phase
ODP Motors
1/3 1800 56C 111931.00 √ 1,240 A6T17EC23 29 208-230/460 Auto 1.2 74.5 1.00 11.97 S, US, 12
1/3 1800 56C 117860.00 √ 1,222 C6T17EC30 29 208-230/460 T-Stats 1.2 74.5 1.00 11.97 S, US, 12
1/2 3600 56C 111933.00 √ 1,203 A6T34EC22 33 208-230/460 Auto 1.6 80.0 1.00 12.47 S, US, 12
1/2 3600 56J 116187.00 √ 1,177 A6T34EC28 33 208-230/460 Auto 1.6 80.0 1.00 12.98 S, US, 12
1/2 1800 56C 111930.00 √ 1,314 A6T17EC22 34 208-230/460 Auto 1.6 80.0 1.00 12.47 S, US, 12
1/2 1800 56C 117852.00 √ 1,296 C6T17XC29 34 208-230/460 T-Stats 1.6 80.0 1.00 12.47 S, US, 12
3/4 3600 56C 111936.00 √ 1,240 A6T34XC21 27 208-230/460 Auto 3.2 74.5 1.00 13.44 S, US, 13
TEFC Motors
Single Phase
3/4 1800 56C 111935.00 √ 1,335 A6T17XC23 36 208-230/460 Auto 3.0 75.5 1.00 13.94 S, US, 13
3/4 1800 56C 117853.00 √ 1,316 C6T17XC30 36 208-230/460 T-Stats 3.0 75.5 1.00 13.94 S, US, 13
1 3600 56C 119422.00 √ 1,424 A6T17XC47 35 230/460 Auto 3.0 80.0 1.00 13.94 S, US, 13
1 3600 56J 119424.00 √ 1,436 A6T34XC49 36 230/460 Auto 3.0 80.0 1.00 14.45 S, US, 13
1 1800 56C 119420.00 √ 1,565 A6T17XC52 49 230/460 Auto 3.3 85.5 1.00 15.94 S, US, 13
1 1800 56C 119423.00 √ 1,546 C6T17XC51 49 230/460 T-Stats 3.3 85.5 1.00 15.94 S, US, 13
1 1/2 3600 56C 119428.00 √ 1,478 A6T34XC48 49 208-230/460 Auto 4.2 84.0 1.00 15.94 S, US, 13
1 1/2 3600 56J 119429.00 √ 1,440 A6T34XC50 52 208-230/460 Auto 4.0 84.0 1.00 15.94 S, US, 13
ODP Motors
Three Phase
1 1/2 1800 56C 119427.00 √ 1,584 A6T17XC49 51 230/460 Auto 4.6 86.5 1.00 15.94 S, US, 13
1 1/2 1800 56C 119430.00 √ 1,565 C6T17XC50 51 230/460 T-Stats 4.8 86.5 1.00 15.94 S, US, 13
2 3600 56C 119431.00 √ 1,470 A6T34XC51 55 230/460 Auto 5.0 85.5 1.15 16.44 S, US, 13
2 3600 56J 119434.00 √ 1,482 A6T34XC52 50 230/460 Auto 5.0 85.5 1.00 14.45 S, US, 13
2 1800 145TC 122174.00 √ 1,715 A145T17XC9 60 230/460 Auto 6.0 86.5 1.00 16.50 S, US, 13
2 1800 145TC 122175.00 √ 1,698 C145T17XC10 60 230/460 T-Stats 6.0 86.5 1.00 16.50 S, US, 13
3 3600 56C 119435.00 √ 1,841 A6T34XC53 59 208-230/460 Auto 7.6 87.5 1.00 15.94 S, US, 13
TEFC Motors
Three Phase
3 1800 182TC 825116.00 √ 2,106 182TTGN16026 162 230/460 T-Stats 8.0 90.2 1.00 18.62 C, US, 13
5 3600 184TC 825190.00 C/A 2,259 184TTGN16003 170 230/460 T-Stats 11.8 88.5 1.00 18.62 C, US, 13
5 1800 184TC 825128.00 √ 2,259 184TTGN16026 176 230/460 T-Stats 12.4 90.2 1.00 18.62 C, US, 13
7 1/2 3600 213TC 825348.00 C/A 3,391 213TTGN16510 258 230/460 T-Stats 19.0 90.2 1.15 23.45 C, US, 13
7 1/2 1800 213TC 825192.00 C/A 3,362 213TTGN16026 279 230/460 T-Stats 19.2 91.7 1.00 23.45 C, US, 13
10 3600 215TC 825193.00 C/A 3,566 215TTGN16005 — 230/460 T-Stats 24.0 90.2 1.00 23.45 C, US, 13
10 1800 215TC 825194.00 C/A 3,537 215TTGN16026 304 230/460 T-Stats 25.0 91.7 1.00 23.45 C, US, 13
Inverter Duty
15 1800 254TC 825196.00 C/A 5,291 254TTGN16033 416 230/460 T-Stats 37.5 92.4 1.00 25.77 C, US, 13
Motors
20 1800 256TC 825198.00 C/A 6,039 256TTGN16033 — 230/460 T-Stats 48.0 93.0 1.00 25.77 C, US, 13
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
107
Tech Information Explosion-Proof Motors
Three Phase - C Face With Base
Single Phase
ODP Motors
Division I, Division II, Class I, Groups C&D - Class II, Groups F&G - W/Conduit Box
SYN App. Over- F. L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Eff Factor (Inches) Notes
1/3 3600 56C 114625.00 √ 1,167 A6T34EK1 33 208-230/460 Auto. 1.1 78.5 1.00 11.97 S, US, 12
1/3 1800 56C 114626.00 √ 1,261 A6T17EK7 38 208-230/460 Auto. 1.2 74.5 1.00 11.97 S, US, 12
1/3 1800 56C 117859.00 √ 1,203 C6T17EK11 38 208-230/460 T-Stats 1.2 74.5 1.00 11.97 S, US, 12
TEFC Motors
Single Phase
1/2 3600 56C 114627.00 √ 1,218 A6T34EK2 35 208-230/460 Auto. 1.6 80.0 1.00 12.47 S, US, 12
1/2 1800 56C 114628.00 √ 1,318 A6T17EK8 35 208-230/460 Auto. 1.6 80.0 1.00 12.47 S, US, 12
1/2 1800 56C 116190.00 √ 1,278 C6T17XK23 34 208-230/460 T-Stats 2.4 68.0 1.00 13.44 S, US, 13
3/4 3600 56C 114629.00 √ 1,366 A6T34XK2 33 208-230/460 Auto. 3.2 74.0 1.00 13.44 S, US, 13
3/4 1800 56C 114630.00 √ 1,346 A6T17XK11 42 208-230/460 Auto. 3.0 75.5 1.00 13.94 S, US, 13
3/4 1800 56C 116191.00 √ 1,318 C6T17XK24 38 208-230/460 T-Stats 3.0 75.5 1.00 13.44 S, US, 13
1 3600 56C 119436.00 √ 1,484 A6T34XK25 38 230/460 Auto. 3.0 80.0 1.00 13.94 S, US, 13
ODP Motors
Three Phase
1 1800 56C 119437.00 √ 1,584 A6T17XK23 52 230/460 Auto. 3.3 85.5 1.00 15.94 S, US, 13
1 1800 56C 119438.00 √ 1,566 C6T17XK34 52 230/460 T-Stats 3.3 85.5 1.00 15.94 S, US, 13
1 1800 143TC 121919.00 √ 1,557 C143T17XK3 44 230/460 T-Stats 3.3 85.5 1.00 16.00 S, US, 13
1 1/2 3600 56C 119439.00 √ 1,491 A6T34XK24 47 208-230/460 Auto. 4.0 84.0 1.00 14.94 S, US, 13
1 1/2 1800 56C 119440.00 √ 1,627 A6T17XK35 51 230/460 Auto. 4.6 86.5 1.00 15.94 S, US, 13
1 1/2 1800 56C 119441.00 √ 1,617 C6T17XK36 51 230/460 T-Stats 4.6 86.5 1.00 15.94 S, US, 13
1 1/2 1800 145TC 121920.00 √ 1,613 C145T17XK6 58 230/460 T-Stats 4.6 86.5 1.15 16.00 S, US, 13
TEFC Motors
Three Phase
2 3600 56C 119442.00 √ 1,493 A6T34XK26 58 230/460 Auto. 5.0 85.5 1.00 16.44 S, US, 13
2 1800 145TC 121921.00 √ 1,797 C145T17XK7 62 230/460 Auto. 6.0 86.5 1.00 16.50 S, US, 13
2 1800 145TC 121922.00 √ 1,776 C145T17XK8 66 230/460 T-Stats 6.0 86.5 1.00 16.50 S, US, 13
3 3600 56C 119443.00 √ 1,864 C6T34XK24 66 230/460 Auto. 7.6 87.5 1.00 15.94 S, US, 13
3 3600 182TC 825125.00 √ 2,130 182TTGN16508 95 230/460 T-Stats 7.6 87.5 1.15 16.62 C, US, 13
3 1800 182TC 825126.00 √ 2,130 182TTGN16529 96 230/460 T-Stats 8.0 90.2 1.15 16.62 C, US, 13
5 3600 184TC 825127.00 √ 2,274 184TTGN16503 130 230/460 T-Stats 11.8 88.5 1.15 18.62 C, US, 13
5 1800 184TC 825071.00 √ 2,274 184TTGN16537 130 230/460 T-Stats 12.4 90.2 1.15 18.62 C, US, 13
Inverter Duty
7 1/2 3600 213TC 825072.00 √ 3,413 213TTGN16507 143 230/460 T-Stats 19.0 90.2 1.15 20.45 C, US, 13
Motors
7 1/2 1800 213TC 825073.00 √ 3,379 213TTGN16526 143 230/460 T-Stats 20.0 91.7 1.15 20.45 C, US, 13
10 3600 215TC 825074.00 √ 3,585 215TTGN16505 160 230/460 T-Stats 23.6 91.7 1.15 23.45 C, US, 13
10 1800 215TC 825075.00 √ 3,557 215TTGN16526 160 230/460 T-Stats 25.0 91.7 1.15 23.45 C, US, 13
15 3600 254TC 825076.00 C/A 4,535 254TTGN16507 245 230/460 T-Stats 35.0 91.7 1.15 24.02 C, US, 13
15 1800 254TC 825077.00 √ 5,314 254TTGN16540 246 230/460 T-Stats 37.5 92.4 1.15 24.02 C, US, 13
20 3600 256TC 825078.00 √ 6,090 256TTGN16513 271 230/460 T-Stats 47.0 92.4 1.15 25.77 C, US, 13
Severe Duty
20 1800 256TC 825079.00 √ 6,060 256TTGN16543 273 230/460 T-Stats 48.0 93.0 1.15 25.77 C, US, 13
Motors
25 3600 284TSC 825080.00 C/A 6,306 284TSTGN16506 373 230/460 T-Stats 57.5 93.0 1.15 24.96 C, US, 13
25 1800 284TC 825081.00 C/A 6,238 284TTGN16540 375 230/460 T-Stats 62.0 93.6 1.15 26.34 C, US, 13
30 1800 286TC 825082.00 C/A 7,088 286TTGN16538 395 230/460 T-Stats 73.0 94.1 1.15 27.84 C, US, 13
40 1800 324TC 825083.00 C/A 9,211 324TTGS1603 563 230/460 T-Stats 95.0 94.1 1.15 30.37 C, US, 13
50 1800 326TC 825084.00 √ 11,334 326TTGS16031 585 230/460 T-Stats 120.0 94.5 1.00 30.87 C, US, 13
Explosion Proof
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Motors
108
Explosion Proof Washguard
NEW!
Tech Information
Three Phase - C Face With Base - EPNV
Features:
• USDA-approved finish
Single Phase
ODP Motors
• Sealed bearings
• Interior corrosion protected
• Internally locked shaft-end bearing
• Shaft seals on both ends
• Cast iron frame & conduit box
• IP54 enclosure protection
TEFC Motors
Single Phase
• Potted Leads
• Normally closed T-Stats
• Premium efficiency
Division I, Division II, Class I, Groups C & D; Class II, Groups F & G - W/Conduit Box
ODP Motors
Three Phase
Three Phase - C Face With Base - EPNV
SYN App. Over- F. L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Eff Factor (Inches) Notes
1/2 1800 56CY 119955.00 √ 1,350 C6T17EK12 32 230/460 T-Stats 1.6 80.0 1.00 11.11 C, US
3/4 1800 56CY 119956.00 √ 1,377 C6T17EK13 35 230/460 T-Stats 2.4 81.5 1.00 11.11 C, US
1 1800 56CY 119957.00 √ 1,580 C6T17EK14 49 230/460 T-Stats 3.0 85.5 1.00 13.36 C, US
TEFC Motors
Three Phase
1 1800 143TC 122395.00 √ 1,580 C143T17EX1 50 230/460 T-Stats 3.0 85.5 1.00 13.42 C, US
1 1/2 1800 56CY 119958.00 √ 1,694 C6T17XK42 52 230/460 T-Stats 4.6 86.5 1.00 15.13 C, US
1 1/2 1800 145TC 122396.00 √ 1,694 C145T17EK10 53 230/460 T-Stats 4.8 86.5 1.00 15.19 C, US
2 1800 145TC 122397.00 √ 1,788 C145T17EK11 56 230/460 T-Stats 6.0 86.5 1.00 13.42 C, US
Green items are Premium Efficient Note listing on inside back flap
NOTE: 56 frame motors will have a non-NEMA BA Specifications are subject to change without notice
dimension- BA of a 143/5T frame motor
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
109
Tech Information Automotive Duty Motors
Lincoln Motors™ Automotive Duty Motors™
Single Phase
ODP Motors
Applications:
Ideally suited for a wide variety of tough applications found in automotive
manufacturing facilities and other industries utilizing U-Frame motors, which
would include pumps, conveyors and fans.
Inverter Duty
Motors
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Tech Information
Lincoln Automotive Duty Motors
Totally Enclosed - 56 Frame - 1/4 HP - 1 HP
Features:
• NEMA® Design B performance
Single Phase
ODP Motors
• Steel frame/cast aluminum end brackets
• Premium Class F insulation system
• Continuous duty
Application Notes:
Ideally suited for use on pumps, fans, conveyors,
TEFC Motors
Single Phase
gear boxes and other equipment located in
automotive manufacturing facilities.
ODP Motors
Three Phase
SYN App. F. L. “C”
Stock
TEFC Motors
Three Phase
1/2 3600 56 LM25126 C/A 650 SRN2H0.5T61 23 230/460 1.6 74.0 1.00 9.94 S, US, 12
1/2 1800 56 LM24258 √ 819 SRN4H0.5T61 26 230/460 2.0 77.0 1.00 10.44 S, MX, 12
1/2 1200 56 LM24268 √ 1,073 SRN6H0.5T61 42 230/460 1.9 78.5 1.00 11.94 S, MX, 12
3/4 3600 56 LM25133 C/A 743 SRN2H0.75T61 34 230/460 2.4 80.0 1.00 10.94 S, US, 12
3/4 1800 56 LM24266 C/A 907 SRN4H0.75T61 30 230/460 2.4 81.5 1.00 10.94 S, MX, 12
1 3600 56 LM25129 C/A 837 SRN2B1T61 41 230/460 2.8 82.5 1.00 11.94 S, US, 12
1 1800 56 LM34178 C/A 897 SRF4B1T61 37 230/460 3.3 85.5 1.00 14.62 S, MX, 13
Inverter Duty
Green items are Premium Efficient Note listing on inside back flap
Motors
C/A - Check Availability Specifications are subject to change without notice
Note 12 - TENV
Note 13 - TEFC
Severe Duty
Motors
Explosion Proof
Motors
Duty Motors
Automotive
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/4 1800 56C LM25131 C/A 740 SRN4H0.25TC61 20 208-230/460 1.1 68.0 1.15 9.94 S, US
1/4 1200 56C LM25135 √ 1,121 SRN6H0.25TC61 24 208-230/460 1.2 72.0 1.00 10.94 S, US
1/3 3600 56C LM25153 C/A 676 SRN2H0.33TC61 20 208-230/460 2.0 64.0 1.15 9.94 S, US
1/3 1800 56C LM25149 C/A 787 SRN4H0.33TC61 22 208-230/460 1.2 74.5 1.00 9.94 S, US
1/2 3600 56C LM25151 C/A 717 SRN2H0.5TC61 25 208-230/460 1.8 74.0 1.00 10.44 S, US
1/2 1800 56C LM25114 √ 890 SRN4H0.5TC61 24 208-230/460 2.0 77.0 1.00 10.44 S, MX
TEFC Motors
1/2 1200 56C LM25134 C/A 1,142 SRN6H0.5TC61 42 208-230/460 1.9 78.5 1.00 11.94 S, MX
Single Phase
3/4 3600 56C LM25119 C/A 815 SRN2H0.75TC61 34 208-230/460 2.4 80.0 1.00 10.94 S, US
3/4 1800 56C LM25121 √ 977 SRN4H0.75TC61 30 208-230/460 2.4 81.5 1.00 10.94 S, MX
1 3600 56C LM25125 C/A 906 SRN2B1TC61 41 208-230/460 2.8 82.5 1.00 11.94 S, US
1 1800 56C LM25117 D 851 SRF4H1TC61 31 208-230/460 3.6 77.0 1.00 12.31 S, MX
1 1800 56C LM34180 √ 983 SRF4B1TC61 42 208-230/460 3.3 85.5 1.00 14.15 S, MX, ◘
Green items are Premium Efficient Note listing on inside back flap
¦- meets 40° C @ 1.0 service factor Specifications are subject to change without notice
ODP Motors
Three Phase
1/2 3600 56C LM25154 C/A 717 SRN2H0.5TCN61 23 230/460 1.6 74.0 1.15 9.94 S, US
Motors
1/2 1800 56C LM24259 C/A 890 SRN4H0.5TCN61 26 230/460 2.0 77.0 1.00 10.44 S, MX
3/4 3600 56C LM25139 C/A 812 SRN2H0.75TCN61 26 230/460 2.0 84.0 1.15 11.94 S, US
3/4 1800 56C LM24262 C/A 977 SRN4H0.75TCN61 25 230/460 2.4 81.5 1.00 10.94 S, MX
1 3600 56C LM25112 C/A 907 SRN2B1TCN61 33 230/460 2.8 82.5 1.00 11.94 S, US
1 1800 56C LM34181 √ 983 SRF4B1TCN61 33 230/460 3.3 85.5 1.00 14.15 S, MX
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Severe Duty
112
Automotive Duty Motors
Tech Information
Lincoln Motors™ Automotive Duty Motors
U-Frame - Three Phase - 460 Volts
Features:
• Meets NEMA® U-Frame dimensional and performance standards
Single Phase
ODP Motors
• Meets or exceeds General Motors® GM-7EH and -7EQ, Ford® EM1, and Chrysler® NPEM-100
specifications
• Full cast iron construction – all frame sizes
• Oversized, cast iron terminal box with threaded conduit holes
• NEMA Design B performance
• Continuous duty
TEFC Motors
Single Phase
• Inverter-Rated
• Premium Class F insulation system
Application Notes:
Ideally suited for a wide variety of tough applications found in automotive manufacturing facilities
and other industries utilizing U-Frame motors.
ODP Motors
Three Phase
Lincoln Motors U-Frame motors exceed NEMA MG-1, Section IV, Part 31 spike resistance
requirements.
TEFC Motors
Three Phase
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 460 V Eff. Factor (Inches) Notes
3/4 1200 182U LM21379 C/A 1,443 CCN6P0.75U64 89 460 1.3 82.5 1.00 12.21 C, US
1 1800 182U LM21378 √ 1,358 CCN4B1U64 110 460 1.5 87.5 1.00 12.21 C, US
1 1200 184U LM21381 √ 1,659 CCN6B1U64 108 460 1.7 86.5 1.00 13.21 C, US
1 1/2 3600 182U LM21084 C/A 1,248 CCN2B1.5U64 108 460 2.0 85.5 1.00 12.21 C, US
1 1/2 1800 184U LM21380 C/A 1,453 CCN4B1.5U64 108 460 2.1 88.8 1.00 13.21 C, US
1 1/2 1200 184U LM20709 √ 1,825 CCN6B1.5U64 99 460 2.2 87.5 1.10 13.21 C, US
Inverter Duty
2 3600 184U LM21085 C/A 1,374 CCF2B2U64 120 460 2.7 85.5 1.00 15.69 C, US
Motors
2 1800 184U LM20708 √ 1,529 CCF4B2U64 120 460 2.6 89.5 1.00 15.69 C, US
2 1200 213U LM34354 C/A 2,186 CCF6B2U64 177 460 — 88.5 1.00 — C, US
3 3600 184U LM20707 √ 1,693 CCF2B3U64 120 460 3.8 87.5 1.00 15.69 C, US
3 1800 213U LM34115 √ 1,917 CCF4B3U64 177 460 3.9 89.5 1.00 19.25 C, US
3 1200 215U LM20391 C/A 2,507 CCF6B3U64 170 460 4.4 89.5 1.00 19.32 C, US
5 3600 213U LM34108 √ 2,084 CCF2B5U64 174 460 5.9 91.0 1.00 — C, US
5 1800 215U LM20392 C/A 2,332 CCF4B5U64 170 460 6.5 89.5 1.00 19.32 C, US
Severe Duty
5 1200 254U LM21385 C/A 3,673 CCF6B5U64 260 460 6.7 90.2 1.00 23.27 C, US
Motors
7 1/2 3600 215U LM34355 C/A 2,530 CCF2P7.5U64 — 460 — 91.7 1.00 — C, US
7 1/2 1800 254U LM21384 √ 3,065 CCF4B7.5U64 260 460 9.6 91.7 1.00 23.44 C, US
7 1/2 1200 256U LM20389 C/A 4,459 CCF6B7.5U64 332 460 9.9 91.0 1.00 25.02 C, US
10 3600 254U LM21087 C/A 2,705 CCF2B10U64 260 460 12.0 90.2 1.00 23.44 C, US
10 1800 256U LM20390 √ 3,723 CCF4B10U64 260 460 12.5 91.7 1.00 25.19 C, US
15 3600 256U LM20394 √ 3,445 CCF2B15U64 260 460 17.5 91.7 1.00 25.02 C, US
Explosion Proof
15 1800 284U LM21665 C/A 5,112 CCF4B15U64 525 460 18.0 92.4 1.00 26.56 C, US
Motors
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
C/A - Check Availability
Duty Motors
Automotive
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 460 V Eff. Factor (Inches) Notes
20 3600 286U LM21088 √ 4,684 CCF2B20U64 525 460 23.4 92.4 1.00 28.06 C, US
20 1800 286U LM20029 √ 6,284 CCF4B20U64 525 460 24.1 93.0 1.00 28.06 C, US
25 3600 324U LM21089 C/A 6,009 CCF2B25U64 748 460 28.1 93.6 1.00 29.34 C, US
25 3600 324US LM21807 C/A 6,009 CCF2B25US64 748 460 28.1 93.6 1.00 26.97 C, US
25 1800 324U LM34109 √ 8,610 CCF4B25U64 — 460 31.0 93.6 1.00 28.97 C, US
30 3600 326US LM34333 C/A 8,043 CCF2B30US64 — 460 — 91.7 1.00 — C, US
TEFC Motors
30 1800 326U LM20030 C/A 9,185 CCF4B30U64 748 460 36.0 94.1 1.00 30.74 C, US
Single Phase
40 3600 364US LM21091 C/A 9,464 CCF2B40US64 908 460 45.0 93.6 1.00 29.38 C, US
40 1800 364U LM21388 C/A 12,110 CCF4B40U64 977 460 46.5 94.1 1.00 32.00 C, US
50 3600 365US LM21092 C/A 11,940 CCF2B50US64 980 460 56.0 94.1 1.00 30.38 C, US
50 3600 365U LM21799 √ 11,940 CCF2B50U64 980 460 56.0 94.1 1.00 33.00 C, US
50 1800 365U LM19530 C/A 14,210 CCF4B50U64 1063 460 57.0 94.5 1.00 33.00 C, US
60 3600 405US LM19532 C/A 14,206 CCF2B60US64 1130 460 65.5 94.1 1.00 34.12 C, US
60 1800 405U LM21391 C/A 17,640 CCF4B60U64 1110 460 67.5 95.0 1.00 37.00 C, US
ODP Motors
Three Phase
75 3600 444US LM21093 C/A 18,668 CCF2B75US64 1685 460 84.0 94.1 1.00 38.94 C, US
75 1800 444U LM34110 C/A 24,367 CCF4B75U64Y — 460 85.0 95.4 1.00 43.47 C, US
75 1200 445U LM19535 C/A 25,434 CCF6B75U64 1787 460 90.0 95.0 1.00 43.70 C, US
100 3600 445US LM21094 C/A 24,672 CCF2B100US64 1685 460 113.0 95.4 1.00 38.94 C, US
100 1800 445U LM19534 C/A 27,048 CCF4B100U64 1787 460 113.0 95.4 1.00 43.47 C, US
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
TEFC Motors
Three Phase
1 1/2 1800 184UC LM23783 C/A 1,548 CCN4B1.5UCN64 120 460 2.1 88.5 1.00 13.96 C, US
Motors
2 1800 184UC LM23782 C/A 1,628 CCF4B2UCN64 132 460 2.6 89.5 1.00 16.22 C, US
3 1800 213UC LM34356 C/A 2,149 CCF4B3UCN64 — 460 — 89.5 1.00 — C, US
5 1800 215UC LM24072 √ 2,668 CCF4B5UCN64 181 460 6.5 89.5 1.00 20.08 C, US
7 1/2 1800 254UC LM23784 C/A 3,215 CCF4B7.5UCN64 385 460 9.6 91.7 1.00 23.94 C, US
114
Automotive Duty Motors
Tech Information
Lincoln Motors™ Automotive Duty Motors™
U-Frame - Three Phase - 460 Volts
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Single Phase
ODP Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 460 V Eff. Factor (Inches) Notes
3/4 1200 182UC LM21828 C/A 1,537 CCN6P0.75UC64 120 460 1.3 82.5 1.00 12.96 C, US
1 1800 182UC LM21827 C/A 1,453 CCN4B1UC64 120 460 1.5 87.5 1.00 12.96 C, US
1 1/2 3600 182UC LM21826 C/A 1,345 CCN2B1.5UC64 120 460 2.0 85.5 1.00 12.96 C, US
1 1/2 1800 184UC LM21833 C/A 1,548 CCN4B1.5UC64 120 460 2.1 88.5 1.00 13.96 C, US
2 3600 184UC LM21831 C/A 1,477 CCF2B2UC64 132 460 2.7 85.5 1.00 14.10 C, US
2 1800 184UC LM21832 C/A 1,628 CCF4B2UC64 132 460 2.6 89.5 1.00 16.22 C, US
TEFC Motors
3 3600 184UC LM21829 √ 1,764 CCF2B3UC64 132 460 3.8 87.5 1.00 16.22 C, US
Single Phase
3 1800 213UC LM34112 C/A 2,150 CCF4B3UC64 — 460 3.9 89.5 1.00 20.00 C, US
3 1200 215UC LM21841 C/A 2,620 CCF6B3UC64 181 460 4.4 89.5 1.00 20.08 C, US
5 3600 213UC LM21836 D 1,970 CCF2P5UC64 181 460 6.4 87.5 1.00 18.58 C, US
5 3600 213UC LM34113 C/A 2,265 CCF2B5UC64 181 460 5.9 91.0 1.00 20.00 C, US
5 1800 215UC LM21840 C/A 2,447 CCF4B5UC64 181 460 6.5 89.5 1.00 20.08 C, US
5 1200 254UC LM21844 C/A 3,632 CCF6B5UC64 272 460 6.7 90.2 1.00 23.77 C, US
7 1/2 3600 215UC LM34114 C/A 2,561 CCF2B7.5UC64 — 460 8.9 90.2 1.00 20.00 C, US
ODP Motors
Three Phase
7 1/2 1800 254UC LM21843 C/A 3,215 CCF4B7.5UC64 272 460 9.6 91.7 1.00 23.89 C, US
7 1/2 1200 256UC LM21847 C/A 3,989 CCF6P7.5UC64 260 460 9.9 91.0 1.00 25.52 C, US
10 3600 254UC LM34334 C/A 3,194 CCF2B10UC64 — 460 — 90.2 1.00 — C, US
10 1800 256UC LM21846 √ 3,872 CCF4B10UC64 272 460 12.5 91.7 1.00 25.64 C, US
15 3600 256UC LM21845 C/A 3,591 CCF2B15UC64 272 460 17.5 91.7 1.00 25.22 C, US
15 1800 284UC LM21848 √ 5,374 CCF4B15UC64 531 460 18.0 92.4 1.00 26.52 C, US
15 1200 324UC LM21854 C/A 7,787 CCF6B15UC64 757 460 19.2 92.4 1.00 32.50 C, US
TEFC Motors
Three Phase
20 3600 286UC LM21850 D 4,941 CCF2P20UC64 531 460 23.4 92.4 1.00 28.02 C, US
20 3600 286UC LM34335 C/A 5,682 CCF2B20UC64 — 460 — 91.0 1.00 — C, US
20 1800 286UC LM21851 C/A 6,538 CCF4B20UC64 531 460 24.1 93.0 1.00 28.02 C, US
20 1200 326UC LM21857 C/A 9,418 CCF6B20UC64 757 460 25.5 92.4 1.00 34.00 C, US
25 3600 324USC LM21893 C/A 6,443 CCF2B25USC64 755 460 28.1 93.6 1.00 27.22 C, US
25 1800 324UC LM21853 C/A 8,290 CCF4B25UC64 755 460 — 94.1 1.00 — C, US
30 3600 326USC LM34336 C/A 8,846 CCF2B30USC64 — 460 — 91.7 1.00 — C, US
Inverter Duty
30 1800 326UC LM21856 C/A 9,613 CCF4B30UC64 755 460 36.0 94.1 1.00 34.00 C, US
Motors
40 3600 364USC LM21883 C/A 10,154 CCF2B40USC64 917 460 45.0 93.6 1.00 29.38 C, US
40 1800 364UC LM21859 C/A 12,801 CCF4B40UC64 986 460 46.5 94.1 1.00 32.00 C, US
50 3600 365USC LM21886 C/A 12,633 CCF2B50USC64 989 460 56.0 94.1 1.00 30.38 C, US
50 1800 365UC LM21862 C/A 14,900 CCF4B50UC64 1072 460 57.0 94.5 1.00 33.00 C, US
60 3600 405USC LM21890 C/A 15,023 CCF2B60USC64 1143 460 65.5 94.1 1.00 34.12 C, US
60 1800 405UC LM21866 C/A 18,462 CCF4B60UC64 1123 460 67.5 95.0 1.00 37.00 C, US
75 3600 444USC LM21877 C/A 19,685 CCF2B75USC64 1708 460 82.0 94.1 1.00 37.00 C, US
Severe Duty
75 1800 444UC LM34337 C/A 26,835 CCF4B75UC64 — 460 — 95.4 1.00 — C, US
Motors
100 3600 445USC LM21896 C/A 25,684 CCF2B100USC64 1708 460 — 95.4 1.00 — C, US
100 1800 445UC LM21872 C/A 28,058 CCF4B100UC64 1810 460 9.2 95.4 1.00 — C, US
115
Motors Pump Motors
Pump
Washguard
Motors
• Jet pump, JM & JP pump, carbonator pump and fire pump motors
• Wash down duty pump motors available
Duty Motors
Agricultural
Applications:
Designed for various applications that you may find in the pumping industry where direct
coupled motor to pump is required.
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
116
Pump Motors
Jet Pump Motors - Single Phase
Motors
Pump
General Specifications:
• NEMA® 56 C face mounting flange
• Keyed shafts made of carbon steel
Washguard
Motors
• Threaded shafts made of 416 grade stainless steel
• Dual rotation - key shaft motors only
• Quiet flow-through ventilation system
• Double sealed bearings on shaft end
• Terminal board with quick connects
• Locked shaft-end bearings
Duty Motors
Agricultural
• Automatic overload protection
• UL recognized and CSA certified
HVAC / Fan
Stock
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/2 3600 S56C 100204.00 √ 412 A4C34DC4 22 115/208-230 Auto. 3.4 1.60 9.49 S, MX, 30
3/4 3600 S56C 100205.00 √ 543 A4C34DC5 24 115/208-230 Auto. 5.1 1.50 9.99 S, MX, 30
1 3600 S56C 100722.00 √ 586 A4C34DC21 27 115/208-230 Auto. 5.7 1.40 10.49 S, MX, 30
1 1⁄2 3600 56C 110288.00 √ 769 U6C34DC18 34 115/208-230 Auto. 9.0 1.30 11.34 S, US, 30
2 3600 56C 110289.00 √ 991 U6C34DC19 40 115/208-230 Auto. 10.5 1.25 12.34 S, US, 30
Special Voltage
3 3600 56C 117715.00 √ 1,013 U6K34DC19 51 230 Auto. 12.8 1.15 13.55 S, US, 30, 53
Motors
Note listing on inside back flap
Specifications are subject to change without notice
Purpose Motors
SYN App. Over- F. L. “C”
Stock
Definite
RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/2 3600 S56J 100207.00 √ 397 A4C34DC7 22 115/208-230 Auto. 3.4 1.60 10.00 S, MX, 30
3/4 3600 S56J 100208.00 √ 516 A4C34DC8 21 115/208-230 Auto. 5.1 1.50 10.50 S, MX, 30
1 3600 S56J 100723.00 √ 541 A4C34DC22 26 115/208-230 Auto. 5.7 1.40 11.00 S, MX, 30
1 1⁄2 3600 56J 119090.00 √ 631 A6C34DC75 25 115/208-230 Auto. 9.2 1.30 11.89 S, MX, 30
2 3600 56J 119091.00 √ 855 A6C34DC76 38 115/208-230 Auto. 10.6 1.20 13.73 S, MX, 30
Brake Motors
3 3600 56J 119092.00 √ 873 U6K34DC21 48 115/208-230 Auto. 14.7 1.15 13.17 S, MX, 30, 53
Note: 30 CW rotation only, lead end of motor Note listing on inside back flap
53 Capacitor start/capacitor run design for reduced Specifications are subject to change without notice
amperage, others are capacitor start/induction run
IEC Motors
DC Motors
Stock
RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
Washguard
Motors
1/2 3600 56J 113955.00 √ 465 A6C34FC44 25 115/208-230 Auto. 3.8 1.60 11.28 S, US, 30
3/4 3600 56J 113956.00 √ 553 A6C34FC45 28 115/208-230 Auto. 5.0 1.50 11.86 S, US, 30
1 3600 56J 113639.00 √ 676 A6C34FC41 33 115/208-230 Auto. 6.0 1.25 12.28 S, US, 30
1 1⁄2 3600 56J 113640.00 √ 803 A6C34FC42 33 115/208-230 Auto. 8.5 1.00 12.86 S, US, 30
2 3600 56J 113641.00 √ 949 U6C34FC34 44 115/208-230 Auto. 10.0 1.00 13.78 S, US, 30
Note 30 CW rotation only, lead end of motor Note listing on inside back flap
Specifications are subject to change without notice
Duty Motors
Agricultural
3/4 3600 56J 113638.00 √ 554 A6C34FK50 29 115/208-230 Auto. 5.0 1.50 11.78 S, US, 30
Motors
1 3600 56J 113957.00 √ 670 A6C34FK53 31 115/208-230 Auto. 6.0 1.25 12.28 S, US, 30
1 1⁄2 3600 56J 113958.00 √ 797 A6C34FK54 34 115/208-230 Auto. 8.5 1.00 12.78 S, US, 30
2 3600 56J 113959.00 √ 939 U6C34FK55 46 115/208-230 Auto. 10.0 1.00 13.86 S, US, 30
3/4 3600 56J 116186.00 √ 1072 A6C34XC32 43 115/208-230 Auto. 5.3 1.00 14.45 S, US
Definite
1 3600 56J 116185.00 √ 1,149 A6C34XC33 36 115/208-230 Auto. 6.2 1.00 14.95 S, US
11⁄2 3600 56J 116183.00 √ 1,474 A6C34XC34 40 115/208-230 Auto. 7.7 1.00 14.95 S, US
2 3600 56J 116181.00 √ 1,602 A6C34XC35 43 115/208-230 Auto. 10.0 1.00 15.45 S, US
Note 30 CW rotation only, lead end of motor Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
Drip-Cover Kits
Each kit includes one drip-cover, designed to protect motors from rain,
snow and ice when mounted outdoors in a vertical position.
App.
Catalog Wgt. List
Frame Number (lbs) Price Notes
48-S56 175003.00 2 65
48-S56 175298.00 2 65 P
56 / 143T-145T 175004.00 2 76
Note P - For motors having a “P” suffix on date code
DC Motors
118
Pump Motors
Jet Pump Motors - Three Phase
Motors
Pump
General Specifications:
• NEMA® 56 C face mounting flange
• Threaded shafts made of 303 grade stainless steel
Washguard
Motors
• CCW rotation facing lead end
• Quiet flow-through ventilation system
• Double sealed bearings on shaft end
• Terminal board with quick connects
• Locked shaft end bearings
• Automatic overload protection on explosion proof
Duty Motors
Agricultural
jet pump motors
• UL recognized and CSA certified
HVAC / Fan
Stock
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V EFF. Factor (Inches) Notes
1/3 3600 S56J 102197.00 C/A 413 C4T34DC25 16 230/460 1.4 68.0 1.35 9.69 S, US
1/3 1800 S56J 103723.00 C/A 450 C4T17DC50 16 208-230/460 1.8 64.3 1.35 10.00 S, MX
1/2 3600 S56J 102198.00 √ 435 C4T34DC26 20 208-230/460 1.8 69.0 1.25 9.75 S, US
1/2 1800 S56J 103724.00 √ 489 C4T17DC51 18 230/460 2.0 68.0 1.25 10.50 S, MX
3/4 3600 S56J 101637.00 √ 524 C4T34DC20 21 230/460 2.4 79.0 1.15 10.19 S, US
Special Voltage
3/4 1800 S56J 103725.00 √ 576 C4T17DC52 19 230/460 2.8 75.0 1.25 11.00 S, MX
Motors
1 3600 S56J 101638.00 √ 581 C4T34DC21 25 230/460 3.0 78.0 1.15 11.44 S, US
1 1800 56J 117872.00 √ 667 C6T17DC89 15 208-230/460 4.2 78.5 1.15 10.87 S, US
1 1/2 3600 56J 113891.00 √ 695 C6T34DC64 31 208-230/460 4.2 81.5 1.15 11.34 S, US
1 1/2 1800 56J 117873.00 √ 725 C6T17DC87 28 230/460 5.6 78.5 1.15 11.37 S, US
2 3600 56J 113892.00 √ 825 C6T34DC65 34 208-230/460 5.6 82.5 1.15 11.84 S, US
2 1800 56J 117874.00 √ 829 C6T17DC88 34 230/460 6.2 78.5 1.15 11.87 S, US
Purpose Motors
3 3600 56J 113893.00 √ 975 C6T34DC66 39 230/460 7.6 84.0 1.15 12.34 S, US
Definite
5 3600 56J 116698.00 √ 1,070 C6T34DC92 52 230/460 12.4 85.5 1.15 13.68 S, US
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
SYN App. F. L. “C”
Stock
1 1800 56J 117875.00 √ 683 C6T17DK34 24 208-230/460 4.2 78.5 1.15 10.87 S, US
1 1/2 3600 56J 114203.00 √ 712 C6T34DK5 32 208-230/460 4.2 81.5 1.15 11.34 S, US
1 1/2 1800 56J 117876.00 √ 750 C6T17DK35 33 230/460 5.6 78.5 1.15 11.37 S, US
2 3600 56J 114202.00 √ 849 C6T34DK6 36 208-230/460 5.6 82.5 1.15 11.84 S, US
3 3600 56HJ 114201.00 √ 1,001 C6T34DK7 41 230/460 7.6 84.0 1.15 12.34 S, US
5 3600 56HJ 116699.00 √ 1,098 C6T34DK18 53 230/460 12.4 85.5 1.15 13.68 S, US
Stock
RPM NEMA Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V EFF. Factor (Inches) Notes
1/2 3600 56J 114931.00 √ 492 C6T34FC49 23 208-230/460 2.0 72.0 1.15 10.28 S, US
3/4 3600 56J 114208.00 √ 543 C6T34FC37 23 208-230/460 2.4 75.5 1.15 10.78 S, US
1 3600 56J 114207.00 √ 646 C6T34FC38 24 230/460 3.2 77.0 1.15 10.78 S, US
Duty Motors
Agricultural
1 1⁄2 3600 56J 119453.00 √ 772 C6T34FC124 41 230/460 4.0 84.0 1.15 12.66 S, US
2 3600 56J 119455.00 √ 973 C6T34FC125 44 208-230/460 4.8 85.5 1.15 13.66 S, US
3 3600 56J 119456.00 √ 1,028 C6T34FC126 49 230/460 8.0 86.5 1.15 14.16 S, US
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
Special Voltage
1 1⁄2 3600 56J 119452.00 √ 802 C6T34FK134 35 230/460 4.0 84.0 1.15 12.66 S, US
2 3600 56J 119454.00 √ 993 C6T34FK135 46 208-230/460 4.8 85.5 1.15 13.66 S, US
Definite
3 3600 56HJ 119457.00 √ 1,042 C6T34FK136 46 208-230/460 8.0 86.5 1.15 14.16 S, US
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
IEC Motors
Threaded Shaft - Explosion Proof - TEFC/TENV Three Phase - C Face Less Base
SYN App. F. L. “C”
Stock
1 1⁄2 3600 56J 119429.00 √ 1,440 A6T34XC50 48 208-230/460 4.0 84.0 1.00 15.45 S, US, 13
2 3600 56J 119434.00 √ 1,482 A6T34XC52 50 230/460 5.0 85.5 1.00 16.95 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
120
Pump Motors
Washguard® Jet Pump Motors
Motors
Pump
Wash down duty three phase jet pump motors for industrial
service. These motors include all of the features of White
Duck™ Washguard motors with the addition of a 56J threaded
Washguard
shaft for use on jet pumps. For demanding pump applications
Motors
in wet, humid, or washdown environments.
Duty Motors
Agricultural
SYN App. F. L. “C”
Stock
HVAC / Fan
Motors
3 3600 56J 119462.00 √ 1,404 C6T34WC26 55 208-230/460 8.0 86.5 1.15 14.37 S, US
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
Washguard - Jet Pump - Threaded Shaft
Three Phase - TEFC - C Face With Base
Purpose Motors
SYN App. F. L. “C”
Definite
Stock
Brake Motors
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
IEC Motors
DC Motors
121
Pump Motors
Carbonator Pump Motors
Motors
Pump
Application information:
Used in liquid transfer pumps that you may see in vending machines
Washguard
Features:
• Interchangeable with OEM units
• Automatic overload protection
• Ball bearing designs
Duty Motors
Agricultural
1/4 1800 48Y 103530.00 √ 255 A4S17DR63 16 115/208-230 4.3-2.2 1.00 8.75 S, MX, 63
1/3 1800 48Y 103521.00 √ 259 A4S17DR64 14 100-120/200-240 5.5-5.6/2.7-2.8 1.00 7.69 S, MX, 60
1/3 1800 48Y 103531.00 √ 266 A4S17DR65 14 100-120/200-240 5.5-5.6/2.7-2.8 1.00 7.69 S, MX, 63
1/2 1800 48Y 103522.00 √ 290 A4S17DR66 17 100-120/200-240 7.1-7.2/3.4-3.6 1.00 8.75 S, MX, 63
3/4 1800 48Y 103523.00 √ 378 A4S17DR67 19 115/208-230 10.4/5.2 1.00 9.15 S, MX, 63
Note 60 - Rigid Base Note listing on inside back flap
Special Voltage
122
Pump Motors
JP Pump Motors - Single & Three Phase
Motors
Pump
General Specifications:
For use with close-coupled pumps where the pump impeller is mounted directly
Washguard
on the motor shaft. For outdoor use, an enclosure or drip cover may be preferred.
Motors
Features:
• Locked bearing on shaft end limits axial shaft movement.
• Drip cover kits available
• UL recognized and CSA certified
Duty Motors
Agricultural
Single Phase - Drip-Proof - C Face With Base
HVAC / Fan
SYN App. F. L. “C”
Motors
Stock
Special Voltage
Specifications are subject to change without notice
Motors
Three Phase - Drip-Proof - C Face With Base & C Face Less Base thru 3 HP
Note: When ordering catalog numbers beginning with GT, use the model number instead of the catalog number.
SYN App. F. L. “C”
Stock
Purpose Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V EFF. Factor (Inches) Notes
1 1800 143JP 122093.00 √ 662 C143T17DK9 46 230/460 3.0 85.5 1.15 18.18 S, US, 39
Definite
1 1800 143JPV* 122094.00 √ 662 C143T17DC20 47 230/460 3.0 85.5 1.15 18.48 S, US, 39
1 1⁄2 3600 143JP 122095.00 √ 876 C143T34DK6 46 230/460 3.8 86.5 1.15 17.68 S, US, 39
1 1⁄2 3600 143JPV* 122096.00 √ 807 C143T34DC8 49 230/460 3.8 86.5 1.15 17.98 S, US, 39
1 1⁄2 1800 145JP 122097.00 √ 860 C145T17DK25 48 230/460 4.4 86.5 1.15 18.18 S, US, 39
1 1⁄2 1800 145JPV* 122098.00 √ 792 C145T17DC45 49 230/460 4.4 86.5 1.15 18.48 S, US, 39
2 3600 145JPV* 122099.00 √ 825 C145T34DC15 49 230/460 5.6 86.5 1.15 16.48 S, US, 39
Brake Motors
2 1800 145JP 122100.00 √ 881 C145T17DK26 53 230/460 6.0 86.5 1.15 18.68 S, US, 39
2 1800 145JPV* 122101.00 √ 811 C145T17DC46 49 230/460 6.0 86.5 1.15 18.98 S, US, 39
3 3600 145JP 122102.00 √ 1,029 C145T34DK18 49 230/460 7.6 87.5 1.15 18.18 S, US, 39
3 3600 145JPV* 122103.00 √ 1,029 C145T34DC16 51 230/460 7.6 87.5 1.15 18.48 S, US, 39
3 1800 182JP 199770.00 D 1,174 C182T17DK44 152 230/460 7.6 90.2 1.15 15.35 S, CN
3 1800 182JP B199770.00 D 1,081 C182T17DK46 152 230/460 8.0 89.5 1.15 17.70 S, CN
3 1800 182JP GT2410A √ 1,081 182TTDBD6037 80 230/460 8.0 89.5 1.15 17.70 S, MX
3 1800 182JP GT2510A √ 1,081 182TTDBD6038 81 575 3.2 89.5 1.15 17.70 S, MX
IEC Motors
5 3600 182JP B199097.00 D 1,246 C182T34DK22 145 230/460 12.6 86.5 1.15 17.70 S, CN
5 3600 182JP GT2412A √ 1,246 182TTDBD6012 NULL 230/460 12.6 86.5 1.15 17.70 S, MX
5 3600 182JP GT2512A √ 1,246 182TTDBD6013 0 575 5.1 86.5 1.15 17.70 S, MX
5 1800 184JP B199772.00 D 1,218 C184T17DK46 175 230/460 12.6 89.5 1.15 18.70 S, CN
5 1800 184JP GT2413A √ 1,218 184TTDBD6037 175 230/460 12.6 89.5 1.15 18.70 S, MX
5 1800 184JP GT2513A √ 1,218 184TTDBD6038 0 575 5.1 89.5 1.15 18.70 S, MX
JPV frame motors are less base and have drip covers Continued On Next Page
DC Motors
Stock
RPM NEMA Catalog List Wgt. F. L. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V EFF. Factor (Inches) Notes
7 1⁄2 3600 184JP 199773.00 D 1,693 C184T34DK28 85 230/460 18.0 88.5 1.15 16.34 S, CN
Washguard
7 1⁄2 3600 184JP B199773.00 D 1,559 C184T34DK30 85 230/460 17.8 88.5 1.15 18.70 S, CN
Motors
7 1⁄2 3600 184JP GT2415A √ 1,559 184TTDBD6012 88 230/460 17.8 88.5 1.15 18.70 S, MX
7 1⁄2 3600 184JP GT2515A √ 1,559 184TTDBD6013 80 575 7.1 88.5 1.15 18.70 S, MX
7 1⁄2 1800 213JP B199783.00 D 1,989 C213T17DK49 166 230/460 19.8 91.7 1.15 23.11 S, CN
7 1⁄2 1800 213JP GT2416A √ 1,989 213TTDBD6037 153 230/460 19.8 91.7 1.15 23.11 S, MX
7 1⁄2 1800 213JP GT2516A √ 1,989 213TTDBD6038 140 575 7.6 91.7 1.15 23.11 S, MX
10 3600 213JP 199784.00 D 1,873 C213T34DK49 128 230/460 23.0 89.5 1.15 23.17 S, CN
10 3600 213JP B199784.00 D 1,873 C213T34DK52 128 230/460 24.3 89.5 1.15 23.11 S, CN
Duty Motors
Agricultural
10 3600 213JP GT2418A √ 1,873 213TTDBD6012 158 230/460 24.3 89.5 1.15 23.11 S, MX
10 3600 213JP GT2518A √ 1,873 213TTDBD6013 150 575 9.1 89.5 1.15 23.11 S, MX
10 1800 215JP B199785.00 D 2,269 C215T17DK50 157 230/460 25.4 92.4 1.15 23.11 S, CN
10 1800 215JP GT2419A √ 2,269 215TTDBD6037 153 230/460 25.4 91.7 1.15 23.11 S, MX
10 1800 215JP GT2519A √ 2,269 215TTDBD6038 147 575 10.3 91.7 1.15 23.11 S, MX
15 3600 215JP B199786.00 D 2,337 C215T34DK51 140 230/460 36.0 90.9 1.15 23.11 S, CN
15 1800 215JP GT2421A √ 2,337 215TTDBD6012 165 230/460 36.0 91.0 1.15 23.11 S, MX
15 1800 215JP GT2521A √ 2,337 215TTDBD6013 150 575 36.0 90.2 1.15 23.11 S, MX
HVAC / Fan
Motors
15 1800 254JP B199987.00 D 4,190 C254T17DK15 355 230/460 36.5 93.0 1.15 27.32 S, CN
15 1800 254JP GT2459 √ 4,190 254TTDBD6037 380 230/460 36.5 93.0 1.15 27.32 S, CN
15 1800 254JP GT2559 √ 4,190 254TTDBD6038 380 575 15.1 93.0 1.15 27.32 S, CN
20 3600 254JP 199988.00 D 3,620 C254T34DK10 327 230/460 45.0 91.7 1.15 24.41 C, CN
20 3600 254JP B199988.00 D 3,620 C254T34DK12 327 230/460 48.0 91.0 1.15 27.32 S, CN
20 3600 254JP GT2461 √ 3,620 254TTDBD6012 475 230/460 48.0 91.0 1.15 27.32 S, CN
20 3600 254JP GT2561 √ 3,620 254TTDBD6013 475 575 19.2 91.0 1.15 27.32 S, CN
Special Voltage
20 1800 256JP 199989.00 D 4,352 C256T17DK9 383 230/460 48.0 93.0 1.15 26.00 C, CN
Motors
20 1800 256JP B199989.00 D 4,352 C256T17DK11 383 230/460 48.5 93.0 1.15 28.90 S, CN
20 1800 256JP GT2462 √ 4,352 256TTDBD6037 375 230/460 48.5 93.0 1.15 28.90 S, CN
20 1800 256JP GT2562 √ 4,352 256TTDBD6038 375 575 19.5 93.0 1.15 28.90 S, CN
25 3600 256JP 199990.00 D 3,865 C256T34DK9 359 230/460 55.0 91.7 1.15 26.00 C, CN
25 3600 256JP B199990.00 D 3,865 C256T34DK11 359 230/460 59.5 91.7 1.15 28.90 S, CN
25 3600 256JP GT2464 √ 3,865 256TTDBD6012 325 230/460 59.5 91.7 1.15 28.90 S, CN
Purpose Motors
25 3600 256JP GT2564 √ 3,865 256TTDBD6013 325 575 23.8 91.7 1.15 28.90 S, CN
25 1800 284JP 199991.00 D 5,043 C284T17DK7 515 230/460 62.0 93.6 1.15 26.58 C, CN
Definite
25 1800 284JP B199991.00 D 5,043 C284T17DK9 500 230/460 62.0 93.6 1.15 29.53 S, CN
25 1800 284JP GT2465 √ 5,043 284TTDBD6037 500 230/460 62.0 93.6 1.15 29.53 S, CN
25 1800 284JP GT2565 √ 5,043 284TTDBD6038 500 575 24.8 93.6 1.15 29.53 S, CN
30 3600 284JP 199992.00 D 4,708 C284T34DK5 497 230/460 66.5 91.7 1.15 26.58 C, CN
30 3600 284JP B199992.00 D 4,708 C284T34DK7 472 230/460 71.5 91.7 1.15 29.53 S, CN
30 3600 284JP GT2469 √ 4,708 284TTDBD6012 472 230/460 71.5 91.7 1.15 29.53 S, CN
30 3600 284JP GT2569 √ 4,708 284TTDBD6013 472 575 28.6 91.7 1.15 29.53 S, CN
Brake Motors
30 1800 284JP 199993.00 D 5,652 C286T17DK8 554 230/460 74.0 94.1 1.15 27.10 C, CN
30 1800 286JP B199993.00 D 5,652 C286T17DK10 489 230/460 72.5 94.1 1.15 30.91 S, CN
30 1800 286JP GT2467 √ 5,652 286TTDBD6037 489 230/460 72.5 94.1 1.15 30.91 S, CN
30 1800 286JP GT2567 √ 5,652 286TTDBD6038 489 575 29.0 94.1 1.15 30.91 S, CN
40 3600 286JP B199994.00 D 5,101 C286T34DK6 588 230/460 93.0 92.4 1.15 30.91 S, CN
40 3600 286JP GT2472 √ 5,101 286TTDBD6012 588 230/460 93.0 92.4 1.15 30.91 S, CN
40 3600 286JP GT2572 √ 5,101 286TTDBD6013 588 575 37.5 92.4 1.15 30.91 S, CN
40 1800 286JP 199995.00 D 6,565 C324T17DK13 655 230/460 95.0 94.5 1.15 28.95 C, CN
IEC Motors
40 1800 324JP B199995.00 D 6,565 C324T17DK14 649 230/460 95.5 94.1 1.15 31.82 S, CN
40 1800 324JP GT2473 √ 6,565 324TTDBD6037 649 230/460 95.5 94.5 1.15 31.82 S, CN
40 1800 324JP GT2573 √ 6,565 324TTDBD6038 649 575 38.5 94.5 1.15 31.82 S, CN
50 3600 324JP 199996.00 D 6,196 C324T34DK5 661 230/460 114 94.1 1.15 28.95 C, CN
50 3600 324JP B199996.00 D 6,196 C324T34DK6 676 230/460 115 93.0 1.15 31.82 S, CN
50 3600 324JP GT2476 √ 6,196 324TTDBD6012 676 230/460 115 93.0 1.15 31.82 S, CN
50 3600 324JP GT2576 √ 6,196 324TTDBD6013 676 575 46.0 93.0 1.15 31.82 S, CN
50 1800 326JP B199997.00 D 6,906 C326T17DK8 700 230/460 118 94.5 1.15 33.00 S, CN
DC Motors
50 1800 326JP GT2477 √ 6,906 326TTDBD6037 700 230/460 118 94.5 1.15 33.00 S, CN
50 1800 326JP GT2577 √ 6,906 326TTDBD6038 700 575 47.0 94.5 1.15 33.00 S, CN
124
Pump Motors
JM Pump Motors - Single Phase
Motors
Pump
General Specifications:
Designed for continuous duty service on close-
coupled pumps using NEMA® JM mounting
provisions.
Washguard
Features:
Motors
• Cooling air exhausts at shaft end for maximum
cooling
• Locked bearing shaft end
• Drip-cover kits available
Duty Motors
Agricultural
Electrical Features:
• High efficiency copper windings
• UL and CSA recognized designs
• Single phase designs are capacitor start/
induction run unless indicated otherwise
HVAC / Fan
Motors
Single Phase - Drip-Proof - C Face With Base
SYN App. F. L. “C”
Stock
Special Voltage
1 1⁄2 1800 145JM 120994.00 √ 1,022 C145K17DK8 48 115/208-230 8.6 1.15 14.91 S, US, 38, 53
Motors
2 3600 145JM 121190.00 √ 1,045 C145C34DK3 47 115/208-230 10.5 1.15 14.91 S, US, 38
2 1800 145JM 120995.00 √ 1,024 C145K17DK9 47 115/208-230 10.5 1.15 15.41 S, US, 38, 53
2 1800 182JM 132073.00 √ 1,070 C182C17DK3 70 115/230 12.4 1.15 14.82 S, MX, 45
3 3600 182JM 131640.00 √ 1,237 C182K34DK1 72 115/208-230 14.0 1.15 15.82 S, MX, 45, 53
3 1800 182JM 131604.00 √ 1,422 C182C17DK2 76 115/230 16.9 1.15 15.82 S, MX, 45
5 3600 184JM 131641.00 √ 1,760 C184K34DK3 95 208-230 22.0 1.15 16.32 S, MX, 45, 53
Purpose Motors
5 1800 184JM 131605.00 √ 2,021 C184K17DK14 87 208-230 21.0 1.15 16.32 S, MX, 45, 53
Definite
7 1/2 3600 213JM 140642.00 √ 2,501 C213K34DK2 109 230 37.0 1.15 18.42 S, MX, 37, 53
7 1/2 1800 215JM 140665.00 √ 2,664 C215K17DK1 119 230 36.0 1.15 18.38 S, MX, 37, 53
10 3600 215JM 140644.00 √ 2,817 C215K34DK2 135 230 47.0 1.15 19.92 S, MX, 37, 53
10 1800 215JM 140666.00 D 3,296 C215K17DK2 147 230 43.0 1.15 19.88 S, MX, 37, 53
10 1800 215JM 141431.00 C/A 3,296 C215K17DK11 147 230 39.0 1.15 21.17 S, MX, 37, 53
C/A - Check Availability Note listing on inside back flap
D - to be discontinued when inventory is depleted Specifications are subject to change without notice
Brake Motors
Single Phase - TEFC - C Face With Base
SYN App. F. L. “C”
Stock
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Factor (Inches) Notes
3 3600 182JM 132457.00 √ 1,505 C182K34FC2 82 230 14.0 1.15 18.59 S, MX *
5 3600 184JM 132458.00 √ 1,591 C184K34FK6 95 230 19.8 1.00 18.59 S, MX
7 1⁄2 3600 213JM 141281.00 √ 1,877 C213F34FK2 133 230 32.0 1.00 20.59 S, MX
10 3600 215JM 141282.00 √ 2,179 C215K34FK3 156 230 41.5 1.15 22.09 S, MX
* C Face less Base Design Note listing on inside back flap
Specifications are subject to change without notice
DC Motors
Stock
60 NEMA Catalog List Wgt. Amps @ % F.L. Service Dim.
HP Hz Frame Number Price Model Number (lbs) Voltage 230 V EFF. Factor (Inches) Notes
Washguard
Motors
1 1800 143JM 122115.00 √ 830 C143T17DK8 46 230/460 3.0 85.5 1.15 15.12 S, US, 39
1 1800 143JMV* 122073.00 √ 902 C143T17DC17 44 230/460 3.0 85.5 1.15 15.42 S, US, 39
1 1⁄2 3600 143JM 122074.00 √ 991 C143T34DK4 38 230/460 3.8 84.0 1.15 14.62 S, US, 39
1 1⁄2 3600 143JMV* 122075.00 √ 913 C143T34DC6 45 230/460 3.8 86.5 1.15 14.92 S, US
1 1⁄2 1800 143JM 122076.00 √ 894 C143T17DK7 48 230/460 4.4 86.5 1.15 15.12 S, US, 39
Duty Motors
1 1⁄2 1800 143JMV* 122077.00 √ 971 C143T17DC18 46 230/460 4.4 86.5 1.15 15.42 S, US
Agricultural
2 3600 145JM 122078.00 √ 1,040 C143T34DK5 33 230/460 5.6 85.5 1.15 13.12 S, US, 39
2 3600 145JMV* 122079.00 √ 1,040 C143T34DC7 33 230/460 5.6 85.5 1.15 13.42 S, US
2 1800 145JM 122329.00 √ 1,007 C145T17DK19 49 230/460 6.0 86.5 1.15 15.12 S, US, 39
2 1800 145JMV* 122080.00 √ 1,007 C143T17DC19 49 230/460 6.0 86.5 1.15 15.92 S, US
3 3600 145JM 122081.00 √ 1,151 C145T34DK17 50 230/460 7.2 86.5 1.15 15.50 S, US, 38
HVAC / Fan
3 3600 145JMV* 122082.00 √ 1,250 C145T34DC14 47 230/460 7.2 86.5 1.15 13.62 S, US
Motors
3 1800 182JM 199589.00 D 1,331 C182T17DK43 79 230/460 7.6 89.5 1.15 15.35 S, CN
3 1800 182JM B199589.00 D 1,225 C182T17DK45 79 230/460 8.0 89.5 1.15 14.64 S, CN
3 1800 182JM GT0410A √ 1,225 182TTDBD6032 92 230/460 8.0 89.5 1.15 14.64 S, MX
5 3600 182JM 199763.00 D 1,592 C182T34DK20 73 230/460 12.4 86.5 1.15 15.35 S, CN
5 3600 182JM B199763.00 D 1,466 C182T34DK21 73 230/460 12.6 86.5 1.15 14.64 S, CN
Special Voltage
5 3600 182JM GT0412A √ 1,466 182TTDBD6007 164 230/460 12.6 86.5 1.15 14.64 S, MX
Motors
5 1800 184JM 199590.00 D 1,384 C184T17DK43 100 230/460 12.4 89.5 1.15 16.34 S, CN
5 1800 184JM B199590.00 D 1,384 C184T17DK45 100 230/460 12.6 89.5 1.15 15.64 S, CN
5 1800 184JM GT0413A √ 1,384 184TTDBD6032 175 230/460 12.6 89.5 1.15 15.64 S, MX
7 1⁄2 3600 184JM 199765.00 D 1,716 C184T34DK27 87 230/460 17.2 88.5 1.15 16.34 S, CN
Purpose Motors
7 1⁄2 3600 184JM B199765.00 D 1,580 C184T34DK29 87 230/460 17.8 88.5 1.15 15.64 S, CN
7 1⁄2 3600 184JM GT0415A √ 1,580 184TTDBD6007 88 230/460 17.8 88.5 1.15 15.64 S, MX
Definite
7 1⁄2 1800 213JM 199775.00 D 1,811 C213T17DK46 127 230/460 18.6 91.0 1.15 17.68 S, CN
7 1⁄2 1800 213JM B199775.00 D 1,811 C213T17DK48 127 230/460 19.8 91.0 1.15 19.22 S, CN
7 1⁄2 1800 213JM GT0416A √ 1,811 213TTDBD6032 136 230/460 19.8 91.7 1.15 19.22 S, MX
10 3600 213JM B199090.00 D 2,024 C213T34DK51 121 230/460 24.3 89.5 1.15 19.22 S, CN
10 3600 213JM GT0418A √ 2,024 213TTDBD6007 180 230/460 24.3 89.5 1.15 19.22 S, MX
Brake Motors
10 1800 215JM 199777.00 D 2,046 C215T17DK46 149 230/460 25.6 91.7 1.15 19.17 S, CN
10 1800 215JM B199777.00 D 2,046 C215T17DK49 149 230/460 25.4 91.7 1.15 19.22 S, CN
10 1800 215JM GT0419A √ 2,046 215TTDBD6032 185 230/460 25.4 92.4 1.15 19.22 S, MX
15 3600 215JM B199091.00 D 2,678 C215T34DK50 134 230/460 36.0 90.2 1.15 19.22 S, CN
15 3600 215JM GT0421A √ 2,675 215TTDBD6007 135 230/460 36.0 90.9 1.15 19.22 S, MX
15 1800 254JM 199964.00 D 2,942 C254T17DK12 353 230/460 36.5 93.0 1.15 24.41 C, CN
IEC Motors
15 1800 254JM B199964.00 D 2,942 C254T17DK15 353 230/460 36.5 93.0 1.15 24.41 S, CN
15 1800 254JM GT0459 √ 2,942 254TTDBD6032 287 230/460 36.5 93.0 1.15 24.41 S, MX
Continued On Next Page
Shaded model numbers are cast iron frame
Note listing on inside back flap
Green items are Premium Efficient
Specifications are subject to change without notice
D - Item to be discontinued once inventory is depleted 8
* JMV frame motors are less base and have a drip cover
DC Motors
126
Pump Motors
JM Pump Motors - ODP - Three Phase
Motors
Pump
Three Phase - Drip-Proof - C Face With Base
Note: When ordering catalog numbers beginning with GT, use the model number instead of the catalog number.
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz -
Frame riNumber
- Price Model Number (lbs) C Voltage 230 V EFF. Factor (Inches) Notes
Washguard
20 3600 254JM 199965.00 D 3,620 C254T34DK9 320 230/460 45.0 91.0 1.15 24.41 C, CN
Motors
20 3600 254JM B199965.00 D 3,620 C254T34DK12A 320 230/460 48.0 91.0 1.15 24.41 S, CN
20 3600 254JM GT0461 √ 3,620 254TTDBD6007 275 230/460 48.0 91.0 1.15 24.41 S, CN
20 3600 254JM GT0561 √ 3,620 254TTDBD6008 284 575 19.2 91.0 1.15 24.41 S, CN
20 1800 256JM 199966.00 D 4,360 C256T17DK8 382 230/460 48.0 91.0 1.15 24.41 C, CN
20 1800 256JM B199966.00 D 4,360 C256T17DK12 382 230/460 48.5 91.0 1.15 25.99 S, CN
20 1800 256JM GT0462 √ 4,360 256TTDBD6032 311 230/460 48.5 93.0 1.15 25.99 S, CN
Duty Motors
Agricultural
20 1800 256JM GT0562 √ 4,360 256TTDBD6033 290 575 19.5 93.0 1.15 25.99 S, CN
25 3600 256JM 199967.00 D 4,397 C256T34DK8 357 230/460 55.0 91.7 1.15 26.00 C, CN
25 3600 256JM B199967.00 D 4,397 C256T34DK11 357 230/460 59.5 91.7 1.15 25.99 S, CN
25 3600 256JM GT0464 √ 4,397 256TTDBD6007 291 230/460 59.5 91.7 1.15 25.99 S, CN
25 3600 256JM GT0564 √ 4,397 256TTDBD6008 302 575 23.8 91.7 1.15 25.99 S, CN
25 1800 284JM 199968.00 D 5,042 C284T17DK6 502 230/460 62.0 93.6 1.15 26.58 C, CN
25 1800 284JM B199968.00 D 5,042 C284T17DK9 388 230/460 62.0 93.6 1.15 26.58 S, CN
25 1800 284JM GT0465 √ 5,042 284TTDBD6032 388 230/460 62.0 93.6 1.15 26.58 S, CN
HVAC / Fan
Motors
25 1800 284JM GT0565 √ 5,042 284TTDBD6033 423 575 24.8 93.6 1.15 26.58 S, CN
30 3600 284JM 199969.00 D 5,097 C284T34DK4 486 230/460 66.5 91.7 1.15 26.58 C, CN
30 3600 284JM B199969.00 D 5,097 C284T34DK7A 486 230/460 71.5 91.7 1.15 26.58 S, CN
30 3600 284JM GT0469 √ 5,097 284TTDBD6007 486 230/460 71.5 91.7 1.15 26.58 S, CN
30 3600 284JM GT0569 √ 5,097 284TTDBD6008 357 575 28.6 91.7 1.15 26.58 S, CN
30 1800 286JM 199970.00 D 5,651 C286T17DK7 545 230/460 74.0 94.1 1.15 27.10 C, CN
Special Voltage
30 1800 286JM B199970.00 D 5,651 C286T17DK10A 545 230/460 72.5 94.1 1.15 27.09 S, CN
30 1800 286JM GT0467 √ 5,651 286TTDBD6032 545 230/460 72.5 94.1 1.15 27.09 S, CN
Motors
30 1800 286JM GT0567 √ 5,651 286TTDBD6033 545 575 29.0 94.1 1.15 27.09 S, CN
40 3600 286JM B199971.00 D 5,724 C286T34DK6A 465 230/460 93.0 92.4 1.15 27.09 S, CN
40 3600 286JM GT0472 √ 5,724 286TTDBD6007 465 230/460 93.0 92.4 1.15 27.09 S, CN
40 3600 286JM GT0572 √ 5,724 286TTDBD6008 462 575 37.5 92.4 1.15 27.09 S, CN
40 1800 324JM 199972.00 D 6,565 C324T17DK12 659 230/460 95.0 94.1 1.15 28.95 C, CN
Purpose Motors
40 1800 324JM B199972.00 D 6,565 C324T17DK14A 554 230/460 95.5 94.1 1.15 28.94 S, CN
40 1800 324JM GT0473 √ 6,565 324TTDBD6032 554 230/460 95.5 94.1 1.15 28.94 S, CN
Definite
40 1800 324JM GT0573 √ 6,565 324TTDBD6033 552 575 38.5 94.1 1.15 28.94 S, CN
50 3600 324JM B199973.00 D 6,873 C324T34DK6A 657 230/460 115.0 93.0 1.15 28.94 S, CN
50 3600 324JM GT0476 √ 6,873 324TTDBD6007 680 230/460 115.0 93.0 1.15 28.94 S, CN
50 3600 324JM GT0576 √ 6,873 324TTDBD6008 657 575 46.0 93.0 1.15 28.94 S, CN
50 1800 326JM 199974.00 D 7,000 C326T17DK6 697 230/460 118.0 94.5 1.15 30.12 C, CN
50 1800 326JM B199974.00 D 7,000 C326T17DK8A 608 230/460 118.0 94.5 1.15 30.12 S, CN
Brake Motors
50 1800 326JM GT0477 √ 7,000 326TTDBD6032 608 230/460 118.0 94.5 1.15 30.12 S, CN
50 1800 326JM GT0577 √ 7,000 326TTDBD6033 604 575 47.0 94.5 1.15 30.12 S, CN
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
D - Item to be discontinued once inventory is depleted
Catalog List
Frame Number Price Enclosure Notes
143-145JM 175004.00 66 ODP 38
143-145JM 175932.00 36 ODP 39
213-215JM 175305.00 116 ODP 37
213-215JM 175846.00 116 ODP 41
DC Motors
For use with motors having notes for Drip Cover kits
127
Pump Motors
JM Pump Motors - TEFC - Three Phase
Motors
Pump
General Specifications:
Designed for continuous duty service on close coupled pumps using NEMA®
JM mounting provisions. All motors have NEMA JM pump shaft and face
mount.
Features:
Washguard
Motors
motors.
• JMV frame (includes drip cover as noted) for vertical mount without base.
• JM frame has rigid base, drip cover not included.
• GT catalog numbers are Globetrotter dual branded motors
Three Phase - TEFC - C Face With Base
Note: When ordering catalog numbers beginning with GT, use the model number instead of the catalog number.
HVAC / Fan
Motors
RPM NEMA Catalog List Model Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Number (lbs) Voltage 230 V EFF. Factor (Inches) Notes
1 1800 143JM 122083.00 √ 899 C143T17FK27 59 230/460 3.2 85.5 1.15 15.42 S, US
1 1800 143JMV* 122084.00 √ 899 C143T17FC39 57 230/460 3.3 85.5 1.15 16.79 S, US
1 1⁄2 3600 143JM 122085.00 √ 928 C143T34FK17 63 230/460 4.0 84.0 1.15 15.50 S, US
1 1⁄2 3600 143JMV* 122086.00 √ 928 C143T34FC20 61 230/460 4.0 84.0 1.15 15.49 S, US
Special Voltage
1 1⁄2 1800 145JM 122087.00 √ 982 C145T17FK71 68 230/460 4.8 86.5 1.15 15.92 S, US
Motors
1 1⁄2 1800 145JMV* 122088.00 √ 982 C145T17FC121 66 230/460 4.6 86.5 1.15 17.29 S, US
2 3600 145JM 122089.00 √ 1,113 C145T34FK45 71 230/460 5.0 85.5 1.15 16.50 S, US
2 3600 145JMV* 122090.00 √ 1,113 C145T34FC42 69 230/460 5.0 85.5 1.15 17.29 S, US
2 1800 145JM 122091.00 √ 981 C145T17FK72 76 230/460 5.8 86.5 1.15 16.42 S, US
2 1800 145JMV* 122092.00 √ 981 C145T17FC122 74 230/460 6.0 86.5 1.15 17.79 S, US
3 3600 182JM 199766.00 D 1,247 C182T34FK43 83 230/460 7.6 86.5 1.15 17.51 S, CN
Purpose Motors
3 3600 182JM B199766.00 D 1,148 D182T34FK44 84 230/460 8.0 86.5 1.15 17.40 S, CN
Definite
3 3600 182JM GT3109A √ 1,148 182TTFBD6006 126 230/460 8.0 86.5 1.15 17.40 S, MX
3 3600 182JM GT3209A √ 1,148 182TTFBD6008 0 575 3.2 86.5 1.15 17.40 S, MX
3 1800 182JM 199767.00 D 1,177 C182T17FK48 87 230/460 7.8 89.5 1.15 17.51 S, CN
3 1800 182JM B199767.00 D 1,177 D182T17FK51 95 230/460 8.0 89.5 1.15 17.40 S, CN
3 1800 182JM GT3110A √ 1,177 182TTFBD6031 146 230/460 8.0 89.5 1.15 17.40 S, MX
3 1800 182JM GT3210A √ 1,177 182TTFBD6033 146 575 3.2 89.5 1.15 17.40 S, MX
5 3600 184JM B199768.00 D 1,600 D184T34FK56 98 230/460 12.0 88.5 1.15 18.40 S, CN
Brake Motors
5 3600 184JM GT3112A √ 1,600 184TTFBD6006 90 230/460 12.0 88.5 1.15 18.40 S, MX
5 3600 184JM GT3212A √ 1,600 184TTFBD6008 90 575 4.8 88.5 1.15 18.40 S, MX
5 1800 184JM 199769.00 D 1,557 C184T17FK49 110 230/460 12.4 89.5 1.15 18.36 S, CN
5 1800 184JM B199769.00 D 1,557 D184T17FK55 114 230/460 13.0 89.5 1.15 18.40 S, CN
5 1800 184JM GT3113A √ 1,557 184TTFBD6031 114 230/460 13.0 89.5 1.15 18.40 S, MX
5 1800 184JM GT3213A √ 1,557 184TTFBD6033 114 575 5.2 89.5 1.15 18.40 S, MX
7 1⁄2 3600 184JM B194323.00 D 1,906 C184T34FK58A 144 230/460 17.6 89.5 1.15 18.40 S, CN
IEC Motors
7 1⁄2 3600 213JM B199779.00 D 1,906 C213T34FK47 144 230/460 18.4 90.3 1.15 20.27 S, CN
7 1⁄2 3600 213JM GT3115A √ 1,906 213TTFBD6006 140 230/460 18.4 90.3 1.15 20.27 S, MX
7 1⁄2 3600 213JM GT3215A √ 1,906 213TTFBD6008 133 575 7.4 90.3 1.15 20.27 S, MX
7 1⁄2 1800 213JM B199780.00 D 2,125 C213T17FK49 163 230/460 19.0 93.3 1.15 20.27 S, CN
7 1⁄2 1800 213JM GT3116A √ 2,125 213TTFBD6031 160 230/460 19.0 93.3 1.15 20.27 S, MX
7 1⁄2 1800 213JM GT3216A √ 2,125 213TTFBD6033 162 575 7.6 93.3 1.15 20.27 S, MX
Green items are Premium Efficient Continued On Next Page
D - Item to be discontinued once inventory is depleted Note listing on inside back flap
DC Motors
*JMV frame motors are less base and have a drip cover Specifications are subject to change without notice
Motors
Pump
Three Phase - TEFC - C Face With Base
Note: When ordering catalog numbers beginning with GT, use the model number instead of the catalog number.
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V EFF. Factor (Inches) Notes
Washguard
10 3600 215JM B199781.00 D 2,433 C215T34FK49 164 230/460 23.6 90.2 1.15 21.85 S, CN
Motors
10 3600 215JM GT3118A √ 2,433 215TTFBD6006 170 230/460 23.6 90.2 1.15 21.85 S, MX
10 3600 215JM GT3218A √ 2,433 215TTFBD6008 163 575 9.5 90.2 1.15 21.85 S, MX
10 1800 215JM B199782.00 D 2,619 C215T17FK51 177 230/460 25.0 92.1 1.15 21.85 S, CN
10 1800 215JM GT3119A √ 2,619 215TTFBD6031 185 230/460 25.0 92.1 1.15 21.85 S, MX
10 1800 215JM GT3219A √ 2,619 215TTFBD6033 171 575 10.0 92.1 1.15 21.85 S, MX
15 3600 215JM B194322.00 D 2,833 C215T34FK52 185 230/460 35.0 91.0 1.15 21.85 S, CN
Duty Motors
Agricultural
15 3600 254JM 199975.00 D 3,736 C254T34FK15 343 230/460 34.0 91.0 1.15 26.60 C, CN
15 3600 254JM B199975.00 D 3,736 D254T34FK17 295 230/460 35.5 91.0 1.15 26.15 C, CN
15 3600 254JM GT3121A √ 3,736 254TTFCD6006 295 230/460 35.5 91.0 1.15 26.15 C, MX
15 3600 254JM GT3221A √ 3,736 254TTFCD6008 295 575 14.3 91.0 1.15 26.15 C, MX
15 1800 254JM B199976.00 D 3,782 D254T17FK18 309 230/460 37.5 92.4 1.15 26.15 C, CN
15 1800 254JM GT3122A √ 3,782 254TTFCD6031 309 230/460 37.5 92.4 1.15 26.15 C, MX
15 1800 254JM GT3222A √ 3,782 254TTFCD6033 309 575 15.1 92.4 1.15 26.15 C, MX
HVAC / Fan
20 3600 256JM 199977.00 D 4,064 C256T34FK11 382 230/460 45.0 91.0 1.15 27.80 C, CN
Motors
20 3600 256JM B199977.00 D 4,064 D256T34FK13 312 230/460 47.5 91.0 1.15 27.89 C, CN
20 3600 256JM GT3124A √ 4,064 256TTFCD6006 312 230/460 47.5 91.0 1.15 27.89 C, MX
20 3600 256JM GT3224A √ 4,064 256TTFCD6008 312 575 19.0 91.0 1.15 27.89 C, MX
20 1800 256JM B199978.00 D 4,749 D256T17FK18 360 230/460 48.5 93.0 1.15 27.89 C, CN
20 1800 256JM GT3125A √ 4,749 256TTFCD6031 360 230/460 48.5 93.0 1.15 27.89 C, MX
20 1800 256JM GT3225A √ 4,749 256TTFCD6033 360 575 19.4 93.0 1.15 27.89 C, MX
Special Voltage
25 3600 284JM B199979.00 D 4,842 D284T34FK14 490 230/460 60.0 93.6 1.15 27.52 C, CN
Motors
25 3600 284JM GT3127A √ 4,842 284TTFCD6006 403 230/460 60.0 91.7 1.15 27.52 C, MX
25 3600 284JM GT3227A √ 4,842 284TTFCD6008 405 575 24.0 91.7 1.15 27.52 C, MX
25 1800 284JM 199980.00 D 5,364 C284T17FK14 527 230/460 62.0 93.6 1.15 30.92 C, CN
25 1800 284JM B199980.00 D 5,364 D284T17FK15 527 230/460 61.0 93.6 1.15 27.52 C, CN
25 1800 284JM GT3128A √ 5,364 284TTFCD6032 462 230/460 61.0 93.6 1.15 27.52 C, MX
25 1800 284JM GT3228A √ 5,364 284TTFCD6033 404 575 24.3 93.6 1.15 27.52 C, MX
Purpose Motors
30 3600 286JM 199981.00 D 5,125 C286T34FK19 529 230/460 66.0 91.7 1.15 32.10 C, CN
30 3600 286JM B199981.00 D 5,125 D286T34FK20 529 230/460 71.0 91.7 1.15 29.02 C, CN
Definite
30 3600 286JM GT3130A √ 5,125 286TTFCD6006 500 230/460 71.0 91.7 1.15 29.02 C, MX
30 3600 286JM GT3230A √ 5,125 286TTFCD6008 540 575 28.5 91.7 1.15 29.02 C, MX
30 1800 286JM 199982.00 D 5,614 C286T17FK14 564 230/460 73.0 93.6 1.15 32.10 C, CN
30 1800 286JM B199982.00 D 5,614 D286T17FK17 564 230/460 72.5 93.6 1.15 29.02 C, CN
30 1800 286JM GT3131A √ 5,614 286TTFCD6032 500 230/460 72.5 93.6 1.15 29.02 C, MX
30 1800 286JM GT3231A √ 5,614 286TTFCD6033 500 575 29.1 93.6 1.15 29.02 C, MX
Brake Motors
40 3600 324JM 199983.00 D 6,639 C324T34FK11 642 230/460 88.0 92.4 1.15 32.93 C, CN
40 3600 324JM B199983.00 D 6,639 D324T34FK13 643 230/460 92.5 92.4 1.15 29.95 C, CN
40 3600 324JM GT3133A √ 6,639 324TTFCD6007 643 230/460 92.5 92.4 1.15 29.95 C, MX
40 3600 324JM GT3233A √ 6,639 324TTFCD6008 643 575 37.0 92.4 1.15 29.95 C, MX
40 1800 324JM 199984.00 D 6,762 C324T17FK15 683 230/460 94.0 94.1 1.15 32.93 C, CN
40 1800 324JM B199984.00 D 6,762 D324T17FK17 647 230/460 95.0 94.1 1.15 29.95 C, CN
40 1800 324JM GT3134A √ 6,762 324TTFCD6031 647 230/460 95.0 94.1 1.15 29.95 C, MX
40 1800 324JM GT3234A √ 6,762 324TTFCD6033 647 575 38.0 94.1 1.15 29.95 C, MX
IEC Motors
50 3600 326JM B199985.00 D 7,049 D326T34FK10 732 230/460 113.0 93.0 1.15 34.11 C, CN
50 3600 326JM GT3136A √ 7,049 326TTFCD6007 732 230/460 113.0 93.0 1.15 34.11 C, MX
50 3600 326JM GT3236A √ 7,049 326TTFCD6008 732 575 45.0 93.0 1.15 34.11 C, MX
50 1800 326JM 199986.00 D 7,972 C326T17FK11 732 230/460 119.0 94.5 1.15 34.11 C, CN
50 1800 326JM B199986.00 D 7,972 D326T17FK13 698 230/460 117.0 94.5 1.15 34.11 C, CN
50 1800 326JM GT3137A √ 7,942 326TTFCD6031 698 230/460 117.0 94.5 1.15 34.11 C, MX
50 1800 326JM GT3237A √ 7,942 326TTFCD6033 698 575 47.0 94.5 1.15 34.11 C, MX
DC Motors
129
Pump Motors
JP Pump Motors - TEFC - Three Phase
Motors
Pump
General Specifications:
For use with close-coupled pumps having NEMA® JP
mounting and shaft dimensions. Used in applications where
the pump impeller is mounted directly on the motor shaft.
Washguard
1 1800 143JP 122105.00 √ 1,014 C143T17FK28 59 230/460 3.3 85.5 1.15 19.13 S, US
1 1800 143JPV* 122106.00 √ 934 C143T17FC40 57 230/460 3.3 85.5 1.15 19.85 S, US
1 1/2 3600 143JP 122107.00 √ 964 C143T34FK18 63 230/460 4.0 84.0 1.15 18.63 S, US
1 1/2 3600 143JPV* 122108.00 √ 964 C143T34FC21 61 230/460 4.0 84.0 1.15 19.35 S, US
1 1/2 1800 145JP G151736.60 D 723 C145T17FK60 54 230/460 4.5 85.5 1.15 18.66 C, CN
1 1/2 1800 145JP 122109.00 √ 1,024 C145T17FK73 68 230/460 4.6 86.5 1.15 19.63 S, US
1 1/2 1800 145JPV* 122110.00 √ 1,024 C145T17FC123 66 230/460 4.6 86.5 1.15 20.35 S, US
Special Voltage
2 3600 145JP 122111.00 √ 1,160 C145T34FK46 71 230/460 5.0 85.5 1.15 19.63 S, US
2 3600 145JPV* 122112.00 √ 1,160 C145T34FC43 69 230/460 5.0 85.5 1.15 20.35 S, US
Motors
2 1800 145JP G151737.60 D 746 C145T17FK61 57 230/460 6.0 85.5 1.15 18.66 C, CN
2 1800 145JP 122113.00 √ 1,034 C145T17FK74 76 230/460 6.0 86.5 1.15 20.13 S, US
2 1800 145JP 122114.00 √ 1,122 C145T17FC124 74 230/460 6.0 86.5 1.15 20.85 S, US
3 3600 182JP G151738.60 D 1,354 C182T34FK12 91 230/460 7.4 85.5 1.15 20.71 C, CN
3 3600 182JP 199092.00 D 1,692 C182T34FK42 145 230/460 7.6 86.5 1.15 19.07 S, CN
3 3600 182JP B199092.00 D 1,558 D182T34FK45 126 230/460 8.0 86.5 1.15 20.44 S, CN
Purpose Motors
3 3600 182JP GT3409A √ 1,558 182TTFBD6012 126 230/460 8.0 86.5 1.15 20.44 S, MX
3 3600 182JP GT3509A √ 1,558 182TTFBD6013 126 575 3.2 86.5 1.15 20.44 S, MX
Definite
3 1800 182JP 199093.00 D 1,565 C182T17FK47 142 230/460 7.8 89.5 1.15 19.07 S, CN
3 1800 182JP B199093.00 D 1,441 D182T17FK52 142 230/460 8.0 89.5 1.15 20.44 S, CN
3 1800 182JP GT3410A √ 1,441 182TTFBD6037 142 230/460 8.0 89.5 1.15 20.44 S, MX
3 1800 182JP GT3510A √ 1,441 182TTFBD6038 142 575 3.2 89.5 1.15 20.44 S, MX
5 3600 184JP B199094.00 D 1,639 D184T34FK57 100 230/460 12.0 88.5 1.15 21.44 S, CN
5 3600 184JP GT3412A √ 1,639 184TTFBD6012 100 230/460 12.0 88.5 1.15 21.44 S, MX
5 3600 184JP GT3512A √ 1,639 184TTFBD6013 100 575 4.8 88.5 1.15 21.44 S, MX
Brake Motors
5 1800 184JP 199095.00 D 1,789 C184T17FK48 114 230/460 12.4 89.5 1.15 20.05 S, CN
5 1800 184JP B199095.00 D 1,648 D184T17FK56 114 230/460 13.0 89.5 1.15 21.44 S, CN
5 1800 184JP GT3413A √ 1,648 184TTFBD6037 97 230/460 13.0 89.5 1.15 21.44 S, MX
5 1800 184JP GT3513A √ 1,648 184TTFBD6038 96 575 5.2 89.5 1.15 21.44 S, MX
7 1⁄2 3600 213JP 199096.00 D 2,005 C213T34FK44 152 230/460 17.8 88.5 1.15 24.54 S, CN
7 1⁄2 3600 213JP B199096.00 D 2,005 C213T34FK48 152 230/460 18.4 88.5 1.15 24.01 S, CN
7 1⁄2 3600 213JP GT3415A √ 2,005 213TTFBD6012 180 230/460 18.4 90.3 1.15 24.01 S, MX
7 1⁄2 3600 213JP GT3515A √ 2,005 213TTFBD6013 165 575 7.4 90.3 1.15 24.01 S, MX
7 1⁄2 1800 213JP 199787.00 D 2,090 C213T17FK47 170 230/460 18.6 89.5 1.15 24.54 S, CN
IEC Motors
7 1⁄2 1800 213JP B199787.00 D 2,090 C213T17FK50 170 230/460 19.0 89.5 1.15 24.01 S, CN
7 1⁄2 1800 213JP GT3416A √ 2,090 213TTFBD6037 167 230/460 19.0 93.3 1.15 24.01 S, MX
7 1⁄2 1800 213JP GT3516A √ 2,090 213TTFBD6038 167 575 7.6 93.3 1.15 24.01 S, MX
10 3600 215JP B199788.00 D 2,300 C215T34FK50 190 230/460 23.6 90.2 1.15 25.78 S, CN
10 3600 215JP GT3418A √ 2,300 215TTFBD6012 167 230/460 23.6 90.2 1.15 25.78 S, MX
10 3600 215JP GT3518A √ 2,300 215TTFBD6013 165 575 9.5 90.2 1.15 25.78 S, MX
10 1800 215JP B199789.00 D 2,264 C215T17FK52 184 230/460 25.0 91.7 1.15 25.78 S, CN
10 1800 215JP GT3419A √ 2,264 215TTFBD6037 167 230/460 25.0 92.1 1.15 25.78 S, MX
10 1800 215JP GT3519A √ 2,264 215TTFBD6038 180 575 10.0 92.1 1.15 25.78 S, MX
DC Motors
Motors
Pump
TEFC JP Pump Motors - C Face With Base
Washguard
Note: When ordering catalog numbers beginning with GT, use the model number instead of the catalog number.
Motors
SYN App. “C”
Stock
RPM NEMA Catalog List Wgt. F. L. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V EFF. Factor (Inches) Notes
15 3600 254JP 199998.00 D 3,736 C254T34FK15 348 230/460 34.0 91.0 1.15 29.51 C, CN
15 3600 254JP B199998.00 D 3,736 D254T34FK17 320 230/460 35.5 91.0 1.15 29.02 C, CN
15 3600 254JP GT3421A √ 3,736 254TTFCD6012 320 230/460 35.5 91.0 1.15 29.02 C, MX
15 3600 254JP GT3521A √ 3,736 254TTFCD6013 319 575 14.3 91.0 1.15 29.02 C, MX
Duty Motors
Agricultural
15 1800 254JP B199999.00 D 3,782 D254T17FK18 365 230/460 37.5 92.4 1.15 29.02 C, CN
15 1800 254JP GT3422A √ 3,782 254TTFCD6037 365 230/460 37.5 92.4 1.15 29.02 C, MX
15 1800 254JP GT3522A √ 3,782 254TTFCD6038 365 575 15.1 92.4 1.15 29.02 C, MX
20 3600 256JP B194118.00 D 4,269 D256T34FK13 386 230/460 47.5 91.0 1.15 30.76 C, CN
20 3600 256JP GT3424A √ 4,269 256TTFCD6012 287 230/460 47.5 91.0 1.15 30.76 C, MX
20 3600 256JP GT3524A √ 4,269 256TTFCD6013 287 575 19.0 91.0 1.15 30.76 C, MX
20 1800 256JP B194119.00 D 4,749 D256T17FK18 287 230/460 48.5 93.0 1.15 30.76 C, CN
20 1800 256JP GT3425A √ 4,749 256TTFCD6037 364 230/460 48.5 93.0 1.15 30.76 C, MX
HVAC / Fan
20 1800 256JP GT3525A √ 4,749 256TTFCD6038 363 575 19.4 93.0 1.15 30.76 C, MX
Motors
25 3600 284JP 194120.00 D 4,842 C284T34FK13 432 230/460 55.5 91.7 1.15 33.82 C, CN
25 3600 284JP B194120.00 D 4,842 D284T34FK14 432 230/460 60.0 91.7 1.15 30.40 C, CN
25 3600 284JP GT3427A √ 4,842 284TTFCD6012 408 230/460 60.0 91.7 1.15 30.40 C, MX
25 3600 284JP GT3527A √ 4,842 284TTFCD6013 415 575 24.0 91.7 1.15 30.40 C, MX
25 1800 284JP 194121.00 D 5,363 C284T17FK15 530 230/460 62.0 93.6 1.15 33.82 C, CN
25 1800 284JP B194121.00 D 5,363 D284T17FK16 530 230/460 61.0 93.6 1.15 30.40 C, CN
25 1800 284JP GT3428A √ 5,363 284TTFCD6037 500 230/460 61.0 93.6 1.15 30.40 C, MX
Special Voltage
25 1800 284JP GT3528A √ 5,363 284TTFCD6038 551 575 24.3 93.6 1.15 30.40 C, MX
30 3600 286JP B194122.00 D 5,545 D286T34FK21 530 230/460 71.0 91.7 1.15 31.90 C, CN
Motors
30 3600 286JP GT3430A √ 5,445 286TTFCD6012 430 230/460 71.0 91.7 1.15 31.90 C, MX
30 3600 286JP GT3530A √ 5,445 286TTFCD6013 432 575 28.5 91.7 1.15 31.90 C, MX
30 1800 286JP B194123.00 D 5,614 D286T17FK17 571 230/460 72.5 93.6 1.15 31.90 C, CN
30 1800 286JP GT3431A √ 5,614 286TTFCD6037 542 230/460 72.5 93.6 1.15 31.90 C, MX
30 1800 286JP GT3531A √ 5,614 286TTFCD6038 542 575 29.1 93.6 1.15 31.90 C, MX
40 3600 324JP B194124.00 D 7,014 D324T34FK13 643 230/460 92.5 92.4 1.15 32.82 C, CN
Purpose Motors
40 3600 324JP GT3433A √ 7,014 324TTFCD6012 643 230/460 92.5 92.4 1.15 32.82 C, MX
40 3600 324JP GT3533A √ 7,014 324TTFCD6013 643 575 37.0 92.4 1.15 32.82 C, MX
Definite
40 1800 324JP B194125.00 D 7,120 D324T17FK17 647 230/460 95.0 94.1 1.15 32.82 C, CN
40 1800 324JP GT3434A √ 7,120 324TTFCD6037 647 230/460 95.0 94.1 1.15 32.82 C, MX
40 1800 324JP GT3534A √ 7,120 324TTFCD6038 647 575 38.0 94.1 1.15 32.82 C, MX
50 3600 326JP B194126.00 D 8,189 D326T34FK10 732 230/460 113.0 93.0 1.15 34.32 C, CN
50 3600 326JP GT3436A √ 8,189 326TTFCD6012 732 230/460 113.0 93.0 1.15 34.32 C, MX
50 3600 326JP GT3536A √ 8,189 326TTFCD6013 732 575 45.0 93.0 1.15 34.32 C, MX
50 1800 326JP 194127.00 D 8,232 C326T17FK12 737 230/460 119.0 94.5 1.15 36.99 C, CN
Brake Motors
50 1800 326JP B194127.00 D 8,232 D326T17FK13 698 230/460 117.0 94.5 1.15 34.32 C, CN
50 1800 326JP GT3437A √ 8,232 326TTFCD6037 698 230/460 117.0 94.5 1.15 34.32 C, MX
50 1800 326JP GT3537A √ 8,232 326TTFCD6038 698 575 47.0 94.5 1.15 34.32 C, MX
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
D - Item to be discontinued once inventory is depleted
JPV frame motors are less base and have a drip cover
IEC Motors
DC Motors
Product specification
Motor Type Three Phase Induction Motors Frame sizes 210TP through 449TP
Enclosure Water Protected Type 1 Frame construction Cast iron
Power Output 7.5HP up to 300HP Mounting Vertical round, P-Base
2 Pole (3600RPM) up to 100HP and 4 P-base material Cast iron
Speeds
Pole (1800RPM) through 300HP Canopy material Steel
Design Standard NEMA MG1 Conduit box material Cast iron
Duty Motors
"190/380V next lower HP for baseline incoming power from 12:00, 3:00,
230/460v 60Hz motor 6:00 or 9:00 positions
Standard voltage rating 50Hz
380V next lower hp for baseline 460v Grounding provision Inside C-Box
60Hz motor" Insulation Class Class F
Service Factor 1.15 S.F. capability @ 60Hz and 50Hz Insulation Type Inverter capable
"12 leads Y-start/D-run for 230/460v "Angular contact back to back up to
213-405 frame (PWS on 230v) frame size 405
Lead configuration
Special Voltage
Rise
Service Factor 1.15 S.F. capability @ 60Hz and 50Hz Insulated bearing No (See options)
Definite
Winding space heaters Standard feature Grease and Oil drain type and Lubrication holes in each bracket,
Winding temperature sensors None (See options) location holes are plugged
Modification capabilities Moisture drain hole in P-base and
Moisture drain type and location
left open.
Alternative sizes available as
P-Base Flanges Bearing current mitigation None (See options)
modification
Steady Bushings kits Available Shaft seal / slinger V-ring rubber shaft seal
Coupling Kits Available Nameplate material Stainless steel
Stamped, metal embossed or laser
IEC Motors
132
Pump Motors
Vertical Hollow Shaft Motors
Motors
Pump
Designed to drive deep well turbine water pumps for
drinking water as well as irrigation.
Washguard
Features:
Motors
• Water Protected Type 1 Enclosure
• NEMA® MG1 design
• Cast iron frame construction
• IP23 rated
• -20°C to 50° ambient operating temperature rating
Duty Motors
Agricultural
• Class F insulation
• Call sales office for pricing
HVAC / Fan
Motors
SYN “CD” “BD”
Stock
RPM NEMA App. Wgt. F. L. Amps % F.L. Dim. Dim. Max Down Thrust
HP 60 Hz Frame Catalog Number (lbs) Voltage @ 230 V EFF. (Inches) (Inches) Load (lbs)
7 1/2 3600 213TP 213VTDC6001 √ 195 230/460 18.8 88.5 20.25 10 1900
7 1/2 1800 213TP 213VTDC6026 √ 222 230/460 18.4 91.0 20.25 10 2300
10 3600 213TP 213VTDC6002 √ 205 230/460 25.0 89.5 20.25 10 1900
10 1800 215TP 215VTDC6026 √ 215 230/460 25.0 91.7 20.25 10 2300
Special Voltage
15 3600 215TP 215VTDC6001 √ 220 230/460 36.0 90.2 20.25 10 1800
Motors
15 1800 254TP 254VTDC6026 √ 300 230/460 37.0 93.0 23.38 10 3300
20 3600 254TP 254VTDC6001 √ 335 230/460 47.5 91.0 23.38 12 2600
20 1800 256TP 256VTDC6026 √ 385 230/460 50.0 93.0 23.38 12 3200
25 3600 256TP 256VTDC6001 √ 385 230/460 58.0 91.7 23.38 12 2600
25 1800 284TP 284VTDC6026 √ 780 230/460 62.0 93.6 24.75 12 3200
30 3600 284TP 284VTDC6001 √ 455 230/460 70.5 91.7 24.75 12 2600
Purpose Motors
30 1800 286TP 286VTDC6026 √ 570 230/460 72.5 94.5 24.75 12 3200
Definite
40 3600 286TP 286VTDC6001 √ 455 230/460 92.0 92.4 24.75 16 2500
40 1800 324TP 324VTDC6026 √ 511 230/460 96.5 94.1 28.22 16 5700
50 3600 324TP 324VTDC6001 √ 765 230/460 116.0 93.0 28.22 16 4500
50 1800 326TP 326VTDC6026 √ 780 230/460 120.0 94.5 28.22 16 5700
60 3600 326TP 326VTDC6001 √ 790 230/460 138.0 93.6 28.22 16 4500
60 1800 364TP 364VTDC6026 √ 1,183 230/460 150.0 95.0 31.16 16 5600
75 3600 364TP 364VTDC6001 √ 1,040 230/460 178.0 93.6 31.16 16 4500
Brake Motors
75 1800 365TP 365VTDC6026 √ 1,183 230/460 182.0 95.4 31.16 16 5500
100 3600 365TP 365VTDC6001 √ 1,180 230/460 246.0 93.6 31.16 16 4500
100 1800 404TP 404VTDC6026 √ 1,628 230/460 230.0 95.4 36.94 16 7300
125 1800 405TP 405VTDC6026 √ 1,750 460 143* 95.4 36.94 16 7100
150 1800 444TP 444VTDC6026 √ 2,100 460 174* 95.8 44.8 16 11800
200 1800 445TP 445VTDC6026 √ 2,240 460 227* 95.8 44.8 16 11600
250 1800 447TP 447VTDC6026 √ 2,700 460 287* 95.8 49.78 20 11300
IEC Motors
300 1800 449TP 449VTDC6026 √ 3,170 460 344* 95.8 49.78 20 13800
Contact Sales office for Pricing Note listing on inside back flap
* Amps at 460 Volts Specifications are subject to change without notice
DC Motors
133
Pump Motors
Vertical Hollow Shaft Coupling Kits
Motors
Pump
"DIM XF"
Washguard
A
Motors
A
"DIM XG"
WIDTH
DEPTH
"DIA BX"
"DIA BY"
TAPPED HOLES
Duty Motors
Agricultural
COUPLING KIT
Commonly KEYWAY
List referenced BX
Frame Item # Price Description Fig No. Dimension Width Depth
KIT 213/5CPL.751 219 COUPLING KIT, 213/5VTDC, 0.751" BX, BLANK 1 0.751 - -
210TP
HVAC / Fan
KIT 213/5CPL1.001 219 COUPLING KIT, 213/5VTDC, 1.001" BX 1 1.001 0.250 0.140
Motors
KIT 254/6CPL1.001B 219 COUPLING KIT, 254/6VTDC, 0.751" BX, BLANK 1 0.751 - -
250TP KIT 254/6CPL1.001 219 COUPLING KIT, 254/6VTDC, 1.001" BX 1 1.001 0.250 0.140
KIT 254/6CPL1.188 219 COUPLING KIT, 254/6VTDC, 1.188" BX 1 1.188 0.250 0.140
KIT 254/6CPL1.251 219 COUPLING KIT, 254/6VTDC, 1.251" BX 1 1.251 0.250 0.140
KIT 284/6CPL.751B 248 COUPLING KIT, 284/6VTDC, 0.751" BX, BLANK 1 0.751 - -
Special Voltage
280TP KIT 284/6CPL1.001 248 COUPLING KIT, 284/6VTDC, 1.001" BX 1 1.001 0.250 0.140
Motors
KIT 284/6CPL1.188 248 COUPLING KIT, 284/6VTDC, 1.188" BX 1 1.188 0.250 0.140
KIT 284/6CPL1.251 248 COUPLING KIT, 284/6VTDC, 1.251" BX 1 1.251 0.250 0.140
KIT 324-365CPL1.001B 572 COUPLING KIT, 324-365VTDC, 1.001" BX, BLANK 2 1.001 - -
KIT 324-365CPL1.001 572 COUPLING KIT, 324-365VTDC, 1.001" BX 2 1.001 0.250 0.140
KIT 324-365CPL1.188 572 COUPLING KIT, 324-365VTDC, 1.188" BX 2 1.188 0.250 0.140
Purpose Motors
320TP
360TP KIT 324-365CPL1.251A 572 COUPLING KIT, 324-365VTDC, 1.251" BX, 0.250" KEY WIDTH 2 1.251 0.250 0.140
Definite
KIT 324-365CPL1.251B 572 COUPLING KIT, 324-365VTDC, 1.251" BX, 0.375" KEY WIDTH 2 1.251 0.375 0.164
KIT 324-365CPL1.438 572 COUPLING KIT, 324-365VTDC, 1.438" BX 2 1.438 0.375 0.167
KIT 324-365CPL1.501 572 COUPLING KIT, 324-365VTDC, 1.501" BX 2 1.501 0.375 0.168
KIT 404/5CPL1.001B 819 COUPLING KIT, 404/5 VTDC, 1.001" BX, BLANK 2 1.001 - -
KIT 404/5CPL1.188 819 COUPLING KIT, 404/5 VTDC, 1.188" BX 2 1.188 0.250 0.140
KIT 404/5CPL1.251 819 COUPLING KIT, 404/5 VTDC, 1.251" BX 2 1.251 0.375 0.140
Brake Motors
400TP KIT 404/5CPL1.438 819 COUPLING KIT, 404/5 VTDC, 1.438" BX 2 1.438 0.375 0.140
KIT 404/5CPL1.501 819 COUPLING KIT, 404/5 VTDC, 1.501" BX 2 1.501 0.375 0.140
KIT 404/5CPL1.688 819 COUPLING KIT, 404/5 VTDC, 1.688" BX 2 1.688 0.375 0.203
KIT 404/5CPL1.751 819 COUPLING KIT, 404/5 VTDC, 1.751" BX 2 1.751 0.375 0.203
KIT 444/5CPL1.188B 895 COUPLING KIT, 404/5 VTDC, 1.188" BX, BLANK 2 1.188 - -
KIT 444/5CPL1.188 895 COUPLING KIT, 404/5 VTDC, 1.188" BX 2 1.188 0.250 0.116
IEC Motors
440TP KIT 444/5CPL1.501 895 COUPLING KIT, 404/5 VTDC, 1.501" BX 2 1.501 0.375 0.168
KIT 444/5CPL1.688 895 COUPLING KIT, 404/5 VTDC, 1.688" BX 2 1.688 0.375 0.171
KIT 444/5CPL1.751 895 COUPLING KIT, 404/5 VTDC, 1.751" BX 2 1.751 0.375 0.171
KIT 444/5CPL1.938 895 COUPLING KIT, 404/5 VTDC, 1.938" BX 2 1.938 0.500 0.222
KIT 447/9CPL1.501B 1.034 COUPLING KIT, 447/9 VTDC, 1.501" BX, BLANK 2 1.501 - -
KIT 447/9CPL1.501 1.034 COUPLING KIT, 447/9 VTDC, 1.501" BX 2 1.501 0.375 0.168
447TP KIT 447/9CPL1.688 1.034 COUPLING KIT, 447/9 VTDC, 1.688" BX 2 1.688 0.375 0.171
DC Motors
449TP
KIT 447/9CPL1.938 1.034 COUPLING KIT, 447/9 VTDC, 1.938" BX 2 1.938 0.500 0.222
KIT 447/9CPL2.188 1.034 COUPLING KIT, 447/9 VTDC, 2.188" BX 2 2.188 0.500 0.226
KIT 447/9CPL2.251 1.034 COUPLING KIT, 447/9 VTDC, 2.251" BX 2 2.251 0.500 0.226
134
Pump Motors
Vertical Hollow Shaft Coupling Kits
Motors
Pump
FIGURE 2
"DIM XC"
"DIA BZ"
Washguard
"DIM XF"
Motors
A A
WIDTH
DEPTH
"DIA BX"
"DIA BY"
Duty Motors
TAPPED HOLES
Agricultural
COUPLING KIT
Bolt
Top Half
BY BZ XC XF XG Coupling Gib Key Part No. Torque (lb-ft) Spring Washer
433-12091-01 433-42346-19
- - - - - 434-42896-05
433-12091-02 (3*5/16""-18UNC) 17 3*7098470002
HVAC / Fan
10-32UNF 1.375 0.430 1.650 1.750 434-42896-04 433-12091-02 (1 3/4"" L)"
Motors
433-12091-01
- - - - - 434-42885-06
433-12091-02
433-42346-18
10-32UNF 1.375 0.430 1.650 1.750 434-42885-03 433-12091-02 (3*3/8""-16UNC) 30 3*7098500002
1/4-20UNC 1.750 0.430 1.650 1.750 434-42885-04 433-12091-02 (2 1/4"" L)"
1/4-20UNC 1.750 0.430 1.650 1.750 434-42885-05 433-12091-02
433-12091-01
- - - - - 434-42905-06
433-12091-02
Special Voltage
433-42346-18
10-32UNF 1.375 0.430 1.850 1.750 434-42905-03 433-12091-02 (3*3/8""-16UNC) 30 3*7098500002
Motors
1/4-20UNC 1.750 0.430 1.850 1.750 434-42905-04 433-12091-02 (2 1/4"" L)"
1/4-20UNC 1.750 0.430 1.850 1.750 434-42905-05 433-12091-02
433-12091-07
- - - - - 433-42793-10
433-12091-08
10-32UNF 1.375 0.320 1.610 - 433-42793-01 433-12091-07
1/4-20UNC 1.750 0.320 1.610 - 433-42793-05 433-12091-07 433-42346-23
Purpose Motors
1/4-20UNC 1.750 0.320 1.610 - 433-42793-02 433-12091-07 (6*1/2""-13UNC) 75 6*7098520002
(2 1/2"" L)"
Definite
1/4-20UNC 1.750 0.320 1.610 - 433-42793-06 433-12091-08
1/4-20UNC 2.120 0.320 1.610 - 433-42793-03 433-12091-08
1/4-20UNC 2.120 0.320 1.610 - 433-42793-04 433-12091-08
433-12091-04
- - - - - 433-44185-11
433-12091-09
1/4-20UNC 1.750 0.630 2.430 - 433-44185-01 433-12091-09
1/4-20UNC 1.750 0.630 2.430 - 433-44185-02 433-12091-04 433-42346-09
Brake Motors
1/4-20UNC 2.120 0.630 2.430 - 433-44185-03 433-12091-04 (6*5/8""-11UNC) 150 6*7098570002
(3"" L)"
1/4-20UNC 2.120 0.630 2.430 - 433-44185-04 433-12091-04
1/4-20UNC 2.500 0.630 2.430 - 433-44185-05 433-12091-04
1/4-20UNC 2.500 0.630 2.430 - 433-44185-06 433-12091-04
433-12091-04
- - - - - 433-42698-09
433-12091-09
1/4-20UNC 1.750 0.630 2.220 - 433-42698-02 433-12091-09
433-42346-09
IEC Motors
135
Pump Motors
Vertical Hollow Shaft Bushing kits
Motors
Pump
A A B B
Washguard
Motors
"DIM A"
Duty Motors
Agricultural
Commonly
referenced
Tolerance
Tolerance
Nominal
Nominal
Frame List Upper Torque
Size Item # Price Description Lower Limit Part No. (in-lbs)
HVAC / Fan
Motors
KIT 213-256BSH1.000 271 BUSHING KIT, 213/254VTDC, 1.000" BX 1.00 1.003/1.001 2*434-43270-04 (3/4"L) 26~33.5
210TP KIT 213-256BSH.937 271 BUSHING KIT, 213/254VTDC, .937" BX 0.937 0.940/0.938 2*434-43270-04 (3/4"L) 26~33.5
250TP KIT 213-256BSH.875 271 BUSHING KIT, 213/254VTDC, .875" BX 0.875 0.878/0.876 2*434-43270-04 (3/4"L) 26~33.5
1.76 0.001 1.76 -0.0005
KIT 213-256BSH.750 271 BUSHING KIT, 213/254VTDC, .750" BX 0.750 0.753/0.751 2*434-43270-04 (3/4"L) 26~33.5
KIT 254/256BSH1.250 271 BUSHING KIT, 254/6VTDC, 1.250" BX 1.25 1.253/1.251 2*434-43270-02 (1/2"L) 26~33.5
250TP
KIT 254/256BSH1.187 271 BUSHING KIT, 254/5VTDC, 1.187" BX 1.187 1.190/1.188 2*434-43270-02 (1/2"L) 26~33.5
KIT 284/6BSH1.250 315 BUSHING KIT, 284/6VTDC, 1.250" BX 1.25 1.253/1.251 2*434-43270-04 (3/4"L) 26~33.5
Special Voltage
KIT 284/6BSH1.187 315 BUSHING KIT, 284/6VTDC 1.187" BX 1.187 1.190/1.188 2*434-43270-04 (3/4"L) 26~33.5
Motors
280TP KIT 284/6BSH1.000 315 BUSHING KIT, 284/6VTDC 1.000" BX 1.00 1.003/1.001 2.165 0.001 2.165 -0.0005 2*434-43270-04 (3/4"L) 26~33.5
KIT 284/6BSH.875 315 BUSHING KIT, 284/6VTDC .875" BX 0.875 0.878/0.876 2*434-43270-04 (3/4"L) 26~33.5
KIT 284/6BSH.750 315 BUSHING KIT, 284/6VTDC .750" BX 0.750 0.753/0.751 2*434-43270-04 (3/4"L) 26~33.5
KIT 324/6BSH1.500 347 BUSHING KIT, 324/6VTDC, 1.500" BX 1.50 1.502/1.501 2*434-43270-04 (3/4"L) 26~33.5
KIT 324/6BSH1.437 347 BUSHING KIT, 324/6VTDC, 1.437" BX 1.437 1.439/1.438 2*434-43270-04 (3/4"L) 26~33.5
KIT 324/6BSH1.250 347 BUSHING KIT, 324/6VTDC, 1.250" BX 1.25 1.252/1.251 2*434-43270-04 (3/4"L) 26~33.5
320TP 2.362 0.001 2.362 -0.0005
Purpose Motors
KIT 324/6BSH1.187 347 BUSHING KIT, 324/6VTDC, 1.187" BX 1.187 1.189/1.188 2*434-43270-04 (3/4"L) 26~33.5
KIT 324/6BSH1.126 347 BUSHING KIT, 324/6VTDC, 1.126" BX 1.126 1.127/1.126 2*434-43270-04 (3/4"L) 26~33.5
Definite
KIT 324/6BSH1.000 347 BUSHING KIT, 324/6VTDC, 1.000" BX 1.00 1.002/1.001 2*434-43270-04 (3/4"L) 26~33.5
KIT 364/5BSH1.500 381 BUSHING KIT, 364/5VTDC, 1.500" BX 1.50 1.502/1.501 2*434-43270-04 (3/4"L) 26~33.5
KIT 364/5BSH1.437 381 BUSHING KIT, 364/5VTDC, 1.437" BX 1.437 1.439/1.438 2*434-43270-04 (3/4"L) 26~33.5
KIT 364/5BSH1.250 381 BUSHING KIT, 364/5VTDC, 1.250" BX 1.25 1.252/1.251 2*434-43270-04 (3/4"L) 26~33.5
360TP 2.559 0.001 2.559 -0.0005
KIT 364/5BSH1.187 381 BUSHING KIT, 364/5VTDC, 1.187" BX 1.187 1.189/1.188 2*434-43270-04 (3/4"L) 26~33.5
KIT 364/5BSH1.126 381 BUSHING KIT, 364/5VTDC, 1.126" BX 1.126 1.127/1.126 2*434-43270-04 (3/4"L) 26~33.5
Brake Motors
KIT 364/5BSH1.000 381 BUSHING KIT, 364/5VTDC, 1.000" BX 1.00 1.002/1.001 2*434-43270-04 (3/4"L) 26~33.5
KIT 404-445BSH1.750 400 BUSHING KIT,404/445VTDC, 1.750" BX 1.75 1.752/1.751 2*434-43270-04 (3/4"L) 26~33.5
KIT 404-445BSH1.687 400 BUSHING KIT,404/445VTDC, 1.687" BX 1.687 1.689/1.688 2*434-43270-04 (3/4"L) 26~33.5
KIT 404-445BSH1.500 400 BUSHING KIT,404/445VTDC, 1.500" BX 1.50 1.502/1.501 2*434-43270-04 (3/4"L) 26~33.5
400TP
KIT 404-445BSH1.437 400 BUSHING KIT,404/445VTDC, 1.437" BX 1.437 1.439/1.438 2.638 0.001 2.638 -0.0005 2*434-43270-04 (3/4"L) 26~33.5
440TP
KIT 404-445BSH1.250 400 BUSHING KIT,404/445VTDC, 1.250" BX 1.25 1.252/1.251 2*434-43270-04 (3/4"L) 26~33.5
KIT 404-445BSH1.187 400 BUSHING KIT,404/445VTDC, 1.187" BX 1.187 1.189/1.188 2*434-43270-04 (3/4"L) 26~33.5
KIT 404-445BSH1.000 400 BUSHING KIT,404/445VTDC, 1.000" BX 1.00 1.002/1.001 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH2.500 595 BUSHING KIT,447/9VTDC, 2.500" BX 2.5 2.502/2.501 2*434-43270-04 (3/4"L) 26~33.5
IEC Motors
KIT 447/9BSH2.437 271 BUSHING KIT,447/9VTDC, 2.437" BX 2.437 2.439/2.438 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH2.375 595 BUSHING KIT,447/9VTDC, 2.375" BX 2.375 2.377/2.376 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH2.250 595 BUSHING KIT,447/9VTDC, 2.250" BX 2.25 2.252/2.251 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH2.187 595 BUSHING KIT,447/9VTDC, 2.187" BX 2.187 2.189/2.188 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH2.125 595 BUSHING KIT,447/9VTDC, 2.125" BX 2.125 2.127/2.126 2*434-43270-04 (3/4"L) 26~33.5
447TP
KIT 447/9BSH2.062 595 BUSHING KIT,447/9VTDC, 2.062" BX 2.062 2.064/2.063 3.425 0.001 3.425 -0.0005 2*434-43270-04 (3/4"L) 26~33.5
449TP
KIT 447/9BSH2.000 595 BUSHING KIT,447/9VTDC, 2.000" BX 2 2.002/2.001 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH1.937 595 BUSHING KIT,447/9VTDC, 1.937" BX 1.937 1.939/1.938 2*434-43270-04 (3/4"L) 26~33.5
DC Motors
KIT 447/9BSH1.750 595 BUSHING KIT,447/9VTDC, 1.750" BX 1.75 1.752/1.751 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH1.687 595 BUSHING KIT,447/9VTDC, 1.687" BX 1.687 1.689/1.688 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH1.500 595 BUSHING KIT,447/9VTDC, 1.500" BX 1.50 1.502/1.501 2*434-43270-04 (3/4"L) 26~33.5
KIT 447/9BSH1.437 595 BUSHING KIT,447/9VTDC, 1.437" BX 1.437 1.439/1.438 2*434-43270-04 (3/4"L) 26~33.5
136
Pump Motors
P-Base Kit
Motors
Pump
“DIM BE” “DIM BC”
Washguard
Motors
“DIM AK”
“DIM AJ”
“DIM BD”
Duty Motors
Agricultural
FRAME NO. Item # List Price Description AK BD BB BE AJ
HVAC / Fan
Motors
KIT 210VTPDC10 425 P-BASE KIT, 213/5VTDC, 10" BD 8.250-8.253 10 0.25 0.75 9.125
213/5
KIT 210VTPDC12 425 P-BASE KIT, 213/5VTDC, 12" BD 8.250-8.253 12 0.25 0.75 9.125
KIT 250VTPDC10 527 P-BASE KIT, 254/6VTDC, 10" BD 8.250-8.253 10 0.27 0.98 9.125
254/6 KIT 250VTPDC12 527 P-BASE KIT, 254/6VTDC, 12" BD 8.250-8.253 12 0.27 0.98 9.125
KIT 250VTPDC16 639 P-BASE KIT, 254/6VTDC, 16" BD 8.250-8.253 16.5 0.27 0.98 9.125
KIT 280VTPDC10 800 P-BASE KIT, 284/6VTDC, 10" BD 8.250-8.253 10 0.27 0.98 9.125
284/6 KIT 280VTPDC12 800 P-BASE KIT, 284/6VTDC, 12" BD 8.250-8.253 12 0.27 0.98 9.125
Special Voltage
KIT 280VTPDC16 858 P-BASE KIT, 284/6VTDC, 16" BD 13.500-13.505 16.5 0.27 0.98 14.75
Motors
KIT 320VTPDC12 923 P-BASE KIT, 324/6VTDC, 12" BD 8.250-8.253 12 0.27 0.98 9.125
324/6
KIT 320VTPDC16 923 P-BASE KIT, 324/6VTDC, 16" BD 13.500-13.505 16.5 0.27 0.98 14.75
KIT 360VTPDC12 1.327 P-BASE KIT, 364/6VTDC, 12" BD 8.250-8.253 12 0.27 0.98 9.125
364/5
KIT 360VTPDC16 1.327 P-BASE KIT, 364/5VTDC, 16" BD 13.500-13.505 16.5 0.27 0.98 14.75
KIT 400VTPDC16 1.418 P-BASE KIT, 404/5VTDC, 16" BD 13.500-13.505 16.5 0.27 0.98 14.75
404/5
KIT 400VTPDC20 1.418 P-BASE KIT, 404/5VTDC, 20" BD 13.500-13.505 20 0.27 0.98 14.75
Purpose Motors
KIT 444/5VTPDC16 2.655 P-BASE KIT, 444/5VTDC, 16" BD 13.500-13.505 16.5 0.27 1.16 14.75
444/5 KIT 444/5VTPDC20 2.655 P-BASE KIT, 444/5VTDC, 20" BD 13.500-13.505 20 0.27 1.16 14.75
Definite
KIT 444/5VTPDC24 2.919 P-BASE KIT, 444/5VTDC, 24" BD 13.500-13.505 24 0.27 1.16 14.75
KIT 447/9VTPDC16 3.026 P-BASE KIT, 447/9VTDC, 16" BD 13.500-13.505 16.5 0.27 1.16 14.75
447/9 KIT 447/9VTPDC20 3.764 P-BASE KIT, 447/9VTDC, 20" BD 13.500-13.505 20 0.27 1.16 14.75
KIT 447/9VTPDC24 3.925 P-BASE KIT, 447/9VTDC, 24" BD 13.500-13.505 24 0.27 1.16 14.75
Brake Motors
IEC Motors
DC Motors
137
Pump Motors
Lincoln Motors™ Fire Pump Motors - Drip-Proof - Rigid Base
Motors
Pump
Features:
• 250 frame rolled steel construction
• 280 frame and larger - cast iron construction
Washguard
• Ball bearings
Motors
25 1800 284T LM80261 √ 2,541 SD4P25T61YAP21AP5 320 230/460 61 91.7 1.15 25.71 S, CN
Motors
30 3600 284TS LM80107 C/A 3,254 CCD2P30TS62YAP5 318 200/400 83 91.0 1.15 22.06 C, US
30 3600 284TS LM80108 C/A 3,254 CCD2P30TS61YAP5 318 230/460 72 91.0 1.15 22.06 C, US
30 3600 284TS LM80262 √ 2,533 SD2P30TS61YAP21AP5 315 230/460 72 91.0 1.15 24.34 S, CN
30 1800 286T LM80109 C/A 3,580 CCD4P30T62YAP5 364 200/400 83 92.4 1.15 23.56 C, US
30 1800 286T LM80110 C/A 3,580 CCD4P30T61YAP5 364 230/460 72 92.4 1.15 23.49 C, US
30 1800 286T LM80263 √ 2,772 SD4P30T61YAP21AP5 362 230/460 72 92.4 1.15 27.09 S, CN
Purpose Motors
40 3600 286TS LM80111 C/A 3,630 CCD2P40TS62YAP5 360 200/400 123 91.7 1.15 23.64 C, US
Definite
40 3600 286TS LM80112 C/A 3,630 CCD2P40TS61YAP5 360 230/460 107 91.7 1.15 23.56 C, US
40 3600 286TS LM80264 √ 2,778 SD2P40TS61YAP21AP5 362 230/460 94 91.7 1.15 25.72 S, CN
40 1800 324TS LM80113 C/A 4,028 CCD4P40TS62YAP5 465 200/400 127 93.0 1.15 24.50 C, US
40 1800 324TS LM80114 C/A 4,028 CCD4P40TS61YAP5 465 230/460 97 93.0 1.15 24.50 C, US
40 1800 324T LM80115 C/A 4,028 CCD4P40T62YAP5 465 200/400 112 93.0 1.15 26.00 C, US
40 1800 324T LM80116 C/A 4,028 CCD4P40T61YAP5 465 230/460 97 93.0 1.15 26.00 C, US
Brake Motors
40 1800 324T LM80265 √ 3,916 CCD4P40T61YAP21AP5 549 230/460 94 93.0 1.15 28.55 C, CN
50 3600 324TS LM80117 C/A 3,842 CCD2P50TS62YAP5 415 200/400 135 92.4 1.15 24..50 C, US
50 3600 324TS LM80118 C/A 3,842 CCD2P50TS61YAP5 415 230/460 117 92.4 1.15 24.50 C, US
50 3600 324TS LM80266 √ 3,622 CCD2P50TS61YAP21AP5 556 230/460 114 92.4 1.15 27.05 C, CN
50 1800 326TS LM80119 C/A 4,293 CCD4P50TS62YAP5 515 200/400 142 93.0 1.15 26.00 C, US
50 1800 326TS LM80120 C/A 4,293 CCD4P50TS61YAP5 515 230/460 123 93.0 1.15 26.00 C, US
50 1800 326T LM80121 C/A 4,293 CCD4P50T62YAP5 515 200/400 161 93.0 1.15 26.00 C, US
50 1800 326T LM80122 C/A 4,293 CCD4P50T61YAP5 515 230/460 123 93.0 1.15 27.50 C, US
IEC Motors
50 1800 326T LM80267 √ 4,208 CCD4P50T61YAP21AP5 591 230/460 120 93.6 1.15 29.73 C, CN
60 3600 326TS LM80123 C/A 4,280 CCD2P60TS62YAP5 340 200/400 155 93.0 1.15 26.00 C, US
60 3600 326TS LM80124 C/A 4,280 CCD2P60TS61YAP5 340 230/460 135 93.0 1.15 26.00 C, US
60 3600 326TS LM80268 √ 3,939 CCD2P60TS61YAP21AP5 679 230/460 136 93.0 1.15 28.23 C, CN
60 1800 364TS LM80125 C/A 8,113 CCD4P60TS62YAP5 805 200/400 166 93.6 1.15 26.50 C, US
60 1800 364TS LM80126 C/A 8,120 CCD4P60TS61YAP5 805 230/460 144 93.6 1.15 26.50 C, US
60 1800 364TS LM80269 √ 4,777 CCD4P60TS61YAP21AP5 1200 230/460 138 93.6 1.15 29.57 C, CN
DC Motors
60 1800 364T LM80127 C/A 8,120 CCD4P60T62YAP5 805 200/400 166 93.6 1.15 28.62 C, US
60 1800 364T LM80128 C/A 8,120 CCD4P60T61YAP5 805 230/460 144 93.6 1.15 28.62 C, US
Continued On Next Page
Shaded model numbers are cast iron frame
* Full load amps at lowest listed voltage Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Motors
Pump
Three Phase - Drip-Proof - Rigid Base
SYN App. “C”
Stock
RPM NEMA Catalog List Wgt. *F. L. % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Amps EFF. Factor (Inches) Notes
75 3600 364TS LM80129 C/A 7,931 CCD2P75TS62YAP5 950 200/400 211 93.0 1.15 26.50 C, US
Washguard
75 3600 364TS LM80130 √ 8,431 CCD2P75TS61YAP5 950 230/460 183 93.0 1.15 26.50 C, US
Motors
75 3600 364TS LM80270 √ 4,633 CCD2P75TS61YAP21AP5 1200 230/460 170 93.0 1.15 29.57 C, CN
75 1800 365TS LM80131 C/A 8,451 CCD4P75TS62YAP5 766 200/400 204 94.1 1.15 27.50 C, US
75 1800 365TS LM80132 C/A 8,451 CCD4P75TS61YAP5 766 230/460 177 94.1 1.15 27.50 C, US
75 1800 365TS LM80271 √ 5,446 CCD4P75TS61YAP21AP5 930 230/460 170 94.1 1.15 31.14 C, CN
75 1800 365T LM80133 C/A 8,451 CCD4P75T62YAP5 766 200/400 204 94.1 1.15 29.62 C, US
75 1800 365T LM80134 √ 8,451 CCD4P75T61YAP5 766 230/460 177 94.1 1.15 29.62 C, US
100 3600 365TS LM80135 C/A 8,255 CCD2P100TS62YAP5 730 200/400 276 93.0 1.15 27.50 C, US
Duty Motors
100 3600 365TS LM80136 C/A 8,255 CCD2P100TS61YAP5 730 230/460 240 93.0 1.15 27.50 C, US
Agricultural
100 3600 365TS LM80272 √ 5,068 CCD2P100TS61YAP21AP5 930 230/460 228 93.0 1.15 31.14 C, CN
100 1800 404TS LM80137 C/A 10,389 CCD4P100TS62YAP5 1065 200/400 267 94.1 1.15 29.50 C, US
100 1800 404TS LM80138 C/A 10,389 CCD4P100TS61YAP5 1065 230/460 236 94.1 1.15 29.50 C, US
100 1800 404TS LM80273 √ 6,855 CCD4P100TS61YAP21AP5 1151 230/460 228 94.1 1.15 33.86 C, CN
100 1800 404T LM80139 C/A 10,389 CCD4P100T62YAP5 1065 200/400 271 94.1 1.15 32.50 C, US
100 1800 404T LM80140 √ 10,389 CCD4P100T61YAP5 1065 230/460 236 94.1 1.15 32.50 C, US
125 3600 404TS LM80141 C/A 9,838 CCD2P125TS62YAP5 949 200/400 327 93.6 1.15 29.50 C, US
125 3600 404TS LM80142 √ 9,838 CCD2P125TS61YAP5 949 230/460 284 93.6 1.15 29.50 C, US
HVAC / Fan
125 3600 404TS LM80238 √ 6,121 CCD2P125TS61YAP21AP5 1151 460 139 93.6 1.15 33.86 C, CN
Motors
125 1800 405TS LM80143 C/A 11,111 CCD4P125TS62YAP5 1070 200/400 327 94.5 1.15 29.50 C, US
125 1800 405TS LM80144 C/A 11,111 CCD4P125TS61YAP5 1088 230/460 288 94.5 1.15 31.00 C, US
125 1800 405TS LM80239 √ 7,561 CCD4P125TS61YAP21AP5 1240 460 142 94.5 1.15 35.44 C, CN
125 1800 405T LM80145 C/A 11,111 CCD4P125T62YAP5 1070 200/400 331 94.5 1.15 34.00 C, US
125 1800 405T LM80146 √ 11,111 CCD4P125T61YAP5 1070 230/460 288 94.5 1.15 34.00 C, US
150 3600 405TS LM80147 C/A 10,140 CCD2P150TS6011PYAP5 983 400 194 93.6 1.15 31.00 C, US
150 3600 405TS LM80148 √ 10,140 CCD2P150TS64PYAP5 983 460 169 93.6 1.15 31.00 C, US
Special Voltage
150 3600 405TS LM80240 √ 6,552 CCD2P150TS64PYAP21AP5 1240 460 168 93.6 1.15 35.44 C, CN
Motors
150 1800 444TS LM80149 C/A 12,988 CCD4P150TS6011PYAP5 1265 400 199 95.0 1.15 34.00 C, US
150 1800 444TS LM80150 C/A 12,988 CCD4P150TS64PYAP5 1265 460 173 95.0 1.15 34.00 C, US
150 1800 444TS LM80241 √ 12,561 CCD4P150TS64PYAP21AP5 1880 460 170 95.0 1.15 40.83 C, CN
150 1800 444T LM80151 C/A 12,988 CCD4P150T6011PYAP5 1265 400 199 95.0 1.15 37.75 C, US
150 1800 444T LM80152 √ 12,988 CCD4P150T64PYAP5 1265 460 173 95.0 1.15 37.75 C, US
200 3600 444TS LM80153 C/A 13,126 CCD2P200TS6011PYAP5 1315 400 259 94.5 1.15 34.00 C, US
200 3600 444TS LM80154 √ 13,126 CCD2P200TS64PYAP5 1315 460 225 94.5 1.15 34.00 C, US
Purpose Motors
200 3600 444TS LM80242 √ 11,644 CCD2P200TS64PYAP21AP5 1880 460 220 94.5 1.15 40.83 C, CN
Definite
200 1800 445TS LM80155 C/A 13,953 CCD4P200TS6011PYAP5 1412 400 268 95.0 1.15 36.00 C, US
200 1800 445TS LM80156 C/A 13,953 CCD4P200TS64PYAP5 1412 460 233 95.0 1.15 36.00 C, US
200 1800 445TS LM80243 √ 14,051 CCD4P200TS64PYAP21AP5 2004 460 225 95.4 1.15 40.83 C, CN
200 1800 445T LM80157 C/A 13,953 CCD4P200T6011PYAP5 1412 400 268 95.0 1.15 39.75 C, US
200 1800 445T LM80158 √ 13,953 CCD4P200T64PYAP5 1412 460 233 95.0 1.15 39.75 C, US
250 3600 445TS LM80159 C/A 14,025 CCD2P250TS6011PYAP5 1387 400 321 94.5 1.15 36.00 C, US
250 3600 445TS LM80160 C/A 14,025 CCD2P250TS64PYAP5 1387 460 279 94.5 1.15 36.00 C, US
250 3600 445TS LM80244 √ 12,253 CCD2P250TS64PYAP21AP5 2004 460 272 94.5 1.15 40.83 C, CN
Brake Motors
250 1800 445TS LM80161 C/A 15,364 CCD4P250TS6011PYAP5 1428 400 328 95.4 1.15 36.00 C, US
250 1800 445TS LM80162 C/A 15,364 CCD4P250TS64PYAP5 1428 460 285 95.4 1.15 36.00 C, US
250 1800 445TS LM80245 √ 14,690 CCD4P250TS64PYAP21AP5 2004 460 278 95.5 1.15 45.95 C, CN
250 1800 445T LM80163 C/A 15,364 CCD4P250T6011PYAP5 1428 400 328 95.4 1.15 39.75 C, US
250 1800 445T LM80164 √ 15,364 CCD4P250T64PYAP5 1428 460 285 95.4 1.15 39.75 C, US
300 3600 447TS LM80165 C/A 18,819 CCD2P300TS6011PYAP5 2255 400 382 95.0 1.15 39.50 C, US
300 3600 447TS LM80166 √ 18,819 CCD2P300TS64PYAP5 2255 460 332 95.0 1.15 39.50 C, US
300 1800 447TS LM80167 C/A 19,777 CCD4P300TS6011PYAP5 1952 400 397 95.4 1.15 39.50 C, US
300 1800 447TS LM80168 C/A 19,777 CCD4P300TS64PYAP5 1952 460 345 95.4 1.15 39.50 C, US
IEC Motors
300 1800 447T LM80169 C/A 19,777 CCD4P300T6011PYAP5 1952 400 397 95.4 1.15 43.25 C, US
300 1800 447T LM80170 √ 19,777 CCD4P300T64PYAP5 1952 460 345 95.4 1.15 43.25 C, US
350 3600 447TS LM80171 C/A 19,606 CCD2P350TS6011PYAP5 2068 400 443 95.0 1.15 39.50 C, US
350 3600 447TS LM80172 √ 19,606 CCD2P350TS64PYAP5 2068 460 385 95.0 1.15 39.50 C, US
350 1800 447TS LM80173 C/A 19,730 CCD4P350TS6011PYAP5 1950 400 466 95.4 1.15 39.50 C, US
350 1800 447TS LM80174 C/A 19,730 CCD4P350TS64PYAP5 1950 460 405 95.4 1.15 39.50 C, US
350 1800 447T LM80175 C/A 19,730 CCD4P350T6011PYAP5 1950 400 466 95.4 1.15 43.25 C, US
350 1800 447T LM80176 √ 19,730 CCD4P350T64PYAP5 1950 460 405 95.4 1.15 43.25 C, US
DC Motors
400 1800 447TS LM80178 √ 22,077 CCD4P400TS64PYAP5 2214 460 450 95.4 1.15 39.50 C, US
450 1800 449TS LM80180 √ 29,292 CCD4P450TS64PYAP5 2675 460 505 95.8 1.15 44.50 C, US
500 1800 449TS LM80182 √ 31,977 CCD4P500TS64PYAP5 2695 460 560 95.8 1.15 44.50 C, US
* Full load amps at lowest listed voltage Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
139
Pump Motors
Lincoln Motors™ Fire Pump Motors - TEFC - Rigid Base
Motors
Pump
Features:
• Ball bearings
• NEMA® design B, code G
• 230/460 and 460 volt motors rated for 50HZ at next lower HP,
Washguard
Motors
5 1800 184T LM80056 C/A 1,352 CCF4P5T62AP5 123 200/400 15.0 87.5 1.15 15.87 C, US
Motors
5 1800 184T LM80057 C/A 1,352 CCF4P5T61AP5 123 230/460 13.0 87.5 1.15 15.87 C, US
7 1/2 3600 213T LM80058 C/A 1,831 CCF2P7.5T62AP5 188 200/400 21.9 88.5 1.15 18.20 C, US
7 1/2 3600 213T LM80059 C/A 1,831 CCF2P7.5T61AP5 188 230/460 19.0 88.5 1.15 18.20 C, US
7 1/2 1800 213T LM80060 C/A 1,801 CCF4P7.5T62AP5 194 200/400 23.0 89.5 1.15 18.20 C, US
7 1/2 1800 213T LM80061 C/A 1,801 CCF4P7.5T61AP5 194 230/460 20.0 89.5 1.15 19.63 C, US
10 3600 215T LM80062 C/A 1,939 CCF2P10T62AP5 217 200/400 27.6 89.5 1.15 19.63 C, US
Purpose Motors
10 3600 215T LM80063 C/A 1,939 CCF2P10T61AP5 217 230/460 24.0 90.2 1.15 22.63 C, US
Definite
10 1800 215T LM80064 C/A 2,005 CCF4P10T62AP5 227 200/400 28.8 89.5 1.15 22.63 C, US
10 1800 215T LM80065 √ 2,005 CCF4P10T61AP5 227 230/460 25.0 89.5 1.15 22.63 C, US
15 3600 254T LM80066 C/A 2,733 CCF2P15T62AP5 370 200/400 — 90.2 1.15 — C, US
15 3600 254T LM80067 C/A 2,733 CCF2P15T61AP5 370 230/460 35.0 90.2 1.15 23.69 C, US
15 1800 254T LM80068 C/A 2,620 CCF4P15T62AP5 365 200/400 — 91.0 1.15 — C, US
15 1800 254T LM80069 C/A 2,620 CCF4P15T61AP5 365 230/460 39.0 91.0 1.15 23.52 C, US
20 3600 256T LM80070 C/A 3,301 CCF2P20T62AP5 334 200/400 — 90.2 1.15 — C, US
Brake Motors
20 3600 256T LM80071 C/A 3,301 CCF2P20T61AP5 334 230/460 46.5 90.2 1.15 25.27 C, US
20 1800 256T LM80072 C/A 2,812 CCF4P20T62AP5 420 200/400 57.5 91.0 1.15 25.27 C, US
20 1800 256T LM80073 C/A 2,812 CCF4P20T61AP5 420 230/460 50.0 91.0 1.15 25.27 C, US
25 3600 284TS LM80074 C/A 4,271 CCF2P25TS62YAP5 384 200/400 — 91.0 1.15 — C, US
25 3600 284TS LM80075 C/A 4,271 CCF2P25TS61YAP5 384 230/460 59.0 91.0 1.15 24.89 C, US
25 1800 284T LM80076 C/A 3,413 CCF4P25T62YAP5 440 200/400 — 92.4 1.15 — C, US
25 1800 284T LM80077 C/A 3,413 CCF4P25T61YAP5 440 230/460 61.0 92.4 1.15 26.27 C, US
IEC Motors
30 3600 286TS LM80078 C/A 5,069 CCF2P30TS62YAP5 428 200/400 — 91.0 1.15 — C, US
30 3600 286TS LM80079 C/A 5,069 CCF2P30TS61YAP5 428 208-230/460 70.0 91.0 1.15 26.43 C, US
30 1800 286T LM80080 C/A 4,081 CCF4P30T62YAP5 494 200/400 — 92.4 1.15 — C, US
30 1800 286T LM80081 C/A 4,081 CCF4P30T61YAP5 494 208-230/460 72.0 92.4 1.15 27.84 C, US
Continued On Next Page
Shaded model numbers are cast iron frame
* Full load amps at lowest listed voltage Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
DC Motors
Motors
Pump
Three Phase - TEFC - Rigid Base
SYN App. “C”
Stock
RPM NEMA Catalog List Wgt. *F. L. % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Amps EFF. Factor (Inches) Notes
Washguard
Motors
40 3600 324TS LM80084 C/A 7,097 CCF2P40TS62YAP5 520 200/400 — 91.7 1.15 — C, US
40 3600 324TS LM80085 √ 7,097 CCF2P40TS61YAP5 520 208-230/460 92.0 91.7 1.15 27.47 C, US
40 1800 324TS LM80183 C/A 5,977 CCF4P40TS62YAP5 575 200/400 — 93.0 1.15 — C, US
40 1800 324TS LM80184 C/A 5,977 CCF4P40TS61YAP5 575 208-230/460 100.0 93.0 1.15 27.47 C, US
40 1800 324T LM80027 C/A 5,977 CCF4P40T62YAP5 575 200/400 — 93.0 1.15 — C, US
40 1800 324T LM80086 √ 5,977 CCF4P40T61YAP5 575 208-230/460 100.0 93.0 1.15 28.97 C, US
50 3600 326TS LM80028 C/A 8,287 CCF2P50TS62YAP5 540 200/400 — 93.0 1.15 — C, US
50 3600 326TS LM80087 C/A 8,287 CCF2P50TS61YAP5 540 208-230/460 112.0 93.0 1.15 28.97 C, US
Duty Motors
Agricultural
50 1800 326TS LM80186 C/A 6,712 CCF4P50TS62YAP5 675 200/400 — 93.6 1.15 — C, US
50 1800 326TS LM80187 C/A 6,712 CCF4P50TS61YAP5 675 208-230/460 122.0 93.6 1.15 28.87 C, US
50 1800 326T LM80029 C/A 6,712 CCF4P50T62YAP5 675 200/400 140.0 93.6 1.15 30.37 C, US
50 1800 326T LM80088 C/A 6,712 CCF4P50T61YAP5 675 208-230/460 122.0 93.6 1.15 31.87 C, US
60 3600 364TS LM80030 C/A 9,985 CCF2P60TS62YAP5 875 200/400 — 93.0 1.15 — C, US
60 3600 364TS LM80089 √ 9,985 CCF2P60TS61YAP5 875 208-230/460 138.0 93.0 1.15 29.38 C, US
60 1800 364TS LM80188 C/A 9,254 CCF4P60TS62YAP5 975 200/400 — 93.6 1.15 — C, US
60 1800 364TS LM80185 C/A 9,254 CCF4P60TS61YAP5 975 208-230/460 142.0 93.6 1.15 29.38 C, US
HVAC / Fan
60 1800 364T LM80031 C/A 9,254 CCF4P60T62YAP5 975 200/400 — 93.6 1.15 — C, US
Motors
60 1800 364T LM80090 √ 9,254 CCF4P60T61YAP5 975 208-230/460 142.0 93.6 1.15 31.50 C, US
75 3600 365TS LM80032 C/A 11,894 CCF2P75TS62YAP5 1000 200/400 — 93.6 1.15 — C, US
75 3600 365TS LM80091 √ 11,894 CCF2P75TS61YAP5 1000 208-230/460 172.0 93.6 1.15 30.38 C, US
75 1800 365TS LM80189 C/A 11,671 CCF4P75TS62YAP5 1025 200/400 — 94.1 1.15 — C, US
75 1800 365TS LM80190 C/A 11,671 CCF4P75TS61YAP5 1025 208-230/460 176.0 94.1 1.15 30.38 C, US
75 1800 365T LM80033 C/A 11,671 CCF4P75T62YAP5 1025 200/400 — 94.1 1.15 — C, US
Special Voltage
75 1800 365T LM80092 √ 11,671 CCF4P75T61YAP5 1025 208-230/460 176.0 94.1 1.15 32.50 C, US
100 3600 405TS LM80034 C/A 16,270 CCF2P100TS62YAP5 1239 200/400 — 94.1 1.15 — C, US
Motors
100 3600 405TS LM80093 √ 16,270 CCF2P100TS61YAP5 1239 208-230/460 224.0 94.1 1.15 34.12 C, US
100 1800 405TS LM80191 C/A 14,102 CCF4P100TS62YAP5 1267 200/400 172.0 94.5 1.15 30.38 C, US
100 1800 405TS LM80192 C/A 14,102 CCF4P100TS61YAP5 1267 208-230/460 224.0 94.5 1.15 32.62 C, US
100 1800 405T LM80035 C/A 14,102 CCF4P100T62YAP5 1267 200/400 — 94.5 1.15 — C, US
100 1800 405T LM80094 C/A 14,102 CCF4P100T61YAP5 1267 208-230/460 224.0 94.5 1.15 37.12 C, US
125 3600 444TS LM80036 C/A 19,817 CCF2P125TS6011PYAP5 1750 400 — 94.5 1.15 — C, US
Purpose Motors
125 3600 444TS LM80095 √ 19,817 CCF2P125TS64PYAP5 1750 460 — 94.5 1.15 — C, US
125 1800 444TS LM80193 C/A 18,848 CCF4P125TS6011PYAP5 1805 400 167.0 94.5 1.15 39.60 C, US
Definite
125 1800 444TS LM80194 C/A 18,848 CCF4P125TS64PYAP5 1805 460 142.0 94.5 1.15 37.60 C, US
125 1800 444T LM80037 C/A 18,848 CCF4P125T6011PYAP5 1805 400 167.0 94.5 1.15 43.35 C, US
125 1800 444T LM80096 √ 18,848 CCF4P125T64PYAP5 1805 460 145.0 94.5 1.15 43.35 C, US
150 1800 445TS LM80195 C/A 21,861 CCF4P150TS6011PYAP5 2116 400 — 95.0 1.15 — C, US
150 1800 445TS LM80196 C/A 21,861 CCF4P150TS64PYAP5 2116 460 170.0 95.0 1.15 39.60 C, US
150 1800 445T LM80039 C/A 21,861 CCF4P150T6011PYAP5 2116 400 — 95.0 1.15 — C, US
150 1800 445T LM80098 √ 21,861 CCF4P150T64PYAP5 2116 460 170.0 95.0 1.15 43.35 C, US
Brake Motors
200 1800 445TS LM80197 C/A 27,036 CCF4P200TS6011PYAP5 2311 400 — 95.0 1.15 — C, US
200 1800 445TS LM80198 C/A 27,036 CCF4P200TS64PYAP5 2311 460 224.0 95.0 1.15 — C, US
200 1800 445T LM80041 C/A 27,036 CCF4P200T6011PYAP5 2311 400 — 95.0 1.15 — C, US
200 1800 445T LM80100 C/A 27,036 CCF4P200T64PYAP5 2311 460 224.0 95.0 1.15 43.35 C, US
250 1800 449TS LM80199 C/A 32,271 CC449F4P250TS6011PYAP5 2600 400 — 93.0 1.15 — C, US
250 1800 449TS LM80200 C/A 32,271 CC449F4P250TS64PYAP5 2600 460 290.0 95.0 1.15 48.09 C, US
250 1800 449T LM80043 C/A 32,271 CC449F4P250T6011PYAP5 2600 400 — 95.4 1.15 — C, US
250 1800 449T LM80102 √ 32,271 CC449F4P250T64PYAP5 2600 460 290.0 95.0 1.15 51.85 C, US
300 1800 449TS LM80201 C/A 33,741 CCF4P300TS6011PYAP5 3041 400 385.0 95.4 1.15 48.09 C, US
IEC Motors
300 1800 449TS LM80202 C/A 33,741 CCF4P300TS64PYAP5 3041 460 335.0 95.4 1.15 48.09 C, US
300 1800 449T LM80045 C/A 33,741 CCF4P300T6011PYAP5 3041 400 385.0 95.4 1.15 51.86 C, US
300 1800 449T LM80018 √ 33,741 CCF4P300T64PYAP5 3041 460 335.0 95.4 1.15 51.86 C, US
350 1800 449TS LM80203 C/A 34,943 CCF4P350TS6011PYAP5 3202 400 — 93.0 1.15 — C, US
350 1800 449TS LM80204 C/A 34,943 CCF4P350TS64PYAP5 3202 460 400.0 95.4 1.15 48.09 C, US
350 1800 449T LM80047 C/A 34,943 CCF4P350T6011PYAP5 3202 400 — 95.4 1.15 — C, US
350 1800 449T LM80020 C/A 34,943 CCF4P350T64PYAP5 3202 460 400.0 95.4 1.15 51.88 C, US
400 1800 5011L LM80049 C/A 72,491 CC5011F4P400L6011PYAP5 5500 400 — 95.8 1.15 — C, US
DC Motors
400 1800 449T LM80022t √ 72,491 CC5011F4P400L64PYAP5 5500 460 448.0 95.8 1.15 51.85 C, US
450 1800 5011L LM80082 C/A 74,520 CC5011F4P450L6011PYAP5 5500 400 — 95.8 1.15 — C, US
450 1800 5011L LM80083± √ 74,520 CC5011F4P450L64PYAP5 5500 460 495.0 96.2 1.15 70.94 C, US
Our highly engineered pump motor is equipped with a special patent pending regreasing
system and fl ange with interchangeable SAE pump pads and shaft bushings. The special flange
will adapt to SAE A to F pump pads. The motor shafts have a standard machined bore that will
adapt to a spline or internal keyway shaft extensions.
Washguard
Motors
Features:
• 0.50–350 Hp • Voltage
• 2 & 4 pole – 208–230/460V (48–210 frames)
• TEFC and XP1 enclosures – 230/460V (250–400 frame)
• Cast iron construction – 460V (3-leads only, 440 frame)
Duty Motors
Designed to meet
XP requirements
Interchangeable SAE
pump adapter
Brake Motors
Interchangeable spline
Socket head cap shaft bushing (key and
screw in shaft at fan retaining rings hold it
end of motor to allow in place, and enable
customer to line up removal)
grease fitting with
hole on top of bracket Drain hole to remove
without disconnecting any hydraulic fluid
DC Motors
142
Washguard® Motors
Motors
Pump
• USDA-approved white epoxy finish
Washguard
Winner
• Stainless steel motors
Motors
• Encapsulated stainless steel motors available
• NEMA® and IEC flange motors 2015
• Three phase, single phase and DC wash down duty motors
• AC and DC wash down gearmotors
• Rigid base and C face mount types
Duty Motors
Agricultural
• BISSC approved designs
• Double lip contact seals and v-ring seals used for shaft seals
• Encapsulated and premium efficient models
• Washdown brakemotors and pump motors available
• UL recognized and CSA certified
HVAC / Fan
Motors
Applications:
Designed to meet the demanding washdown conditions that you may find in food processing
plants, chemical processing, pharmaceutical plants and the beverage and brewing industries.
Special Voltage
Motors
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
epoxy finish
• Stainless steel shaft, conduit box
cover, nameplate, fan guard
Duty Motors
Washguard II Motors
Agricultural
orientations
Motors
ExtremeDuck Ultra
®
Fully encapsulated motors designed for
extreme washdown conditions
144
THE MOTORS THAT STAND UP TO WASHDOWN.
Motors
Pump
LEESON® WASHGUARD® MOTORS
FEATURES AT A GLANCE
WHITE SST STAINLESS EXTREME
Washguard
FEATURE DUCK
WASHGUARD II
DUCK DUCK DUCK® ULTRA
Motors
SEALING ADVANTAGES
Complete motor encapsulation n
Not needed
Motor breather plugs/drain plugs n n n n for total
Duty Motors
encapsulation
Agricultural
Shaft seals on both ends of TEFC motors n n n n n
HVAC / Fan
Motors
Color-coded leads n
Sealed bearings n n n n n
Special Voltage
360° rotatable conduit box n
Motors
Q-Car™ rotor cartridge change-out n n
CERTIFICATIONS
Nameplate permanently etched in frame n n n
Purpose Motors
CE mark on nameplate n n n n n
Definite
Insulation System and marked on nameplate n n n n n
(1 HP and higher)
IP Ratings IP55 IP55 IP55 IP56 IP69
UL, CSA listed n n n n n
BISCC approved n n
SPECIAL CONSIDERATIONS
Brake Motors
Pump motor designs n n
Brakemotor designs n n
DC motors available n n
145
Viton is believed to be the trademark of hemours Company,
and are not owned or controlled by Regal Beloit Corporation.
Motors Washguard® Motors
Pump
Contact seal and * Also excellent for applications requiring a motor that is “tropicalized”!
V-ring seal prevent
water from high
pressure washdown.
DC Motors
Motors
Pump
Single Phase - TEFC - Rigid Base -
Featuring Electronic Solid State Encapsulated Switch
Washguard
Motors
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Factor (Inches) Notes
1/2 1800 56 112431.00 √ 774 C6C17WB1 27 115/208-230 4.4 1.15 10.50 S, US
3/4 1800 56 112432.00 √ 911 C6C17WB2 34 115/208-230 5.4 1.15 11.25 S, US
1 1800 56 112626.00 √ 1043 C6C17WB3 36 115/208-230 6.4 1.15 11.75 S, US
Duty Motors
Agricultural
1 1800 143T 120589.00 √ 1043 C143C17WB1 37 115/208-230 6.4 1.15 12.43 S, US
1 1⁄2 1800 145T 120590.00 √ 1,328 C145C17WB1 50 115/208-230 9.5 1.15 13.43 S, US
2 1800 182T 131571.00 C/A 1,925 C182C17WB3 63 115/208-230 12.6 1.15 13.46 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
SYN App. F. L. “C”
Stock
Special Voltage
1/2 1800 56C 112527.00 √ 802 C6C17WK3 26 115/208-230 4.4 1.15 10.87 S, US
Motors
3/4 3600 56C 113582.00 √ 785 C6C34WK4 28 115/208-230 5.0 1.15 11.37 S, US
3/4 1800 56C 112528.00 √ 910 C6C17WK4 33 115/208-230 5.4 1.15 11.62 S, US
1 3600 56C 113583.00 √ 787 C6C34WK6 34 115/208-230 6.0 1.15 11.87 S, US
1 1800 56C 112529.00 √ 1,046 C6C17WK5 36 115/208-230 6.4 1.15 12.12 S, US
1 1/2 3600 56C 113584.00 √ 1,152 C6C34WK5 36 115/208-230 8.5 1.15 12.37 S, US
1 1/2 1800 56HC 113300.00 √ 1,332 C6C17WK6 45 115/208-230 9.5 1.15 13.37 S, US
Purpose Motors
2 3600 56HC 114637.00 √ 1,328 C6C34WK9 46 115/208-230 10.0 1.00 13.37 S, US
Definite
Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
Single Phase - TEFC - C Face Less Base -
Featuring Electronic Solid State Encapsulated Switch
SYN App. F. L. “C”
Stock
1/3 1800 56C 114311.00 √ 771 C6C17WC2 26 115/208-230 3.2 1.15 10.37 S, US
1/2 3600 56C 114312.00 √ 771 C6C34WC3 28 115/208-230 3.8 1.15 10.62 S, US
1/2 1800 56C 114313.00 √ 791 C6C17WC3 25 115/208-230 4.4 1.15 10.87 S, US
3/4 3600 56C 114314.00 √ 774 C6C34WC4 34 115/208-230 5.0 1.15 11.37 S, US
3/4 1800 56C 114315.00 √ 914 C6C17WC4 34 115/208-230 5.4 1.15 11.37 S, US
1 3600 56C 114316.00 √ 779 C6C34WC5 32 115/208-230 6.0 1.15 11.62 S, US
1 1800 56C 114317.00 √ 1,037 C6C17WC5 32 115/208-230 6.4 1.15 12.12 S, US
DC Motors
1 1/2 3600 56C 114318.00 √ 1,250 C6C34WC6 39 115/208-230 8.5 1.15 12.37 S, US
1 1/2 1800 56C 114319.00 √ 1,328 C6C17WC6 46 115/208-230 9.5 1.15 13.37 S, US
147
Washguard® Motors
White Epoxy Painted - Three Phase
Motors
Pump
Washguard
Motors
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/4 1800 56C 113649.00 √ 741 C6T17VC5 22 208-230/460 1.1 68.0 1.15 9.56 S, US, 12
1/3 3600 56C 116640.00 √ 765 C6T34VC16 19 208-230/460 1.1 77.0 1.15 10.06 S, US, 12
Duty Motors
Agricultural
1/3 1800 56C 113954.00 √ 787 C6T17VC6 22 208-230/460 1.3 72.0 1.15 9.56 S, US, 12
1/3 1800 56C 116642.00 √ 787 C6T17WC23 19 208-230/460 1.7 68.0 1.15 10.37 S, US, 13
1/2 3600 56C 116643.00 √ 790 C6T34VC17 22 208-230/460 1.6 82.5 1.15 10.56 S, US, 12
1/2 1800 56C 113473.00 √ 811 C6T17VC4 25 208-230/460 1.8 78.5 1.15 10.06 S, US, 12
1/2 1800 56C 116644.00 √ 811 C6T17WC24 23 208-230/460 2.0 74.0 1.15 10.87 S, US, 13
3/4 3600 56C 113022.00 √ 822 C6T34VC1 31 208-230/460 2.4 84.0 1.15 11.06 S, US, 12
3/4 1800 56C 113019.00 √ 939 C6T17VC1 31 208-230/460 2.5 80.0 1.15 10.56 S, US, 12
3/4 1800 56C 116645.00 √ 939 C6T17FC204 28 208-230/460 2.8 77.0 1.15 10.87 S, US, 13
HVAC / Fan
Motors
1 3600 56C 113023.00 √ 957 C6T34VC2 38 230/460 2.6 77.0 1.15 11.56 S, US, 12
1 1800 56C 119468.00 √ 1,049 C6T17WC380 35 208-230/460 3.2 85.5 1.15 12.87 S, US, 13
1 1800 143TC 122179.00 √ 1,067 C143T17WC130 38 208-230/460 3.2 85.5 1.15 12.93 S, US, 13
1 1⁄2 3600 56C 113024.00 √ 1,016 C6T34VC3 45 230/460 3.8 84.0 1.15 12.56 S, US, 12
1 1/2 1800 56C 119469.00 √ 1,080 C6T17WC51 40 208-230/460 4.8 86.5 1.15 13.37 S, US, 13
1 1/2 1800 145TC 122180.00 √ 1,090 C145T17WC42 43 208-230/460 4.8 86.5 1.15 13.43 S, US, 13
Special Voltage
2 3600 56C 119472.00 √ 1,277 C6T34WC27 41 208-230/460 4.8 85.5 1.00 13.37 S, US, 13
Motors
2 3600 145TC 122183.00 √ 1,314 C145T34WC22 44 208-230/460 4.8 85.5 1.15 13.43 S, US, 13
2 1800 56C 119471.00 √ 1,298 C6T17WC383 50 208-230/460 5.8 86.5 1.15 13.87 S, US, 13
2 1800 145TC 122182.00 √ 1,350 C145T17WC131 60 208-230/460 5.8 86.5 1.15 13.93 S, US, 13
3 3600 56C 119473.00 √ 1,598 C6T34WC28 44 208-230/460 8.0 86.5 1.15 13.62 S, US, 13
3 3600 145TC 122184.00 √ 1,628 C145T34WC23 57 208-230/460 8.0 86.5 1.15 13.68 S, US, 13
3 1800 182TC 122184.00 √ 1,628 C182T17WC13 57 208-230/460 8.0 86.5 1.15 13.68 S, US, 13
Purpose Motors
5 3600 184TC 132441.00 √ 2,136 C184T34WC10 58 230/460 12.0 88.5 1.15 14.97 S, US, 13
5 1800 184TC 132440.00 √ 2,083 C184T17WC10 67 230/460 12.6 89.5 1.15 15.47 S, US, 13
Definite
7 1/2 3600 213TC 141267.00 √ 2,625 C213T17WC5 147 230/460 18.6 89.5 1.00 18.77 S, US, 13
7 1/2 1800 213TC 141266.00 √ 2,637 C213T17WC4 135 230/460 19.6 91.7 1.15 18.77 S, US, 13
10 3600 215TC 141269.00 √ 3,174 C215T34WC5 124 230/460 23.6 90.2 1.15 20.27 S, US, 13
10 1800 215TC 141268.00 √ 3,156 C215T17WC4 150 230/460 26.4 91.7 1.15 20.27 S, US, 13
15 3600 215TC G140738.00 D 3,872 C215T34WC4 156 230/460 36.0 90.2 1.15 20.58 S, US, 13
15 3600 215TC 141357.00 √ 3,919 C215T34WC8 156 230/460 35.0 91.0 1.15 20.58 S, US, 13
Brake Motors
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
Note 12 - TENV
Note 13 - TEFC
IEC Motors
DC Motors
148
Washguard® Motors
White Epoxy Painted - Three Phase
Motors
Pump
Washguard
Motors
Three Phase - TEFC - Rigid Base
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/2 1800 56 112427.00 √ 797 C6T17WB6 27 208-230/460 2.0 74.0 1.15 10.50 S, US
3/4 1800 56 112428.00 √ 832 C6T17WB7 30 208-230/460 2.8 77.0 1.15 10.50 S, US
Duty Motors
Agricultural
1 1800 56 119475.00 √ 1,077 C6T17WB18 57 208-230/460 3.2 85.5 1.15 12.25 S, US
1 1800 143T 121865.00 √ 1,100 C143T17WB4 39 230/460 3.2 85.5 1.15 13.18 S, US
1 1⁄2 1800 145T 121869.00 √ 1,102 C145T17WB23 44 230/460 4.8 86.5 1.15 13.43 S, US
2 1800 145T 121866.00 √ 1,370 C145T17WB22 48 230/460 5.8 86.5 1.15 13.93 S, US
3 3600 182T 132388.00 C/A 1,877 C182T34WB1 74 208-230/460 7.6 86.5 1.25 13.96 S, MX
3 1800 182T 132196.00 √ 1,841 C182T17WB10 78 230/460 7.8 89.5 1.15 14.46 S, MX
5 3600 184T 132202.00 √ 2,105 C184T34WB5 89 230/460 12.0 88.5 1.25 14.96 S, MX
HVAC / Fan
5 1800 184T 132197.00 √ 2,105 C184T17WB8 90 230/460 12.6 89.5 1.15 13.96 S, MX
Motors
7 1⁄2 3600 184T 132306.00 C/A 2,625 C184T34WB6 87 230/460 17.6 89.5 1.15 15.96 S, MX
7 1⁄2 3600 S213T 132204.00 C/A 2,625 C184T34WB6 87 230/460 17.6 89.5 1.15 16.59 S, MX
7 1⁄2 1800 213T 140819.00 √ 2,672 C213T17WB6 161 230/460 21.6 91.7 1.25 18.71 S, MX
10 1800 215T 140820.00 √ 3,195 C215T17WB5 181 230/460 26.8 91.7 1.25 19.71 S, MX
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Special Voltage
Motors
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
149
Washguard® Motors
White Epoxy Painted - Three Phase
Motors
Pump
Washguard
Motors
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/4 1800 56C 112523.00 √ 746 C6T17WK8 24 208-230/460 1.1 59.5 1.15 10.37 S, US, 13
1/3 3600 56C 116641.00 C/A 790 C6T34VK15 22 208-230/460 1.1 77.0 1.15 10.08 S, US, 12
Duty Motors
Agricultural
1/3 1800 56C 112547.00 √ 821 C6T17WK9 25 208-230/460 1.7 68.0 1.15 10.37 S, US, 13
1/2 3600 56C 113588.00 √ 743 C6T34VK3 29 208-230/460 1.6 82.5 1.15 10.58 S, US, 12
1/2 1800 56C 113586.00 √ 832 C6T17VK2 25 208-230/460 1.8 78.5 1.15 10.08 S, US, 12
1/2 1800 56C 112429.00 √ 832 C6T17WK1 25 208-230/460 2.0 74.0 1.15 10.87 S, US, 13
1/2 1200 56C 115743.00 √ 1,041 C6T11VK1 34 208-230/460 2.3 77.0 1.15 11.58 S, US, 12
3/4 3600 56C 113589.00 √ 816 C6T34VK2 32 208-230/460 2.4 84.0 1.15 11.08 S, US, 12
3/4 1800 56C 113587.00 √ 964 C6T17VK1 33 208-230/460 2.5 80.0 1.15 10.58 S, US, 12
HVAC / Fan
3/4 1800 56C 112430.00 √ 964 C6T17WK2 29 208-230/460 2.8 77.0 1.15 10.87 S, US, 13
Motors
3/4 1200 56HC 115744.00 √ 1,132 C6T11VK2 47 208-230/460 3.0 78.5 1.15 13.06 S, US, 12
1 3600 56C 113590.00 √ 955 C6T34VK4 37 230/460 2.6 77.0 1.15 11.58 S, US, 12
1 1800 56H 119476.00 √ 1,114 C6T17WK44 38 208-230/460 3.2 85.5 1.15 12.87 S, US, 13
1 1800 143TC 121867.00 √ 1,156 C143T17WK11 40 208-230/460 3.2 85.5 1.15 13.68 S, US, 13
1 1200 56HC 119478.00 √ 1,392 C6T11WK11 43 208-230/460 3.8 82.5 1.15 13.37 S, US, 13
1 1/2 3600 56C 113591.00 √ 1,053 C6T34VK5 47 230/460 3.8 84.0 1.15 12.56 S, US, 12
Special Voltage
1 1/2 1800 145TC 121871.00 √ 1,204 C145T17WK31 45 230/460 4.8 86.5 1.15 13.68 S, US, 13
Motors
1 1/2 1800 56C 119480.00 √ 1,280 C6T17WK45 66 208-230/460 4.8 86.5 1.15 13.37 S, US, 13
1 1/2 1200 56HC 132563.00 √ 1,778 C182T11WK1 79 230/460 6.0 87.5 1.15 15.96 S, US, 13
2 3600 56HC 119482.00 √ 1,380 C6T34WK33 44 208-230/460 4.8 85.5 1.15 13.37 S, US, 13
2 3600 145TC 122185.00 √ 1,390 C145T34WK37 34 208-230/460 4.8 85.5 1.15 13.43 S, US, 13
2 1800 56C 119483.00 √ 1,400 C6T17WK46 38 208-230/460 5.8 86.5 1.15 13.87 S, US, 13
2 1800 145TC 121868.00 √ 1,489 C145T17WK30 48 230/460 5.8 86.5 1.15 13.93 S, US, 13
Purpose Motors
3 3600 145TC 121870.00 √ 1,760 C145T34WK28 48 230/460 8.0 89.5 1.15 13.68 S, US, 13
Definite
3 3600 182TC 132199.00 √ 2,023 C182T34WK1 80 230/460 7.6 86.5 1.25 14.97 S, MX, 13
3 1800 182TC 132198.00 √ 1,995 C182T17WK13 79 230/460 7.8 89.5 1.15 14.47 S, MX, 13
5 3600 184TC 132200.00 √ 2,500 C184T34WK10 90 230/460 12.0 88.5 1.15 14.97 S, MX, 13
5 1800 184TC 132201.00 √ 2,254 C184T17WK15 91 230/460 12.6 89.5 1.15 15.47 S, MX, 13
7 1/2 3600 184TC 132205.00 √ 3,099 C184T34WK21 101 230/460 17.6 89.5 1.15 15.97 S, MX, 13
7 1/2 3600 213TC 141120.00 √ 3,170 C213T34WK6 140 230/460 17.8 90.2 1.15 20.57 S, MX, 13
7 1/2 1800 213TC 140822.00 √ 2,905 C213T17WK9 157 230/460 21.6 91.7 1.25 18.71 S, MX, 13
Brake Motors
10 3600 215TC 140823.00 √ 3,741 C215T34WK9 164 230/460 23.6 91.7 1.15 21.82 S, US, 13
10 1800 215TC 140821.00 √ 3,302 C215T17WK9 179 230/460 26.8 91.7 1.25 19.71 S, MX, 13
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Note 12 - TENV
Note 13 - TEFC
IEC Motors
DC Motors
150
Washguard® Motors
White Epoxy Painted - Three Phase
Motors
Pump
Washguard
Motors
Three Phase - 575 Volts
Three Phase - TEFC - C Face With Base
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Duty Motors
Factor (Inches) Notes
Agricultural
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 575 V Eff.
1/4 1800 56C 112520.00 √ 746 C6T17WK5 27 575 0.4 68.0 1.15 10.62 S, US
1/3 1800 56C 112521.00 √ 772 C6T17WK6 25 575 0.7 68.0 1.15 10.37 S, US
1/2 1800 56C 112483.00 √ 832 C6T17WK3 31 575 0.8 74.0 1.15 10.62 S, US
3/4 1800 56C 112484.00 √ 964 C6T17WK4 27 575 1.1 77.0 1.15 10.87 S, US
1 1800 56C 119479.00 √ 1,210 C6T17WK381 36 575 1.3 85.5 1.15 12.62 S, US
2 1800 145TC 122330.00 √ 1,489 C145T17WK60 45 575 2.3 86.5 1.15 13.93 S, US
HVAC / Fan
Green items are Premium Efficient Note listing on inside back flap
Motors
Specifications are subject to change without notice
Special Voltage
Motors
Three Phase - TEFC - JM Pump
Purpose Motors
SYN App. F. L. “C”
Stock
Definite
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1 1800 143JM 122186.00 C/A 1,431 C143T17WK15 47 208-230/460 3.2 85.5 1.15 15.43 S, US
1 1/2 3600 143JM 122188.00 C/A 1,545 C143T34WK10 45 208-230/460 4.0 84.0 1.15 15.43 S, US
1 1/2 1800 145JM 122187.00 √ 1,591 C145T17WK57 47 208-230/460 4.8 86.5 1.15 15.93 S, US
2 3600 145JM 122189.00 √ 1,901 C145T34WK38 50 208-230/460 4.8 85.5 1.15 15.93 S, US
2 1800 145JM 122190.00 √ 1,656 C145T17WK58 54 208-230/460 5.8 86.5 1.15 16.43 S, US
Brake Motors
3 3600 145JM 122191.00 √ 1,897 C145T34WK39 52 208-230/460 8.0 86.5 1.15 16.43 S, US
3 1800 182JM G131967.00 D 1,951 C182T17WK15 70 230/460 8.6 87.5 1.15 16.13 S, MX
3 1800 182JM 132442.00 √ 2,107 C182T17WK20 90 208-230/460 7.8 89.5 1.15 16.13 S, MX
5 3600 184JM 132443.00 √ 2,465 C184T34WK18 88 208-230/460 12.0 88.5 1.15 16.63 S, MX
5 1800 184JM 132444.00 √ 2,255 C184T17WK24 89 208-230/460 12.6 89.5 1.15 16.63 S, MX
7 1/2 3600 184JM 132446.00 √ 2,715 C184T34WK19 90 208-230/460 17.6 90.1 1.15 17.63 S, MX
7 1/2 1800 213JM 141270.00 √ 3,036 C213T17WK17 135 230/460 19.6 91.7 1.15 21.40 S, MX
10 3600 215JM 141271.00 √ 3,667 C215T34WK15 91 230/460 23.6 90.2 1.15 21.40 S, MX
IEC Motors
10 1800 215JM 141272.00 √ 3,476 C215T17WK18 168 230/460 26.4 91.7 1.15 22.90 S, MX
15 3600 215JM 141358.00 √ 4,032 C215T34WK19 156 230/460 35.0 91.0 1.15 21.71 S, MX
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
C/A - Check Availability
DC Motors
151
Motors Washguard® Jet Pump Motors
Pump
Wash down duty three phase jet pump motors for industrial
service. These motors include all of the features of LEESON’s
Washguard
Motors
1 3600 56J 116775.00 √ 957 C6T34WC15 30 208-230/460 3.2 77.0 1.15 11.37 S, US
1 1/2 3600 56J 119459.00 √ 1,102 C6T34WC24 36 208-230/460 4.0 84.0 1.15 12.87 S, US
2 3600 56J 119460.00 √ 1,370 C6T34WC25 44 208-230/460 4.8 85.5 1.15 13.87 S, US
3 3600 56J 119462.00 √ 1,404 C6T34WC26 47 208-230/460 8.0 86.5 1.15 14.37 S, US
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
Purpose Motors
Definite
Brake Motors
2 3600 56J 119461.00 √ 1,390 C6T34WK31 45 208-230/460 4.8 85.5 1.15 13.87 S, US
3 3600 56J 119463.00 √ 1,423 C6T34WK32 47 208-230/460 8.0 86.5 1.15 14.37 S, US
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
DC Motors
152
Washguard® Motors
Feather Picker Motors
Motors
Pump
Applications:
Replacement motors used in poultry feather picker machines
Washguard
Motors
Features:
• Phosphatized or stainless steel shafts
• Metric motor has a phophatized shaft - drilled and tapped
• Washdown duty features including shaft seals
• Extra high breakdown torques
• Conduit box at 12 o'clock
Duty Motors
Agricultural
• IRIS Insulation system for extra protection and long life,
especially in inverter-driven applications
HVAC / Fan
Motors
Three Phase - TEFC - Rigid Base - Extreme Duck® Ultra- IP69 Rated
Special Voltage
SYN App. F. L. “C”
Stock
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
2 1800 145TC 122308.00 √ 2,680 C145T17WK64 75 230/460 5.8 86.5 1.15 13.25 Encapsulated
3 1800 145T 122472.00 √ 2,741 CZ145T17UK3 64 230/460 8.8 84.0 1.00 13.25 Encapsulated
Green items are Premium Efficient
Purpose Motors
Three Phase - TEFC - Rigid Base
Definite
SYN App. F. L. “C”
Stock
Brake Motors
3 1800 56HZ 119783.00 √ 1,259 C6T17WK48 48 208-230/460 8.6 82.5 1.00 13.93 White Epoxy
3 1800 145T 121944.00 √ 1,259 C145T17FB92 46 208-230/460 8.6 82.5 1.00 13.72 White Epoxy
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
IEC Motors
DC Motors
153
Washguard® Motors
Washdown Duty Brakemotors
Motors
Pump
RPM NEMA Rating Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame (ft lbs) Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3 1800 56C 3 116466.00 C/A 1,636 C6T17VK28 40 208-230/460 1.3 72.0 1.15 14.00 S, US, 12
1/2 1800 56C 3 116467.00 √ 1,669 C6T17VK30 42 208-230/460 1.8 78.5 1.15 14.50 S, US, 12
HVAC / Fan
3/4 1800 56C 6 116468.00 C/A 1,979 C6T17VK29 44 208-230/460 2.5 80.0 1.15 15.00 S, US, 12
Motors
1 1800 56HC 6 119486.00 √ 2,148 C6T17WK47 53 208-230/460 2.8 85.5 1.15 17.00 S, US, 13
1 1800 143TC 6 122193.00 √ 2,168 C143T17WK14 53 208-230/460 2.8 85.5 1.15 17.02 S, US, 13
1 1/2 1800 145TC 10 122195.00 √ 2,957 C145T17WK55 55 208-230/460 4.8 86.5 1.15 18.50 S, US, 13
2 1800 145TC 10 122197.00 C/A 3,046 C145T17WK56 67 208-230/460 5.8 86.5 1.15 19.00 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Special Voltage
Note 12 - TENV
Note 13 - TEFC
Motors
Purpose Motors
Definite
Brake Motors
RPM NEMA Rating Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame (ft lbs) Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3 1800 56C 3 116462.00 √ 1,579 C6T17VC43 39 208-230/460 1.3 72.0 1.15 14.00 S, US, 12
1/2 1800 56C 3 116463.00 √ 1,618 C6T17VC42 41 208-230/460 1.8 78.5 1.15 14.50 S, US, 12
3/4 1800 56C 6 116464.00 √ 1,925 C6T17VC44 43 208-230/460 2.5 80.0 1.15 15.00 S, US, 12
IEC Motors
1 1800 56C 6 119485.00 √ 2,123 C6T17WC54 50 208-230/460 2.8 85.5 1.15 17.00 S, US, 13
1 1800 143TC 6 122192.00 √ 2,137 C143T17VC9 52 208-230/460 3.2 85.5 1.15 17.21 S, US, 13
1 1⁄2 1800 145TC 10 122194.00 √ 2,920 C145T17WC44 55 208-230/460 4.8 86.5 1.15 18.50 S, US, 13
2 1800 145TC 10 122196.00 √ 2,995 C145T17WC45 65 208-230/460 5.8 86.5 1.15 19.00 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
DC Motors
154
Washguard® Motors
Wash down Duty Brakemotors
Motors
Pump
White Epoxy Painted
Washguard
Motors
Washguard Coupler Brakes
Solid die-cast aluminum Stearns® NEMA® 4X coupler brake converts any TEFC
or TENV 56C - 145TC motor to a fail-safe brakemotor by mounting between the
C-face motor and driven equipment. Food safe white epoxy finish. BISSC Certified.
Duty Motors
Agricultural
Adds 5” to the overall length of 56C thru 145TC Washguard TEFC or TENV motors.
Includes all mounting components.
HVAC / Fan
115/230V List 208-230/460V List Cat. No. 575V List Rating @ 1725 Mounts to Coupler Brake Output Wgt.
Motors
Single Phase Price Three Phase Price Three Phase Price (ft lbs) RPM NEMA Frame Shaft and Face (lbs)
175566.00 1,446 175567.00 1,446 0 1,446 3 1 56C 5⁄8”, 56C 13
175572.00 1,556 175573.00 1,556 0 1,556 6 2 56C/143-5TC 5⁄8”, 56C 14
Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
Washguard Brake Kits
Purpose Motors
Kit of components including a Stearns NEMA 4X brake to convert 56 - 145T
frame stock TEFC only motors to fail-safe brakemotors. Food safe white epoxy
Definite
finish. BISSC Certified. Adds 5 1/8” to the overall length of 56 - 145T Washguard
TEFC motors.
Brake Motors
Cat. No.
230/460 V App.
Brake Rating Mounts to Max. HP @ Brake Coil List Wgt.
(ft lbs) NEMA Frame 1725rpm Voltage Price (lbs)
3 56/143-5T 1 175771.00* 1,608 24
6 56/143-5T 2 175772.00* 1,694 36
10 56/143-5T 3 175773.00* 1,785 43
IEC Motors
Features:
Motors
• USDA-approved finish
• Sealed bearings
• Interior corrosion protected
• Internally locked shaft-end bearing
• Shaft seals on both ends
• Cast iron frame & conduit box
Duty Motors
Agricultural
• Rigid C face
• IP54 enclosure protection
• Potted leads
• Normally closed T-Stats
• Premium efficiency
HVAC / Fan
Motors
RPM NEMA Catalog List Model Wgt. load Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Number (lbs) Voltage Prot. @ 230 V Eff. Factor (Inches) Notes
Special Voltage
1/2 1800 56CY 119955.00 √ 1,350 C6T17EK12 32 230/460 T-Stat 1.6 80.0 1.00 11.11 C, US, 12
Motors
3/4 1800 56CY 119956.00 √ 1,377 C6T17EK13 35 230/460 T-Stat 2.4 81.5 1.00 11.11 C, US, 13
1 1800 56CY 119957.00 √ 1,580 C6T17EK14 49 230/460 T-Stat 3.0 85.5 1.00 13.36 C, US, 13
1 1800 143TC 122395.00 √ 1,580 C143T17EX1 50 230/460 T-Stat 3.0 85.5 1.00 13.42 C, US, 13
1 1/2 1800 56CY 119958.00 √ 1,694 C6T17XK42 52 230/460 T-Stat 4.6 86.5 1.00 15.13 C, US, 13
1 1/2 1800 145TC 122396.00 √ 1,694 C145T17EK10 53 230/460 T-Stat 4.8 86.5 1.00 15.19 C, US, 13
2 1800 145TC 122397.00 √ 1,788 C145T17EK11 56 230/460 T-Stat 6.0 86.5 1.00 13.42 C, US, 12
Purpose Motors
Green items are Premium Efficient Note listing on inside back flap
Definite
156
Washguard® Motors
DC Washdown™ Duty Motors
Motors
Pump
White Epoxy Painted
Washguard
Motors
Duty Motors
Agricultural
DC - SCR Rated 90 & 180 Volts - IP55 - C Face with Removable Base
SYN App. Control F.L. “C”
Stock
HVAC / Fan
1/4 1750 SS56C 098375.00 C/A 957 C42D17VK1 26 180 230 1.4 10.22 S, US, 12
Motors
1/3 1750 S56C 108424.00 √ 1,012 C4D17VK10 29 90 115 3.5 11.69 S, US, 12
1/3 1750 SS56C 098376.00 C/A 1,012 C42D17VK2 30 180 230 1.7 10.22 S, US, 12
1/2 1750 S56C 108226.00 √ 1,136 C4D17VK1 41 90 115 5.0 13.69 S, US, 12
1/2 1750 S56C 108227.00 √ 1,136 C4D17VK2 46 180 230 2.4 13.69 S, US, 12
3/4 1750 S56C 108228.00 √ 1,379 C4D17VK3 53 90 115 7.0 15.69 S, US, 12
3/4 1750 S56C 108229.00 √ 1,379 C4D17VK4 50 180 230 3.7 15.69 S, US, 12
Special Voltage
1 1750 S56C 108230.00 √ 1,679 C4D17WK1 50 90 115 10.0 15.81 S, US, 13
Motors
1 1750 S56C 108231.00 √ 1,679 C4D17WK2 51 180 230 5.0 14.81 S, US, 13
1 1/2 1750 S56C 108232.00 √ 2,146 C4D17WK3 53 180 230 7.6 15.81 S, US, 13
Purpose Motors
Definite
Washguard - DC - IEC Frame
180 Volts - TENV IP55 - B5 Flange With Removable B3 Base
Full App. Control F.L. “C”
Stock
Brake Motors
1/2 - .37 1750 71 098040.00 C/A 1,004 42D17VD1 25 180 230 2.5 10.69 S, US
3/4 - .55 1750 80 108407.00 D 1,361 4D17VD1 52 180 230 3.5 16.02 S, US
D - Item to be discontinued once inventory is depleted Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
If base is removed, do not reinstall bolts without using washers to compensate for the thickness of
IEC Motors
base. These Washguard motors are modular design but stocked with B5 flange and B3 foot. The foot is
removable. The B5 flange can be replaced with a B14 face or other diameter B5 flanges.
All Washdown Duty motors have Class F insulation.
DC Motors
157
Washguard® Motors
DC Motors
Motors
Pump
General Specifications:
Washguard
Features:
• 303 Stainless steel shaft resist corrosion
• Lubricated spring loaded contact seals prevent moisture from entering the motor
• Patented "V" ring Forsheda® seal deflects water
• Double sealed, oversize bearings with high temp lubricant
HVAC / Fan
• Exterior and interior components protected against moisture, acids, alkalies and oil
Motors
• Chemically inert, static free fan with positive mounting insures it won't move
Definite
DC - Low Voltage Rated 12 & 24 Volts - TENV IP55- C Face with Removable Base
App. F.L.
Stock
Motors
Pump
White Epoxy Painted
General Specifications:
Precision subfractional horsepower DC permanent magnet motors. Designed for use with fullwave
Washguard
Motors
nonfiltered SCR controls or battery supplied low voltage for adjustable speed applications requiring
constant torque throughout the speed range.
Features:
• 303 Stainless steel shaft resists corrosion
Duty Motors
Agricultural
• Lubricated spring loaded contact seals prevent moisture from entering the motor
• Double sealed, oversize bearings with high temp lubricant
• Exterior and interior components protected against moisture, acids, alkalies and oil
• Cast conduit box for superior sealing includes:
- Threaded conduit entrance
- Drain holes
HVAC / Fan
- Nitrile gaskets
Motors
- 304 stainless steel conduit box cover
- Stainless steel hardware
• USDA approved white epoxy finish
• Nylon seals at bolt heads for superior sealing
• O-ring sealed brush covers
Special Voltage
Motors
90 Volts DC - TENV - Square Flange Less Feet
Full App. Control F.L. “C”
Stock
Purpose Motors
1/8 1800 31S M1120181.00 √ 595 M31D17VZ1 11 90 115 1.5 8.57 S, US
1/6 1800 31S M1120183.00 √ 604 M31D17VZ3 11 90 115 1.9 10.07 S, US
Definite
1/4 3600 32 M1120185.00 √ 658 M32D25VC1 13 90 115 2.6 10.00 S, US
Note: M1120185.00 is a C Face mount Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
159
Washguard® Motors
IP55 Washguard Gearmotors - Parallel Shaft
Motors
Pump
• Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable
Motors
Features:
• Gearbox output shafts are coated with Microlon® 3300 fortified teflon for superior corrosion
resistance
• Frame, endshields, armature and interior components protected by enamel and polyester compounds
for resistance to moisture, acids, alkalies and oil
HVAC / Fan
• Cast conduit box with threaded conduit holes and nitrile gaskets keep water out
Motors
• Painted with white epoxy for superior corrosion resistance and protection
Definite
• Machined fits between the endbells and motor frame are sealed with gaskets
• Thru-bolt heads and nuts sealed with fiber washers
• O-rings under each threaded brush cover
Application Notes:
Brake Motors
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as
an SCR control should be used to prevent damage. This issue is even more critical for low voltage
motors, typically no controller is used since motor is connected directly to a battery, so some type of
current limit or fusing should be considered.
• USDA approved white epoxy finish
• Bison®/Dayton® direct interchange
DC Motors
Motors
Pump
Parallel Shaft - White Epoxy Painted
Features:
• Single phase PSC designs include capacitor inside conduit box
Washguard
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
Motors
lubricant into the motor should the motor shaft seal fail.
• Shaft material coated with teflon/ceramic plating
• White epoxy painted motors
• O-rings and gaskets used for sealing
• Hardened worm-type gearing used
• Interior components protected against corrosion
Duty Motors
Agricultural
• Ball bearings used in gear housing
• Sealed output shafts
• Output shafts have needle bearings for high load capacities
• UL listed and CSA certified
• Bison®/Dayton® direct interchange
HVAC / Fan
P240 series AC Wash Down Duty Gearmotors
Motors
F.L. Gearmotor
Stock
Output Torque Input Catalog List Type & Ratio F.L. Amps Over-hung
RPM (Lb.In.) HP Number Price Model Number Frame to 1 Voltage Phase @ 230 V Load (Lbs.)
16 391 5/32 M1145138.00 √ 1,121 CM38P17FZ39 P240 103 115/230 1 1.05 399
40 219 5/32 M1145139.00 √ 1,172 CM38P17FZ40 P240 43 115/230 1 1.40 303
156 60 5/32 M1145140.00 √ 1,029 CM38P17FZ41 P240 10.6 115/230 1 1.40 201
Special Voltage
16 391 1/6 M1145144.00 √ 1,172 CM38T17FZ20 P240 103 230 3 0.72 237
Motors
30 295 1/6 M1145145.00 √ 1,172 CM38T17FZ21 P240 58 230 3 0.72 237
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
P300 Series - SCR RATED - 90V - Parallel Shaft - TENV - 1.0 Service Factor
F.L. Gearmotor
Duty Motors
Agricultural
Stock
Output Torque Input Catalog List Type & Ratio DC Arm. Full Load Over-hung Load
RPM (Lb.In.) HP Number Price Model Number Frame to 1 Volts Amps DC (Lbs.)
5 353 1⁄20 M1125261.00 √ 1,051 CM31D17VZ5 P303-31 336 90 0.8 565
31 220 1⁄8 M1125262.00 √ 1,080 CM31D17VZ6 P303-31 58 90 1.6 327
51 130 1⁄8 M1125263.00 √ 999 CM31D17VZ7 P302-31 35 90 1.6 277
94 77 1⁄8 M1125264.00 √ 999 CM31D17VZ8 P302-31 19 90 1.6 236
167 43 1⁄8 M1125265.00 √ 999 CM31D17VZ9 P302-31 11 90 1.6 197
HVAC / Fan
X
P PB Inches XL XH
3.13 3.8 3.54 10.44 8.94
3.13 3.8 3.54 11.94 10.44
Special Voltage
P300 Series - Low Voltage (12V) - Parallel Shaft - TENV - 1.0 Service Factor
Purpose Motors
F.L Gearmotor
Definite
Stock
Output Torque Input Catalog List Type & DC Arm. Full Load Over-hung Load
RPM (Lb.In.) HP Number Price Model Number Frame Ratio to 1 Volts Amps DC (Lbs.)
5 353 1⁄20 M1125266.00 √ 1,080 CM31D17VZ10 P303-31 336 12 6.4 565
31 220 1⁄8 M1125267.00 √ 1,107 CM31D17VZ11 P303-31 58 12 11.0 327
P PB Inches XL XH
3.13 3.8 3.54 10.44 8.94
3.13 4.43 3.54 11.94 9.94
4.08 REF
.175 PLUG
Ø.625 .624
4.75
"P"
3.375
5.12
3.125 ±.010
3.000
3.50
IMMERSION PROOF
DC Motors
BREATHER
1.125 1.450 1.500 2.00 .281
TYP
4.00
2.250
(8) Ø.230 X .44 DP
(3) 1/4-20 UNC-2B 4.96 REF
.50 DP
162
Washguard® Motors
IP55 Washguard Gearmotors - Parallel Shaft
Motors
Pump
White Epoxy Painted
Washguard
TENV - 1.0 Service Factor - SCR Rated 90V
Motors
F.L. Gearmotor
Stock
Output Torque Input Catalog List Type & Ratio DC Arm. Full Load Over-hung Load
RPM (Lb.In.) HP Number Price Model Number Frame to 1 Volts Amps DC (Lbs.)
14 341 1⁄8 M1125268.00 √ 1,088 M31D25VZ1 P353-31 180 90 1.5 465
42 280 1⁄4 M1125269.00 √ 1,126 M32D25VZ1 P353-32 58 90 2.6 327
83 155 1⁄4 M1125270.00 √ 1,098 M32D25VZ2 P353-32 29 90 2.7 267
Duty Motors
Agricultural
250 45 1⁄4 M1125271.00 √ 1,098 M32D25VZ3 P352-32 10 90 2.3 201
500 25 1⁄4 M1125272.00 √ 1,098 M32D25VZ4 P352-32 5 90 2.4 194
Specifications are subject to change without notice
X
P PB Inches XL XH
3.13 3.8 3.45 11.84 9.84
HVAC / Fan
3.25 3.8 3.45 13.84 11.84
Motors
3.25 3.8 3.45 13.84 11.84
3.25 3.8 3.45 13.84 11.84
3.25 3.8 3.45 13.84 11.84
Specifications are subject to change without notice
Special Voltage
PE350 Series Parallel Shaft - TENV - 1.0 Service Factor - Low Voltage 12V
Motors
F.L Gearmotor
Stock
Output Torque Input Catalog List Type & DC Arm. Full Load Over-hung Load
RPM (Lb.In.) HP Number Price Model Number Frame Ratio to 1 Volts Amps DC (Lbs.)
14 341 1⁄8 M1125273.00 √ 1,114 M31D25VZ2 P353-31 180 12 12.0 465
42 325 1⁄4 M1125274.00 √ 1,233 M32D25VZ5 P353-32 58 12 20.0 327
Purpose Motors
Specifications are subject to change without notice
Definite
X
P PB Inches XL XH
3.13 4.43 3.45 11.58 9.58
3.25 4.43 3.45 13.84 11.84
Brake Motors
3.60 REF "XL" REF 5.00
"XH" 3.625
2.94 REF .19 SQ
x 1.00 LONG 1.812
3.75 REF "X" 2.00 KEY
1/2 NPT .37
1.83 REF
CONDUIT 1.12
PLUG
KEYWAY
3.59 REF
MOTOR
.912
TOP
LEADS
IEC Motors
6.0 LONG
Ø3.25
6.70 REF
6.08
MIN
3.625
Ø.750 .749
4.93
Ø1.53
.90 REF
4.00
163
Washguard® Motors
IP55 Washguard Right Angle Gearmotors
Motors
Pump
• Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable
speed control having a typical form factor of 1.3 to 1.4
• Designed for battery power or can be used with a low voltage controller with form factor up to 1.05
Features:
• 303 stainless steel gearbox output shaft
• Frame, endshields, armature and interior components protected by enamel and polyester compounds
for resistance to moisture, acids, alkalies and oil
HVAC / Fan
• Cast conduit box with threaded conduit holes and nitrile gaskets keep water out
Motors
• Painted with white epoxy for superior corrosion resistance and protection
Motors
• Machined fits between the endbells and motor frame are sealed with gaskets
• Thru-bolt heads and nuts sealed with fiber washers
• O-rings under each threaded brush cover
• Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and
Purpose Motors
quiet operation
Definite
Application Notes :
• These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other
mountings, the breather plug must be reoriented by using a 90 deg 1/8” NPT taper pipe elbow (See
drawing). This elbow not available as a motor accessory from Regal. It is not recommended to place the
gearmotor with gearbox shaft up.
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
IEC Motors
lubricant into the motor should the motor shaft seal fail.
• Overhung load capacities shown are at center of output shaft
DC Motors
164
Washguard® Motors
IP55 Washguard Right Angle Gearmotors
Motors
Pump
White Epoxy Painted
Washguard
TENV - 1.0 Service Factor - SCR Rated 90V
Motors
F.L. Gearmotor
Stock
Output Torque Input Catalog List Type & Ratio DC Arm. Full Load Over-hung Load
RPM (Lb.In.) HP Number Price Model Number Frame to 1 Volts Amps DC (Lbs.)
42 80 1⁄8 M1125275.00 √ 1,088 M31D25VZ3 13F60-31 60 90 2.2 235
250 25 1⁄8 M1125276.00 √ 1,088 M31D25VZ4 13F10-31 10 90 2.4 235
62 135 1⁄4 M1125277.00 √ 1,098 M32D25VZ6 13F40-32 40 90 3.7 235
Duty Motors
Agricultural
125 90 1⁄4 M1125278.00 √ 1,098 M32D25VZ7 13F20-32 20 90 3.8 235
250 50 1⁄4 M1125279.00 √ 1,098 M32D25VZ8 13F10-32 10 90 3.7 235
Specifications are subject to change without notice
X
P PB Inches XL XH
3.13 3.8 4.5 10.86 6.36
HVAC / Fan
3.13 3.8 4.5 10.86 6.36
Motors
3.25 3.8 4.5 12.86 8.36
3.25 3.8 4.5 12.86 8.36
3.25 3.8 4.5 12.86 8.36
Specifications are subject to change without notice
Special Voltage
PE350 Series Parallel Shaft - TENV - 1.0 Service Factor - Low Voltage 12V
Motors
F.L Gearmotor
Stock
Output Torque Input Catalog List Type & DC Arm. Full Load Over-hung Load
RPM (Lb.In.) HP Number Price Model Number Frame Ratio to 1 Volts Amps DC (Lbs.)
62 135 1⁄4 M1125280.00 √ 1,042 M32D25VZ9 13F40-32 40 12 28.0 235
125 90 1⁄4 M1125281.00 √ 1,089 M32D25VZ10 13F20-32 20 12 28.0 235
Purpose Motors
Specifications are subject to change without notice
Definite
X
P PB Inches XL XH
3.25 4.43 4.5 12.36 7.86
3.25 4.43 4.5 12.36 7.86
Brake Motors
"BD" REF
"XL" REF
3.60 REF
"XH" "X"
2.94 REF
3.75 REF
1/2 NPT
CONDUIT
PLUG
1.83 REF
2.76
MOTOR LEADS
6.00 LG MIN TOP
IEC Motors
"AF"
"P"
4.62 MAX
FLAT
1.330
1.50
.593
FLAT
1.80
1.67
IMMERSION PROOF
BREATHER .187 SQ
X 1.13 LONG LEY
3.00
VIEW "Z-Z"
165
Washguard® Motors
IP55 AC Washguard Gearmotors
Motors
Pump
Right Angle
Features:
• Single phase PSC designs include capacitor inside conduit box
Washguard
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
Motors
lubricant into the motor should the motor shaft seal fail.
• Shaft material coated with teflon/ceramic plating
• White epoxy painted motors
• O-rings and gaskets used for sealing
• Hardened worm-type gearing used
• Interior components protected against corrosion
Duty Motors
Agricultural
F.L. Gearmotor
Stock
Output Torque Input Catalog List Type & Ratio F.L. Amps Over-hung
RPM (Lb.In.) HP Number Price Model Number Frame to 1 Voltage Phase @ 230 V Load (Lbs.)
43 113 1/6 M1145141.00 √ 1,463 CM38P17FZ42 Right-Angle 40 115/230 1 1.0 235
83 75 1/6 M1145142.00 √ 1,463 CM38P17FZ43 Right-Angle 20 115/230 1 1.0 235
340 23 1/6 M1145143.00 √ 1,463 CM38P17FZ44 Right-Angle 5 115/230 1 1.4 235
Special Voltage
172 105 1/6 M1145147.00 √ 1,463 CM38T17FZ23 Right-Angle 10 230 3 1.3 235
166
Washguard® Motors
Chemical Resistance Comparison
Motors
Pump
White Stainless
Chemical Name % Concentration Exposure
Epoxy Steel
Washguard
Motors
Fresh Water 100 Continuous Excellent Excellent
Duty Motors
Agricultural
Calcium Hydroxide (Lime) 100 Intermittent Good Excellent
HVAC / Fan
Lactic Acid Dilute Intermittent Excellent Excellent
Motors
Lactic Acid 100 Intermittent Fair Fair
Special Voltage
Sodium Hydroxide 5 Continuous Fair Excellent
Motors
Sodium Hydroxide 20 Continuous Fair Excellent
Purpose Motors
Definite
Toluene 100 Continuous Fair Fair
Brake Motors
Cutting Oils NA Continuous Excellent Excellent
167
DE-FEATHERING
SCALDING
FEEDING
PROCESSING
CUTTING
SLICING
INSPECTION
DE-BONING
Motors
Pump
Stainless Frame - Three Phase - Standard, EPAct & NEMA® Premium Ratings
Washguard
Motors
caustic solutions, areas of high humidity and in chemical environments.
Features:
• Paint free exterior
• BISSC certified for the baking industry
• Stainless steel output shafts
Duty Motors
Agricultural
• Repositional drain plugs for all angle mounting
• Double sealed bearings
• Output shaft seal
• Inverter duty IRIS® insulation system
HVAC / Fan
Motors
SYN App. F. L. “C”
Stock
Special Voltage
1 1800 143TC 122198.00 √ 1,262 CZ143T17WC14 48 208-230/460 3.2 85.5 1.15 12.72 S, US, 13
Motors
1 1/2 1800 56C 119488.00 √ 1,324 CZ6T17WC55 47 208-230/460 4.8 86.5 1.15 13.16 S, US, 13
1 1/2 1800 145TC 122199.00 √ 1,324 CZ145T17WC46 48 208-230/460 4.8 86.5 1.15 13.22 S, US, 13
2 1800 56C 119489.00 √ 1,505 CZ6T17WC56 53 208-230/460 5.8 86.5 1.15 13.66 S, US, 13
2 1800 145TC 122200.00 √ 1,505 CZ145T17WC47 54 208-230/460 5.8 86.5 1.15 13.72 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Purpose Motors
Note 13 - TEFC
Definite
Stainless Frame - C Face With Base - Totally Enclosed
SYN App. F. L. “C”
Stock
Brake Motors
1/2 1800 56HC 114560.00 √ 975 CZ6T17VK3 34 208-230/460 1.6 78.5 1.15 11.56 S, US, 6, 12
3/4 1800 56HC 114561.00 √ 1,127 CZ6T17VK4 38 208-230/460 2.3 80.0 1.15 11.56 S, US, 6, 12
1 1800 56HC 119490.00 √ 1,266 CZ6T17FK385 38 208-230/460 3.2 85.5 1.15 12.65 S, US, 6, 13
1 1800 143TC 122201.00 √ 1,266 CZ143T17WK19 49 208-230/460 3.2 85.5 1.15 13.16 S, US, 13
1 1⁄2 1800 145TC 121912.00 C/A 1,345 CZ145T14KW40 47 230/460 4.8 86.5 1.15 13.22 S, US, 13
2 1800 145TC 121913.00 √ 1,572 CZ145T14WK41 50 230/460 5.8 86.5 1.25 13.72 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
IEC Motors
SST StainlessDuck
This member of the LEESON family of tough duck motors is designed for long life in demanding washdown
Washguard
Motors
applications. FHP Washguard SST All-Stainless motors are Stainless Steel Tough!
Built with all stainless steel external components to prevent corrosion and well sealed against moisture
and condensation to protect internal components, the Washguard SST all-stainless steel motors are able
to withstand the severe washdown environments found in the food processing, chemical processing, and
beverage industries.
Duty Motors
Agricultural
corrosion resistance.
Motors
Laser-etched full-fact
nameplate on motor frame. Anti-corrosion coating applied
to rotor and heavy polyester
varnish on stator and to prevent
corrosion.
Special Voltage
moisture-resistant high-temperature
grease.
Four condensate drains in each endshield (at three, six, nine and twelve o’clock) provide
IEC Motors
locations to purge condensate and water, which may enter the motor.
DC Motors
170
Washguard® Motors
SST - All Stainless Motors
Motors
Pump
Washguard
Motors
Single-Phase - TEFC - C Face With Base
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Factor (Inches) Notes
1/2 3600 56C 191474.00 √ 825 C6C34WK18 30 115/230 3.7 1.15 12.24 S, CN
Duty Motors
1/2 1800 56C 191475.00 √ 930 C6C17WK14 32 115/230 4.1 1.15 11.10 S, CN
Agricultural
3/4 3600 56C 191476.00 √ 909 C6C34WK19 31 115/230 4.6 1.15 11.10 S, CN
3/4 1800 56C 191477.00 √ 1073 C6C17WK15 39 115/230 4.9 1.15 11.73 S, CN
1 3600 56C 191478.00 √ 1066 C6C34WK20 39 115/230 6.2 1.15 11.10 S, CN
1 1800 56C 191479.00 √ 1120 C6C17WK16 43 115/230 6.8 1.15 12.24 S, CN
1 1/2 3600 56C 191480.00 √ 1,173 C6K34WK2 45 115/230 8.2 1.15 11.10 S, CN
1 1/2 1800 56C 191481.00 √ 1,170 C6K17WK1 53 115/230 7.9 1.15 13.30 S, CN
2 3600 145TC 191482.00 √ 1,513 C145K34WK2 57 115/230 9.5 1.15 14.00 S, CN
HVAC / Fan
2 1800 145TC 191483.00 √ 1,484 C145K17WK3 57 115/230 8.2 1.15 14.00 S, CN
Motors
Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Stainless Steel Pedestal Fan Motors
Motors
• Extended thru-bolts
• Auto reset protectors
• TEAO designs
Purpose Motors
Definite
SYN App. F. L. “C”
Stock
Brake Motors
1/2 1725 48Y 191547.00 √ 821 A4P17VZ3A 24 115/230 2.6 1.0 11.58 .63 S, CN
1/2 1075 48Y 191548.00 √ 859 A6P11VZ3A 28 115/230 2.7 1.0 12.56 .63 S, CN
171
Washguard® Motors
Motors
SST - All Stainless Motors NEW!
Pump
Washguard
Motors
RPM NEMA Catalog Stock List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3 3600 56C 191200.00 √ 747 C6T34NK26 29 208-230/460 1.0 74.0 1.15 9.78 S, CN, 12
1/3 1800 56C 191201.40 D 885 C6T17NK40 30 208-230/460 1.3 78.5 1.15 9.78 S, CN, 12
1/3 1800 56C 191201.00 √ 836 C6T17NK29 30 208-230/460 1.3 78.5 1.15 9.78 S, CN, 12
1/2 3600 56C 191203.40 D 833 C6T34NK33 32 208-230/460 1.5 77.0 1.15 9.78 S, CN, 12
1/2 3600 56C 191203.00 √ 764 C6T34NK27 32 208-230/460 1.5 77.0 1.15 9.78 S, CN, 12
1/2 1800 56C 191204.00 √ 862 C6T17NK30 33 208-230/460 1.6 81.5 1.15 9.78 S, CN, 12
HVAC / Fan
1/2 1800 56C 191949.00 √ 862 C6T17NK46 34 208-230/460 2.0 72.0 1.15 11.70 S, CN, 13
Motors
1/2 1200 56C 191414.40 D 1,021 C6T11NK7 36 208-230/460 2.0 80.0 1.15 9.76 S, CN, 12
1/2 1200 56C 191414.00 √ 937 C6T11NK4 36 208-230/460 2.0 80.0 1.15 9.76 S, CN, 12
3/4 3600 56C 191206.40 D 915 C6T34NK34 33 208-230/460 2.0 78.5 1.15 9.78 S, CN, 12
3/4 3600 56C 191206.00 √ 839 C6T34NK28 33 208-230/460 2.0 78.5 1.15 9.78 S, CN, 12
3/4 1800 56C 191207.40 D 1,080 C6T17NK48 38 208-230/460 2.3 82.5 1.15 9.78 S, CN, 12
3/4 1800 56C 191207.00 √ 991 C6T17NK31 38 208-230/460 2.3 82.5 1.15 9.78 S, CN, 12
Special Voltage
3/4 1800 56C 191950.00 √ 991 C6T17WK40 39 208-230/460 2.3 82.5 1.15 13.77 S, CN, 13
3/4 1200 56C 191415.40 D 1,175 C6T11NK8 49 208-230/460 3.0 80.0 1.15 11.30 S, CN, 12
Motors
3/4 1200 56C 191415.00 √ 1,078 C6T11NK5 49 208-230/460 3.0 80.0 1.15 9.78 S, CN, 12
1 3600 56HC 191209.00 √ 985 C6T34FK85 41 208-230/460 2.6 80.0 1.15 13.77 S, CN, 6, 13
1 3600 143TC 191486.00 √ 1,228 C143T34WK10 42 208-230/460 2.6 80.0 1.15 13.62 S, CN, 13
1 1800 56C 191574.00 √ 1,035 C6T17NK56 46 208-230/460 3.0 85.5 1.15 11.00 S, CN, 12
1 1800 56HC 191558.00 √ 1,275 C6T17WK41 48 208-230/460 3.0 85.5 1.15 13.77 S, CN, 6, 13
1 1800 143TC 191487.00 √ 1,289 C143T17WK14 48 208-230/460 3.0 85.5 1.15 13.62 S, CN, 13
Purpose Motors
1 1200 56HC 191417.00 √ 1,128 C6T11NK6 49 208-230/460 3.8 82.5 1.15 13.10 S, CN, 13
Definite
1 1200 145TC 191528.00 √ 1,132 C6T11NK6 49 208-230/460 3.8 82.5 1.15 13.20 S, CN, 13
1 1⁄2 3600 56HC 191560.00 √ 1,329 C6T34WK23 48 208-230/460 3.8 84.0 1.15 13.77 S, CN, 6, 13
1 1⁄2 3600 143TC 191488.00 √ 1,357 C143T34WK12 49 208-230/460 3.8 84.0 1.15 13.62 S, CN, 13
1 1⁄2 1800 56HC 191561.00 √ 1,318 C6T17WK43 48 208-230/460 4.4 86.5 1.15 13.77 S, CN, 6, 13
1 1⁄2 1800 145TC 191489.00 √ 1,344 C145T17WK35 49 208-230/460 4.4 86.5 1.15 13.62 S, CN, 13
2 3600 56HC 191562.00 √ 1,602 C6T34WK37 49 208-230/460 5.0 85.5 1.15 13.77 S, CN, 6, 13
2 3600 145TC 191490.00 √ 1,623 C145T34WK26 50 208-230/460 5.0 85.5 1.15 13.62 S, CN, 13
Brake Motors
2 1800 56HC 191563.00 √ 1,564 C6T17WK42 53 208-230/460 5.4 86.5 1.15 13.77 S, CN, 6, 13
2 1800 145TC 191491.00 √ 1,594 C145T17WK37 53 208-230/460 5.4 86.5 1.15 13.62 S, CN, 13
3 3600 145TC 191492.00 √ 1,742 C145T34WK21 62 208-230/460 7.2 86.5 1.15 14.12 S, CN, 13
3 3600 182TC 194000.00 √ 3,097 C182T34WK2 85 230/460 6.9 86.5 1.15 16.97 S, CN, 13
3 1800 182TC 194001.00 √ 3,151 C182T17WK21 120 230/460 7.2 89.5 1.15 16.97 S, CN, 13
5 3600 184TC 194002.00 √ 3,577 C184T34WK21 125 230/460 11.0 88.5 1.15 16.97 S, CN, 13
5 1800 184TC 194003.00 √ 3,527 C184T17WK25 146 230/460 12.4 89.5 1.15 16.97 S, CN, 13
7 1/2 3600 213TC 194004.00 √ 4,897 C213T34WK9 159 230/460 17.4 89.5 1.15 21.57 S, CN, 13
IEC Motors
7 1/2 1800 213TC 194005.00 √ 5,393 C213T17WK19 185 230/460 19.4 91.7 1.15 21.57 S, CN, 13
10 3600 215TC 194006.00 √ 5,143 C215T34WK16 176 230/460 22.8 90.2 1.15 21.57 S, CN, 13
10 1800 215TC 194007.00 √ 5,482 C215T17WK19 207 230/460 25.2 91.7 1.15 21.57 S, CN, 13
15 3600 254TC 194008.00 √ 9,564 C254T34WK1 303 230/460 34.5 91.0 1.15 23.65 S, CN, 13
15 1800 254TC 194009.00 √ 9,624 C254T17WK1 307 230/460 35.5 92.4 1.15 23.65 S, CN, 13
20 3600 256TC 194010.00 √ 10,499 C256T34WK1 375 230/460 45.0 91.0 1.15 25.00 S, CN, 13
20 1800 256TC 194011.00 √ 10,566 C256T17WK1 358 230/460 47.0 93.0 1.15 25.00 S, CN, 13
25 3600 284TC 194012.00 √ 13,165 C284T34WK1 414 230/460 56.5 91.7 1.15 26.97 S, CN, 13
DC Motors
25 1800 284TC 194013.00 √ 13,226 C284T17WKI 425 230/460 57.5 93.6 1.15 26.97 S, CN, 13
30 3600 286TC 194014.00 √ 13,955 C286T34WK1 425 230/460 68.0 91.7 1.15 27.95 S, CN, 13
30 1800 286TC 194015.00 √ 14,025 C286T17WK1 475 230/460 68.0 93.6 1.15 27.95 S, CN, 13
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
172
Washguard® Motors
SST - All Stainless Motors
Motors
Pump
Washguard
Motors
Three Phase - TENV/TEFC - C Face Less Base
Duty Motors
SYN App. F. L. “C”
Agricultural
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3 1800 56C 191202.40 D 904 C6T17NC320 30 208-230/460 1.3 78.5 1.15 9.78 S,CN,12
1/3 1800 56C 191202.00 √ 829 C6T17NC328 30 208-230/460 1.3 78.5 1.15 9.78 S,CN,12
1/2 1800 56C 191205.00 √ 848 C6T17NC329 33 208-230/460 1.6 81.5 1.15 9.78 S,CN,12
1/2 1800 56C 191507.00 √ 848 C6T17WC39 34 208-230/460 2.0 72.0 1.15 11.10 S,CN,13
1/2 1200 56C 191419.00 √ 926 C6T11NC42 35 208-230/460 2.0 80.0 1.15 9.78 S,CN,12
HVAC / Fan
3/4 1800 56C 191208.00 √ 989 C6T17NC322 38 208-230/460 2.3 82.5 1.15 9.78 S,CN,12
Motors
3/4 1800 56C 191508.00 √ 989 C6T17WC40 39 208-230/460 2.3 82.5 1.15 11.20 S,CN,13
3/4 1200 56C 191420.40 D 1,173 C6T11NC49 47 208-230/460 3.0 80.0 1.15 10.36 S,CN,12
3/4 1200 56C 191420.00 √ 1,076 C6T11NC43 47 208-230/460 3.0 80.0 1.15 9.78 S,CN,12
1 1800 56C 191575.00 √ 1,030 C6T17NC169 45 208-230/460 3.0 85.5 1.15 11.00 S,CN, 12
1 1800 56C 191564.00 √ 1,232 C6T17WC46 48 208-230/460 3.0 85.5 1.15 13.77 S,CN,13
1 1800 143TC 191565.00 √ 1,256 C143T17WC9 48 208-230/460 3.0 85.5 1.15 13.62 S,CN,13
Special Voltage
1 1200 56C 191421.00 √ 1,125 C6T11NC44 47 208-230/460 3.8 82.5 1.15 13.10 S,CN,13
Motors
1 1⁄2 1800 56C 191567.00 √ 1,275 C6T17WC63 49 208-230/460 4.4 86.5 1.15 13.77 S,CN,13
1 1⁄2 1800 145TC 191568.00 √ 1,303 C145T17WC39 48 208-230/460 4.4 86.5 1.15 13.62 S,CN,13
2 1800 56C 191569.00 √ 1,504 C6T17WC64 52 208-230/460 5.4 86.5 1.15 13.77 S,CN,13
2 1800 145TC 191570.00 √ 1,554 C145T17WC59 52 208-230/460 5.4 86.5 1.15 13.62 S,CN,13
3 3600 145TC 191542.00 √ 1,389 C145T34WC8 61 208-230/460 7.2 86.5 1.15 13.20 S,CN,13
Green items are Premium Efficient Note listing on inside back flap
Purpose Motors
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
Definite
Note 12 - TENV
Note 13 - TEFC
Brake Motors
IEC Motors
DC Motors
173
Washguard® Motors
Premium - All Stainless Motors
Motors
Pump
Premium
Washguard
StainlessDuck
Motors
Duty Motors
Agricultural
Hydrophobic breathers
in opposite endshield and
conduit box allow passage of
air for pressure equalization
without allowing moisture to
enter the motor.
Purpose Motors
Revolutionary conduit box mounting Viton® O-rings seal the fit between
uses pressure clip the frame and endshields to exclude
to assure maximum sealing and moisture and resist harsh chemicals
allows easy repositioning for Viton double-lip shaft
multiple conduit entry locations. seals on both ends of
Brake Motors
TEFC motors.
IEC Motors
DC Motors
174
Viton is believed to be the trademark of Chemours Company,
and are not owned or controlled by Regal Beloit Corporation.
Washguard® Motors
Premium - All Stainless Motors
Motors
Pump
Single Phase & Three Phase
General Specifications:
Designed specifically to meet the demanding sanitation requirements of the pharmaceutical,
Washguard
food processing and beverage industries. These motors are also ideal in clean room and severe
Motors
chemical-processing applications involving frequent washdown with nitric acid and caustic lye.
Duty Motors
Agricultural
• Nothing on the motor’s exterior is painted or coated in any way
• All sealing components are Viton® for superior chemical resistance
• Full fact nameplate is laser etched on the motor frame – no separately attached nameplate to
trap dirt or contaminants
• Endshields are O-ring sealed to the frame
• Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
HVAC / Fan
Motors
• Removable hydrophobic breathers in opposite shaft endbell and conduit box equalize pressure
without allowing moisture to enter
• Exterior fastener use minimized reducing the number of entry points for moisture. There are no
holes in the frame for attaching a nameplate. Bearing lock screws are located inside the motor
and the conduit box mounted screws have been eliminated
Special Voltage
• Double-sealed bearings are pre-lubricated with moisture-resistant high-temperature grease for
long life
Motors
• Interior coatings applied to rotor and stator protect against corrosion
• New conduit box mounting system provides optimum sealing
• Ease to clean construction is BISSC Certified for bakery applications
Purpose Motors
Electrical Performance and Protection Features:
Definite
• Washguard motor efficiencies meet EPACT mandates for non-exempt motors when tested
without shaft seals.
• Windings are immersed and cured in polyester insulating varnish for extra moisture-resistance
• LEESON® motors exclusive IRIS® Inverter-Rated Insulation System provides extra protection and
long life, especially in inverter-driven applications
Brake Motors
• Single-phase motors use Solid State Sinpac® switch – no mechanical switch contacts to corrode
and fail
• All Wash down duty motors have Class F Insulation
number PRGY2
• CSA Energy Efficiency Verification Program, report number EEV 78720-1
• Construction is CSA Certified for safety report number LR33543 and listed under BISSC
authorization number 769
DC Motors
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/2 3600 56HC 117269.00 √ 1,575 CZ6T34VK19 35 208-230/460 1.6 82.5 1.15 10.47 S, US, 12
1/2 1800 S56C 103387.00 √ 1,579 CZ4T17VK2 37 208-230/460 1.8 76.0 1.15 11.49 S, US, 12
1/2 1800 56HC 117266.00 √ 1,687 CZ6T17VK46 35 208-230/460 1.6 78.5 1.15 11.22 S, US, 12
Duty Motors
Agricultural
1/2 1800 56HC 117762.00 √ 1,687 CZ6T17VK52 38 208-230/460 1.8 78.5 1.15 13.13 S, US, 13
1/2 1200 56HC 117275.00 √ 2,104 CZ6T11VK5 41 208-230/460 2.3 77.0 1.15 11.47 S, US, 12
3/4 3600 56HC 117271.00 √ 1,631 CZ6T34VK20 40 208-230/460 2.4 84.0 1.15 10.97 S, US, 12
3/4 1800 S56C 103388.00 √ 1,637 CZ4T17WK1 41 208-230/460 2.4 78.5 1.15 12.50 S, US, 13
3/4 1800 56HC 117267.00 √ 1,751 CZ6T17VK47 43 208-230/460 2.3 80.0 1.15 11.72 S, US, 12
3/4 1200 56HC 117276.00 √ 2,174 CZ6T11VK6 46 208-230/460 3.0 78.5 1.15 13.22 S, US, 12
1 3600 56HC 117273.00 √ 1,784 CZ6T34VK21 48 230/460 2.6 85.5 1.15 13.22 S, US, 12
HVAC / Fan
1 1800 56HC 119973.00 √ 2,117 CZ6T17VK74 52 230/460 2.8 85.5 1.15 13.70 S, US, 12
Motors
1 1800 56HC 119491.00 √ 2,054 CZ6T17WK52 42 208-230/460 3.2 85.5 1.15 11.94 S, US, 13
1 1800 143TC 121873.00 √ 2,117 CZ143T17WK12 52 230/460 3.2 85.5 1.15 12.00 S, US, 13
1 1200 56HC 119492.00 √ 2,279 CZ6T11WK12 54 208-230/460 3.8 82.5 1.15 12.69 S, US, 13
1 1⁄2 3600 143TC 121874.00 √ 2,135 CZ143T34WK7 46 230/460 4.0 84.0 1.15 11.75 S, US, 13
1 1⁄2 1800 56HC 119494.00 √ 2,137 CZ6T17WK56 58 230/460 4.8 86.5 1.15 12.69 S, US, 13
1 1⁄2 1800 145TC 121875.00 √ 2,166 CZ145T17WK32 53 230/460 4.8 86.5 1.15 12.75 S, US, 13
Special Voltage
1 1⁄2 1200 182TC 132565.00 √ 3,151 C182T11WK2 91 230/460 6.0 87.5 1.15 14.77 S, US, 13
Motors
2 3600 145TC 121876.00 √ 2,534 CZ145T34WK18 54 230/460 4.8 85.5 1.25 12.75 S, US, 13
2 1800 56HC 119495.00 √ 2,511 CZ6T17WK54 54 230/460 5.8 86.5 1.15 13.19 S, US, 13
2 1800 145TC 121877.00 √ 2,561 CZ145T17WK33 59 230/460 5.8 86.5 1.25 13.25 S, US, 13
3 3600 145TC 121878.00 √ 3,049 CZ145T34WK27 56 230/460 8.0 86.5 1.15 13.00 S, US, 13
3 3600 182TC 132203.00 √ 3,120 CZ182T34WK2 85 230/460 7.6 86.5 1.25 14.27 S, MX, 13
3 1800 182TC 132206.00 √ 3,216 C184T17WK14 90 230/460 7.8 89.5 1.15 14.77 S, MX, 13
Purpose Motors
5 3600 184TC 132207.00 √ 3,646 C184T34WK11 103 230/460 12.0 88.5 1.25 15.27 S, MX, 13
Definite
5 1800 184TC 132208.00 √ 3,568 C184T17WK16 101 230/460 12.6 89.5 1.15 15.77 S, MX, 13
7 1⁄2 3600 213TC 140825.00 √ 5,075 C213T34WK4 168 230/460 17.8 90.2 1.15 18.69 S, MX, 13
7 1⁄2 1800 213TC 140826.00 √ 5,727 C213T17WK10 173 230/460 21.6 91.7 1.15 18.69 S, MX, 13
10 3600 215TC 140827.00 √ 5,217 C215T34WK11 182 230/460 23.6 91.7 1.15 18.69 S, MX, 13
10 1800 215TC 140828.00 √ 5,899 C215T17WK10 203 230/460 26.8 91.7 1.15 18.69 S, MX, 13
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
Note 12 - TENV
Note 13 - TEFC
IEC Motors
DC Motors
176
Washguard® Motors
Premium - All-Stainless Motors
Motors
Pump
Washguard
Three Phase - TENV/TEFC - C Face Less Base
Motors
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3 1800 48C 103393.00 C/A 1,335 CZ4T17VC7 28 208-230/460 1.3 70.5 1.15 9.83 S, US, 12
1/2 3600 56C 117279.00 √ 1,545 CZ6T34VC22 35 208-230/460 1.6 82.5 1.15 10.47 S, US, 12
1/2 1800 48C 103394.00 √ 1,364 CZ4T17VC3 37 208-230/460 1.8 76.0 1.15 11.58 S, US, 12
Duty Motors
Agricultural
1/2 1800 S56C 103389.00 √ 1,560 CZ4T17VC4 30 208-230/460 1.8 76.0 1.15 11.49 S, US, 12
1/2 1800 56C 117270.00 √ 1,654 CZ6T17VC56 38 208-230/460 1.6 78.5 1.15 11.22 S, US, 12
3/4 3600 56C 117280.00 C/A 1,598 CZ6T34VC23 40 208-230/460 2.4 84.0 1.15 10.97 S, US, 12
3/4 1800 S56C 103390.00 √ 1,596 CZ4T17WC1 33 208-230/460 2.4 77.0 1.15 12.50 S, US, 13
3/4 1800 56C 117272.00 √ 1,707 CZ6T17VC57 40 208-230/460 2.3 80.0 1.15 11.72 S, US, 12
1 3600 56C 117281.00 √ 1,752 CZ6T34VC24 43 230/460 2.6 85.5 1.15 12.22 S, US, 12
1 1800 56C 119974.00 √ 2,008 CZ6T17VC73 51 230/460 2.8 85.5 1.15 13.22 S, US, 12
HVAC / Fan
1 1800 56C 119497.00 √ 2,008 CZ6T17WC57 47 208-230/460 3.2 85.5 1.15 11.94 S, US, 13
Motors
1 1800 143TC 122202.00 C/A 2,014 CZ143T17WC15 53 208-230/460 3.2 85.5 1.15 12.00 S, US, 13
1 1/2 3600 143TC 122207.00 √ 2,101 CZ143T34WC8 55 208-230/460 4.0 84.0 1.15 12.00 S, US, 13
1 1/2 1800 56C 119498.00 √ 2,108 CZ6T17WC52 52 208-230/460 4.8 86.5 1.15 12.69 S, US, 13
1 1/2 1800 145TC 122203.00 √ 2,114 CZ145T17WC49 58 230/460 4.8 86.5 1.15 12.75 S, US, 13
2 3600 145TC 122205.00 √ 2,478 CZ145T34WC24 57 230/460 4.8 85.5 1.15 13.25 S, US, 13
2 1800 56C 119499.00 √ 2,458 CZ6T17WC58 51 208-230/460 5.8 86.5 1.15 13.19 S, US, 13
Special Voltage
2 1800 145TC 122204.00 √ 2,465 CZ145T17WC48 63 208-230/460 5.8 86.5 1.15 13.25 S, US, 13
Motors
3 3600 145TC 122206.00 √ 2,988 CZ145T34WC25 58 230/460 8.0 86.5 1.15 13.00 S, US, 13
3 1800 182TC 132447.00 √ 3,128 C182T17WC12 91 230/460 7.8 89.5 1.15 14.77 S, MX, 13
5 3600 184TC 132449.00 √ 3,554 C184T34WC11 100 208-230/460 12.0 88.5 1.15 15.77 S, MX, 13
5 1800 184TC 132448.00 √ 3,497 C184T17WC106 105 230/460 12.6 89.5 1.15 15.77 S, MX, 13
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Purpose Motors
Note 12 - TENV
Definite
Note 13 - TEFC
Brake Motors
IEC Motors
DC Motors
177
Washguard® Motors
Premium All Stainless Motors
Motors
Pump
General Specifications:
Same design features as our standard premium stainless motors, only having a built-in shaft grounding ring
that are designed to protect motors. They are used in applications that use AC inverters to control the speed
of the motors. Shaft grounding rings eliminate the stray voltages that may damage the motor’s bearings.
Duty Motors
Agricultural
1/2 1800 56HC 117901.00 √ 1,797 CZ6T17VK53 39 208-230/460 1.6 78.5 1.15 11.22 S, US, 12
3/4 1800 56HC 117902.00 √ 2,017 CZ6T17VK54 42 208-230/460 2.3 80.0 1.15 11.72 S, US, 12
1 1800 56C 119500.00 √ 2,101 CZ6T17WK48 43 208-230/460 3.2 85.5 1.15 11.94 S, US, 13
1 1800 143TC 122215.00 √ 2,164 CZ143T17WK21 43 208-230/460 3.2 85.5 1.15 12.00 S, US, 13
1 1/2 1800 56HC 119501.00 √ 2,185 CZ6T17WK49 54 208-230/460 4.8 86.5 1.15 12.94 S, US, 13
1 1⁄2 1800 145TC 122030.00 √ 2,259 CZ145T17WK52 56 230/460 4.8 86.5 1.15 12.75 S, US, 13
Special Voltage
2 1800 56HC 119502.00 √ 2,550 CZ6T17WK50 70 208-230/460 5.8 86.5 1.15 13.44 S, US, 13
2 1800 145TC 122031.00 √ 2,640 CZ145T17WK53 71 230/460 5.8 86.5 1.25 13.25 S, US, 13
Motors
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
Motors
Pump
Washguard
Motors
Single Phase - TENV/TEFC - C Face With Base
SYN App. F. L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Factor (Inches) Notes
1/3 1800 56HC 116343.00 √ 1,765 NZ6C17VK1 35 115/208-230 2.7 1.15 12.20 S, US, 6, 12
1/2 3600 56HC 116344.00 √ 1,747 NZ6C34VK2 38 115/208-230 3.8 1.15 12.20 S, US, 6, 12
Duty Motors
Agricultural
1/2 1800 56HC 116345.00 √ 1,791 NZ6C17VK2 38 115/208-230 3.3 1.15 12.70 S, US, 6, 12
3/4 1800 56HC 116346.00 √ 1,893 NZ6K17VK2 42 115/208-230 3.8 1.15 12.70 S, US, 6, 12
1 3600 56HC 116347.00 √ 1,981 NZ6C34VK1 49 115/208-230 6.0 1.15 13.70 S, US, 6, 12
1 1800 56HC 116348.00 √ 1,969 NZ6K17VK1 49 115/208-230 4.5 1.15 13.70 S, US, 6, 12
1 1/2 3600 56HC 116482.00 C/A 2,254 CZ6K34WK1 49 115/208-230 6.8 1.15 13.81 S, US, 13
1 1/2 1800 145TC 121622.00 √ 2,046 CZ145K17WK2 53 115/208-230 7.4 1.15 14.87 S, US, 13
2 3600 145TC 121623.00 C/A 2,462 CZ145K34WK1 57 115/208-230 8.8 1.15 14.87 S, US, 13
HVAC / Fan
2 1800 145TC 121632.00 C/A 2,359 CZ145K17WK1 57 115/208-230 10.0 1.15 14.87 S, US, 13
Motors
C/A - Check Availability Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
Special Voltage
Motors
Purpose Motors
Definite
Single Phase - TENV/TEFC - C Face Less Base
SYN App. F. L. “C”
Stock
Brake Motors
3/4 1800 56C 116351.00 √ 1,855 CZ6K17VC2 42 115/208-230 3.8 1.15 12.70 S, US, 12
1 1800 56C 116352.00 √ 1,920 CZ6K17VC1 49 115/208-230 4.5 1.15 13.70 S, US, 12
1 1⁄2 1800 145TC 121624.00 C/A 1,951 CZ145K17WC2 53 115/208-230 7.4 1.15 14.87 S, US, 13
2 1800 145TC 121633.00 C/A 2,243 CZ145K17WC1 57 115/208-230 10.0 1.15 14.87 S, US, 13
179
Washguard® Motors
Stainless Steel Brakemotors & JM Pump Motors
Motors
Pump
Stock
RPM NEMA Rating Catalog List Model Wgt. Amps @ Service Dim.
HP 60 Hz Frame (ft. lbs) Number Price Number (lbs) Voltage 230 V F.L. Eff. Factor (Inches)
1/2 1800 56C 3 116483.00 √ 6,172 CZ6T17VK31 59 208-230/460 1.6 78.5 1.15 16.51
1 1800 56C 6 119785.00 √ 6,950 CZ6T17VK61 73 208-230/460 2.8 85.5 1.15 18.01
Duty Motors
Agricultural
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
2 3600 145JM 122212.00 C/A 2,376 CZ145T34WK40 59 230/460 4.8 85.5 1.15 16.50 S, US
2 1800 145JM 122211.00 √ 2,402 CZ145T17WK59 60 208-230/460 5.8 86.5 1.15 17.00 S, US
Definite
3 3600 145JM 122213.00 √ 2,869 CZ145T34WK41 67 230/460 8.0 86.5 1.15 16.50 S, US
3 1800 182JM 132450.00 √ 3,043 C182T17WK19 94 230/460 7.8 89.5 1.15 16.20 S, MX
5 3600 184JM 132451.00 √ 3,356 C184T34WK17 97 230/460 12.0 88.5 1.15 16.77 S, MX
5 1800 184JM 132452.00 √ 3,357 C184T17WK23 103 230/460 12.6 89.5 1.15 17.27 S, MX
7 1/2 3600 213JM 141274.00 C/A 5,168 C213T34WK8 167 230/460 18.6 89.5 1.15 19.81 S, MX
7 1/2 1800 213JM 141273.00 C/A 5,231 C213T17WK18 169 230/460 19.6 91.7 1.15 19.81 S, MX
Brake Motors
10 3600 215JM 141275.00 C/A 5,398 C215T34WK14 169 230/460 23.6 90.2 1.15 19.81 S, MX
10 1800 215JM 141276.00 √ 5,410 C215T17WK17 178 230/460 26.4 91.7 1.15 19.81 S, MX
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
C/A - Check Availability
IEC Motors
DC Motors
180
Washguard® Motors
IEC Washguard All-Stainless AC Motors
Motors
Pump
Washguard
Motors
IEC B5 Flange - Round Body - Three Phase - TENV/TEFC
SYN App. F. L. “C”
Stock
RPM IEC Catalog List Wgt. Amps % F.L. Service Dim.
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3-0.25 1800 71 103403.00 √ 1,632 CZ4T17VZ16 30 208-230/460 1.3 72.0 1.15 9.87 S, US, 12
Duty Motors
Agricultural
1/3-0.25 1800 80 103405.00 √ 1,632 CZ4T17VZ17 30 208-230/460 1.3 72.0 1.15 9.87 S, US, 12
1/2-0.37 1800 71 103404.00 √ 1,687 CZ4T17VZ6 32 208-230/460 1.8 76.0 1.15 11.62 S, US, 12
1/2-0.37 1800 80 103406.00 √ 1,687 CZ4T17VZ7 32 208-230/460 1.8 76.0 1.15 11.62 S, US, 12
3/4-0.55 1800 80 103407.00 √ 1,789 CZ4T17WZ9 38 208-230/460 2.4 78.5 1.15 12.26 S, US, 13
1- 0.75 1800 90 119507.00 √ 2,080 CZ6T17WC55 48 230/460 3.2 85.5 1.15 12.59 S, US, 13
1.5 - 1.1 1800 90 119508.00 √ 2,178 CZ6T17WC60 52 230/460 4.8 86.5 1.15 13.34 S, US, 13
2 - 1.5 1800 90 119509.00 √ 2,374 CZ6T17WC59 54 208-230/460 5.8 86.5 1.15 13.84 S, US, 13
HVAC / Fan
Green items are Premium Efficient Note listing on inside back flap
Motors
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
Special Voltage
SYN App. F. L. “C”
Stock
Motors
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3-0.25 1800 71 103395.00 √ 1,772 CZ4T17VZ13 30 208-230/460 1.3 72.0 1.15 9.83 S, US, 12
1/3-0.25 1800 80 103397.00 √ 1,632 CZ4T17VZ14 30 208-230/460 1.3 72.0 1.15 9.72 S, US, 12
1/2-0.37 1800 71 103396.00 √ 1,687 CZ4T17VZ3 38 208-230/460 1.8 76.0 1.15 11.58 S, US, 12
1/2-0.37 1800 80 103398.00 √ 1,687 CZ4T17VZ4 38 208-230/460 1.8 76.0 1.15 11.47 S, US, 12
Purpose Motors
3/4-0.55 1800 80 103399.00 √ 1,789 CZ4T17WZ7 41 208-230/460 2.4 78.5 1.15 12.48 S, US, 13
Note 12 - TENV Note listing on inside back flap
Definite
Note 13 - TEFC Specifications are subject to change without notice
Brake Motors
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/3-0.25 1800 80 103408.00 √ 1,659 CZ4T17VZ18 30 208-230/460 1.3 70.5 1.15 9.50 S, US, 12
1/2-0.37 1800 80 103409.00 √ 1,711 CZ4T17VZ8 32 208-230/460 1.8 76.0 1.15 12.75 S, US, 12
3/4-0.55 1800 80 103410.00 √ 1,883 CZ4T17WZ10 38 208-230/460 2.4 77.0 1.15 12.26 S, US, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
IEC Motors
3/4-0.55 1800 80 103402.00 √ 1,932 CZ4T17WZ8 42 208-230/460 2.3 78.5 1.15 12.48 S, US, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
181
Washguard® Motors
NEMA® Washguard
Motors
Pump
Stock
Load NEMA Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/4 1750 S56C 109065.00 √ 1,593 4D17VK24 38 90 115 3.1 11.81 S, US, 12
1/3 1750 S56C 109066.00 √ 1,684 4D17VK25 44 90 115 3.8 12.81 S, US, 12
1/3 1750 S56C 109067.00 √ 1,684 4D17VK26 44 180 230 1.9 12.81 S, US, 12
Duty Motors
Agricultural
1/2 1750 S56C 109069.00 √ 1,967 4D17WK9 46 90 115 5.2 13.87 S, US, 13
1/2 1750 S56C 109070.00 √ 1,967 4D17WK10 46 180 230 2.7 13.87 S, US, 13
3/4 1750 S56C 109072.00 √ 2,395 4D17WK13 54 90 115 7.5 15.37 S, US, 13
3/4 1750 S56C 109073.00 √ 2,395 4D17WK14 48 180 230 3.7 15.37 S, US, 13
1 1750 S56C 109075.00 √ 2,779 4D17WK16 51 90 115 9.5 16.37 S, US, 13
1 1750 S56C 109076.00 √ 2,779 4D17WK17 50 180 230 5.0 16.37 S, US, 13
Base is welded to frame and not removable Note listing on inside back flap
HVAC / Fan
Note 13 - TEFC
Special Voltage
Motors
Load NEMA Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
Purpose Motors
1/4 1750 S56C 109078.00 √ 1,555 4D17VC5 38 90 115 3.1 11.81 S, US, 12
Definite
1/3 1750 S56C 109079.00 √ 1,647 4D17VC6 44 90 115 3.8 12.81 S, US, 13
1/3 1750 S56C 109080.00 √ 1,647 4D17VC7 44 180 230 1.9 12.81 S, US, 13
1/2 1750 S56C 109082.00 √ 1,932 4D17WC2 46 90 115 5.2 13.87 S, US, 13
1/2 1750 S56C 109083.00 √ 1,932 4D17WC3 46 180 230 2.7 13.87 S, US, 13
3/4 1750 S56C 109085.00 √ 2,358 4D17WC5 47 90 115 7.5 15.37 S, US, 13
3/4 1750 S56C 109086.00 √ 2,358 4D17WC6 48 180 230 3.7 15.37 S, US, 13
Brake Motors
Base is welded to frame and not removable Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
IEC Motors
DC Motors
Motors
Pump
All-Stainless DC Motors - SCR Rated
IP55 Enclosure Protection
Washguard
Motors
Full App. Control F. L. “C”
Stock
Load IEC Catalog List Wgt. Arm. Volts AC Amps Dim.
HP/kW RPM Frame Number Price Model Number (lbs) Volts DC Input DC (Inches) Notes
1/3 - 0.25 1750 80D 109068.00 √ 1,684 4D17VK27 44 180 230 1.9 12.81 S, US, 12
1/2 - 0.37 1750 80D 109071.00 √ 1,967 4D17WK11 46 180 230 2.7 13.87 S, US, 13
3/4 - 0.55 1750 80D 109074.00 √ 2,395 4D17WK15 48 180 230 3.7 15.37 S, US, 13
1 - 0.75 1750 80D 109077.00 √ 2,779 4D17WK18 50 180 230 5.0 16.37 S, US, 13
Duty Motors
Agricultural
Base is welded to frame and not removable Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
TEFC - SCR Rated 180V - Metric (IEC) - All-Stainless Steel - C Face Less Base
Full App. Control F. L. “C”
Stock
HVAC / Fan
HP/kW RPM Frame Number Price Model Number (lbs) Volts DC Input DC (Inches) Notes
Motors
1/3 - 0.25 1750 80D 109081.00 √ 1,647 4D17VC8 44 180 230 1.9 12.81 S, US, 12
1/2 - 0.37 1750 80D 109084.00 √ 1,932 4D17WC4 46 180 230 2.7 13.87 S, US, 13
3/4 - 0.55 1750 80D 109087.00 √ 2,358 4D17WC7 48 180 230 3.7 15.37 S, US, 13
1 - 0.75 1750 80D 109090.00 √ 2,744 4D17WC10 50 180 230 5.0 16.37 S, US, 13
Special Voltage
Motors
Flange And Face Kits For DC Metric (IEC) Frame Motors
The modular design concept of LEESON® metric DC motors has been applied to the all-stainless metric
motors. Any flange or face kit can mount on any motor. This allows the greatest flexibility from the smallest
inventory of motors.
Purpose Motors
Definite
B5 Flange Kits (For Stainless DC Metric Motors)
App. AK AJ Bolt
IEC Catalog List Wgt. BD Flange Register BF Hole Circle
Frame Number Price (lbs) Dia. (mm) (mm) (mm) (mm)
71 175593.00 212 2 160 110 9 130
80 175594.00 255 3 200 130 12 165
Brake Motors
90S/90L 175594.00 255 3 200 130 12 165
100L/112M 175595.00 399 5 250 180 15 215
Specifications are subject to change without notice
App. AK AJ Bolt
IEC Catalog List Wgt. BD Flange Register BF Hole Circle
Frame Number Price (lbs) Dia. (mm) (mm) (mm) (mm)
71 175596.00 175 1 105 70 6 85
80 175597.00 161 1 120 80 6 100
90S/90L 175598.00 439 1 140 95 6 115
100L/112M 175599.00 399 2 160 110 6 130
Specifications are subject to change without notice
DC Motors
183
Washguard® Motors
Extreme Duck® Ultra Washguard All-Stainless Motors
Motors
Pump
Winner
2015
300 Series stainless steel components include the frame, base, conduit box cover, endshields
and bearing carrier cover. It’s the perfect motor design for extreme washdown conditions.
HVAC / Fan
sealing protection.
Motors
encapsulation—including both
endbells—reduces interior air Two-piece shaft seal
Definite
Motors
Pump
Three Phase - Standard,
EPAct & NEMA Premium® Ratings
Winner
2015
Washguard
General Specifications:
Motors
These revolutionary designed stainless steel motors are built using our “Voice of the customer”
design criteria to withstand extreme washdown and sanitation requirements of the food processing,
pharmaceutical, packaging and beverage industries. Our innovative hydro sealed system “HS2”protects
from the “outside-in” by reducing entrance points of contaminants and eliminates the need for drain
plugs and breathers. This proven process also minimizes exterior hardware, which may trap application
Duty Motors
Agricultural
elements. Our unique Q-Car™ rotor cartridge seal system, “Q-Car”, gives quick access to the interior
of the motor should the need arise. 300-series stainless steel used on all exterior surfaces gives ideal
protection against severe chemical-processing applications and frequent washdown processes using salt
water, nitric acids and solvents.
HVAC / Fan
Motors
bolts saving you time and money
• Full-fact nameplate permanently laser etched into motor frame will never be separated from motor
• Double-sealed ball bearings with high temperature grease
• Two-piece shaft seal resists water for improved performance in vertical installations. Provides three
points of protection on both ends of the motor
Special Voltage
• Colored, non-wicking leads for easy connection and installation
Motors
• Chemical and abrasion resistant lead markers
• 360° rotatable round conduit box for convenient wire placement
• Conduit box lead hole location rotatable on TEFC designs
• NEMA Premium efficiency - 1 HP and above
Purpose Motors
• IP69 certified enclosure protection
Definite
Electrical Performance and Protection Features:
• Fully encapsulated internal epoxy encapsulation —including both endbells— reduces air pockets where
condensation can occur. Points of entry for contaminants are minimized, and drain plugs and breathers
are eliminated.
Brake Motors
• Our exclusive IRIS® inverter rated insulation system provides extra protection and long life, especially
when used in applications driven by an inverter
• 10:1 constant torque operation
Features:
Washguard
1/2 1800 S56C 103411.00 √ 1,744 CZ4T17TK1 33 208-230/460 1.8 76.0 1.15 11.49 S, US, 12
Motors
1/2 1800 56C 117119.00 √ 1,855 CZ6T17TK1 44 208-230/460 1.6 78.5 1.15 10.97 S, US, 12
1/2 1200 56C 119266.00 √ 1.979 CZ6T11TK1 43 208-230/460 2.3 77.0 1.15 11.71 S, US, 12
3/4 3600 56C 117120.00 √ 1,825 CZ6T34TK2 49 208-230/460 2.4 84.0 1.15 10.72 S, US, 12
3/4 1800 S56C 103412.00 √ 1,855 CZ4T17UK1 39 208-230/460 2.4 77.0 1.15 12.50 S, US, 13
3/4 1800 56C 117121.00 √ 1,925 CZ6T17TK2 47 208-230/460 2.3 80.0 1.15 11.47 S, US, 12
3/4 1200 56C 119267.00 √ 2,045 CZ6T11TK2 50 208-230/460 3.0 78.5 1.15 13.21 S, US, 12
Purpose Motors
1 3600 56C 117122.00 √ 1,959 CZ6T34TK3 48 230/460 2.6 77.0 1.15 11.22 S, US, 12
Definite
1 1800 56C 119975.00 √ 2,135 CZ6T17TK5 53 230/460 2.8 85.5 1.15 13.21 S, US, 12
1 1800 56C 119511.00 √ 2,135 CZ6T17UK1 53 208-230/460 3.2 85.5 1.15 11.94 S, US, 13
1 1800 143TC 122219.00 √ 2,164 CZ145T17WK2 55 208-230/460 3.2 85.5 1.15 12.50 S, US, 13
1 1200 56C 119513.00 √ 2,343 CZ6T11UK1 58 230/460 3.8 82.5 1.15 12.69 S, US, 13
1 1⁄2 3600 143TC G121748.00 D — CZ143T34WK4 54 230/460 4.0 82.5 1.15 11.25 S, US, 13
1 1⁄2 3600 143TC 121879.00 √ 2,224 CZ143T34UK1 54 230/460 4.0 84.0 1.15 11.75 S, US, 13
Brake Motors
1 1⁄2 1800 56C 119522.00 √ 2,204 CZ6T17UK2 58 230/460 4.8 86.5 1.15 12.44 S, US, 13
1 1⁄2 1800 145TC 121880.00 √ 2,216 CZ143T17UK1 58 230/460 4.8 86.5 1.15 12.75 S, US, 13
2 3600 145TC 121881.00 √ 2,570 CZ145T34UK1 62 230/460 4.8 85.5 1.15 12.75 S, US, 13
2 1800 56HC 119523.00 √ 2,585 CZ6T17UK3 63 208-230/460 5.8 86.5 1.15 13.19 S, US, 13
2 1800 145TC 121882.00 √ 2,598 CZ145T17UK1 64 230/460 5.8 86.5 1.15 13.25 S, US, 13
3 3600 56C 119526.00 √ 2,660 CZ6T34UK1 65 230/460 8.0 86.5 1.15 12.94 S, US, 13
3 3600 184TC 132646.00 √ 3,112 C182T34UK1 85 230/460 7.6 86.5 1.15 -- S, MX, 13
3 1800 184TC 132647.00 √ 3,103 C182T17UK1 90 230/460 7.8 89.5 1.15 15.78 S, MX, 13
IEC Motors
5 3600 184TC 132648.00 √ 3,117 C184T34UK1 103 230/460 12.4 88.5 1.15 15.78 S, MX, 13
5 1800 184TC 132649.00 √ 3,111 CZ184T17UK1 101 230/460 12.6 89.5 1.15 15.78 S, MX, 13
7 1/2 3600 213TC 141409.00 √ 4,167 C213T17UK1 168 230/460 18.6 89.5 1.15 -- S, MX, 13
7 1/2 1800 213TC 141410.00 √ 4,477 C213T17UK1 173 230/460 19.2 91.7 1.15 -- S, MX, 13
10 3600 215TC 141411.00 √ 4,482 C215T34UK1 182 230/460 23.6 90.2 1.15 19.18 S, MX, 13
10 1800 215TC 141412.00 √ 5,007 CZ215T17UK1 203 230/460 26.4 91.7 1.15 19.18 S, MX, 13
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
DC Motors
Motors
Pump
Winner
2015
Three Phase - Standard & NEMA® Premium Ratings
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
Motors
1/3 1800 48C 103417.00 √ 1,769 CZ4T17TC2 31 208-230/460 1.3 70.5 1.15 9.58 S, US, 12
1/2 3600 56C 117126.00 √ 1,876 CZ6T34TC1 38 208-230/460 1.6 82.5 1.15 10.47 S, US, 12
1/2 1800 48C 103418.00 √ 1,842 CZ4T17TC3 41 208-230/460 1.8 76.0 1.15 11.33 S, US, 12
1/2 1800 S56C 103413.00 √ 1,637 CZ4T17TC1 32 208-230/460 1.8 76.0 1.15 11.49 S, US, 12
1/2 1800 56C 117127.00 √ 1,820 CZ6T17TC1 43 208-230/460 1.6 78.5 1.15 10.97 S, US, 12
3/4 3600 56C 117128.00 √ 1,789 CZ6T34TC2 45 208-230/460 2.4 84.0 1.15 10.72 S, US, 12
Duty Motors
3/4 1800 S56C 103414.00 C/A 1,737 CZ4T17UC1 38 208-230/460 2.4 77.0 1.15 12.50 S, US, 13
Agricultural
3/4 1800 56C 117129.00 √ 1,893 CZ6T17TC2 46 208-230/460 2.3 80.0 1.15 11.47 S, US, 12
1 3600 56C 117130.00 √ 1,923 CZ6T34TC3 47 230/460 2.6 77.0 1.15 11.22 S, US, 12
1 1800 56C 119976.00 √ 2,133 CZ6T17TC3 54 230/460 2.8 85.5 1.15 13.22 S, US, 12
1 1800 56C 119512.00 √ 2,133 CZ6T17UC1 53 208-230/460 3.2 85.5 1.15 11.94 S, US, 13
1 1⁄2 3600 143TC 121908.00 √ 2,187 CZ143T34UC1 53 230/460 4.0 84.0 1.15 11.69 S, US, 13
1 1⁄2 1800 56C 119520.00 √ 2,175 CZ6T17UC2 55 208-230/460 4.8 86.5 1.15 12.22 S, US, 13
1 1⁄2 1800 145TC 121909.00 √ 2,182 CZ143T17UC1 55 230/460 4.8 86.5 1.15 12.69 S, US, 13
HVAC / Fan
Motors
2 3600 145TC 121910.00 √ 2,534 CZ145T34UC1 55 230/460 4.8 85.5 1.15 12.69 S, US, 13
2 1800 145TC 121911.00 √ 2,562 CZ145T17UC1 56 230/460 5.8 86.5 1.15 13.19 S, US, 13
2 1800 56C 119524.00 √ 2,550 CZ6T17UC3 60 208-230/460 5.8 86.5 1.15 13.19 S, US, 13
3 3600 56C 119525.00 √ 2,639 CZ6T34UC1 61 208-230/460 8.0 86.5 1.15 12.94 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Note 12 - TENV
Special Voltage
Note 13 - TEFC
Motors
Q-Car™ Replacement Kits - Extreme Duck Ultra Motors
Kit makes replacing worn bearings ultra simple. No special tools, no damaged seals.
Features:
Purpose Motors
• The kit ensures a perfectly fitted and
Definite
watertight bearing with no additional
machining required in a matter of minutes
• Maintains factory IP69 rating
• Easily replaced in the field reducing costly
downtime
Brake Motors
List
Kit # Motor where used Kit Descritopn Price
176250.00 117119.00, 117127.00 1/2 HP, 1800RPM, 56 FR - TENV design $362
176294.00 117118.00, 117126.00 1/2 HP, 3600RPM, 56C FR - TENV design $362
176295.00 117120.00, 117128.00 3/4 HP, 3600RPM, 56C FR - TENV design $362
176251.00 117121.00, 117129.00 3/4 HP, 1800RPM, 56 FR - TENV design $362
176297.00 103414.00 3/4 HP, 1800RPM, S56C FR - TEFC design $362
176252.00 117122.00, 117130.00 1 HP, 3600RPM 56 FR - TENV design $356
IEC Motors
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
1/2 1800 56C 117906.00 √ 1,958 CZ6T17TK3 40 208-230/460 1.6 78.5 1.15 10.97 S, US, 12
3/4 1800 56C 117907.00 √ 2,027 CZ6T17TK4 47 208-230/460 2.3 80.0 1.15 11.47 S, US, 12
1 1800 56C 119527.00 √ 2,216 CZ6T17UK4 55 208-230/460 3.2 85.5 1.15 11.97 S, US, 12
Duty Motors
Agricultural
1 1⁄2 1800 56C 119528.00 √ 2,264 CZ6T17UK5 58 230/460 4.8 85.5 1.15 12.69 S, US, 13
1 1⁄2 1800 143TC 122221.00 √ 2,279 CZ143T17UK3 59 230/460 4.8 86.5 1.15 12.75 S, US, 13
2 1800 56C 119529.00 √ 2,873 CZ6T17UK6 61 230/460 5.8 86.5 1.15 13.19 S, US, 13
2 1800 145TC 122222.00 √ 2,873 CZ145T17UK2 62 208-230/460 5.8 86.5 1.15 13.25 S, US, 13
3 3600 56C 119530.00 √ 2,758 CZ6T34UK2 61 230/460 8.0 86.5 1.15 13.19 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
HVAC / Fan
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Eff. Factor (Inches) Notes
Motors
3 3600 56C 119531.00 √ 2,738 CZ6T34UC2 62 230/460 8.0 86.5 1.15 13.19 S, US, 13
3 1800 145TC 122118.00 D 2,682 CZ145T17WC42 63 208-230/460 8.6 82.5 1.15 13.19 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
Note 13 - TEFC
Note: No Premium Eff. replacement for 122118.00
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
188
Aegis is believed to be the trademark of IllinoisTool Works Inc.,
and are not owned or controlled by Regal Beloit Corporation.
NOTHING SHEDS WATER LIKE A DUCK.
LEESON WASHGUARD INDUSTRIAL-DUTY MOTORS.
® ®
Applications:
For use where exposure to water, dust and dirt exists. Ideally suited for use in farm / ag
Special Voltage
equipment such as feeders, conveyors, fans, grain elevators, silo unloaders, and other
Motors
Motors
Pump
Features:
• Up to 22% higher efficiency than standard ag motors
• Sealed bearings
• Shaft flinger - output shaft
• High starting torque
Washguard
Motors
• Manual overload protected
• Weep holes provide condensation drains
Duty Motors
Agricultural
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Eff Factor (Inches) Notes
1/3 1800 56 117689.00 √ 624 M6K17FB56 27 115/208-230 Man. 1.7 76.0 1.15 10.99 S, US, 53
1/2 1800 56 117690.00 √ 777 M6K17FB57 30 115/208-230 Man. 2.5 78.0 1.15 11.49 S, US, 53
3/4 1800 56 117691.00 √ 860 M6K17FB60 35 115/208-230 Man. 3.2 82.0 1.15 11.99 S, US, 53
1 1800 56 117692.00 √ 969 M6K17FB58 37 115/208-230 Man. 4.2 83.0 1.15 12.49 S, US, 53
1 1800 143T 121973.00 √ 982 M143K17FB3 38 115/208-230 Man. 4.2 83.0 1.15 12.93 S, US, 53
1 1/2 1800 56H 117693.00 √ 1,102 M6K17FB59 43 115/208-230 Man. 6.5 84.0 1.15 13.49 S, US, 53
HVAC / Fan
1 1/2 1800 145T 121974.00 √ 1,121 M143K17FB4 44 115/208-230 Man. 6.5 84.0 1.15 13.93 S, US, 53
Motors
2 1800 145T 121975.00 √ 1,519 M145K17FB29 49 230 Man. 8.2 85.0 1.15 14.43 S, US, 53
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Three Phase Ag Duty Motors - Eco Ag® Designs
Motors
Features:
• Premium efficient designs
• Double sealed ball bearings
• Shaft flinger - output shaft
Purpose Motors
• Normally closed thermostat protected
Definite
• Weep holes provide condensation drains
RPM NEMA Catalog List Wgt. load Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Eff Factor (Inches) Notes
Brake Motors
1/2 1800 56 117772.00 √ 696 C6T17FB163 30 208-230/460 T-stat 1.6 80.0 1.25 10.98 S, US
3/4 1800 56 117759.00 √ 762 C6T17FB160 31 208-230/460 T-stat 2.4 81.5 1.25 11.48 S, US
1 1800 56 117760.00 √ 934 C6T17FB161 34 230/460 T-stat 3.2 85.5 1.25 12.48 S, US
1 1/2 1800 56H 117761.00 √ 951 C6T17FB162 39 230/460 T-stat 4.8 86.5 1.25 12.98 S, US
1 1/2 1800 145T 121997.00 √ 967 C145T17FB98 41 230/460 T-stat 4.8 86.5 1.15 12.98 S, US
2 1800 145T 121998.00 √ 1,007 C145T17FB99 45 230/460 T-stat 5.8 86.5 1.15 13.98 S, US
3 1800 184T 132328.00 √ 1,136 C182T17FB54 80 230/460 T-stat 7.8 89.5 1.15 13.96 S, MX
IEC Motors
5 1800 184T 132329.00 √ 1,248 C184T17FB67 94 230/460 T-stat 12.6 89.5 1.15 14.96 S, MX
7 1/2 1800 213T 141145.00 √ 1,598 C213T17FB22 159 230/460 T-stat 21.6 91.7 1.25 18.70 S, MX
10 1800 215T 141146.00 √ 1,932 C215T17FB23 176 230/460 T-stat 26.8 91.7 1.25 19.70 S, MX
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
DC Motors
191
Agricultural Duty Motors
High Torque - General Purpose
Motors
Pump
Washguard
Stock
RPM NEMA Catalog List Wgt. load Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1/3 1800 56 113256.00 √ 570 M6C17FB66 23 115/208-230 Man. 3.2 1.15 10.48 S, US
1/3 1800 56 LM24789 √ 574 SRF4S0.33T1C6028AP7TP1 24 115/208-230 Man. 3.3 1.15 11.82 S, MX
1/2 1800 56 110086.00 √ 662 M6C17FB11 25 115/208-230 Man. 4.4 1.15 10.48 S, US
Duty Motors
Agricultural
1/2 1800 56 LM24790 √ 674 SRF4S0.5T1C6028AP7TP1 25 115/208-230 Man. 4.4 1.15 11.82 S, MX
3/4 1800 56 110087.00 √ 783 M6C17FB9 29 115/208-230 Man. 5.4 1.15 11.48 S, US
3/4 1800 56 LM24791 √ 792 SRF4S0.75T1C6028AP7TP1 30 115/208-230 Man. 5.5 1.15 12.32 S, MX
1 1800 56 110088.00 √ 899 M6C17FB10 33 115/208-230 Man. 7.0 1.15 11.98 S, US
1 1800 56 LM24792 √ 905 SRF4S1T1C6028AP7TP1 32 115/208-230 Man. 6.7 1.15 12.82 S, MX
1 1800 143T 121569.00 √ 905 M143C17FB13 33 115/208-230 Man. 7.0 1.15 12.93 S, US
1 1800 143T LM24793 √ 927 SSF4S1T1C6028AP7TP1 33 115/208-230 Man. 6.7 1.15 12.87 S, MX
HVAC / Fan
1 1/2 1800 56H 110089.00 √ 1,003 M6K17FB3 40 115/208-230 Man. 8.6 1.15 12.99 S, US
Motors
1 1/2 1800 56H LM24794 √ 1,022 SRF4S1.5T1B6028AP7TP1 41 115/208-230 Man. 7.6 1.15 13.82 S, MX
1 1/2 1800 56HZ 113938.00 √ 1,021 M6K17FB39 42 115/208-230 Man. 8.6 1.15 13.43 S, US, 3, 53
1 1/2 1800 145T LM24795 √ 1,110 SSF4S1.5T1B6028AP7TP1 41 115/208-230 Man. 7.6 1.15 13.87 S, MX
2 1800 56HZ 110090.00 √ 1,438 M6K17FB4 46 230 Man. 9.2 1.15 13.93 S, US, 3, 53
2 1800 182T 131541.00 √ 1,532 P182C17FB12 65 115/208-230 Man. 12.4 1.15 14.46 S, MX
3 1800 184T 131542.00 √ 1,604 P184C17FB13 86 230 Man. 19.0 1.15 16.46 S, MX
Special Voltage
3 1800 184T LM24797 √ 1,565 SS184F4S3T1C66AP7TP1 88 230 Man. 19.0 1.00 16.46 S, MX
Motors
5 1800 184T 131543.00 √ 2,012 P184K17FB16 98 230 Man. 20.5 1.15 17.46 S, MX, 53
5 1800 184T LM24798 C/A 2,048 SSF4S5T1B66AP71TP1 75 230 Man. 20.5 1.15 17.46 S, MX, 53
7 1/2 1800 215T 140707.00 √ 2,403 P215K17FB15 157 230 Man. 32.0 1.15 20.21 S, MX, 53
7 1/2 1800 215T LM24799 √ 2,525 SS215F4S7.5T1B66AP7TP1 137 230 Man. 30.0 1.15 21.09 S, MX, 53
10 1800 215T 140706.00 √ 2,815 P215K17FB16 155 230 Man. 40.0 1.15 20.71 S, MX, 53
Purpose Motors
192
Agricultural Duty Motors
Hi-Torque and Extra Hi-Torque
Motors
Pump
Washguard
Motors
Single Phase - TEFC - Rigid Base - Extra Hi-Torque - 5, 7 1/2 & 10 HP
SYN App. Over- F. L. “C”
RPM NEMA Catalog Stock List Wgt. load Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
2 1800 182T 131541.00 √ 1,532 P182C17FB12 65 115/208-230 Man. 12.4 1.15 14.46 S, MX
Duty Motors
Agricultural
3 1800 184T 131542.00 √ 1,604 P184C17FB13 86 230 Man. 19.0 1.15 16.46 S, MX
5 1800 184T LM24802 √ 1,976 SSF4S5TB6008AP8TP1 139 208-230 Man. 22.5 1.15 17.46 S, MX
5 1800 213TZ LM24803 √ 2,407 SS213F4S5TZB66AP8TP1-1 115 230 Man. 22.6 1.15 18.34 S, MX, 53
5 1800 215T 140203.00 D 2,451 P215K17FB3 122 230 Man. 24.0 1.15 18.71 S, MX, 53
5 1800 215T 141433.00 √ 2,451 P215K17FB82 125 230 Man. 22.6 1.15 18.71 S, MX, 53
5 1800 215TZ 140223.00 D 2,454 P215K17FB5 153 230 Man. 24.0 1.15 18.71 S, MX, 4, 53
5 1800 215TZ 141432.00 √ 2,454 P215K17FB81 153 230 Man. 22.6 1.15 18.71 S, MX, 4, 53
HVAC / Fan
7 1⁄2 1800 215T 140130.00 D 2,620 P215K17FB2 144 230 Man. 33.6 1.15 20.21 S, MX, 53
Motors
7 1⁄2 1800 215T 141434.00 √ 2,474 P215K17FB78 152 230 Man. 30.5 1.15 21.09 S, MX, 53
7 1⁄2 1800 215TZ 140209.00 D 2,823 P215K17FB4 159 230 Man. 33.6 1.15 20.21 S, MX, 4, 53
7 1⁄2 1800 215TZ 141427.00 √ 2,823 P215K17FB79 159 230 Man. 30.5 1.15 21.09 S, MX, 4, 53
7 1⁄2 1800 215TZ LM24804 √ 2,674 SS215F4S7.5TZ1B66AP8TP1-1 144 230 Man. 30.5 1.15 21.09 S, MX, 53
10 1800 215T 140414.00 √ 3,071 P215K17FB6 156 230 Man. 40.0 1.15 20.71 S, MX, 53
10 1800 215T LM24805 √ 3,016 SSF4S10T1B66AP8TP1 152 230 Man. 40.0 1.00 21.48 S, MX, 53
Special Voltage
Note listing on inside back flap
Motors
Specifications are subject to change without notice
Purpose Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1/3 1800 56C 113290.00 √ 753 M6C17FC59 26 115/208-230 Man. 3.2 1.15 10.98 S, US
Definite
1/2 1800 56C 110492.00 √ 861 M6C17FC12 24 115/208-230 Man. 4.4 1.15 10.98 S, US
3/4 1800 56C 110493.00 √ 1,008 M6C17FC13 28 115/208-230 Man. 5.4 1.15 11.48 S, US
1 1800 56C 110494.00 √ 1,143 M6C17FC14 36 115/208-230 Man. 7.0 1.15 11.98 S, US
1 1⁄2 1800 56C 110495.00 √ 1,298 M6K17FC3 40 115/208-230 Man. 8.6 1.15 12.99 S, US, 53
2 1800 145TC 120855.00 √ 1,686 M145K17FC13 45 230 Man. 9.2 1.15 14.18 S, US, 53
3 1800 184TC 131603.00 √ 2,285 P184C17FC5 107 230 Man. 19.0 1.15 16.44 S, MX
Brake Motors
5 1800 184TC 131602.00 √ 2,804 P184K17FC7 107 230 Man. 20.5 1.15 17.44 S, MX, 53
Note listing on inside back flap
Specifications are subject to change without notice
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1/3 1800 56C 116485.00 √ 846 M6C17FK81 29 115/208-230 Man. 3.2 1.15 10.99 S, US
1/2 1800 56C 116486.00 √ 895 M6C17FK80 30 115/208-230 Man. 4.4 1.15 10.99 S, US
3/4 1800 56C 116487.00 √ 1,040 M6C17FK79 30 115/208-230 Man. 5.4 1.15 11.49 S, US
1 1800 56C 116488.00 √ 1,181 M6C17FK78 34 115/208-230 Man. 7.0 1.15 11.99 S, US
1 1⁄2 1800 56HC 116489.00 √ 1,329 M6K17FK47 44 115/208-230 Man. 8.6 1.15 12.99 S, US, 53
2 1800 145TC 121625.00 √ 1,693 M145K17FK11 46 230 Man. 9.2 1.15 14.18 S, US, 53
DC Motors
3 1800 184TC 131994.00 √ 2,328 P184C17FK10 105 230 Man. 19.0 1.15 16.47 S, MX
5 1800 184TC 131995.00 √ 2,817 P184K17FK13 105 230 Man. 20.5 1.15 17.47 S, MX, 53
Note listing on inside back flap
Specifications are subject to change without notice
193
Agricultural Duty Motors
Fan Duty - Single and Three Phase
Motors
Pump
Two-Winding Variable Torque PSC Type For Shaft Mounted Fan Application
Features:
• Variable torque
• PSC type for shaft mounted fan applications
Washguard
1/3 1625 S56H 100767.00 √ 530 A4P17NJ1 22 115/230 Auto. 1.6 1.0 10.31 S, MX, 34
Motors
1/3 1625 56HY 111348.00 √ 577 A6P17NZ6 24 115/230 Auto. 1.7 1.0 12.94 S, US, 59
1/3 1075 48Z 100825.00 √ 541 A4P11NR3 25 115/230 Auto. 1.8 1.0 11.16 S, MX, 16, 34
1/3 1075 S56HZ 100806.00 √ 581 A4P11NJ2 27 115/230 Auto. 1.8 1.0 11.56 S, MX, 17, 34
1/2 1625 56HZ 111323.00 √ 660 A6P17NR3 30 115/230 Auto. 2.6 1.0 12.60 S, US, 17, 34
1/2 1625 S56H 100768.00 √ 544 A4P17NJ2 36 115/230 Auto. 2.2 1.0 10.81 S, MX, 34
1/2 1075 48Z 101645.00 √ 585 A4P11NR6 33 115/230 Auto. 2.8 1.0 11.16 S, MX, 16, 34
Special Voltage
1/2 1075 56HZ 111321.00 √ 685 A6P11NR1 37 115/230 Auto. 3.0 1.0 13.60 S, US, 17, 34
Motors
1/2 850 48YZ A099836.00 √ 589 A48P8NR2 24 115/230 Auto. 3.0 1.15 10.81 S, MX, 19, 34, 50
1/2 825 56HZ 111919.00 √ 768 A6P8NR2 43 115/230 Auto. 3.2 1.0 13.60 S, US, 17, 34, 50
3/4 1625 56HZ 111324.00 √ 722 A6P17NR4 37 115/230 Auto. 3.5 1.0 13.10 S, US, 17
3/4 1625 56H 111266.00 √ 722 A6P17NR1 39 115/230 Auto. 3.5 1.0 12.31 S, US
3/4 1075 56HZ 111322.00 √ 776 A6P11NR2 47 115/230 Auto. 4.0 1.0 14.10 S, US, 17, 50
1 1625 56HZ 111267.00 √ 807 A6P17NR2 39 115/230 Auto. 4.4 1.0 12.81 S, US
Purpose Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1/4 1750 48Y 101252.00 √ 420 A4P17NB27 19 115/208-230 Auto. 1.5 1.0 10.40 S, MX, 50
1/4 1625 48Y 100699.00 √ 420 A4P17NB7 19 115/230 Auto. 1.4 1.0 10.65 S, MX
1/4 1075 48Y M099260.00 √ 438 A4P11NB23 21 115/230 Auto. 1.2 1.0 11.55 S, CN
1/4 1075 48Y A099260.00 √ 438 A4P11NB52 21 115/230 Auto. 1.5 1.0 10.65 S, MX
1/3 1750 48Y 101253.00 √ 477 A4P17NB28 22 115/208-230 Auto. 1.9 1.0 10.65 S, MX, 50
1/3 1625 48Y 100700.00 √ 477 A4P17NB8 22 115/230 Auto. 1.6 1.0 10.65 S, MX
1/3 1625 56Y 111202.00 √ 550 A6P17NZ1 24 115/230 Auto. 1.7 1.0 12.05 S, US, 58
IEC Motors
1/3 1140 S56Y 100604.00 √ 517 A4P11NH1 23 115/208-230 Auto. 1.8 1.0 11.40 S, MX
1/3 1075 48Y M099261.00 √ 517 A4P11NB24 21 115/230 Auto. 1.5 1.0 12.55 S, CN
1/3 1075 48Y A099261.00 √ 556 A4P11NB53 21 115/230 Auto. 1.8 1.0 10.90 S, MX
1/2 1750 S56Y 101176.00 √ 524 A4K17NH2 26 115/230 Auto. 3.5 1.0 10.40 S, MX, 50, 54
1/2 1750 48Y 100701.00 √ 511 A4P17NB9 29 115/230 Auto. 2.5 1.0 12.15 S, MX
1/2 1075 48Y A099946.00 √ 536 A4P11NB54 26 115/230 Auto. 2.5 1.0 11.90 S, MX
3/4 1075 56HZ A099847.00 √ 765 A6P11NB5 35 115/230 Auto. 3.7 1.0 12.19 S, MX
DC Motors
194
Agricultural Duty Motors
Lincoln Motors™ Agricultural Fan Motors
Motors
Pump
Typically used in poultry houses or barn exhaust fans
Features:
• TEAO designs - continuous duty
• Extended thru-bolts
Washguard
• 1/2” dia. x 2 1/2” long shaft with flats, 90º apart
Motors
• Fully gasketed
• Automatic overload protected
• Must be mounted in airstream for proper cooling
Duty Motors
Agricultural
SYN App. Over- F. L. “C”
Stock
HVAC / Fan
1/3 1075 48Z LM24443 √ 813 SPA6S0.33TZRY1A6027AP10-1 22 115/230 Auto. 2.1 1.0 10.84 S, MX
Motors
1/2 1625 48Z LM24446 √ 860 SPA4S0.5TZRY1A6027AP11-1 23 115/230 Auto. 2.7 1.0 11.81 S, MX
1/2 1625 48Z LM24449 √ 722 SPA4S0.5TZRY1A6027AP10-1 21 115/230 Auto. 3.0 1.0 10.84 S, MX
1/2 1075 48Z LM24444 √ 860 SPA6S0.5TZRY1A6027AP10-1 20 115/230 Auto. 3.2 1.0 10.84 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
Aeration Fan Motors
Features:
• Belt driven fans or fan on shaft applications
Purpose Motors
• Capacitor start designs
• Must be mounted in airstream for proper cooling
Definite
• Epoxy paint to resist corrosion
• Single-phase models have built-in terminal boards
Brake Motors
Stock
195
Agricultural Duty Motors
Aeration Fan Motors
Motors
Pump
Features:
• Belt driven fans or fan on shaft applications
• Must be mounted in airstream for proper cooling
Washguard
Stock
RPM NEMA Catalog List Wgt. Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230V Factor (Inches) Notes
3/4 3450 56Z 111334.00 √ 611 C6T34NB18 24 208-230/460 2.4 1.0 9.90 S, US, 22
Duty Motors
Agricultural
1 3450 56Z 111335.00 √ 609 C6T34NB19 25 208-230/460 3.2 1.0 9.90 S, US, 22
1 1⁄2 3450 143TZ 120377.00 √ 699 C143T34NB2 34 208-230/460 4.2 1.0 11.34 S, US, 22
2 3450 145TZ 120378.00 √ 828 C145T34NB1 35 208-230/460 5.6 1.0 11.84 S, US, 22
3 3450 145T 120379.00 √ 929 C145T34NB2 41 230/460 7.6 1.0 12.34 S, US, 23
Features:
Special Voltage
• 268% starting torque • Rolled steel frame with cast iron endbells
• Oversized sealed bearings • Epoxy painted
Motors
Stock
16 1800 256TZ 851034.00 √ 4,441 C254K17DB1 308 208-230 61.0 1.15 25.52 S, MX
Note listing on inside back flap
Specifications are subject to change without notice
Features:
• Epoxy paint for corrosion resistants
• Non-NEMA shaft extension
• Class “F” Insulation System
196
Agricultural Duty Motors
Crop Dryer Motors
Motors
Pump
Used on crop dryers with air over/fan on shaft designs
Features:
• Class “F” insulation system • Capacitors shipped loose on
• Overload protected 1-phase 215 TZ designs
Washguard
• Keyed shaft with 1/4-20 UNC • Motor venting protected against
Motors
tapped hole on end insects and rodents
• 34” long leads • Double sealed ball bearings
Duty Motors
Stock
Agricultural
RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230V Factor (Inches) Notes
3-4 1/2 3600 145TZ LM24778 √ 1,467 SSD2S3-4.5TZ1B66QS10-1 46 230 Auto 12.5-19.1 1.50 13.74 S, MX
5-7 3600 182TZ 131847.00 √ 1,723 C182C34DB2 94 230 T-Stat 26.8-35.3 1.00 16.44 S, MX
7 1/2-10 3600 182TZ 131848.00 √ 1,915 C182K34DB4 98 230 T-Stat 31-42 1.00 16.44 S, MX
7 - 10 3600 184TZ LM24780 √ 2,399 SSD2S7-10TZ1B66QS11-1 102 230 T-Stat 31-47 1.40 15.94 S, MX
7- 9 3600 184TZ LM24781 C/A 1,943 SSD2S7-9TZ1C66QSS11-1 180 230 T-Stat 36-45 1.30 15.50 S, MX
10 - 15 3600 215TZ 140640.00 √ 2,943 C215K34DB2 162 230 T-Stat 39.5-61.5 1.00 20.42 S, MX
HVAC / Fan
10 - 15 3600 215TZ LM24782 √ 3,047 SS215D2S10-15TZ1C66QS11-1 184 230 T-Stat 46-71 1.50 18.16 S, MX
Motors
10 - 15 3600 215TZ 141084.00 √ 2,943 C215K34DB3 159 230 T-Stat 40-59 1.00 20.08 S, MX, 52
Note 52 - Extra High Starting Torque Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Special Voltage
Motors
Grain Dryer / Centrifugal Fan Motor
Features:
• 335% starting torque & 89% efficient • Rolled steel with cast
• Oversized sealed bearings iron endbells
Purpose Motors
• Epoxy paint • Colored leads
Definite
Single Phase - TEFC - 230 Volt - Rigid Base
SYN App. F. L. “C”
Stock
Brake Motors
Note listing on inside back flap
Specifications are subject to change without notice
197
Agricultural Duty Motors
Crop Dryer / Centrifugal Motors
Motors
Pump
Centrifugal Fan
Washguard
Motors
Features:
• Epoxy paint for corrosion resistants
• TZ Shafts are 1” longer than NEMA
• Class “F” Insulation System
NEW!
Duty Motors
Agricultural
10 3600 215T 141394.00 √ 2,742 C215K34FB2 142 208-230 41.5 1.00 19.84 S, MX
Motors
10 1800 215T 141393.00 √ 2,815 C215K17FB75 156 230 40.0 1.00 22.97 S, MX
Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Features:
• 1” longer shaft than NEMA standard • Epoxy paint for corrosion resistants
• 1/4-20 tapped and keyed shaft • Normally closed thermostats
NEW!
Purpose Motors
RPM NEMA Catalog List Wgt. Over- load Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1 1/2 3600 145TZ 122412.00 √ 828 C145C34NB2 44 230 T-Stat 8.4 1.0 12.46 S, US
Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
Crop Dryer
Features:
• 3/4” longer shaft than NEMA standard • Normally closed thermostats
• 1/4-20 tapped and keyed shaft • Epoxy paint for corrosion resistants
IEC Motors
RPM NEMA Catalog List Wgt. Over- load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230V Factor (Inches) Notes
5-7 3600 184TZ 132636.00 √ 1,723 C184P34DB1 94 230 T-Stat 21.3-29 1.0 16.82 S, MX
DC Motors
7 1/2 3600 184TZ 132637.00 √ 1,915 C184P34DB2 98 230 T-Stat 31-40 1.0 16.82 S, MX
10-15 3600 215Z 141385.00 √ 2,943 C215P34DB1 162 230 T-Stat 40.4-57.5 1.5 20.82 S, MX
198
Agricultural Duty Motors
Grain Dryer / Centrifugal Fan Motor
Motors
Pump
Washguard
Motors
Single Phase - TEFC - Rigid Base
SYN App. Over- F. L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230V Factor (Inches) Notes
7 1⁄2 1800 215TZ 141348.00 D 2,823 C215K17FB74 157 230 Man. 30.0 1.15 20.21 S, MX
Duty Motors
Agricultural
7 1⁄2 1800 215TZ 141437.00 √ 2,823 C215K17FZ15 157 230 Man. 30.5 1.15 22.47 S, MX
10 1800 215T 141311.00 √ 3,071 C215K17FB73 163 230 Man. 40.0 1.15 21.72 S, MX
Specially designed for crop dryer applications that Note listing on inside back flap
have a vibration dampening centrifugal switch Specifications are subject to change without notice
HVAC / Fan
Motors
Special Voltage
Motors
Three Phase - TEAO - Rigid Base NEW!
SYN App. Over- “C”
Stock
Purpose Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
5-7 3600 184TZ 132393.00 √ 1,451 C184T34NB3 100 208-230/460 T-Stat 16.5 1.00 15.38 S, MX
Definite
7 1/2 - 10 3600 184TZ 132394.00 √ 1,618 C184T34NB4 107 208-230/460 T-Stat 24.8 1.00 17.38 S, MX
Brake Motors
IEC Motors
3-4 1/2 3600 145TZ 122122.00 √ 1,214 C145K34NB6 50 230 T-Stat 11.8-18.3 1.00 14.46 S, US, 53
5-7 3600 182TZ 132391.00 √ 1,533 C182K34NB106 102 230 T-Stat 20.8-28.6 1.00 17.44 S, MX, 53
7 1/2-10 3600 182TZ 132392.00 √ 1,782 C182K34NB107 108 230 T-Stat 30-38 1.00 17.44 S, MX, 53
10-15 3600 215TZ 141220.00 √ 2,234 C215K34NB73 158 230 T-Stat 45.8-68.5 1.50 18.17 S, MX, 53
amp listing is at higher HP Note listing on inside back flap
Specifications are subject to change without notice
199
Agricultural Duty Motors
Grain Dryer / Centrifugal Fan Motors
Motors
Pump
Features:
Washguard
Motors
• NEMA® Premium and EPAct efficiency • 1” longer shaft than NEMA standard
• Rodent screens • Inverter duty insulation system
• Re-greasable bearings • UL Recognized and CSA certified
• Cast Iron construction
20 1800 256TZ 171863.60 √ 3,187 C256T17DB15 324 230/460 51.0 93.0 23.62 C, CN
Motors
25 1800 284TZ 171864.60 √ 4,199 C284T17DB15 404 230/460 59.5 93.6 24.92 C, CN
30 1800 286T 170542.60 D 4,291 C286T17DB13 471 230/460 71.0 94.1 25.00 C, CN
30 1800 286TZ 171865.60 √ 4,291 C286T17DB16 471 230/460 71.0 94.1 26.57 C, CN
Features:
• 1” longer shaft than NEMA standard • Premium efficient
• Shaft seals both ends • N/C T-stats
• Epoxy painted
NEW!
Brake Motors
10 1800 215TZ 171848.60 √ 2,233 C215T17FK48 188 230/460 25.0 91.7 21.10 C, CN
15 1800 254TZ 171841.60 √ 3,057 C254T17FK18 295 230/460 36.0 92.4 24.70 C, CN
20 1800 256TZ 171842.60 √ 3,901 C256T17FK18 336 230/460 49.0 93.0 26.40 C, CN
25 1800 284TZ 171843.60 √ 4,541 C284T17FK15 406 230/460 59.0 93.6 27.26 C, CN
30 1800 286TZ 171844.60 √ 5,415 C286T17FK17 456 230/460 70.0 94.1 28.83 C, CN
Motors
Pump
Used in tobacco barns and other applications that require a
fan motor in a high ambient condition
Features:
Washguard
Motors
• Drip-proof airover designs
• Class H insulation for high • 120 inch leads
ambient conditions • Oversized double sealed bearings
• 80° C ambient rated • 1/4-20 tapped hole at end of shaft
Duty Motors
Agricultural
SYN App. F. L. “C”
Stock
HVAC / Fan
Motors
Grain Stirring Motors
Used in grain stirring systems inside grain bins
Special Voltage
Features:
Motors
• TEFC designs - continuous duty • Vertical shaft up design with drain hole
• High torque designs • 7/8” Dia. shaft
• Rugged 205 bearing, shaft end
Purpose Motors
Definite
SYN App. Over- F. L. “C”
Stock
▼LM Numbers are Lincoln Models Note listing on inside back flap
Brake Motors
C/A - Check Availability Specifications are subject to change without notice
1 1⁄2 1800 56HZ 119533.00 √ 1,218 M6T17FB197 45 230/460 4.8 86.5 1.00 12.31 S, US, 53
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
DC Motors
201
Agricultural Duty Motors
Catfish Pond Motors
Motors
Pump
Features:
• High torque designs
• Epoxy painted for corrosion protection - stainless steel fan guards
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. Phase @ 230V Factor (Inches) Notes
10 1800 215TC 140705.00 √ 3,250 P215K17FK5 155 230 Man. 1 40.0 1.15 20.71 S, MX
10 1800 215TC 140833.00 C/A 1,956 C215T17FK19 182 230/460 None 3 26.8 1.15 19.71 S, MX
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Features:
• Threaded jet pump motor shaft • Epoxy painted for corrosion protection
Special Voltage
Features:
• Double-sealed ball bearings • Rain canopy protects against water
• Designed for vertical shaft down contamination
applications
IEC Motors
202
Agricultural Duty Motors
Milk Transfer Pump Motor
Motors
Pump
Features:
• Replacements for SURGETM milk pumps
• Washguard® motor features for high pressure washdown
applications
Washguard
• Epoxy painted and stainless ratings available for
Motors
corrosion protection
• Capacitor supplied loose with motor 113939.00
• Motors 119227.00 & 119231.00 are capacitor start
-induction run motors
• Solid state encapsulated starting switch on capacitor
start motors
Duty Motors
Agricultural
• Three phase motor is inverter rated
HVAC / Fan
1/2 3600 56CZ 113939.00 √ 699 C6P34NK5 42 230 4.5 1.00 13.48 S, US, 12
Motors
1 3600 56CZ 119227.00 √ 939 C6C34WK24 33 115/230 6.0 1.15 14.48 S, US, 12
1 3600 56CZ 119448.00 √ 939 C6C34WK29 33 115/230 6.0 1.15 13.04 S, US, 13
Special Voltage
Stainless - Milk Transfer Pump Motor
Motors
Single Phase - TENV - 230 Volt - C Face With Base
SYN App. F. L. “C”
Stock
Purpose Motors
Note listing on inside back flap
Definite
Specifications are subject to change without notice
Brake Motors
SYN App. F. L. “C”
Stock
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
IEC Motors
DC Motors
Features:
• Replacement motors for BouMatic® milk pumps
• Washguard® motor features for high pressure
washdown applications
Washguard
protection
• Single phase motors are capacitor start - induction run designs
• Solid state encapsulated starting switch on single phase motors
• Three phase motors are inverter rated
Duty Motors
Agricultural
1/2 3600 56CZ 119233.00 √ 699 C6C34WK27 30 115/230 3.8 1.15 12.62 S, US
Motors
230/460 volt motors are suitable for use at 208 volts Note listing on inside back flap
Brake Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230V Factor (Inches) Notes
1 3600 56J 119234.00 √ 1,013 C6C34WK28 30 115/230 6.0 1.15 12.37 S, US
204
BouMatic is believed to be the trademark of DEC International,
and are not owned or controlled by Regal Beloit Corporation.
Agricultural Duty Motors
Feed-Auger Drive Motors - Dust Tight
Motors
Pump
Replacement motors for poultry feed auger drive systems
Features:
• Choice of mechanical or solid state starting switch
Washguard
Motors
• Mechanical switch has over-speed protection - Note 51
• Manual overload protected
Duty Motors
SYN App. Over- F. L. “C”
Agricultural
Stock
HVAC / Fan
1/2 1800 48N LM24463 D 786 SPA4S0.5TADN1C6027TP1 23 115/230 Man. 3.4 1.00 11.81 S, MX, 26, 51
Motors
3/4 1800 48YZ 101119.00 √ 939 P4C17FZ6 27 115/208-230 Man. 5.4 1.00 11.47 S, MX, 26
3/4 1800 56YZ 117889.00 √ 809 117889,00 28 115/208-230 Man. 4.2 1.25 12.00 S, MX, 26, 51, 64
1 1800 56YZ 112615.00 √ 1,040 P6C17FZ27 38 115/230 Man. 7.0 1.00 11.27 S, MX, 27
1 1800 56YZ 117883.00 √ 1,013 117883,00 35 115/208-230 Man. 5.4 1.25 12.00 S, MX, 27, 51, 64
1 1⁄2 1800 56YZ 113280.00 √ 1,727 P6K17FZ6 50 115/208-230 Man. 6.5 1.00 12.77 S, US, 27, 53
1 1⁄2 1800 56YZ 117884.00 √ 1,704 117884,00 44 115/208-230 Man. 6.5 1.15 14.51 S, MX, 27, 51, 53, 64
Special Voltage
1 1⁄2 1800 56HZ 111330.00 √ 1,070 P6K17FB18 45 115/208/230 Man. 8.6 1.00 12.39 S, US, 53
Motors
1 1⁄2 1800 56NZ LM24814 D 1,474 SRF4S1.5TZADN1C6028TP1-1 41 115/208/230 Man. 7.6 1.00 14.38 S, MX, 27, 51, 53
1 1⁄2 1800 56HZ LM24521 C/A 926 SRF4S1.5TZ1B6028AP9-2 47 115/208-230 Man. 7.6 1.15 13.21 S, US, 53
Note 64 - Stub shaft on ODE for manual jogging Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
C/A - Check Availability
Purpose Motors
Definite
Single Phase - TEFC - 50 Hertz
SYN App. Over- F. L. “C”
Stock
Brake Motors
1 1800 56YZ 113906.00 √ 1,135 M6C14FZ8 42 110/220 Man. 6.4 1.00 12.27 S, MX, 27, 51
1 1⁄2 1800 56YZ 113907.00 C/A 1,897 P6K14FZ2 51 110/220 Man. 8.6 1.00 13.27 S, MX, 27, 51
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
IEC Motors
DC Motors
205
Agricultural Duty Motors
Hatchery and Incubator Fan Motors
Motors
Pump
Features:
• Automatic overload protected
• 15MFD, 370V. capacitor shipped loose with
Washguard
motor 101341.00
Motors
Stock
Agricultural
SYN RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230V Factor (Inches) Notes
1/4 1800 48Y 101341.00 √ 540 A4P17NZ24 17 115/230 Auto. 1.40 1.00 8.93 S, MX, 16, 34
1/3 1800 48Z 103878.00 √ 584 L4P17NZ149 20 115/230 Auto. 1.65 1.00 9.93 S, MX, 16, 34
1/2-2/9 1800/1200 56H 114102.00 √ 704 A6S46NR4 36 115 Auto. 9.3-5.6* 1.25 12.32 S, US
* Full Load amps are at high speed and low speeds, respectively at 115 volts Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
Features:
• Stainless steel shaft hardware
• Metric motor has phosphatized shaft drilled and tapped
• Double sealed ball bearing
• Extra high breakdown torques
Purpose Motors
Three Phase - TEFC - Rigid Base - EXTREME DUCK ULTRA - IP69 RATED
Brake Motors
F. L. F.L. “C”
Stock
2 1200 184TZ 132246.00 √ 1,703 C184T11FB24 230/460 6.4 88.5 1.50 14.96 White Epoxy
3 1800 56HZ 119783.00 √ 1,259 C6T17WK48 208-230/460 8.6 82.5 1.00 13.93 White Epoxy
3 1800 145T 121944.00 √ 1,259 C145T17FB92 208-230/460 8.6 82.5 1.00 13.72 White Epoxy
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
206
Agricultural Duty Motors
Industry-AG - High Torque
Motors
Pump
General purpose, heavy duty for industrial and agriculture applications
Features:
• Manual overload protected
• Double sealed ball bearings
• Weather resistant reset button protection
Washguard
Motors
• Capacitor start provides high starting torque
Duty Motors
Stock
Agricultural
RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230V Factor (Inches) Notes
1/3 1800 56 M002256.00 D 550 M6C17FB142 24 115-208/230 Man. 2.9 1.15 11.00 S, CN
1/3 1800 56 117862.00 √ 471 C6C17FB164 20 115-208/230 Man. 3.3 1.15 11.82 S, MX
1/2 1800 56 117863.00 √ 537 C6C17FB165 26 115-208/230 Man. 4.4 1.15 11.82 S, MX
3/4 1800 56 117864.00 √ 635 C6C17FB166 33 115-208/230 Man. 5.5 1.15 12.32 S, MX
1 1800 56 117865.00 √ 689 C6C17FB167 33 115-208/230 Man. 6.7 1.15 12.82 S, MX
1 1⁄2 1800 56H 117866.00 √ 829 C6K17FB61 50 115-208/230 Man. 7.6 1.15 13.82 S, MX
HVAC / Fan
2 1800 56HZ 117867.00 √ 949 C6K17FB62 50 115/230 Man. 9.4 1.15 14.87 S, MX
Motors
“M00” Series motors use C Face Kit M064076.00 Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
Special Voltage
SYN App. Over- F. L. “C”
Motors
Stock
Purpose Motors
Note listing on inside back flap
Definite
Specifications are subject to change without notice
Brake Motors
IEC Motors
DC Motors
207
Agricultural Duty Motors
Variable Speed - High Performance AG Fan Motors
Motors
Pump
Designed for use in agricultural fan applications where variable speed is required
Features:
• Water-tight connection end compartment
Washguard
1/2 1060 48Y A099462.00 √ 524 A4P911NZ85 26 115/230 Auto. 2.8 1.00 10.89 S, MX
Features:
• Capacitor start/capacitor run designs for high efficiency
• Mount in airstream for proper cooling
• 56H frame motors have a combination 566/140 frame stamped steel base
Purpose Motors
Definite
1 1725 56H A009782.00 √ 663 A6K17NB33 37 115/230 Auto. 3.0 1.00 12.44 S, MX
1 1⁄2 1725 56H A009594.00 √ 791 A6K17NB32 39 115/230 Auto. 4.0 1.25 11.94 S, MX
2 1725 145T A009595.00 √ 877 U145K17NB2 50 230 Auto. 9.2 1.00 13.49 S, MX *
* Frame mounted conduit box Note listing on inside back flap
Specifications are subject to change without notice
IEC Motors
DC Motors
208
Agricultural Duty Motors
Lincoln Agriculture Fan Motors™
Motors
Pump
115/230 Volts - Belt Drive - Overload Protection
Features:
• Capacitor start/capacitor run design
Washguard
• Ball bearings
Motors
• LM24777 must be mounted in airstream
Duty Motors
Agricultural
SYN App. Over- F. L. “C”
Stock
HVAC / Fan
Motors
Agriculture Fan
Direct Drive Thru-Bolt Mount
Features:
Special Voltage
• 1/2” long thru-bolts
• 48Y - 1/2” dia., 1-1/2 long shaft with flat
Motors
• 48YZ - 1/2” dia., 2-1/2” long shaft with two flats
Purpose Motors
SYN App. Over- F. L. “C”
Stock
Definite
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 115V Factor (Inches) Notes
1/4 1725 48Y LM24488 C/A 515 SPN4S0.25TZNY1S6001TP1-1 10 115 Auto 4.0 1.00 7.62 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
SYN App. Over- F. L. “C”
Stock
209
Agricultural Duty Motors
Lincoln Agriculture Fan Motors
Motors
Pump
Features:
• 115 & 230 Volts - single phase
• Extended thru-bolts on 48Z frame motors
• 48Z - 1/2 dia. shaft, 2-1/2 long with two flats
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 115V Factor (Inches) Notes
1/4 1725 48Z LM24487 C/A 537 SPA4S0.25TZRY1S6001TP2-1 17 115 Auto 3.5 1.00 17.32 S, MX
1/3 1725 48Z LM24486 √ 657 SPA4S0.33TZRY1S6001TP2-1 21 115 Auto 4.2 1.00 17.32 S, MX
1/2 1725 56Z LM24809 C/A 816 SRA4S0.5TZR1S6027TP2-1 25 115/230 Auto 6.6 1.00 11.34 S, MX
Features:
• Automatic overload protected
Special Voltage
• Sealed bearings
Motors
210
your farm duty motor
worked as hard as you do?
Find out more about which LEESON motors are right for your applications,
online at:
www.regalbeloit.com
Creating a better tomorrow™...
Motors HVAC – Fan Motors
Pump
Washguard
Motors
Duty Motors
Agricultural
• Agricultural duty
Motors
Applications:
Motors
Ideally suited for a variety of fan applications requiring the motor to either be mounted in
or out of the air stream for proper ventilation. Some motors have an epoxy finish for harsh
applications and other motors have a baked on enamel finish. Industrial, commercial and
agricultural fan motors available.
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
212
HVAC - Fan Motors
Resilient Base Motors - Single Phase
Motors
Pump
Fan & Blower Service - Moderate Starting Torque
General Specifications:
• Industrial quality, resilient (cradle) • Moderate starting torque to
mounted reduce machinery stresses
Washguard
• Capacitor start-type • Suitable for belt-driven fans or
Motors
• Ball bearing designs fan-on-shaft applications
Duty Motors
SYN App. Over- F. L. “C”
Agricultural
Stock
HVAC / Fan
1/4 1800 48 E100111.00 √ 501 A4K17DR17 15 115/230 Auto. 1.2 1.00 11.14 S, MX, 53
Motors
1/4 1800 48 102963.00 √ 448 A4C17DR47 17 277 Auto. 2.2* 1.35 9.89 S, MX
1/3 3600 48 101431.00 √ 393 A4C34DR11 20 115/208-230 Auto. 2.3 1.00 9.39 S, MX
1/3 3600 48 E101431.00 √ 562 A4K34DR1 20 115/230 Auto. 1.5 1.00 11.14 S, MX, 53
1/3 1800 48 100110.00 √ 546 A4C17DR2 21 115/208-230 Auto. 3.3 1.35 9.89 S, MX
1/3 1800 48 E100110.00 √ 599 A4K17DR19 21 115/230 Auto. 1.9 1.35 11.14 S, MX, 53
1/3 1800 48 101015.00 √ 448 A4C17DR31 21 115/208-230 Auto. 3.3 1.00 9.89 S, MX
Special Voltage
1/3 1800 48 E101015.00 √ 490 A4K17DR20 21 115/230 Auto. 1.9 1.00 11.14 S, MX, 53
Motors
1/3 1800 S56 100014.00 √ 500 C4K17DJ5 19 115/230 None 3.3 1.35 10.31 S, MX, 53
1/3 1800 S56 E100014.00 √ 645 C4K17DJ9 21 115/230 None 1.9 1.35 10.97 S, MX, 53
1/3 1800 S56 100010.00 √ 546 A4C17DJ2 18 115/208-230 Auto. 3.3 1.35 10.31 S, MX
1/3 1800 S56 E100010.00 √ 605 A4K17DJ11 18 115/230 Auto. 1.9 1.35 11.81 S, MX, 53
1/3 1800 S56 100063.00 √ 448 A4C17DJ9 19 115/208-230 Auto. 3.3 1.00 10.31 S, MX
1/3 1800 S56 E100063.00 √ 575 A4K17DJ12 22 115/230 Auto. 1.9 1.00 11.81 S, MX, 53
Purpose Motors
1/3 1800 S56 102964.00 √ 546 A4C17DJ72 18 277 Auto. 2.8* 1.35 10.31 S, MX
1/2 3600 48 101432.00 √ 470 A4C34DR10 23 115/208-230 Auto. 3.4 1.00 9.89 S, MX
Definite
1/2 3600 48 E101432.00 √ 567 A4K34DR2 23 115/230 Auto. 2.2 1.00 11.39 S, MX, 53
1/2 1800 S56 100015.00 √ 555 C4C17DJ6 24 115/208-230 None 4.4 1.25 10.81 S, MX
1/2 1800 S56 E100015.00 √ 664 C4K17DJ10 25 115/230 None 2.3 1.25 11.47 S, MX, 53
1/2 1800 S56 100045.00 √ 533 M4C17DJ17 24 115/208-230 Man. 4.4 1.00 10.81 S, MX
1/2 1800 S56 E100045.00 √ 657 M4K17DJ13 24 115/230 Man. 2.3 1.00 12.31 S, MX, 53
1/2 1800 S56 101611.00 √ 588 A4C17DJ57 25 115/208-230 Auto. 4.4 1.25 10.81 S, MX, 32
Brake Motors
1/2 1800 S56 E101611.00 √ 667 A4K17DJ14 25 115/230 Auto. 2.3 1.25 12.31 S, MX, 32, 53
1/2 1800 S56 100011.00 √ 588 A4C17DJ3 25 115/208-230 Auto. 4.4 1.25 10.81 S, MX
1/2 1800 S56 E100011.00 √ 667 A4K17DJ13 25 115/230 Auto. 2.3 1.25 12.31 S, MX, 53
1/2 1800 S56 100064.00 √ 535 A4C17DJ10 24 115/208-230 Auto. 4.4 1.00 10.81 S, MX
1/2 1800 S56 E100064.00 √ 704 A4K17DJ79 24 115/230 Auto. 2.3 1.00 12.31 S, MX, 53
1/2 1800 S56 102965.00 √ 588 A4C17DJ74 22 277 Auto. 3.7* 1.25 10.81 S, MX
213
HVAC - Fan Motors
Resilient Base Motors - Single Phase
Motors
Pump
Stock
RPM NEMA Catalog List Wgt. load Amps Service Dim.
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
Motors
3/4 3600 48 101433.00 √ 508 A4C34DR9 25 115/208-230 Auto. 4.8 1.00 10.39 S, MX
3/4 3600 48 E101433.00 √ 630 A4K34DR3 25 115/230 Auto. 3.6 1.00 11.89 S, MX, 53
3/4 3600 S56H 100603.00 √ 541 A4C34DJ7 28 115/208-230 Auto. 4.9 1.25 11.31 S, MX
3/4 3600 S56H E100603.00 √ 643 A4K34DJ1 28 115/230 Auto. 3.6 1.25 12.31 S, MX, 53
3/4 1800 S56H 100016.00 √ 736 C6K17DJ7 29 115/230 None 5.4 1.25 11.81 S, MX, 53
3/4 1800 56H E119362.00 √ 766 C6K17DR44 33 115/230 None 3.3 1.25 13.21 S, MX, 53
Duty Motors
Agricultural
3/4 1800 S56H 100046.00 √ 728 M4C17DJ18 26 115/208-230 Man. 5.4 1.25 11.81 S, MX
3/4 1800 56 E119858.00 √ 851 M6K17DR1 33 115/208-230 Man. 3.3 1.25 12.54 S, MX, 53
3/4 1800 S56H 100047.00 √ 609 M4C17DJ19 27 115/208-230 Man. 5.5 1.00 11.81 S, MX
3/4 1800 56 E119859.00 √ 764 56B17DRS70006A3 27 115/208-230 Man. 3.3 1.25 12.54 S, MX, 53
3/4 1800 S56H 101839.00 √ 728 A4C17DJ67 28 115/208-230 Auto. 5.4 1.25 11.81 S, MX, 32
3/4 1800 56 E119864.00 √ 779 56B17DRS70003A3 25 115/208-230 Auto. 3.3 1.25 12.54 S, MX, 53
3/4 1800 S56H 100012.00 √ 728 A4C17DJ4 26 115/208-230 Auto. 5.4 1.25 11.81 S, MX
3/4 1800 56 E119856.00 √ 790 56B17DRS70004A3 29 115/208-230 Auto. 3.3 1.25 12.54 S, MX, 53
HVAC / Fan
Motors
3/4 1800 S56H 100065.00 √ 604 A4C17DJ11 25 115/208-230 Auto. 5.5 1.00 11.81 S, MX
3/4 1800 56 E119860.00 √ 749 56B17DRS70005A3 38 115/208-230 Auto. 3.3 1.25 12.54 S, MX, 53
3/4 1800 S56H 102966.00 √ 728 A4C17DJ73 26 277 Auto. 4.5* 1.25 11.81 S, MX
1 3600 56H 110478.00 √ 679 A6C34DR6 31 115/208-230 Auto. 6.0 1.25 11.85 S, US
1 3600 56H E110478.00 √ 683 A6K34DR6 31 115/230 Auto. 3.9 1.25 12.82 S, US, 53
1 1800 56H 113027.00 √ 737 C6K17DR37 32 115/230 None 6.4 1.15 11.81 S, US, 53
Special Voltage
1 1800 56H E113027.00 √ 825 C6K17DR43 36 115/230 None 4.2 1.15 12.82 S, US, 53
1 1800 56H 110007.00 √ 788 A6C17DR1 32 115/208-230 Auto. 6.4 1.15 11.83 S, US
Motors
1 1800 56 E110007.00 √ 868 A6K17DR50 35 115/230 Auto. 4.2 1.15 12.82 S, US, 53
1 1800 56H 110054.00 √ 771 A6C17DR2 35 115/208-230 Auto. 6.4 1.00 11.81 S, US
1 1800 56H E110054.00 √ 842 A6K17DR49 35 115/230 Auto. 4.2 1.00 12.82 S, US, 53
1 1800 56H 116599.00 √ 788 A6C17DR54 32 277 Auto. 5.4* 1.20 11.82 S, US
1 1/2 3600 56H 110479.00 √ 804 A6C34DR7 33 115/208-230 Auto. 8.2 1.15 11.82 S, US
Purpose Motors
1 1/2 3600 56H E110479.00 √ 920 A6K34DR7 33 115/230 Auto. 6.1 1.15 13.32 S, US, 53
1 1/2 1800 56H 110579.00 √ 953 A6K17DR6 41 115/208-230 Auto. 7.2 1.15 12.82 S, US, 6
Definite
1 1/2 1800 56H E110579.00 √ 1,005 U6K17DR48 41 115/230 Auto. 6.5 1.15 13.82 S, US, 53
1 1/2 1800 56H 116600.00 √ 1,035 A6K17DR41 41 277 Auto 6.0* 1.15 12.82 S, US
2 3600 56H 113633.00 √ 1,007 U6C34DR21 41 115/208-230 Auto. 10.0 1.15 13.82 S, US
2 3600 56H E113633.00 √ 1,067 U6K34DR8 41 115/230 Auto. 8.0 1.15 12.82 S, US, 53
2 1800 56H 113608.00 √ 1,016 A6K17DR28 45 115/208-230 Auto. 9.2 1.15 13.82 S, US, 6
2 1800 56H E113608.00 √ 1,097 56B17DRS70010A3 45 115/208-230 Auto. 8.0 1.15 14.63 S, US, 6, 53
Brake Motors
2 1800 56H 116601.00 √ 1,016 A6K17DR42 45 277 Auto. 8.7* 1.15 13.82 S, US
Green items are Premium Efficient Note listing on inside back flap
* F.L. Amps at 277V Specifications are subject to change without notice
C/A - Check Availability
IEC Motors
DC Motors
214
HVAC – Fan Motors
Single Phase - Resilient Base
Motors
Pump
Features:
• Industrial quality, resilient (cradle) mounted
• High starting torque
Washguard
• Automatic overload protected
Motors
• Suitable for belt-driven fans or fan-on-shaft applications
Stock
RPM NEMA Catalog List Wgt. load Amps @ Service Dim.
Duty Motors
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
Agricultural
1/2 1725 56 110025.00 √ 666 A6C17FR1 29 115/208-230 Auto. 4.4 1.15 11.96 S, US
3/4 1725 56 110026.00 √ 798 A6C17FR2 31 115/208-230 Auto. 5.4 1.15 12.46 S, US, 6
1 1725 56H 111915.00 √ 908 A6C17FR10 34 115/208-230 Auto. 6.4 1.15 12.96 S, US, 6
Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
Wattsaver® Premium Efficiency Fan Motors
Features:
• Premium efficient
• Class F insulation
Special Voltage
• Terminal boards
Motors
• Automatic overload protected
Purpose Motors
App. Over- F. L. “C”
% F.L.
Stock
Definite
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor Eff. (Inches) Notes
1/4 1800 48 101602.00 √ 497 A4K17DR7 22 115 Auto. 2.5 1.35 71.0 10.39 S, MX, 32
1/3 1800 48 101405.00 √ 587 A4K17DR5 22 115 Auto. 3.2 1.35 75.0 10.39 S, MX, 32
1/2 1800 48 101585.00 √ 671 A4K17DR6 25 115 Auto. 4.6 1.35 76.0 11.39 S, MX, 32
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
IEC Motors
DC Motors
215
HVAC - Fan Motors
Resilient Base Motors - Three Phase
Motors
Pump
General Specifications:
• Industrial quality, resilient (cradle) mounted
• Ball bearing design
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor EFF. (Inches) Notes
1/2 1725 56 111917.00 √ 626 C6T17NR1 28 208-230/460 None 1,8 1.15 78,5 11,31 S, US, 6, 12
1 1725 56 119419.00 √ 908 C6T17FR3 38 208-230/460 None 3,2 1.15 85,5 13,84 S, US, 6, 13
Note 12 - TENV Note listing on inside back flap
Specifications are subject to change without notice
RPM NEMA Catalog List Wgt. load Amps Service % F.L. Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor EFF. (Inches) Notes
1/3 3450 S56 101639.00 √ 455 A4T34DJ4 20 208-230/460 Auto. 1.7 1.35 61.0 10.31 S, US, 33
1/3 3450 S56 E101639.00 √ 489 C6T17FR3 20 230/460 Auto. 1.4 1.35 69.5 11.25 S, MX, 33
1/3 1725 S56 E100210.00 √ 544 C4T17DJ25 32 230/460 None 1.2 1.35 73.4 12.31 S, MX
1/3 1725 S56 101520.00 √ 604 A4T17DJ18 17 230/460 Auto. 1.6 1.35 64.3 10.81 S, MX, 33
1/3 1725 S56 E101520.00 √ 627 A4T17DJ26 17 230/460 Auto. 1.2 73.4 12.31 S, MX, 33
Special Voltage
1/2 3450 S56 101640.00 √ 546 A4T34DJ3 21 208-230/460 Auto. 2.4 1.25 69.0 10.31 S, US, 33
Motors
3/4 3450 S56 101641.00 √ 666 A4T34DJ5 23 230/460 Auto. 2.4 1.25 79.0 11.31 S, US, 33
3/4 3450 S56 E101641.00 √ 666 A4T34DJ5 23 230/460 Auto. 2.4 1.25 79.0 11.31 S, US, 33
Definite
3/4 1725 56 E119361.00 √ 682 C6T17DR41 29 230/460 None 2.4 1.25 81.5 11.82 S, MX
3/4 1725 S56 100908.00 √ 780 A4T17DJ13 29 230/460 Auto. 2.8 1.25 75.0 11.81 S, US, 33
3/4 1725 56 E119880.00 √ 780 56T17DRS70002A3 29 208-230/460 Auto. 2.6 1.25 81.1 12.04 S, US, 33
1 3450 56 E114192.00 √ 609 C6T34DR35 22 230/460 None 3.2 1.25 77.0 10.82 S, US
1 3450 56 113895.00 √ 703 A6T34DR44 28 230/460 Auto. 3.2 1.25 77.0 10.82 S, US, 33
1 3450 56 E113895.00 C/A 703 A6T34DR44 28 230/460 Auto. 3.2 1.25 77.0 10.82 S, US, 33
Brake Motors
1 1725 56 E110052.00 √ 858 C6T17DR37 38 230/460 None 3.2 1.15 83.5 13.32 S, US
1 1725 56H 111311.00 √ 746 A6T17DR11 30 208-230/460 Auto. 4.2 1.15 78.5 11.31 S, US, 33
1 1725 56H E111311.00 √ 875 A6T17DR63 36 230/460 Auto. 3.2 1.15 83.5 13.82 S, US, 33
1 1/2 3450 56H E114194.00 C/A 877 C6T34DR3 35 230/460 None 4.0 1.15 84.0 12.82 S, US
1 1/2 3450 56H 113896.00 √ 797 A6T34DR31 32 230/460 Auto. 4.2 1.15 81.5 11.82 S, US, 33
1 1/2 3450 56H E113896.00 √ 892 U6T34DR43 32 230/460 Auto. 4.0 1.15 84.0 12.32 S, US, 33
1 1/2 1725 56H E110433.00 √ 919 C6T17DR38 42 230/460 None 4.8 1.15 86.5 13.82 S, US
1 1/2 1725 56H 113846.00 √ 859 A6T17DR25 32 230/460 Auto. 5.6 1.15 78.5 11.81 S, US, 33
IEC Motors
1 1/2 1725 56H E113846.00 √ 939 A6T17DR47 42 230/460 Auto. 4.8 1.15 86.5 14.32 S, US, 33
2 3450 56H E114196.00 √ 970 C6T34DR38 46 230/460 None 4.8 1.15 85.5 13.82 S, US
2 3450 56H 113897.00 √ 926 A6T34DR32 42 208-230/460 Auto. 5.6 1.15 82.5 12.32 S, US, 33
2 3450 56H E113897.00 √ 986 A6T34DR42 42 230/460 Auto. 4.8 1.15 85.5 14.32 S, US, 33
2 1725 56H E114197.00 √ 1,011 C6T17DR39 57 230/460 None 5.8 1.15 86.5 14.32 S, US
2 1725 56H 113847.00 √ 926 A6T17DR26 36 230/460 Auto. 6.2 1.15 78.5 12.31 S, US, 33
2 1725 56H E113847.00 √ 1,116 A6T17DR48 46 230/460 Auto. 5.8 1.15 86.5 15.32 S, US, 33
DC Motors
3 3450 56HZ 113926.00 √ 913 U6T34DR33 43 230/460 Auto. 7.6 1.00 84.0 13.19 S, US, 33
3 1725 56HZ 116593.00 √ 993 A6T17DR33 50 230/460 Auto. 8.6 1.15 82.5 14.19 S, US, 33
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
216
HVAC – Fan Motors
Fan & Blower Motors
Motors
Pump
Multi-Speed - Single & Three Phase
Features:
• Variable torque
• PSC type for shaft mounted fan applications
Washguard
• Overload protected with a UL and CSA recognized automatic reset protector
Motors
• Listed speed or two speed operation using the proper auxiliary switch -
reference drawing 005210.01
• Variable speed by using a variable voltage control
• Overload protected with a UL and CSA recognized automatic reset protector
• Must be mounted in airstream for proper motor cooling
• Extended through-bolts
Duty Motors
Agricultural
• Epoxy powder coat painted motors
HVAC / Fan
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V
Motors
1/4 1625 48Z 100803.00 √ 441 A4P17NR1 22 115/230 Auto. 1.4 1.00 10.66 S, MX, 16, 34
1/4 1075 48Z 100824.00 √ 499 A4P11NR2 23 115/230 Auto. 1.4 1.00 10.66 S, MX, 16, 34
1/4 1075 S56Z 100805.00 √ 552 A4P11NJ1 25 115/230 Auto. 1.4 1.00 11.06 S, MX, 17, 34
1/3 1625 48Z 100804.00 √ 459 A4P17NR2 18 115/230 Auto. 1.6 1.00 10.66 S, MX, 16, 34
1/3 1625 S56H 100767.00 √ 530 A4P17NJ1 25 115/230 Auto. 1.6 1.00 10.31 S, MX, 34
1/3 1625 56HY 111348.00 √ 577 A6P17NZ6 32 115/230 Auto. 1.7 1.00 12.94 S, US, 59
Special Voltage
1/3 1075 48Z 100825.00 √ 541 A4P11NR3 28 115/230 Auto. 1.8 1.00 11.16 S, MX, 16, 34
Motors
1/3 1075 S56HZ 100806.00 √ 581 A4P11NJ2 30 115/230 Auto. 1.8 1.00 11.56 S, MX, 17, 34
1/2 1625 56HZ 111323.00 √ 660 A6P17NR3 33 115/230 Auto. 2.5 1.00 12.60 S, US, 17, 34
1/2 1625 S56H 100768.00 √ 544 A4P17NJ2 39 115/230 Auto. 2.2 1.00 10.81 S, MX, 34
1/2 1075 48Z 101645.00 √ 585 A4P11NR6 27 115/230 Auto. 2.8 1.00 11.16 S, MX, 16, 34
1/2 1075 56HZ 111321.00 √ 685 A6P11NR1 37 115/230 Auto. 3.0 1.00 13.60 S, US, 17, 34
1/2 825 56HZ 111919.00 √ 768 A6P8NR2 43 115/230 Auto. 3.2 1.00 13.60 S, US, 17, 34, 50
Purpose Motors
3/4 1625 56HZ 111324.00 √ 722 A6P17NR4 37 115/230 Auto. 3.5 1.00 13.10 S, US, 17
3/4 1625 56H 111266.00 √ 722 A6P17NR1 39 115/230 Auto. 3.5 1.00 12.31 S, US
Definite
3/4 1075 56HZ 111322.00 √ 776 A6P11NR2 47 115/230 Auto. 4.0 1.00 14.10 S, US, 17, 50
1 1625 56HZ 111267.00 √ 807 A6P17NR2 39 115/230 Auto. 4.4 1.00 12.81 S, US
Brake Motors
Single Phase - TEAO - PSC Type - Rigid Base
App. Over- F. L. “C”
Stock
1/3 1625 56Y 111202.00 C/A 550 A6P17NZ1 30 115/230 Auto. 1.7 1.00 12.05 S, US, 62
1/3 1750 48Y 101253.00 √ 477 A4P17NB28 22 115/208-230 Auto. 1.9 1.00 10.65 S, MX, 50
1/3 1140 S56Z 100604.00 √ 517 A4P11NH1 23 115/208-230 Auto. 1.8 1.00 11.40 S, MX
1/2 1625 48Y 100701.00 √ 511 A4P17NB9 25 115/230 Auto. 2.5 1.00 12.15 S, MX
1/2 1750 S56Y 101176.00 √ 524 A4K17NH2 24 115/230 Auto. 3.5 1.00 10.40 S, MX, 50, 54
Motor 101176 must be mounted within the airflow of the fan Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
DC Motors
217
HVAC - Fan Motors
Two-Speed - Two-Winding - Variable Torque
Motors
Pump
Features:
• Belted or fan-on-shaft applications
• Can be mounted within or outside the fan’s airstream
Washguard
• 3/4 HP and larger single phase are capacitor start motors; smaller single
phase are split phase start
• Ball bearings
3/4 | 1/3 1725 56H 111954.00 √ 1,090 C6C46DR2 41 115 11.0-6-7 1.00 17.23 S, US, 6
Motors
3/4 | 1/3 1725 56H 113672.00 √ 1,090 C6C46DR5 42 230 5.8-3.5 1.15 13.31 S, US, 6
1 | 7/16 1725 56H 111955.00 √ 1,281 C6K46DR1 44 115 13.2-9.5 1.00 12.82 S, US, 6, 53
1 | 7/16 1725 56H 113373.00 √ 1,281 C6K46DR3 42 230 6.5-4.6 1.00 12.82 S, US, 6, 53
Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
1/2 | 2/9 1725 56H 111957.00 C/A 1,133 C6T46DR2 35 460 0.9-0.5 1.00 12.32 S, US
3/4 | 1/3 1725 56H 111958.00 √ 1,195 C6T46DR3 39 208-230 2.8-1.6 1.00 12.82 S, US, 6
Definite
3/4 | 1/3 1725 56H 111959.00 C/A 1,195 C6T46DR4 39 460 1.4-0.8 1.00 12.82 S, US, 6
1 | 7/16 1725 56H 111960.00 √ 1,281 C6T46DR5 43 208-230 4.0-2.4 1.00 12.82 S, US, 6
1 | 7/16 1725 56H 111961.00 √ 1,281 C6T46DR6 43 460 2.0-1.2 1.00 12.82 S, US, 6
11/2 | 2/3 1725 56H 111962.00 √ 1,556 C6T46DR7 43 208-230 5.0-2.6 1.00 13.32 S, US, 6
11/2 | 2/3 1725 56H 111963.00 √ 1,556 C6T46DR8 42 460 2.5-1.3 1.00 12.82 S, US, 6
C/A - Check Availability Note listing on inside back flap
Brake Motors
218
HVAC – Fan Motors
Aeration Fan Motors
Motors
Pump
Totally Enclosed Air Over Motors (TEAO)
Features:
• Suitable for shaft mounted fans
• Capacitor start designs
Washguard
• Designed to run in the airflow of the driven fan
Motors
• Epoxy enamel finish to resist corrosion
• Ball bearing designs
Duty Motors
Agricultural
App. “C”
Stock
RPM NEMA Catalog List Wgt. F. L. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230 V Factor (Inches) Notes
3/4 3450 56 111332.00 √ 548 C6C34NB15 30 115/208-230 5.0 1.00 10.90 S, US, 22
1 3450 56 111333.00 √ 650 C6C34NB16 32 115/208-230 6.0 1.00 10.90 S, US, 22
1 1⁄2 3450 56 111949.00 √ 840 C6C34NB19 35 115/208-230 8.5 1.00 11.40 S, US, 23
1 1⁄2 3450 143TZ 120374.00 √ 904 C143C34NB1 34 115/208-230 8.5 1.00 11.84 S, US, 22
2 3450 145TZ 120375.00 √ 1,100 C145C34NB1 44 230 10.0 1.00 12.84 S, US, 23
HVAC / Fan
3 3450 145T 120376.00 √ 1,159 C145K34NB1 48 230 12.8 1.00 13.84 S, US, 53
Motors
Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
App. F. L. “C”
Motors
Stock
Purpose Motors
3 3450 145T 120379.00 √ 929 C145T34NB2 41 208-230/460 7.6 84.0 1.00 12.34 S, US, 23
Definite
Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
IEC Motors
DC Motors
219
HVAC – Fan Motors
Ventilation Fan Motor - Dust-Tight - Shaft Mounted
Motors
Pump
Features:
• Permanent split capacitor start motors
• Direct drive exhaust ventilation fans
Washguard
RPM NEMA Catalog Stock List Wgt. load Amps @ Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
1/3 1625 48Y 103783.00 √ 465 A4P17NZ132 22 115/230 Auto 1.7 1.00 10.93 S, MX
1/2 1625 48Y 103782.00 √ 502 A4P17NZ131 22 115/230 Auto 2.7 1.00 11.18 S, MX
1/2 825 56Z 114620.00 √ 873 A6P8NZ2 38 115/230 Auto 3.2 1.00 12.68 S, US, 50
1/2 850 48Y A099250.00 √ 566 A4P8NZ17 24 115/230 Auto 3.0 1.00 10.80 S, MX, 20, 50
Note listing on inside back flap
HVAC / Fan
1/2 850 S56C M099251.00 D 570 A4P8NC2 27 115/230 Auto 3.0 1.00 10.40 S, CN, 25
1/2 825 S56C A099251.00 √ 570 A4P8NC3 25 115/230 Auto 3.0 1.15 10.05 S, MX, 25
Definite
1 850 S56CZ A009644.00 √ 1,035 A6P8NC7 47 230 Auto 5.2 1.15 13.44 S, MX, 21, 50
D - Item to be discontinued once inventory is depleted Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
220
HVAC – Fan Motors
Condenser Fan Motors
Motors
Pump
Features:
• For shaft mounted fan applications
• Belly band and rigid mount designs
• Designed for vertical shaft up applications
• Enclosed shaft end endshield protects against contaminants
Washguard
• Automatic overload protection
Motors
• Double sealed ball bearings
• NOT FOR USE WITH INVERTERS
Duty Motors
Agricultural
App. F. L. “C”
Stock
HVAC / Fan
11⁄2 1140 56HY 115779.00 √ 995 A6T11DB21 46 208-230/460 5.6 79.0 1.15 15.56 S, US, 60
Motors
Note 58 - Belly Band Mount Note listing on inside back flap
Note 60 - Rigid Base Mount Specifications are subject to change without notice
C/A - Check Availability
Special Voltage
Single Phase - Commercial Duty
Motors
Designed for continuous duty use in ventilation fans, blowers and other
belt driven or fan-on-shaft applications.
Features:
Purpose Motors
• Split phase design motors
Definite
• Belt driven or fan-on-shaft applications
• Resilient base for quiet operation
• Automatic overload protection
• Built-in terminal panel for easy connection
Brake Motors
Single Phase - Drip-Proof - Resilient Base
App. Over- F.L. “C”
Stock
221
HVAC – Fan Motors
Residential / Industrial - Belted Fan Motors
Motors
Pump
Features:
Washguard
• Ball bearings
• Resilient “cradle” style base
• Automatic overload protection
Stock
NEMA Catalog List Wgt. load Amps Service Dim.
HP RPM 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 115 V Factor (Inches) Notes
1/4 1725 48YZ M900195.00 √ 292 48S17D1301 13 115 Auto. 5.0 1.35 9.72 S, MX, 7
1/3 / 1/9 1725 / 1140 56 M900277.00 √ 566 56S17D7208 20 115 Auto. 5.3/2.9 1.35 10.78 S, MX
1/3 1725 48YZ M900196.00 √ 345 48S17D1303 15 115 Auto. 6.1 1.35 9.72 S, MX, 7
1/2 / 1/6 1725 / 1140 56 M900599.00 C/A 767 56S17D5710 30 115 Auto. 8.4/4.5 1.25 11.85 S, US
1/2 1725 48YZ M900197.00 √ 451 48S17D1302 20 115 Auto. 7.2 1.25 10.72 S, MX, 7
HVAC / Fan
Motors
Note 7 - Includes sleeve to convert shaft to 5/8 inch Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Features:
• High efficiency designs
• Ball bearings
Purpose Motors
222
HVAC – Fan Motors
Pedestal Fan Motors - PSC Type
Motors
Pump
Designed for use where the fan is mounted directly to
the motor shaft. Yoke style mount is the industry standard type mount.
Features:
Washguard
• Drop-in replacement for most standard belted-fan motors
Motors
• Extremely quiet running compared to standard fan motors
• Consumes approximately half of the power of a standard fan motor
• Permanent split capacitor type
• Ball bearing design
• Heavy-gauge steel yoke is welded to the motor frame
• 10-32 mounting studs are extended 1.0” on 5.14” bolt circle
Duty Motors
Agricultural
• Motors are UL and CSA recognized for both the U.S. and Canadian markets
• Automatic overload protection
HVAC / Fan
Stock
Motors
HP Hz* Frame Number Price Model Number (lbs) Voltage Prot. 115 V Factor Dia. (Inches) Notes
1/4 1625 48Y 103711.00 √ 322 A4P17NZ117A 22 115/230 Auto. 3.6 1.00 0.50 10.81 S, MX
1/4 1625 48Y 191908.00 D 322 A4P17NZ64A 14 115/230 Auto. 2.6 1.00 0.63 10.95 S, CN
1/4 1625 48Y 103712.00 √ 322 A4P17NZ118A 23 115/230 Auto. 3.6 1.00 0.63 10.81 S, MX
1/4 1075 48Y 103713.00 √ 357 A4P11NZ74A 18 115 Auto. 3.2 1.00 0.50 10.06 S, MX
1/4 1075 48Y 103714.00 √ 357 A4P11NZ75A 20 115 Auto. 3.2 1.00 0.63 10.06 S, MX
Special Voltage
1/3 1625 48Y 103715.00 √ 354 A4P17NZ65A 24 115/230 Auto. 3.5 1.00 0.50 10.81 S, MX
Motors
1/3 1625 48Y 103716.00 √ 354 A4P17NZ122A 24 115/230 Auto. 3.5 1.00 0.63 10.81 S, MX
1/3 1075 48Y 103717.00 √ 399 A4P11NZ76A 25 115 Auto. 4.2 1.00 0.50 10.06 S, MX
1/3 1075 48Y 103718.00 √ 399 A4P11NZ77A 25 115 Auto. 4.2 1.00 0.63 10.06 S, MX
1/2 1625 48Y 103719.00 √ 406 A4P17NZ125A 25 115/230 Auto. 5.4 1.00 0.50 11.06 S, MX
1/2 1625 48Y 103720.00 √ 406 A4P17NZ126A 25 115/230 Auto. 5.4 1.00 0.63 11.06 S, MX
1/2 1075 48Y 103721.00 √ 462 A4P11NZ78A 25 115 Auto. 5.7 1.00 0.50 11.06 S, MX
Purpose Motors
1/2 1075 48Y 103722.00 √ 462 A4P11NZ79A 25 115 Auto. 5.7 1.00 0.63 11.06 S, MX
Definite
* Two-speed operation possible by connecting 115V power to 230V connections. Note listing on inside back flap
Actual speed (approx. 67% of rated speed) will depend on fan blade design. Specifications are subject to change without notice
D - Item to be discontinued once inventory is depleted
Brake Motors
IEC Motors
DC Motors
223
HVAC - Fan Motors
Two-Speed Motors
Motors
Pump
Features:
• Two-speed, single winding designs
• Totally enclosed fan cooled designs
• Ball bearing designs
• Single voltage designs
HVAC / Fan
Motors
2 | 1/2 1800 | 900 145T 120940.00 C/A 1,411 C145T48FB48 39 460 3.2–1.3 1.00 12.43 S, US
Motors
3 | 3/4 1800 | 900 184T 131474.00 C/A 1,512 C184T48FB67 80 460 4.0–1.8 1.00 14.46 S, MX
5 | 1 1/5 1800 | 900 184T 131475.00 √ 1,928 C184T48FB68 98 460 6.5–2.5 1.00 15.96 S, MX
7 1/2 | 1 7/8 1800 | 900 215T 140447.00 √ 2,718 C215T48FB46 158 460 9.7–3.3 1.00 17.71 S, MX
10 | 2 1/2 1800 | 900 215T 140448.00 √ 3,203 C215T48FB48 171 460 12.7–4.2 1.00 18.71 S, MX
C/A - Check Availability Note listing on inside back flap
Purpose Motors
1 | 1/4 1800 | 900 143T 120944.00 C/A 1,163 C143T48FB6 39 208-230 3.0–1.4 1.00 12.43 S, US
1/2 | 3/8 1800 | 900 145T 120947.00 C/A 1,215 C145T48FB61 39 208-230 4.8–2.0 1.00 12.43 S, US
2 | 1/2 1800 | 900 145T 120946.00 √ 1,411 C145T48FB59 38 208-230 6.4–2.6 1.00 12.43 S, US
3 | 3/4 1800 | 900 184T 131468.00 √ 1,512 C184T48FB61 81 208-230 8.0–3.6 1.00 14.46 S, MX
5 | 1 1/5 1800 | 900 184T 131469.00 √ 1,928 C184T48FB62 97 208-230 13.0–5.0 1.00 15.96 S, MX
7 1/2 | 1 7/8 1800 | 900 215T 140443.00 C/A 2,745 C215T48FB45 157 208-230 19.4–6.6 1.00 17.71 S, MX
10 | 2 1/2 1800 | 900 215T 140444.00 C/A 3,203 C215T48FB47 169 208-230 25.4–8.4 1.00 18.71 S, MX
C/A - Check Availability Note listing on inside back flap
IEC Motors
224
HVAC – Fan Motors
Fan & Blower Motors -
Motors
Pump
Multi-Speed - Three Phase
Constant Torque - 460 Volt - Three Phase - One Winding - TEFC - Rigid Base
App. F.L. “C”
Stock
NEMA Catalog List Wgt. Amps Service Dim.
Washguard
HP RPM 60 Hz Frame Number Price Model Number (lbs) Voltage @ 460V Factor (Inches) Notes
Motors
1 | 1/2 1800 | 900 143T 120943.00 C/A 1,801 C143T48FB9 39 460 1.4–1.6 1.00 12.93 S, US
2|1 1800 | 900 184T 131471.00 √ 2,121 C184T48FB64 71 460 2.9–2.9 1.00 13.96 S, MX
3 | 1 1/2 1800 | 900 184T 131470.00 √ 2,407 C184T48FB63 83 460 3.8–3.5 1.00 14.96 S, MX
5 | 2 1/2 1800 | 900 215T 140445.00 C/A 3,144 C215T48FB43 148 460 6.7–7.0 1.00 17.71 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Duty Motors
Agricultural
Constant Torque - 208-230 Volt - Three Phase - One Winding - TEFC - Rigid Base
App. “C”
Stock
HVAC / Fan
1 | 1/2 1800 | 900 143T 120942.00 C/A 1,801 C143T48FB8 40 208-230 3.2–4.2 1.00 12.93 S, US
Motors
2|1 1800 | 900 184T 131473.00 C/A 2,121 C184T48FB66 72 208-230 5.8–5.7 1.00 13.96 S, MX
3 | 1 1/2 1800 | 900 184T 131472.00 √ 2,407 C184T48FB65 83 208-230 7.6–6.9 1.00 14.96 S, MX
5 | 2 1/2 1800 | 900 215T 140446.00 C/A 3,144 C215T48FB44 140 208-230 13.4–14.0 1.00 17.71 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
TORQUE HORSEPOWER
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
225
HVAC – Fan Motors
PSC - Variable Speed - Single Phase
Motors
Pump
Features:
• Agricultural fan duty
• Extended thru-bolts
• Totally enclosed air over (TEAO) designs
Washguard
Motors
Stock
RPM NEMA Catalog List Wgt. load Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1/4 1625 48Z LM24445 √ 767 SPA4S0.25TZRY1A6027AP11-1 20 115/230 Auto. 1.4 1.00 11.06 S, MX, 16
Duty Motors
1/4 1625 48Z LM24447 C/A 546 SPA4S0.25TZRY1A6027AP10-1 17 115/230 Auto. 1.5 1.00 10.04 S, MX, 16
Agricultural
1/3 1625 48Z LM24450 √ 842 SPA4S0.33TZRY1A6027AP11-1 23 115/230 Auto. 1.8 1.00 11.81 S, MX, 16
1/3 1625 48Z LM24448 √ 603 SPA4S0.33TZRY1A6027AP10-1 17 115/230 Auto. 2.2 1.00 10.04 S, MX, 16
1/3 1075 48Z LM24443 √ 813 SPA6S0.33TZRY1A6027AP10-1 22 115/230 Auto. 2.1 1.00 10.84 S, MX, 16
1/2 1625 48Z LM24446 √ 860 SPA4S0.5TZRY1A6027AP11-1 23 115/230 Auto. 2.7 1.00 11.81 S, MX, 16
1/2 1625 48Z LM24449 √ 722 SPA4S0.5TZRY1A6027AP10-1 21 115/230 Auto. 3.0 1.00 10.84 S, MX, 16
1/2 1075 48Z LM24444 √ 860 SPA6S0.5TZRY1A6027AP10-1 20 115/230 Auto. 3.2 1.00 10.84 S, MX, 16
C/A - Check Availability Note listing on inside back flap
HVAC / Fan
1/3 1625 56Y 111202.00 C/A 550 A6P17NZ1 24 115/230 Auto. 1.7 1.00 12.05 S, US, 58
1/3 1140 S56Y 100604.00 √ 517 A4P11NH1 23 115/208-230 Auto. 1.8 1.00 11.40 S, MX
1/3 1075 48Y A099261.00 √ 556 A4P11NB53 21 115/230 Auto. 1.8 1.00 10.90 S, MX
1/2 1750 S56Y 101176.00 √ 524 A4K17NH2 26 115/230 Auto. 3.5 1.00 10.40 S, MX, 50, 54
1/2 1750 48Y 100701.00 √ 511 A4P17NB9 29 115/230 Auto. 2.5 1.00 12.15 S, MX
1/2 1075 48Y A099946.00 √ 536 A4P11NB54 26 115/230 Auto. 2.5 1.00 11.90 S, MX
3/4 1075 56HZ A099847.00 √ 765 A6P11NB5 35 115/230 Auto. 3.7 1.00 12.19 S, MX
Note listing on inside back flap
IEC Motors
226
HVAC - Fan Motors
Grain Dryer / Centrifugal Fan Motors
Motors
Pump
Used in ag fan and blower applications. Screens used
to protect against entry of pests and and silage.
Features:
Washguard
• NEMA® Premium and EPAct efficiency
Motors
• Rodent screens
• Re-greasable bearings
• Cast Iron construction
• 1.25 service factor
• Class F insulation
• Inverter duty insulation system
Duty Motors
Agricultural
• UL recognized and CSA certified
• TZ shafts are 1 inch longer than NEMA
HVAC / Fan
RPM NEMA Catalog List Wgt. Amps % F.L. Dim.
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 230V EFF. (Inches) Notes
10 1800 215TZ 171861.60 √ 1,942 C215T17DB69 220 230/460 25.6 91.7 17.90 C, CN
15 1800 254T 170540.60 D 2,614 C254T17DB45 279 230/460 37.0 93.0 20.94 C, CN
15 1800 254TZ 171862.60 √ 2,614 C254T17DB48 279 230/460 37.0 93.0 21.88 C, CN
20 1800 256T 170541.60 D 3,187 C256T17DB10 324 230/460 51.0 93.0 22.60 C, CN
20 1800 256TZ 171863.60 √ 3,187 C256T17DB15 324 230/460 51.0 93.0 23.62 C, CN
Special Voltage
25 1800 284TZ 171864.60 √ 4,199 C284T17DB15 404 230/460 59.5 93.6 24.92 C, CN
30 1800 286T 170542.60 D 4,291 C286T17DB13 471 230/460 71.0 94.1 25.00 C, CN
Motors
30 1800 286TZ 171865.60 √ 4,291 C286T17DB16 471 230/460 71.0 94.1 26.57 C, CN
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
D - Item to be discontinued once inventory is depleted
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
Features:
• Open air over, fan-on-shaft design
• Continuous duty
• Thermostats provide overload protection
• Extra nameplate provided for remote mount
Washguard
RPM NEMA Catalog List Wgt. load F.L. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
3 - 4 1/2 3600 145TZ LM24778 √ 1,467 SSD2S3-4.5TZ1B66QS10-1 46 230 Auto 12.5-19.1 1.50 13.74 S, MX
5-7 3600 182TZ 131847.00 √ 1,723 C182C34DB2 91 230 T-Stat 26.8-35.3 1.00 16.44 S, MX
7 1/2-10 3600 182TZ 131848.00 √ 1,915 C182K34DB4 98 230 T-Stat 31-42 1.00 16.44 S, MX
7 - 10 3600 184TZ LM24780 √ 2,399 SSD2S7-10TZ1B66QS11-1 102 230 T-Stat 31-47 1.40 15.94 S, MX
7- 9 3600 184TZ LM24781 C/A 1,943 SSD2S7-9TZ1C66QSS11-1 88 230 T-Stat 36-45 1.30 15.50 S, MX
HVAC / Fan
Motors
10 - 15 3600 215TZ 140640.00 √ 2,943 C215K34DB2 159 230 T-Stat 39.5-61.5 1.00 20.42 S, MX
10 - 15 3600 215TZ LM24782 √ 3,047 SS215D2S10-15TZ1C66QS11-1 135 230 T-Stat 46-71 1.50 18.16 S, MX
10 - 15 3600 215TZ 141084.00 √ 2,943 C215K34DB3 159 230 T-Stat 40-59 1.00 20.08 S, MX, 52
Note 52 - Extra High Starting Torque Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
RPM NEMA Catalog List Wgt. load F.L. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
Purpose Motors
5-7 1/2 3600 184TZ 131849.00 √ 1,395 C184T34DB8 73 208-230/460 T-Stat 12.5-19.0 1.00 13.94 S, MX
7 1/2-10 3600 184TZ 131850.00 √ 1,629 C184T34DB9 88 208-230/460 T-Stat 17.5-23.4 1.00 15.44 S, MX
Definite
10 - 15 3600 215TZ 140641.00 √ 1,963 C215T34DB3 114 208-220/440 T-Stat 26-40 1.50 17.41 S, MX
Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
IEC Motors
DC Motors
228
HVAC - Fan Motors
Hatchery and Incubator Fan Motors
Motors
Pump
Features:
• Automatic overload protected
• 15MFD, 370V capacitor shipped loose with motor
• 101341.00 is a permanent split capacitor motor
• Motor 114102.00 is a split phase two-speed motor
Washguard
• Double shielded ball bearings
Motors
Single Phase - TEAO
Duty Motors
Agricultural
App. Over- “C”
Stock
NEMA Catalog List Wgt. load F.L. Amps Service Dim.
HP RPM 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1/4 1800 48Y 101341.00 √ 540 A4P17NZ24 17 115/230 Auto. 1.40 1.00 8.93 S, MX, 16, 34
1/3 1800 48Z 103878.00 √ 584 L4P17NZ149 20 115/230 Auto. 1.65 1.00 9.93 S, MX, 16, 34
1/2-1/5 1800/1200 56H 114102.00 √ 704 A6S46NR4 36 115 Auto. 9.3-5.6* 1.25 12.32 S, US
Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
Special Voltage
Variable Speed - High Performance AG Fan Motors
Motors
Features:
• Water-tight connection end compartment
• Locked double sealed ball bearings
• All angle mounting
Purpose Motors
• Shaft seal on output shaft end
Definite
• Automatic overload protection
RPM NEMA Catalog List Wgt. load F.L. Amps Service Dim.
Brake Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
1/4 1625 48Y A099899.00 √ 415 A4P17NZ139 19 115/230 Auto. 1.4 1.00 10.64 S, MX
1/4 1060 48Y A099460.00 √ 488 A4P11NB5 23 115/230 Auto. 1.5 1.00 11.14 S, MX
1/3 1625 48Y A099900.00 √ 443 A4P17NZ141 20 115/230 Auto. 1.7 1.00 10.89 S, MX
1/3 1060 48Y A099461.00 √ 480 A4P17NZ86 23 115/230 Auto. 1.8 1.00 11.14 S, MX
1/2 1625 48Y A099901.00 √ 492 A4P17NZ142 23 115/230 Auto. 2.6 1.00 10.89 S, MX
1/2 1060 48Y A099462.00 √ 524 A4P11NZ85 26 115/230 Auto. 2.8 1.00 10.89 S, MX
Note listing on inside back flap
IEC Motors
229
HVAC – Fan Motors
Agricultural Fan Motors - Belt Drive - TEAO
Motors
Pump
Features:
• Capacitor start/capacitor run designs for high efficiency
• Mount in airstream for proper cooling
Washguard
Motors
Stock
RPM NEMA Catalog List Wgt. load F.L. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230V Factor (Inches) Notes
Duty Motors
Agricultural
Agriculture Fan
Special Voltage
230
HVAC - Fan Motors
Lincoln Motors™ Agriculture Fan Motors™
Motors
Pump
Direct Drive Thru-Bolt Mount
Features:
• Extended thru-bolts
Washguard
• 48Y - 1/2” dia., 1-1/2 long shaft with flat
Motors
• 48YZ - 1/2” dia., 2-1/2” long shaft with two flats
Duty Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 115V Factor (Inches) Notes
Agricultural
1/4 1725 48Y LM24488 √ 515 SPN4S0.25TZNY1S6001TP1-1 10 115 Auto 4.0 1.00 7.62 S, MX
Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Two Speed - Single Phase - TEAO - Thru-Bolt Mount
Motors
App. Over- “C”
Stock
RPM NEMA Catalog List Wgt. load F.L. Amps Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 115V Factor (Inches) Notes
"SPA4/6/1S0.25/0.25TZNY1S
1/4 1725 48YZ LM24492 √ 537 17 115 Auto 3.7 1.00 11.09 S, MX
6001TP2-1"
"SPA4/6/1S0.33/0.33TZNY1S
1/3 1725 48YZ LM24491 √ 605 18 115 Auto 5.3 1.00 11.34 S, MX
Special Voltage
6001TP2-1"
Motors
Note listing on inside back flap
Specifications are subject to change without notice
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
231
HVAC – Fan Motors
Lincoln Motors™ Agriculture Fan Motors
Motors
Pump
Features:
• Single phase - 115 & 230 Volts
• Extended thru-bolts on 48Z frame motors
• 48Z - 1/2 dia. shaft, 2-1/2 long with two flats
• 56Z - 1/2 dia. shaft, 2-1/2” long shaft with keyway
Washguard
1/4 1725 48Z LM24487 C/A 537 SPA4S0.25TZRY1S6001TP2-1 17 115 Auto 3.5 1.00 17.32 S, MX
1/3 1725 48Z LM24486 √ 657 SPA4S0.33TZRY1S6001TP2-1 21 115 Auto 4.2 1.00 17.32 S, MX
1/2 1725 56Z LM24809 C/A 816 SRA4S0.5TZR1S6027TP2-1 25 115/230 Auto 6.6 1.00 11.34 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
Features:
Special Voltage
• Sealed bearings
• 18” extended leads
• Shaft has keyway and 1/4-20 UNC tapped hole on end of shaft
Purpose Motors
232
HVAC - Fan Motors
TEAO Cooling Tower Single Speed Motors
Motors
Pump
Applications:
Cooling towers, fan and blowers, and other severe duty
Washguard
environments where long life and high efficiency are desired.
Motors
Features:
• Complete cast iron construction for rigidity and • Inpro® shaft seal protected
reduced vibration • Shaft grounding ring (SGRs) installed
• Inverter rated IRIS® insulation system
Duty Motors
• Epoxy painted
Agricultural
• Severe duty treatment of internal parts • 10:1 constant and variable torque rated
• Class F insulation • Extra nameplate with CE for external mounting
• F-1/F-2 capable • Designed for shaft up mounting
• Re-greaseable bearings • 1.15 S.F. under sine wave power
• Brass T-drain installed - both ends at 6:00
HVAC / Fan
Three Phase - TEAO - Rigid Base
Motors
App. F.L. “C”
Stock
Special Voltage
5 1800 184T 824529.00 √ 1,998 184TTTN16542 155 230/460 12.4 90.2 15.82 C, US
5 1200 215T 824555.00 √ 2,474 215TTTN16580 220 230/460 13.8 89.5 17.47 C, US
Motors
7,5 1800 213T 824530.00 √ 2,570 213TTTN16536 225 230/460 19.2 91.7 17.47 C, US
7,5 1200 254T 824556.00 √ 3,915 254TTTNA16580 332 230/460 19.8 91.0 24.32 C, US
10 1800 215T 824531.00 √ 2,692 215TTTN16537 300 230/460 25.0 91.7 20.47 C, US
10 1200 256T 824557.00 √ 4,161 256TTTNA16577 360 230/460 26.2 91.0 24.31 C, US
15 1800 254T 824532.00 √ 3,499 254TTTNA14533 340 230/460 39.0 91.0 24.32 C, US
Purpose Motors
15 1200 284T 824558.00 √ 4,502 284TTTNA16578 439 230/460 41.0 91.7 26.97 C, US
20 1800 256T 824533.00 √ 3,698 256TTTNA14533 400 230/460 50.0 91.0 24.31 C, US
Definite
20 1200 286T 824559.00 √ 4,977 286TTTNA16576 470 230/460 53.5 91.7 26.97 C, US
25 1800 284T 824534.00 √ 4,397 284TTTNA14536 402 230/460 63.0 92.4 26.97 C, US
25 1200 324T 824560.00 √ 6,931 324TTTS16579 582 230/460 65.0 93.0 26.14 C, US
30 1800 286T 824535.00 √ 5,128 286TTTPA14531 400 230/460 74.0 92.4 26.19 C, US
30 1200 326T 824561.00 √ 6,951 326TTTS16578 629 230/460 77.0 93.0 27.64 C, US
40 1800 324T 824536.00 √ 6,647 324TTTPA14532 550 230/460 100.0 93.0 28.10 C, US
Brake Motors
40 1200 364T 824562.00 √ 11,781 364TTTS16576 854 230/460 100.0 94.1 29.01 C, US
50 1800 326T 824537.00 √ 8,370 326TTTPA14532 600 230/460 122.0 93.0 29.60 C, US
50 1200 365T 824563.00 √ 12,136 365TTTS16578 920 230/460 123.0 94.5 30.01 C, US
60 1800 364T 824538.00 √ 11,715 364TTTS14531 850 230/460 144.0 93.6 29.01 C, US
60 1200 404T 824564.00 √ 15,727 404TTTS16576 1064 230/460 144.0 94.5 34.38 C, US
75 1800 365T 824539.00 √ 14,583 365TTTS14533 1000 230/460 172.0 94.1 30.01 C, US
75 1200 405T 824565.00 √ 16,542 405TTTS16578 1180 230/460 179.0 95.0 34.38 C, US
100 1800 405T 824540.00 √ 18,059 405TTTS14531 1250 230/460 228.0 94.5 34.25 C, US
IEC Motors
100 1200 444T 824566.00 √ 24,147 444TTTN16578 1780 230/460 240.0 95.4 40.13 C, US
125 1800 444T 824541.00 √ 23,249 444TTTN14531 1990 460 143* 94.5 40.03 C, US
125 1200 445T 824567.00 √ 26,844 445TTTN16579 1964 460 148* 95.4 40.05 C, US
150 1800 445T 824542.00 √ 27,683 445TTTN14532 1879 460 172* 95.0 40.13 C, US
150 1200 445T 824568.00 √ 30,359 445TTTN16578 2102 460 181* 95.8 40.13 C, US
200 1800 445T 824543.00 C/A 33,044 445TTTN14533 2556 460 225* 95.0 40.13 C, US
200 1200 449T 824569.00 C/A 38,585 449TTTS16577 2409 460 240* 95.8 48.62 C, US
DC Motors
250 1800 449T 824544.00 C/A 31,932 449TTTS14531 2409 460 290* 95.0 48.62 C, US
250 1200 449T 824570.00 C/A 42,743 449TTTS16576 2409 460 300* 95.8 48.62 C, US
C/A - Check Availability Note listing on inside back flap
* - Amps at 460 Volts Specifications are subject to change without notice
Note: Shaded model numbers are cast iron frame
Applications:
Fans found in kilns and other high ambient temperature environments
where long life and high efficiency are desired. These TEAO motors must be
mounted within the airstream for proper cooling. Suitable for use on variable
Washguard
Motors
frequency drives.
Features:
• Cast iron construction for rigidity and reduced vibration
• Internal and external epoxy paint
• IRIS® Inverter duty insulation system
Duty Motors
Agricultural
• 8 foot leads
Motors
5 1200 215T 824577.00 √ 3,985 215TTTS17077 195 460 6.9 89.5 17.51 C, US
7 1/2 1200 254T 824578.00 √ 4,887 254TTTNA17078 311 460 9.8 90.2 20.61 C, US
Definite
10 1200 256T 824579.00 √ 5,604 256TTTNA16579 355 460 12.8 91.0 22.35 C, US
10 900 284T 824580.00 √ 5,810 284TTTNA17103 433 460 15.2 88.5 23.42 C, US
15 1800 254T 824581.00 √ 4,613 254TTTNA16546 325 460 18.2 92.4 20.61 C, US
15 1200 284T 824582.00 √ 6,712 284TTTNA16580 433 460 20.5 91.7 23.42 C, US
20 1200 286T 824583.00 √ 7,351 286TTTNA16577 478 460 27.0 91.7 24.92 C, US
20 900 324T 824584.00 C/A 8,982 324TTTS16604 620 460 29.5 90.2 27.77 C, US
Brake Motors
25 1200 324T 824585.00 C/A 9,234 324TTTS16580 675 460 32.5 93.0 27.77 C, US
30 1200 326T 824586.00 C/A 9,778 326TTTS16580 725 460 38.5 93.0 27.77 C, US
234
Custom Multi-Speed Low-Speed and Modified Motor Program
Motors
Pump
Washguard
Motors
Duty Motors
Agricultural
PDQ Modular Production Program
Custom Multi-Speed, Low Speed and Modified Motors,
one or several at a time, on a quick turnaround basis.
The LEESON’s® brand “Modular Production” utilizes specially designed and standard
components to make almost any imaginable NEMA® frame multi-speed or low-speed motor
HVAC / Fan
available when you need it.
Motors
Quick Turnaround Custom PDQ can provide quick answers to inquiries and fast turnaround for
orders of highly customized motors.
Comprehensive Catalog - Features the Industry’s most extensive two-speed and low speed
motor selection as well as a listing of commonly requested modifications.
Full Fact Acknowledgement - With Custom PDQ all custom motors are promptly and fully
acknowledged upon receipt of order. The acknowledgement includes the complete motor
specification pricing and shipping date.
Special Voltage
Motors of 254T frame and larger are of cast iron construction with all the rugged features of LEESON’s stock single-speed motors described on
Motors
pages 38 & 39 of this catalog. All two-speed designs are class F insulated and have a 1.15 S.F.
Purpose Motors
needs, Custom PDQ gives you the ability to say
“Yes” to requests for customized motors.
Definite
Multi-speed
Two, three and four-speed motors
Low Speed
900, 720, 600, 450 and 300 rpm
Modified as per Catalog 1057 - Some examples are:
• Anti-condensation heaters
Brake Motors
• Brakemotors, custom
• Cooling tower specifications
• Downsized frames
• Epoxy and fungus proofing
• 50 Hz
• Premium-efficiency, North American manufacture
• Insulation, special
• Marine duty (below deck)
IEC Motors
• Inverter rated
• Class B insulation systems – 42, 48 and 56 frames
• Class F insulation system – 140 frame and higher
• Shielded ball bearings for direct coupled applications.
(Contact your local sales office for belted load applications)
• Rolled steel, aluminum, and cast iron frame material designs
HVAC / Fan
• Continuous duty
Motors
Applications:
For use where special voltages are required. Ideally suited for use on pumps, compressors,
fans, blowers, conveyors, machine tools and other industrial applications
.
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
Motors
Pump
Washguard
Motors
Three Phase - TEFC - Rigid Base
App. F.L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 575V Eff. Factor (Inches) Notes
1/2 3600 56 110714.00 √ 496 C6T34NB6 25 575 0.6 82.5 1.15 10.40 S, US, 12
1/2 1800 56 110199.00 √ 540 C6T17NB4 25 575 0.8 78.5 1.15 9.90 S, US, 12
Duty Motors
Agricultural
1/2 1800 56 LM24154 √ 564 SRF4S.5T65 22 575 0.9 70.0 1.25 10.72 S, MX
1/2 1800 S56 101051.00 √ 540 C4T17FH3 24 575 0.8 68.0 1.15 9.94 S, MX
1/2 1200 56 LM24295 C/A 886 SRF6S0.5T65 24 575 1.1 68.0 1.15 11.82 S, MX
3/4 3600 56 110354.00 √ 592 C6T34FB8 25 575 1.0 75.5 1.15 10.48 S, US
3/4 1800 56 110178.00 √ 574 C6T17FB3 25 575 1.1 77.0 1.15 10.48 S, US
3/4 1200 56 111394.00 √ 818 C6T11FB8 33 575 1.2 75.5 1.15 11.48 S, US
1 3600 56 110715.00 √ 639 C6T34FB15 27 575 1.3 77.0 1.15 10.48 S, US
HVAC / Fan
1 1800 56 119539.00 √ 889 C6T17FB184 38 575 1.3 85.5 1.15 12.23 S, MX
Motors
1 1800 143T 121937.00 √ 918 C143T17FB29 39 575 1.3 85.5 1.15 12.93 S, US
1 1200 145T 121938.00 √ 1,087 C145T11FB31 47 575 1.5 82.5 1.25 13.43 S, US
1 1⁄2 3600 145T 121939.00 √ 1,020 C145T34FB41 37 575 1.6 84.0 1.25 12.93 S, US
1 1⁄2 1800 56 119540.00 √ 935 C6T17FB185 42 575 1.9 86.5 1.15 12.98 S, US
1 1⁄2 1800 145T 121940.00 √ 953 C145T17FB90 42 575 1.9 86.5 1.15 13.43 S, US
1 1⁄2 1200 182T 132251.00 √ 1,584 C182T11FB13 78 575 2.4 87.5 1.15 14.46 S, MX
Special Voltage
2 3600 145T 121941.00 √ 1,116 C145T34FB42 45 575 1.9 85.5 1.25 13.43 S, US
Motors
2 1800 145T 121942.00 √ 992 C145T17FB91 48 575 2.3 86.5 1.25 14.43 S, US
2 1200 184T 132252.00 √ 1,614 C184T11FB26 92 575 2.6 88.5 1.15 14.96 S, MX
3 3600 182T 171624.60 √ 1,467 C182T34FB7 93 575 3.0 87.5 1.15 16.14 C, CN, T
3 3600 182T LM33601 C/A 1,174 AF2B3T65AP26 83 575 3.1 86.5 1.25 14.96 A, MX
3 1800 182T 132253.00 √ 1,124 C182T17FB52 80 575 3.2 89.5 1.15 13.96 S, MX
3 1800 182T LM33603 C/A 1,185 AF4B3T65AP26 83 575 3.1 89.5 1.25 14.19 A, MX
Purpose Motors
5 3600 184T 132254.00 √ 1,274 C184T34FB24 88 575 4.8 88.5 1.15 14.96 S, MX
Definite
5 1800 184T 132255.00 √ 1,235 C184T17FB64 94 575 5.0 89.5 1.15 14.96 S, MX
5 1800 184T LM34215 √ 1,372 AF4B5T65AP26 95 575 5.1 89.5 1.00 14.96 A, MX
5 1200 215T LM34214 √ 2,248 AF6B5T65 159 575 5.5 89.5 1.00 18.84 A, US
5 900 254T LM34117 C/A 3,311 AF8B5T65 165 575 6.0 86.5 1.15 23.51 A, US
7 1⁄2 3600 213T 170196.60 √ 1,872 C213T34FB43 156 575 7.4 89.5 1.15 18.19 C, CN, T
7 1⁄2 1800 213T 141291.00 √ 1,586 C213T17FB24 144 575 7.7 91.7 1.15 18.73 S, MX
7 1⁄2 1800 213T LM16391 D 1,757 AF4P7.5T65 160 575 8.0 89.5 1.25 19.70 A, US
Brake Motors
7 1/2 1800 213T LM34216 √ 2,160 AF4B7.5T65 162 575 7.7 91.7 1.00 18.84 A, US
10 3600 215T 170197.60 √ 2,217 C215T34FB48 184 575 9.2 91.0 1.15 19.61 C, CN, T
10 1800 215T 170212.60 √ 2,153 C215T17FB44 180 575 10..0 91.7 1.15 19.61 C, CN, T
10 1800 215T LM34217 √ 2,290 AF4B10T65 165 575 10.7 91.7 1.00 18.84 A, US
Shaded model numbers are cast iron frame Continued To Next Page
Green items are Premium Efficient Note listing on inside back flap
IEC Motors
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
C/A - Check Availability
Note 12 - TENV
Note T - N/C T-Stats
DC Motors
237
Special Voltage Motors
575 Volt - Three Phase - TEFC
Motors
Pump
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Factor (Inches) Notes
Washguard
15 3600 254T 170198.60 √ 3,012 C254T34FB5 292 575 14.0 91.7 1.15 23.19 C, CN, T
15 1800 254T 170116.60 √ 3,441 C254T17FB11 290 575 14.5 92.4 1.15 23.19 C, CN, T
15 1800 254T LM17076 C/A 3,524 AF4B15T65 240 575 15.1 92.4 1.25 23.40 A, US
20 3600 256T 170199.60 √ 3,885 C256T34FB11 326 575 18.4 92.4 1.15 24.92 C, CN, T
20 1800 256T 170117.60 √ 3,846 C256T17FB5 332 575 19.0 93.0 1.15 24.92 C, CN, T
20 1800 256T LM17079 C/A 3,462 AF4B20T65 275 575 19.3 93.0 1.25 25.15 A, US
Duty Motors
25 3600 284TS 170224.60 √ 5,052 C284T34FB6 393 575 22.6 92.4 1.15 24.88 C, CN, T
Agricultural
25 1800 284T 170118.60 √ 4,770 C284T17FB6 395 575 23.6 93.6 1.15 26.26 C, CN, T
30 3600 286TS 170228.60 √ 5,963 C286T34FB6 423 575 27.0 93.0 1.15 24.88 C, CN, T
30 1800 286T 170119.60 √ 5,268 C286T17FB6 442 575 28.0 94.1 1.15 27.83 C, CN, T
30 1800 286T LM20086 C/A 5,391 AF4B30T65Y 408 575 30.0 93.6 1.25 27.88 A, US
40 3600 324TS 170232.60 √ 7,436 C324T34FB4 514 575 35.8 93.0 1.15 28.03 C, CN, T
40 1800 324T 170120.60 √ 6,998 C324T17FB6 538 575 36.8 94.1 1.15 29.53 C, CN, T
40 1800 324T LM14408 C/A 11,711 SF4B40T65Y 504 575 40.5 94.1 1.15 28.50 S, US
HVAC / Fan
50 3600 326TS LM14410 C/A 9,291 SF2B50TS65Y 558 575 45.0 93.0 1.15 S, US
Motors
50 1800 326T 170121.60 √ 8,451 C326T17FB8 597 575 46.0 94.1 1.15 31.02 C, CN, T
50 1800 326T LM14411 C/A 11,962 SF4B50T65Y 558 575 51.0 94.5 1.25 30.00 S, US
60 3600 364TS LM18370 C/A 11,522 SF2B60TS65Y 765 575 53.0 95.0 1.25 29.77 S, US
60 1800 364T 170239.60 √ 12,019 C364T17FB7 676 575 54.8 93.6 1.15 32.64 C, CN, T
60 1800 364T LM18369 C/A 14,265 SF4B60T65Y 575 58.0 95.0 1.25 31.90 S, US
75 3600 365TS LM18376 C/A 16,820 SF2B75TS65Y 822 575 65.5 95.0 1.25 30.77 S, US
Special Voltage
75 1800 365T 170244.60 √ 15,826 C365T17FB5 753 575 68.0 94.1 1.15 33.62 C, CN, T
Motors
75 1800 365T LM18375 C/A 16,188 SF4B75T65Y 822 575 71.0 95.4 1.25 32.90 S, US
100 3600 405TS LM18290 C/A 20,287 SF2B100TS65Y 1,002 575 85.0 94.1 1.15 35.40 S, US
100 1800 405T 170253.60 √ 18,652 C405T17FB5 1,090 575 90.5 95.4 1.15 37.91 C, CN, T
100 1800 405T LM18307 C/A 19,555 SF4B100T65Y 1,002 575 94.5 95.4 1.15 38.40 S, US
100 1200 444T LM15121 C/A 28,265 SF6B100T65Y 1,401 575 109.0 95.0 1.15 41.58 S, US
125 3600 444TS LM15119 C/A 30,306 SF2B125TS65Y 1,351 575 106.0 95.0 1.15 37.49 S, US
Purpose Motors
125 1800 444T LM15120 C/A 26,141 SF4B125T65Y 1,351 575 117.0 96.2 1.15 41.58 S, US
Definite
150 3600 445TS LM34432 C/A 28,849 SF2B150TS65Y 1,351 575 134.0 95.8 1.15 —— S, US
150 1800 445T LM15126 C/A 32,863 SF4B150T65Y 1,531 575 134.0 96.2 1.15 43.56 S, US
200 3600 445TS LM15122 C/A 40,232 SF2B200TS65Y 1,531 575 170.0 95.8 1.15 —— S, US
200 1800 445T LM15123 C/A 39,561 SF4B200T65Y 1,531 575 182.0 96.2 1.15 43.58 S, US
250 3600 447TS LM34340 C/A 47,363 SF2B250TS65Y 1,812 575 211.0 95.8 1.00 —— S, US
250 1800 447T LM15130 C/A 39,344 SF4B250T65Y 1,812 575 226.0 95.4 1.15 47.08 S, US
Brake Motors
300 3600 449TS LM15138 C/A 71,489 S449F2B300TS65Y 2,185 575 251.0 95.8 1.15 —— S, US
300 1800 449T LM15129 C/A 51,683 SF4B300T65Y 1,812 575 270.0 96.2 1.15 47.08 S, US
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
C/A - Check Availability
Note T - N/C T-Stats
IEC Motors
DC Motors
238
Special Voltage Motors
575 Volt - TEFC - C Face Less Base
Motors
Pump
Three Phase - TEFC/TENV - C Face Less Base
App. F.L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Factor (Inches) Notes
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 575V Eff.
Motors
1/2 1800 56C 110176.00 √ 574 C6T17NC10 20 575 0.7 78.5 1.15 9.90 S, US, 12
3/4 1800 56C 110177.00 √ 615 C6T17FC7 21 575 1.1 77.0 1.15 10.48 S, US, 13
1 1800 56C 119542.00 √ 1,059 C6T17FC251 34 575 1.3 85.5 1.15 12.48 S, US, 13
1 1800 143TC 122227.00 √ 1,059 C143T17FC46 35 575 1.3 85.5 1.15 12.67 S, US, 13
1 1/2 1800 56C 119543.00 √ 1,117 C6T17FC252 37 575 1.9 86.5 1.15 12.98 S, US, 13
1 1/2 1800 145TC 122228.00 √ 1,117 C145T17FC134 38 575 1.9 86.5 1.15 13.42 S, US, 13
Duty Motors
2 3600 56C 119544.00 √ 1,114 C6T34FC133 42 575 1.9 85.5 1.15 12.98 S, US, 13
Agricultural
2 1800 145TC 122229.00 √ 1,114 C145T17FC129 43 575 2.3 86.5 1.15 13.92 S, US, 13
3 1800 182TC 132461.00 √ 1,258 C182T17FC43 75 575 3.1 89.5 1.15 13.97 S, US, 13
5 1800 184TC 132462.00 √ 1,358 C184T17FC52 99 575 5.1 89.5 1.15 15.47 S, MX, 13
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
HVAC / Fan
Motors
Three Phase - TEFC - C Face With Base
App. F.L. “C”
Stock
Special Voltage
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 575V Eff. Factor (Inches) Notes
Motors
1/2 1800 56C LM24355 C/A 625 SRF4S0.5TC65 18 575 0.9 70.0 1.15 10.69 S, MX
3/4 1800 56C LM24354 C/A 723 SRF4S0.75TC65 21 575 1.1 75.5 1.15 11.19 S, MX
1 3600 56C LM34221 C/A 767 SRF2B1TC65 26 575 1.2 78.5 1.15 11.81 S, US
1 1800 56C LM34218 √ 1,190 SRF4B1TC65 30 575 1.3 85.5 1.15 14.15 S, MX
1 1800 143TC LM34222 C/A 1,096 SSF4B1TC65 41 575 1.3 85.5 1.00 — S, MX
1 1/2 3600 56C LM34225 C/A 980 SRF2B1.5TC65 41 575 1.6 84.0 1.15 13.32 S, MX
Purpose Motors
1 1/2 1800 56HC LM34223 √ 1,136 SRF4B1.5TC65 47 575 1.9 86.5 1.15 14.65 S, MX
Definite
1 1/2 1800 145TC LM34224 C/A 1,136 SSF4B1.5TC65 49 575 1.9 86.5 1.15 — S, MX
2 3600 56HC LM34227 C/A 1,070 SRF2B2TC65 49 575 2.0 85.5 1.15 14.32 S, US
2 1800 56HC LM34228 C/A 1,187 SRF4B2TC65 55 575 2.4 86.5 1.15 15.07 S, US
2 1800 145TC LM34229 C/A 1,187 SSF4B2TC65 51 575 2.4 86.5 1.15 — S, MX
3 3600 182TC LM33611 C/A 1,438 AF2B3TC65AP26 95 575 3.1 87.5 1.15 15.19 A, MX
3 1800 182TC LM33613 C/A 1,273 AF4B3TC65AP26 95 575 3.1 89.5 1.15 15.19 A, MX
5 3600 184TC LM33615 C/A 1,638 AF2B5TC65AP26 104 575 4.8 88.5 1.25 15.19 A, MX
Brake Motors
5 1800 184TC LM33617 C/A 1,477 AF4B5TC65AP26 104 575 5.1 89.8 1.00 16.19 A, MX
5 1200 215TC LM34230 C/A 2,356 AF6B5TC65 149 575 5.5 89.5 1.15 18.70 A, US
239
Special Voltage Motors
TEFC - 575 Volt - C Face With Base
Motors
Pump
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
Factor (Inches) Notes
Washguard
7 1/2 3600 213TC LM17186 C/A 1,986 AF2B7.5TC65 138 575 7.1 90.2 1.25 17.20 A, US
7 1/2 1800 213TC LM17187 C/A 1,916 AF4B7.5TC65 138 575 7.7 91.7 1.25 19.70 A, US
10 3600 215TC LM17189 C/A 2,481 AF2B10TC65 149 575 9.5 91.7 1.25 19.61 A, US
10 1800 215TC LM17190 C/A 2,389 AF4B10TC65 149 575 10.8 91.0 1.25 18.70 A, US
15 3600 254TC LM17192 C/A 3,270 AF2B15TC65 221 575 14.0 91.7 1.25 23.19 A, US
15 1800 254TC LM17193 C/A 2,946 AF4B15TC65 221 575 15.1 92.4 1.25 23.40 A, US
Duty Motors
20 3600 256TC LM17195 C/A 3,863 AF2B20TC65 248 575 19.2 91.0 1.25 24.24 A, US
Agricultural
20 1800 256TC LM17196 C/A 3,658 AF4B20TC65 248 575 19.3 93.0 1.25 25.15 A, US
25 3600 284TSC LM17198 C/A 5,413 AF2B25TSC65 370 575 22.8 93.0 1.25 25.12 A, US
25 1800 284TC LM17199 C/A 4,904 AF4B25TC65 370 575 25.6 93.6 1.25 26.62 A, US
30 3600 286TSC LM20087 C/A 6,044 AF2B30TSC65Y 415 575 26.4 93.0 1.25 26.62 A, US
30 1800 286TC LM20088 C/A 6,373 AF4B30TC65Y 415 575 30.0 94.5 1.25 28.12 A, US
40 3600 324TSC LM14561 C/A 7,751 SF2B40TSC65Y 514 575 36.0 94.1 1.25 28.03 S, US
40 1800 324TC LM14562 C/A 7,467 SF4B40TC65Y 514 575 42.4 94.1 1.25 28.50 S, US
HVAC / Fan
50 3600 326TSC LM14564 C/A 9,721 SF2B50TSC65Y 568 575 45.0 94.1 1.25 28.50 S, US
Motors
50 1800 326TC LM14565 C/A 8,875 SF4B50TC65Y 568 575 51.6 95.0 1.25 30.00 S, US
60 3600 364TSC LM20037 C/A 12,209 SF2B60TSC65Y 777 575 53.0 95.0 1.25 29.77 S, US
60 1800 364TC LM20038 C/A 14,413 SF4B60TC65Y 778 575 58.0 95.0 1.25 31.90 S, US
75 3600 365TSC LM20040 C/A 15,536 SF2B75TSC65Y 834 575 66.5 95.0 1.25 30.77 S, US
75 1800 365TC LM20041 C/A 15,404 SF4B75TC65Y 834 575 73.0 95.0 1.15 32.90 S, US
100 3600 405TSC LM20043 C/A 24,564 SF2B100TSC65Y 1,018 575 84.0 94.5 1.15 33.87 S, US
Special Voltage
100 1800 405TC LM20044 C/A 21,955 SF4B100TC65Y 1,001 575 97.5 95.4 1.15 36.87 S, US
Motors
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
240
Special Voltage Motors
575 Volt Motors - Drip-Proof - Rigid Base
Motors
Pump
Three Phase - Drip-Proof - Rigid Base
Washguard
Motors
App. F.L. “C”
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 575V Eff. Factor (Inches) Notes
1/3 1800 56 LM34061 √ 552 SRD4B0.33T65 23 575 0.5 73.4 1.15 11.22 S, MX
1/2 1800 56 LM34062 C/A 641 SRD4B0.5T65 30 575 0.7 78.2 1.25 11.32 S, MX
3/4 1800 56 LM34063 C/A 706 SRD4B0.75T65 30 575 2.9 81.1 1.15 11.70 S, MX
Duty Motors
1 3600 56 LM34064 C/A 793 SRD2B1T65 30 575 1.2 77.0 1.00 11.43 S, US
Agricultural
1 1800 56 LM34065 √ 862 SRD4B1T65 30 575 1.2 83.5 1.15 12.07 S, US
1 1/2 3600 56 LM34066 C/A 849 SRD2B1.5T65 35 575 1.7 84.0 1.15 12.70 S, US
1 1/2 1800 56H LM34067 √ 894 SRD4B1.5T65 37 575 1.9 86.5 1.15 14.16 S, MX
2 3600 56H LM34068 √ 991 SRD2B2T65 30 575 2.2 85.5 1.15 13.33 S, US
2 1800 56H LM25063 D 746 SRD4S2T65 36 575 2.5 81.5 1.15 11.94 S, US
2 1800 56H LM34069 √ 1,010 SRD4B2T65 42 575 2.4 86.5 1.15 13.44 S, US
10 1800 215T LM34231 C/A 1,425 SSD4B10T65 138 575 10.0 91.7 1.25 17.29 S, MX
HVAC / Fan
15 1800 254T LM34118 C/A 2,613 SSD4B15T65 215 575 15.4 93.0 1.25 22.32 S, US
Motors
20 1800 256T LM34123 C/A 4,128 SSD4B20T65 233 575 20.8 93.0 1.25 — S, US
25 1800 284T LM34126 C/A 3,899 CCD4B25T65Y 350 575 25.6 93.6 1.25 24.94 C, US
30 1800 286T LM34119 C/A 4,520 CCD4B30T65Y 400 575 29.6 94.1 1.25 26.81 C, US
40 1800 324T LM34120 C/A 10,930 SD4B40T65Y 469 575 41.5 94.1 1.25 25.82 S, US
50 1800 326T LM34341 C/A 9,765 SD4B50T65Y 522 575 52.0 94.5 1.25 — S, US
60 1800 364T LM34342 C/A 14,974 SD4B60T65Y 712 575 58.0 95.0 1.25 — S, US
Special Voltage
75 1800 365T LM34121 C/A 15,242 SD4B75T65Y 763 575 70.5 95.0 1.25 29.40 S, US
Motors
100 1800 404T LM34127 C/A 16,786 SD4B100T65Y 882 575 122.0 95.4 1.25 33.31 S, US
125 1800 405T LM18306 C/A 13,183 SD4B125T65Y 958 575 122.0 94.5 1.25 33.31 S, US
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
241
Special Voltage Motors
200/400 Volt - Drip-Proof - Rigid Base
Motors
Pump
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame Number Price Model Number (lbs) Voltage @ 200V Eff. Factor (Inches) Notes
2 1800 145T LM34232 C/A 961 SSD4B2T62 48 200/400 6.9 86.5 1.15 14.37 S, MX
3 1800 182T LM34233 C/A 992 SSD4B3T62 75 200/400 9.2 89.5 1.15 13.19 S, MX
5 1800 184T 132463.00 √ 1,087 C184T17DB87 62 200-208/400-416 13.9 89.5 1.15 14.19 S, MX
7 1/2 1800 213T 141286.00 √ 1,364 C213T17DB27 133 200-208/400-416 22.1 91.0 1.15 16.30 S, MX
Duty Motors
Agricultural
10 1800 215T 141287.00 √ 1,612 C215T17DB63 138 200-208/400-416 29.0 91.7 1.15 17.30 S, MX
15 1800 254T LM34128 C/A 2,613 SSD4B15T62 164 200/400 44.0 93.0 1.15 22.32 S, US
20 1800 256T LM34129 C/A 3,014 SSD4B20T62 200 200/400 56.5 93.6 1.15 22.10 S, US
25 1800 284T LM34130 C/A 4,695 CCD4B25T62Y 278 200/400 73.5 93.6 1.15 24.94 S, US
30 1800 286T LM30696 C/A 4,913 CCD4B30T62Y 325 200/400 84.0 94.1 1.15 26.81 S, US
40 1800 324T LM34149 √ 11,852 SD4B40T62 378 200/400 — 94.1 1.15 — S, US
1 1800 143T 122231.00 C/A 908 C143T17FB35 35 200-208 3.2 85.5 1.15 12.93 S, US
Definite
1 1/2 1800 145T 122232.00 √ 943 C145T17FB106 41 200-208 4.8 86.5 1.15 12.93 S, US
2 1800 145T 122233.00 C/A 981 C145T17FB105 49 200-208 6.6 86.5 1.15 13.93 S, US
3 3600 182T LM33621 C/A 1,148 AF2B3T62AP26 73 200/400 — 86.5 1.15 — A, MX
3 1800 182T 132465.00 √ 1,108 C182T17FB60 85 200-208/400-416 10.0 89.5 1.15 13.96 S, MX
5 1800 184T 132466.00 √ 1,219 C184T17FB76 87 200-208/400-416 14.4 89.5 1.15 14.97 S, MX
5 1800 184T LM33624 C/A 1,372 AAF4B5T62AP26 80 200/400 14.5 89.5 1.25 15.19 A, MX
7 1/2 1800 213T 141289.00 √ 1,565 C213T17FB25 146 200-208/400-416 22.6 91.7 1.15 18.73 S, MX
Brake Motors
10 1800 215T 141290.00 √ 1,893 C215T17FB34 164 200-208/400-416 30.5 91.7 1.15 20.23 S, MX
15 1800 254T LM32691 C/A 2,964 AF4P15T62 202 200/400 43.5 92.4 1.15 23.52 A, US
20 1800 256T LM34134 C/A 3,462 AF4B20T62 225 200/400 55.5 93.0 1.15 25.15 A, US
Green items are Premium Efficient Note listing on inside back flap
C/A - Check Availability Specifications are subject to change without notice
IEC Motors
DC Motors
242
Special Voltage Motors
50 Hertz Motors - Single Phase - Rigid Base
Motors
Pump
General Specifications:
50 Hz single phase designs produce full rated HP on 50 Hz
power supply. Designed for general purpose applications.
Washguard
Motors
Features:
• High efficiency energy saving designs
• Centrifugal switch designed for 50 Hz service
• High torque
Duty Motors
Agricultural
Single Phase - Drip-Proof - Rigid Base - IP22
App. F.L. “C”
Stock
HVAC / Fan
3/4 3000 56 113902.00 C/A 642 C6C28DB25 30 110/220 5.6 1.25 10.34 S, US
Motors
3/4 1500 56 110396.00 √ 869 C6C14DB7 33 110/220 5.9 1.25 10.84 S, US
1 3000 56 113903.00 √ 712 C6C28DB26 34 110/220 6.6 1.25 10.84 S, US
1 1500 56H 110397.00 √ 956 C6C14DB8 38 110/220 6.4 1.15 11.84 S, US, 6
1 1/2 3000 56H 113904.00 √ 913 C6C28DB27 40 110/220 8.6 1.15 11.84 S, US
1 1/2 1500 56H 110398.00 √ 1,080 C6K14DB1 46 110/220 8.4 1.15 12.34 S, US, 6, 53
2 3000 56H 113905.00 √ 1,119 C6C28DB28 45 110/220 10.7 1.15 12.34 S, US
Special Voltage
2 1500 182T 131553.00 C/A 1,298 C182C14DB3 73 220 11.8 1.15 13.69 S, US
Motors
3 3000 56H 113937.00 √ 1,325 C6K28DB5 50 220 12.4 1.15 12.84 S, US
3 1500 184T 131554.00 √ 1,484 C184C14DB2 83 220 16.8 1.15 14.69 S, MX
5 1500 184T 131555.00 √ 3,035 C184K14DB9 98 220 23.2 1.15 15.69 S, MX, 53
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
243
Special Voltage Motors
50 Hertz Motors - Single Phase - Rigid Base
Motors
Pump
Stock
RPM NEMA Catalog List Wgt. Amps Service Dim.
HP 50 Hz Frame Number Price Model Number (lbs) Voltage @ 220V Factor (Inches) Notes
1/3 3000 56 113916.00 √ 528 C6C28FB25 28 110/220 3.2 1.00 10.98 S, US
1/3 1500 56 110423.00 √ 666 C6C14FB6 27 110/220 3.2 1.00 10.98 S, US
1/3 1500 56 113908.00 √ 674 M6C14FB22 23 110/220 3.2 1.00 10.98 S, US
Duty Motors
1 1/2 3000 56H 113920.00 √ 977 C6C28FB29 47 110/220 8.0 1.00 13.48 S, US
1 1/2 1500 56H 110424.00 √ 1,193 C6K14FB1 50 110/220 8.6 1.00 13.49 S, US, 6, 53
1 1/2 1500 56H 113929.00 √ 1,087 P6K14FB9 52 110/220 8.6 1.00 13.48 S, US, 6, 53
2 3000 56HZ 113928.00 √ 1,183 C6C28FB24 47 110/220 10.7 1.00 13.93 S, US, 3
2 1500 182T 131556.00 √ 1,788 C182C14FB6 98 220 11.2 1.00 15.46 S, MX
2 1500 182T 131600.00 C/A 1,765 P182C14FB5 74 220 12.0 1.00 14.96 S, MX
Special Voltage
3 3000 145T 121070.00 √ 1,455 C145K28FB6 53 220 12.4 1.00 14.43 S, US, 53
Motors
3 3000 56H 113936.00 √ 1,455 C6K28FB2 51 220 12.4 1.00 13.98 S, US, 53
3 1500 184T 131557.00 √ 2,553 C184C14FB6 101 220 15.9 1.00 16.96 S, MX
3 1500 184T 131601.00 √ 2,515 P184C14FB7 101 220 15.9 1.00 16.96 S, MX
5 3000 184T 131638.00 √ 1,685 C184K28FB2 101 220 20.5 1.00 17.46 S, MX, 53
5 1500 184T 131578.00 √ 3,242 C184K14FB5 83 220 21.0 1.00 17.46 S, MX, 53
5 1500 213TZ 140475.00 C/A 3,255 P213K14FB1 166 220 24.5 1.00 18.71 S, MX, 53
Purpose Motors
244
Special Voltage Motors
50 Hertz Motors - Single Phase
Motors
Pump
Single Phase - TEFC - C Face Less Base - IP54
App. Over- F.L. “C”
Stock
RPM NEMA Catalog List Wgt. load Amps Service Dim.
HP 50 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 220V Factor (Inches) Notes
Washguard
Motors
1/3 1500 56C 113921.00 √ 686 M6C14FC5 24 110/220 Man. 3.2 1.00 10.98 S, US
1/2 3000 56C 113912.00 √ 589 C6C28FC3 28 110/220 None 3.8 1.00 11.48 S, US
1/2 1500 56C 113922.00 √ 786 M6C14FC6 26 110/220 Man. 4.1 1.15 11.48 S, US
3/4 3000 56C 113913.00 √ 654 C6C28FC4 31 110/220 None 5.6 1.00 11.48 S, US
3/4 1500 56C 113923.00 √ 899 M6C14FC7 34 110/220 Man. 5.9 1.00 11.98 S, US
1 3000 56C 113914.00 √ 809 C6C28FC5 35 110/220 None 6.6 1.00 11.98 S, US
1 1500 56C 113924.00 √ 947 M6C14FC8 37 110/220 Man. 6.4 1.00 12.48 S, US
Duty Motors
Agricultural
1 1/2 3000 56C 113915.00 √ 1,052 C6C28FC6 46 110/220 None 8.0 1.00 13.48 S, US
1 1/2 1500 56C 113925.00 √ 1,147 P6K14FC4 45 110/220 Man. 8.6 1.00 13.49 S, US, 53
2 3000 145TC 120990.00 √ 1,215 C145K28FC2 50 110/220 None 8.6 1.15 13.93 S, US, 53
2 1500 182TC 131599.00 C/A 1,808 P182C14FC2 73 220 Man. 12.0 1.00 14.94 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
50 Hertz Motors - Three Phase
Motors
General Specifications:
Totally enclosed fan cooled, 12-lead motors designed specifically for 50 Hz service. These motors are
intended for equipment built in North America and destined for use in 50 Hz service areas around the world.
Features:
Special Voltage
• Suitable for 220/380 volt 50Hz, or 440 volt 50Hz, three phase power
Motors
• Torques exceed NEMA® performance for Design B motors
• Construction meets IP54 protection standards
• Class F insulation
Purpose Motors
Three Phase - TEFC - Rigid Base
Definite
App. F.L. “C”
Stock
Brake Motors
0.25/1/3 1500 S56 102183.00 √ 624 C4T14FH1 22 220/380/440 1.1 65.0 1.15 9.69 S, MX
0.37/1/2 3000 48 102690.00 C/A 642 C4T28FB1 21 220/380/440 1.0 77.3 1.15 9.31 S, US
0.37/1/2 1500 48 102692.00 √ 754 C4T14FB3 20 220/380/440 1.4 72.0 1.15 9.81 S, MX
0.37/1/2 1500 S56 102693.00 √ 697 C4T14FH2 20 220/380/440 1.4 72.0 1.15 10.19 S, MX
0.37/1/2 1500 56 114304.00 √ 750 C6T14NB1 28 220/380/440 1.2 74.0 1.15 10.40 S, US, 12
0.55/3/4 3000 56 114306.00 C/A 680 C6T28FB4 27 220/380/440 1.8 72.0 1.15 10.48 S, US
0.55/3/4 1500 56 114307.00 √ 798 C6T14FB7 27 220/380/440 1.9 74.0 1.15 10.98 S, US
0.75/1 3000 56 114308.00 √ 812 C6T28FB5 31 220/380/440 2.4 71.0 1.15 10.98 S, US
IEC Motors
0.75/1 1500 56 114888.00 √ 807 C6T14FB8 31 220/380/440 2.0 77.0 1.15 10.98 S, US
0.75/1 1500 143T 121096.00 √ 807 C143T14FB2 38 220/380/440 2.0 77.0 1.15 12.43 S, US
1.1/1 1/2 3000 145T 121097.00 C/A 836 C145T28FB4 37 220/380/440 2.9 80.0 1.15 12.43 S, US
1.1/1 1/2 1500 145T 121093.00 √ 836 C145T14FB13 36 220/380/440 3.3 75.5 1.15 12.43 S, US
1.5/2 3000 145T 121094.00 C/A 905 C145T28FB5 45 220/380/440 3.6 80.0 1.15 12.43 S, US
1.5/2 1500 145T 121095.00 √ 947 C145T14FB14 42 220/380/440 3.7 81.5 1.15 13.18 S, US
2.2/3 3000 182T 131480.00 √ 1,167 C182T28FB3 61 220/380/440 4.8 82.5 1.15 13.46 S, MX
DC Motors
2.2/3 1500 182T 131459.00 √ 1,118 C182T14FB5 68 220/380/440 4.7 82.5 1.15 13.46 S, MX
3.7/5 3000 184T 131481.00 √ 1,375 C184T28FB14 79 220/380/440 7.4 84.0 1.15 14.46 S, MX
3.7/5 1500 184T 131454.00 √ 1,274 C184T14FB7 85 220/380/440 8.1 87.5 1.00 16.46 S, MX
C/A - Check Availability Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Stock
RPM NEMA Catalog List Wgt. Amps % F.L. Service Dim.
KW/HP 50 Hz Frame Number Price Model Number (lbs) Voltage @ 380V Eff. Factor (Inches) Notes
0.18/1/4 1500 S56C 102184.00 √ 589 C4T14FC2 21 220/380/440 1.0 56.0 1.15 9.44 S, MX
0.25/1/3 3000 S56C 102687.00 √ 582 C4T28FC2 16 220/380/440 0.8 60.0 1.15 9.69 S, US
0.25/1/3 1500 S56C 102689.00 √ 639 C4T14FC4 16 220/380/440 1.1 65.0 1.15 9.69 S, MX
Duty Motors
Agricultural
0.25/1/3 1500 56C 114889.00 √ 683 C6T14FC5 21 220/380/440 1.0 68.0 1.15 10.21 S, US
0.37/1/2 3000 S56C 102691.00 √ 676 C4T28FC1 20 220/380/440 1.0 77.3 1.15 9.69 S, US
0.37/1/2 1500 S56C 102694.00 √ 750 C4T14FC3 20 220/380/440 1.4 72.0 1.15 10.19 S, MX
0.37/1/2 1500 56C 114891.00 √ 757 C6T14FC4 23 220/380/440 1.2 73.0 1.15 10.48 S, US
0.37/1/2 1200 56C 114892.00 √ 907 C6T9FC1 31 220/380/440 1.5 68.0 1.15 11.21 S, US
0.55/3/4 3000 56C 114893.00 √ 680 C6T28FC1 27 220/380/440 1.8 72.0 1.15 10.48 S, US
0.55/3/4 1500 56C 114894.00 √ 809 C6T14FC6 26 220/380/440 1.9 74.0 1.15 10.98 S, US
HVAC / Fan
0.75/1 3000 56C 114895.00 √ 818 C6T28FC3 25 220/380/440 2.4 71.0 1.15 10.98 S, US
Motors
0.75/1 1500 56C 114896.00 √ 842 C6T14FC7 31 220/380/440 2.0 77.0 1.15 10.98 S, US
0.75/1 1500 143TC 121272.00 √ 842 C143T14FC2 34 220/380/440 2.0 77.0 1.15 11.42 S, US
0.75/1 1200 145TC 121273.00 √ 969 C145T9FC3 42 220/380/440 2.7 74.7 1.15 12.92 S, US
1.1/1 1/2 3000 143TC 121274.00 C/A 869 C143T28FC1 36 220/380/440 2.9 80.0 1.15 11.92 S, US
1.1/1 1/2 1500 145TC 121275.00 √ 879 C145T14FC6 40 220/380/440 3.3 75.5 1.15 12.42 S, US
1.5/2 3000 145TC 121276.00 √ 870 C145T28FC1 44 220/380/440 3.6 80.0 1.15 12.42 S, US
Special Voltage
1.5/2 1500 145TC 121277.00 √ 948 C145T14FC5 41 220/380/440 3.7 81.5 1.15 13.42 S, US
Motors
2.2/3 3000 182TC 131505.00 √ 1,189 C182T28FC2 62 220/380/440 4.8 82.5 1.15 13.97 S, MX
2.2/3 1500 182TC 131506.00 √ 1,102 C182T14FC3 66 220/380/440 4.7 82.5 1.15 13.97 S, MX
3.7/5 3000 184TC 131507.00 √ 1,406 C184T28FC3 78 220/380/440 7.4 84.0 1.15 14.47 S, MX
3.7/5 1500 184TC 131508.00 √ 1,259 C184T14FC3 84 220/380/440 8.1 87.5 1.00 15.47 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
Motors
Pump
2300/4000 Volts - Three Phase - Foot Mount
Applications Notes:
Ideally suited for applications requiring heavy duty,
Washguard
large horsepower electric motors. Typical uses include
Motors
pulp and paper mills, mineral processing, waste
management facilities, lumber and wood processing
mills, automobile manufacturing plants and other
severe duty environments where medium voltage
power is available.
Duty Motors
Agricultural
Features Frames 447T - 449T:
• Full cast iron construction
• Double shielded radial ball bearings
• Designed for direct coupled loads
(contact your local sales office about belted loads)
• Grease fittings with extended grease tubes
HVAC / Fan
• Internal and external epoxy finish
Motors
• Premium Class H insulation system
• Front and rear cast iron bearing caps
Special Voltage
• Full cast iron construction
Motors
• Double shielded radial ball bearings
• Designed for direct coupled loads
(contact your local sales office about belted loads)
• Grease fittings with extended grease tubes
• Corrosion resistant breather/drains
Purpose Motors
• Oversized cast iron terminal box
Definite
• Internal and external epoxy finish
• Premium Class H insulation system
• Inpro/Seal®* bearing isolators on each end
• Front and rear cast iron bearing caps
• Provision for jacking bolts in all four feet
• Provision for dowel pins in drive end feet
Brake Motors
• Grounding points located in terminal box and feet
• 100 ohm platinum winding RTDs as standard on sizes 400 HP and larger
• Two-Speed Motors
• Crusher Duty Motors
• Elevator Duty Motors
• Unit Handling Motors
• Export Only General Purpose Motors
Special Voltage
Motors
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
248
Definite Purpose Motors
Compressor Duty Motors
Motors
Pump
General Specifications:
Motors designed for air compressor, pump, and fan and
blower duty applications which require high breakdown
torque and rugged mechanical construction.
Washguard
Motors
Mechanical Features:
• Double shielded ball bearings
• Designed for belted loads
Electrical Features:
Duty Motors
Agricultural
• High efficient copper windings
• High starting and breakdown torque
• Dual rotation
HVAC / Fan
Motors
App. Over- F. L. “C”
Stock
Special Voltage
1 1⁄2 1800 145T 120042.00 √ 819 C145K17DB5 43 115/208-230 None 8.6 1.15 12.28 S, US, 53
Motors
1 1⁄2 1800 145T LM24687 √ 933 SSD4S1.5T1C602 39 115/208-230 None 9.0 1.15 12.49 S, US
1 1⁄2 1800 145T 120004.00 √ 1040 P145K17DB3 43 115/208-230 Man. 8.6 1.15 12.28 S, US, 53
2 3600 56 110232.00 √ 623 M6C34DB11 34 115/230 Man. 11.0 1.00 11.88 S, US
2 1800 182T 131515.00 √ 1011 C182C17DB8 59 115/208-230 None 12.4 1.15 13.19 S, MX
2 1800 182T 131536.00 √ 1082 P182C17DB10 66 115/208-230 Man. 12.4 1.15 13.19 S, MX
3 3600 56Y 110222.00 √ 698 M6C34DB13 41 230 Man. 15.0 1.15 12.28 S, US, 36
Purpose Motors
3 1800 184T 131534.00 √ 1095 C184C17DB19 78 115/230 None 16.9 1.15 14.19 S, MX
Definite
5SPL 3600 56 116523.00 √ 842 P6K34DB22 30 208-230 Man. 15.0 1.00 11.44 S, US, 53
5 3600 56Y 111275.00 √ 868 P6K34DB5 47 230 Man. 20.8 1.00 13.34 S, US, 36, 53
5 3600 56Y 116789.00 √ 895 P6K34DB27 52 230 Man. 20.8 1.00 13.34 S, US, 10, 53
5 3600 145T 120554.00 √ 877 P145K34DB1 49 230 Man. 20.8 1.00 13.20 S, US, 53
5 1800 184T 131537.00 √ 1,313 C184K17DB31 86 208-230 None 21.0 1.15 14.69 S, MX, 53
5 1800 184T LM24682 √ 1,343 SSD4S5T1B600 89 208-230 None 20.0 1.15 15.21 S, MX, 53
5 1800 184T 131622.00 √ 1,570 P184K17DB33 85 208-230 Man. 21.0 1.15 14.69 S, MX, 53
Brake Motors
7 1/2 3600 184T 132044.00 √ 1,266 C184K34DB8 110 208-230 Tstat 31.0 1.15 16.69 S, MX, 53
7 1/2 3600 213T 140680.00 √ 2,136 C213K34DB1 115 208-230 None 29.5 1.15 18.04 S, MX, 53
7 1/2 1800 215T 140155.00 √ 1,865 C215K17DB2 116 230 None 36.0 1.15 17.26 S, MX, 53
7 1/2 1800 215T LM24683 √ 1,967 SS215D4S7.5T1B600 116 208-230 None 34.5 1.15 18.05 S, MX, 53
10 3600 215T 140681.00 √ 2,702 C215K34DB1 126 208-230 None 37.0 1.15 19.29 S, MX, 53
10 1800 215TZ 140311.00 D 2,725 C215K17DB4 159 230 None 43.0 1.25 19.76 S, MX, 53
10 1800 215TZ 141430.00 √ 2,725 C215K17DB18 159 230 None 39.0 1.25 21.09 S, MX, 53
IEC Motors
10 1800 215TZ LM24684 √ 2,793 SSD4S10T1B600 140 208-230 None 44.0 1.15 19.29 S, MX, 53
5SPL - Breakdown torque of 5 HP, continuous duty as 3 HP motor Note listing on inside back flap
D- Item to be discontinued once inventory is depleted Specifications are subject to change without notice
DC Motors
249
Definite Purpose Motors
Compressor Duty Motors
Motors
Pump
Stock
RPM NEMA Catalog List Wgt. Amps @ % F.L. Service Dim.
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1 1800 143T 121003.00 √ 797 C143T17DB10 40 208-230/460 3.2 85.5 1.25 12.19 S, US, T
1 1800 143T LM24871 √ 659 SSD4B1T6 35 230/460 3.0 85.5 1.25 12.00 S, MX
1 1⁄2 1800 145T 121004.00 √ 832 C145T17DB32 44 208-230/460 4.8 86.5 1.25 12.69 S, US, T
1 1⁄2 1800 145T LM24875 √ 688 SSD4B1.5T6 45 230/460 4.4 86.5 1.25 12.99 S, MX
2 1800 145T 121005.00 √ 944 C145T17DB33 48 208-230/460 5.8 86.5 1.25 13.69 S, US, T
Duty Motors
2 1800 145T LM24169 √ 762 SSD4B2T6 48 230/460 6.0 86.5 1.25 13.49 S, MX
Agricultural
3 1800 182T 131519.00 √ 965 C182T17DB37 77 208-230/460 8.0 89.5 1.25 13.19 S, MX, T
3 1800 182T LM24222 √ 992 SSD4B3T61 89 230/460 8.0 89.5 1.25 13.19 S, MX
5 1800 184T 131520.00 √ 1,087 C184T17DB44 95 230/460 12.6 89.5 1.25 14.19 S, MX, T
5 1800 184T LM24202 √ 1,114 SSD4B5T61 89 230/460 12.6 89.5 1.25 14.19 S, MX
7 1⁄2 1800 213T 140470.00 √ 1,364 C213T17DB2 133 230/460 20.8 91.0 1.25 16.25 S, MX, T
7 1⁄2 1800 213T LM24194 √ 1,567 SSD4B7.5T6 158 230/460 19.2 91.0 1.25 18.54 S, US
10 1800 215T 140472.00 √ 1,612 C215T17DB15 144 230/460 26.8 91.7 1.25 17.25 S, MX, T
HVAC / Fan
Motors
10 1800 215T LM24193 √ 1,752 SSD4B10T6 156 230/460 25.0 91.7 1.25 18.54 S, MX
20 1800 256T 170006.60 √ 2,857 C256T17DB5 334 208-230/460 51.0 93.0 1.15 22.60 C, CN, T
20 1800 256T LM24199 √ 3,014 CCD4B20T6 354 230/460 48.0 93.0 1.25 24.37 C, US
3 1800 182T 131463.00 √ 1,108 C182T17FB32 83 230/460 7.8 89.5 1.15 13.96 S, MX, T
Definite
3 1800 182T LM32741 √ 1,108 SSF4B3T61 74 230/460 7.8 89.5 1.15 13.96 S, MX
5 1800 182T 131464.00 √ 1,219 C184T17FB42 87 230/460 12.6 89.5 1.15 14.96 S, MX, T
5 1800 182T LM33266 √ 1,219 SSF4B5T61 85 230/460 12.6 89.5 1.15 14.96 S, MX, T
7 1⁄2 1800 213T 140450.00 √ 1,565 C213T17FB6 153 230/460 21.6 91.7 1.25 18.70 S, MX, T
7 1⁄2 1800 213T LM32805 √ 1,446 SSF4B7.5T6 129 230/460 19.4 91.7 1.25 20.23 S, US
10 1800 215T 140451.00 √ 1,893 C215T17FB18 161 230/460 26.8 91.7 1.25 19.70 S, MX, T
Brake Motors
10 1800 215T LM32809 √ 1,784 SSF4B10T6 168 230/460 26.0 91.7 1.25 21.48 S, US
15 1800 254T 170066.60 √ 2,874 C254T17FB10 290 208-230/460 37.0 92.4 1.15 23.19 C, CN, T
15 1800 254T LM24208 √ 3,119 CCF4B15T6 360 230/460 37.5 92.4 1.25 23.52 C, US
20 1800 256T 170007.60 √ 3,596 C256T17FB4 332 208-230/460 50.0 93.0 1.15 24.92 C, CN, T
250
Definite Purpose Motors
Pressure Washer Motors
Motors
Pump
Motors specially suited for hot or cold pressure washer applications
and other single phase installations requiring minimum starting and
running amperages.
Mechanical Features:
Electrical Features:
Washguard
• Double shielded ball bearings
• Windings dipped in heavy duty
Motors
• Dynamically balanced rotors
varnish system
• Capacitor start / capacitor run
designs to reduce amp draw
• Manual reset overload protection
• High service factor
Duty Motors
Agricultural
Single Phase - Drip-Proof - Rigid Base
App. Over- F. L. “C”
Stock
HVAC / Fan
Motors
1 3600 56 110097.00 √ 550 M6C34DB3 30 115/208-230 Man. 6.0 1.25 10.84 S, US
1 1800 56 113630.00 √ 834 M6K17DB33 34 115/208-230 Man. 5.3 1.15 10.87 S, US, 53
1 1/2 3600 56 113631.00 √ 730 M6K34DB15 39 115/208-230 Man. 6.2 1.15 11.37 S, US, 53
1 1/2 1800 56H 113266.00 √ 973 M6K17DB30 45 115/208-230 Man. 6.7 1.15 12.37 S, US, 6, 53
1 1/2 1800 145T 120004.00 √ 1,040 P145K17DB3 43 115/208-230 Man. 8.6 1.15 12.28 S, US, 53
2 3600 56 113632.00 √ 986 P6K34DB16 39 115/208-230 Man. 8.6 1.15 11.37 S, US, 53
Special Voltage
2 1800 56H 116704.00 √ 1,040 P6K17DB47 45 115/208-230 Man. 8.6 1.15 12.68 S, US, 6, 53
2 1800 145T 120879.00 √ 1,094 P145K17DB38 54 115/208-230 Man. 8.6 1.15 14.25 S, US
Motors
3 3600 56H 116706.00 √ 1,048 M6C34DB75 39 230 Man. 15.0 1.00 12.38 S, US, 6, 53
3 1800 184T 131851.00 C/A 1,293 C184K17DB40 75 208-230 Man. 12.8 1.15 13.69 S, MX, 9
5 3600 56H 116708.00 √ 1,072 P6K34DB26 45 230 Man. 20.8 1.00 13.34 S, US, 6, 53
5 1800 184T 131622.00 √ 1,570 P184K17DB33 85 208-230 Man. 21.0 1.15 14.69 S, MX
C/A - Check Availability Note listing on inside back flap
Purpose Motors
Specifications are subject to change without notice
Definite
Single Phase - TEFC - Rigid Base
App. Over- F. L. “C”
Stock
Brake Motors
3/4 3600 56 110108.00 √ 562 M6C34FB7 29 115/208-230 Man. 5.0 1.15 11.48 S, US
3/4 1800 56 110022.00 √ 762 M6C17FB7 32 115/208-230 Man. 5.4 1.15 11.48 S, US
1 3600 56 110142.00 √ 686 M6C34FB2 31 115/208-230 Man. 6.0 1.15 11.98 S, US
1 1800 56 110023.00 √ 862 M6C17FB8 32 115/208-230 Man. 6.4 1.15 11.98 S, US
1 1800 143T 120008.00 √ 936 M143C17FB2 34 115/208-230 Man. 6.4 1.15 12.93 S, US
1 1⁄2 3600 56 110109.00 √ 945 M6C34FB8 34 115/208-230 Man. 8.5 1.00 12.48 S, US
1 1⁄2 1800 56H 113333.00 √ 976 M6K17FB32 41 115/208-230 Man. 8.6 1.00 12.99 S, US, 6, 53
1 1⁄2 1800 145T 120009.00 √ 976 M145K17FB2 45 115/208-230 Man. 8.6 1.00 12.93 S, US, 53
IEC Motors
2 3600 56H 110402.00 √ 1,101 P6C34FB23 44 115/208-230 Man. 10.0 1.00 13.48 S, US, 6, 53
2 3600 145T 120395.00 √ 1,114 P145C34FB5 47 115/208-230 Man. 10.0 1.00 13.93 S, US
2 1800 145T 120867.00 √ 1.401 P145K17FB22 45 115/208-230 Man. 9.2 1.00 13.93 S, US, 53
3 3600 56H 116705.00 √ 1,148 P6K34FB31 53 230 Man. 13.0 1.00 13.99 S, US, 6, 53
3 1800 184T 131855.00 √ 1,552 P184K17FB26 88 208-230 Man. 13.6 1.15 14.96 S, MX, 53
5 3600 184T 132042.00 √ 1.940 P184K34FB9 103 230 Man. 19.8 1.15 16.96 S, MX, 53
5 1800 184T 131856.00 √ 1.805 P184K17FB25 95 208-230 Man. 21.0 1.00 15.96 S, MX, 53
DC Motors
251
Definite Purpose Motors
Pressure Washer Motors
Motors
Pump
Stock
RPM NEMA Catalog List Wgt. load Amps Service Dim.
Notes
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Factor (Inches)
Motors
1 1⁄2 3600 56C 114214.00 √ 778 M6K34DK8 38 115/208-230 Man. 6.2 1.15 11.34 S, US
1 1⁄2 1800 56HC 113700.00 √ 1,027 M6K17DK15 41 115/208-230 Man. 7.2 1.15 11.84 S, US, 6, 53
2 3600 56C 114215.00 √ 987 P6K34DK9 38 115/208-230 Man. 8.6 1.15 11.34 S, US
2 1800 56HC 113281.00 √ 1,063 P6K17DK12 48 115/208-230 Man. 8.6 1.15 12.87 S, US, 6, 53
3 3600 56HC 116707.00 √ 1,078 M6C34DK5 41 230 Man. 15.0 1.00 12.84 S, US, 6, 53
3 1800 184TC 131853.00 √ 1,293 C184K17DK18 87 208-230 Man. 13.8 1.15 13.20 S, MX, 53
5 3600 56HC 116709.00 √ 1,102 P6K34DK18 51 230 Man. 20.8 1.00 13.84 S, US, 6, 53
Duty Motors
Agricultural
5 1800 184TC 131630.00 √ 1,591 M184K17DK13 90 208-230 Man. 21.0 1.15 14.70 S, MX, 53
Stock
1 1800 56C 115879.00 √ 874 M6C17FK80 32 115/208-230 Man. 6.4 1.15 11.98 S, US
Motors
1 1⁄2 3600 56C 115024.00 √ 892 M6K34FK16 38 115/208-230 Man. 6.2 1.15 12.49 S, US, 53
1 1⁄2 1800 56HC 116703.00 √ 1,044 M6K17FK50 39 115/208-230 Man. 8.6 1.15 13.37 S, US
2 3600 56HC 114995.00 √ 1,060 P6K34FK15 45 115/230 Man. 8.5 1.15 12.84 S, US, 53
2 1800 145TC 121465.00 √ 1,401 P145K17FK10 46 115/208-230 Man. 9.2 1.00 13.93 S, US
3 3600 56HC 115048.00 √ 1,160 P6K34FK17 53 208-230 Man. 13.0 1.00 13.98 S, US, 53
3 1800 184TC 131857.00 √ 1,979 P14K17FK14 107 230 Man. 12.8 1.15 14.97 S, MX, 53
Purpose Motors
5 3600 184TC 131632.00 √ 1,989 P184K34FK2 106 230 Man. 19.8 1.15 16.97 S, MX
Definite
5 1800 184TC 131633.00 √ 2,071 P184K17FK11 107 230 Man. 23.0 1.00 17.47 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
IEC Motors
DC Motors
252
Definite Purpose Motors
Woodworking Motors
Motors
Pump
General Specifications:
• Motors designed for woodworking equipment
such as table saws, planers, etc.
• Fully gasketed to prevent dust entry
Washguard
Motors
Single Phase - TEFC - Rigid Base
App. Over- F. L. “C”
RPM NEMA Catalog Stock List Wgt. load Amps Service Dim.
Duty Motors
Agricultural
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Factor (Inches) Notes
3/4 3600 56 110108.00 √ 562 M6C34FB7 29 115/208-230 Man. 5.0 1.15 11.48 S, US
1 3600 56 110142.00 √ 686 M6C34FB2 31 115/208-230 Man. 6.0 1.15 11.98 S, US
1 1⁄2 3600 56 110109.00 √ 945 M6C34FB8 34 115/208-230 Man. 8.5 1.00 12.48 S, US
2 3600 56H 110402.00 √ 1,101 P6C34FB23 44 115/208-230 Man. 10.0 1.00 13.48 S, US, 6
2 3600 145T 120395.00 √ 1,114 P145C34FB5 47 115/208-230 Man. 10.0 1.00 13.93 S, US
3 3600 145T 120341.00 √ 1,143 C145K34FB3 49 230 None 13.0 1.00 14.43 S, US, 53
HVAC / Fan
Note listing on inside back flap
Motors
Specifications are subject to change without notice
Special Voltage
App. Over- F. L. “C”
Stock
Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Factor (Inches) Notes
3 3600 145TC 120824.00 √ 1,235 P145K34FC6 56 230 Man. 13.0 1.00 14.43 S, US, 53
Note listing on inside back flap
Specifications are subject to change without notice
Purpose Motors
Definite
Table Saw Motor
General Specifications:
• Extra high breakdown torque
• 8 ft. cord with 115V plug
Brake Motors
• On/off toggle switch
• Replaces Delta® motor 62-042
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. @ 230 V Factor (Inches) Notes
1 1⁄2 3600 56 113627.00 √ 1,133 M6C34FB63 39 115/230 Man. 7.5 1.00 12.31 S, US
General Specifications:
• Motor pivots on rod for belt tensioning
• Extra high breakdown torques for maximum cutting power
• 3/4” Dia. Shaft, 1-3/4” long with keyway
Washguard
Motors
4 3600 145Y 120998.00 √ 1,482 C145K34FB16 56 230 17.6 1.00 12.86 S, US, 53
General Specifications:
• Designed for woodworking applications
• Electronic starting switch
• High starting and breakdown torques
Purpose Motors
Motors
Pump
Parking Gates, Door Operators & Slide Gates
General Specifications:
Specially designed motors for use on “instant-reversing”
Washguard
Motors
parking gates, doors, slide gates, or other moderate starting torque
instant reversing applications. Capable of frequent reversing service.
Features:
• Instant “plug-reversing” with simple three-wire connection
• Manual overload protected
Duty Motors
Agricultural
• Approx. 150% starting torque - not suitable for hard start applications
HVAC / Fan
1/3 1625 S56 103794.00 √ 622 M4P17DJ29 24 115 Man. 4.2 1.00 10.81 S, MX
Motors
1/2 1625 S56 100802.00 √ 686 M4P17DJ7 27 115 Man. 6.1 1.00 11.31 S, MX
1/2 1625 S56 103460.00 √ 508 5KCP35JNC128 22 115 Man. 5.0 1.00 9.94 S, MX
1/2 1625 S56 103821.00 √ 698 M4P17DJ33 26 115 Man. 5.1 1.00 10.81 S, MX, 47
3/4 1625 56H 113642.00 √ 819 M6P17DR4 36 115 Man. 7.2 1.00 12.32 S, US
Note 47 - Rated at 50 HZ at full rated HP Note listing on inside back flap
Specifications are subject to change without notice
Special Voltage
Motors
Purpose Motors
Definite
Single Phase - Drip-Proof - C Face Less Base
App. Over- F. L. “C”
Stock
Brake Motors
1/2 1625 S56C 100704.00 √ 686 M4P17DC7 16 115 Man. 5.1 1.00 10.24 S, MX, *
*Note - Motor has same electrical design as 102017, but is rated for intermittent duty. Note listing on inside back flap
Specifications are subject to change without notice
HP 60 Hz Frame Number Price Model Number (lbs) Voltage Prot. 230 V Factor (Inches) Notes
3/4 1800 56 114932.00 √ 878 P6C17FB113 33 115/208-230 Man. 5.4 1.15 11.24 S, MX
1 1800 56 114933.00 √ 962 P6C17FB112 36 115/208-230 Man. 6.4 1.15 11.74 S, MX
255
Definite Purpose Motors
Boat Hoist Duty Motors
Motors
Pump
Features Include:
• Stainless steel frame, base, capacitor case and conduit box cover
• 15 minute duty cycle
• Drain holes located at 6:00 position
• TENV enclosure
• Die cast aluminum endbells
Duty Motors
Agricultural
HP 60 Hz Frame Catalog Number Price Model Number (lbs) Voltage 230 V (Inches) Notes
1/2 1800 56C 6439191250 √ 527 6439191250 29 115/230 4.1 10.50 S, CN
3/4 1800 56C 6439191251 √ 570 6439191251 38 115/230 4.9 11.10 S, CN
1 1800 56C 6439191252 √ 620 6439191252 41 115/230 6.8 11.70 S, CN
1 1/2 1800 56C 6439191253 √ 722 6439191253 45 115/230 7.6 12.60 S, CN
Note listing on inside back flap
Special Voltage
256
Definite Purpose Motors
Two-Speed Motors
Motors
Pump
Three Phase - Variable and Constant Torque Designs
General Specifications:
Two-speed, single winding design motors.
See page 225 for typical characteristic speed torque curves.
Washguard
Motors
Variable Torque - 460 Volt - One Winding - TEFC - Rigid Base - 1800/900 RPM
App. F. L. “C”
Stock
RPM 60 NEMA Catalog List Wgt. Amps @ Service Dim.
HP Hz Frame Number Price Model Number (lbs) Voltage 460 V Factor (Inches) Notes
1 | 1/4 1800 | 900 143T 120945.00 C/A 1,163 C143T48FB7 39 460 1.5–0.7 1.00 12.75 S, US
1 1/2 | 3/8 1800 | 900 145T 120941.00 √ 1,210 C145T48FB60 39 460 2.4–1.0 1.00 12.75 S, US
Duty Motors
Agricultural
2 | 1/2 1800 | 900 145T 120940.00 C/A 1,411 C145T48FB48 39 460 3.2–1.3 1.00 12.75 S, US
3 | 3/4 1800 | 900 184T 131474.00 C/A 1,512 C184T48FB67 80 460 4.0–1.8 1.00 14.46 S, MX
5 | 1 1/2 1800 | 900 184T 131475.00 √ 1,928 C184T48FB68 98 460 6.5–2.5 1.00 15.96 S, MX
7 1/2 | 1 7/8 1800 | 900 215T 140447.00 √ 2,718 C215T48FB46 158 460 9.7–3.3 1.00 17.71 S, MX
10 | 2 1/2 1800 | 900 215T 140448.00 √ 3,203 C215T48FB48 171 460 12.7–4.2 1.00 18.71 S, MX
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
Variable Torque - 208-230 Volt - One Winding - TEFC - Rigid Base - 1800/900 RPM
App. F. L. “C”
Stock
Special Voltage
2 | 1/2 1800 | 900 145T 120946.00 √ 1,411 C145T48FB59 38 208-230 6.4–2.6 1.00 12.75 S, US
Motors
3 | 3/4 1800 | 900 184T 131468.00 √ 1,512 C184T48FB61 81 208-230 8.0–3.6 1.00 14.46 S, MX
5 | 1 1/2 1800 | 900 184T 131469.00 √ 1,928 C184T48FB62 97 208-230 13.0–5.0 1.00 15.96 S, MX
7 1/2 | 1 7/8 1800 | 900 215T 140443.00 C/A 2,745 C215T48FB45 157 208-230 19.4–6.6 1.00 17.71 S, MX
10 | 2 1/5 1800 | 900 215T 140444.00 C/A 3,203 C215T48FB47 169 208-230 25.4–8.4 1.00 18.71 S, MX
Purpose Motors
Specifications are subject to change without notice
Definite
Constant Torque - 460 Volt - One Winding - TEFC - Rigid Base - 1800/900 RPM
App. F. L. “C”
Stock
Brake Motors
3 | 1 1/2 1800 | 900 184T 131470.00 √ 2,407 C184T48FB63 83 460 3.8–3.5 1.00 14.96 S, MX
5 | 2 1/2 1800 | 900 215T 140445.00 C/A 3,144 C215T48FB43 148 460 6.7–7.0 1.00 17.71 S, MX
Constant Torque - 208-230 Volt - One Winding - TEFC - Rigid Base - 1800/900 RPM
IEC Motors
App. “C”
Stock
257
Definite Purpose Motors
Aggregate / Crusher Duty / Quarry Duty
Motors
Pump
Design Features:
• NEMA® Design C
• NEMA Premium efficient
Washguard
Motors
• Roller bearing - drive end only for belted load applications only
• Shaft seals - both ends
• 4140 grade high strength shaft material
• Full cast iron construction
• Inverter rated insulation system
• Epoxy painted
Duty Motors
Agricultural
• N/C thermostats
HP Hz Frame Number Price Model Number (lbs) Voltage 230 V Factor (Inches) Notes
Motors
50 1800 326T 194181.00 √ 8,955 C326T17WB1 756 230/460 116 1.15 33.86 C, CN
50 1200 365T 194182.00 √ 14,701 C365T11WB1 1070 230/460 120 1.15 36.61 C, CN
60 1800 364T 194183.00 √ 12,693 C364T17WB1 1009 230/460 138 1.15 36.61 C, CN
60 1200 404T 194184.00 √ 17,418 C404T11WB1 1341 230/460 144 1.15 42.72 C, CN
75 1800 365T 194185.00 √ 15,874 C365T17WB1 1110 230/460 170 1.15 36.61 C, CN
75 1200 405T 194186.00 √ 18,310 C405T11WB1 1441 230/460 178 1.15 42.72 C, CN
Special Voltage
100 1800 405T 194187.00 √ 19,732 C405T17WB1 1469 230/460 115 1.15 42.72 C, CN
Motors
100 1200 444T 194188.00 √ 26,041 C444T11WB1 2048 460 114* 1.15 50.78 C, CN
125 1800 444T 194189.00 √ 26,116 C444T17WB1 2200 460 140* 1.15 50.78 C, CN
125 1200 445T 194190.00 √ 29,402 C445T11WB1 2200 460 142* 1.15 50.78 C, CN
150 1800 445T 194191.00 √ 29,864 C445T17WB1 2200 460 165* 1.15 50.78 C, CN
150 1200 447T 194192.00 √ 33,151 C447T11WB1 2569 460 170* 1.15 50.78 C, CN
200 1800 447T 194193.00 √ 34,203 C447T17WB1 2200 460 225* 1.15 50.78 C, CN
Purpose Motors
200 1200 449T 194194.00 √ 43,407 C449T11WB1 2656 460 228* 1.15 55.91 C, CN
Definite
250 1800 449T 194195.00 √ 35,380 C449T17WB1 2200 460 280* 1.15 55.91 C, CN
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
*F.L. Amps and 460 V
Brake Motors
IEC Motors
DC Motors
Motors
Pump
Applications:
Hydraulic pump passenger, service, freight, and dumbwaiter low rise elevators.
Typically hydraulic elevators travel up to 6 floors at speeds up to 200 fpm.
Washguard
Motors
Features:
• Dual rated nameplates for 80 and 120 starts/hour
• Designed for belt driven pumps
• Wye Start/Delta Run
• Class F insulated
• 40° C ambient
Duty Motors
Agricultural
• F-1 mounting
• Ball bearings with grease fittings and automatic relief
• NEMA® dimensions
• UL recognized component listing and CSA approved
• Constructed for low noise and low vibration
HVAC / Fan
Motors
Three Phase - Drip-Proof - Rigid Base - 80 Starts Per Hour
App. % F.L. 80 Starts Locked
Stock
Special Voltage
15 1800 215T LM28868 √ 1,437 SSD4S10/15T61YEH2 124 230/460 89.5 39/19.6 148/74 S, US
Motors
20 3600 215T LM30093 √ 2,042 SSD2P15/20T6006YEH2 135 200 90.2 53 267 S, US
20 3600 215T LM30094 √ 2,042 SSD2P15/20T61YEH2 138 230/460 90.2 46/23 232/116 S, US
20 1800 254T LM28873 √ 1,958 SSD4G15/20T6006YEH2 203 200 91.0 59 267 S, US
20 1800 254T LM28874 √ 1,958 SSD4G15/20T61YEH2 205 230/460 91.0 51.5/25.7 232/116 S, US
25 3600 254T LM30095 √ 2,590 SSD2P20/25T6006YEH2 128 200 91.0 68 334 S, US
25 3600 254T LM30096 √ 2,590 SSD2P20/25T61YEH2 134 230/460 91.0 59/29.5 290/145 S, US
Purpose Motors
25 1800 256T LM28879 √ 2,475 SSD4G20/25T6006YEH2 233 200 91.0 73.5 368 S, US
Definite
25 1800 256T LM28880 √ 2,475 SSD4G20/25T61YEH2 233 230/460 91.0 64/32 320/160 S, US
30 3600 256T LM30097 √ 3,116 SSD2P25/30T6006YEH2 235 200 91.0 80 419 S, US
30 3600 256T LM30098 √ 3,116 SSD2P25/30T61YEH2 235 230/460 91.0 69/34.5 364/182 S, US
30 1800 284T LM29850 √ 3,270 CCD4G25/30T6006YEH2 300 200 91.7 84 391 C, US
30 1800 284T LM29851 √ 3,270 CCD4G25/30T61YEH2 318 230/460 90.2 73/36.5 340/170 C, US
30 1800 284T LM33046 √ 3,745 CCD4B25/30T61YEH2 320 230/460 94.1 73/36.5 360/180 C, US
Brake Motors
Continued On Next Page
Shaded model numbers are cast iron frame
Note listing on inside back flap
C/A - Check Availability
Specifications are subject to change without notice
IEC Motors
DC Motors
Stock
RPM NEMA Catalog List Wgt. Nom. F.L. Rotor
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage EFF. Amps Amps Notes
Motors
40 3600 284T LM30099 √ 4,013 CCD2P30/40T6006YEH2 320 200 91.7 112 460 C, US
40 3600 284T LM30100 √ 4,013 CCD2P30/40T61YEH2 322 230/460 91.7 97/48.5 400/200 C, US
40 1800 286T LM29852 √ 3,793 CCD4G30/40T6006YEH2 450 200 92.4 112 495 C, US
40 1800 286T LM29853 √ 3,793 CCD4G30/40T61YEH2 600 230/460 92.4 97/48.5 430/215 C, US
40 1800 286T LM33048 C/A 4,342 CCD4B30/40T61YEH2 610 230/460 94.1 96/48 416/208 C, US
50 3600 286T LM30102 C/A 5,126 CCD2P40/50T61YEH2 462 230/460 92.4 118/59 580/290 C, US
Duty Motors
Agricultural
50 1800 324T LM28897 √ 5,751 SD4G40/50T6006YEH2 550 200 92.4 150 630 S, US
50 1800 324T LM28898 √ 5,751 SD4G40/50T61YEH2 552 230/460 92.4 130/65 548/274 S, US
50 1800 324T LM32651 √ 6,587 SD4B40/50T61YEH2 554 230/460 94.5 125/62.5 530/265 S, US
60 1800 326T LM28903 √ 6,388 SD4G50/60T6006YEH2 519 200 92.4 176 794 S, US
60 1800 326T LM28904 C/A 6,388 SD4G50/60T61YEH2 530 230/460 92.4 153/76.5 690/345 S, US
60 1800 326T LM32663 √ 9,740 SF4B50/60T61YEH2 535 230/460 93.6 151/75.5 650/325 S, US, 13
75 1800 364T LM28909 C/A 9,550 SD4G60/75T6006YEH2 693 200 93.6 206 1000 S, US
75 1800 364T LM28910 √ 9,550 SD4S60/75T61YEH2 709 230/460 93.6 179/89.5 870/435 S, US
HVAC / Fan
Motors
100 1800 365T LM28914 C/A 10,084 SD4G75/100T61YEH2 754 230/460 94.1 250/125 1084/542 S, US
260
Definite Purpose Motors
Lincoln Motors™ Hydraulic Elevator Duty Motors
Motors
Pump
Three Phase - Drip-Proof - Rigid Base - 120 Starts Per Hour
App. % F.L. 120 Locked
Stock
RPM NEMA Catalog List Wgt. Nom. Starts F.L. Rotor
Washguard
HP 60 Hz Frame Number Price Model Number (lbs) Voltage EFF. Amps Amps Notes
Motors
10 3600 213T LM30092 C/A 1,564 SSD2P10/15T61YEH2 149 230/460 88.5 23.4/11.7 162/81 S, US
10 1800 215T LM28867 √ 1,437 SSD4G10/15T6006YEH2 128 200 89.5 28.8 170 S, US
10 1800 215T LM28868 √ 1,437 SSD4S10/15T61YEH2 124 230/460 89.5 25/12.5 148/74 S, US
15 3600 215T LM30093 √ 2,042 SSD2P15/20T6006YEH2 135 200 90.2 39 267 S, US
15 3600 215T LM30094 √ 2,042 SSD2P15/20T61YEH2 138 230/460 90.2 34/17 232/116 S, US
15 1800 254T LM28873 √ 1,958 SSD4G15/20T6006YEH2 203 200 91.0 44 267 S, US
Duty Motors
Agricultural
15 1800 254T LM28874 √ 1,958 SSD4G15/20T61YEH2 205 230/460 91.0 38.5/19.2 232/116 S, US
20 3600 254T LM30095 √ 2,590 SSD2P20/25T6006YEH2 128 200 91.0 53 334 S, US
20 3600 254T LM30096 √ 2,590 SSD2P20/25T61YEH2 134 230/460 91.0 46/23.1 290/145 S, US
20 1800 256T LM28879 √ 2,475 SSD4G20/25T6006YEH2 233 200 91.0 60 368 S, US
20 1800 256T LM28880 √ 2,475 SSD4G20/25T61YEH2 233 230/460 91.0 52/26 320/160 S, US
25 3600 256T LM30097 √ 3,116 SSD2P25/30T6006YEH2 235 200 91.0 66.5 419 S, US
25 3600 256T LM30098 √ 3,116 SSD2P25/30T61YEH2 235 230/460 91.0 58.29 364/182 S, US
25 1800 284T LM29850 √ 3,270 CCD4G25/30T6006YEH2 300 200 91.7 70 391 C, US
HVAC / Fan
Motors
25 1800 284T LM29851 √ 3,270 CCD4G25/30T61YEH2 318 230/460 90.2 61/30.5 340/170 C, US
25 1800 284T LM33046 √ 3,745 CCD4B25/30T61YEH2 320 230/460 94.1 62/31 360/180 C, US
30 3600 284T LM30099 √ 4,013 CCD2P30/40T6006YEH2 320 200 91.7 83 460 C, US
30 3600 284T LM30100 √ 4,013 CCD2P30/40T61YEH2 322 230/460 91.7 72.36 400/200 C, US
30 1800 286T LM29852 √ 3,793 CCD4G30/40T6006YEH2 450 200 92.4 83 495 C, US
30 1800 286T LM29853 √ 3,793 CCD4G30/40T61YEH2 600 230/460 92.4 72/36 430/215 C, US
Special Voltage
30 1800 286T LM33048 C/A 4,342 CCD4B30/40T61YEH2 610 230/460 94.1 74/37 416/208 C, US
Motors
40 3600 286T LM30102 C/A 5,126 CCD2P40/50T61YEH2 462 230/460 92.4 94/47 580/290 C, US
40 1800 324T LM28897 √ 5,751 SD4G40/50T6006YEH2 470 200 92.4 122 630 S, US
40 1800 324T LM28898 √ 5,751 SD4G40/50T61YEH2 466 230/460 92.4 106/53 548/274 S, US
40 1800 324T LM32651 √ 6,587 SD4B40/50T61YEH2 466 230/460 94.5 103/51.5 530/265 S, US
50 1800 326T LM28903 √ 6,388 SD4G50/60T6006YEH2 519 200 92.4 150 794 S, US
50 1800 326T LM28904 √ 6,388 SD4G50/60T61YEH2 530 230/460 92.4 130/65 690/345 S, US
Purpose Motors
50 1800 326T LM32663 √ 9,740 SF4B50/60T61YEH2 535 230/460 93.6 131/65 650/325 S, US
60 1800 364T LM28909 C/A 9,550 SD4G60/75T6006YEH2 693 200 93.6 167 1000 S, US
Definite
60 1800 364T LM28910 √ 9,550 SD4S60/75T61YEH2 709 230/460 93.6 145/72.5 870/435 S, US
75 1800 365T LM28914 C/A 10,084 SD4G75/100T61YEH2 754 230/460 94.1 187/93.5 1084/542 S, US
Note listing on inside back flap
Shaded model numbers are cast iron frame Specifications are subject to change without notice
Green items are Premium Efficient
C/A - Check Availability
Brake Motors
IEC Motors
DC Motors
261
Definite Purpose Motors
Lincoln Motors™ VVVF (Variable Voltage-Variable Frequency) Traction Elevator Hoist Motors
Motors
Pump
Applications:
Designed for geared and gearless traction elevators, 100 fpm to 500 fpm operation and
up to 12 or 15 floors.
Features:
Washguard
Motors
Three Phase - Drip-Proof - Rigid Base with Encoder - 80 Starts Per Hour
HVAC / Fan
Motors
7 1/2 1200 4 254T LM28117 C/A 4,415 SD4P7.5T4006ET1 200 40 200 21.9 275% S, US
Motors
7 1/2 900 4 256T LM28118 C/A 4,903 SD4P7.5T31ET1 278 30 230/460 19.6/9.8 275% S, US
7 1/2 900 4 256T LM28119 C/A 4,903 SD4P7.5T3006ET1 278 30 200 22.6 275% S, US
10 1200 6 256T LM28120 √ 5,003 SSD6P10T61ET1 214 60 230/460 29/14.5 250% S, US
10 1200 6 256T LM28121 √ 5,003 SD6P10T6006ET1 214 60 200 33.5 250% S, US
10 1200 4 256T LM28122 C/A 4,903 SD4P10T41ET1 232 40 230/460 25.4/12.7 275% S, US
10 1200 4 256T LM28123 C/A 4,903 SSD4P10T4006ET1 232 40 200 29.2 275% S, US
Purpose Motors
10 900 4 284T LM28124 C/A 5,805 SD4P10T31ET1 280 30 230/460 27/13.5 330% S, US
Definite
10 900 4 284T LM28125 C/A 5,805 SD4P10T3006ET1 280 30 200 31.1 330% S, US
12 1/2 1200 6 284T LM31393 C/A 6,772 SD6P12.5T61ET1 338 60 230/460 42/21 300% S, US
12 1/2 1200 6 284T LM30676 √ 6,772 SD6P12.5T6006YET1 338 60 200 47 300% S, US
12 1/2 900 4 284T LM30677 C/A 6,302 SD4P12.5T31ET1 365 30 230/460 34/17 300% S, US
12 1/2 900 4 284T LM30678 C/A 6,302 SD4P12.5T3006ET1 365 30 200 38.5 300% S, US
15 1800 4 256T LM30679 C/A 5,003 SD4P15T61ET1 233 60 230/460 — — S, US
15 1800 4 256T LM30680 C/A 5,003 SD4P15T6006ET1 233 60 200 — — S, US
Brake Motors
262
Definite Purpose Motors
Lincoln Motors™ VVVF (Variable Voltage-Variable Frequency) Traction Elevator Hoist Motors
Motors
Pump
Three Phase - Drip-Proof - Rigid Base with Encoder - 80 Starts Per Hour
No. App. Rated
Stock
SYN of Catalog List Wgt. Accel.
HP RPM Poles Frame Number Price Model Number (lbs) HZ Voltage F.L. Amps Torque Notes
Washguard
20 1200 6 286T LM28132 C/A 7,918 SD6S20T61YET1 390 60 230/460 61/30.5 275% S, US
Motors
20 1200 6 286T LM28133 C/A 6,988 SD6S20T6006YET1 400 60 200 70 275% S, US
20 1200 4 286T LM28134 C/A 6,799 SD4P20T41ET1 385 40 230/460 52/26 330% S, US
20 1200 4 286T LM28135 C/A 6,799 SD4P20T4006ET1 385 40 200 59.8 330% S, US
20 900 4 324T LM28136 C/A 8,777 SD4P20T31ET1 480 30 230/460 54/27 275% S, US
20 900 4 324T LM28137 C/A 8,777 SD4P20T3006ET1 471 30 200 62 275% S, US
25 1800 4 284T LM30720 C/A 6,012 SD4P25T61ET1 350 60 230/460 64/32 250% S, US
Duty Motors
Agricultural
25 1800 4 284T LM30721 C/A 6,012 SD4P25T62ET1 350 60 200 73.5 250% S, US
25 1200 6 324T LM28138 C/A 9,581 SD6S25T61YET1 505 60 230/460 64/32 250% S, US
25 1200 6 324T LM28139 C/A 9,581 SD6P25T6006ET1 505 60 200 73.5 250% S, US
25 1200 4 324T LM28140 C/A 7,747 SD4P25T41ET1 472 40 230/460 65/32.5 275% S, US
25 1200 4 324T LM28141 C/A 7,747 SD4P25T4006ET1 472 40 200 74.5 275% S, US
25 900 4 326T LM28142 C/A 9,968 SD4P25T31ET1 538 30 230/460 64/32 275% S, US
25 900 4 326T LM28143 C/A 9,968 SD4P25T3006YET1 525 30 200 73.5 275% S, US
30 1800 4 286T LM30722 C/A 6,988 SD4P30T61ET1 400 60 230/460 72/36 250% S, US
HVAC / Fan
Motors
30 1800 4 286T LM30723 C/A 6,988 SD4P30T62ET1 400 60 200 83 250% S, US
30 1200 6 326T LM27976 C/A 11,581 SD6S30T61YET1 535 60 230/460 76/38 225% S, US
30 1200 6 326T LM28144 C/A 10,690 SD6S30T6006YET1 552 60 200 87.4 225% S, US
30 1200 4 326T LM28145 C/A 9,785 SD4P30T41ET1 516 40 230/460 74/37 275% S, US
30 1200 4 326T LM28146 C/A 9,785 SD4P30T4006ET1 516 40 200 85 275% S, US
30 900 4 364T LM28147 C/A 11,975 SD4P30T31ET1 575 30 230/460 74/37 275% S, US
Special Voltage
30 900 4 364T LM28148 C/A 11,975 SD4P30T3006ET1 575 30 200 85 275% S, US
40 1800 4 324T LM30724 C/A 8,003 SD4P40T61ET1 470 60 230/460 98/49 250% S, US
Motors
40 1800 4 324T LM30725 C/A 8,003 SD4P40T62ET1 470 60 200 113 250% S, US
40 1200 6 364T LM28149 √ 13,513 SD6S40T61YET1 755 60 230/460 98/49 250% S, US
40 1200 6 364T LM28150 C/A 13,513 SD6S40T6006YET1 755 60 200 113 250% S, US
40 1200 4 364T LM28151 C/A 11,975 SD4P40T41ET1 715 40 230/460 95/47.5 275% S, US
40 1200 4 364T LM28152 C/A 11,975 SD4P40T4006ET1 715 40 200 109 275% S, US
Purpose Motors
40 900 4 365T LM28153 C/A 13,342 SD4P40T31ET1 783 30 230/460 97/48.5 275% S, US
40 900 4 365T LM28154 C/A 13,342 SD4P40T3006ET1 783 30 200 112 275% S, US
Definite
50 1800 4 326T LM30647 C/A 8,928 SD4P50T61ET1 522 60 230/460 121/60.5 250% S, US
50 1800 4 326T LM30648 C/A 8,928 SD4P50T6006ET1 522 60 200 139 250% S, US
50 1200 6 365T LM28155 C/A 13,881 SD6S50T61YET1 800 60 230/460 129/64.5 275% S, US
50 1200 6 365T LM28156 C/A 13,881 SD6S50T6006YET1 800 60 200 148 275% S, US
50 1200 4 365T LM28157 C/A 13,342 SD4P50T41ET1 765 40 230/460 120/60 275% S, US
50 1200 4 365T LM28158 C/A 13,342 SD4P50T4006ET1 765 40 200 138 275% S, US
Brake Motors
50 900 4 405T LM28159 C/A 15,649 SD4P50T31ET1 964 30 230/460 117/58.5 275% S, US
50 900 4 405T LM28160 C/A 17,733 SD4S50T3006YET1 964 30 200 138 275% S, US
60 1800 4 364T LM30649 C/A 10,992 SD4P60T61ET1 715 60 230/460 140/70 —— S, US
60 1800 4 364T LM30650 C/A 10,992 SD4P60T6006ET1 715 60 200 161 —— S, US
60 1200 6 404T LM28161 C/A 15,699 SD6P60T61YET1 888 60 230/460 167/83.5 250% S, US
60 1200 6 404T LM28162 C/A 15,699 SD6P60T6006YET1 888 60 200 192 250% S, US
263
Definite Purpose Motors
Lincoln Motors™ VVVF (Variable Voltage-Variable Frequency) Traction Elevator Hoist Motors
Motors
Pump
Three Phase - Drip-Proof - C Face Less Base - with Encoder - F1 Conduit Box
80 Starts Per Hour
No. App. Rated
Stock
Washguard
HP RPM Poles Frame Number Price Model Number (lbs) HZ Voltage Amps Torque Notes
7 1/2 1200 6 254TC LM28200 √ 4,635 SD6P7.5TCN61ET1 150 60 230/460 19/9.5 225% S, US
7 1/2 1200 6 254TC LM28201 √ 4,635 SD6P7.5TCN6006ET1 150 60 200 27.6 225% S, US
7 1/2 1200 4 254TC LM30655 C/A 4,547 SD4P7.5TCN41ET1 145 40 230/460 19/9.5 275% S, US
7 1/2 1200 4 254TC LM30663 C/A 4,547 SD4P7.5TCN4006ET1 145 40 200 22 275% S, US
7 1/2 900 4 256TC LM28202 C/A 5,036 SD4P7.5TCN31ET1 225 30 230/460 19.6/9.8 275% S, US
7 1/2 900 4 256TC LM28203 C/A 5,036 SD4P7.5TCN3006ET1 225 30 200 23 275% S, US
Duty Motors
Agricultural
12 1/2 900 4 284TC LM30736 C/A 6,532 SD4P12.5TCN3006ET1 355 30 230/460 34/17 300% S, US
12 1/2 900 4 284TC LM30737 C/A 6,532 SD4P12.5TCN3006ET1 355 30 200 38.5 300% S, US
15 1800 4 256TC LM30748 C/A 4,850 SD4P15TCN61ET1 220 60 230/460 45/22.5 — S, US
15 1800 4 256TC LM30749 C/A 4,850 SD4P15TCN6006ET1 220 60 200 — — S, US
15 1200 6 284TC LM28208 C/A 7,074 SD6P15TCN61ET1 330 60 230/460 49/24.5 300% S, US
15 1200 6 284TC LM28209 C/A 7,074 SD6S15TCN6006YET1 330 60 200 56.5 300% S, US
Special Voltage
15 1200 4 284TC LM30750 C/A 6,036 SD4P15TCN41ET1 355 40 230/460 40/20 330% S, US
Motors
20 1200 4 286TC LM30739 C/A 7,028 SD4P20TCN41ET1 396 40 230/460 52/26 330% S, US
20 1200 4 286TC LM30740 C/A 7,028 SD4P20TCN6006ET1 396 40 200 60 330% S, US
20 900 4 324TC LM28214 C/A 7,898 SD4P20TCN31ET1 480 30 230/460 54/27 275% S, US
20 900 4 324TC LM28215 C/A 9,209 SD4S20TCN3006YET1 480 30 200 62 275% S, US
25 1800 4 284TC LM31607 C/A 7,175 SD4P25TCN61ET1 355 60 230/460 64/32 250% S, US
25 1800 4 284TC LM30760 C/A 6,332 SD4P25TCN6006ET1 355 60 200 75 250% S, US
25 1200 6 324TC LM28216 C/A 10,311 SD6S25TC61YET1 499 60 230/460 64/32 250% S, US
Brake Motors
25 1200 6 324TC LM28217 C/A 9,100 SD6P25TCN6006ET1 499 60 200 73.5 250% S, US
25 1200 4 324TC LM30754 C/A 8,128 SD4P25TCN41ET1 480 40 230/460 65/32.5 275% S, US
25 1200 4 324TC LM30755 C/A 8,128 SD4P25TCN4006ET1 480 40 200 74.8 275% S, US
25 900 4 326TC LM28218 C/A 9,782 SD4P25TCN31ET1 533 30 230/460 64/32 275% S, US
25 900 4 326TC LM28219 C/A 11,083 SD4P25TCN3006ET1 533 30 200 73.5 275% S, US
264
Definite Purpose Motors
Lincoln Motors™ VVVF (Variable Voltage-Variable Frequency) Traction Elevator Hoist Motors
Motors
Pump
Three Phase - Drip-Proof - C Face Less Base - with Encoder - F1 Conduit Box
80 Starts Per Hour
No. App. Rated
Washguard
Stock
SYN of TC Catalog List Wgt. F.L. Accel.
Motors
HP RPM Poles Frame Number Price Model Number (lbs) HZ Voltage Amps Torque Notes
30 1800 4 286TC LM30702 C/A 8,459 SD4S30TCN61YET1 397 60 230/460 72/36 250% S, US
30 1800 4 286TC LM30762 C/A 8,459 SD4P30TCN6006ET1 397 60 200 83 250% S, US
30 1200 6 326TC LM27971 C/A 11,838 SD6S30TCN61YET1 537 60 230/460 76/38 225% S, US
30 1200 6 326TC LM28220 C/A 11,838 SD6S30TCN6006YET1 557 60 200 87.5 225% S, US
30 1200 4 326TC LM30756 C/A 9,324 SD4P30TCN41ET1 532 40 230/460 74/37 275% S, US
Duty Motors
30 1200 4 326TC LM30757 C/A 9,324 SD4P30TCN4006ET1 532 40 200 85 275% S, US
Agricultural
30 900 4 364TC LM28221 C/A 13,106 SD4P30TCN31ET1 720 30 230/460 74/37 275% S, US
30 900 4 364TC LM28222 C/A 13,106 SD4P30TCN3006ET1 720 30 200 85 275% S, US
40 1800 4 324TC LM30763 C/A 9,828 SD4P40TCN61ET1 480 60 230/460 100/50 250% S, US
40 1800 4 324TC LM30764 C/A 9,828 SD4P40TCN6006ET1 480 60 200 113 250% S, US
40 1200 6 364TC LM28223 √ 14,372 SD6P40TCN61ET1 724 60 230/460 98/49 250% S, US
40 1200 6 364TC LM28224 C/A 14,372 SD6P40TCN6006ET1 724 60 200 113 250% S, US
HVAC / Fan
Motors
Specifications are subject to change without notice
Applications:
Special Voltage
Encoder pigtail kits are used to extend the length of the existing encoder leads.
Motors
Stock
Catalog List
Number Description Price
LM30561 √ 30 ft. encoder cable kit 1,030
Purpose Motors
LM31752 √ 40 ft. encoder cable kit 1,030
Definite
LM30881 √ 50 ft. encoder cable kit 1,218
Specifications are subject to change without notice
Brake Motors
IEC Motors
DC Motors
265
Definite Purpose Motors
Lincoln Motors™ Submersible Hydraulic Elevator Pump Motors
Motors
Pump
Application Notes:
These motors are designed to meet the demands in the hydraulic
elevator pump industry. Our submersible hydraulic pump elevator
motors are ready to be placed in elevator systems for applications
Washguard
Motors
Features:
• Intermittent duty
• Suitable for Wye-Delta starters
Duty Motors
Agricultural
ø7.125 [?181.0]
ø6.250 [?158.8]
2.28 [58.0]
13.35 [339.0]
ø4.376 4.375 [111.1 111.1]
1/4-20
.50 DEEP
8 HOLES
266
Definite Purpose Motors
Lincoln Motors™ Submersible Hydraulic Elevator Pump Motors
Motors
Pump
Washguard
Motors
Three Phase - Open Submersible - Rigid Base
App. Locked
Stock
RPM Catalog List Wgt. KVA F.L. Rotor
HP 60 HZ Frame Number Price Model Number (lbs) Voltage Code Amps Amps F.L. EFF. Notes
15 3600 160Z LM29656 √ 1,454 SD2S15Z6006YEH3 110 200 H 53 268 72.2 S, CN
Duty Motors
Agricultural
15 3600 160Z LM29657 √ 1,454 SD2S15Z61YEH3 110 208-230/460 H 46/23 250/125 72.2 S, CN
15 3600 160Z LM29658 √ 1,454 SD2S15Z65YEH3 110 575 H 18,4 100 72.2 S, CN
20 3600 160Z LM29659 √ 1,489 SD2S20Z6006YEH3 112 200 G 61 363 76.4 S, CN
20 3600 160Z LM29660 √ 1,489 SD2S20Z61YEH3 112 208-230/460 G 56/28 316/158 76.4 S, CN
20 3600 160Z LM29661 √ 1,489 SD2S20Z65YEH3 112 575 G 22,4 126 76.4 S, CN
25 3600 160Z LM29662 √ 1,623 SD2S25Z6006YEH3 135 200 G 77 416 79.0 S, CN
25 3600 160Z LM29663 √ 1,623 SD2S25Z61YEH3 115 208-230/460 G 63/31.5 364/182 79.0 S, CN
25 3600 160Z LM29664 √ 1,623 SD2S25Z65YEH3 115 575 G 25.2 146 79.0 S, CN
HVAC / Fan
Motors
30 3600 160Z LM29665 √ 1,810 SD2S30Z6006YEH3 119 200 G 92 499 79.9 S, CN
30 3600 160Z LM29666 √ 1,810 SD2S30Z61YEH3 129 208-230/460 G 80/40 434/217 79.9 S, CN
30 3600 160Z LM29667 √ 1,810 SD2S30Z65YEH3 119 575 G 32 174 79.9 S, CN
40 3600 160Z LM29668 √ 2,318 SD2S40Z6006YEH3 132 200 G 115 667 84.0 S, CN
40 3600 160Z LM29669 √ 2,318 SD2S40Z61YEH3 132 208-230/460 G 100/50 580/290 84.0 S, CN
40 3600 160Z LM29670 √ 2,318 SD2S40Z65YEH3 132 575 G 40 232 84.0 S, CN
Special Voltage
50 3600 160Z LM29671 √ 2,644 SD2S50Z6006YEH3 143 200 H 140 550 84.0 S, CN
50 3600 160Z LM29672 √ 2,644 SD2S50Z61YEH3 143 208-230/460 H 122/61 478/239 84.0 S, CN
Motors
50 3600 160Z LM29673 √ 2,644 SD2S50Z65YEH3 171 575 H 49 191 84.0 S, CN
Conversion Kit
Purpose Motors
Definite
L32 Kit Information:
Used to adapt the Lincoln Motors Submersible Elevator motors to some IMO and Allweiler Pumps.
Kit includes necessary through-bolts to mount this kit to these motors
Brake Motors
Catalog Desc. App. Wgt. List
Number Sym (lbs) Price
LM31777 A 12 717
Application Notes:
Unit and baggage handling, conveyors, packaging equipment machine tools,
elevators and door openers where a conduit box at 12:00 position is needed
due to mounting size restrictions.
Features:
Washguard
Motors
Stock
Duty Motors
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Factor (Inches) Notes
1/2 1800 56C 117701.00 √ 571 C6C17FK92 25 115/208-230 4.4 1.15 12.48 S, US
3/4 1800 56C 117702.00 √ 620 C6C17FK94 29 115/208-230 5.4 1.15 12.48 S, US
1 1800 56C 117703.00 √ 673 C6C17FK93 32 115/208-230 6.4 1.15 12.48 S, US
Specifications are subject to change without notice Note listing on inside back flap
App. F. L. “C”
Stock
Specifications are subject to change without notice Note listing on inside back flap
Motors
1/2 1800 56C 117707.00 √ 577 C6T17FK99 23 208-230/460 2.0 74.0 1.15 12.48 S, US
Definite
3/4 1800 56C 117708.00 √ 611 C6T17FK100 26 208-230/460 2.8 77.0 1.15 12.48 S, US
1 1800 56C 119553.00 √ 828 C6T17FK114 36 230/460 3.4 85.5 1.15 12.81 S, US
1 1800 143TC 121982.00 √ 876 C143T17FK23 40 230/460 3.4 85.5 1.15 12.92 S, US
1 1/2 1800 56C 117710.00 D 653 C6T17FK102 33 230/460 5.0 78.5 1.15 12.48 S, US
1 1/2 1800 56C 119554.00 √ 900 C6T17FK115 47 230/460 5.6 86.5 1.15 13.31 S, US
1 1/2 1800 143TC 121983.00 √ 927 C143T17FK24 41 230/460 5.6 86.5 1.15 13.42 S, US
2 1800 145TC 121984.00 √ 1,109 C145T17FK65 48 230/460 5.8 86.5 1.15 13.92 S, US
Brake Motors
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
HP 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/2 1800 56C 117711.00 √ 518 C6T17FC226 20 208-230/460 2.0 74.0 1.15 10.48 S, US
3/4 1800 56C 117712.00 √ 553 C6T17FC227 24 208-230/460 2.8 77.0 1.15 10.48 S, US
1 1800 56C 119555.00 √ 807 C6T17FC259 34 230/460 3.4 85.5 1.15 12.81 S, US
1 1800 143TC 122234.00 √ 856 C143T17FC45 37 230/460 3.4 85.5 1.15 13.25 S, US
1 1/2 3600 56C 117714.00 D 647 C6T34FC107 29 208-230/460 4.2 78.5 1.15 11.48 S, US
1 1/2 3600 56C 119556.00 √ 883 C6T34FC139 29 230/460 4.8 86.5 1.15 13.31 S, US
1 1/2 1800 143TC 122235.00 √ 905 C145T17FC138 45 230/460 4.8 86.5 1.15 13.42 S, US
DC Motors
2 1800 145TC 122258.00 √ 1,003 C145T17FC136 47 208-230/460 6.5 86.5 1.15 13.92 S, US
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
268
Definite Purpose Motors
Export Only Motors - Three Phase - EPAct and Standard Efficiency
Motors
Pump
Specifications:
These motors comply to the EPAct mandates of 1997, but do not comply with EISA mandates of Dec. 2010.
They are not intended for use in the USA, and can be used on machinery that is exported out of the USA
Washguard
Motors
App.
Stock
RPM 60 NEMA Wgt. % F.L.
HP Hz Frame Catalog Number List Price (lbs) Voltage EFF. Notes
1 1725 143T EXG120014.00 C/A 621 31 230/460 82.5 S, US
1 1725 143T EXG151696.60 C/A 665 49 230/460 84.0 C, CN
1 1/2 3450 145T EXG120086.00 C/A 685 45 230/460 82.5 S, US
Duty Motors
1 1/2 3450 143T EXG151698.60 C/A 735 45 230/460 82.5 C, CN
Agricultural
1 1/2 1725 145T EXG120015.00 C/A 627 36 230/460 84.0 S, US
1 1/2 1725 145T EXG151702.60 C/A 673 53 230/460 85.5 C, CN
2 3450 145T EXG120088.00 C/A 787 45 230/460 84.0 S, US
2 3450 145T EXG151704.60 C/A 844 49 230/460 84.0 C, CN
2 1725 145T EXG120016.00 C/A 720 46 230/460 84.0 S, US
2 1725 145T EXG151703.60 C/A 714 56 230/460 85.5 C, CN
3 3450 145T EXG120185.00 C/A 901 42 230/460 85.5 S, US
HVAC / Fan
3 3450 182T EXG130099.00 C/A 964 60 230/460 85.5 S, MX
Motors
3 3510 182T EXG151563.60 C/A 1,036 93 230/460 85.5 C, CN
3 1740 182T EXG130008.00 C/A 785 68 230/460 87.5 S, MX
3 1750 182T EXG151320.60 C/A 1,012 94 230/460 87.5 C, CN
5 3500 184T EXG150299.60 C/A 1,046 100 230/460 87.5 C, CN
5 3450 184T EXG130101.00 C/A 1,111 73 230/460 87.5 S, MX
5 1740 184T EXG130027.00 C/A 905 80 230/460 87.5 S, MX
Special Voltage
5 1750 184T EXG151322.60 C/A 1,104 101 230/460 87.5 C, CN
Motors
7 1/2 3450 184T EXG131082.00 C/A 1,237 91 230/460 88.5 S, MX
7 1/2 3450 213T EXG130103.00 C/A 1,271 101 230/460 88.5 S, MX
7 1/2 3450 213T EXG150158.60 C/A 1,383 150 230/460 88.5 C, CN
7 1/2 1740 213T EXG140578.00 C/A 1,210 144 230/460 89.5 S, MX
7 1/2 1750 213T EXG150157.60 C/A 1,246 153 230/460 89.5 C, CN
Purpose Motors
10 3510 215T EXG140686.00 C/A 1,628 126 230/460 89.5 S, MX
10 3510 215T EXG150159.60 C/A 1,652 167 230/460 89.5 C, CN
Definite
10 1740 215T EXG140489.00 C/A 1,312 167 230/460 89.5 S, MX
10 1750 215T EXG150140.60 C/A 1,403 176 230/460 89.5 C, CN
15 3510 215T EXG140687.00 C/A 2,042 140 230/460 90.2 S, MX
15 3510 215T EXG151317.60 C/A 2,145 168 230/460 90.2 C, CN
15 3525 254T EXG150062.60 C/A 2,211 260 230/460 90.2 C, CN
15 1770 254T EXG150066.60 C/A 2,212 284 230/460 91.0 C, CN
Brake Motors
20 3525 256T EXG150033.60 C/A 3,008 296 230/460 90.2 C, CN
20 1750 256T EXG150007.60 C/A 2,801 321 230/460 91.0 C, CN
25 3525 256T EXG151318.60 C/A 3,443 307 230/460 91.0 C, CN
25 3550 284TS EXG150035.60 C/A 3,530 349 230/460 91.0 C, CN
25 1770 284T EXG150011.60 C/A 3,204 370 230/460 92.4 C, CN
30 1770 286T EXG150015.60 C/A 3,896 428 230/460 92.4 C, CN
40 1780 324T EXG150019.60 C/A 5,029 528 230/460 93.0 C, CN
50 1780 326T EXG150023.60 C/A 6,200 561 230/460 93.0 C, CN
IEC Motors
269
Definite Purpose Motors
Export Only Motors - Three Phase - EPAct and Standard Efficiency
Motors
Pump
Stock
RPM 60 NEMA Wgt. % F.L.
HP Hz Frame Catalog Number List Price (lbs) Voltage EFF. Notes
Washguard
Stock
270
CUSTOMER CARE—BUILT ON CUSTOMER INPUT.
Motors
Pump
Our customer care process revolves
around one thing—listening—before,
during and after your purchase. Regal
sales representatives are ready to assist
you 24/7 with product, technical and
service support needs.
Washguard
Motors
Duty Motors
Agricultural
HVAC / Fan
Motors
Special Voltage
TRUST REGAL® DESIGN AND MANUFACTURING
Motors
EXPERIENCE TO DELIVER
THE PERFECT SOLUTION
Purpose Motors
FOR YOUR APPLICATION.
Definite
MORE THAN 100 YEARS OF BROAD STOCK PRODUCT MODULAR MANUFACTURING ACCESSORIES ENABLE
LARGE MOTOR EXPERTISE. PORTFOLIO ENSURES RAPID DELIVERS APPLICATION CUSTOMIZED SOLUTIONS.
For over a century, dedicated RESPONSE. SPECIFIC PRODUCTS FASTER. An extensive range
Brake Motors
Regal specialists have Regal carries a broad range Our modular manufacturing of specialized motor
provided large motor of stock products across design approach enables the accessories helps deliver
solutions for countless an extensive network of configuration of products in flexible, application-specific
industries and applications. distribution centers to help compressed time frames. solutions. From overload
This expertise ensures you deliver the right product at Get the product that meets protection, voltage surge
receive the best product— the right time.Trust Regal to your specifications without protection to vibration
stock or custom—for your deliver solutions that help compromising features or protection, your trusted
unique installation.Tap our you stay up and running. functionality. Regal representative will
IEC Motors
271
Motors Brakemotors
Pump
Washguard
Motors
Features:
Duty Motors
Agricultural
Applications:
For use where quick response stopping and holding is required in the application, which may
include conveyors, hoists, packaging equipment etc.
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
272
Brakemotors
Single Phase & Three Phase
Motors
Pump
Single Phase - TENV/TEFC - C Face With Base
SYN Brake App. F. L. “C”
Stock
RPM NEMA Rating Catalog List Wgt. Amps @ Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage 230V Factor (Inches) Notes
1/3 1800 56C 3 114165.00 √ 1,233 C6C17NK19 31 115/208-230 2.9 1.15 14.06 S, US, 12
Washguard
1/2 1800 56C 3 111950.00 √ 1,331 C6C17FK20 32 115/208-230 4.4 1.00 15.73 S, US, 13
Motors
3/4 1800 56C 6 114167.00 √ 1,751 C6C17FK50 40 115/208-230 5.4 1.15 16.23 S, US, 13
1 1800 56C 6 111951.00 √ 1,854 C6K17FK21 40 115/208-230 5.3 1.00 16.73 S, US, 13, 53
1 1⁄2 1800 145TC 10 121815.00 √ 1,963 C145K17FK17 40 115/208-230 8.6 1.00 18.23 S, US, 13, 53
2 1800 145TC 10 121816.00 √ 2,011 C145K17FK16 55 115/208-230 9.2 1.00 19.23 S, US, 13, 53
Duty Motors
Agricultural
Three Phase - Drip-Proof - Rigid Base
SYN Brake App. F. L. “C”
Stock
RPM NEMA Rating Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage 230V EFF. Factor (Inches) Notes
1/2 1800 56 3 114162.00 C/A 1,199 C6T17DB46 31 208-230/460 2.0 74.0 1.25 13.56 S, US
HVAC / Fan
3/4 1800 56 6 114163.00 C/A 1,400 C6T17DB47 32 208-230/460 2.8 77.0 1.25 14.06 S, US
Motors
1 1800 56 6 114164.00 C/A 1,524 C6T17DB48 35 208-230/460 4.2 78.5 1.15 14.06 S, US
1 1⁄2 1800 145T 10 122237.00 C/A 1,870 C145T17DB84 44 230/460 4.8 86.5 1.15 16.50 S, US
2 1800 145T 10 122238.00 √ 2,095 C145T17DB82 54 208-230/460 5.8 86.5 1.15 17.00 S, US
3 1800 182T 15 132468.00 C/A 2,588 C182T17DB64 69 230/460 8.0 89.5 1.15 16.89 S, MX
5 1800 184TC 25 132469.00 C/A 3,253 C184T17DB86 101 230/460 12.6 89.5 1.15 17.89 S, MX
7 1/2 1800 213T 35 ♦ 140611.00 √ 3,957 C213T17DB17 137 230/460 20.8 91.0 1.15 24.50 S, MX
Special Voltage
10 1800 215T 50 ♦ 140635.00 √ 5,002 C215T17DB35 145 208-230/460 26.8 91.7 1.15 25.50 S, MX
Motors
Note: ♦ - 35 and 50 Ft-lb brakes - horizontal mounting only Note listing on inside back flap
All 180 and 210 frame rolled steel motors have Class F insulation Specifications are subject to change without notice
Green items are Premium Efficient
C/A - Check availability
Purpose Motors
Definite
Three Phase - Drip-Proof - C Face Less Base
SYN Brake App. F. L. “C”
Stock
RPM NEMA Rating Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage 230V EFF. Factor (Inches) Notes
Brake Motors
1/2 1800 56C 3 114156.00 √ 1,233 C6T17DC53 31 208-230/460 2.0 74.0 1.25 11.84 S, US
3/4 1800 56C 6 114157.00 √ 1,437 C6T17DC55 32 208-230/460 2.8 77.0 1.25 11.84 S, US
1 1800 56C 6 114166.00 √ 1,552 C6T17DC54 40 208-230/460 4.2 78.5 1.15 13.56 S, US
1 1800 143TC 6 121678.00 D 1,552 C143T17DC14 42 230/460 4.2 78.5 1.15 13.98 S, US
1 1800 143TC 6 122239.00 C/A 1,648 C143T17DC19 45 230/460 3.2 85.5 1.15 13.98 S, US
1 1⁄2 1800 145TC 10 122240.00 C/A 1,924 C145T17DC49 49 230/460 4.8 86.5 1.15 13.98 S, US
1 1⁄2 1800 56C 10 116766.00 √ 1,806 C6T17DC83 43 230/460 5.6 78.5 1.15 13.98 S, US
2 1800 145TC 10 122241.00 √ 2,168 C145T17DC50 53 230/460 5.8 86.5 1.15 13.98 S, US
IEC Motors
3 1800 182TC 15 132470.00 √ 2,687 C182T17DC22 69 230/460 8.0 89.5 1.15 11.24 S, MX
5 1800 184TC 25 132471.00 √ 3,334 C184T17DC30 100 230/460 12.6 89.5 1.15 11.24 S, MX
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
C/A - Check availability
DC Motors
273
Brakemotors
Three Phase
Motors
Pump
Stock
RPM NEMA Rating Catalog List Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage 230V EFF. Factor (Inches) Notes
1/2 1800 56C 3 111326.00 C/A 1,242 C6T17DK7 31 208-230/460 2.0 74.0 1.25 13.56 S, US
3/4 1800 56C 6 111327.00 C/A 1,456 C6T17DK8 37 208-230/460 2.8 77.0 1.25 14.06 S, US
1 1800 56C 6 111328.00 √ 1,573 C6T17DK9 42 208-230/460 4.2 78.5 1.15 14.06 S, US
Duty Motors
1 1⁄2 1800 145TC 10 122242.00 C/A 1,898 C145T17DK30 53 230/460 4.8 86.5 1.15 17.00 S, US
Agricultural
2 1800 145TC 10 122243.00 C/A 2,137 C145T17DK28 53 208-230/460 5.8 86.5 1.15 17.50 S, US
3 1800 182TC 15 132472.00 C/A 2,973 C184T17DK45 87 230/460 8.0 89.5 1.15 13.39 S, MX
5 1800 184TC 25 132473.00 C/A 3,610 C184T17DK32 100 230/460 12.6 89.5 1.15 14.39 S, MX
7 1/2 1800 213TC 35 140610.00 C/A 4,180 C213T17DK17 118 230/460 20.0 91.0 1.15 26.89 S, MX
10 1800 215TC 50 140638.00 C/A 5,228 C215T17DK16 129 230/460 26.2 91.7 1.15 26.89 S, MX
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
RPM NEMA Rating Catalog List Wgt. Amps @ % F.L. Service Dim.
Purpose Motors
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage 230V EFF. Factor (Inches) Notes
1/3 1800 56 3 114151.00 C/A 1,171 C6T17NB51 31 208-230/460 1.3 72.0 1.15 13.56 S, US, 12
Definite
1/2 1800 56 3 114150.00 √ 1,275 C6T17NB50 32 208-230/460 1.8 78.5 1.15 14.06 S, US, 12
1/2 1200 56 6 114149.00 C/A 1,760 C6T11FB16 36 208-230/460 2.4 70.0 1.15 15.73 S, US
3/4 1800 56 6 114147.00 √ 1,493 C6T17FB79 37 208-230/460 2.8 77.0 1.15 15.23 S, US
1 1800 56 6 119561.00 C/A 1,780 C6T17FB194 50 230/460 3.2 85.5 1.15 17.23 S, US
1 1800 143T 6 122244.00 √ 1,784 C143T17FB34 45 208-230/460 3.2 85.5 1.15 17.66 S, US
1 1200 145T 10 122245.00 √ 2,512 C145T11FB22 55 230/460 3.8 82.5 1.15 18.16 S, US
Brake Motors
1 1/2 1800 56 10 119562.00 √ 1,997 C6T17FB196 50 230/460 4.8 86.5 1.15 17.73 S, US
1 1/2 1800 145T 10 122246.00 √ 2,002 C145T17FB104 51 208-230/460 4.8 86.5 1.15 18.16 S, US
2 1800 145 10 122247.00 √ 2,052 C145T17FB103 58 208-230/460 5.8 86.5 1.15 18.66 S, US
2 1200 184T 15 132474.00 √ 3,402 C184T11FB31 75 230/460 6.4 88.5 1.15 15.82 S, MX
3 1800 182T 15 132475.00 √ 2,804 C182T17FB59 85 230/460 7.8 89.5 1.15 14.82 S, MX
3 1200 213T 35 140601.00 √ 5,088 C213T11FB6 185 230/460 9.0 89.5 1.15 25.12 S, MX
5 1800 184T 25 132476.00 √ 3,467 C184T17FB74 105 230/460 12.6 89.5 1.15 15.82 S, MX
7 1/2 1800 213T 35 140603.00 √ 4,383 C213T17FB24 195 230/460 21.6 91.7 1.15 27.50 S, MX
IEC Motors
10 1800 215T 50 140636.00 √ 5,014 C215T17FB33 259 230/460 26.8 91.7 1.15 29.00 S, MX
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
C/A - Check availability
DC Motors
274
Brakemotors
Three Phase
Motors
Pump
Three Phase - TEFC - C Face With Base
Washguard
Motors
SYN Brake App. F. L. “C”
Stock
RPM NEMA Rating Catalog List Model Wgt. Amps @ % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Number (lbs) Voltage 230V EFF. Factor (Inches) Notes
1/3 1800 56C 3 110669.00 √ 1,177 C6T17NK1 30 208-230/460 1.3 72.0 1.15 13.56 S, US, 12
1/2 1800 56C 3 110670.00 √ 1,322 C6T17NK2 34 208-230/460 1.8 78.5 1.15 14.06 S, US, 12
1/2 1800 56C 6 114154.00 √ 1,322 C6T17FK49 35 208-230/460 2.0 74.0 1.15 15.31 S, US
Duty Motors
1/2 1200 56C 6 114152.00 √ 1,901 C6T11FK5 45 208-230/460 2.4 70.0 1.15 15.81 S, US
Agricultural
3/4 1800 56C 6 110671.00 √ 1,546 C6T17NK3 35 208-230/460 2.5 80.0 1.15 14.56 S, US, 12
3/4 1800 56C 6 114155.00 √ 1,546 C6T17FK48 46 208-230/460 2.8 77.0 1.00 15.31 S, US
1 1800 56C 6 119563.00 √ 1,890 C6T17FK105 46 208-230/460 3.2 85.5 1.15 17.31 S, US
1 1800 143TC 6 122248.00 √ 1,900 C143T17FK30 47 230/460 3.2 85.5 1.15 17.66 S, US
1 1/2 1800 145TC 10 122249.00 √ 2,089 C145T17FK76 53 230/460 4.8 86.5 1.15 18.16 S, US
2 1800 145TC 10 122250.00 √ 2,160 C145T17FK75 61 208-230/460 5.8 86.5 1.15 18.66 S, US
3 1800 182TC 15 132477.00 √ 2,933 C182T17FK21 82 230/460 7.8 89.5 1.15 15.82 S, MX
HVAC / Fan
Motors
5 1800 184TC 25 132478.00 √ 3,651 C184T17FK38 118 230/460 12.6 89.5 1.15 16.32 S, MX
7 1/2 1800 213TC 35 140605.00 √ 4,679 C213T17FK46 167 230/460 21.6 91.7 1.15 28.00 S, MX
10 1800 215TC 50 140639.00 √ 5,916 C215T17FK47 177 230/460 26.8 91.7 1.15 29.00 S, MX
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Special Voltage
Motors
Purpose Motors
Three Phase - TEFC - C Face Less Base
Definite
SYN Brake App. F. L. “C”
Stock
RPM NEMA Rating Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage @ 230V EFF. Factor (Inches) Notes
1/3 1800 56C 3 114158.00 √ 1,195 C6T17NC194 29 208-230/460 1.3 72.0 1.15 13.56 S, US, 12
1/2 1800 56C 3 114159.00 √ 1,300 C6T17FC111 33 208-230/460 2.0 74.0 1.15 15.31 S, US
3/4 1800 56C 6 114160.00 √ 1,526 C6T17FC112 34 208-230/460 2.8 77.0 1.15 15.31 S, US
1 1800 56C 6 119564.00 √ 1,835 C6T17FC249 45 208-230/460 3.2 85.5 1.15 17.31 S, US
Brake Motors
1 1800 143TC 6 122251.00 √ 1,846 C143T17FC42 50 208-230/460 3.2 85.5 1.15 17.73 S, US
1 1/2 1800 56C 10 119565.00 √ 2,060 C6T17FC250 52 208-230/460 4.8 86.5 1.15 17.81 S, US
1 1/2 1800 145TC 10 122252.00 √ 2,075 C145T17FC127 51 208-230/460 4.8 86.5 1.15 18.66 S, US
2 1800 145TC 10 122253.00 √ 2,132 C145T17FC126 53 208-230/460 5.8 86.5 1.15 18.73 S, US
3 1800 182TC 15 132479.00 √ 2,888 C182T17FC44 72 230/460 7.8 89.5 1.15 19.98 S, MX
5 1800 184TC 25 132480.00 √ 3,636 C184T17FC55 108 230/460 12.6 89.5 1.15 20.98 S, MX
7 1⁄2 1800 213TC 35 141308.00 √ 4,639 C213T17FC43 165 230/460 21.4 91.7 1.15 29.00 S, MX
IEC Motors
10 1800 215TC 50 141309.00 √ 5,876 C215T17FC11 175 230/460 26.8 91.7 1.15 29.00 S, MX
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
DC Motors
275
Washguard® Brakemotors
White Epoxy Painted
Motors
Pump
Stock
RPM NEMA Rating Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage @ 230V EFF. Factor (Inches) Notes
1/3 1800 56C 3 116466.00 C/A 1,636 C6T17VK28 40 208-230/460 1.3 72.0 1.15 14.00 S, US, 12
1/2 1800 56C 3 116467.00 √ 1,669 C6T17VK30 42 208-230/460 1.8 78.5 1.15 14.50 S, US, 12
3/4 1800 56C 6 116468.00 √ 1,979 C6T17VK29 44 208-230/460 2.5 80.0 1.15 15.00 S, US, 12
1 1800 56HC 6 119486.00 √ 2,148 C6T17WK47 53 208-230/460 2.8 85.5 1.15 17.00 S, US, 13
Duty Motors
1 1800 143TC 6 122193.00 √ 2,168 C143T17WK14 53 208-230/460 2.8 85.5 1.15 17.02 S, US, 13
Agricultural
1 1/2 1800 145TC 10 122195.00 √ 2,957 C145T17WK55 55 208-230/460 4.8 86.5 1.15 18.50 S, US, 13
2 1800 145TC 10 122197.00 √ 3,046 C145T17WK56 67 208-230/460 5.8 86.5 1.15 19.00 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
C/A - Check availability Specifications are subject to change without notice
Note 12 - TENV
Note 13 - TEFC
HVAC / Fan
Motors
RPM NEMA Rating Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage @ 230V EFF. Factor (Inches) Notes
1/3 1800 56C 3 116462.00 √ 1,579 C6T17VC43 39 208-230/460 1.3 72.0 1.15 14.00 S, US, 12
Special Voltage
1/2 1800 56C 3 116463.00 √ 1,618 C6T17VC42 41 208-230/460 1.8 78.5 1.15 14.50 S, US, 12
Motors
3/4 1800 56C 6 116464.00 √ 1,925 C6T17VC44 43 208-230/460 2.5 80.0 1.15 15.00 S, US, 12
1 1800 56C 6 119485.00 √ 2,123 C6T17WC54 50 208-230/460 2.8 85.5 1.15 17.00 S, US, 13
1 1800 143TC 6 122192.00 √ 2,137 C143T17VC9 52 208-230/460 2.8 85.5 1.15 17.21 S, US, 13
1 1⁄2 1800 145TC 10 122194.00 √ 2,920 C145T17WC44 55 208-230/460 4.8 86.5 1.15 18.50 S, US, 13
2 1800 145TC 10 122196.00 √ 2,995 C145T17WC45 65 208-230/460 5.8 86.5 1.15 19.00 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
Purpose Motors
RPM NEMA Rating Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage @ 230V EFF. Factor (Inches) Notes
1/2 1800 56C 3 116483.00 C/A 6,172 CZ6T17VK31 59 208-230/460 1.6 78.5 1.15 16.51 S, US, 12
1 1800 56C 6 119785.00 √ 6,950 CZ6T17VK61 73 208-230/460 2.8 85.5 1.15 18.01 S, US, 13
IEC Motors
Green items are Premium Efficient Note listing on inside back flap
C/A - Check availability Specifications are subject to change without notice
Note 12 - TENV
Note 13 - TEFC
DC Motors
276
Brakemotors
High Cycle Brakemotors
Motors
Pump
Applications:
For use in applications that require frequent starting and stopping such
as conveyors as well as unit and baggage handling equipment.
Washguard
Motors
Features:
• All cast iron construction
• High cycle brakes
• Manual release lever on brakes
• UL and CSA recognized construction
• 30 starts and stops per hour
Duty Motors
Agricultural
Three Phase - TENV - C Face Less Base
SYN Brake App. F. L. “C”
Stock
RPM NEMA Rating Catalog List Wgt. Amps % F.L. Service Dim.
HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage @ 230V EFF. Factor (Inches) Notes
HVAC / Fan
1/2 1800 56C 6 117698.00 √ 1,524 C6T17NC332 60 230 1.6 82.5 1.00 15.10 C, US
Motors
3/4 1800 56C 6 117699.00 √ 1,760 C6T17NC333 65 230 2.2 85.5 1.00 16.10 C, US
1 1800 56C 6 119566.00 √ 2,159 C6T17NC343 82 230 3.0 85.5 1.15 16.10 C, US
1.5 1800 143TC 12 121979.00 D 2,351 C145T17NC29 90 230 4.4 84.0 1.25 16.16 C, US
1.5 1800 143TC 12 122254.00 √ 2,357 C145T17NC33 93 230 4.6 86.5 1.15 16.16 C, US
2 1800 145TC 12 122255.00 √ 2,483 C145T17NC31 98 230 6.0 86.5 1.15 16.16 C, US
Green items are Premium Efficient Note listing on inside back flap
Special Voltage
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
Motors
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
277
Motors Brakemotors
Pump
Washguard
Motors
• Kit of components converts 56 through 256T frame stock TEFC motors to fail-safe brakemotors.
• Kit mounts on fan end of motor. Kits for 56-184T steel frame motors include totally enclosed Stearns®*
AC brake, replacement cast fan cover, shaft extension, fan and hardware. Kits for 213T-256T cast iron
Duty Motors
Agricultural
frame motors do not include brake, but are designed for Stearns 87,000 series brake.
• Two 1/2” NPT holes with 18” leads are provided for connections. The brake kit adds 5-1/8” to the overall
length of 56 and 143/145T frame, and 5-7/8” to the overall length of 182/184T frame.
Brakekits
HVAC / Fan
Rating to NEMA Max. HP 115/230 V List 208-230/460V List 575V List App. Wt.
(ft-lbs) Frame @1725 RPM Brake Coil Voltage Price Brake Coil Voltage Price Brake Coil Voltage Price (lbs.)
3 48/S56 1 — 175615.00♠ 859 — — 10
3 56/143-5T 1 175762.00◊ 859 175765.00◊ 859 175768.00◊ 859 10
6 56/143-5T 2 175763.00◊ 987 175766.00◊ 987 175769.00◊ 987 10
10 56/143-5T 3 175764.00◊ 1,130 175767.00◊ 1,130 175770.00◊ 1,130 10
15 182/184T 3 — 175696.00 2,108 175698.00 2,108 12
Special Voltage
56/143-5T frame brake kits kits cannot be used on S56 frame motors.
All brake coils are single phase. You can use a 230/460 V coil on a single phase motor by using the 230 volt motor connection and the 230 V brake connection.
♠ For motors having a “P” or “K” for the suffix letter on the date code and having a face mount fan guard.
◊ For 56/145 frame motors having a “B” for the suffix letter for the date code and having a face mount fan guard.
Note: TC frame, JM & JP pump motors having a B or M suffix letter on date code can also use brake kits.
Purpose Motors
Definite
1 1/2 6 10 10
2 6 10 15
3 10 15 25
5 15 25 35
Old Design New Design -
7 1/2 25 35 50
Face Mount
10 25 50 75
15 35 75 105
DC Motors
20 50 105 –
278
Stearns is believed to be the trademark of Rexnord Corporation,
and is not owned or controlled by Regal Beloit Corporation.
Brakemotors
Washguard® Brakekits
Motors
Pump
Kits include a Stearns® NEMA® 4X brake to convert 56 through 145T frame
stock TEFC only motors to fail-safe brakemotors. Food safe white epoxy
finish. BISSC Certified. Adds 5-1/8” to the overall length of 56 through 145T
Washguard TEFC motors.
Washguard
Motors
For 230/460V Three Phase and 230V Single Phase Motors
Brake Mounts App.
Max. HP @
Rating to NEMA Catalog Wt.
(ft-lbs) Frame 1725 RPM Number List Price (lbs.)
3 56/143-5T 1 175771.00 1,608 24
Duty Motors
Agricultural
6 56/143-5T 2 175772.00 1,694 36
10 56/143-5T 3 175773.00 1,785 43
* For 56/145 frame motors having a “B” for the suffix letter for the date code and
having a face mount fan guard.
Specifications are subject to change without notice.
HVAC / Fan
Motors
Coupler Brakes
Special Voltage
problem solver for applications where a brake needs to be added to existing equipment – without
Motors
replacing the motor.
• Rugged cast alumimum or cast iron construction. Stearns brakes are well suited to most industrial
applications. Coupler brakes are designed to be C-face connected on both ends. These brakes are not
suited for overhung loads to be applied to the output shaft.
Purpose Motors
• A wide range of voltages and brake torque ratings in both NEMA 2 and NEMA 4X enclosures are
available from stock. NEMA 2 brakes are best suited for use with standard ODP and TEFC motors.
Definite
NEMA 4X brakes are designed for use with LEESON® Washguard® motors.
Brake Motors
• The 6 ft.lb. brake mounts to NEMA 56C or 143/145TC motors using an optional adaptor sleeve, which is
included with the brake. Output shaft can be either 56C or 143/145TC depending on the location of the
provided adaptor sleeve. A 1/2 NPT threaded lead exit hole is provided for power connections.
IEC Motors
DC Motors
Stearns® Brakes
Washguard
Motors
mounting between the C-face motor and driven equipment. Food safe
white epoxy finish. BISSC Certified. Adds 5” to the overall length of 56C
through 145TC Washguard TEFC or TENV motors. Includes all mounting
components.
Purpose Motors
Motors
Pump
These motors meet North American performance standards and
premium energy efficiency mandates and have a 1.15 service factor.
Washguard
Typically used for replacement on machine tools, textile tools, textile
Motors
machinery and other equipment with metric dimensions but require
the high torque and performance of motors designed for use in
North America.
Duty Motors
Features:
Agricultural
• Cast iron frame construction
• 60/50 Hz interchangeability
• 230 volt brake coil
• IP55 enclosure protection
• B3 mounting
• B5 & B14 flange kits available
HVAC / Fan
• UL listed and CSA certified
Motors
AC Metric - Three Phase - TEFC - B3 Mounting - Rigid Base
Special Voltage
Motors
SYN Brake App. F. L.
% F.L.
Stock
RPM IEC Rating Catalog List Wgt. Amps @ Service “C” Dim.
kW/HP 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1-0.75 1800 80M 6 194222.00 √ 1,493 C80T17FZ47A 54 230/460 3.0 85.5 1.15 13.19 C, CN
1 1/2-1.1 1800 90S 12 194223.00 √ 1,702 C90T17FZ31A 63 230/460 4.2 86.5 1.15 15.48 C, CN
2-1.5 1800 90L 12 194224.00 √ 1,792 C90T17FZ32A 73 230/460 5.6 86.5 1.15 15.48 C, CN
Purpose Motors
3-2.2 1800 100L 24 194225.00 √ 2,162 C100T17FZ49A 117 230/460 7.8 89.5 1.15 18.13 C, CN
4-3 1800 112M 44 194226.00 √ 2,269 C112T17FZ30A 136 230/460 10.6 89.5 1.15 19.08 C, CN
Definite
5 1/2-4 1800 112M 74 194227.00 √ 2,636 C112T17FZ31A 143 230/460 14.0 89.5 1.15 19.08 C, CN
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
80M 176177.00 115 176181.00 96
90S 176178.00 119 176182.00 107
90L 176178.00 119 176182.00 107
100L 176179.00 169 176183.00 162
112M 176180.00 179 176184.00 178
Note! These brakekits can only be used with the IEC brakemotors
IEC Motors
DC Motors
281
IEC Motors
LEESON® Passport Series
Motors
Pump
Stock standard solutions ready to deliver from locations across the country.
Washguard
Motors
Mount: IM B3/B5
Duty Motors
Agricultural
Mount: IM B3
Mount:
IM B3/450 Frame
(custom)
HVAC / Fan
Motors
IEC Motors
Aluminum Cast Iron Permanent Commercial Stainless
Special Voltage
IEC Frame 63–90 100–315 56, 63, 80, 90, 112 56 71–90
Mounting Flanges B3, B5 and B14 B3, B5 and B14 B3, B5 & B14 B14 B5 & B14
Definite
Breakdown Torque
160–200%
NEMA Design B
NEMA Design B
70–275% 70–275% N/A N/A Lock Rotor Torque
Lock Rotor Torque
70–275%
IEC Design N Lock
IEC Design N
75–275% 75–275% N/A N/A Rotor Torque
Lock Rotor Torque
75–275%
Service Factor 1.15 1.15 1.0 1.0 1.15
Inverter Duty 10:1 10:1 SCR 10:1 SCR 10:1 6:1
IEC Motors
Accessories B5 & B14 Flange Kits B5 & B14 Flange Kits B5 & B14 Flange Kits N/A N/A
Shaft Seals Yes Yes Yes Yes Yes
Terminal Boards Yes Yes N/A N/A N/A
IP56 (Encapsulated
IP Construction IP55 IP55 IP54 IP44
designs available)
IE2, IE3 (90 Frame)
Efficiency EPACT and NEMA IE3 – NEMA Premium Varies by HP Varies by HP Standard and EPACT
Premium
DC Motors
Motors
Pump
Washguard
Motors
Duty Motors
Agricultural
These motors meet North American performance standards, premium energy efficiency
mandates, and have 1.15 service factors.
General Specifications:
Typically used for replacement on machine tools, textile tools, textile machinery and other
equipment with metric dimensions but requiring the high torque and performance of motors
HVAC / Fan
Motors
designed for use in North America.
Features:
• Aluminum frame and cast iron frame construction
• DC and stainless steel IEC motors available
Special Voltage
• 60/50 Hz interchangeability
Motors
• B3, B5, B14 mounting flanges
• Flange kits available
• Inverter rated IRIS® insulation system on cast iron AC models
• UL listed and CSA certified
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
283
IEC Motors
AC Metric (IEC) Motors – Three Phase
Motors
Pump
ALUMINUM FRAME
Washguard
Motors
CONFORMITE
Terminal boards included. EUROPEENE
• 230/460V motors have 9 leads.
IP55 weatherproof enclosure • 575V motors have 3 leads.
HVAC / Fan
allows for use in a wide range • All terminal boards have 6 posts.
Motors
airflow efficiency.
Motors
performance.
DC Motors
284
IEC Motors
AC Metric (IEC) Motors – Three Phase
Motors
Pump
Washguard
Motors
CAST IRON FRAME
CSA: File number LR62104
UL: File number E57948 for motors produced June 2003 and later
Duty Motors
Agricultural
Conduit box with neoprene gaskets. Reposition
metric “PG” threaded lead exit by rotating box
in 90 degree increments. Motors 132 frame and
Terminal boards included. larger have second lead exit hole for auxiliary box.
Box is fixed at F3 location.
• 230/460V motors, 132-frame and
HVAC / Fan
larger have 12 leads and 9 post
Motors
terminal boards. Heavy-duty cast iron
construction includes frame,
• 230/460V motors, smaller than endbells and conduit box.
132-frame have 9 leads and 6 post
terminal boards.
• 575V motors have 3 leads and 6
post terminal boards.
High efficiency design utilizes
low-loss steel laminations
Special Voltage
for optimum power and
Motors
performance.
IP55 weatherproof enclosure
allows for use in a wide range
of applications.
Non-sparking fan. Small
size reduces noise and
enhances efficiency.
Purpose Motors
D flange (B5) and C face (B14)
Definite
models available. Field
conversion kits also offered.
Steel fan cover.
Brake Motors
Stainless steel “full fact” nameplate with
information on motor efficiency and power
factor. Stamped with 60 Hz and 50 Hz data
285
IEC Metric Motors
AC Metric (IEC) Motors - B3 - Three Phase - Rigid Base
Motors
Pump
Washguard
Motors
Stock
RPM IEC Catalog List Wgt. Amps @ % F.L. Service Dim.
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/4-0.18 3600 D63 192010.30 D 325 C63T34FZ13 10 230/460 1.0 65.5 1.15 8.35 A, CN
1/4-0.18 3600 D63 192010.00 √ 307 C63T34FZ1 11 230/460 0.8 72.0 1.15 8.54 A, CN
1/4-0.18 1800 D63 192011.00 √ 319 C63T17FZ1 12 230/460 1.1 68.0 1.15 8.54 A, CN
1/4-0.18 1200 D71 192012.00 √ 545 C71T11FZ1 13 230/460 1.2 64.0 1.15 9.44 A, CN
1/3-0.25 3600 D63 192020.30 D 374 C63T34FZ2 10 230/460 1.1 72.0 1.15 8.55 A, CN
1/3-0.25 3600 D63 192020.00 √ 353 C63T34FZ2 12 230/460 1.1 72.0 1.15 8.54 A, CN
HVAC / Fan
Motors
1/3-0.25 1800 D71 192021.30 D 396 C71T17FZ13 16 230/460 1.4 62.4 1.15 9.65 A, CN
1/3-0.25 1800 D71 192021.00 √ 374 C71T17FZ1 16 230/460 1.4 68.0 1.15 9.44 A, CN
1/3-0.25 1200 D80 192022.30 D 616 C80T11FZ19 21 230/460 1.4 61.3 1.15 11.61 A, CN
1/3-0.25 1200 D80 192022.00 √ 582 C80T11FZ1 20 230/460 1.3 70.0 1.15 11.10 A, CN
1/2-0.37 3600 D71 192030.00 √ 383 C71T34FZ1 14 230/460 1.6 74.0 1.15 9.44 A, CN
1/2-0.37 1800 D71 192031.00 √ 389 C71T17FZ2 15 230/460 1.8 74.0 1.15 9.44 A, CN
Special Voltage
1/2-0.37 1200 D80 192032.30 D 646 C80T11FZ20 22 230/460 2.0 61.8 1.15 11.61 A, CN
1/2-0.37 1200 D80 192032.00 √ 610 C80T11FZ2 22 230/460 1.9 72.0 1.15 11.10 A, CN
Motors
3/4-0.55 3600 D71 192040.30 D 424 C71T34FZ14 15 230/460 2.4 74.5 1.15 9.65 A, CN
3/4-0.55 3600 D71 192040.00 √ 400 C71T34FZ2 16 230/460 2.4 74.0 1.15 9.44 A, CN
3/4-0.55 1800 D80 192041.00 √ 423 C80T17FZ1 21 230/460 2.5 74.0 1.15 11.10 A, CN
3/4-0.55 1200 D80 192042.30 D 711 C80T11FZ21 22 230/460 2.8 72.0 1.15 11.61 A, CN
3/4-0.55 1200 D80 192042.00 √ 652 C80T11FZ3 25 230/460 2.7 72.0 1.15 11.10 A, CN
Purpose Motors
1-0.75 3600 D80 192264.00 √ 453 C80T34FZ48 30 230/460 2.8 77.0 1.15 11.10 A, CN
1-0.75 1800 D80 192241.00 √ 524 C80T17FZ54 30 230/460 3.0 85.5 1.15 11.10 A, CN
Definite
1-0.75 1200 D90S 192200.00 √ 783 C90T11FZ13 36 230/460 3.2 82.5 1.15 12.83 A, CN
1 1/2-1.1 3600 D80 192242.00 √ 566 C80T34FZ48 27 230/460 4.0 84.0 1.15 11.10 A, CN
1 1/2-1.1 1800 D90S 192202.30 D 627 C90T17FZ23 43 230/460 4.0 86.5 1.15 13.39 A, CN
1 1/2-1.1 1800 D90S 192202.00 √ 591 C90T17FZ13 40 230/460 4.2 86.5 1.15 12.83 A, CN
2-1.5 3600 D90S 192208.30 D 652 C90T34FZ21 39 230/460 5.0 85.5 1.15 13.39 A, CN
2-1.5 3600 D90S 192208.00 √ 616 C90T34FZ13 36 230/460 5.0 85.5 1.15 12.83 A, CN
Brake Motors
2-1.5 1800 D90L 192205.00 √ 638 C90T17FZ16 42 230/460 5.4 87.5 1.15 13.38 A, CN
2-1.5 1200 DF100L 193300.60 √ 1,158 C100T11FZ20 94 230/460 6.0 88.5 1.15 16.33 C, CN
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
D - Item to be discontinued once inventory is depleted
IEC Motors
DC Motors
286
IEC Metric Motors
AC Metric (IEC) Motors - B3 - Three Phase - Rigid Base
Motors
Pump
Washguard
Motors
Three Phase - TEFC - B3 - Rigid Base - IP55
SYN App. F. L. “C”
Duty Motors
Agricultural
Stock
RPM IEC Catalog List Wgt. Amps @ % F.L. Service Dim.
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
3-2.2 3600 D90L 192209.00 √ 889 C90T34FZ14 40 230/460 7.2 87.5 1.15 13.43 A, CN
3-2.2 1800 DF100L 193301.60 √ 1,123 C100T17FZ41 92 230/460 8.0 90.2 1.15 16.34 C, CN
3-2.2 1200 DF112M 193302.60 √ 1,628 C112T11FZ21 151 230/460 9.6 89.5 1.15 18.43 C, CN
4-3 3600 DF100L 193303.60 √ 1,197 C100T34FZ20 71 230/460 9.2 88.5 1.15 18.43 C, CN
4-3 1800 DF100L 193304.60 √ 1,219 C100T17FZ42 90 230/460 10.0 89.5 1.15 16.34 C, CN
4-3 1200 DF132S 193305.60 √ 1,974 C132T11FZ58 162 230/460 12.4 89.5 1.15 18.27 C, CN
HVAC / Fan
Motors
5 1/2-4 3600 DF112M 193306.60 √ 1,538 C112T34FZ24 114 230/460 12.6 89.5 1.15 16.14 C, CN
5 1/2-4 1800 DF112M 193307.60 √ 1,482 C112T17FZ21 124 230/460 14.0 89.5 1.15 16.14 C, CN
5 1/2-4 1200 DF132M 193308.60 √ 2,281 C132T11FZ59 182 230/460 17.0 89.5 1.15 19.76 C, CN
7 1/2-5.5 3600 DF132S 193309.60 √ 1,929 C132T34FZ45 152 230/460 18.0 89.5 1.15 18.27 C, CN
7 1/2-5.5 1800 DF132S 193310.60 √ 1,929 C132T17FZ43 159 230/460 18.4 92.4 1.15 18.27 C, CN
7 1/2-5.5 1200 DF132M 193311.60 √ 2,742 C132T11FZ60 180 230/460 21.6 91.0 1.15 19.76 C, CN
Special Voltage
10-7.5 3600 DF132S 193312.60 √ 2,062 C132T34FZ46 171 230/460 24.0 90.2 1.15 18.15 C, CN
10-7.5 1800 DF132M 193313.60 √ 2,287 C132T17FZ44 181 230/460 24.0 91.7 1.15 19.76 C, CN
Motors
10-7.5 1200 DF160M 193314.60 √ 3,557 C160T11FZ39 262 230/460 28.8 92.1 1.15 23.62 C, CN
15-11 3600 DF160M 193315.60 √ 3,343 C160T34FZ59 260 230/460 35.0 91.0 1.15 23.62 C, CN
15-11 1800 DF160M 193316.60 √ 3,343 C160T17FZ43 264 230/460 37.0 92.4 1.15 23.62 C, CN
15-11 1200 DF160L 193317.60 √ 4,566 C160T11F240 342 230/460 40.0 91.7 1.15 26.57 C, CN
20-15 3600 DF160M 193318.60 √ 3,920 C160T34FZ60 269 230/460 47.0 91.0 1.15 23.62 C, CN
Purpose Motors
20-15 1800 DF160L 193319.60 √ 4,133 C160T17F244 311 230/460 50.0 93.0 1.15 25.39 C, CN
20-15 1200 DF180L 193320.60 √ 6,400 C180T11FZ20 398 230/460 54.0 92.4 1.15 28.27 C, CN
Definite
25-18.5 3600 DF160L 193321.60 √ 4,772 C160T34FZ61 330 230/460 58.0 91.7 1.15 25.39 C, CN
25-18.5 1800 DF180M 193322.60 √ 5,252 C180T17FZ41 393 230/460 59.0 93.5 1.15 26.77 C, CN
25-18.5 1200 DF200L 193323.60 √ 8,029 C200T11FZ39 530 230/460 66.0 93.6 1.15 29.53 C, CN
30-22 3600 DF180M 193324.60 √ 5,671 C180T34FZ19 355 230/460 69.0 93.0 1.15 26.77 C, CN
30-22 1800 DF180L 193325.60 √ 5,906 C180T17FZ42 441 230/460 70.0 94.1 1.15 28.27 C, CN
30-22 1200 DF200L 193326.60 √ 9,095 C200T11FZ40 478 230/460 77.0 93.8 1.15 29.53 C, CN
Brake Motors
40-30 3600 DF200L 193327.60 √ 8,074 C200T34FZ37 522 230/460 91.0 92.4 1.15 29.53 C, CN
40-30 1800 DF200L 193328.60 √ 8,693 C200T17FZ21 547 230/460 95.0 94.1 1.15 29.53 C, CN
40-30 1200 DF225M 193329.60 C/A 13,661 C225T11FZ21 633 230/460 95.0 94.1 1.15 32.95 C, CN
50-37 3600 DF200L 193330.60 √ 10,588 C200T34FZ38 563 230/460 112.0 94.1 1.15 29.53 C, CN
50-37 1800 DF225S 193331.60 √ 12,056 C225T17FZ21 651 230/460 118.0 94.5 1.15 31.97 C, CN
50-37 1200 DF250M 193332.60 C/A 14,003 C250T11FZ19 670 230/460 120.0 94.1 1.15 36.42 C, CN
60-45 3600 225M 193416.60 √ 10,914 C225T34FZ1A 756 230/460 134 94.1 1.15 31.69 C, CN
60-45 1800 225M 193417.60 √ 12,228 C225T17FZ5A 758 230/460 138 95.0 1.15 32.95 C, CN
IEC Motors
60-45 1200 280S 193418.60 √ 14,621 C280T11FZ1A 1320 230/460 152 95.0 1.15 38.39 C, CN
75-55 3600 250M 193419.60 √ 12,424 C250T34FZ1A 988 230/460 166 93.6 1.15 36.46 C, CN
75-55 1800 250M 193420.60 √ 12,849 C250T17FZ2A 1170 230/460 174 95.4 1.15 36.46 C, CN
75-55 1200 280M 193421.60 √ 15,001 C280T11FZ2A 1446 230/460 190 94.5 1.15 40.39 C, CN
100-75 3600 280S 193422.60 √ 13,228 C280T34FZ1A 1258 230/460 222 94.1 1.15 38.39 C, CN
100-75 1800 280S 193423.60 √ 13,416 C280T17FZ3A 1338 230/460 226 95.4 1.15 38.39 C, CN
100-75 1200 315S 193424.60 √ 18,905 C315T11FZ1A 2020 230/460 226 95.0 1.15 48.82 C, CN
DC Motors
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
C/A - Check availability
287
IEC Metric Motors
AC Metric (IEC) Motors - B3 / B5 Flange - Three Phase - Rigid Base
Motors
Pump
Washguard
Motors
1/3-0.25 3600 D63D 192024.00 √ 407 C63T34FZ6 12 230/460 1.1 72.0 1.15 8.54 A, CN
Motors
1/3-0.25 1800 D71D 192025.00 √ 420 C71T17FZ5 15 230/460 1.4 68.0 1.15 9.44 A, CN
1/3-0.25 1200 D80D 192026.30 D 714 C80T11FZ22 21 230/460 1.4 70.0 1.15 11.61 A, CN
1/3-0.25 1200 D80D 192026.00 √ 674 C80T11FZ7 20 230/460 1.3 70.0 1.15 11.10 A, CN
1/2-0.37 3600 D71D 192034.30 D 457 C71T34FZ15 13 230/460 1.6 77.0 1.15 9.65 A, CN
1/2-0.37 3600 D71D 192034.00 √ 419 C71T34FZ5 13 230/460 1.6 74.0 1.15 9.44 A, CN
1/2-0.37 1800 D71D 192035.00 √ 433 C71T17FZ6 15 230/460 1.8 74.0 1.15 9.44 A, CN
Special Voltage
1/2-0.37 1200 D80D 192036.00 √ 696 C80T11FZ8 22 230/460 1.9 72.0 1.15 11.10 A, CN
Motors
3/4-0.55 3600 D71D 192044.00 √ 442 C71T34FZ6 16 230/460 2.4 74.0 1.15 9.44 A, CN
3/4-0.55 1800 D80D 192045.00 √ 470 C80T17FZ5 21 230/460 2.5 74.0 1.15 11.10 A, CN
3/4-0.55 1200 D80D 192046.30 D 784 C80T11FZ24 25 230/460 2.8 72.0 1.15 11.61 A, CN
3/4-0.55 1200 D80D 192046.00 √ 740 C80T11FZ9 26 230/460 2.7 72.0 1.15 11.10 A, CN
1-0.75 3600 D80D 192265.00 √ 487 C80T34FZ49 30 230/460 2.8 77.0 1.15 11.10 A, CN
1-0.75 1800 D80D 192244.00 √ 574 C80T17FZ55 29 230/460 3.0 85.5 1.15 11.10 A, CN
Purpose Motors
1-0.75 1200 D90SD 192201.00 √ 896 C90T11FZ14 41 230/460 3.2 82.5 1.15 12.83 A, CN
1 1/2-1.1 3600 D80D 192245.00 √ 622 C80T34FZ49 30 230/460 4.0 84.0 1.15 12.83 A, CN
Definite
1 1/2-1.1 1800 D90SD 192203.00 √ 649 C90T17FZ14 41 230/460 4.2 86.5 1.15 12.83 A, CN
2-1.5 3600 D90SD 192210.00 √ 708 C90T34FZ15 36 230/460 5.0 85.5 1.15 12.83 A, CN
2-1.5 1800 D90LD 192206.00 √ 728 C90T17FZ17 46 230/460 5.4 86.5 1.15 12.83 A, CN
2-1.5 1200 DF100LD 193333.60 √ 1,331 C100T11F221 105 230/460 6.0 88.5 1.15 16.33 C, CN
3-2.2 3600 D90LD 192211.00 √ 1,001 C90T34FZ16 40 230/460 7.2 87.5 1.15 12.83 A, CN
3-2.2 1800 DF100LD 193334.60 √ 1,292 C100T17FZ43 84 230/460 8.0 90.2 1.15 16.33 C, CN
Brake Motors
3-2.2 1200 DF112MD 193335.60 √ 1,821 C112T11FZ22 146 230/460 9.6 89.5 1.15 16.14 C, CN
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
IEC Motors
DC Motors
288
IEC Metric Motors
AC Metric (IEC) Motors - B3 / B5 Flange - Three Phase - Rigid Base
Motors
Pump
Washguard
Motors
Three Phase - TEFC - B3 / B5 Flange - Rigid Base - IP55
Duty Motors
Agricultural
SYN App. F. L. “C”
RPM IEC Catalog Stock List Wgt. Amps @ % F.L. Service Dim.
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
4-3 3600 DF100LD 193336.60 √ 1,368 C100T34FZ21 103 230/460 9.2 89.5 1.15 16.33 C, CN
4-3 1800 DF100LD 193337.60 √ 1,389 C100T17FZ44 115 230/460 10.0 89.5 1.15 16.33 C, CN
4-3 1200 DF132SD 193338.60 √ 2,228 C132T11FZ61 154 230/460 12.4 89.5 1.15 18.26 C, CN
5 1/2-4 3600 DF112MD 193339.60 √ 1,722 C112T34FZ25 104 230/460 12.6 89.5 1.15 16.14 C, CN
HVAC / Fan
5 1/2-4 1800 DF112MD 193340.60 √ 1,668 C112T17FZ22 130 230/460 14.0 89.5 1.15 16.14 C, CN
Motors
5 1/2-4 1200 DF132MD 193341.60 √ 2,538 C132T11FZ62 196 230/460 17.0 89.5 1.15 18.26 C, CN
7 1/2-5.5 3600 DF132SD 193342.60 √ 2,175 C132T34F247 152 230/460 18.0 89.5 1.15 18.26 C, CN
7 1/2-5.5 1800 DF132SD 193343.60 √ 2,175 C132T17FZ45 188 230/460 18.4 92.4 1.15 18.26 C, CN
7 1/2-5.5 1200 DF132MD 193344.60 √ 3,001 C132T11FZ63 180 230/460 21.6 91.0 1.15 18.26 C, CN
10-7.5 3600 DF132SD 193345.60 √ 2,323 C132T34FZ48 171 230/460 24.0 90.2 1.15 18.26 C, CN
10-7.5 1800 DF132MD 193346.60 √ 2,545 C132T17FZ46 208 230/460 24.0 91.7 1.15 19.76 C, CN
Special Voltage
10-7.5 1200 DF160MD 193347.60 √ 4,044 C160T11FZ41 251 230/460 28.8 91.7 1.15 23.62 C, CN
Motors
15-11 3600 DF160MD 193348.60 √ 3,831 C160T34FZ62 260 230/460 35.0 91.0 1.15 23.62 C, CN
15-11 1800 DF160MD 193349.60 √ 3,831 C160T17FZ45 264 230/460 37.0 92.4 1.15 23.62 C, CN
15-11 1200 DF160LD 193350.60 √ 5,053 C160T11FZ42 330 230/460 40.0 91.7 1.15 26.57 C, CN
20-15 3600 DF160MD 193351.60 √ 4,131 C160T34FZ63 269 230/460 47.0 91.0 1.15 23.62 C, CN
20-15 1800 DF160LD 193352.60 √ 4,357 C160L17FZ46 325 230/460 50.0 93.0 1.15 25.39 C, CN
20-15 1200 DF180LD 193353.60 √ 6,627 C180T11FZ21 385 230/460 53.5 92.4 1.15 26.77 C, CN
Purpose Motors
25-18.5 3600 DF160LD 193354.60 √ 4,967 C160T34FZ64 330 230/460 58.0 91.7 1.15 25.39 C, CN
25-18.5 1800 DF180MD 193355.60 √ 5,545 C180T17FZ43 393 230/460 58.5 93.0 1.15 26.77 C, CN
Definite
30-22 3600 DF180MD 193356.60 √ 5,936 C180T34FZ20 355 230/460 69.0 93.0 1.15 26.77 C, CN
30-22 1800 DF180LD 193357.60 √ 6,160 C180T17FZ44 456 230/460 70.0 94.1 1.15 28.26 C, CN
Note listing on inside back flap
Shaded model numbers are cast iron frame
Specifications are subject to change without notice
Green items are Premium Efficient
Note: Aluminum motors have removable feet for round-body applications.
Brake Motors
Larger HP B3 Foot-Mounted metric motors on page 287 can be converted
to B3/B5 Flange-Mount by installing B5 Flange Kits
IEC Motors
DC Motors
289
IEC Metric Motors
AC Metric (IEC) Motors - B3 / B14 Flange - Three Phase - Rigid Base
Motors
Pump
Washguard
Motors
1/3-0.25 3600 D63C 192027.00 √ 403 C63T34FZ4 12 230/460 1.1 72.0 1.15 8.54 A, CN
Motors
1/3-0.25 1800 D71C 192028.00 √ 409 C71T17FZ3 14 230/460 1.4 68.0 1.15 9.44 A, CN
1/3-0.25 1200 D80C 192029.30 D 714 C80T11FZ25 20 230/460 1.4 70.0 1.15 11.61 A, CN
1/3-0.25 1200 D80C 192029.00 √ 674 C80T11FZ4 20 230/460 1.3 70.0 1.15 11.10 A, CN
1/2-0.37 3600 D71C 192037.00 √ 410 C71T34FZ3 14 230/460 1.6 74.0 1.15 9.44 A, CN
1/2-0.37 1800 D71C 192038.00 √ 426 C71T17FZ4 15 230/460 1.8 74.0 1.15 9.44 A, CN
1/2-0.37 1200 D80C 192039.00 √ 696 C80T11FZ5 22 230/460 1.9 72.0 1.15 11.10 A, CN
Special Voltage
3/4-0.55 3600 D71C 192047.30 D 472 C71T34FZ18 15 230/460 2.4 74.5 1.15 9.65 A, CN
Motors
3/4-0.55 3600 D71C 192047.00 √ 433 C71T34FZ4 15 230/460 2.4 74.0 1.15 9.44 A, CN
3/4-0.55 1800 D80C 192048.00 √ 465 C80T17FZ3 21 230/460 2.5 74.0 1.15 11.10 A, CN
3/4-0.55 1200 D80C 192049.00 √ 740 C80T11FZ6 25 230/460 2.7 72.0 1.15 11.10 A, CN
1-0.75 3600 D80C 192266.00 √ 474 C80T34FZ50 15 230/460 2.8 77.0 1.15 11.10 A, CN
1-0.75 1800 D80C 192247.00 √ 559 C80T17FZ56 30 230/460 3.0 85.5 1.15 11.10 A, CN
1-0.75 1200 D90SC 192212.00 √ 896 C80T11FZ15 36 230/460 3.2 82.5 1.15 12.83 A, CN
Purpose Motors
1 1/2-1.1 3600 D80C 192248.00 √ 610 C80T34FZ18 30 230/460 4.0 84.0 1.15 11.61 A, CN
Definite
1 1/2-1.1 1800 D90SC 192204.00 √ 636 C90T17FZ15 40 230/460 4.2 86.5 1.15 12.83 A, CN
2-1.5 3600 D90SC 192213.00 √ 692 C90T34FZ17 36 230/460 5.0 85.5 1.15 12.83 A, CN
2-1.5 1800 D90LC 192207.00 √ 708 C90T17FZ18 42 230/460 5.4 86.5 1.15 12.83 A, CN
290
IEC Metric Motors
AC Metric (IEC) Motors - B3 / B14 Flange - Three Phase - Rigid Base
Motors
Pump
Washguard
Motors
Three Phase - TEFC - B3 / B14 Flange - Rigid Base - IP55
Duty Motors
Agricultural
SYN Stock App. F. L. “C”
RPM IEC Catalog List Wgt. Amps @ % F.L. Service Dim.
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
3-2.2 3600 D90LC 192214.00 √ 1,001 C90T34FZ18 39 230/460 7.2 87.5 1.15 12.83 A, CN
3-2.2 1800 DF100LC 193359.60 √ 1,292 C100T17FZ45 84 230/460 8.0 90.2 1.15 16.33 C, CN
3-2.2 1200 DF112MC 193360.60 √ 1,821 C112T11FZ23 84 230/460 9.6 89.5 1.15 16.14 C, CN
4-3 3600 DF100LC 193361.60 √ 1,368 C100T34FZ22 71 230/460 9.2 88.5 1.15 16.33 C, CN
HVAC / Fan
4-3 1800 DF100LC 193362.60 √ 1,389 C100T17FZ46 84 230/460 10.0 89.5 1.15 16.33 C, CN
Motors
4-3 1200 DF132SC 193363.60 √ 2,228 C132T11FZ64 154 230/460 12.4 89.5 1.15 18.26 C, CN
5 1/2-4 3600 DF112MC 193364.60 √ 1,722 C112T34FZ26 104 230/460 12.6 88.5 1.15 16.14 C, CN
5 1/2-4 1800 DF112MC 193365.60 √ 1,668 C112T17FZ23 104 230/460 14.0 89.5 1.15 16.14 C, CN
5 1/2-4 1200 DF132MC 193366.60 √ 2,538 C132T11FZ65 176 230/460 17.0 89.5 1.15 19.76 C, CN
7 1/2-5.5 3600 DF132SC 193367.60 √ 2,175 C132T34F249 152 230/460 18.0 89.5 1.15 18.27 C, CN
7 1/2-5.5 1800 DF132SC 193368.60 √ 2,175 C132T17FZ47 150 230/460 18.4 91.7 1.15 19.76 C, CN
Special Voltage
7 1/2-5.5 1200 DF132MC 193369.60 √ 3,001 C132T11FZ66 180 230/460 21.6 91.0 1.15 19.76 C, CN
Motors
10-7.5 3600 DF132SC 193370.60 √ 2,323 C132T34FZ50 163 230/460 24.0 90.2 1.15 19.76 C, CN
10-7.5 1800 DF132MC 193371.60 √ 2,545 C132T17FZ48 174 230/460 24.0 91.7 1.15 19.76 C, CN
10-7.5 1200 DF160MC 193372.60 √ 4,044 C160T11FZ43 251 230/460 28.8 92.1 1.15 23.62 C, CN
15-11 3600 DF160MC 193373.60 √ 3,831 C160T34FZ65 260 230/460 35.0 91.0 1.15 23.62 C, CN
15-11 1800 DF160MC 193374.60 √ 3,831 C160T17FZ47 264 230/460 37.0 92.4 1.15 23.62 C, CN
15-11 1200 DF160LC 193375.60 √ 5,053 C160T11FZ44 330 230/460 40.0 91.7 1.15 26.57 C, CN
Purpose Motors
20-15 3600 DF160MC 193376.60 √ 4,380 C160T34FZ66 269 230/460 47.0 91.0 1.15 23.62 C, CN
Definite
20-15 1800 DF160LC 193377.60 √ 4,618 C160T17FZ48 311 230/460 50.0 93.0 1.15 25.39 C, CN
25-18.5 3600 DF160LC 193378.60 √ 5,264 C160T34FZ67 319 230/460 58.0 91.7 1.15 25.39 C, CN
Brake Motors
to B3/B14 Flange-Mount by installing B14 Flange Kits
IEC Motors
DC Motors
291
IEC Metric Motors
575 Volt Metric Motors
Motors
Pump
1/3-0.25 1800 D71 192098.00 √ 374 C71T17FZ7 13 575 0.6 67.0 1.15 9.45 A, CN
1/2-0.37 3600 D71 192106.00 √ 383 C71T34FZ7 13 575 0.7 74.0 1.15 9.45 A, CN
1/2-0.37 1800 D71 192107.30 D 424 C71T17FZ20 14 575 0.8 71.5 1.15 9.65 A, CN
1/2-0.37 1800 D71 192107.00 √ 389 C71T17FZ10 14 575 0.7 74.0 1.15 9.45 A, CN
3/4-0.56 3600 D71 192115.00 √ 400 C71T34FZ10 15 575 0.9 74.0 1.15 9.45 A, CN
3/4-0.56 1800 D80 192116.30 D 461 C80T17FZ19 18 575 0.9 73.9 1.15 11.61 A, CN
Special Voltage
3/4-0.56 1800 D80 192116.00 √ 423 C80T17FZ7 18 575 1.0 73.0 1.15 11.10 A, CN
Motors
1-0.75 3600 D80 192124.30 D 480 C80T34FZ19 21 575 1.3 77.0 1.15 11.61 A, CN
1-0.75 3600 D80 192267.00 √ 453 C80T34FZ51 21 575 1.1 77.0 1.15 11.10 A, CN
1-0.75 1800 D80 192125.30 D 491 C80T17FZ20 26 575 1.3 73.6 1.15 11.61 A, CN
1-0.75 1800 D80 192250.00 √ 524 C80T17FZ57 26 575 1.4 85.5 1.15 11.10 A, CN
1 1/2-1.1 3600 D80 192133.30 D 533 C80T34FZ20 27 575 1.7 77.9 1.15 11.61 A, CN
1 1/2-1.1 3600 D80 192251.30 D 597 C80T34FZ47 27 575 1.6 82.5 1.15 11.10 A, CN
Purpose Motors
1 1/2-1.1 3600 D80 192251.00 √ 566 C80T34FZ53 27 575 1.6 84.0 1.15 11.10 A, CN
1 1/2-1.1 1800 D90S 192230.30 D 544 C90T17FZ30 37 575 1.8 86.5 1.15 12.83 A, CN
Definite
1 1/2-1.1 1800 D90S 192230.00 √ 514 C90T17FZ19 37 575 1.8 86.5 1.15 12.83 A, CN
2-1.5 3600 D90S 192231.00 √ 537 C90T34FZ19 33 575 2.2 86.5 1.15 12.83 A, CN
2-1.5 1800 D90L 192232.30 D 586 C90T17FZ29 38 575 2.3 85.5 1.15 12.83 A, CN
2-1.5 1800 D90L 192232.00 √ 553 C90T17FZ20 38 575 2.3 85.5 1.15 12.83 A, CN
3-2.2 3600 D90L 192233.30 D 815 C90T34FZ28 39 575 3.0 86.5 1.15 13.43 A, CN
3-2.2 3600 D90L 192233.00 √ 771 C90T34FZ20 39 575 3.0 86.5 1.15 13.42 A, CN
Brake Motors
3-2.2 1800 DF100L 193379.60 √ 1,123 C100T17FZ47 84 575 3.2 89.5 1.15 16.33 C, CN
4-3 3600 DF100L 193380.60 √ 1,197 C100T34FZ23 71 575 3.1 88.5 1.15 16.33 C, CN
4-3 1800 DF100L 193381.60 √ 1,219 C100T17FZ48 84 575 4.0 89.5 1.15 16.33 C, CN
5 1/2-4 3600 DF112M 193382.60 √ 1,538 C112T34FZ27 104 575 5.1 88.5 1.15 16.14 C, CN
5 1/2-4 1800 DF112M 193383.60 √ 1,482 C112T17FZ24 104 575 5.6 89.5 1.15 18.42 C, CN
7 1/2-5.5 3600 DF132S 193384.60 √ 1,929 C132T34FZ51 152 575 7.0 89.5 1.15 18.26 C, CN
7 1/2-5.5 1800 DF132S 193385.60 √ 1,929 C132T17FZ49 150 575 7.9 91.7 1.15 18.27 C, CN
10-7.5 3600 DF132S 193386.60 √ 2,062 C132T34FZ52 163 575 9.6 90.2 1.15 18.26 C, CN
IEC Motors
10-7.5 1800 DF132M 193387.60 √ 2,287 C132T17FZ50 174 575 9.6 91.7 1.15 18.26 C, CN
Shaded model numbers are cast iron frame Continued On Next Page
Green items are Premium Efficient Note listing on inside back flap
D - Item to be discontinued once inventory is depleted Specifications are subject to change without notice
DC Motors
292
IEC Metric Motors
575 Volt Metric Motors
Motors
Pump
AC Metric (IEC) Motors - B3 Flange - Three Phase - Rigid Base
Washguard
Motors
Three Phase - TEFC - B3 Flange - Rigid Base - IP55
Duty Motors
Agricultural
SYN Stock App. F. L. “C”
RPM IEC Catalog List Wgt. Amps @ % F.L. Service Dim.
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
15-11 3600 DF160M 193388.60 √ 3,343 C160T34FZ68 260 575 14.0 91.0 1.2 23.62 C, CN
15-11 1800 DF160M 193389.60 √ 3,343 C160T17FZ49 264 575 14.5 92.4 1.15 23.62 C, CN
20-15 3600 DF160M 193390.60 √ 3,920 C160T34FZ69 269 575 18.4 91.0 1.15 23.62 C, CN
20-15 1800 DF160L 193391.60 √ 4,133 C160T17FZ50 311 575 20.0 93.0 1.15 23.62 C, CN
HVAC / Fan
Motors
25-18.5 3600 DF160L 193392.60 √ 4,772 C160T34FZ70 319 575 23.2 91.7 1.15 23.62 C, CN
25,85 1800 DF180M 193393.60 √ 5,252 C180T17FZ45 381 575 23.0 93.6 1.15 26.77 C, CN
30-22 3600 DF180M 193394.60 √ 5,671 C180T34FZ21 355 575 27.4 91.7 1.15 26.77 C, CN
30-22 1800 DF180L 193395.60 √ 5,906 C180T17FZ46 427 575 28.0 93.6 1.15 26.77 C, CN
40-30 3600 DF200L 193396.60 √ 8,074 C200T34FZ39 522 575 28.4 92.4 1.15 29.52 C, CN
40-30 1800 DF200L 193397.60 √ 8,693 C200T17FZ22 531 575 38.0 94.7 1.15 29.52 C, CN
Special Voltage
50-37 3600 DF200L 193398.60 C/A 10,588 C200T34FZ40 546 575 45.0 93.0 1.15 29.52 C, CN
Motors
50-37 1800 DF225S 193399.60 C/A 12,056 C225T17FZ22 632 575 47.5 94.5 1.15 32.95 C, CN
Shaded model numbers are cast iron frame Note listing on inside back flap
Specifications are subject to change without notice
Green items are Premium Efficient
C/A - Check Availability
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
293
IEC Metric Motors
Metric Motor Kits - B5 & B14 Flanges
Motors
Pump
Specifications:
• Includes parts to convert B3 rigid motors to either a B5 or B14 flange
Flange Kits - IEC Motors
Washguard
Motors
IEC Frame RPM B5 Flange Kit List Price B14 Flange Kit List Price
63 3600 175850.00 83 175851.00 74
63 3600 175850.30 88 175851.30 78
63 1800 175850.00 83 175851.00 74
63 1800 175850.30 88 175851.30 78
63 1200 175850.00 83 175851.00 74
Duty Motors
Motors
Pump
Specifications:
Used to convert a metric motor to have a reduced B14 flange mount.
Example: You can change an 80 frame IEC motor to have a 71 frame B14
flange. Comes complete with necessary hardware and oil seals for easy
Washguard
field mounting.
Motors
IEC Motor B14 Flange
Frame Frame Catalog Number List Price
63 56 175900.00 66 Used to convert “.00” design motors only
71 63 175901.00 73 No reduced diameter kits for “.30” series IEC motors
Duty Motors
80 71 175902.00 83
Agricultural
90 80 175903.00 86
IEC Brakemotors
These motors meet North American performance standards, premium NEW!
energy efficiency mandates and have a 1.15 service factor. Typically used
HVAC / Fan
for replacement on machine tools, textile tools, textile machinery and
Motors
other equipment with metric dimensions but requires the high torque and
performance of motors designed for use in North America.
Features:
• Cast iron frame construction
Special Voltage
• 60/50 Hz interchangeability
Motors
• 230 volt brake coil
• IP55 enclosure protection
• B3 mounting
• B5 & B14 flange kits available
• UL listed and CSA certified
Purpose Motors
Definite
AC Metric - Three Phase - TEFC - B3 Mounting - Rigid Base
SYN Brake App. F. L.
Stock
RPM NEMA Rating Catalog List Wgt. Amps @ % F.L. Service “C” Dim.
Brake Motors
HP/kW 60 Hz Frame (ft-lbs) Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1-0.75 1800 80M 6 194222.00 √ 1,493 C80T17FZ47A 52 230/460 3.00 83.5% 1.15 13.19 C, CN
1 1/2-1.1 1800 90S 12 194223.00 √ 1,702 C90T17FZ31A 81 230/460 4.22 86.5% 1.15 15.48 C, CN
2-1.5 1800 90L 12 194224.00 √ 1,792 C90T17FZ32A 81 230/460 5.62 86.5% 1.15 15.48 C, CN
3-2.2 1800 100L 24 194225.00 √ 2,162 C100T17FZ49A 110 230/460 7.84 89.5% 1.15 18.13 C, CN
4-3 1800 112M 44 194226.00 √ 2,269 C112T17FZ30A 130 230/460 10.50 89.5% 1.15 19.08 C, CN
5 1/2-4 1800 112M 74 194227.00 √ 2,636 C112T17FZ31A 136 230/460 14.00 89.5% 1.15 19.08 C, CN
IEC Motors
Green items are Premium Efficient Note listing on inside back flap
Specifications are subject to change without notice
Stock
RPM IEC Catalog List Wgt. Amps @ % F.L. Service Dim.
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/3-0.25 1800 71 103403.00 √ 1,632 CZ4T17VZ16 30 208-230/460 1.3 70.5 1.15 9.87 S, US, 12
1/3-0.25 1800 80 103405.00 √ 1,632 CZ4T17VZ17 30 208-230/460 1.3 70.5 1.15 9.87 S, US, 12
1/2-0.37 1800 71 103404.00 √ 1,687 CZ4T17VZ6 32 208-230/460 1.6 76.0 1.15 11.62 S, US, 12
Duty Motors
Agricultural
1/2-0.37 1800 80 103406.00 √ 1,687 CZ4T17VZ7 32 208-230/460 1.6 76.0 1.15 11.62 S, US, 12
3/4-0.55 1800 80 103407.00 √ 1,789 CZ4T17WZ9 38 208-230/460 2.3 77.0 1.15 12.26 S, US, 13
1- 0.75 1800 90 119507.00 √ 2,080 CZ6T17WC55 47 230/460 3.2 85.5 1.15 12.59 S, US, 13
1.5 - 1.1 1800 90 119508.00 √ 2,178 CZ6T17WC60 52 230/460 4.8 86.5 1.15 13.34 S, US, 13
2 - 1.5 1800 90 119509.00 √ 2,374 CZ6T17WC59 49 208-230/460 5.8 86.5 1.15 13.84 S, US, 13
Green items are Premium Efficient Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
HVAC / Fan
Motors
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
Motors
1/3-0.25 1800 71 103395.00 √ 1,772 CZ4T17VZ13 30 208-230/460 1.3 70.5 1.15 9.83 S, US, 12
1/3-0.25 1800 80 103397.00 √ 1,632 CZ4T17VZ14 30 208-230/460 1.3 70.5 1.15 9.72 S, US, 12
1/2-0.37 1800 71 103396.00 √ 1,687 CZ4T17VZ3 32 208-230/460 1.6 76.0 1.15 11.58 S, US, 12
1/2-0.37 1800 80 103398.00 √ 1,687 CZ4T17VZ4 32 208-230/460 1.6 76.0 1.15 11.58 S, US, 12
3/4-0.55 1800 80 103399.00 √ 1,789 CZ4T17WZ7 38 208-230/460 2.3 77.0 1.15 12.48 S, US, 13
Note 12 - TENV Note listing on inside back flap
Purpose Motors
HP/kW 60 Hz Frame Number Price Model Number (lbs) Voltage 230 V Eff. Factor (Inches) Notes
1/3-0.25 1800 80 103408.00 √ 1,659 CZ4T17VZ18 30 208-230/460 1.3 70.5 1.15 9.50 S, US, 12
1/2-0.37 1800 80 103409.00 √ 1,711 CZ4T17VZ8 32 208-230/460 1.6 76.0 1.15 12.75 S, US, 12
3/4-0.55 1800 80 103410.00 √ 1,883 CZ4T17WZ10 38 208-230/460 2.3 77.0 1.15 12.26 S, US, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
IEC Motors
3/4-0.55 1800 80 103402.00 √ 1,932 CZ4T17WZ8 39 208-230/460 2.3 77.0 1.15 12.48 S, US, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
296
IEC Metric Motors
Metric (IEC) Frame PMDC Motors - All-Stainless DC Motors - SCR Rated
Motors
Pump
IP55 Enclosure Protection
TEFC - SCR Rated 180V - C Face With Base
App. Control F.L. “C”
Washguard
Stock
Motors
Full Load IEC Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP/kW RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/3 - 0.25 1750 80D 109068.00 √ 1,684 4D17VK27 44 180 230 1.9 12.81 S, US, 12
1/2 - 0.37 1750 80D 109071.00 √ 1,967 4D17WK11 46 180 230 2.7 13.87 S, US, 13
3/4 - 0.55 1750 80D 109074.00 √ 2,395 4D17WK15 48 180 230 3.7 15.37 S, US, 13
1 - 0.75 1750 80D 109077.00 √ 2,779 4D17WK18 50 180 230 5.0 16.37 S, US, 13
Base is welded to frame and not removable. Note listing on inside back flap
Duty Motors
Agricultural
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
Full Load IEC Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP/kW RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
HVAC / Fan
1/3 - 0.25 1750 80D 109081.00 √ 1,647 4D17VC8 44 180 230 1.9 12.81 S, US, 12
Motors
1/2 - 0.37 1750 80D 109084.00 √ 1,932 4D17WC4 46 180 230 2.7 13.87 S, US, 13
3/4 - 0.55 1750 80D 109087.00 √ 2,358 4D17WC7 48 180 230 3.7 15.37 S, US, 13
1 - 0.75 1750 80D 109090.00 √ 2,744 4D17WC10 50 180 230 5.0 16.37 S, US, 13
Special Voltage
Motors
Flange And Face Kits for Stainless Steel DC Metric (IEC) Frame Motors
The modular design concept of LEESON’s other metric DC motors has been applied to the all-stainless
metric motors. Any flange or face kit can mount on any motor. This allows the greatest flexibility from the
smallest inventory of motors.
Purpose Motors
Definite
B5 Flange Kits (For Stainless DC Metric Motors)
App. BD AK BF AJ
IEC Catalog List Wgt. Flange Register Hole Bolt Circle
Frame Number Price (lbs) Dia. (mm) (mm) (mm) (mm)
71 175593.00 212 2 160 110 9 130
80 175594.00 255 3 200 130 12 165
Brake Motors
90S/90L 175594.00 255 3 200 130 12 165
100L/112M 175595.00 399 5 250 180 15 215
Specifications are subject to change without notice
297
IEC Metric Motors
DC Metric Motors
Motors
Pump
Application Notes:
Please note that one or more of the mounting kits must be used with IEC
motors of these frame sizes. See listing on next page for B5 flange and B14
Washguard
General Specifications:
• Built to IEC 34-1 electrical and mechanical standards
• IEC 63 and smaller frames supplied with an integral B5 flange or B14 face
• Optional B3 Rigid base kit available
Duty Motors
• IEC 71 frame and larger can be field modified for B3 rigid base, B5 flange,
Agricultural
Features:
• Terminal board provided for connections
• All metric fasteners
HVAC / Fan
• Simple 2-lead
Motors
F.L.
Definite
0.12/1/6 1750 63 M1130148.00 √ 653 CIM34D18FD1 7 180 230 0.9 8.30 S, US, 13
0.18/1/4 3000 63 M1130152.00 √ 604 CIM34D30ND3 11 180 230 1.3 8.78 S, US, 12
0.18/1/4 1750 63 M1130149.00 √ 702 CIM34D18FD2 13 180 230 1.3 9.50 S, US, 13
0.25/1/3 3000 63 M1130153.00 √ 669 CIM34D30FD1 11 180 230 1.7 9.50 S, US, 13
These motors have accommodations for B3 base mountings with the kits - see page 314 Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
IEC Motors
298
IEC Metric Motors
DC Metric Motors
Motors
Pump
Metric (IEC) Frame - SCR Rated - IP54
Washguard
Motors
180 volts - Totally Enclosed - B14 Flange
Full App. Control F.L. Amps
Stock
Load IEC Catalog List Wgt. DC Volts AC @ 180 “C” Dim.
kW/HP RPM Frame Number Price Model Number (lbs) Voltage Input VDC (Inches) Notes
0.06/1/12 3000 56 M1110024.00 √ 477 980.542 6 180 230 0.4 6.34 S, US, 12
Duty Motors
Agricultural
0.06/1/12 1750 56 M1130136.00 √ 578 CIM34D18NC5 8 180 230 0.5 6.24 S, US, 12
0.09/1/8 3000 56 M1130140.00 √ 533 CIM34D30NC1 9 180 230 0.7 6.74 S, US, 12
0.09/1/8 1750 56 M1130137.00 √ 620 CIM34D18NC6 14 180 230 0.7 7.55 S, US, 12
0.12/1/6 3000 56 M1130141.00 √ 600 CIM34D30NC2 10 180 230 0.9 7.55 S, US, 12
0.12/1/6 1750 63 M1130138.00 √ 653 CIM34D18FC1 8 180 230 0.9 8.30 S, US, 13
0.18/1/4 3000 63 M1130142.00 √ 604 CIM34D30NC3 10 180 230 1.3 8.78 S, US, 12
0.18/1/4 1750 63 M1130139.00 √ 702 CIM34D18FC2 10 180 230 1.3 9.50 S, US, 13
HVAC / Fan
0.25/1/3 3000 63 M1130143.00 √ 669 CIM34D30FC1 10 180 230 1.7 9.50 S, US, 13
Motors
Except for M1110024.00, these motors have accommodations Note listing on inside back flap
for B3 base mountings with the kits - see page 314 Specifications are subject to change without notice
Note 12 - TENV
Note 13 - TEFC
Special Voltage
Motors
Purpose Motors
180 volts - Totally Enclosed - Round Body
Definite
Full App. Control F.L. Amps
Stock
Brake Motors
0.37/1/2 1750 71 098015.00 √ 792 42D17FT2 26 180 230 2.5 11.78 S, US
0.55/3/4 3000 71 098017.00 √ 858 42D34FT2 24 180 230 3.6 11.78 S, US
0.55/3/4 1750 80 108369.00 √ 981 4D17FT1 34 180 230 3.5 14.64 S, US
0.75/1 3000 80 108372.00 √ 981 4D34FT1 45 180 230 4.9 14.64 S, US
0.75/1 1750 80 108370.00 √ 1,210 4D17FT2 48 180 230 4.6 17.14 S, US
1.1/11/2 3000 80 108373.00 √ 1084 4D34FT2 47 180 230 7.1 16.14 S, US
1.1/11/2 1750 80 108371.00 √ 1,597 4D17FT3 52 180 230 7.0 17.14 S, US
1.1/11/2 1750 90L 118007.00 √ 2,379 CI6D17FT1 64 180 230 7.5 18.97 S, US
IEC Motors
1.5/2 3000 90L 118009.00 √ 2,583 CI6D34FT1 72 180 230 10.0 18.47 S, US
1.5/2 1750 90L 118008.00 √ 2,854 CI6D17FT2 84 180 230 9.5 20.47 S, US
2.2/3 3000 90L 118010.00 √ 3,099 CI6D34FT2 82 180 230 16.0 19.47 S, US
2.2/3 1750 112M 118014.00 √ 3,984 CI6D17FK1 90 180 230 14.0 21.79 S, US
IMPORTANT: These round body motors require either a B3 rigid base, B14 face or Note listing on inside back flap
B5 flange kit - see page 314. Catalog number 118014.00 comes complete with IEC Specifications are subject to change without notice
112 B14 face and B3 foot; shaft diameter is 24mm.
DC Motors
299
IEC Metric Motors
Metric (IEC) Frame - SCR Rated
Motors
Pump
IEC Catalog
Frame Number List Price
56 175142.00 87
63 175143.00 80
71 175144.00 88
80 175145.00 95
Duty Motors
Agricultural
80 175784.00† 95
90 175146.00 66
Flange Kits
HVAC / Fan
300
IEC Metric Motors
DC Metric Motors
Motors
Pump
Metric (IEC) Frame - SCR Rated
Washguard
Motors
Duty Motors
Agricultural
IEC Frame Dimensions (Millimeters)
IEC Mounting Shaft B14 Face/B5 Flange General
Frame 2E 2F BA D H U AHG KEY S R TAP AJ AK BD BF BB AB XP B O
HVAC / Fan
Motors
56 90 71 36 56 6 9 20 15 3 7,0 M3 65 100 50 80 80 120 M5 7 2.5 2.5 83 96 90 99
63 100 80 40 63 7 11 23 19 4 9,0 M4 75 115 60 95 90 140 M5 9 2.5 3.0 116 96 96 108
71 112 90 45 71 7 14 30 26 5 11,5 M5 85 130 70 110 105 160 M6 9 2.5 3.5 114 130 105 132
80 125 100 50 80 10 19 40 33 6 16,0 M6 100 165 80 130 120 200 M6 12 3.0 3.5 124 149 127 151
90S 140 100 56 90 10 24 50 36 8 20,5 M8 115 165 95 130 140 200 M8 12 3.0 3.5 135 182 152 173
Special Voltage
90L 140 125 56 90 10 24 50 36 8 20,5 M8 115 165 95 130 140 200 M8 12 3.0 3.5 135 182 152 173
Motors
100L 160 140 63 100 12 28 60 41 8 24,5 M10 130 215 110 180 160 250 M8 15 3.5 4.0 135 182 176 173
112M 190 140 70 112 12 28 60 41 8 24,5 M10 130 215 110 180 160 250 M8 15 3.5 4.0 162 231 176 225
² Without face or flange, AH shaft dimension is 12mm longer. Specifications are subject to change without notice
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
301
IEC Metric Motors
DC Metric Motors
Motors
Pump
General Specifications:
• Built to IEC 34-1 electrical and mechanical standards
• IEC 63 and smaller frames supplied with an integral B5 Flange or B14 face
Washguard
• IEC 71 frame and larger can be field modified for B3 Rigid Base, B5 Flange,
or B14 face construction using conversion kits
• Tachometer mounting kits available for 71 and 80 frames only
Features:
Duty Motors
• Reversible rotation
• Simple 2-lead connection
• Convenient wiring access
• Tachometer mounting kits available for 71 and 80 frames only
Special Voltage
Motors
HP/kW RPM Frame Catalog Number Price Model Number (lbs) Voltage DC (Inches) Notes
1/12/0.06 3000 56 M1110025.00 √ 435 980.543 5 24 3.3 5.34 S, US, 12, >
Definite
1/12/0.06 1750 56 M1110026.00 √ 490 980.544 6 24 3.4 6.34 S, US, 12, >
1/4/0.18 3000 63 M1130206.00 √ 554 CIM34D30FD2 13 24 11.0 7.75 S, US, □
1/4/0.18 3000 63 M1130296.00 √ 601 CIM34D30FC7 9 24 11.0 7.75 S, US, >
1/4/0.18 1750 63 M1130207.00 √ 633 CIM34D18FD6 13 24 10.0 8.75 S, US, □
1/4/0.18 1750 63 M1130297.00 √ 688 CIM34D18FC10 9 24 10.0 8.75 S, US, >
1/4/0.18 1750 71 098065.00 √ 759 CI42D17FT6 19 24 11.0 10.77 S, US
Brake Motors
302
IEC Metric Motors
DC Metric Motors
Motors
Pump
Low Voltage Commercial Duty Metric (IEC) Frame Motors
Washguard
Features:
Motors
• Specially designed low voltage DC for use in OEM applications
• Combination of features and low cost make these ideal for many uses
• IP44(TENV) enclosure
• Dedicated B14 face mount
• Rated S1 for continuous duty
Duty Motors
Agricultural
12, 24 & 90 Volt - TENV - B14 Mount
Full Stock App. F.L.
Load IEC List Wgt. DC Amps
HP RPM Frame Catalog Number Price Model Number (lbs) Voltage DC Notes
1/15 3000 56 980.159 √ 242 980.159 2.3 12 6.4 S, US
1/15 3000 56 980.143 √ 222 980.143 2.3 24 3.2 S, US
HVAC / Fan
1/15 3000 56 980.549 √ 212 980.549 2.3 90 0.8 S, US
Motors
1/8 3000 56 970.600 √ 255 970.600 3.0 12 12.0 S, US
1/8 3000 56 970.601 √ 255 970.601 3.0 24 5.3 S, US
1/8 3000 56 970.576 √ 255 970.576 3.0 90 1.2 S, US
1/6 3000 56 970.620 √ 277 970.620 3.5 12 13.1 S, US
1/6 3000 56 970.621 √ 277 970.621 3.5 24 6.8 S, US
1/6 3000 56 970.577 √ 264 970.577 3.5 90 1.6 S, US
Special Voltage
Motors
Note listing on inside back flap
Specifications are subject to change without notice
Purpose Motors
these solutions. To know the product is one thing—understanding the technical relationships with NEMA®
motors is another. We are confident that the formulas below will help you when specifying a LEESON
Definite
Passport Series IEC motor.
Brake Motors
FULL LOAD TORQUE Full Load Torque: Example: Full Load Torque
AND HORSEPOWER FL TRQ = (HP * 5252) / RPM Motor: 50HP, 1800 RPM
(50 * 5252) / 1800 = 145.9 ft-lbs
Horsepower:
HP = (TRQ * FL RPM) / 5252
AND 3-PHASE KVA = √3 * V * FLA / 1000 Motor: 93kW (125HP), 95.4% Efficiency, 86.0% PF
FULL LOAD AMPS (746 * 125) / (460 * .954 * .86 * 1.73205) = 143
3-Phase FLA:
FLA = (746 * HP) / (Volts * Eff. * PF * √3)
303
Motors DC Motors
Pump
Washguard
Motors
• NEMA® DC, explosion proof, Sub-FHP, washdown, IEC and low voltage motors available
• Permanent magnet designs
• PWM or SCR rated and low voltage input voltage designs
Duty Motors
Agricultural
Applications:
DC motors are typically used in applications requiring motor speed adjustment, constant torque
throughout the speed range and reversing capabilities. Applications include: pumps, conveyors,
Special Voltage
turntables, textile machinery, treadmills, reeling equipment, sports equipment and medical
Motors
equipment.
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
Motors
Pump
Mechanical / Electrical Features:
• Brush holder design provides easy access • Permanently lubricated sealed bearings
to brushes
• LEESON® SCR controls available to power
Washguard
• Large oversized brushes assure long brush
Motors
motors
life
• Higher HP and speed achievable using
• Removable bolt-on base PWM type DC controls
• NEMA® C face designs • UL and CSA listed
• 115 or 230 volt input power ratings – 90 / • Meets NEMA MG1 standards
Duty Motors
Agricultural
180 volt output
• Dynamically balanced armatures
• Capable of dynamic braking
• 30:1 constant torque operation
• PWM or SCR type controller rated
• High starting torque
HVAC / Fan
Motors
Special Voltage
Motors
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
Stock
Full Load NEMA Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/4 1750 SS56C 098002.00 √ 747 42D17FK2 19 90 115 2.5 10.81 S, US
1/4 1750 SS56C 098003.00 √ 747 42D17FK3 22 180 230 1.4 11.31 S, US
1/3 1750 SS56C 098004.00 √ 792 42D17FK4 23 90 115 3.5 11.31 S, US
Duty Motors
Agricultural
1/3 1750 SS56C 098005.00 √ 792 42D17FK5 23 180 230 1.7 11.31 S, US
1/3 1140 S56C 109098.00 C/A 971 4D11FK5 32 90 115 3.5 12.81 S, US
1/2 2500 SS56C 098006.00 √ 792 42D28FK1 22 90 115 5.0 10.81 S, US
1/2 2500 SS56C 098007.00 √ 792 42D28FK2 22 180 230 2.5 10.81 S, US
1/2 1750 SS56C 098000.00 √ 880 42D17FK1 26 90 115 5.0 11.81 S, US
1/2 1750 S56C 108014.00 √ 925 4D17FK1 29 90 115 5.0 12.82 S, US
1/2 1750 SS56C 098008.00 √ 880 42D17FK6 25 180 230 2.5 11.81 S, US
1/2 1750 S56C 108015.00 √ 925 4D17FK2 30 180 230 2.5 12.82 S, US
HVAC / Fan
Motors
3/4 1750 S56C 108019.00 √ 1,126 4D17FK4 35 180 230 3.8 13.82 S, US
3/4 1140 S56C 109100.00 √ 1,379 4D11FK7 49 90 115 7.5 15.82 S, US
1 2500 S56C 108020.00 √ 1,070 4D28FK5 34 90 115 10.0 13.32 S, US
1 2500 S56C 108021.00 √ 1,070 4D28FK6 38 180 230 5.0 13.82 S, US
1 1750 S56C 108022.00 √ 1,310 4D17FK5 47 90 115 10.0 14.82 S, US
Purpose Motors
1 1⁄2 2500 S56C 108265.00 √ 1,584 4D28FK11 43 180 230 7.5 15.32 S, US
1 1⁄2 1750 S56C 108092.00 √ 1,635 4D17FK10 53 180 230 7.6 16.82 S, US
1 1⁄2 1750 S56/145TC 108262.00 √ 1,635 4D17FK19 54 180 230 7.6 17.39 S, US, 8
1 1⁄2 1750 145TC 128000.00 √ 2,483 C145D17FK2 70 180 230 7.5 18.34 S, US
2 2500 S56/145TC 108266.00 √ 2,483 4D28FK12 51 180 230 8.6 17.89 S, US, 8
2 1750 145TC 128010.00 √ 2,965 C145D17FK3 83 180 230 9.5 19.34 S, US
Brake Motors
2 1750 182/145TC 128001.00 √ 2,965 C182D17FK3 84 180 230 9.5 19.34 S, US, 61
3 1750 182/145TC 108502.00 √ 4,128 182D17FK2 88 180 230 14.0 21.75 S, US, 61
If base is removed, do not reinstall bolts without using washers Note listing on inside back flap
to compensate for thickness of base. Specifications are subject to change without notice
C/A - Check availability
IEC Motors
DC Motors
Motors
Pump
TEFC - SCR Rated 90 & 180 Volts
Washguard
NEMA 56C - C Face Less Base
Motors
App. Control F.L. “C”
Stock
Full Load NEMA Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/4 1750 SS56C 098377.00 √ 720 42D17FC29 19 90 115 2.5 10.81 S, US
1/3 1750 SS56C 098378.00 √ 767 42D17FC30 23 90 115 3.5 11.31 S, US
1/2 1750 SS56C 098379.00 √ 855 42D17FC31 29 90 115 5.0 11.81 S, US
Duty Motors
Agricultural
3/4 1750 SS56C 098380.00 √ 1,044 42D17FC32 38 90 115 7.6 13.81 S, US
1 1750 S56C 109096.00 √ 1,280 4D17FC42 47 90 115 10.0 14.82 S, US
1 1750 S56C 109097.00 √ 1,280 4D17FC43 39 180 230 5.0 14.82 S, US
No tapped holes provided for attaching a bolt-on base. Note listing on inside back flap
Specifications are subject to change without notice
HVAC / Fan
Motors
Tachometer kit includes all necessary hardware needed to mount on stock TEFC SCR motors. Consists
of machined cast fan cover, coupling and hardware. Does not include tachometer. Tach adapter kit is not
suitable for catalog number 108502.00.
Special Voltage
Tachometer Mounting Kits For DC Motors
Motors
App.
Tachometer NEMA IEC Catalog List Wgt.
Type Frame Frame Number Price (lbs)
SS56 71 175156.00 348 5
GE® 5PY Series
56/145 90 175158.00 715 5
Purpose Motors
Servo-tek® SS56 71 175157.00 398 8
SA740 Series 56/145 90 175159.00 815 8
Definite
No tachometer mounting kit available for S56C motors
Specifications are subject to change without notice
Motors with S56C or SS56C frame sizes may be DC motors in NEMA S56C frame may be
converted to 42/48 C face using the following: converted to 48 base using the following:
Brake Motors
Modification Kits
List List
Frame Catalog Number Price Frame Catalog Number Price
S56C 175080.00* 46 S56C 175082.00* 59
S56C 175802.00*† 59
* Addition of base kit will result in non-NEMA BA dimension of 2 3/4”.
IEC Motors
Addition of C face kit will result in conduit box located at 1 o’clock * Additon of base kit will result in non-NEMA BA dimension of
facing lead end. 2 3/4. Addition of C face kit will result in conduit box
† For S56 frame endshield mounted brush cover motors located at 1 o’clock facing lead end
Specifications are subject to change without notice † For S56 frame endshield mounted brush cover motors
Specifications are subject to change without notice
DC Motors
Application Notes:
These motors must be applied in accordance with the National
Electrical Code, Article #500. For a listing of explosive agents,
consult NFPA Publication 497M.
Washguard
Motors
General Specifications:
• Approved for application in hazardous environments where
certain explosive gases or materials are present
Features:
Duty Motors
Full Load NEMA Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/3 1750 S56C 118015.00 √ 2,556 C6D17EK1 27 90 115 3.5 13.41 S, US
1/2 1750 S56C 118016.00 √ 2,886 C6D17EK2 30 90 115 4.7 14.41 S, US
1/2 1750 S56C 118017.00 √ 2,886 C6D17EK3 32 180 230 2.5 14.41 S, US
Purpose Motors
3/4 1750 S56C 118019.00 √ 3,576 C6D17EK5 36 180 230 3.3 16.41 S, US
• Division 1 and 2, Class I (Groups C and D), Class ll (Groups F and G) and Class lll
• Removable base
• Class H insulation
• Optional conduit box available - use kit 175026.00
App. “C”
Stock
Full Load NEMA Catalog List Wgt. Arm. Volts F.L. Amps Torque Dim.
HP RPM Frame Number Price Model Number (lbs) DC DC (lb-in) (Inches) Notes
1/3 1750 56C 118054.00 √ 3,767 C6D17EK6 19 12 28.0 12.0 10.38 S, US
1/3 1750 56C 118055.00 √ 3,767 C6D17EK7 24 24 13.4 12.0 10.38 S, US
3/4 1750 56C 118056.00 √ 4,775 C6D17EK8 33 24 28.2 27.0 13.38 S, US
DC Motors
308
DC Motors
NEMA Frame - Washguard® Duty Motor - 90 & 180 Volts
Motors
Pump
General Specifications:
• Extended life in wet, high humidity applications - IP55
• Design repels water from entering motor
• Internal components protected against rust and corrosion
• Frame, base, endshields, armature and interior components
Washguard
protected by enamel and polyester compounds of outstanding
Motors
adhesion and resistance to moisture, acids, alkalies and oil
Features:
• 303 stainless steel shaft resists corrosion • 304 stainless steel conduit box cover and fan
• Lubricated spring loaded contact seals prevent cover
moisture from entering the motor
Duty Motors
Agricultural
• Re-positionable drain plugs for use in
• Patented “V” ring Forsheda® seal deflects water multiple mounting positions
• Double sealed, oversize bearings with high temp lubricant • Nylon seals at bolt heads for superior sealing
• Exterior and interior components protected against • Machined fits throughout
moisture, acids, alkalies and oil • Stainless steel data plate
• Cast conduit box for superior sealing includes: • Chemically inert, static free fan with positive
- Threaded entrance mounting ensures it won’t move
HVAC / Fan
- Drain holes
Motors
• Stainless steel fan guard
- Nitrile gaskets • USDA approved white epoxy finish
Special Voltage
Stock
Full Load NEMA Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
Motors
1/4 1750 S56C 108423.00 √ 957 C4D17VK9 23 90 115 2.7 10.69 S, US
1/4 1750 S56C 098375.00 C/A 957 C42D17VK1 21 180 230 1.4 10.22 S, US
1/3 1750 S56C 108424.00 √ 1,012 C4D17VK10 26 90 115 3.5 11.69 S, US
1/3 1750 S56C 098376.00 C/A 1,012 C42D17VK2 22 180 230 1.7 10.22 S, US
1/2 1750 S56C 108226.00 √ 1,136 C4D17VK1 38 90 115 4.9 13.69 S, US
Purpose Motors
1/2 1750 S56C 108227.00 √ 1,136 C4D17VK2 43 180 230 2.4 13.69 S, US
3/4 1750 S56C 108228.00 √ 1,379 C4D17VK3 53 90 115 7.0 15.69 S, US
Definite
3/4 1750 S56C 108229.00 √ 1,379 C4D17VK4 50 180 230 3.5 15.69 S, US
1 1750 S56C 108230.00 √ 1,679 C4D17WK1 45 90 115 10.0 15.81 S, US
1 1750 S56C 108231.00 √ 1,679 C4D17WK2 42 180 230 5.0 14.81 S, US
1 1⁄2 1750 S56C 108232.00 √ 2,146 C4D17WK3 50 180 230 7.6 15.81 S, US
Brake Motors
Washguard® - IEC® Frame - TENV IP55
180 Volts - TENV - B5 Flange With Removable Base
App. Control F.L. “C”
Stock
Full Load IEC Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
IEC Motors
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/2 - .37 1750 71 098040.00 C/A 1,004 42D17VD1 22 180 230 2.5 10.69 S, US
3/4 - .55 1750 80 108407.00 D 1,361 4D17VD1 52 180 230 3.5 16.02 S, US
If base is removed, do not reinstall bolts without using washers to compensate for Note listing on inside back flap
the thickness of base. These Washguard motors are modular design but stocked Specifications are subject to change without notice
with B5 flange and B3 foot. The foot is removable. The B5 flange can be replaced
with a B14 face or other diameter B5 flanges noted on page 314.
DC Motors
General Specifications:
Precision subfractional horsepower DC permanent magnet motors
designed for use with full wave non-filtered SCR controls for adjustable
speed applications requiring dynamic braking and constant torque
Washguard
Features:
• Compact, space saving design
• Ball bearing construction
• Long life brushes
• External access to brushes allows for easy replacement further
Duty Motors
Agricultural
• Reversible rotation
Motors
1/10 1750 31CS M1120041.00 √ 439 CM31D17NZ7 7 180 230 0.6 S, US, 12
Definite
1/6 1750 31GS M1120043.00 √ 480 CM31D17NZ9 11 180 230 0.9 S, US, 12
1/6 1750 34E56C M1130054.00 √ 502 CM34D17NC6 11 90 115 1.7 S, US, 12
1/6 1750 34E56C M1130119.00 C/A 502 CM34D17NC9 11 180 230 0.9 S, US, 12
1/4 3500 31GS M1120062.00 √ 501 CM31D35NZ5 9 90 115 2.6 S, US, 12
1/4 1750 34G56C M1130055.00 √ 520 CM34D17FC2 13 90 115 2.7 S, US, 13
1/4 1750 34G56C M1130120.00 √ 520 CM34D17FC4 13 180 230 1.3 S, US, 13
25 frame motors have provisions for an optional conduit box catalog Note listing on inside back flap
IEC Motors
number M1760000.00, see page 356. Specifications are subject to change without notice
C/A = Check Availability
Note 12 - TENV
Note 13 - TEFC
DC Motors
310
DC Motors
Sub-FHP IP55 Washguard® Motors
Motors
Pump
Application Notes:
LEESON® Washguard® motors are designed for extended life in applications requiring regular washdown
or otherwise wet environments. Washguard motors retard the entrance of water. Extra protection for
the motor’s interior prevents rust and corrosion build-up and releases trapped moisture to ensure a
longer life than possible with a standard motor.
Washguard
Motors
General Specifications:
Precision subfractional horsepower DC permanent magnet motors. Designed for use with fullwave
nonfiltered SCR controls or battery supplied low voltage for adjustable speed applications requiring
constant torque throughout the speed range.
Duty Motors
Agricultural
Features:
• 303 Stainless steel shaft resists corrosion
• Lubricated spring loaded contact seals prevent moisture from entering the motor
• Double sealed, oversize bearings with high temp lubricant
• Exterior and interior components protected against moisture, acids, alkalies and oil
• Cast conduit box for superior sealing includes:
HVAC / Fan
- Threaded entrance
Motors
- Drain holes
- Nitrile gaskets
• 304 stainless steel conduit box cover
• Stainless steel hardware
• USDA approved white epoxy finish
Special Voltage
• Nylon seals at bolt heads for superior sealing
Motors
• O-ring sealed brush covers
Purpose Motors
App. Control F.L.
Stock
Definite
HP RPM Frame Catalog Number Price Model Number (lbs) DC Input DC Notes
1/8 1750 31S M1120181.00 √ 595 CM31D17V21 11 90 115 1.5 S, US
1/6 1750 31S M1120183.00 √ 604 CM31D17V23 11 90 115 1.9 S, US
1/4 2500 32F42CZ M1120185.00* √ 658 CM32D25VC1 13 90 115 1.9 S, US
* Motor M1120185.00 is a C Face mount Note listing on inside back flap
Specifications are subject to change without notice
Brake Motors
IEC Motors
311
DC Motors
METRIC (IEC®) Frame - SCR Rated - IP54
Motors
Pump
Application Notes:
Please note that one or more of the mounting kits must be used
with IEC motors of these frame sizes. See listing on next page for
B5 flange and B14 face kits. B3 rigid base kits are listed below.
Washguard
Motors
General Specifications:
• Built to IEC 34-1 electrical and mechanical standards
• IEC 63 and smaller frames supplied with an integral B5 flange or B14 face
• Optional B3 rigid base kit available
• IEC 71 frame and larger can be field modified for B3 rigid base, B5 flange, or
Duty Motors
Agricultural
Features:
• Cast aluminum conduit box
• Terminal board provided for connections
• All metric fasteners
HVAC / Fan
Motors
Full Load Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
KW/HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
0.06/1/12 1800 56 M1130146.00 C/A 533 CIM34D18ND1 8 180 230 0.5 6.24 S, US, 12
0.09/1/8 3000 56 M1130150.00 √ 533 CIM34D30ND1 9 180 230 0.7 6.74 S, US, 12
0.09/1/8 1800 56 M1130147.00 √ 571 CIM34D18ND2 10 180 230 0.7 7.55 S, US, 12
0.12/1/6 3000 56 M1130151.00 √ 553 CIM34D30ND2 9 180 230 0.9 7.55 S, US, 12
Brake Motors
0.12/1/6 1800 63 M1130148.00 √ 653 CIM34D18FD1 7 180 230 0.9 8.30 S, US, 13
0.18/1/4 3000 63 M1130152.00 √ 604 CIM34D30ND3 11 180 230 1.3 8.78 S, US, 12
0.18/1/4 1800 63 M1130149.00 √ 702 CIM34D18FD2 13 180 230 1.3 9.50 S, US, 13
0.25/1/3 3000 63 M1130153.00 √ 669 CIM34D30FD1 11 180 230 1.7 9.50 S, US, 13
These motors have accommodations for B3 base Note listing on inside back flap
mountings with the kits listed on page 314. Specifications are subject to change without notice
C/A - Check availability
IEC Motors
Note 12 - TENV
Note 13 - TEFC
DC Motors
312
IEC is believed to be the trademark of nternational Electrotechnical Com-
mission, and is not owned or controlled by Regal Beloit Corporation.
DC Motors
METRIC (IEC®) Frame - SCR Rated - IP54
Motors
Pump
Washguard
Motors
180 volts - Totally Enclosed - B14 Flange
App. Control F.L. “C”
Stock
Full Load Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
KW/HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
0.06/1/12 3000 56 M1110024.00 √ 477 980,542 6 180 230 0.4 6.34 S, US, 12
Duty Motors
Agricultural
0.06/1/12 1800 56 M1130136.00 √ 578 CIM34D18NC5 8 180 230 0.5 6.24 S, US, 12
0.09/1/8 3000 56 M1130140.00 √ 533 CIM34D30NC1 9 180 230 0.7 6.74 S, US, 12
0.09/1/8 1800 56 M1130137.00 √ 620 CIM34D18NC6 14 180 230 0.7 7.55 S, US, 12
0.12/1/6 3000 56 M1130141.00 √ 600 CIM34D30NC2 10 180 230 0.9 7.55 S, US, 12
0.12/1/6 1800 63 M1130138.00 √ 653 CIM34D18FC1 8 180 230 0.9 8.30 S, US, 13
0.18/1/4 3000 63 M1130142.00 √ 604 CIM34D30NC3 10 180 230 1.3 8.78 S, US, 12
0.18/1/4 1800 63 M1130139.00 √ 702 CIM34D18FC2 10 180 230 1.3 9.50 S, US, 13
HVAC / Fan
0.25/1/3 3000 63 M1130143.00 √ 669 CIM34D30FC1 10 180 230 1.7 9.50 S, US, 13
Motors
Except for M1110024.00, these motors have accommodations for Note listing on inside back flap
B3 base mountings with kits - see page 314. Specifications are subject to change without notice
Note 12 - TENV
Note 13 - TEFC
Special Voltage
Motors
Purpose Motors
Definite
TEFC - SCR Rated 180 Volts - Round Body
App. Control F.L. “C”
Stock
Full Load IEC Catalog List Wgt. Arm. Volts Volts AC Amps Dim.
KW/HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
0.25/1/3 1800 71 098014.00 √ 699 42D17FT1 23 180 230 1.7 11.28 S, US
0.37/1/2 3000 71 098016.00 √ 769 42D34FT1 21 180 230 2.5 10.78 S, US
Brake Motors
0.37/1/2 1800 71 098015.00 √ 792 42D17FT2 26 180 230 2.5 11.78 S, US
0.55/3/4 3000 71 098017.00 √ 858 42D34FT2 24 180 230 3.6 11.78 S, US
0.55/3/4 1800 80 108369.00 √ 981 4D17FT1 34 180 230 3.5 14.64 S, US
0.75/1 3000 80 108372.00 √ 981 4D34FT1 45 180 230 4.9 14.64 S, US
0.75/1 1800 80 108370.00 √ 1,210 4D17FT2 48 180 230 4.6 17.14 S, US
1.1/11/2 3000 80 108373.00 √ 1,084 4D34FT2 47 180 230 7.1 16.14 S, US
1.1/11/2 1800 80 108371.00 √ 1,597 4D17FT3 52 180 230 7.0 17.14 S, US
1.1/11/2 1800 90L 118007.00 √ 2,379 CI6D17FT1 64 180 230 7.5 18.97 S, US
IEC Motors
1.5/2 3000 90L 118009.00 √ 2,583 CI6D34FT1 72 180 230 10.0 18.47 S, US
1.5/2 1800 90L 118008.00 √ 2,854 CI6D17FT2 84 180 230 9.5 20.47 S, US
2.2/3 3000 90L 118010.00 √ 3,099 CI6D34FT2 82 180 230 16.0 19.47 S, US
2.2/3 1800 112M 118014.00 √ 3,984 CI6D17FK1 90 180 230 14.0 21.79 S, US
IMPORTANT: These round body motors require either a B3 rigid base, B14 Note listing on inside back flap
face or B5 flange kit - see page 314. Catalog number 118014.00 comes Specifications are subject to change without notice
complete with IEC 112 B14 face and B3 foot; shaft diameter is 24mm.
DC Motors
313
IEC is believed to be the trademark of nternational Electrotechnical Com-
mission, and is not owned or controlled by Regal Beloit Corporation.
DC Motors
Metric (IEC®) Frame - SCR Rated
Motors
Pump
IEC Catalog
Frame Number List Price
56 175142.00 87
63 175143.00 80
71 175144.00 88
80 175145.00 95
Duty Motors
Agricultural
80 175784.00† 95
90 175146.00 66
† For endshield mounted brush cover motors
Flange Kits
Basic motor frame
HVAC / Fan
Flange and face kits for DC metric (IEC) frame motors. face fixing
An advantage of our modular design concept is the possible
B5
use of a different diameter B5 flange or B14 face than is Flange
normally assigned to a motor by IEC dimensional standards.
This flexibility makes it possible to accommodate a wide
variety of gear reducers, pumps and similar close coupled
Special Voltage
314
IEC is believed to be the trademark of nternational Electrotechnical Com-
mission, and is not owned or controlled by Regal Beloit Corporation.
DC Motors
Metric (IEC®) Frame - SCR Rated
Motors
Pump
Washguard
Motors
Duty Motors
Agricultural
IEC Frame Dimensions (Millimeters)
IEC Mounting Shaft B14 Face/B5 Flange General
Frame 2E 2F BA D H U AHG KEY S R TAP AJ AK BD BF BB AB XP B O
HVAC / Fan
Motors
56 90 71 36 56 6 9 20 15 3 7.0 M3 65 50 80 M5 2.5 83 96 90 99
100 80 120 7 2.5
63 100 80 40 63 7 11 23 19 4 9.0 M4 75 60 90 M5 2.5 116 96 96 108
115 95 140 9 3.0
71 112 90 45 71 7 14 30 26 5 11.5 M5 85 70 105 M6 2.5 114 130 105 132
130 110 160 9 3.5
80 125 100 50 80 10 19 40 33 6 16.0 M6 100 80 120 M6 3.0 124 149 127 151
165 130 200 12 3.5
90S 140 100 56 90 10 24 50 36 8 20.5 M8 115 95 140 M8 3.0 135 182 152 173
165 130 200 12 3.5
Special Voltage
90L 140 125 56 90 10 24 50 36 8 20.5 M8 115 95 140 M8 3.0 135 182 152 173
165 130 200 12 3.5
Motors
100L 160 140 63 100 12 28 60 41 8 24.5 M10 130 110 160 M8 3.5 135 182 176 173
215 180 250 15 4.0
112M 190 140 70 112 12 28 60 41 8 24.5 M10 130 110 160 M8 3.5 162 231 176 225
215 180 250 15 4.0
² Without face or flange, AH shaft dimension is 12mm longer. Specifications are subject to change without notice
Purpose Motors
Definite
Brake Motors
IEC Motors
DC Motors
315
IEC is believed to be the trademark of nternational Electrotechnical Com-
mission, and is not owned or controlled by Regal Beloit Corporation.
DC Motors
NEMA® Frame - Low Voltage 12, 24, 36 & 48 VOLTS
Motors
Pump
General Specifications:
• Low voltage PMDC design suitable for battery, solar powered
or generator supplied low voltage applications
Washguard
Motors
Features:
• Oversized brushes for long life
• External access to brushes allows for easy replacement
further prolonging motor life
• Heavy-duty, stamped steel, bolt on base (removable)
• NEMA® C face mounting flange at no additional cost
Duty Motors
Agricultural
12, 24, 36 & 48 Volts - TENV / TEFC - C Face With Removable Base
Motors
1/2 1800 S56C 108047.00 √ 915 C4D17NK7G 30 12 39.0 11.77 S, US, 12, 15
Definite
1/2 1800 S56C 108051.00 √ 873 C4D17NK10D 32 24 20.0 11.77 S, US, 12, 15
1/2 1800 SS56C 098381.00 √ 831 C42D18FK6A 29 36 13.5 10.81 S, US
1/2 1800 SS56C 098382.00 √ 803 C42D18FK7A 21 48 11.0 10.81 S, US
3/4 1800 S56C 108048.00 √ 1,008 C4D17FK7G 33 12 58.0 13.82 S, US, 35
3/4 1800 S56C 108052.00 √ 914 C4D17FK8D 27 24 29.0 12.82 S, US
1 1800 S56C 108322.00 √ 1,202 C4D17FK28C 37 12 80.0 13.81 S, US, 35
Brake Motors
If base is removed, do not reinstall bolts without using Note listing on inside back flap
washers to compensate for thickness of base. Specifications are subject to change without notice
Note 12 - TENV
Note 15 - Built in conduit box
Note 35 - Terminal studs at 12:00
DC Motors
Motors
Pump
General Specifications:
• Extended life in wet, high humidity applications - IP55
• Design repels water from entering motor
Washguard
Motors
• Internal components protected against rust and corrosion
• Frame, base, end shields, armature and interior components protected by enamel and polyester
compounds of outstanding adhesion and resistance to moisture, acids, alkalies and oil
Features:
• 303 stainless steel shaft resist corrosion
Duty Motors
Agricultural
• Lubricated spring loaded contact seals prevent moisture from entering the motor
• Patented “V” ring Forsheda® seal deflects water
• Double sealed, oversize bearings with high temp lubricant
• Exterior and interior components protected against moisture, acids, alkalies and oil
• TENV designs have built in conduit box. Motor 109301.00 has terminal box. Other TEFC models
utilize watertight terminal posts
HVAC / Fan
• 304 stainless steel conduit box cover and fan cover
Motors
• Re-positionable drain plugs for use in multiple mounting positions
• Nylon seals at bolt heads for superior sealing
• Machined fits throughout
• Stainless steel data plate
• Chemically inert, static free fan on TEFC designs with positive mounting ensures it won’t move
Special Voltage
• Stainless steel fan guard
• USDA approved white epoxy finish
Motors
DC - Low Voltage Rated 12 & 24 Volts - Totally Enclosed
Purpose Motors
IP55 - C Face with Removable Base
Definite
App. Arm. F.L. “C”
Stock
Brake Motors
3/4 1800 S56C 109300.00 √ 1,379 C4D18WK16A 33 12 58.0 13.82 S, US, 13
3/4 1800 S56C 109301.00 √ 1,458 C4D18WK14A 27 24 29.0 12.82 S, US, 13
1 1800 S56C 109302.00 √ 1,679 C4D18WK12C 37 12 80.0 13.81 S, US, 13
1 1800 S56C 109303.00 √ 1,630 C4D18WK13A 34 24 39.0 13.82 S, US, 13
1 1⁄2 1800 S56CZ 109304.00 √ 2,146 C4D18WK15A 52 24 60.0 15.25 S, US, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
IEC Motors
DC Motors
General Specifications:
• Built to IEC® 34-1 electrical and mechanical standards
• IEC 63 and smaller frames supplied with an integral B5 flange or B14 face
• Optional B3 rigid base kit available
Washguard
Motors
• IEC 71 frame and larger can be field modified for B3 rigid base, B5 flange, or
B14 face construction using conversion kits
• Tachometer mounting kits available for 71 frames only
Features:
• Terminal board provided for connections
Duty Motors
Agricultural
Stock
Motors
Pump
General Specifications:
• Low voltage PMDC design suitable for battery, solar powered or
generator supplied low voltage applications
Washguard
Motors
Features:
• Compact, space saving design
• Standard conduit box simplifies connections
• Ball bearing construction
• Long life brushes
• External access to brushes allows for easy replacement further
Duty Motors
Agricultural
prolonging motor life
• High starting torques
• Linear speed torque characteristics throughout the speed range
• Capable of dynamic braking for faster stops
• Reversible rotation
• Simple two lead connection
• Class F insulated with high temperature welded commutators
HVAC / Fan
Motors
12 & 24 Volts - TENV - Square Flange
Special Voltage
App. Arm. F.L.
Motors
Stock
Purpose Motors
1/7 1750 12 13.0 S, US
31ES M1120044.00 √ 490 M31D17NZ10 9
Definite
1/4 3500 24 13.0 S, US
1/6 1750 12 14.0 S, US
31GS M1120046.00 √ 519 M31D17NZ26 8
1/3 3900 24 14.0 S, US
These motors may be operated at 12, 24V, or at intermediate voltages Note listing on inside back flap
between 12 and 24V, within horsepower ranges noted. Specifications are subject to change without notice
Note * - Provision for optional conduit box - M1760000.00
Brake Motors
IEC Motors
DC Motors
319
DC Motors
Low Voltage Commercial Duty Metric (IEC®) Frame Motors
Motors
Pump
Features:
• Specially designed low voltage DC for use in OEM applications
• Combination of features and low cost make these ideal for many uses
• IP44 (TENV) enclosure
Washguard
Motors
Motors
Pump
All-Stainless DC Motors - SCR Rated
Washguard
Motors
TEFC - SCR Rated 90 & 180V - NEMA - C Face With Base
App. Arm. Control F.L. “C”
Stock
Full Load NEMA Catalog List Wgt. Volts Volts AC Amps Dim.
Duty Motors
Agricultural
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/4 1750 S56C 109065.00 √ 1,593 4D17VK24 38 90 115 3.1 11.81 S, US, 12
1/3 1750 S56C 109066.00 √ 1,684 4D17VK25 44 90 115 3.8 12.81 S, US, 12
1/3 1750 S56C 109067.00 √ 1,684 4D17VK26 44 180 230 1.9 12.81 S, US, 12
1/2 1750 S56C 109069.00 √ 1,967 4D17WK9 46 90 115 5.2 13.87 S, US, 13
1/2 1750 S56C 109070.00 √ 1,967 4D17WK10 46 180 230 2.7 13.87 S, US, 13
3/4 1750 S56C 109072.00 √ 2,395 4D17WK13 47 90 115 7.5 15.37 S, US, 13
HVAC / Fan
3/4 1750 S56C 109073.00 √ 2,395 4D17WK14 48 180 230 3.7 15.37 S, US, 13
Motors
1 1750 S56C 109075.00 √ 2,779 4D17WK16 51 90 115 9.5 16.37 S, US, 13
1 1750 S56C 109076.00 √ 2,779 4D17WK17 50 180 230 5.0 16.37 S, US, 13
Base is welded to frame and not removable Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
Special Voltage
Motors
Purpose Motors
Definite
TEFC - SCR Rated 90 & 180V - NEMA - C Face Less Base
App. Arm. Control F.L. “C”
Stock
Full Load NEMA Catalog List Wgt. Volts Volts AC Amps Dim.
HP RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/4 1750 S56C 109078.00 √ 1,555 4D17VC5 38 90 115 3.1 11.81 S, US, 12
1/3 1750 S56C 109079.00 √ 1,647 4D17VC6 44 90 115 3.8 12.81 S, US, 13
Brake Motors
1/3 1750 S56C 109080.00 √ 1,647 4D17VC7 44 180 230 1.9 12.81 S, US, 13
1/2 1750 S56C 109082.00 √ 1,932 4D17WC2 46 90 115 5.2 13.87 S, US, 13
1/2 1750 S56C 109083.00 √ 1,932 4D17WC3 46 180 230 2.7 13.87 S, US, 13
3/4 1750 S56C 109085.00 √ 2,358 4D17WC5 47 90 115 7.5 15.37 S, US, 13
3/4 1750 S56C 109086.00 C/A 2,358 4D17WC6 48 180 230 3.7 15.37 S, US, 13
1 1750 S56C 109088.00 √ 2,744 4D17WC8 51 90 115 9.5 16.37 S, US, 13
1 1750 S56C 109089.00 √ 2,744 4D17WC9 50 180 230 5.0 16.37 S, US, 13
IEC Motors
TEFC - SCR Rated 90 & 180V - All Stainless Steel - C Face With Base
App. Arm. Control F.L. “C”
Stock
Full Load IEC Catalog List Wgt. Volts Volts AC Amps Dim.
HP/KW RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
Washguard
Motors
1/3 - 0.25 1750 80D 109068.00 √ 1,684 4D17VK27 44 180 230 1.9 12.81 S, US, 12
1/2 - 0.37 1750 80D 109071.00 √ 1,967 4D17WK11 46 180 230 2.7 13.87 S, US, 13
3/4 - 0.55 1750 80D 109074.00 √ 2,395 4D17WK15 48 180 230 3.7 15.37 S, US, 13
1 - 0.75 1750 80D 109077.00 √ 2,779 4D17WK18 50 180 230 5.0 16.37 S, US, 13
Base is welded to frame and not removable Note listing on inside back flap
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
Duty Motors
Agricultural
TEFC - SCR Rated 90 & 180V - Metric (IEC) - All-Stainless Steel - C Face Less Base
App. Arm. Control F.L. “C”
Stock
Full Load IEC Catalog List Wgt. Volts Volts AC Amps Dim.
HP/KW RPM Frame Number Price Model Number (lbs) DC Input DC (Inches) Notes
1/3 - 0.25 1750 80D 109081.00 √ 1,647 4D17VC8 44 180 230 1.9 12.81 S, US, 12
1/2 - 0.37 1750 80D 109084.00 √ 1,932 4D17WC4 46 180 230 2.7 13.87 S, US, 13
HVAC / Fan
3/4 - 0.55 1750 80D 109087.00 √ 2,358 4D17WC7 48 180 230 3.7 15.37 S, US, 13
Motors
1 - 0.75 1750 80D 109090.00 √ 2,744 4D17WC10 50 180 230 5.0 16.37 S, US, 13
Note 12 - TENV Note listing on inside back flap
Note 13 - TEFC Specifications are subject to change without notice
Regal’s modular design concept of other metric DC motors has been applied to the all-stainless metric
motors. Any flange or face kit can mount on any motor. This allows the greatest flexibility from the
smallest inventory of motors.
AJ
Definite
BD AK BF Bolt
Catalog List Flange Register Hole Circle
IEC Frame Number Price App. Wgt. (lbs) Dia. (mm) (mm) (mm) (mm)
71 175593.00 212 2 110 9 130 160
80 175594.00 255 3 130 12 165 200
90S/90L 175594.00 255 3 130 12 165 200
100L/112M 175595.00 399 5 180 15 215 250
Brake Motors
IEC Frame Number Price App. Wgt. (lbs) Dia. (mm) (mm) (mm) (mm)
71 175596.00 175 1 70 6 85 105
80 175597.00 161 1 80 6 100 120
90S/90L 175598.00 439 1 95 6 115 140
100L/112M 175599.00 399 2 110 6 130 160
DC Motors
Motors
Pump
Washguard
Failure to adhere to the instructions listed immediately below could result in death or serious injury.
Motors
1. Disconnect power to the motor before performing service or maintenance.
2. Discharge all capacitors before servicing motor.
3. Keep hands and clothing away from moving parts.
4. Check that required safety guards are in place before starting equipment.
Duty Motors
Agricultural
Problem Likely Causes What To Do
Motor fails to start upon initial installation. Motor is miswired. Verify that the motor is wired correctly.
No output power from controller. Measure voltage coming from the controller.
Motor damaged and the fan guard is contacting Replace fan guard.
HVAC / Fan
the cooling fan.
Motors
Motor damaged and the armature is rubbing Disassemble motor and see if the armature can
against the magnets. be realigned by reassembly. Motor may have to
be replaced.
Motor runs in the wrong direction. Incorrect wiring. Interchange the two motor leads.
Motor runs ok but has a clicking noise. Suspect a burr on the commutator. Stone the armature commutator with a commuta-
tor stone to remove burr.
Special Voltage
Motor has been running, then fails to start. Fuse or circuit breaker is tripped Replace the fuse or reset the breaker
Motors
Armature is shorted or went to ground. Motor may Disassemble motor and inspect the armature for a
make a humming noise and the circuit breaker or burnt coil. Inspect the commutator for burnt bars.
fuse will trip. If this condition exists, the motor needs to be
replaced. To test, set your OHM to the RX1 scale,
touch probes to bars 180 degrees apart all around
the commutator. The reading should be equal.
The brushes may be worn down too far and no Inspect the brushes to make sure that they are
Purpose Motors
longer make contact with the commutator. still making contact with the commutator. Refer to
manufacturer’s recommended brush length chart.
Definite
Motor runs but loses power. Load has increased. Verify the load has not changed. Measure the amp
draw of motor against the full load amp rating of
the motor. If the amp draw is higher than rating,
motor is undersized for application.
Motor controller not properly set. Check controller manual for adjustments. The
torque and/or IR compensation settings may need
adjustment.
Brake Motors
Motor may have an open connection. Inspect the armature for an open connection.
Brushes may not be seated properly or worn Verify that the brushes are properly seated and
beyond their useful length. measure their length against the recommended
brush length chart.
Motor takes too long to accelerate. Motor controller not properly set. The accel trim pot of the controller should be
adjusted.
Brushes are worn. Verify brush length.
IEC Motors
Bearings may be defective. Inspect bearings for proper service. Noisy or rough
bearings should be replaced.
DC Motors
323
Gearmotors Gearmotors
Quick Reference – Stock Sub-FHP Gearmotors
DC SCR 90V
Mods / Factory
and
Options
Page 352
Single Phase DC SCR 90 & 180V
Right-Angle 115/230V 5-135 In-Lbs
Worm Type 14-113 In-Lbs Output Torque
10 & 13 Series Output Torque Low Voltage (12V)
Gearmotors Page 354 25-135 In-Lbs torque
Page 336
Gearmotors
Quick Reference – Stock Sub-FHP Washguard® Gearmotors
AC / DC Controls
Output Torque
Gearmotors 44-353 In-Lbs
Page 340
Accessories / Kits
PE350 Series Output Torque
Gearmotors 25-341 In-Lbs
Page 342
Mods / Factory
Right-Angle Low Voltage (12V)
Options
13 Series Output Torque
Gearmotors 50-135 In-Lbs
Page 344
X-Ref / Index
Three Phase
P240 Series Washdown Duty
Gearmotors 60-391 In-Lbs
Output Torque
Page 349
Tech Information
AC – Single Phase &
Right-Angle Three Phase
Worm Type Washdown Duty
10 & 13 Series 23-220 In-Lbs
Gearmotors Output Torque
Warnings/Cautions
Page 355
LEESON ABB® (Baldor®) Bison® Bodine® LEESON ABB® (Baldor®) Bison® Bodine®
Catalog # Gearmotor Gearmotor Gaermotor Catalog # Gearmotor Gearmotor Gaermotor
M1125084.00 GC24302 - 0488 M1145033.00 GCP25054 016-226-6028 1021
M1125083.00 GC24306 - 0490 M1145034.00 GCP25056 016-226-6019 1019
M1125081.00 GC24310 - 0491 M1145035.00 GCP25060 016-226-6011 -
Warnings/Cautions
326
Gearmotors
DESIGNED FOR HEAVY-DUTY SERVICE
An industrial strength gearing and motor package,
designed for reliability and long life in the
toughest applications.
AC / DC Controls
PRESSURE-CAST ALUMINUM GEARBOXES
• Machined and integrally fitted to the motor
• Precision gearing results in minimum noise,
maximum load capacity
• Parallel shaft models combine strength of
bronze worm wheels with steel worm shafts
Accessories / Kits
LEESON ABB® (Baldor®) Bison® Bodine® LEESON ABB® (Baldor®) Bison® Bodine®
Catalog # Gearmotor Gearmotor Gaermotor Catalog # Gearmotor Gearmotor Gaermotor
107034.00 GMP3342 017-482-0029 - M1135115.00 GPP7461 - -
M1115019.00 GP233003 - 0098 M1135107.00 GPP7462 011-348-7102 5048
Mods / Factory
M1115020.00 GP233007 - 0096 M1135150.00 GPP7470 - -
Options
M1135038.00 GP7402 - 6144 M1135149.00 GPP7471 - -
M1135069.00 GP7403 - - M1135148.00 GPP7472 - -
M1135042.00 GP7405 - 4138 M1135147.00 GPP7473 - -
M1135043.00 GP7407 - 4137 M1135146.00 GPP7474 - -
M1135063.00 GP7427 - - M1135145.00 GPP7475 - -
M1125004.00 GPP12503 011-190-0019 0159 M1135143.00 GPP7476 - -
X-Ref / Index
M1125073.00 GPP12544 011-336-2019 1060 M1135141.00 GPP7477 - -
M1125072.00 GPP12545 011-336-2028 1062 M1135140.00 GPP7478 - -
M1125070.00 GPP12547 011-336-2060 1066 M1135139.00 GPP7479 - -
M1115001.00 GPP231108 011-190-0186 0163 M1145131.00 IDGM2500 - -
M1115002.00 GPP231109 011-190-0362 0199 M1145130.00 IDGM2501 - -
Tech Information
M1115000.00 GPP232110 011-190-0096 0162 M1145129.00 IDGM2503 - -
M1115028.00 GPP233111 011-336-1030 - M1145128.00 IDGM2506 - -
M1115027.00 GPP233112 011-336-1053 - M1145127.00 IDGM2508 - -
M1125048.00 GPP233120 - - 096070.00 IDGMP2500 - -
M1125036.00 GPP233121 - - 096069.00 IDGMP2501 - -
M1115026.00 GPP233140 011-336-1091 1070 096068.00 IDGMP2503 - -
Warnings/Cautions
M1115025.00 GPP233141 011-336-1208 1072 096067.00 IDGMP2505 - -
M1135113.00 GPP7450 - 5040 092114.00 L3353 - -
M1135116.00 GPP7451 - 5041 092116.00 L3355 - -
M1135112.00 GPP7452 - 5042 092015.00 M3353 - -
M1135111.00 GPP7453 - 5043 092015.00 M3355 - -
M1135114.00 GPP7454 - 5044 192025.00 MVM3458D - -
M1135110.00 GPP7455 011-348-7029 5045 192037.00 MVM3460C - -
M1135108.00 GPP7456 011-348-7041 5046 192038.00 MVM3461C - -
M1135117.00 GPP7457 5047 192035.00 MVM3461D - -
M1135107.00 GPP7458 011-348-7102 5048 192047.00 MVM3463C - -
M1135106.00 GPP7459 011-348-7215 5049 M1130139.00 VP7424-14 - -
M1135109.00 GPP7460 011-348-7034 - M1130149.00 VP7424D - -
327
Gearmotors Gearmotors
Parallel Shaft - PZ Series - DC
Features:
• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
Mods / Factory
Application Notes:
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
X-Ref / Index
lubricant into the motor should the motor shaft seal fail
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as
an SCR control should be used to prevent damage. This issue is even more critical for low voltage
motors, typically no controller is used since motor is connected directly to a battery, so some type of
current limit or fusing should be considered
• Overhung load capacities shown are at center of output shaft
Tech Information
• Model PZ gearmotors have the same mounting dimensions as Bodine® model D and Z, Baldor®,
Bison® 100 gearmotors, and a number of Dayton® gearmotors
• Bodine/Baldor/Bison/Dayton direct interchange
Warnings/Cautions
Gearmotors
Parallel Shaft - PZ Series - DC
AC / DC Controls
90 & 180 Volts - TENV - PZ Series
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) P X XL XH Notes
4 40 1⁄40 M1115002.00 √ 631 985.620 PZ5-30A 450 90 0.5 155 3.00 3.25 9.28 7.72 S, US
4 40 1⁄40 M1125046.00 √ 631 985.623 PZ5-30A 450 180 0.2 155 3.00 3.25 9.30 7.74 S, US
Accessories / Kits
10 100 1⁄20 M1115001.00 √ 631 985.621 PZ4-30E 180 90 0.5 155 3.00 3.25 9.28 7.72 S, US
19 100 1⁄20 M1125047.00 C/A 631 985.624 PZ4-30A 180 180 0.3 155 3.00 3.25 9.30 7.74 S, US
20 100 1⁄20 M1115000.00 √ 631 985.622 PZ4-30E 90 90 0.5 155 3.00 3.25 9.28 7.72 S, US
20 100 1⁄20 M1125048.00 C/A 631 985.625 PZ4-30A 90 180 0.3 155 3.00 3.25 9.30 7.74 S, US
30 100 1⁄17 M1125002.00 √ 688 985.627 PZ3-30B 60 90 0.8 155 3.00 2.68 8.74 7.18 S, US
30 100 1⁄17 M1125037.00 √ 688 985.635 PZ3-30B 60 180 0.4 155 3.00 2.68 8.74 7.18 S, US
60 56 1⁄17 M1125003.00 √ 688 985.628 PZ3-30B 30 90 0.8 171 3.00 2.68 8.74 7.18 S, US
60 56 1⁄17 M1125036.00 √ 688 985.634 PZ3-30B 30 180 0.4 171 3.00 2.68 8.74 7.18 S, US
Mods / Factory
100 36 1⁄17 M1125004.00 √ 688 985.626 PZ3-30B 18 90 0.8 171 3.00 2.68 8.74 7.18 S, US
Options
100 36 1⁄17 M1125035.00 √ 688 985.631 PZ3-30B 18 180 0.4 171 3.00 2.68 8.74 7.18 S, US
150 24 1⁄17 M1125005.00 √ 652 985.629 PZ2-30B 12 90 0.8 180 3.00 2.40 8.46 6.9 S, US
150 24 1⁄17 M1125034.00 √ 652 985.633 PZ2-30B 12 180 0.4 180 3.00 2.40 8.46 6.9 S, US
300 10 1⁄17 M1125006.00 √ 652 985.630 PZ2-30B 6 90 0.8 180 3.00 2.40 8.46 6.9 S, US
300 10 1⁄17 M1125033.00 √ 652 985.632 PZ2-30B 6 180 0.4 180 3.00 2.40 8.46 6.9 S, US
X-Ref / Index
Specifications are subject to change without notice
Tech Information
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) P X XL XH Notes
10 100 1⁄20 M1125213.00 √ 699 985.653 PZ4-30 180 12 2.7 155 3.00 3.25 9.28 7.72 S, US
30 100 1⁄17 M1125214.00 √ 743 985.654 PZ3-30 60 12 5.2 155 3.00 2.68 8.74 7.18 S, US
55 56 1⁄17 M1125215.00 C/A 743 985.655 PZ3-30 30 12 5.6 171 3.00 2.68 8.74 7.18 S, US
Warnings/Cautions
PZ SERIES - DC Conduit Box Dimensions (IN)
Frame XW AB H L
30/31 2.63 3.47 1.90 3.13
.900
Ref
329
Gearmotors Gearmotors
Parallel Shaft - P300 Series - DC
Features:
• Precision machined in-line steel gears
Mods / Factory
Application Notes:
X-Ref / Index
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as
an SCR control should be used to prevent damage. This issue is even more critical for low voltage
motors, typically no controller is used since motor is connected directly to a battery, so some type
Tech Information
Gearmotors
Parallel Shaft - P300 Series - DC
AC / DC Controls
90 & 180 Volts - TENV - P300 Series
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) P X XL XH Notes
5 353 1⁄20 M1115024.00 √ 905 985.602 P303-30E 336 90 0.5 565 3.00 3.54 10.07 8.57 S, US
9 268 1⁄20 M1115025.00 √ 905 985.603 P303-30E 216 90 0.5 474 3.00 3.54 10.07 8.57 S, US
Accessories / Kits
18 150 1⁄20 M1115026.00 √ 905 985.604 P303-30E 103 90 0.5 385 3.00 3.54 10.07 8.57 S, US
20 140 1⁄20 M1125092.00 √ 927 985.607 P303-31E 90 180 0.3 370 3.11 3.54 10.07 8.57 S, US
24 280 1⁄8 M1125069.00 √ 927 985.611 P303-30E 76 90 1.3 353 3.00 3.54 11.54 10.04 S, US
31 220 1⁄8 M1125070.00 √ 927 985.612 P303-30E 58 90 1.3 327 3.00 3.54 11.54 10.04 S, US
31 220 1⁄8 M1125038.00 √ 927 985.617 P303-30E 58 180 0.7 327 3.00 3.54 11.54 10.04 S, US
34 82 1⁄20 M1115027.00 √ 905 985.605 P303-30E 52 90 0.5 318 3.00 3.54 10.07 8.57 S, US
51 130 1⁄8 M1125071.00 √ 854 985.615 P302-30E 35 90 1.3 277 3.00 3.54 11.54 10.04 S, US
51 130 1⁄8 M1125039.00 √ 854 985.614 P302-30E 35 180 0.7 277 3.00 3.54 11.54 10.04 S, US
Mods / Factory
51 55 1⁄20 M1115028.00 √ 833 985.606 P302-30E 35 90 0.5 281 3.00 3.54 10.07 8.57 S, US
Options
61 113 1⁄8 M1125072.00 √ 854 985.610 P302-30E 29 90 1.3 267 3.00 3.54 11.54 10.04 S, US
60 45 1⁄20 M1125093.00 √ 854 985.609 P302-31E 29 180 0.3 267 3.11 3.54 10.07 8.57 S, US
94 77 1⁄8 M1125073.00 √ 854 985.613 P302-30E 19 90 1.3 236 3.00 3.54 11.54 10.04 S, US
94 77 1⁄8 M1125040.00 √ 854 985.618 P302-30E 19 180 0.7 236 3.00 3.54 11.54 10.04 S, US
109 27 1⁄20 M1115029.00 √ 833 985.601 P302-30E 16 90 0.5 224 3.00 3.54 10.07 8.57 S, US
106 26 1⁄20 M1125094.00 C/A 833 985.608 P302-31E 16 180 0.3 222 3.11 3.54 10.07 8.57 S, US
X-Ref / Index
167 43 1⁄8 M1125074.00 √ 854 985.616 P302-30E 11 90 1.3 197 3.00 3.54 11.54 10.04 S, US
170 43 1⁄8 M1125041.00 √ 854 985.619 P302-30E 11 180 0.7 196 3.00 3.54 11.54 10.04 S, US
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Tech Information
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number s Frame to 1 DC DC (lb.) P X XL XH Notes
5 353 1⁄20 M1125217.00 √ 927 985.657 P303-30 336 12 5.6 565 3.00 3.85 10.07 8.57 S, US
31 220 1⁄8 M1125218.00 √ 950 985.658 P303-30 58 12 10.6 327 3.00 3.54 11.54 10.04 S, US
51 130 1⁄8 M1125219.00 √ 913 985.659 P302-30 35 12 10.3 277 3.00 3.23 11.54 10.04 S, US
Warnings/Cautions
61 113 1⁄8 M1125220.00 √ 873 985.660 P302-30 29 12 10.4 267 3.00 3.23 11.54 10.04 S, US
P300 SERIES
Conduit Box Dimensions (IN)
Frame XW AB H L
X
30/31 2.63 3.47 1.90 3.13
331
Gearmotors Gearmotors
Off-Set Shaft Gearmotors - OS300 Series - DC
Features:
• Precision machined in-line steel gears
Mods / Factory
Application Notes:
X-Ref / Index
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as an
SCR control should be used to prevent damage. This issue is even more critical for low voltage motors,
typically no controller is used since motor is connected directly to a battery, so some type of current limit
Tech Information
332
Gearmotors
Gearmotors
Off-Set Shaft Gearmotors - OS300 Series - DC
AC / DC Controls
90 Volts - TENV - OS300 Series
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) P X XL XH Notes
9 268 1⁄20 M1125251.00 C/A 763 985.692 OS303-30 210 90 0.5 474 3.00 2.81 4.5 8.52 S, US
19 150 1⁄20 M1125250.00 √ 798 985.691 OS303-30 103 90 0.6 385 3.00 2.81 4.5 8.52 S, US
Accessories / Kits
24 280 1⁄8 M1125249.00 C/A 783 985.690 OS303-30 76 90 1.3 353 3.00 2.81 6.42 10.45 S, US
31 220 1⁄8 M1125248.00 √ 783 985.689 OS303-30 58 90 1.4 327 3.00 2.81 6.42 10.45 S, US
51 130 1⁄8 M1125247.00 √ 783 985.688 OS303-30 35 90 1.4 277 3.00 2.81 6.42 10.45 S, US
Mods / Factory
Options
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) P X XL XH Notes
9 268 1⁄20 M1125256.00 C/A 783 985.697 OS303-30 210 12 4.5 474 3.00 2.81 4.5 8.52 S, US
18 150 1⁄20 M1125255.00 C/A 783 985.696 OS303-30 103 12 5.0 385 3.00 2.08 4.5 8.52 S, US
24 280 1⁄8 M1125254.00 C/A 802 985.695 OS303-30 76 12 10.6 353 3.00 2.81 6.42 10.45 S, US
X-Ref / Index
31 220 1⁄8 M1125253.00 √ 838 985.694 OS303-30 58 12 10.6 327 3.00 2.81 6.42 10.45 S, US
51 130 1⁄8 M1125252.00 √ 802 985.693 OS303-30 35 12 10.3 277 3.00 2.81 6.42 10.45 S, US
Tech Information
OS300 SERIES
3.94 REF
"XL" REF
3.375 TYP
.187 SQ 1.50
1.688 x 1.00 LONG
KEY 1.31 2.81 REF
Warnings/Cautions
"XH"
1.00
FULL 3.13 REF CONDUIT BOX
1.58
DEPTH (OPTIONAL)
.675
(3) LEADS
12.0 LONG MIN
1.79 REF
3.375 TYP
.625
Ø.624
.517
6.11 REF
1.25
TO SHAFT
SHOULDER
TOP
.62 DP MIN
1.65
.11 REF
LOAD SPRING
NAMEPLATE AT THIS END
3.30 LOCKSEAM
(FAR SIDE)
333
Gearmotors Gearmotors
PE350 Series - Parallel Shaft - DC
Features:
• Rugged die cast aluminum gear housing for maximum gear and bearing support
Mods / Factory
• All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock
overload of 200%
• Oversized output bearings for greater overhung load capacity and long life
• High carbon alloy output shaft provides maximum strength and rigidity
• All needle bearing journals are precision ground after heat treating to provide maximum
fit and finish
X-Ref / Index
• Heavy duty industrial oil seals keep lubricant in and dirt out
• Gears and bearings are splash lubricated with permanent, heavy duty gear oil
• Optional conduit box available, see page 358
Application Notes:
Tech Information
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as
an SCR control should be used to prevent damage. This issue is even more critical for low voltage
motors, typically no controller is used since motor is connected directly to a battery, so some type of
current limit or fusing should be considered
• Overhung load capacities shown are at center of output shaft
Warnings/Cautions
Gearmotors
PE350 Series - Parallel Shaft - DC
AC / DC Controls
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) XL XH Notes
7 330 1⁄8 M1135106.00 √ 914 M34D25NZ62 P353-34 336 90 0.7 565 11.31 9.31 S, US
7 330 1⁄8 M1135139.00 C/A 914 M34D25NZ71 P353-34 336 180 0.4 565 11.31 9.31 S, US
14 341 1⁄8 M1135107.00 √ 914 M34D25NZ61 P353-34 180 90 1.0 465 11.31 9.31 S, US
Accessories / Kits
14 341 1⁄8 M1135140.00 √ 956 M34D25NZ72 P353-34 180 180 0.5 465 11.31 9.31 S, US
21 371 1⁄4 M1135117.00 √ 957 M34D25NZ52 P353-34 124 90 1.1 413 13.31 11.31 S, US
21 371 1⁄4 M1135141.00 √ 957 M34D25NZ73 P353-34 124 180 0.6 413 13.31 11.31 S, US
27 305 1⁄4 M1135115.00 √ 957 M34D25NZ51 P353-34 91 90 1.5 374 13.31 11.31 S, US
27 305 1⁄4 M1135142.00 √ 1.001 M34D25NZ74 P353-34 91 180 0.8 374 13.31 11.31 S, US
42 280 1⁄4 M1135108.00 √ 957 M34D25NZ53 P353-34 58 90 2.3 327 13.31 11.31 S, US
42 280 1⁄4 M1135143.00 √ 957 M34D25NZ75 P353-34 58 180 1.2 327 13.31 11.31 S, US
50 250 1⁄4 M1135109.00 √ 957 M34D25NZ54 P353-34 50 90 2.3 315 13.31 11.31 S, US
Mods / Factory
50 250 1⁄4 M1135144.00 √ 957 M34D25NZ76 P353-34 50 180 1.2 315 13.31 11.31 S, US
Options
62 220 1⁄4 M1135110.00 √ 957 M34D25NZ55 P353-34 43 90 2.3 303 13.31 11.31 S, US
62 220 1⁄4 M1135145.00 √ 1.001 M34D25NZ77 P353-34 43 180 1.2 303 13.31 11.31 S, US
83 155 1⁄4 M1135114.00 √ 905 M34D25NZ57 P352-34 29 90 2.3 267 13.31 11.31 S, US
83 155 1⁄4 M1135146.00 √ 905 M34D25NZ78 P352-34 29 180 1.2 267 13.31 11.31 S, US
125 100 1⁄4 M1135111.00 √ 905 M34D25NZ56 P352-34 23 90 2.0 256 13.31 11.31 S, US
125 100 1⁄4 M1135147.00 √ 905 M34D25NZ79 P352-34 23 180 1.0 256 13.31 11.31 S, US
X-Ref / Index
165 70 1⁄4 M1135112.00 √ 905 M34D25NZ58 P352-34 15 90 2.0 232 13.31 11.31 S, US
165 70 1⁄4 M1135148.00 √ 905 M34D25NZ80 P352-34 15 180 1.0 232 13.31 11.31 S, US
250 45 1⁄4 M1135116.00 √ 905 M34D25NZ60 P352-34 10 90 2.0 201 13.31 11.31 S, US
250 45 1⁄4 M1135149.00 √ 905 M34D25NZ81 P352-34 10 180 1.0 201 13.31 11.31 S, US
500 25 1⁄4 M1135113.00 √ 905 M34D25NZ59 P352-34 5 90 2.0 194 13.31 11.31 S, US
500 25 1⁄4 M1135150.00 √ 905 M34D25NZ82 P352-34 5 180 1.0 194 13.31 11.31 S, US
Tech Information
C/A - Check Availability
Specifications are subject to change without notice
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) XL XH Notes
Warnings/Cautions
14 341 1⁄8 M1135243.00 √ 933 M34D25NZ154 P353-34 180 12 8.7 465 11.05 9.05 S, US
42 325 1⁄4 M1135244.00 √ 979 M34D25NZ155 P353-34 58 12 21.0 327 13.31 11.31 S, US
62 220 1⁄4 M1135245.00 √ 979 M34D25NZ156 P353-34 43 12 21.0 303 13.31 11.31 S, US
83 155 1⁄4 M1135246.00 √ 927 M34D25NZ157 P352-34 29 12 21.0 267 13.31 11.31 S, US
335
Gearmotors Gearmotors
Parallel Shaft - P1100 Series - DC
Features:
• Rugged die cast aluminum gear housing for maximum gear and bearing support
Mods / Factory
• All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock
overload of 200%
• Oversized output bearings for greater overhung load capacity and long life
• High carbon alloy output shaft provides maximum strength and rigidity
• All needle bearing journals are precision ground after heat treating to
provide maximum fit and finish
X-Ref / Index
• Heavy duty industrial oil seals keep lubricant in and dirt out
• Gears and bearings are splash lubricated with permanent, heavy duty gear oil
• Conduit box included as standard
Application Notes:
Tech Information
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as
an SCR control should be used to prevent damage. This issue is even more critical for low voltage
motors, typically no controller is used since motor is connected directly to a battery, so some type of
current limit or fusing should be considered
• Overhung load capacities shown are at center of output shaft
Warnings/Cautions
Gearmotors
Parallel Shaft - P1100 Series - DC
AC / DC Controls
90 Volts - Totally Enclosed - Rigid Base - P1100 Series
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) XL XH Notes
8 1087 1⁄4 108700.00 √ 1,559 4D17NZ17 P1103-48 212 90 2.7 700 14.24 12.74 S, US, 12
12 1030 1⁄4 108701.00 √ 1,559 4D17NZ18 P1103-48 143 90 2.7 700 14.24 12.74 S, US, 12
Accessories / Kits
18 750 1⁄4 108702.00 √ 1,559 4D17NZ19 P1103-48 95 90 2.7 700 14.24 12.74 S, US, 12
42 353 1⁄4 108703.00 √ 1,520 4D17NZ20 P1102-48 42 90 2.7 650 14.24 12.74 S, US, 12
60 238 1⁄4 108704.00 √ 1,520 4D17NZ21 P1102-48 29 90 2.7 625 14.24 12.74 S, US, 12
92 160 1⁄4 108705.00 √ 1,464 4D17NZ22 P1102-48 19 90 2.7 575 14.24 12.74 S, US, 12
135 105 1⁄4 108706.00 √ 1,520 4D17NZ23 P1102-48 13 90 2.7 525 14.24 12.74 S, US, 12
18 1112 1⁄2 108707.00 √ 1,684 4D17FZ23 P1103-48 95 90 5.0 700 16.49 14.99 S, US
33 822 1⁄2 108708.00 √ 1,684 4D17FZ24 P1103-48 53 90 5.0 650 16.49 14.99 S, US
42 705 1⁄2 108709.00 √ 1,653 4D17FZ25 P1102-48 42 90 5.0 650 16.49 14.99 S, US
Mods / Factory
60 476 1⁄2 108710.00 √ 1,653 4D17FZ26 P1102-48 29 90 5.0 625 16.49 14.99 S, US
Options
92 320 1⁄2 108711.00 √ 1,653 4D17FZ27 P1102-48 19 90 5.0 575 16.49 14.99 S, US
135 210 1⁄2 108712.00 √ 1,653 4D17FZ28 P1102-48 13 90 5.0 525 16.49 14.99 S, US
X-Ref / Index
Over- Dimensions (inches)
F.L. Gearmotor Arm. F.L. hung
Stock
Output Torque Input Catalog List Model Type & Ratio Volts Amps Load
RPM (Lb In.) HP Number Price Number Frame to 1 DC DC (lb.) XL XH Notes
8 1087 1⁄4 108729.00 √ 1,593 4D17NZ43 P1103-48 212 12 21 700 13.74 12.24 S, US, 12
60 238 1⁄4 108730.00 √ 1,558 4D17NZ44 P1102-48 29 12 21 625 13.74 12.24 S, US, 12
Tech Information
42 705 1⁄2 108731.00 √ 1,684 4D17FZ52 P1102-48 42 12 40 650 15.99 14.49 S, US
92 320 1⁄2 108732.00 C/A 1,621 4D17FZ53 P1102-48 19 12 40 575 15.99 14.49 S, US
Warnings/Cautions
P1100 SERIES - DC
337
Gearmotors Gearmotors
Right-Angle DC Gearmotors
Features:
• Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life and
Mods / Factory
quiet operation
Options
• Optional gearbox base available (10 Series only), see page 358
Application Notes:
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail
Tech Information
• These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other
mountings, the breather plug must be reoriented by using a 90° 1⁄8" NPT taper pipe elbow. Regal does not
offer this elbow. It is not recommended to place the gearmotor with the gearbox shaft up.
• Overhung load capacities shown are at center of output shaft
Warnings/Cautions
10 SERIES - DC 13 SERIES - DC
338
Gearmotors
Gearmotors
Right-Angle DC Gearmotors
AC / DC Controls
90 & 180 Volts - TENV - Right-Angle
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
Stock
put (Lb Input Catalog List Model Type & Ratio Volts Amps Load
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
42 22 1⁄17 M1115018.00 √ 708 985.504 10F60-25D 60 90 0.9 185 2.5 3 3.6 8.79 5.19 S, US
62 19 1⁄17 M1115019.00 √ 708 985.505 10F40-25D 40 90 0.9 185 2.5 3 3.6 8.79 5.19 S, US
Accessories / Kits
125 16 1⁄17 M1115020.00 √ 708 985.506 10F20-25D 20 90 0.9 185 2.5 3 3.6 8.79 5.19 S, US
250 10 1⁄17 M1115021.00 √ 708 985.509 10F10-25D 10 90 1.0 185 2.5 3 3.6 8.79 5.19 S, US
500 5 1⁄17 M1115022.00 √ 708 985.507 10F05-25D 5 90 1.0 185 2.5 3 3.6 8.79 5.19 S, US
42 30 1⁄12 M1135053.00 √ 708 M34D25NZ30 13F60-34A 60 180 0.5 235 3.38 4 4.5 9.64 5.14 S, US
62 35 1⁄12 M1135054.00 C/A 708 M34D25NZ31 13F40-34A 40 180 0.5 235 3.38 4 4.5 9.64 5.14 S, US
125 18 1⁄12 M1135055.00 √ 741 CM34D25NZ32 13F20-34A 20 180 0.5 235 3.38 4 4.5 9.64 5.14 S, US
250 10 1⁄12 M1135056.00 C/A 708 M34D25NZ47 13F10-34A 10 180 0.5 235 3.38 4 4.5 9.64 5.14 S, US
500 5 1⁄12 M1135057.00 C/A 708 M34D25NZ48 13F05-34A 5 180 0.5 235 3.38 4 4.5 9.64 5.14 S, US
Mods / Factory
42 80 1⁄8 M1135069.00 √ 816 M34D25NZ18 13F60-34C 60 90 1.4 235 3.38 4 4.5 10.64 6.14 S, US
Options
62 70 1⁄8 M1135038.00 √ 816 M34D25NZ6 13F40-34C 40 90 1.4 235 3.38 4 4.5 10.64 6.14 S, US
62 70 1⁄8 M1135058.00 √ 816 M34D25NZ26 13F40-34C 40 180 0.7 235 3.38 4 4.5 10.64 6.14 S, US
125 45 1⁄8 M1135039.00 √ 816 M34D25NZ7 13F20-34C 20 90 1.4 235 3.38 4 4.5 10.64 6.14 S, US
125 45 1⁄8 M1135059.00 √ 816 M34D25NZ27 13F20-34C 20 180 0.7 235 3.38 4 4.5 10.64 6.14 S, US
250 25 1⁄8 M1135040.00 √ 816 M34D25NZ8 13F10-34C 10 90 1.4 235 3.38 4 4.5 10.64 6.14 S, US
250 25 1⁄8 M1135060.00 √ 816 M34D25NZ28 13F10-34C 10 180 0.7 235 3.38 4 4.5 10.64 6.14 S, US
X-Ref / Index
500 13 1⁄8 M1135041.00 √ 816 M34D25NZ9 13F05-34C 5 90 1.4 235 3.38 4 4.5 10.64 6.14 S, US
500 13 1⁄8 M1135061.00 C/A 816 M34D25NZ29 13F05-34C 5 180 0.7 235 3.38 4 4.5 10.64 6.14 S, US
62 135 1⁄4 M1135042.00 √ 880 M34D25NZ10 13F40-34G 40 90 2.3 235 3.38 4 4.5 12.64 8.14 S, US
62 135 1⁄4 M1135062.00 √ 880 M34D25NZ33 13F40-34G 40 180 1.3 235 3.38 4 4.5 12.64 8.14 S, US
83 125 1⁄4 M1135043.00 √ 880 M34D25NZ11 13F30-34G 30 90 2.3 235 3.38 4 4.5 12.64 8.14 S, US
83 125 1⁄4 M1135063.00 √ 880 M34D25NZ34 13F30-34G 30 180 1.3 235 3.38 4 4.5 12.64 8.14 S, US
125 90 1⁄4 M1135044.00 √ 880 M34D25NZ12 13F20-34G 20 90 2.3 235 3.38 4 4.5 12.64 8.14 S, US
Tech Information
125 90 1⁄4 M1135064.00 √ 880 M34D25NZ35 13F20-34G 20 180 1.3 235 3.38 4 4.5 12.64 8.14 S, US
250 50 1⁄4 M1135045.00 √ 880 M34D25NZ13 13F10-34G 10 90 2.3 235 3.38 4 4.5 12.64 8.14 S, US
250 50 1⁄4 M1135065.00 √ 880 M34D25NZ36 13F10-34G 10 180 1.3 235 3.38 4 4.5 12.64 8.14 S, US
500 30 1⁄4 M1135046.00 √ 880 M34D25NZ14 13F05-34G 5 90 2.3 235 3.38 4 4.5 12.64 8.14 S, US
500 30 1⁄4 M1135066.00 √ 880 M34D25NZ37 13F05-34G 5 180 1.3 235 3.38 4 4.5 12.64 8.14 S, US
Warnings/Cautions
12 Volts - TENV - Right-Angle Series
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
Stock
put (Lb Input Catalog List Model Type & Ratio Volts Amps Load
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
42 80 1⁄8 M1135249.00 C/A 833 M34D25NZ158 13F60-34 60 12 11.0 235 3.38 4.21 4.5 10.39 5.89 S, US
250 25 1⁄8 M1135250.00 C/A 833 M34D25NZ159 13F10-34 10 12 11.0 235 3.38 4.21 4.5 10.39 5.89 S, US
62 135 1⁄4 M1135251.00 √ 892 M34D25NZ160 13F40-34 40 12 21.0 235 3.38 4.21 4.5 12.64 8.14 S, US
125 90 1⁄4 M1135252.00 √ 892 M34D25NZ161 13F20-34 20 12 21.0 235 3.38 4.21 4.5 12.64 8.14 S, US
339
Gearmotors Gearmotors
Features:
• Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life
Mods / Factory
• Single piece die cast aluminum alloy housing is vacuum impregnated with Resinol RT for protection
and sealing
• Light weight gearbox combines high tensile strength along with being precision machined for
alignment of bearings and gearing
• High temperature nitrile seals for optimum seal life
• Gearbox provided with solid output shaft, but can be converted to a hollow output shaft. Simply
X-Ref / Index
Gearmotors
Bravo® Series 12 SUB-FHP - DC
Right-Angle Gearmotors
AC / DC Controls
F.L. Arm. F.L.
Stock
Output Torque Input Catalog Gearmotor Ratio Volts Amps.
RPM (Lb.In.) HP Number List Price Model Number Enclosure Type & Frame to 1 DC DC Notes
28 125 1/8 M1135292.00 √ 834 M34D17NZ31 TENV 12B60-34D 61.0 90 1.6 S, US
45 87 1/8 M1135291.00 C/A 834 M34D17NZ30 TENV 12B39-34D 39.0 90 1.6 S, US
58 158 1/4 M1135290.00 √ 881 M34D17FZ7 TEFC 12B30-34G 30.0 90 2.8 S, US
90 100 1/4 M1135289.00 √ 881 M34D17FZ6 TEFC 12B19-34G 19.0 90 2.6 S, US
Accessories / Kits
115 85 1/4 M1135288.00 C/A 881 M34D17FZ5 TEFC 12B15-34G 15.0 90 2.6 S, US
167 61 1/4 M1135287.00 √ 881 M34D17FZ4 TEFC 12B11-34G 10.6 90 2.6 S, US
250 46 1/4 M1135286.00 √ 881 M34D17FZ3 TEFC 12B7-34G 7.0 90 2.6 S, US
C/A - Check Availability Note listing on inside back flap
Specifications are subject to change without notice
Mods / Factory
Stock
Options
RPM (Lb.In.) HP Number Price Model Number Enclosure Type & Frame to 1 DC DC Notes
27 134 1/8 M1135285.00 C/A 868 M34D17NZ29 TENV 12B60-34C 61.0 12 14.0 S, US
45 94 1/8 M1135284.00 C/A 868 M34D17NZ28 TENV 12B39-34C 39.0 12 15.0 S, US
58 158 1/4 M1135297.00 √ 950 M34D17NZ36 TENV 12B30-34F 30.0 12 24.0 S, US
90 100 1/4 M1135296.00 C/A 909 M34D17NZ35 TENV 12B19-34F 19.0 12 24.0 S, US
115 85 1/4 M1135295.00 C/A 909 M34D17NZ34 TENV 12B15-34F 15.0 12 23.0 S, US
167 61 1/4 M1135294.00 C/A 909 M34D17NZ33 TENV 12B11-34F 10.6 12 21.0 S, US
X-Ref / Index
250 46 1/4 M1135293.00 √ 950 M34D17NZ32 TENV 12B7-34F 7.0 12 23.0 S, US
Notes:
1 Conduit box not supplied with the gearmotor. Mounting provisions are provided and can use conduit box
Tech Information
kit catalog number M1760007.00 found on page 356.
2 For solid double output shaft, consult factory.
Warnings/Cautions
341
Gearmotors Gearmotors
IP55 Washguard® Gearmotors - P300 Series - DC
• Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable
speed control having a typical form factor of 1.3 to 1.4
Features:
• Gearbox output shafts are coated with Microlon® 3300 fortified Teflon® for superior corrosion
resistance
• Frame, endshields, armature and interior components protected by enamel and polyester compounds
for resistance to moisture, acids, alkalies and oil
• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
Mods / Factory
provided
• All hardware is stainless steel
• Painted with white epoxy for superior corrosion resistance and protection
• Machined fits between the endbells and motor frame are sealed with gaskets
• Thru-bolt heads and nuts sealed with fiber washers
• O-rings under each threaded brush cover
Tech Information
Application Notes:
• Extended life in wet, high humidity applications
• Design repels water from entering motor
• Internal components protected against rust and corrosion
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
Warnings/Cautions
lubricant into the motor should the motor shaft seal fail
• Overhung load capacities shown are at center of output shaft
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as
an SCR control should be used to prevent damage. This issue is even more critical for low voltage
motors, typically no controller is used since motor is connected directly to a battery, so some type of
current limit or fusing should be considered
• USDA Approved white epoxy finish
• Bison®/Dayton® direct interchange
Gearmotors
IP55 Washguard® Gearmotors - P300 Series - DC
AC / DC Controls
90 Volts - TENV - P300 Series
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
put (Lb Input Catalog Stock List Model Type & Ratio Volts Amps Load
Accessories / Kits
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
5 353 1⁄20 M1125261.00 √ 1,051 M31D17VZ5 P303-31 336 90 0.8 565 3.13 3.8 3.54 10.44 8.94 S, US
31 220 1⁄8 M1125262.00 √ 1,080 M31D17VZ6 P303-31 58 90 1.6 327 3.13 3.8 3.54 11.94 10.44 S, US
51 130 1⁄8 M1125263.00 √ 999 M31D17VZ7 P302-31 35 90 1.6 277 3.13 3.8 3.54 11.94 10.44 S, US
94 77 1⁄8 M1125264.00 √ 999 M31D17VZ8 P302-31 19 90 1.6 236 3.13 3.8 3.54 11.94 10.44 S, US
167 43 1⁄8 M1125265.00 √ 999 M31D17VZ9 P302-31 11 90 1.6 197 3.13 3.8 3.54 11.94 10.44 S, US
Mods / Factory
Specifications are subject to change without notice
Options
12 Volts - TENV - P300 Series
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
Stock
put (Lb Input Catalog List Model Type & Ratio Volts Amps Load
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
X-Ref / Index
5 353 1⁄20 M1125266.00 √ 1,080 M31D17VZ10 P303-31 336 12 6.4 565 3.13 3.8 3.54 10.44 8.94 S, US
31 220 1⁄8 M1125267.00 √ 1,107 M31D17VZ11 P303-31 58 12 11 327 3.13 4.43 3.54 11.44 9.94 S, US
Tech Information
4.08 REF
1/2 NPT
Warnings/Cautions
.66 1.656
CONDUIT
1.86 REF
.175 PLUG
Ø.625 .624
4.75
"P"
3.375
5.12
3.125 ±.010
3.000
3.50
IMMERSION PROOF
BREATHER
1.125 1.450 1.500 2.00 .281
TYP
4.00
2.250
(8) Ø.230 X .44 DP
(3) 1/4-20 UNC-2B 4.96 REF
.50 DP
343
Gearmotors Gearmotors
IP55 Washguard® Gearmotors - PE350 - DC
• Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable
speed control having a typical form factor of 1.3 to 1.4
Features:
• Gearbox output shafts are coated with Microlon® 3300 fortified Teflon® for superior corrosion
resistance
• Frame, endshields, armature and interior components protected by enamel and polyester
compounds for resistance to moisture, acids, alkalies and oil
• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
Mods / Factory
provided
• All hardware is stainless steel
• Painted with white epoxy for superior corrosion resistance and protection
• Machined fits between the endbells and motor frame are sealed with gaskets
• Thru-bolt heads and nuts sealed with fiber washers
• O-rings under each threaded brush cover
Tech Information
Application Notes:
• Extended life in wet, high humidity applications
• Design repels water from entering motor
• Internal components protected against rust and corrosion
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
Warnings/Cautions
lubricant into the motor should the motor shaft seal fail
• Overhung load capacities shown are at center of output shaft
• Motor’s stall torque could exceed recommended full load torques. A current limiting device such as
an SCR control should be used to prevent damage. This issue is even more critical for low voltage
motors, typically no controller is used since motor is connected directly to a battery, so some type of
current limit or fusing should be considered
• USDA Approved white epoxy finish
• Bodine®/Baldor® direct interchange
Gearmotors
IP55 Washguard® Gearmotors - PE350 - DC
AC / DC Controls
90 Volts - TENV - PE350 Series - Parallel Shaft
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
put (Lb Input Catalog Stock List Model Type & Ratio Volts Amps Load
Accessories / Kits
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
14 341 1⁄8 M1125268.00 √ 1,088 M31D25VZ1 P353-31 180 90 1.5 465 3.13 3.8 3.45 11.84 9.84 S, US
42 280 1⁄4 M1125269.00 √ 1,126 M32D25VZ1 P353-32 58 90 2.6 327 3.25 3.8 3.45 13.84 11.84 S, US
83 155 1⁄4 M1125270.00 √ 1,098 M32D25VZ2 P353-32 29 90 2.6 267 3.25 3.8 3.45 13.84 11.84 S, US
250 45 1⁄4 M1125271.00 √ 1,098 M32D25VZ3 P352-32 10 90 2.6 201 3.25 3.8 3.45 13.84 11.84 S, US
500 25 1⁄4 M1125272.00 √ 1,098 M32D25VZ4 P352-32 5 90 2.6 194 3.25 3.8 3.45 13.84 11.84 S, US
Mods / Factory
Specifications are subject to change without notice
Options
12 Volts - TENV - PE350 Series - Parallel Shaft
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
Stock
put (Lb Input Catalog List Model Type & Ratio Volts Amps Load
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
X-Ref / Index
14 341 1⁄8 M1125273.00 √ 1,114 M31D25VZ2 P353-31 180 12 12 465 3.13 4.43 3.45 11.58 9.58 S, US
42 325 1⁄4 M1125274.00 C/A 1,233 M32D25VZ5 P353-32 58 12 20 327 3.25 4.43 3.45 13.84 11.84 S, US
Tech Information
3.60 REF "XL" REF 5.00
"XH" 3.625
2.94 REF .19 SQ
x 1.00 LONG 1.812
3.75 REF "X" 2.00 KEY
1/2 NPT .37
1.83 REF
CONDUIT 1.12
PLUG
KEYWAY
3.59 REF
MOTOR
.912
TOP
LEADS
6.0 LONG
Warnings/Cautions
Ø3.25
6.70 REF
6.08
MIN
3.625
Ø.750 .749
4.93
Ø1.53
.90 REF
4.00
345
Gearmotors
IP55 Washguard® Gearmotors - Right-Angle - DC
Gearmotors
• Constant torque throughout the range when powered by a full-wave unfiltered SCR-type adjustable
speed control having a typical form factor of 1.3 to 1.4
Features:
• 303 stainless steel gearbox output shaft
• Frame, endshields, armature and interior components protected by enamel and polyester compounds
for resistance to moisture, acids, alkalies and oil
• Cast conduit box with threaded conduit holes and nitrile gaskets keep water out
• Conduit box cover is made from 304 stainless steel
• For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is
Mods / Factory
provided
Options
• Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel for long life
and quiet operation
• Precision machined aluminum gear housing
• Lubrication is permanent with an oil bath
• Gearbox has all ball bearings
• Output shaft is field interchangeable from left hand to right hand style by reassembly
Tech Information
Application Notes:
• These right-angle gearmotors have a lubrication breather positioned for horizontal mounting. For other
mountings, the breather plug must be reoriented by using a 90 deg 1/8” NPT taper pipe elbow.
Warnings/Cautions
Regal does not offer this elbow. It is not recommended to place the gearmotor with the gearbox shaft
up.
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail.
346
Gearmotors
IP55 Washguard® Gearmotors - Right-Angle - DC
Gearmotors
AC / DC Controls
90 Volt - TENV - Right-Angle
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
put (Lb Input Catalog Stock List Model Type & Ratio Volts Amps Load
Accessories / Kits
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
42 80 1⁄8 M1125275.00 √ 1,088 M31D25VZ3 13F60-31 60 90 2.2 235 3.13 3.8 4.5 10.86 6.36 S, US
250 25 1⁄8 M1125276.00 √ 1,088 M31D25VZ4 13F10-31 10 90 2.2 235 3.13 3.8 4.5 10.86 6.36 S, US
62 135 1⁄4 M1125277.00 √ 1,098 M32D25VZ6 13F40-32 40 90 3.7 235 3.25 3.8 4.5 12.86 8.36 S, US
125 90 1⁄4 M1125278.00 √ 1,098 M32D25VZ7 13F20-32 20 90 3.7 235 3.25 3.8 4.5 12.86 8.36 S, US
250 50 1⁄4 M1125279.00 √ 1,098 M32D25VZ8 13F10-32 10 90 3.7 235 3.25 3.8 4.5 12.86 8.36 S, US
Note listing on inside back flap
Mods / Factory
Specifications are subject to change without notice
Options
12 Volts - TENV - Right-Angle
F.L. Over- Dimensions (inches)
Out- Torque Gearmotor Arm. F.L. hung
Stock
put (Lb Input Catalog List Model Type & Ratio Volts Amps Load
RPM In.) HP Number Price Number Frame to 1 DC DC (lb.) P PB X XL XH Notes
X-Ref / Index
62 135 1⁄4 M1125280.00 √ 1,042 M32D25VZ9 13F40-32 40 12 28 235 3.25 4.43 4.5 12.36 7.86 S, US
125 90 1⁄4 M1125281.00 √ 1,089 M32D25VZ10 13F20-32 20 12 28 235 3.25 4.43 4.5 12.36 7.86 S, US
Note listing on inside back flap
Specifications are subject to change without notice
Tech Information
13 SERIES - DC
"BD" REF
"XL" REF
3.60 REF
"XH" "X"
2.94 REF
3.75 REF
1/2 NPT
CONDUIT
PLUG
1.83 REF
Warnings/Cautions
2.76
MOTOR LEADS
6.00 LG MIN TOP
"AF"
"P"
4.62 MAX
FLAT
1.330
1.50
.593
FLAT
1.80
1.67
IMMERSION PROOF
BREATHER .187 SQ
X 1.13 LONG LEY
3.00
VIEW "Z-Z"
347
Gearmotors Gearmotors
Parallel Shaft - SUB-FHP - AC Gearmotors
Features:
• Permanent split capacitor design rated for 115 VAC 60 HZ input
• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
Accessories / Kits
Application Notes:
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
Mods / Factory
lubricant into the motor should the motor shaft seal fail
Options
• The motor’s stall torque could exceed recommended full load torques causing gearhead damage,
especially in ratios of 60:1 and higher. Provisions to limit the torque are recommended
• The torque values listed are the recommended full load torque values
• Overhung load capacities shown are at center of output shaft
• All PZ Series gearmotors are supplied with continuous duty “run” capacitor
• Optional conduit box available, see page 358
X-Ref / Index
Gearmotors
PZ Series - Parallel Shaft
AC / DC Controls
115 Volts - Totally Enclosed - Single Phase
F.L. Gear- Over- Dimensions (inches)
Torque motor F.L. hung Caacitor
Stock
Output (Lb. Input Catalog List Model Type & Ratio Amps Load Mfd.
RPM In.) HP Number Price Number Frame to 1 115 (lb.) P X XL XH 240 VAC Notes
2 100 1⁄150 M1125050.00 √ 658 M31P17NZ1 PZ5-31 900 0.4 155 3.07 3.23 8.71 7.15 3 S, US, 12
9 100 1⁄15 M1125127.00 √ 658 M31P17FZ1 PZ4-31 180 0.9 155 3.88 3.23 10.42 8.86 10 S, US, 13
Accessories / Kits
19 100 1⁄15 M1125128.00 √ 658 M31P17FZ2 PZ4-31 90 0.9 155 3.88 3.23 10.42 8.86 10 S, US, 13
28 100 1⁄15 M1125129.00 √ 658 M31P17FZ3 PZ3-31 60 0.9 155 3.88 2.43 9.62 8.06 10 S, US, 13
57 56 1⁄15 M1125130.00 √ 633 M31P17FZ4 PZ3-31 30 0.9 171 3.88 2.43 9.62 8.06 10 S, US, 13
94 36 1⁄15 M1125131.00 √ 633 M31P17FZ5 PZ3-31 18 0.9 171 3.88 2.43 9.62 8.06 10 S, US, 13
142 24 1⁄15 M1125132.00 √ 613 M31P17FZ6 PZ2-31 12 0.9 180 3.88 2.13 9.32 7.76 10 S, US, 13
283 12 1⁄15 M1125133.00 √ 613 M31P17FZ7 PZ2-31 6 0.9 180 3.88 2.13 9.32 7.76 10 S, US, 13
Mods / Factory
Note 13 - TEFC Specifications are subject to change without notice
Options
PZ SERIES - AC
X-Ref / Index
Tech Information
P
Warnings/Cautions
349
Gearmotors Gearmotors
P240 Series - SUB-FHP - AC Gearmotors
Output Torque - 43-391 In-Lbs.
AC / DC Controls
Features:
Accessories / Kits
• Permanent split capacitor design rated for 115/230 VAC 60/50 HZ input
• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
• Lubrication is permanent semi-fluid grease, reducing possibility of leakage
• Output shafts have needle bearings for high load capacities
• Shafts are hardened steel
• Optional conduit box available, see page 358
Mods / Factory
Options
Application Notes:
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail
• The motor’s stall torque could exceed recommended full load torques causing gearhead damage,
especially in ratios of 60:1 and higher. Provisions to limit the torque are recommended
• Overhung load capacities shown are at center of output shaft
X-Ref / Index
• All P240 Series gearmotors are supplied with continuous duty “run” capacitor
• Bison®/Dayton® direct interchange
Tech Information
X
Warnings/Cautions
Gearmotors
P240 Series - SUB-FHP - AC Gearmotors
Output Torque - 43-391 In-Lbs.
AC / DC Controls
Stock
put (Lb. Input Catalog List Model Type & Ratio Amps Load Mfd.
RPM In.) HP Number Price Number Frame to 1 @115V (lb.) P X XL XH 240 VAC Notes
8 345 1⁄15 M1145029.00 √ 985 M38P17NZ26 P243-38D 216 1.0 491 3.85 3.5 10.46 8.96 7.5 S, US, 12
15 250 1⁄15 M1145023.00 √ 985 M38P17NZ20 P243-38D 114 1.0 407 3.85 3.5 10.46 8.96 7.5 S, US, 12
16 391 1⁄6 M1145030.00 √ 1,068 M38P17FZ9 P243-38F 103 2.1 399 4.43 3.5 12.13 10.63 15 S, US, 13
30 135 1⁄15 M1145024.00 √ 894 M38P17NZ21 P242-38D 52 1.0 330 3.85 3.5 10.46 8.96 7.5 S, US, 12
30 295 1⁄6 M1145031.00 √ 1,068 M38P17FZ10 P243-38F 58 2.1 330 4.43 3.5 12.13 10.63 15 S, US, 13
40 219 1⁄6 M1145032.00 √ 1,068 M38P17FZ11 P243-38F 43 2.1 303 4.43 3.5 12.13 10.63 15 S, US, 13
Accessories / Kits
45 92 1⁄15 M1145025.00 C/A 894 M38P17NZ22 P242-38D 35 1.0 292 3.85 3.5 10.46 8.96 7.5 S, US, 12
60 157 1⁄6 M1145033.00 √ 980 M38P17FZ12 P242-38D 29 2.0 268 4.43 3.5 12.13 10.63 15 S, US, 13
70 61 1⁄15 M1145026.00 √ 894 M38P17NZ23 P242-38D 23 1.0 256 3.85 3.5 10.46 8.96 7.5 S, US, 12
90 103 1⁄6 M1145034.00 √ 980 M38P17FZ13 P242-38D 19 2.1 237 4.43 3.5 12.13 10.63 15 S, US, 13
97 43 1⁄15 M1145027.00 √ 894 M38P17NZ24 P242-38D 16.5 1.0 232 3.85 3.5 10.46 8.96 7.5 S, US, 12
139 30 1⁄15 M1145028.00 √ 894 M38P17NZ25 P242-38D 11.5 1.0 208 3.85 3.5 10.46 8.96 7.5 S, US, 12
156 60 1⁄6 M1145035.00 √ 980 M38P17FZ14 P242-38D 10.6 2.0 201 4.43 3.5 12.13 10.63 15 S, US, 13
Mods / Factory
C/A - Check Availability Note listing on inside back flap
Options
Note 12 - TENV Specifications are subject to change without notice
Note 13 - TEFC
Gearmotors
P240 Series - SUB-FHP - AC Gearmotors
X-Ref / Index
IP55 AC Washguard® Gearmotors
Tech Information
are designed for extended life in applications requiring regular
washdown or otherwise wet environments. Placing the
gearmotor with the motor below the gearbox should be avoided
to prevent leakage of lubricant into the motor should the motor
shaft seal fail.
Warnings/Cautions
Features:
• Shaft material coated with Teflon®/Ceramic plating • Ball bearings used in gear housing
• White epoxy painted motors • Sealed output shafts
• O-rings and gaskets used for sealing • Output shafts have needle bearings for high load
• Hardened worm-type gearing used capacities
• Interior components protected against corrosion • UL listed and CSA certified
Out-put Torque Input Catalog List Type & Ratio Amps Over-hung
RPM (Lb.In.) HP Number Price Model Number Frame to 1 Voltage @230 V Phase Load (Lbs.) Notes
16 391 1/6 M1145138.00 √ 1,121 M38P17FZ39 P240 103 115/230 1.05 1 399 S, US
40 219 1/6 M1145139.00 √ 1,172 M38P17FZ40 P240 43 115/230 1.00 1 303 S, US
156 60 1/6 M1145140.00 C/A 1,029 M38P17FZ41 P240 10.6 115/230 1.00 1 201 S, US
16 391 1/6 M1145144.00 √ 1,172 M38T17FZ20 P240 103 230 0.72 3 237 S, US
30 295 1/6 M1145145.00 √ 1,172 M38T17FZ21 P240 58 230 0.72 3 237 S, US
351
Teflon is a trademark or trade name ofThe Chemours Company.
and is not owned or controlled by Regal Beloit Corporation.
Gearmotors Gearmotors
PE350 Series - Parallel Shaft - AC Gearmotors
Features:
• All rated for 60/50 Hz operation except hi-torque single-phase which are 60 Hz only
• Rugged die cast aluminum gear housing for maximum gear and bearing support
• Precision machined gearing, hardened for maximum load capability
Accessories / Kits
• All gearing designed and rated to AGMA class 9 standards, and to withstand
momentary shock overload of 200%
• Oversized output bearings for greater overhung load capacity and long life
• High carbon alloy output shaft provides maximum strength and rigidity
• All needle bearing journals are precision ground after heat treating to provide
maximum fit and finish
• Heavy duty industrial oil seals keep lubricant in and dirt out
Mods / Factory
• Gears and bearings are splash lubricated with permanent, heavy duty gear oil
Options
5.125 BC
Gearmotors
PE350 Series - Parallel Shaft - AC Gearmotors
Single Phase - 115/230 Volts - Totally Enclosed - PE350 Series - Parallel Shaft
AC / DC Controls
Dimensions
F.L. Gearmotor F.L. Over- (inches) Capacitor
Stock
Output Torque Input Catalog List Model Type & Ratio Amps hung Mfd. 240
RPM (Lb.In.) HP Number Price Number Frame to 1 @115V Load (lb.) XL XH VAC Notes
5 310 1⁄12 096000.00 √ 936 42P17NZ1 PE353-42 336 1.3 565 11.36 9.36 10 S, US, 12
9 341 1⁄12 096001.00 √ 936 42P17NZ2 PE353-42 180 1.3 491 11.36 9.36 10 S, US, 12
14 330 1⁄12 096002.00 √ 901 42P17NZ3 PE353-42 124 1.3 459 11.36 9.36 10 S, US, 12
19 250 1⁄12 096003.00 √ 936 42P17NZ4 PE353-42 91 1.3 374 11.36 9.36 10 S, US, 12
Accessories / Kits
29 270 1⁄6 096004.00 √ 985 42P17FZ1 PE353-42 58 3.2 327 13.32 11.32 15 S, US, 13
34 250 1⁄6 096005.00 √ 985 42P17FZ2 PE353-42 50 3.2 330 13.32 11.32 15 S, US, 13
40 180 1⁄6 096006.00 C/A 985 42P17FZ3 PE353-42 43 3.2 303 13.32 11.32 15 S, US, 13
59 135 1⁄6 096007.00 √ 928 42P17FZ4 PE352-42 29 3.2 267 13.32 11.32 15 S, US, 13
75 90 1⁄6 096008.00 √ 928 42P17FZ5 PE352-42 23 3.2 256 13.32 11.32 15 S, US, 13
113 68 1⁄6 096009.00 √ 928 42P17FZ6 PE352-42 15 3.2 222 13.32 11.32 15 S, US, 13
160 45 1⁄6 096010.00 C/A 928 42P17FZ7 PE352-42 10 3.2 196 13.32 11.32 15 S, US, 13
Mods / Factory
340 25 1⁄6 096011.00 √ 928 42P17FZ8 PE352-42 5 3.2 190 13.32 11.32 15 S, US, 13
Hi-Torque Single Phase PE350 Gearmotors With Capacitor Start Motors
Options
58 320 1⁄3 096049.00 √ 1,089 42C17FZ4 PE353-42 30 7.2 300 14.56 12.56 … S, US, 13
85 218 1⁄3 096050.00 √ 1,023 42C17FZ5 PE353-42 20 7.2 300 14.56 12.56 … S, US, 13
173 109 1⁄3 096051.00 √ 1,023 42C17FZ6 PE353-42 10 7.2 300 14.56 12.56 … S, US, 13
345 55 1⁄3 096052.00 C/A 1,070 42C17FZ7 PE353-42 5 7.2 300 14.56 12.56 … S, US, 13
X-Ref / Index
C/A - Check Availability
Note 12 - TENV
Note 13 - TEFC
Tech Information
Dimensions
F.L. Gearmotor F.L. Over- (inches)
Stock
Output Torque Input Catalog List Type & Ratio Amps hung
RPM (Lb.In.) HP Number Price Model Number Frame to 1 @230V Load (lb.) XL XH Notes
58 320 1⁄3 096013.00 √ 1,081 42T17FZ14 PE353-42 30 1.6 300 13.81 11.81 S, US, 13
85 218 1⁄3 096014.00 √ 1,015 42T17FZ15 PE352-42 20 1.6 300 13.81 11.81 S, US, 13
173 109 1⁄3 096015.00 √ 1,015 42T17FZ16 PE352-42 10 1.6 300 13.81 11.81 S, US, 13
Warnings/Cautions
345 55 1⁄3 096016.00 √ 1,015 42T17FZ17 PE352-42 5 1.6 300 13.81 11.81 S, US, 13
5.125 BC
353
Gearmotors Gearmotors
P1100 Series - AC Gearmotors - Parallel Shaft
Features:
• Capacitor start designs rated for 115/230 VAC 60 HZ input
• Rugged die cast aluminum gear housing for maximum gear and bearing support
• Precision machined gearing, hardened for maximum load capability
Accessories / Kits
• All gearing designed and rated to AGMA class 9 standards, and to withstand momentary shock
overload of 200%
• Oversized output bearings for greater overhung load capacity and long life
• High carbon alloy output shaft provides maximum strength and rigidity
• All needle bearing journals are precision ground after heat treating to provide
maximum fit and finish
• Heavy duty industrial oil seals keep lubricant in and dirt out
Mods / Factory
• Gears and bearings are splash lubricated with permanent, heavy duty gear oil
Options
Application Notes:
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent leakage of
lubricant into the motor should the motor shaft seal fail
• Overhung load capacities shown are at center of output shaft
X-Ref / Index
7.69
Warnings/Cautions
4.55
Gearmotors
P1100 Series - AC Gearmotors - Parallel Shaft
AC / DC Controls
(inches)
Stock
Output Torque Input Catalog List Type & Ratio Amps Overhung
RPM (Lb.In.) HP Number Price Model Number Frame to 1 @115V Load (lb.) XL XH Notes
8 975 1⁄4 107000.00 √ 1,321 4C17FZ24 P1103-48 212 5.4 700 13.42 11.92 S, US
12 1030 1⁄4 107004.00 √ 1,321 4C17FZ28 P1103-48 143 5.4 700 13.42 11.92 S, US
18 800 1⁄4 107003.00 √ 1,321 4C17FZ27 P1103-48 95 5.4 700 13.42 11.92 S, US
26 569 1⁄4 107002.00 √ 1,321 4C17FZ26 P1103-48 66 5.4 650 13.42 11.92 S, US
59 248 1⁄4 107005.00 √ 1,290 4C17FZ29 P1102-48 29 5.4 625 13.42 11.92 S, US
Accessories / Kits
133 114 1⁄4 107001.00 √ 1,290 4C17FZ25 P1102-48 13 5.4 525 13.42 11.92 S, US
18 1089 1⁄3 107006.00 √ 1,335 4C17FZ30 P1103-48 95 6.2 700 13.67 13.17 S, US
26 752 1⁄3 107012.00 √ 1,335 4C17FZ36 P1103-48 66 6.2 650 13.67 13.17 S, US
41 461 1⁄3 107011.00 √ 1,308 4C17FZ35 P1102-48 42 6.2 650 13.67 13.17 S, US
59 330 1⁄3 107010.00 √ 1,308 4C17FZ34 P1102-48 29 6.2 625 13.67 13.17 S, US
91 224 1⁄3 107009.00 √ 1,308 4C17FZ33 P1102-48 19 6.2 575 13.67 13.17 S, US
157 125 1⁄3 107008.00 √ 1,308 4C17FZ32 P1102-48 11 6.2 500 13.67 13.17 S, US
288 70 1⁄3 107007.00 √ 1,308 4C17FZ31 P1102-48 6 6.2 400 13.67 13.17 S, US
Mods / Factory
22 1105 1⁄2 107013.00 √ 1,455 4C17FZ37 P1103-48 79 8.8 700 14.17 12.67 S, US
Options
41 700 1⁄2 107017.00 √ 1,427 4T17FZ41 P1102-48 42 8.8 650 14.17 12.67 S, US
59 496 1⁄2 107016.00 √ 1,427 4C17FZ40 P1102-48 29 8.8 625 14.17 12.67 S, US
91 336 1⁄2 107015.00 √ 1,427 4C17FZ39 P1102-48 19 8.8 575 14.17 12.67 S, US
133 229 1⁄2 107014.00 √ 1,427 4C17FZ38 P1102-48 13 8.8 525 14.17 12.67 S, US
X-Ref / Index
Tech Information
Three Phase - 230/460 Volt - TEFC - P1100 Series
Dimensions
F.L. Gearmotor F.L. (inches)
Stock
Output Torque Input Catalog List Type & Ratio Amps Overhung
RPM (Lb.In.) HP Number Price Model Number Frame to 1 @230V Load (lb.) XL XH Notes
18 1089 1⁄3 107025.00 √ 1,421 4T17FZ47 P1103-48 95 1.6 700 12.92 11.42 S, US
Warnings/Cautions
26 752 1⁄3 107026.00 √ 1,421 4T17FZ53 P1103-48 66 1.6 650 12.92 11.42 S, US
41 461 1⁄3 107027.00 √ 1,389 4T17FZ54 P1102-48 42 1.6 650 12.92 11.42 S, US
59 330 1⁄3 107028.00 √ 1,389 4T17FZ55 P1102-48 29 1.6 625 12.92 11.42 S, US
91 224 1⁄3 107029.00 √ 1,389 4T17FZ56 P1102-48 19 1.6 575 12.92 11.42 S, US
157 125 1⁄3 107030.00 √ 1,389 4T17FZ57 P1102-48 11 1.6 500 12.92 11.42 S, US
288 70 1⁄3 107031.00 √ 1,389 4T17FZ58 P1102-48 6 1.6 400 12.92 11.42 S, US
22 1105 1⁄2 107032.00 √ 1,499 4T17FZ48 P1103-48 79 2.0 700 13.42 11.92 S, US
41 700 1⁄2 107033.00 √ 1,477 4T17FZ49 P1102-48 42 2.0 650 13.42 11.92 S, US
59 496 1⁄2 107034.00 √ 1,477 4T17FZ50 P1102-48 29 2.0 625 13.42 11.92 S, US
91 336 1⁄2 107035.00 √ 1,477 4T17FZ51 P1102-48 19 2.0 575 13.42 11.92 S, US
133 229 1⁄2 107036.00 √ 1,477 4T17FZ52 P1102-48 13 2.0 500 13.42 11.92 S, US
288 100 1⁄2 107037.00 √ 1,477 4T17FZ46 P1102-48 6 2.0 400 13.42 11.92 S, US
Note listing on inside back flap
Specifications are subject to change without notice
355
Gearmotors Gearmotors
Right-Angle - AC Gearmotors
Features:
• Permanent split capacitor design rated for 115/230VAC 60/50 HZ input
• Worm-type right-angle gearing features hardened, steel worm with bronze worm wheel
for long life and quiet operation
• Precision machined aluminum gear housing
Accessories / Kits
Application Notes:
Options
• Placing a motor below the gearmotor should be avoided to prevent leakage of lubricant
into the motor should the motor shaft seal fail. For other mountings, the breather plug
must be reoriented by using a 90 deg 1/8” NPT taper pipe elbow.
Regal does not offer this elbow. It is not recommended to place the gearmotor with the
gearbox shaft up.
• Placing the gearmotor with the motor below the gearbox should be avoided to prevent
X-Ref / Index
leakage of lubricant into the motor should the motor shaft seal fail
• Overhung load capacities shown are at center of output shaft
• Continuous duty run capacitor supplied as standard
• Bodine®/Dayton® direct interchange
Tech Information
put (Lb. Input Catalog List Model Type & Ratio Amps Load Mfd. 240
RPM In.) HP Number Price Number Frame to 1 @115V (lb.) P X XL XH VAC Notes
28 37 1⁄15 M1125080.00 √ 812 M31P17NZ19 10F60-31C 60 0.9 185 3.07 3.63 8.94 5.31 10.0¤ S, US, 12
43 34 1⁄15 M1125081.00 √ 812 M31P17NZ18 10F40-31C 40 0.9 185 3.07 3.63 8.94 5.31 10.0¤ S, US, 12
Warnings/Cautions
58 40 1⁄15 M1125082.00 C/A 812 M31P17NZ17 10F30-31C 30 0.9 185 3.07 3.63 8.94 5.31 10.0¤ S, US, 12
85 24 1⁄15 M1125083.00 √ 812 M31P17NZ16 10F20-31C 20 0.9 185 3.07 3.63 8.94 5.31 10.0¤ S, US, 12
173 14 1⁄15 M1125084.00 √ 812 M31P17NZ15 10F10-31C 10 0.9 185 3.07 3.63 8.94 5.31 10.0¤ S, US, 12
29 110 1⁄6 M1145037.00 √ 1,101 M38P17FZ16 13F60-38F 60 2.0 235 3.85 4.5 12.31 7.81 15.0¢ S, US, 13
43 113 1⁄6 M1145038.00 √ 1,101 M38P17FZ17 13F40-38F 40 2.0 235 3.85 4.5 12.31 7.81 15.0¢ S, US, 13
57 95 1⁄6 M1145082.00 C/A 1,151 M38P17FZ23 13F30-38F 30 2.0 235 3.85 4.5 12.31 7.81 15.0¢ S, US, 13
83 75 1⁄6 M1145039.00 √ 1,101 M38P17FZ18 13F20-38F 20 2.0 235 3.85 4.5 12.31 7.81 15.0¢ S, US, 13
170 43 1⁄6 M1145040.00 √ 1,101 M38P17FZ19 13F10-38F 10 2.0 235 3.85 4.5 12.31 7.81 15.0¢ S, US, 13
340 23 1⁄6 M1145041.00 √ 1,101 M38P17FZ20 13F05-38F 5 2.0 235 3.85 4.5 12.31 7.81 15.0¢ S, US, 13
¤ 250 VAC Note listing on inside back flap
¢ 300 VAC Specifications are subject to change without notice
C/A - Check Availability
Note 12 - TENV
Note 13 - TEFC
Gearmotors
IP55 AC Washguard® Gearmotors
Right-Angle - Single & Three Phase
AC / DC Controls
General Specifications:
Single and three-phase washdown duty gearmotors rated for continuous duty applications. Permanent
split designed single-phase motors include capacitor in conduit box. Motors are designed for extended
life in applications requiring regular washdown or otherwise wet environments. It is not recommended to
place the gearmotor with the gearbox shaft up.
Features:
Accessories / Kits
• Shaft material is coated with Teflon®/Ceramic plating
• White epoxy painted motors
• O-rings and gaskets used for sealing
• Hardened worm-type gearing used
• Interior components protected against corrosion
• Ball bearings used in gear housing
• Sealed output shafts
Mods / Factory
• Output shafts have needle bearings for high load capacities
Options
• UL listed and CSA certified
X-Ref / Index
F.L.
F.L.
Stock
Tech Information
172 105 3/8 M1145147.00 √ 1,463 M38T17FZ23 10 230 1.3 3 235
Specifications are subject to change without notice
Warnings/Cautions
357
Teflon is a trademark or trade name ofThe Chemours Company.
and is not owned or controlled by Regal Beloit Corporation.
Gearmotors Gearmotors
SUB-FHP Accessories
Dimensions (inches)
List
Catalog Number Frame Price A B C K
Accessories / Kits
Note: * For any gearmotor catalog number beginning with M1115XXX, must
clarify from gearmotor type and frame columns as listed on the respective
pages for that gearmotor type. For example, if gearmotor type and frame lists
Mods / Factory
P303-30E, then use the 30 frame conduit box kit M1760021.00. If gearmotor
type and frame lists 10F60-25, then use conduit box kit M1760000.00.
Options
M1760007.00
&
M1760021.00
X-Ref / Index
Dimensions (inches)
Warnings/Cautions
List
Catalog Number Frame Price A B C 1D1 1D2 1D3 X BA F E
M1760003.00 PZ Gearmotors 65 3.75 4.5 3.94 3 2.3 1.5 2.6 1.5 1.88 3.75
M1760011.00** PE350 Gearmotors 78 4.50 6 5.52 4 3.1 2.2 3.6 1.5 2.50 5.00
M1760029.00Δ PE350 Gearmotors 82 4.50 6 5.52 4 3.1 2.2 3.6 1.5 2.50 5.00
*Maximum radial load no greater than 50 lbs. This bracket can also be Specifications are subject to change without notice
used on DC motors in the 34 frame having the style C mounting.
**Maximum radial load no greater than 200 lbs.
Δ Washguard PE350 L-Bracket
358
Gearmotors
Gearmotors
Capacitors
AC / DC Controls
MFD Rating Voltage Rating Catalog Number List Price W H T D
10 250 003043.05 59 1.89 1.14 0.75 1.14
15 300 003042.05 66 2.28 1.61 1.14 2.48
Accessories / Kits
Dimensions (inches)
Gearmotor Type MFD Rating Voltage Rating Catalog Number List Price W H T D
P240 7 1/2 250 003042.02 66 1.89 1.14 0.75 2.01
PE350 10 250 003042.06 59 1.89 1.24 0.89 2.11
P240 15 300 003042.05 66 2.28 1.61 1.14 2.48
Mods / Factory
PE350 15 250 003042.04 77 2.28 1.46 0.93 2.33
Options
For SUB-FHP AC PZ Series Gearmotors
Dimensions (inches)
X-Ref / Index
MFD Rating Voltage Rating Catalog Number List Price W H T D
3 250 003043.01 66 1.22 0.93 0.57 0.97
10 250 003043.05 59 1.89 1.14 0.75 1.14
Tech Information
Warnings/Cautions
003042 003043
359
Gearmotors Gearmotors
Inverter Rated - PZ Series and P240 Series - AC Gearmotors
induced by variable frequency drives range from the printed gearmotor RPM
• Double shielded motor ball bearings • Placing the gearmotor with the motor below the
• Needle bearings in the parallel shaft gearboxes gearbox should be avoided to prevent leakage
• Ball bearings in the right angle (worm) gearboxes of lubricant into the motor should the motor
• Steel conduit box provided as standard shaft seal fail
• Finished in high gloss hardened black enamel paint • Overhung load capacities shown are at center
of output shaft
Accessories / Kits
pz SERIES – AZ
"XL"
5.30
"XH" 1.560
3.75
3.13 "X" 1.00 .125 SQ. KEY
2.645
1.13
NAMEPLATE MOTOR LEADS
.78 6.00 LONG MIN.
TOP
.574
ÿ.500 .499
REF
.90
FLAT
.457
2.645
3.97 REF
2.63
3.75
"P"
3.00
Mods / Factory
Options
1.875
"L" BRACKET 1.875 1.50
(OPTIONAL) 3.75
Stock
put (Lb. Input Catalog List Type & Ratio Amps Load
RPM In.) HP Number Price Model Number Frame to 1 @230V (lb.) P X XL XH Notes
19 100 1⁄15 M1125282.00 C/A 869 M31T17NZ26 PZ4-31 90 0.4 155 3.07 3.23 10.83 9.27 S, US
57 56 1⁄15 M1125283.00 √ 785 M31T17NZ27 PZ3-31 30 0.4 155 3.07 2.43 10.03 8.47 S, US
142 24 1⁄15 M1125284.00 √ 722 M31T17NZ28 PZ2-31 12 0.4 155 3.07 2.13 9.73 8.17 S, US
283 12 1⁄15 M1125285.00 √ 722 M31T17NZ29 PZ2-31 6 0.4 155 3.07 2.13 9.73 8.17 S, US
C/A - Check Availability Note listing on inside back flap
Tech Information
.672
Warnings/Cautions
Ø.625 .624
4.75
2.75
3.375
5.13
3.000
3.125
3.51
put (Lb. Input Catalog List Type & Ratio Amps Load
RPM In.) HP Number Price Model Number Frame to 1 @230V (lb.) P X XL XH Notes
16 391 1⁄6 M1145122.00 √ 880 M38T17FZ12 P243-38 103 0.7 237 4.43 3.5 11.63 10.13 S, US
30 295 1⁄6 M1145123.00 √ 880 M38T17FZ14 P243-38 58 0.7 237 4.43 3.5 11.63 10.13 S, US
60 157 1⁄6 M1145124.00 √ 813 M38T17FZ15 P242-38 29 0.7 237 4.43 3.5 11.63 10.13 S, US
90 103 1⁄6 M1145125.00 √ 813 M38T17FZ16 P242-38 19 0.7 237 4.43 3.5 11.63 10.13 S, US
156 60 1⁄6 M1145126.00 √ 813 M38T17FZ17 P242-38 10,6 0.7 237 4.43 3.5 11.63 10.13 S, US
360
Gearmotors
Gearmotors
PE350 Series
5.125 BC
AC / DC Controls
Accessories / Kits
Three Phase - 230-460 Volt - TEFC - PE350 Series
F.L. Gear- Over- Dimensions (inches)
Out- Torque motor F.L. hung
Stock
put (Lb. Input Catalog List Type & Ratio Amps Load
RPM In.) HP Number Price Model Number Frame to 1 @230V (lb.) P X XL XH Notes
9 341 1⁄6 096065.00 √ 861 C42T17FZ34 PE353-42 180 1.0 327 5.16 3.32 12.57 10.57 S, US
29 300 1⁄4 096066.00 √ 868 C42T17FZ29 PE353-42 58 1.2 327 5.16 3.32 13.07 11.07 S, US
Mods / Factory
58 244 1⁄4 096067.00 √ 868 C42T17FZ30 PE353-42 30 1.2 327 5.16 3.32 13.07 11.07 S, US
Options
85 165 1⁄4 096068.00 √ 853 C42T17FZ31 PE352-42 20 1.2 327 5.16 3.32 13.07 11.07 S, US
173 92 1⁄4 096069.00 √ 853 C42T17FZ32 PE352-42 10 1.2 327 5.16 3.32 13.07 11.07 S, US
325 50 1⁄4 096070.00 √ 853 C42T17FZ33 PE352-42 5 1.2 327 5.16 3.32 13.07 11.07 S, US
Note listing on inside back flap
Specifications are subject to change without notice
13 SERIES – AC
X-Ref / Index
"XL" 5.81
"P" DIA.
MOTOR LEADS "XH" "X" 4.38
6.00 LG MIN 4.75 2.74
TOP
5.20 MAX
2.75
1.50
1.333
FLAT
1.670
1.80
FLAT
.593
.187 SQ KEY
1.00 LG
.31 Ø.625 3.84
Tech Information
TYP MAX
3.88 3.30
MAX
"Z" "Z"
3.250
1.625
1.500
ALL DIMENSIONS IN INCHES
3.000
VIEW Z-Z
Warnings/Cautions
Three Phase - 230 Volt - TEFC - Right-Angle Series
F.L. Gear- Over- Dimensions (inches)
Out- Torque motor F.L. hung
Stock
put (Lb. Input Catalog List Type & Ratio Amps Load
RPM In.) HP Number Price Model Number Frame to 1 @230V (lb.) P X XL XH Notes
29 238 3⁄8 M1145127.00 √ 1,042 M38T17FZ7 13F60-38 60 1.3 235 4.43 4.5 12.31 7.81 S, US
43 228 3⁄8 M1145128.00 √ 1,042 M38T17FZ8 13F40-38 40 1.3 235 4.43 4.5 12.31 7.81 S, US
86 138 3⁄8 M1145129.00 √ 1,042 M38T17FZ9 13F20-38 20 1.3 235 4.43 4.5 12.31 7.81 S, US
172 105 3⁄8 M1145130.00 √ 1,042 M38T17FZ10 13F10-38 10 1.3 235 4.43 4.5 12.31 7.81 S, US
345 54 3⁄8 M1145131.00 √ 1,042 M38T17FZ11 13F05-38 5 1.3 235 4.43 4.5 12.31 7.81 S, US
Note listing on inside back flap
Specifications are subject to change without notice
361
Gearmotors AC / DC Controls
Quick Reference
AC / DC Controls
SM2/SM4
Speedmaster sensorless vector drives with “big drive”
Series Flux
features and ultra-compact size. SM2 - 1/2 through
Vector
25 HP. IP31 enclosure — NEMA 1 Type. SM4 - 1/2
Sub-Micro
X-Ref / Index
Gearmotors
LEESON® Speedmaster® inverters are feature rich controls offering great process control and operating
efficiency for your AC Motors. With our broad family of controls, we have the solution for your application
needs at a competitive price.
AC / DC Controls
Accessories / Kits
Platinum eTM
Basic Features Micro Series SM-Basic SM-Plus SM2 Vector SM4 Vector Platinum VSD VSD - Plus
Enclosure Type IP31 & IP65/54 IP20 IP20 IP31 IP65 IP21 IP21
Enclosure Material Steel Plastic Plastic Plastic Plastic Plastic Plastic
Number Pre-set Speeds 4 7 7 8 8 16 16
Washdown Duty Yes No No No Yes No No
FWD & REV Yes Yes Yes Yes Yes Yes Yes
Mods / Factory
Password Protected Yes Yes Yes Yes Yes Yes Yes
Options
Dynamic Brake Kits Yes Yes Yes No No No Yes
Relays Yes Yes Yes Yes Yes Yes Yes
EPM Programmable No Yes Yes Yes Yes Yes Yes
Open Loop Vector No No No Yes Yes Yes Yes
Closed Loop Vector No No No No No No Yes
PMAC Motor Control No No No No No Yes Yes
PID Software Yes No No Yes Yes Yes No
X-Ref / Index
Remote Keypads Yes Yes Yes Yes Yes Yes Yes
Slip Compensation Yes Yes Yes Yes Yes Yes Yes
Speed Reference Signals Yes Yes Yes Yes Yes Yes Yes
Display - Words or Codes Words 3 - digit 3- digit 4 - digit 4 - digit Words & Codes Words & Codes
Adjustable Carrier Frequency 2.5 - 14 kHz 4 - 10 kHz 4 - 10 kHz 4 - 10 kHz 4 - 10 kHz 2 - 16 kHz 2 - 16 kHz
DC Braking Yes Yes Yes Yes Yes Yes Yes
Fault History Yes Yes Yes Yes Yes Yes Yes
Tech Information
Max. HP @ 460 Volts 150 15 30 60 30 3 30
Max. HP @ 230 Volts 60 15 20 20 20 3 3
1 Phase Input / 3 Phase Output Yes Yes Yes Yes Yes Yes Yes
Output Frequency 120 240 Hz 240 Hz 500 Hz 500 Hz 599 Hz 599 Hz
Warnings/Cautions
363
Gearmotors AC / DC Controls
DC Adjustable Speed Drives
SCR Thyristor Controls
Regenerative Controls
Options
General Specifications:
• Four quadrant controls for precise motion control
• NEMA 4X or chassis style
• Motoring and braking torque regulation ¼ HP through 2 HP
X-Ref / Index
See footnotes on page 365 Specifications are subject to change without notice
Gearmotors
SCR Thyristor Controls
AC / DC Controls
SCR Controls - Open Chassis
HP Range
Accessories / Kits
Chassis Heat Sink ◘ 174314.00 85 — — — 1
Mods / Factory
HP Range
Options
Catalogue App. Wgt.
Description Number List Price Output Amps 115V 230V (lbs.)
NEMA 4X Washdown ♠ 175720.00 1,472 10 1/4 to 1 1/2 to 2 8
Open Chassis with Speed Pot ♠ 175721.00 950 10 1/4 to 1 1/2 to 2 2
Chassis Heat Sink 175722.00 165 — — — 2
Specifications are subject to change without notice.
X-Ref / Index
For Subfractional HP Motors & Gearmotors
PWM Controls - Enclosed - Single Phase Input 50/60 Hz
HP Range
Tech Information
Catalogue Output App. Wgt.
Description Number List Price Amps 115V 230V (lbs.)
NEMA 1 General Purpose
—SCR Non-Reversing M1740005.00 495 3 1/40 to 1/8 1/40 to 1/4 5
—SCR Reversing With Dynamic Braking M1740006.00 668 3 1/40 to 1/8 1/40 to 1/4 5
—PWM Non-Reversing M1740008.00 430 3 1/40 to 1/8 1/40 to 1/4 2
Warnings/Cautions
PWM & SCR Controls - Open Chassis
HP Range
* Drive does not have dynamic braking. Motor shaft must be at zero speed before reversing.
Δ Heat sink #174316 is required for NEMA 1 type 3/4 and 1HP 115V and 11/2 and 2HP 230V when the amp draw of the motor
exceeds 5 amps.
◘ Chassis Heat Sink #HSK-0001 required for 3/4 and 1HP 115V and 1-1/2 and 2HP 230V when the amp draw of the motor
exceeds 5 amps.
▼ Chassis Heat sink #HSK-0004 required for 1HP and above when the amp draw of the motor exceeds 5 amps.
♠ Regenerative drives are reversible and have regenerative braking.
Specifications are subject to change without notice.
365
Gearmotors AC / DC Controls
DC Adjustable Speed Drives NEW!
SCR - 4 Quadrant - Chassis - Regenerative Controls
Features:
• Industry standard footprint - Allows for replacing competitive drives
AC / DC Controls
Specifications:
• AC Line Voltage: 115 / 230 VAC, ±10%, 50/60 Hz, 1Ø
• Field Voltage with 115 VAC Line (230 VAC Line):
50/100 (100/200) VDC
• Maximum Field Amperage: 0.74 Amps
• Acceleration Time Range: 0.1 - 15 seconds
Mods / Factory
HP Range Field /
Maximum Input Output Shunt
Catalog Current Voltage Voltage Supply
Number Enclosure List Price (ADC) (VDC) (VDC) HP (VDC) Braking Reversing Isolation
115 0-90 1/50 - 1/8
YES YES
174062.00 Chassis 444 1.5 0-90 1/50 - 1/8 YES YES
230 Regenerative Regenerative
Warnings/Cautions
366
NEW! AC / DC Controls
Gearmotors
DC Adjustable Speed Drives
SCR - 4 Quadrant - Chassis - Regenerative Controls
Features:
• Industry standard footprint - Allows for replacing competitive drives
AC / DC Controls
• Microprocessor-based design - Allows for customer programming
• Fully regenerative - 4-Quadrant allows for quick braking
• Torque mode - Can be used for speed control or torque control
• Stopping modes - Inhibit (braking) can be used for N.O. or N.C. operation
• Can be used for frequent starting and stopping
• Bidirectional (Wigwag) mode - Can be set so that the potentiometer determines both speed and direction
Accessories / Kits
Specifications:
• AC Line Voltage: 115 / 230 VAC, ±10%, 50/60 Hz, 1Ø
• Acceleration Time Range: 0.5 - 20 seconds
• Deceleration Time Range: 0.5 - 20 seconds
• Analog Signal Range: 0 ± 10 VDC
Mods / Factory
• Input Impedance (COM to SIG1): >100K Ω
Options
• Form Factor: 1.37 at base speed
• Load Regulation: 1.0% of base speed or better
• Speed Range 50:1
• Ambient Temperature Range: 10°C - 50°C
X-Ref / Index
HP Range Field /
Maximum Input Output Shunt
Catalog Current Voltage Voltage Supply
Number Enclosure List Price (ADC) (VDC) (VDC) HP (VDC) Braking Reversing Isolation
115 0-90 1/50 - 1/8
YES YES
174065.00 Chassis 288 1.5 0-90 1/50 - 1/8 NO NO
230 Regenerative Regenerative
Tech Information
0-180 1/25 - 1/4
115 0-90 1/8 - 1
YES YES
174066.00 Chassis 288 11* 0-90 1/8 - 1 NO NO
230 Regenerative Regenerative
1/4 - 2
* Heat sink kit 174314.00 mus tbe used when the continuous output current is above 8 amps.
Warnings/Cautions
367
Gearmotors AC / DC Controls
DC Adjustable Speed Drives - SCR Controls
15 Series
General Specifications:
AC / DC Controls
HP Range
Catalog App. Wgt.
Description Number List Price Output Amps 115V 230V (lbs.)
NEMA® 4/12 Non-Reversing 174696.00 334 3 1/3 2/3 1
Chassis - Figure 1 174695.00 192 2 1/6 1/6 1
Chassis - Figure 2 174694.00 192 2 1/6 1/6 1
Mods / Factory
General Specifications:
X-Ref / Index
Features:
• 40:1 speed range
• Holds speed control as battery discharges
• Adjustable min. and max. speeds
• IR compensation
• 200% current limit overload protection
Warnings/Cautions
Gearmotors
Low Voltage Adjustable Speed Controllers
General Specifications:
• Chassis type design
• DC input / DC output
• Speed potentiometer shipped loose
• High efficient designs increase battery life
AC / DC Controls
Features:
• Sleep mode feature
• Accepts switch closure for reversing and braking
• Built-in short circuit protection
• 1.01 Form factor
Accessories / Kits
• Built-in temperature sensor
• On board trim pots for calibration, speed and forward and reverse settings
Mods / Factory
Catalog App. Wgt.
Options
Input Voltage Number List Price Output Amps Length Width Height (lbs.)
12/24 174298.00 1,335 120 6.90 5.00 2.50 3
36/48 174299.00 1,335 100 6.90 5.00 2.50 3
Specifications are subject to change without notice
X-Ref / Index
Dual Mode - Dual Speed Controllers
Tech Information
• Dual voltage, 115-230 VAC input with jumper
• Selectable 90/180 VDC output
• Jumper selectable speed and torque mode
• Two trim pots each for the minimum speed, maximum speed,
IR compensation, current limit and acceleration/deceleration
• Comes standard with two potentiometers
Warnings/Cautions
HP Input Voltage Output Amps Output Voltage Catalog Number List Price App. Wgt. (lbs)
1 HP @ 90 VDC
115/230 10* 0-90/0-180 174422.00 444 3
2 HP @ 180 VDC
* Heat sink 174314.00 is required if one side provides more than 5A or the output on both sides is more than 6.5A.
Specifications are subject to change without notice
Control Accessories
Catalog
Description Number List Price
Inhibit Plug 900282.01 58
Speed Pot (10k/5w pot, washers & nut) 006708.01 74
Specifications are subject to change without notice
369
Gearmotors AC / DC Controls
FHPTM Series AC Controls
AC Adjustable Speed Drives
General Specifications:
The FHP Series volts/hertz-type AC drives are as simple to set-up
AC / DC Controls
Features:
Common features for chassis and enclosed units:
• Compact size – (4.30” x 3.70”)
Accessories / Kits
• Output voltage on dual voltage models is jumper selectable and has voltage doubler
• Acceleration and deceleration trim pots
• Torque, maximum speed and torque limit trim pots
• Torque ‘foldback’ feature – Allows up to 200% torque for short periods
• 16kHz switching frequency, with option to change between 4 and 16kHz
• Adjustable torque boost for startup – Up to 200%
• Color-coded on-board LEDs for power, fault and torque limit
Mods / Factory
• Easy start/stop and direction control with enable and direction terminal connections
Options
• NEMA® 4X enclosure
• Jumper selectable DC injection braking or coast to stop
• Brake time and current are adjustable
• Built-in isolation card to accept a speed reference signal
• Min speed adjustment
• Auto or manual restart after power loss
Tech Information
* Plug-in capacitor kit (175325.00) for field adjustments to less than 16khz
‡ Faults are Over-voltage, Under-voltage and Instantaneous Over Current trip
Gearmotors
FHPTM Series AC Drives - Chassis Mount
AC / DC Controls
Single Phase Input / Single or Three Phase Output
HP Input Voltage Output Amps Output Voltage Catalog Number List Price App. Wgt. (lbs)
1/4 115 2.4 115 175320.00 453 3
Accessories / Kits
1/2 230 2.4 230 175321.00 453 3
1/2 115/230 2.4 230 175310.00 575 3
1/2 115 4.0 115 175322.00 563 4
1 230 4.0 230 175323.00 557 4
1 115/230 4.0 230 175311.00 729 4
Mods / Factory
FHP Series AC Drives - Accessories
Options
Catalog App. Wgt.
Description Number List Price (lbs)
Process Control Module (PCM) Kit* 175324.00 140 2
Carrier Frequency Capacitor Kit 175325.00 34 1
* PCM Kit is for use with chassis drives only.
X-Ref / Index
Specifications are subject to change without notice
AC / DC Controls
FHP Series AC Drives - NEMA 4X (IP65)
Tech Information
• NEMA® 4X enclosure
• Min speed adjustment
• Jumper selectable features:
– DC injection braking or coast to stop
– Brake time and current are adjustable
Warnings/Cautions
– Auto or manual restart after power loss
• Built-in isolation card to accept a speed reference signal
HP Input Voltage Output Amps Output Voltage Catalog Number List Price App. Wgt. (lbs)
1/6 - 1 115/230 4.0 230 175326.00 1,025 7
Specifications are subject to change without notice
Discontinued Once
IP20 Enclosure Protection Stock is Depleted
see page 376-377 for cross to
SM2 Series as a replacement
AC / DC Controls
Features:
• Removable electronic programming module
• Input line voltage calibration—optimizes over and under voltage trip levels
• Current limit to 180% with frequency foldback
• Adjustable carrier frequency (4 to 10 kHz)
• Adjustable V/Hz
• Output frequency to 240 Hz
Mods / Factory
• Password protection
• Fault history: Stores eight previous trips
• Terminal status indication
• Default parameter reset
• IP20 enclosure with finger safe terminals
• Dynamic braking and remote keypad kits available on page 394
Warnings/Cautions
372
AC / DC Controls
Gearmotors
SM Series Sub-Micro AC Inverters
IP20 Enclosure Protection
AC / DC Controls
Output Input
Voltage HP Amps Voltage◘ Catalog Number List Price Stock App. Wgt. (lbs) Dimension Key
110-120 Volts 1/3 1.7 110-120 174263.00 558 D 2 A5
1/2 2.4 110-120 174264.00 606 D 2 A5
1 4.2 110-120 174265.00 804 D 3 B5
Accessories / Kits
1 1/2 6.0 110-120 174266.00 913 D 3 B5
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
D - Item to be discontinued after stock is depleted.
Mods / Factory
Options
Output Input
Voltage HP Amps Voltage◘ Catalog Number List Price Stock App. Wgt. (lbs) Dimension Key
200-240 Volts 1/3 1.7 200-240 174267.00 516 D 2 A5
1/2 2.4 200-240 174268.00 544 D 2 A5
1 4.2 200-240 174270.00 606 D 3 A6
1 1/2 6.0 200-240 174271.00 729 D 4 B5
X-Ref / Index
2 7.0 200-240 174272.00 859 D 5 B5
3 9.6 200-240 174273.00 1,008 D 5 B6
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
D - Item to be discontinued after stock is depleted.
Tech Information
Output Input
Voltage HP Amps Voltage◘ Catalog Number List Price Stock App. Wgt. (lbs) Dimension Key
200-240 Volts 1/2 2.4 200-240 174274.00 516 D 2 A5
1 4.2 200-240 174276.00 573 D 2 A6
1 1/2 6.0 200-240 174277.00 682 D 3 A7
Warnings/Cautions
2 7.0 200-240 174278.00 778 D 3 A7
3 9.6 200-240 174279.00 862 D 3 B6
5 15.2 200-240 174288.00 1,099 D 5 B2
7 1/2 22.0 200-240 174280.00 1,519 D 8 C1
10 28.0 200-240 174290.00 1,544 D 8 C1
15 42.0 200-240 174292.00 2,777 D 14 D1
400-480 Volts 1/2 1.1 400-480 174281.00 692 D 2 A1
1 2.1 400-480 174282.00 739 D 3 A2
1 1/2 3.0 400-480 174283.00 802 D 3 A3
2 3.4 400-480 174284.00 858 D 4 A3
3 4.8 400-480 174286.00 938 D 4 B1
5 7.8 400-480 174287.00 1,124 D 5 B2
7 1/2 11.0 400-480 174285.00 1,459 D 5 B2
10 14.0 400-480 174291.00 1,738 D 8 C1
15 21.0 400-480 174293.00 2,054 D 8 C1
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
D - Item to be discontinued after stock is depleted. Dimension Table see page 387
373
Gearmotors AC / DC Controls
SM Plus Sub-Micro AC Inverters
Discontinued Once
IP20 Enclosure Protection Stock is Depleted
see page 376-377 for cross to
SM2 Series as a replacement
General Specifications:
AC / DC Controls
Features:
• Removable electronic programming module
• Input line voltage calibration—optimizes over and under voltage trip levels
Accessories / Kits
Output Input
Voltage HP Amps Voltage◘ Catalog Number List Price Stock App. Wgt. (lbs) Dimension Key
115/230 Volts 1 4.2 115/230 174492.00 1,145 D 4 B1
1 1/2 6.0 115/230 174445.00 1,291 D 5 B1
◘ User programmable for 50Hz and other voltage inputs. Specifications are subject to change without notice
374
Modbus is believed to be the trademark of Schneider Electric,
and are not owned or controlled by Regal Beloit Corporation.
AC / DC Controls
Gearmotors
SM Plus Sub-Micro AC Inverters
IP20 Enclosure Protection
AC / DC Controls
Output Input
Voltage HP Amps Voltage◘ Catalog Number List Price Stock App. Wgt. (lbs) Dimension Key
200-240 Volts 1/4 1.4 200-240 174452.00 821 D 2 A1
1/2 2.2 200-240 174453.00 858 D 2 A1
1 4.2 200-240 174454.00 920 D 3 A2
1 1/2 6.0 200-240 174493.00 1,096 D 4 B1
Accessories / Kits
2 6.8 200-240 174494.00 1,211 D 5 B2
3 9.6 200-240 174495.00 1,468 D 5 B2
5 15.2 200-240 174444.00 2,015 D 8 C1
◘ User programmable for 50Hz and other voltage inputs
Specifications are subject to change without notice
D - Item to be discontinued after stock is depleted.
Mods / Factory
Options
Output Input
Voltage HP Amps Voltage◘ Catalog Number List Price Stock App. Wgt. (lbs) Dimension Key
200-240 Volts 1 4.2 200-240 174455.00 848 D 3 A2
1 1/2 6.0 200-240 174456.00 995 D 3 A3
2 6.8 200-240 174457.00 1,100 D 4 A3
3 9.6 200-240 174458.00 1,311 D 4 A3
X-Ref / Index
5 15.2 200-240 174446.00 1,687 D 4 B2
7 1/2 22.0 200-240 174438.00 2,307 D 8 C1
10 28.0 200-240 174439.00 2,754 D 8 C1
15 42.0 200-240 174429.00 3,567 D 13 D1
20 54.0 200-240 174430.00 4,375 D 14 D1
Tech Information
400-480 Volts 1/2 1.1 400-480 174459.00 955 D 2 A1
1 2.1 400-480 174460.00 1,028 D 3 A2
1 1/2 3.0 400-480 174461.00 1,125 D 3 A3
2 3.4 400-480 174462.00 1,240 D 4 A3
3 4.8 400-480 174463.00 1,385 D 4 A3
5 7.6 400-480 174447.00 1,765 D 5 B2
Warnings/Cautions
7 1/2 11.0 400-480 174440.00 2,307 D 8 C1
10 14.0 400-480 174441.00 2,754 D 8 C1
15 21.0 400-480 174431.00 3,497 D 13 D1
20 27.0 400-480 174432.00 4,283 D 14 D1
25 34.0 400-480 174433.00 5,097 D 14 D1
30 40.0 400-480 174500.00 5,924 D 14 D1
480-590 Volts 1 1.7 480-590 174464.00 1,100 D 3 A2
2 3.0 480-590 174491.00 1,317 D 4 A3
3 4.2 480-590 174497.00 1,564 D 5 B2
5 6.6 480-590 174448.00 1,915 D 5 B2
7 1/2 9.9 480-590 174442.00 2,485 D 8 C1
10 12.2 480-590 174443.00 2,945 D 8 C1
15 19.0 480-590 174434.00 3,858 D 8 D1
20 24.0 480-590 174435.00 4,717 D 14 D1
25 27.0 480-590 174436.00 5,581 D 14 D1
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
Dimension Table see page 386
375
Gearmotors AC / DC Controls
SM and SM-Plus Series Replacement Chart
The SM Series and SM-Plus Series of variable frequency drives are being discontinued. The tables below
will assist to find an upgraded replacement. The replacement SM2 Series offers additional or upgraded
features including:
AC / DC Controls
SM SERIES SUB-MICRO VFD IP20 Rated REPLACEMENT SM2 VFD IP31 Rated
Options
Height
Height
inches
inches
inches
inches
inches
inches
Width
Depth
Width
Depth
SM Series SM2
Catalog # Description Catalog # Description
174286.00 4.52 5.74 5.46 3PH.3HP.400-480V 174624.00 3.89 7.51 5.42 440/480V 2.2kW 3Ph N1
174287.00 4.52 5.74 6.72 3PH.5HP.400-480V 174625.00 3.89 7.51 5.78 400/480V 4kW 3Ph N1
X-Ref / Index
174267.00 3.69 5.74 3.26 1 OR 3PH.1/3HP.208/240V 174606.00 3.89 7.47 4.36 200/240V 0.25kW 1P N1
174274.00 3.69 5.74 3.26 3PH.1/2HP.208/240V 174607.00 3.89 7.47 4.36 240V 0.37kW 1&3Ph N1
174268.00 3.69 5.74 3.26 1 OR 3PH.1/2HP.208/240V 174607.00 3.89 7.47 4.36 240V 0.37kW 1&3Ph N1
174276.00 3.69 5.74 3.62 3PH.1HP.208/240V 174608.00 3.89 7.47 4.36 240V 0.75kW 1&3Ph N1
174270.00 3.69 5.74 3.62 1PH IN/3PH OUT.1HP.208/240V 174608.00 3.89 7.47 4.36 240V 0.75kW 1&3Ph N1
174271.00 4.56 5.74 4.87 1 OR 3PH.1.5HP.208/240V 174609.00 3.89 7.51 5.42 200/240V 1.1kW 1&3P N1
Tech Information
174272.00 4.52 5.74 4.87 1 OR 3PH.2HP.208/240V 174610.00 3.89 7.51 5.42 240V 1.5kW 1&3Ph N1
174279.00 4.52 5.74 5.50 3PH.3HP.208/240V 174611.00 3.89 7.51 5.42 200/240V 2.2kW 3Ph N1
174273.00 4.52 5.74 5.50 1 OR 3PH.3HP.208/240V 174611.00 3.89 7.51 5.42 200/240V 2.2kW 1&3P N1
174288.00 4.52 5.74 6.72 3PH.5HP.208-240V 174615.00 3.89 7.51 5.78 200/240V 4kW 3Ph N1
174293.00 5.82 7.74 7.15 3 PH.15HP.400-480V 174628.00 6.92 12.50 8.06 400/4800V 11kW 3Ph N1
Warnings/Cautions
174285.00 4.52 5.74 6.72 3 PH.7.5HP.400-480V 174626.00 5.11 9.83 6.29 400/480V 5.5kW 3Ph N1
174291.00 6.2 7.5 4.3 3 PH.10HP.400-480V 174627.00 5.11 9.83 6.29 480V 7.5kW 3Ph N1
174265.00 3.89 7.51 5.78 1PH.1HP.110/120V 174605.00 3.89 7.47 4.36 120/240V 0.75kW 1Ph N1
174264.00 3.89 7.47 4.36 1PH.1/2HP.110/120V 174604.00 3.89 7.47 4.36 120/240V 0.37kW 1Ph N1
174263.00 3.89 7.47 4.36 1PH.1/3HP.110/120V 174603.00 3.89 7.47 4.36 120/240V 0.25kW 1Ph N1
174266.00 3.89 7.47 4.36 1PH.1.5HP.110/120V 174651.00 3.89 7.51 5.42 120V 1.1kW 1Ph N1
174277.00 3.89 7.51 5.78 3PH.1.5HP.208/240V 174609.00 3.89 7.51 5.42 200/240V 1.1kW 3Ph N1
174278.00 3.89 7.51 5.78 3PH.2HP.208/240V 174610.00 3.89 7.51 5.42 220/240V 1.5kW 3Ph N1
174292.00 5.11 9.83 6.29 3 PH.15HP.208-240V 174618.00 6.92 12.50 8.06 200/240V 11kW 3Ph N1
174280.00 3.89 7.47 4.36 3 PH.7.5HP.208-240V 174616.00 5.11 9.83 6.29 200/240V 5.5kW 3Ph N1
174284.00 3.89 7.47 4.36 3PH.2HP.400-480V 174623.00 3.89 7.51 5.42 400/480V 1.5kW 3Ph N1
174281.00 3.89 7.47 4.36 3PH.1/2HP.400-480V 174620.00 3.89 7.47 4.36 480V 0.37kW 3Ph N1
174282.00 5.11 9.83 6.29 3PH.1HP.400-480V 174621.00 3.89 7.47 4.36 440/480V 0.75kW 3Ph N1
174283.00 5.11 9.83 6.29 3PH.1.5HP.400-480V 174622.00 3.89 7.51 5.42 400/480V 1.1kW 3Ph N1
Gearmotors
SM and SM-Plus Series Replacement Chart
AC / DC Controls
SM-PLUS SUB-MICRO VFD IP20 Rated REPLACEMENT SM2 VFD IP31 Rated
Accessories / Kits
Height
Height
inches
inches
inches
inches
inches
inches
Width
Depth
Width
Depth
SM-PLUS SM2
Catalog # Description Catalog # Description
174492.00 6.92 12.50 8.06 1PH.1HP.115/230V 174605.00 3.89 7.47 4.36 120/240V 0.75kW 1Ph N1
174445.00 6.92 12.50 8.06 1PH.1.5HP.115/230V 174651.00 3.89 7.51 5.42 120V 1.1kW 1Ph N1
174453.00 6.92 12.50 8.06 1 or 3PH.1/2HP.200-230V 174607.00 3.89 7.47 4.36 240V 0.37kW 1&3Ph N1
174452.00 6.92 12.50 8.06 1 OR 3PH.1/4HP.200-230V 174607.00 3.89 7.47 4.36 240V 0.37kW 1&3Ph N1
174454.00 6.92 12.50 8.06 1 or 3PH.1HP.200-230V 174608.00 3.89 7.47 4.36 240V 0.75kW 1&3Ph N1
Mods / Factory
174493.00
Options
6.92 12.50 8.06 1 OR 3PH.1.5HP.200-230V 174609.00 3.89 7.51 5.42 200/240V 1.1kW 1&3P N1
174494.00 6.92 12.50 8.06 1 OR 3PH.2HP.200-230V 174610.00 3.89 7.51 5.42 240V 1.5kW 1&3Ph N1
174495.00 6.92 12.50 8.06 1 OR 3PH.3HP.200-230V 174611.00 3.89 7.51 5.42 200/240V 2.2kW 1&3P N1
174444.00 6.92 12.50 8.06 1 OR 3PH.5HP.200-230V No direct cross.
174435.00 3.89 7.51 5.42 3PH.20HP.550-575V 174638.00 6.92 12.50 8.06 600V 15kW 3Ph N1
174455.00 3.89 7.51 5.42 3PH.1HP.200-230V 174608.00 3.89 7.47 4.36 240V 0.75kW 1&3Ph N1
X-Ref / Index
174456.00 3.89 7.51 5.42 3PH.1.5HP.200-230V 174609.00 3.89 7.51 5.42 200/240V 1.1kW 3Ph N1
174457.00 3.89 7.51 5.42 3PH.2HP.200-230V 174610.00 3.89 7.51 5.42 220/240V 1.5kW 3Ph N1
174446.00 3.89 7.51 5.42 3PH.5HP.200-230V 174615.00 3.89 7.51 5.78 200/240V 4kW 3Ph N1
174429.00 3.89 7.51 5.42 3PH.15HP.200-230V 174618.00 6.92 12.50 8.06 200/240V 11kW 3Ph N1
174430.00 3.89 7.51 5.42 3PH.20HP.200-230V 174619.00 6.92 12.50 8.06 200/240V 15kW 3Ph N1
Tech Information
174458.00 3.89 7.51 5.42 3PH.3HP.200-230V 174611.00 3.89 7.51 5.42 200/240V 2.2kW 3Ph N1
174438.00 3.89 7.51 5.42 3PH.7.5HP.200-230V 174616.00 5.11 9.83 6.29 200/240V 5.5kW 3Ph N1
174439.00 3.89 7.51 5.42 3PH.10HP.200-230V 174617.00 5.11 9.83 6.29 240V 7.5kW 3Ph N1
174431.00 3.89 7.51 5.42 3PH.15HP.460-480V 174628.00 6.92 12.50 8.06 400/4800V 11kW 3Ph N1
174432.00 3.89 7.51 5.42 3PH.20HP.460-480V 174629.00 6.92 12.50 8.06 400/480V 15kW 3Ph N1
174434.00 3.89 7.47 4.36 3PH.15HP.550-575V 174637.00 6.92 12.50 8.06 600V 11kW 3Ph N1
Warnings/Cautions
174436.00 3.89 7.47 4.36 3PH.25HP.550-575V 174639.00 6.92 12.50 8.06 600V 18.5kW 3Ph N1
174433.00 3.89 7.47 4.36 3PH.25HP.460-480V 174630.00 6.92 12.50 8.06 400/480V 18.5kW 3Ph N1
174500.00 5.11 9.83 6.29 3 PH.30HP.460-480V 174991.00 6.92 12.50 8.06 400/480V 22kW 3Ph N1
174460.00 5.11 9.83 6.29 3PH.1HP.460-480V 174621.00 3.89 7.47 4.36 440/480V 0.75kW 3Ph N1
174462.00 5.11 9.83 6.29 3PH.2HP.460-480V 174623.00 3.89 7.51 5.42 400/480V 1.5kW 3Ph N1
174461.00 3.65 5.74 5.74 3PH.1.5HP.460-480V 174622.00 3.89 7.51 5.42 400/480V 1.1kW 3Ph N1
174459.00 3.65 5.74 3.93 3PH.1/2HP.460-480V 174620.00 3.89 7.47 4.36 480V 0.37kW 3Ph N1
174447.00 4.56 5.74 6.72 3PH.5HP.460-480V 174625.00 3.89 7.51 5.78 400/480V 4kW 3Ph N1
174448.00 4.56 5.74 6.72 3PH.5HP.550-575V 174634.00 3.89 7.51 5.78 600V 4kW 3Ph N1
174463.00 3.65 5.74 5.74 3PH.3HP.460-480V 174624.00 3.89 7.51 5.42 440/480V 2.2kW 3Ph N1
174464.00 3.65 5.74 4.72 3PH.1HP.550-575V 174631.00 3.89 7.47 4.36 600V 0.75kW 3Ph N1
174491.00 3.65 5.74 5.74 3PH.2HP.550-575V 174632.00 3.89 7.51 5.42 600V 1.5kW 3Ph N1
174497.00 4.56 5.74 6.72 3PH.3HP.550-575V 174633.00 3.89 7.51 5.42 600V 2.2kW 3Ph N1
174441.00 5.82 7.74 7.15 3PH.10HP.460-480V 174627.00 5.11 9.83 6.29 480V 7.5kW 3Ph N1
174440.00 5.82 7.74 7.15 3PH.7.5HP.460-480V 174626.00 5.11 9.83 6.29 400/480V 5.5kW 3Ph N1
174443.00 5.82 7.74 7.15 3PH.10HP.550-575V 174636.00 5.11 9.83 6.29 600V 7.5kW 3Ph N1
174442.00 5.82 7.74 7.15 3PH.7.5HP.550-575V 174635.00 5.11 9.83 6.29 600V 5.5kW 3Ph N1
377
Gearmotors AC / DC Controls
Micro Series Dimension Information
Micro Series
The Micro Series drive is RS-485, so a RS-232 to
RS-485 or USB to RS-485 converter is required.
The converter connects to the computer using a
standard serial or USB connection. A twisted pair
connects the converter to the drive.
Mods / Factory
Note: 3 Refer to the converter manufacturer’s instructions for proper converter configuration. The converter is not supplied by LEESON.
378
AC / DC Controls
Gearmotors
SM2 Series Flux Vector Series AC Inverters
NEMA® 1 IP31 Enclosure Protection
General Specifications:
• Designed to be used with vector duty rated AC motors
• Open loop flux vector designs
AC / DC Controls
• Typical applications would include: food processing, machinery, material handling and HVAC systems
• Enclosure: NEMA1, IP31, -10 to 55°C, 2.5% derate per °C above 40°C
Standard Features:
Easy Set-up and Operation: Program the vector control in one of four convenient ways:
• From the front of the drive
Accessories / Kits
• The optional remote keypad
• A PC using TechLink software
(Available free from www.leeson.com)
• The innovative EPM programmer
Modes of operation:
• Open loop flux vector (speed or torque)
Mods / Factory
• V/Hz (constant or variable)
Options
• Enhanced V/Hz with auto-tuning
X-Ref / Index
• Stop
• Forward/reverse
• Scroll up
• Scroll down
• Enter/mode
Tech Information
Vivid Illumination:
• 4 digit LED display
• Easy to read from a distance
• Movable decimal point
Acceleration/Deceleration Profiles:
Warnings/Cautions
• Two Independent accel ramps
• Two Independent decel ramps
• Linear or S-type
• Auxiliary ramp-to-stop
Output Frequency:
• 500 Hz Std., 1000 Hz optional
• Temperature (°C), 0-10 VDC input (user defined), 4-20 mA input (user defined) PID feedback (user
Options
defined), analog output (% load, % torque, kW), network speed (baud rate), terminal
continuity, keypad status
• Elapsed run time (hours), elapsed power on time (hours)
• Standards: UL (USA), cUL (Canada), CE (Europe), GOST (Russia/Ukraine) C-Tick (Australia/New Zealand)
X-Ref / Index
₤ LEESON® model 174606.00 is single-phase input only Specifications are subject to change without notice
◘ User programmable for 50Hz and other voltage inputs
Gearmotors
SM2 Series Flux Vector Series AC Inverters
NEMA® 1 IP31 Enclosure Protection
AC / DC Controls
Output Input Dimensions
Voltage HP Amps Voltage◘ Catalog Number List Price App. Wgt. (lbs) H x W x D (in.)
200-240 Volts 1 1/2 6.0 200/240 174609.00 721 4 7.5 x 3.9 x 5.45
2 7.0 200/240 174610.00 784 4 7.5 x 3.9 x 5.45
3 9.6 200/240 174611.00 992 4 7.5 x 3.9 x 5.45
Accessories / Kits
5 16.5 200/240 174615.00 1,111 4 7.5 x 3.9 x 5.8
7 1/2 23.0 200/240 174616.00 1,484 7 9.83 x 5.12 x 6.3
10 29.0 200/240 174617.00 1,832 7 9.83 x 5.12 x 6.3
15 42.0 200/240 174618.00 2,849 20 12.33 x 6.88 x 8.08
20 54.0 200/240 174619.00 3,501 20 12.33 x 6.88 x 8.08
400-480 Volts 1/2 1.1 400/480 174620.00 707 3 7.5 x 3.9 x 4.35
1 2.1 400/480 174621.00 759 3 7.5 x 3.9 x 4.35
1 1/2 3.0 400/480 174622.00 823 4 7.5 x 3.9 x 5.45
Mods / Factory
2 3.5 400/480 174623.00 878 4 7.5 x 3.9 x 5.45
Options
3 4.8 400/480 174624.00 1,034 4 7.5 x 3.9 x 5.45
5 8.2 400/480 174625.00 1,170 4 7.5 x 3.9 x 5.8
7 1/2 11.0 400/480 174626.00 1,482 7 9.83 x 5.12 x 6.3
10 14.0 400/480 174627.00 1,830 7 9.83 x 5.12 x 6.3
15 21.0 400/480 174628.00 2,856 20 12.33 x 6.88 x 8.08
20 27.0 400/480 174629.00 3,512 20 12.33 x 6.88 x 8.08
X-Ref / Index
25 35.0 400/480 174630.00 4,358 20 12.33 x 6.88 x 8.08
30 45.0 400/480 174991.00 5,173 14 12.5x6.92x8.09
40 59.0 400/480 174992.00 5,752 24 14.19x8.72x10.07
50 74.0 400/480 174710.00 7,901 31 17.19x8.72x10.07
60 87.0 400/480 174711.00 9,614 35 20.19x8.72x10.07
480-590 Volts 1 1.7 480/590 174631.00 875 3 7.5 x 3.9 x 4.35
2 2.7 480/590 174632.00 975 4 7.5 x 3.9 x 5.45
Tech Information
3 3.9 480/590 174633.00 1,127 4 7.5 x 3.9 x 5.45
5 6.1 480/590 174634.00 1,274 4 7.5 x 3.9 x 5.8
7 1/2 9.0 480/590 174635.00 1,591 7 9.83 x 5.12 x 6.3
10 11.0 480/590 174636.00 1,961 7 9.83 x 5.12 x 6.3
15 17.0 480/590 174637.00 3,147 20 12.33 x 6.88 x 8.08
20 22.0 480/590 174638.00 4,053 20 12.33 x 6.88 x 8.08
25 27.0 480/590 174639.00 4,693 20 12.33 x 6.88 x 8.08
Warnings/Cautions
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
*Items being discontinued, use like ratings found in "Single or Three Phase input" found on
previous page.
General Specifications:
AC / DC Controls
• Indoor use only inverter that is designed to be used with vector duty motors
• Typical applications would include: packaging machinery, food processing,
conveying systems, machinery and HVAC systems
• Enclosure: NEMA 4, IP65, -10 to 55°C, derate per °C above 40°C
Standard Features:
Accessories / Kits
Easy Set-up and Operation: Program the vector control in one of four convenient ways:
• From the front of the drive
• The optional remote keypad
• A PC Using TechLink software
(Available free from www.leeson.com)
• The innovative EPM programmer
Mods / Factory
Modes of operation:
Options
• Enter/mode
• Process control: PID modes: direct or reverse acting
Vivid Illumination:
• PID sleep mode
• 4 digit LED display
• Easy to read from a distance • Voltage monitoring
• Movable decimal point • Current monitoring
Warnings/Cautions
382
AC / DC Controls
Gearmotors
SM4 Series Flux Vector Series AC Inverters
NEMA® 4 IP65 Enclosure Protection
AC / DC Controls
(Use with three phase 230V motor)
Output Input Dimensions
Voltage HP Amps Voltage◘ Catalog Number List Price App. Wgt. (lbs) H x W x D (in.)
1/2 2,4 115/230 174652.00 850 4 8.0 x 6.28 x 4.47
115/230 Volts 1/2 2,4 115/230 174540.00◊ 1,189 4 8.0 x 6.28 x 4.47
1 4,2 115/230 174653.00 969 4 8.0 x 6.28 x 4.47
Accessories / Kits
1,5 6,0 115/230 174654.00 1,180 4 8.0 x 6.28 x 4.47
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
◊ With integral disconnect switch
Mods / Factory
Output Input Dimensions
Voltage HP Amps Voltage◘ Catalog Number List Price App. Wgt. (lbs) H x W x D (in.)
Options
1/2 2,4 208-240 174655.00 765 4 8.0 x 6.28 x 4.47
1 4,2 208-240 174656.00 820 4 8.0 x 6.28 x 4.47
208-240 Volts 1 1/2 6,0 208-240 174657.00 958 6 8.0 x 6.28 x 6.31
2 7,0 208-240 174658.00 1,040 6 8.0 x 6.28 x 6.31
3 9,6 208-240 174659.00 1,243 7 8.0 x 7.12 x 6.77
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
X-Ref / Index
◊ With integral disconnect switch
Tech Information
208-240 Volts 5 16,5 208-240 174660.00 1,545 12 10.0 x 8.96 x 8.0
7 1/2 23,0 208-240 174661.00 ∫ 2,078 11 10.0 x 8.04 x 8.0
10 29,0 208-240 174662.00 ∫ 2,623 11 10.0 x 8.04 x 8.0
15 42,0 208-240 174699.00 ∫ 3,698 25 14.5 x 9.42 x 9.45
20 54,0 208-240 174700.00 ∫ 5,041 26 14.5 x 9.42 x 9.45
400-480 Volts 1/2 1,5 400-480 174671.00 916 4 8.0 x 6.28 x 4.47
1/2 1,5 400-480 174542.00 ◊ ∫ 1,240 4 8.0 x 6.28 x 4.47
Warnings/Cautions
1 2,1 400-480 174672.00 986 4 8.0 x 6.28 x 4.47
1 1/2 3,0 400-480 174673.00 1,066 6 8.0 x 6.28 x 6.31
2 3,5 400-480 174674.00 1,162 6 8.0 x 6.28 x 6.31
3 4,8 400-480 174675.00 1,325 6 8.0 x 6.28 x 6.31
5 8,2 400-480 174676.00 1,641 12 10.0 x 8.96 x 8.0
7 1/2 11,0 400-480 174677.00 2,068 12 10.0 x 8.96 x 8.0
10 14,0 400-480 174678.00 ∫ 2,472 11 10.0 x 8.04 x 8.0
10 14,0 400-480 174546.00 ◊ ∫ 2,975 11 10.0 x 8.04 x 8.0
15 21,0 400-480 174701.00 ∫ 3,568 25 14.5 x 9.42 x 9.45
15 21,0 400-480 174544.00 ◊ ∫ 4,225 25 14.5 x 9.42 x 9.45
20 27,0 400-480 174702.00 ∫ 4,778 26 14.5 x 9.42 x 9.45
25 34,0 400-480 174703.00 ∫ 5,980 26 14.5 x 9.42 x 9.45
30 40,0 400-480 174704.00 ∫ 6,899 31 18.5 x 9.42 x 9.45
480-590 Volts 1 1,7 480-590 174663.00 1,066 4 8.0 x 6.28 x 4.47
2 2,7 480-590 174664.00 1,261 6 8.0 x 6.28 x 6.31
3 3,9 480-590 174665.00 1,459 6 8.0 x 6.28 x 6.31
5 6,1 480-590 174666.00 1,803 12 10.0 x 8.96 x 8.0
7 1/2 9,0 480-590 174667.00 2,282 12 10.0 x 8.96 x 8.0
10 11,0 480-590 174668.00 ∫ 2,720 11 10.0 x 8.04 x 8.0
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
∫ = Fan cooled - other controls are convection cooled
◊ With integral disconnect switch
Features:
AC / DC Controls
• Password protected
• Constant torque with adjustable current limit
• Steel enclosure with aluminum heat sinks
• Dynamic braking kits available
• Remote keypads available
• PID software built-in for motor feedback
X-Ref / Index
• UL Listed
Tech Information
384
AC / DC Controls
Gearmotors
Micro Series AC Inverters
AC / DC Controls
Output Input
Voltage HP Amps Voltage Catalog Number List Price App. Wgt. (lbs) Dimension Key
200-240 Volts 1/2 2.2 200-240 174914.00 1,296 6 B
1 4.0 200-240 174915.00 1,361 6 C
1.5 5.2 200-240 174916.00 1,425 6 C
2 6.8 200-240 174917.00 1,523 9 E
3 9.6 200-240 174918.00 1,637 9 E
Accessories / Kits
5 15.2 200-240 174919.00 1,936 11 F
7 1/2 25.0 200-240 174545.00 2,864 13 M
10 28.0 200-240 174551.00 3,705 15 L
15 42.0 200-240 174557.00 4,889 19 N
20 54.0 200-240 174560.00 6,635 21 P
25 68.0 200-240 174569.00 8,037 38 T
30 80.0 200-240 174571.00 9,642 44 T
400-480 Volts 1 2.0 400-480 174920.00 1,632 6 B
Mods / Factory
2 3.4 400-480 174921.00 1,790 7 D
Options
3 4.8 400-480 174922.00 1,936 9 E
5 7.6 400-480 174923.00 2,178 9 E
10 14.0 400-480 174552.00 4,018 13 M
15 21.0 400-480 174558.00 5,159 15 L
20 27.0 400-480 174561.00 6,845 17 N
25 34.0 400-480 174563.00 8,072 21 P
30 40.0 400-480 174565.00 8,788 21 P
X-Ref / Index
40 52.0 400-480 174567.00 10,128 35 T
50 65.0 400-480 174593.00 12,344 44 W
60 77.0 400-480 174572.00 13,564 67 W
75 96.0 400-480 174580.00 17,194 185 AG
100 124.0 400-480 174582.00 20,907 250 AH
125 156.0 400-480 174584.00 23,491 260 AH
Tech Information
150 180.0 400-480 174586.00 32,046 360 AL
480-590 Volts 1 1.6 480-590 174925.00 1,809 6 B
2 2.7 480-590 174926.00 1,999 7 D
3 3.9 480-590 174927.00 2,209 9 E
5 6.1 480-590 174928.00 2,410 9 F
7 1/2 9.0 480-590 174929.00 2,945 11 I
10 11.0 480-590 174553.00 4,488 13 R
Warnings/Cautions
15 17.0 480-590 174559.00 5,925 17 N
20 22.0 480-590 174562.00 7,525 19 O
25 27.0 480-590 174564.00 8,887 21 P
30 32.0 480-590 174566.00 9,954 22 S
40 41.0 480-590 174599.00 11,040 38 T
50 52.0 480-590 174594.00 13,392 45 W
60 62.0 480-590 174573.00 14,981 51 W
Specifications are subject to change without notice
Dimension Table see page 389
General Specifications:
• Food-safe white epoxy finish
• No external cooling fan required
• Water, oil and dust-tight enclosure protected WASHGUARD® NEMA® 4/12
• Same features as Micro Series inverters as shown on previous page
Accessories / Kits
Output
Voltage HP Amps Input Voltage ◘ Catalog Number List Price App. Wgt. (lbs) Dimension Key
200-240 Volts 1/2 2.2 200-240 174935.00 1,835 8 G
1 4.0 200-240 174936.00 1,993 8 G
1 1/2 5.2 200-240 174482.00 2,020 8 Y
Mods / Factory
◄ Enclosures are NEMA 12 only – others are NEMA 4/12 Specifications are subject to change without notice
◘ User programmable for 50Hz and other voltage inputs
Dimension Table see page 389
Gearmotors
Washguard Micro Series AC Inverters
®
NEMA® 4X (IP65)
Stainless Steel
AC / DC Controls
WASHGUARD® NEMA® 4X
Accessories / Kits
General Specifications:
• 300-Series stainless steel
• No external cooling fans
• Must be protected from caustic agents
• Same features as NEMA 1 Micro Series inverters
Mods / Factory
Options
Output
Voltage HP Amps Input Voltage ◘ Catalog Number List Price App. Wgt. (lbs) Dimension Key
200-240 Volts 1/2 2.2 200-240 174527.00 2,154 8 G
1 4.0 200-240 174528.00 2,312 8 G
1 1/2 5.2 200-240 174529.00 2,419 8 Y
X-Ref / Index
2 6.8 200-240 174530.00 2,564 10 H
3 9.6 200-240 174531.00 2,694 11 J
5 15.2 200-240 174732.00 3,750 11 K
7 1/2 22.0 200-240 174735.00 4,616 27 Q
10 28.0 200-240 174738.00 5,758 32 U
15 43.0 200-240 174741.00 7,035 40 V
400-480 Volts 1 2.0 400-480 174532.00 2,539 8 G
Tech Information
2 3.4 400-480 174533.00 2,877 10 H
3 4.8 400-480 174534.00 3,086 10 H
5 7.6 400-480 174535.00 3,523 11 J
10 14.0 400-480 174747.00 5,918 11 Q
15 21.0 400-480 174750.00 7,083 32 U
20 27.0 400-480 174753.00 8,742 36 V
480-590 Volts 1 1.6 480-590 174536.00 2,759 8 G
Warnings/Cautions
2 2.7 480-590 174537.00 3,080 10 H
3 3.9 480-590 174538.00 3,332 10 H
5 6.1 480-590 174539.00 3,770 11 J
7 1/2 9.0 480-590 174759.00 5,097 13 K
10 11.0 480-590 174761.00 6,540 17 Q
15 17.0 480-590 174764.00 7,856 38 U
20 22.0 480-590 174767.00 9,499 40 V
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
Dimension Table see page 389
NEMA® 4X (IP65)
Stainless Steel
AC / DC Controls
Output
HP Amps Input Voltage ◘ Catalog Number List Price App. Wgt. (lbs) Dimension Key
1/4 1.4 115/230 174519.00 2,107 8 AD
1/2 2.2 115/230 174520.00 2,343 8 X
1 4.0 115/230 174521.00 2,511 11 H
1 1/2 5.2 115/230 174517.00 3,086 11 H
2 6.8 208-230 174525.00 2,640 11 H
3 9.6 208-230 174526.00 2,769 12 J
Mods / Factory
◘ User programmable for 50Hz and other voltage inputs Specifications are subject to change without notice
Options
Output
HP Amps Input Voltage ◘ Catalog Number List Price App. Wgt. (lbs) Dimension Key
1/4 1.4 115/230 174996.00 1,661 8 AD
1/2 2.2 115/230 174998.00 1,813 8 X
Tech Information
Gearmotors
Dimension Information for Micro Series Drives
AC / DC Controls
Dimension
Key H W D N P Q R S
6.88" A 7.50 4.70 3.33 2.35 1.60 1.37 5.50 0.88
B 7.50 4.70 3.63 2.35 1.90 1.37 5.50 0.88
Conduit Holes: Large holes = 1.75" C 7.50 4.70 4.33 2.35 2.60 1.37 5.50 0.88
Small hole = 1.13"
D 7.50 6.12 4.22 3.77 2.40 1.37 5.50 0.88
Accessories / Kits
E 7.50 6.12 5.12 3.77 3.30 1.37 5.50 0.88
CONDUIT HOLES FOR 174586.00
F 7.88 7.86 5.94 5.13 3.95 1.50 5.88 1.13
7.45" 9.00" 7.00" 9.00" G 7.88 6.12 4.35 3.06 2.70 1.37 5.88 0.88
H 7.88 7.86 4.90 4.80 3.25 1.37 5.88 0.88
I 9.38 7.86 6.25 5.13 3.95 1.50 7.38 1.13
7.25" 6.50" J 7.88 7.86 5.90 4.80 4.25 1.37 5.88 0.88
Mods / Factory
K 9.75 10.26 7.20 5.13 5.25 2.00 7.75 1.13
Options
Conduit Holes: Large holes = 3.00" L 11.25 7.86 6.84 3.93 4.19 2.00 7.75 1.38
Small holes = 1.13"
M 9.38 7.86 6.84 3.93 4.19 2.00 5.88 1.13
N 12.75 7.86 6.84 3.93 4.19 2.00 9.25 1.38
NEMA 1 ONLY
O 12.75 7.86 7.40 3.93 4.19 2.00 9.25 1.38
P 12.75 10.26 7.74 5.13 5.00 2.50 9.25 1.38
X-Ref / Index
Q 11.75 10.26 8.35 5.13 5.75 2.00 9.75 1.13
R 9.38 7.86 7.40 3.93 4.19 2.00 5.88 1.13
S 12.75 10.26 8.25 5.13 5.00 2.50 9.25 1.38
T 15.75 10.26 8.35 5.13 5.75 2.50 12.25 1.38
U 13.75 10.26 8.35 5.13 5.75 2.00 11.75 1.38
V 15.75 10.26 8.35 5.13 5.75 2.00 13.75 1.38
Tech Information
W 19.75 10.26 8.55 5.13 5.75 2.50 16.25 1.75
X 7.88 7.86 3.75 4.80 2.10 1.37 5.88 0.88
NEMA 4/12 Y 7.88 6.12 5.25 3.06 3.60 1.37 5.88 0.88
WASHGUARD® ONLY Z 20.25 10.26 8.35 5.13 5.75 2.00 16.25 1.38
AA 15.75 10.26 8.35 5.13 5.75 2.00 11.75 1.38
Warnings/Cautions
AB 21.00 13.72 8.35 5.13 6.10 2.00 16.25 1.38
AC 7.50 6.12 3.63 3.77 1.80 1.37 5.50 0.88
AD 7.88 6.12 3.63 3.06 2.00 1.37 5.88 0.88
AE 25.00 13.00 10.50 5.56 6.50 2.62 – 1.38
SEE
AF 47.00 16.64 11.85
CHART
AG 29.00 16.64 11.85 7.14 6.88 3.12 – 1.75
AH 29.00 24.42 11.85 11.12 6.50 4.50 – 2.50
AI 29.00 36.66 11.85 11.50 9.00 4.50 – 2.50
NEMA 1 & NEMA 4/12 AJ 37.00 18.00 13.30 7.50 8.00 3.13 7.14 1.75
AK 39.00 26.00 13.30 11.50 9.00 4.50 9.14 2.50
SEE
Q AL 29.00 36.66 11.85
CHART
AM 31.00 14.00 11.86 6.00 7.50 2.62 5.64 1.38
AN 49.00 18.00 13.30 7.50 8.00 3.13 7.14 1.75
AO 39.00 26.00 13.30 11.50 9.00 4.50 9.14 2.50
General Specifications:
AC / DC Controls
ever before
• The wide-ranging modular system enables various product
configurations depending on machine requirements
• Spring loaded control terminals (fixed)
• More functionalities for advanced application
X-Ref / Index
390
AC / DC Controls
Platinum eTM VSD Series
Gearmotors
IP20 Enclosure Protection
AC / DC Controls
App.
Output List Wgt. Dimensions
Fieldbus Input Voltage HP Amps Catalog Number Price (lbs) H x W x D (in)
N/A 230/240 Volts - 1 or 3 Phase 1/3 1.7 176105.00 354 2 6.1 x 2.36 x 5.12
1/2 2.4 176106.00 415 2 6.1 x 2.36 x 5.12
3/4 3.2 176107.00 461 2 7.09 x 2.36 x 5.12
Accessories / Kits
1 4.2 176108.00 491 2 7.09 x 2.36 x 5.12
1 1/2 6.0 176109.00 569 3 9.84 x 2.36 x 5.12
2 7.0 176110.00 661 3 9.84 x 2.36 x 5.12
3 9.6 176111.00 753 3 9.84 x 2.36 x 5.12
CANopen/Modbus 230/240 Volts - 1 or 3 Phase 1/3 1.7 176112.00 445 2 6.1 x 2.36 x 5.12
1/2 2.4 176113.00 507 2 6.1 x 2.36 x 5.12
3/4 3.2 176114.00 553 2 7.09 x 2.36 x 5.12
1 4.2 176115.00 584 2 7.09 x 2.36 x 5.12
Mods / Factory
1 1/2 6.0 176116.00 661 3 9.84 x 2.36 x 5.12
Options
2 7.0 176117.00 753 3 9.84 x 2.36 x 5.12
3 9.6 176118.00 844 3 9.84 x 2.36 x 5.12
N/A 400/480 Volts - 3 Phase 1/2 1.3 176120.00 597 2 6.1 x 2.36 x 5.12
3/4 1.8 176121.00 767 2 7.09 x 2.36 x 5.12
1 2.4 176122.00 644 2 7.09 x 2.36 x 5.12
1 1/2 3.2 176123.00 706 3 9.84 x 2.36 x 5.12
2 3.9 176124.00 762 3 9.84 x 2.36 x 5.12
X-Ref / Index
3 5.6 176125.00 844 3 9.84 x 2.36 x 5.12
CANopen/Modbus 400/480 Volts - 3 Phase 1/2 1.3 176127.00 830 2 6.1 x 2.36 x 5.12
3/4 1.8 176128.00 859 2 7.09 x 2.36 x 5.12
1 2.4 176129.00 891 2 7.09 x 2.36 x 5.12
1 1/2 3.2 176130.00 936 3 9.84 x 2.36 x 5.12
2 3.9 176131.00 999 3 9.84 x 2.36 x 5.12
Tech Information
3 5.6 176132.00 1,090 3 9.84 x 2.36 x 5.12
Catalog List
Accessories Number Price
Warnings/Cautions
Keypad Interface 174356.00 84
USB Interface 174357.00 77
WiFi Direct Interface Module 174358.00 248
Blank Interface Cover (4-pack) 174359.00 39
Specifications are subject to change without notice
391
AC / DC Controls
Platinum eTM VSD - Plus Series
Gearmotors
General Specifications:
AC / DC Controls
tools
• Pluggable control terminal
• More functionalities for advanced application
• Fieldbus - EtherCAT, EtherNet/IP, Profinet, CANopen,
Modbus, Profibus, (options)
Tech Information
392
AC / DC Controls
Platinum eTM VSD - Plus Series
Gearmotors
IP20 Enclosure Protection
For Use With Three Phase Induction or PMAC Motors - Power Units
AC / DC Controls
App.
Output List Wgt. Dimensions
Input Voltage HP Amps Catalog Number Price (lbs) H x W x D (in)
230/240 Volts - 1 or 3 Phase 1/3 1.7 176133.00 369 2 6.1 x 2.36 x 5.12
1/2 2.4 176134.00 430 2 6.1 x 2.36 x 5.12
3/4 3.2 176135.00 475 2 7.09 x 2.36 x 5.12
Accessories / Kits
1 4.2 176136.00 536 2 7.09 x 2.36 x 5.12
1 1/2 6.0 176137.00 629 3 9.84 x 2.36 x 5.12
2 7.0 176138.00 753 3 9.84 x 2.36 x 5.12
3 9.6 176139.00 905 3 9.84 x 2.36 x 5.12
400/480 Volts - 3 Phase 1/2 1.3 176140.00 738 2 6.1 x 2.36 x 5.12
3/4 1.8 176141.00 813 2 7.09 x 2.36 x 5.12
1 2.4 176142.00 891 2 7.09 x 2.36 x 5.12
1 1/2 3.2 176143.00 1,029 3 9.84 x 2.36 x 5.12
Mods / Factory
2 3.9 176144.00 1,145 3 9.84 x 2.36 x 5.12
Options
3 5.6 176145.00 1,290 3 9.84 x 2.36 x 5.12
5 9.5 176146.00 1,670 5 9.84 x 3.54 x 5.12
7 1/2 13.0 176147.00 2,194 5 9.84 x 3.54 x 5.12
10 16.5 176148.00 2,659 8 10.83 x 4.72 x 5.12
15 23.5 176149.00 3,402 8 10.83 x 4.72 x 5.12
20 32.0 176150.00 4,187 23 13.78 x 8.07 x 9.06
25 40.0 176151.00 5,002 23 13.78 x 8.07 x 9.06
X-Ref / Index
30 47.0 176152.00 5,829 23 13.78 x 8.07 x 9.06
Specifications are subject to change without notice
Control Units
Tech Information
Catalog List
Type Number Price
Standard I/O 174362.00 152
Application I/O 174363.00 246
CANopen - Standard I/O 174364.00 246
Modbus-RTU - Standard I/O 174365.00 246
Profibus-DP - Standard I/O 174366.00 308
Warnings/Cautions
EtherCat - Standard I/O 174367.00 398
Profinet - Standard I/O 174368.00 430
EtherNet/IP - Standard I/O 174369.00 398
Specifications are subject to change without notice
Catalog List
Accessories Number Price
Keypad Interface 174356.00 84
USB Interface 174357.00 77
WiFi Direct Interface Module 174358.00 248
Blank Interface Cover (4-pack) 174359.00 39
Remote Keypad Kit 174370.00 202
393
AC / DC Controls
AC Control Kits
Gearmotors
Dynamic braking components for the Micro Series drives Micro Series Drives can be modified to include
dynamic braking. The modifications involve replacing board(s) inside of the drive as well as adding a dynamic
braking resistor in a separate enclosure. Larger drives require a combination of dynamic braking board and
an additional Form C relay board. Instructions are included with the boards. Also available as a modification,
AC / DC Controls
550-575V 174184.00 509 2 * Dynamic braking resistors are required with the dynamic braking boards
Specifications are subject to change without notice
* Dynamic braking resistors are required with the dynamic braking boards
Specifications are subject to change without notice
460-480V 174145.00 943 1 * Compatible with any Micro Series, NEMA 1, drive.
550-575V 174140.00 966 1 NOTE: Using the remote keypad on a Washguard® Inverter is not
recommended, for the control will no longer meet NEMA® 4/12
40 460-480V 174146.00 1,229 1 sealing requirements.
550-575V 174141.00 1,229 1 Specifications are subject to change without notice
50-60 460-480V 174147.00 1,421 1
550-575V 174142.00 1,421 1
Gearmotors
Type 12 Dimensions for models rated above 30HP Type 1 Dimensions for models rated above 30HP at
at 240/200 VAC and 60 HP at 400/480 VAC 240/200 VAC and 60 HP at 590/480/400 VAC
AC / DC Controls
W 0.68" W
0.31" 0.68"
R
IF W = 13.00" 0.31"
1.36"
1.50"
H H
0.36" 1.50"
Dia. 1.36"
0.36"
Dia.
Accessories / Kits
IF W = 14.00"
Mounting Tab Detail Mounting Tab Detail
Mods / Factory
D Dia. 3.00"
1.36"
Options
P N
1.50"
IF W > 18.00"
N
X-Ref / Index
Electronic Programming Unit allows off-line set-up and
replication of the drive’s plug-in electronic programming Contact your local
module (shown at right). Excellent for multi-drive sales office for
applications. Keypad input and alphanumeric display product information
simplify programming. RS-232 serial port allows
downloading of configuration files from personal
Tech Information
computer.
Catalog Number List Price App. Wgt. (lbs)
EEPM1RA 1,020 2
Warnings/Cautions
EPM Bulk Pack
Plug-in electronic programming modules App.
(EPM). Allow off-line set-up and replication of Catalog List Wgt.
Number Price (lbs)
program using Electronic Programming Unit. 174190.00 226 1
Set of 10.
Specifications are subject to change
without notice
Catalog List
Discriptor Number Price
Micro Series Keypad 006707.01 71
Speed Pot (10k/5w pot, washers & nut) 006708.01 74
395
AC / DC Controls Accessories For The SM2
AC Control Kits Flux Vector Series Drives
Gearmotors
the dynamic braking resistor in one convenient in one convenient package. Larger units require a
package. Larger units require a separate resistor. separate resistor. The modules can be panel or DIN
The modules can be panel or DIN rail mounted. rail mounted.
¤ Braking resistors are included with the module and not ¤ Braking resistors are included with the module and not
purchased separately purchased separately
Specifications are subject to change without notice Specifications are subject to change without notice
Motor App.
Drive Voltage Catalog List Wgt.
HP Rating Number Price (lbs)
15-20 208-230V 174144.00 498 1
400-480V 174144.00 498 1
480-590V 174149.00 510 1
Gearmotors
AC Control Kits
AC / DC Controls
Catalog List Wgt.
standard 35mm DIN rails for panel building. Set of six. Number Price (lbs)
174186 for “A” chassis drives. 174186.00 209 3
174187 for “B” chassis drives. 174187.00 221 3
174188 for “C” chassis drives. 174188.00 280 3
Refer to SM Plus and SM Series Dimension Tables Specifications are subject to change without notice
for A, B & C listing information.
Accessories / Kits
SM4 Remote Keypad
Potentiometer kit takes the place of the Use with App.
up/down buttons on the drive’s keypad Width (W) Catalog List Wgt.
Mods / Factory
dim. of: Number Price (lbs)
gives operators hands-on speed control 6.28 or 7.12 174693.00 282 2
Options
over the inverter’s speed range. 8.04 or 8.96 174697.00 295 2
X-Ref / Index
EPM Bulk Pack
Plug-in electronic programming modules App.
(EPM). Allow off-line set-up and Catalog List Wgt.
Number Price (lbs)
replication of program using Electronic 174190.00 226 1
Programming Unit. Set of 10.
Tech Information
Specifications are subject to change without notice
Warnings/Cautions
Remote Keypad
Remote keypad kit includes eight-foot App. 3.375 “
connecting cable and gasket. Mounted Drive Catalog List Wgt.
Type Number Price (lbs)
in proper enclosure, the keypad kit will
SM Plus 174191.00 303 2
provide up to NEMA® 4 protection.
SM Series 174194.00 246 2
SM2 Vector 174150.00 297 2
2.156 “
Specifications are subject to change without notice
Includes parts to convert a rigid base mounted motor to NEMA D face with base.
Shaded frame indicates cast iron motor kits for 15, G15 and 17 series motors.
NOTE: The D flange kits can only be used on rigid base motors. They will not fit NEMA C face motors.
Accessories / Kits
Gearmotors
Motor Accessories - Field Installed
LEESON Ultimate E - Rolled Steel & Cast Iron Motors
®
AC / DC Controls
Includes parts to convert a rigid base mounted motor to NEMA D-Flange with base.
The C Face Kits cannot be used as replacements on a factory-produced C face motor.
LEESON Ultimate E “B19” Series Cast Iron and Rolled Steel Motors
Accessories / Kits
D Flange Kit App. Wgt.
NEMA Frame Enclosure Catalog Number List Price (lbs) Notes
254T-256T TEFC B176205.00 664 85 A
284T/TS-286T/TS TEFC B176206.00 907 91 A
324T/TS-326T/TS TEFC B176194.00 995 91 A
324T-326T ODP B176201.00 995 85 C
324TS-326TS ODP B176202.00 943 91 B
Mods / Factory
364T/TS-365T/TS TEFC B176207.00 1,396 105 A
Options
364T-365T ODP B176203.00 1,395 105 C
364TS-365TS ODP B176204.00 1,396 102 B
Notes:
A All Poles
X-Ref / Index
B 2-pole only
C 4, 6 & 8-pole only
Tech Information
Warnings/Cautions
Includes parts to convert a rigid base mounted motor to NEMA C face with base.
The C face kits cannot be used as replacements on a factory-produced C face motor.
For motors with Catalog Numbers 092000–140999
Accessories / Kits
Enclosed 175077.00 83 2 —
182T-184T Open / Enclosed 175691.00 100 3 D
182T-184T Special Open / Enclosed 175294.00 100 5 E
S213T Open / Enclosed 175693.00 191 2 D
213T-215T Open 175845.00 191 19 —
(1750,1140, & 850 RPM) Enclosed 175844.00 191 15 —
213T-215T ODP 175303.00 178 15 F
Tech Information
Notes:
Warnings/Cautions
A For use with motors having “K” or “P” suffix on date code.
B For motors manufactured after January 1, 2007, having a “B” suffix letter after the motor’s date code.
D Use this kit for 182-4T and S213T motors with catalog numbers 131454 and higher, or with a G prefix.
E Converts a 182T-184T frame motor to the C-face dimensions of a 143T-145T or 182U-184U frame motor
F For use with 213T-215T 3600 RPM motors only.
G For use with new Industrial AG motors that start with “117”
H For use with 56HZ Industrial AG motor 117867.00
Gearmotors
NEMA® C Face Kits
AC / DC Controls
NEMA C Face Kits
Models - SREW, SSEW, SRD, SSD, SRF, SSF, SF
App. Wgt.
NEMA Frame SYN RPM Enclosure Catalog Number List Price (lbs.) Notes
Accessories / Kits
56 All SREW, SRD LM24631 83 2 1
56 All SREW, SRD LM24807 83 2 2
56 All SRF LM24808 83 2 1
56 All SRF LM24810 83 2 2
143T-145T All SSEW, SSD LM24807 83 2 2
143T-145T All SSF LM24810 83 2 2
182T-184T All SSF LM25736 160 12
182T-184T All SSEW, SRD, SSF 175691.00 100 3 4
Mods / Factory
213T-215T All SSEW, SSD LM25737 190 15
Options
213T-215T All SSF LM25738 190 12
254T-256T All SSD LM25740 244 13
284T/TS-286T/TS 3600 & 1200 SD LM24062 556 20 3
324T/TS-326T/TS All SD LM24063 723 47
324T/TS-326T/TS All SF LM24057 803 33
364T/TS-365T/TS All SD LM24064 1,210 53
404T/TS-405T/TS All SD LM24065 1,594 55
X-Ref / Index
404T/TS-405T/TS All SF LM24059 1,594 53
444T/TS-445T/TS 3600 SD LM24066 1,740 80
444T/TS-445T/TS 1200 & 1800 SD LM24067 1,740 88
444T/TS-449T/TS 3600 SF LM24060 1,927 98
444T/TS-449T/TS 1800 & 1200 SF LM24061 1,927 98
447T/TS-449T/TS 3600 SD LM24068 1,927 98
Tech Information
447T/TS-449T/TS 1200 & 1800 SD LM24069 1,927 98
Specifications are subject to change without notice
When changing a rigid mount motor to C Face motor, a non-NEMA BA dimension may result.
For motor BA dimension information, please refer to the chart on the inside back cover flap of this catalog.
Notes:
1 56 frames with 203 drive end bearing
2 56 & 143/5T frame motors with a 205 drive end bearing
Warnings/Cautions
3 For 2-Pole and 6-Pole motors
4 Motors built having the letter “M” after the date code
Gearmotors
NEMA® C Face Kits
AC / DC Controls
Includes parts to convert a rigid base mounted motor to NEMA C face with base.
The C face kits cannot be used as replacements on a factory-produced C face motor.
For 15, G15 and 17 Series cast iron motors only.
NEMA C Face Kits
Accessories / Kits
NEMA Frame Enclosure Catalog Number List Price Notes
143T-145T Enclosed 163116.60 187 B
182T-184T Enclosed 175805.60 247 B
182T-184T Enclosed 175804.60 247 E
213T-215T Open 175066.60 247 B
Enclosed 175068.60 247 G
Enclosed 175869.60 247 B
Mods / Factory
254T-256T Open 175067.60 377 B
Options
Enclosed 175191.60 377 B
284T/TS-286T/TS Open 175058.60 523 B
Enclosed 175061.60 523 B
324T/TS-326T/TS Open 175059.60 680 G
Open 175454.60 680 B
Enclosed 175062.60 680 B
364T/TS-365T/TS Open 175060.60 1,135 B
X-Ref / Index
Enclosed 175063.60 1,135 B
Open 175601.60 1,135 H
Enclosed 175603.60 1,135 H
404T/TS-405T/TS Open 175605.60 1,492 B
Enclosed 175199.60 1,492 B
444T/TS-445T/TS Open 175606.60 1,633 B
Tech Information
Enclosed 175664.60 1,633 B
447T/TS-449T Enclosed 4 & 6-pole 175958.60 1,808 B
Enclosed 2-pole 176004.60 1,808 B
Specifications are subject to change without notice
Green items Are For Premium Efficient Motors Only
When changing a rigid mount motor to C face motor, a non-NEMA BA dimension may result.
For motor BA dimension information, please refer to the chart on the inside back cover flap of this catalog.
Warnings/Cautions
Notes:
B C-Face kit can be used with either an EPAct or Premium Efficient motor
E For use to replace the C-Face on a 182/184TC frame motor only
G Not for use with Premium efficient motors
H For 364T/TS -365T/TS frame motors built 2007 and later
App. Wgt.
NEMA Frame Catalog Number List Price (lbs.) Notes
143T - 145T 175787.00 239 7 —
182T-184T 175788.00 358 10 —
213T-215T 175789.00 427 16 —
254T-256T 175790.00 506 35 —
284T/TS-286T/TS 175791.00 661 47 —
Accessories / Kits
When changing a rigid mount motor to C face motor, a non-NEMA BA dimension may result
NEMA Frame SYN RPM Enclosure Catalog Number List Price (lbs.) Notes
143T All CCN, CCF, CCS LM24811 83 7
145T All CCN, CCF, CCS LM24815 98 7
182T-184T All CCF, CCS LM25736 160 12
182T-184T All CCF 175805.60 247 12 5
213T-215T All CCF, CCS LM25739 190 20
213T-215T All CCF 175869.60 247 15 5
Tech Information
Gearmotors
NEMA® C Face Kits
AC / DC Controls
App. Wgt.
NEMA Frame SYN RPM Enclosure Catalog Number List Price (lbs.) Notes
182T-184T All AAF LM26679 190 10
182T-184T All AAF 175691.00 100 10 6
213T-215T All AAF LM30146 220 15
254T-256T All AF/AAF LM30147 326 26
284T/TS-286T/TS All AF/AAF LM20116 453 28
Accessories / Kits
Specifications are subject to change without notice
When changing a rigid mount motor to C face motor, a non-NEMA BA dimension may result.
For motor BA dimension information, please refer to the chart on the inside back cover flap of this catalog.
Notes:
6 For Lincoln AL motors where the model numbers end with AP26
Mods / Factory
Rodent Screen Kits
Options
App. Wgt.
NEMA Frame Enclosure Catalog Number List Price (lbs.)
182T-184T Open 175872.00 165 1
213T-215T Open 175871.00 295 1
254T-256T Open 175873.00 424 2
X-Ref / Index
284T-286T Open 175874.00 424 3
324T Open 175894.00 994 5
326T Open 175875.00 994 5
Tech Information
Chemical Service/
Severe Duty Conversion Kits
®
Warnings/Cautions
For use with LEESON® Cast Iron Wattsaver e motors and “G15” series motors.
Cast iron fan covers for cast iron motors. Designed to easily convert TEFC motors to
all cast iron construction. All these motors have inert, corrosion resistant fiber filled
thermoplastic fan as standard. Kit includes one cast iron fan cover.
App. Wgt.
NEMA Frame IEC Frame Catalog Number List Price (lbs.)
182T-184T — 175663.60 292 10
213T-215T — 175050.60 426 12
254T-256T 160 175051.60 572 18
284T-286T 180 175052.60 998 22
324T-326T 200 175053.60 1,043 29
364T-365T 225 175054.60 1,557 39
404T-405T 250 175055.60 1,695 49
444T-445T 280 175056.60 1,921 59
447T-449T — 175891.60 1,921 112
Specifications are subject to change without notice
254T-256T B176239.00 86
406
Accessories / Kits
Gearmotors
Q-CAR Kits
• The Q-Car rotor cartridge replacement kit makes replacing worn bearings ultra simple. No special tools,
AC / DC Controls
no damaged seals.
• Allows for quick access to the motor interior.
• The kit ensures a perfectly fitted and watertight bearing with no additional machining required in a matter
of minutes.
List
Accessories / Kits
Kit # Motor where used Kit Descritopn Price
176250.00 117119.00, 117127.00 1/2 HP, 1800RPM, 56 FR - TENV design $362
176294.00 117118.00, 117126.00 1/2 HP, 3600RPM, 56C FR - TENV design $362
176295.00 117120.00, 117128.00 3/4 HP, 3600RPM, 56C FR - TENV design $362
176251.00 117121.00, 117129.00 3/4 HP, 1800RPM, 56 FR - TENV design $362
176297.00 103414.00 3/4 HP, 1800RPM, S56C FR - TEFC design $362
176252.00 117122.00, 117130.00 1 HP, 3600RPM 56 FR - TENV design $356
176253.00 119975.00, 119976.00 1 HP, 1800RPM, 56FR - TENV design $409
Mods / Factory
176254.00 119511.00, 119512.00 1 HP, 1800RPM, 56 FR - TEFC design $409
Options
176255.00 122219.00 1 HP, 1800RPM, 143TC FR - TEFC design $413
176261.00 119520.00, 119522.00 1 1/2 HP,1800RPM, 56C FR - TEFC design $418
176296.00 121879.00, 121908.00 1 1/2 HP, 3600RPM, 56C FR - TEFC design $432
176256.00 121880.00, 121909.00 1 1/2 HP, 1800RPM, 143TC FR - TEFC design $432
176258.00 119523.00, 119524.00 2 HP, 1800RPM, 56 FR - TEFC design $431
176257.00 121881.00, 121910.00 2 HP, 3600RPM, 145TC FR - TEFC design $427
X-Ref / Index
176259.00 121882.00, 121911.00 2 HP, 1800RPM, 145TC FR - TEFC design $436
176298.00 119530.00, 119531.00 3 HP, 3600RPM, S56C FR - TEFC design $498
Tech Information
Warnings/Cautions
407
Gearmotors Accessories / Kits
Drip-Cover Kits
For Drip-Proof Motors LEESON® Motors Only
Each kit includes one drip-cover. Designed to protect drip-proof motors from
rain, snow and ice when mounted outdoors in a vertical position.
AC / DC Controls
App. Wgt.
Frame Catalog Number List Price (lbs.) Notes
48-S56 175003.00 65 2 —
48-S56 175298.00 65 2 A
56 175004.00 76 2 —
143T-145T 175792.00 76 2 A
182T-184T 175614.00 95 3 —
Accessories / Kits
182T-184T 175961.00 89 3 —
213T-215T 175846.00 134 12 —
213T-215T 175305.00 134 12 F
213T-215T 175962.00 134 4 —
254T-256T 175963.00 172 7 —
Notes:
A For use with motors having “K” or “P” suffix on date code Specifications are subject to change without notice
F For use with 213T-215T 3600 RPM motors only
Mods / Factory
App. Wgt.
X-Ref / Index
D Use this kit for 182-4T and S213T motors with catalog For steel frame motors only
numbers 131454 and higher or with a G prefix
J For motors having face mounted fan guard
K For use with 1800 RPM motors only
Gearmotors
Drip-Cover Kits
AC / DC Controls
Includes parts to convert an ODP or TEFC motor to have a Drip Cover
LEESON Ultimate E “B19” Series Cast Iron Motors
Accessories / Kits
Frame Enclosure Catalog Number List Price App. Wgt. (lbs.) Notes
182T-184T TEFC B176241.00 235 60 C, A
213T-215T TEFC B176214.00 256 60 C, A
213T-215T TEFC B176230.00 256 60 S, A
254T-256T TEFC B176215.00 440 39 A
284T/TS-286T/TS TEFC B176216.00 511 55 A
324T/TS-326T/TS TEFC B176217.00 528 55 A
364T/TS-365T/TS TEFC B176218.00 580 76 A
Mods / Factory
404T/TS-405T/TS TEFC B176219.00 773 75 A
Options
444T/TS-445T/TS TEFC B176220.00 826 115 A
447T/TS-449T/TS TEFC B176221.00 833 91 A
X-Ref / Index
324T/TS-326T/TS ODP B176225.00 574 38 A
364T/TS-365T/TS ODP B176226.00 465 55 A
404T/TS-405T/TS ODP B176227.00 683 76 A
444T/TS-449T/TS ODP B176228.00 744 75 A
Tech Information
S Rolled Steel frame motors only
Warnings/Cautions
409
Gearmotors Accessories / Kits
JP Pump Drip Cover Kits
These kits are used for converting LEESON motors to totally enclosed blower cooled motors. Cooling per
Options
MG1.6 (IC46) The kits are designed for inverter and vector drive applications where continuous cooling is
required regardless of motor shaft speed. The kit is mounted on the back of the motor after removing the
fan guard and fan. Modifying the shaft is not required.
Blower Motor
Blower Voltage Phase NEMA Frame Catalog Number List Price CFM App. Wt. (lbs.)
115 1 56-145T 175775.00^ 1,033 115 4
115 1 182-4T 175895.00♠ 1,157 115 4
115 1 213-5T 175896.00♠ 1,208 235 5
Tech Information
Blower Motor
Blower Voltage Phase NEMA Frame Catalog Number List Price CFM App. Wt. (lbs.)
115 1 182-4T 175674.00 1,157 260 10
115 1 213-5T 175675.00 1,209 260 11
115 1 254-6T 175676.00 1,298 260 17
115 1 284-6T 175677.00 1,559 500 24
115 1 324-6T 175678.00 1,662 500 28
230/460 3 360T 175879.00 3,449 500 35
230/460 3 360T 176002.00 ◊ 3,828 500 35
230/460 3 400T 175880.00 3,828 500 45
230/460 3 444T/445T 175558.00 4,382 500 55
Specifications are subject to change without notice
◊ Use with 360T frame motors built 2007 and later
Gearmotors
Encoder Kits LEESON® Motors Only
Specifications:
These kits include the parts and encoder for field assembly of slim-line, through-shaft encoder designed to
AC / DC Controls
slip over the motor’s fan end shaft. Blower kit sold separately.
Features:
• Output is 1024 pulses per revolution
• 5 to 28 VDC line driver output. Short-circuit protection is standard. Inputs are over voltage and reverse
voltage protected. Electrical noise immunity exceeds international standards. Encoders are isolated from
Accessories / Kits
shaft currents using hard anodized sleeves and non metallic anti-rotation hardware. Designed for long-life
in industrial environments using an all-metal, shock resistant code disk. The encoder is protected by the
motor’s fan cover after mounting. Using a blower fan kit is suggested for proper motor cooling.
• Short circuit protection
• Isolated from shaft currents
• Shock resistant code disks
• Use with blower kits to protect and cool motors
Mods / Factory
Options
Encoder Kits - Cast Iron Wattsaver® Motors Encoder Kits
For use with 150, G150 & 170 series cast iron TEFC motors only For use with rolled steel, TEFC motors only
NEMA® Frame Catalog Number List Price NEMA Frame Catalog Number List Price
182-4T 175684.00 1,800 56-145T 175960.00 1,450
X-Ref / Index
213-5T 175685.00 1,800 182-4T 175897.00 2,101
254-6T 175686.00 2,905 213-5T 175898.00 2,101
284-6T 175687.00 2,905 Specifications are subject to change without notice
320T 175641.00 2,962
360T 175642.00 2,962
400T 175643.00 2,962
444TS (2 pole) 175644.00 2,962
Tech Information
444T (4/6 pole) 175645.00 2,962
Specifications are subject to change without notice
Speedmaster® Motors
For use with LEESON Speedmaster 2000:1, 810000 series inverter duty motors only
Warnings/Cautions
Catalog List
Encoder Description Enclosure Frame Brand / Mod PPR Number Price
Modular Mount, 5-15 VDC, with EPIC connector TENV 143-256T Northstar SL56 1024 E175927.00 4,056
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T Dynapar HS35 1024 E175928.00 2,605
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T BEI HS35 1024 E175929.00 2,605
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T Dynapar HS35 2048 E175930.00 2,605
Shaft Mount, 5-26 VDC, with 10 pin connector TENV 143-256T BEI HS35 2048 E175931.00 2,605
Modular Mount, 5-15 VDC (Encoder Conduit Box Required) TEBC 284-449T Northstar SL56 1024 E175921.00 4,056
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T Dynapar HS35 1024 E175922.00 2,605
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T BEI HS35 1024 E175923.00 2,605
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T Dynapar HS35 2048 E175924.00 2,605
Shaft Mount, 5-26 VDC (Encoder Conduit Box Required) TEBC 284-449T BEI HS35 2048 E175925.00 2,605
Conduit Box Required for all TEBC Units — — — — ECB175926.00 289
Specifications are subject to change without notice
Terminal block kits for 15 and 17 series NEMA® frame cast iron motors. Can also be used for replacement
AC / DC Controls
on 193 series cast iron and 192 series aluminum IEC metric motors.
App. Wgt.
NEMA Frame IEC Frame Catalog Number List Price (lbs.)
— 63-90L 175881.00≠ 24 1
180/210T 100/112/132 175668.60 49 2
250/280T 160/180 175667.60 55 3
Accessories / Kits
Accessories / Kits
Options
56/140-frame kit (pictured) includes die cast aluminum conduit box, cover, gaskets, grounding screw,
mounting hardware and adapter plate for mounting box on existing holes in motor. 180 and 210-frame kits
X-Ref / Index
include all parts required to replace the conduit box including the die cast conduit box, plug, cover, gaskets
and mounting hardware. No adapter plate is required because these kits mount on existing holes. All
conduit boxes have 1/2-NPT tapped lead exit holes on two adjacent sides with one hole plugged.
Note: the kit will not work with larger HP single-phase 210-frame motors.
App. Wgt.
NEMA Frame Catalog Number List Price (lbs.)
56-140T 175892.00 ^ 96 2
182-4T 175649.00 * 116 2
213-5T 175847.00 * 140 11
Warnings/Cautions
App. Wgt.
Catalog Number List Price (lbs.)
175026.00 131 2
175755.00 (1) 131 2
Specifications are subject to change without notice
(1) For motors having a letter P after the date code.
Gearmotors
Adjustable Motor Bases - NEMA® 48-449T Frames
Heavy gauge steel mounting bases simplify the install- strength and durability for a long life.
ation of motors and make the tensioning, maintenance and A single (215T frame and smaller)
replacement of belts a simple efficient task. Fabricated or double (NEMA 254T frame and
from sheet or steel plate, then primed and finished in larger) zinc plated adjusting screw is
a gray rust and corrosion resistant oven-baked finish. provided. Motor mounting bolts are
AC / DC Controls
Gussets and reinforcing channels on larger units and included. Adjustable motor bases
continuous seam welding on all units give these bases are designed to mount to your existing motor’s base.
XC
XC
BT AR AR
BT
F
AM BB AM BB
Accessories / Kits
F
D BOLT D BOLT
AR AR
AT
AT E E
AY BOLT AY BOLT AX
E E AO AO
AU DIA. AX AU DIA.
AO AO AL
AL
Mods / Factory
Frame Number AL AM AX BB E F AO AR AU** BT AT XC Bolt Bolt (lbs.)
48 175032.00 98 10 61⁄4 11⁄8 21⁄8 13⁄8 31⁄2 23⁄4 3⁄8 3.00 0.08 7⁄8 5⁄16 x 1 3⁄8 x 4 2
Options
56 175033.00 98 105⁄8 61⁄2 11⁄8 27⁄16 11⁄2 313⁄16 27⁄8 3⁄8 3.00 0.08 7⁄8 5⁄16 x 1 3⁄8 x 4 3
143T 175034.00 118 101⁄2 71⁄2 11⁄8 23⁄4 2 33⁄4 33⁄8 3⁄8 3.00 0.12 13⁄16 5⁄15 x 1 3⁄8 x 4 5
145T 175035.00 118 101⁄2 81⁄2 11⁄8 23⁄4 21⁄2 33⁄4 37⁄8 3⁄8 3.00 0.12 13⁄16 5⁄15 x 1 3⁄8 x 4 6
182T 175036.00 152 123⁄4 91⁄2 11⁄2 33⁄4 21⁄4 41⁄2 41⁄4 1⁄2 3.00 0.13 11⁄2 3⁄8 x 13⁄4 1⁄2 x 5 9
184T 175037.00 152 123⁄4 101⁄2 11⁄2 33⁄4 23⁄4 41⁄2 43⁄4 1⁄2 3.00 0.13 11⁄2 3⁄8 x 13⁄4 1⁄2 x 5 9
213T 175038.00 189 15 11 13⁄4 41⁄4 23⁄4 51⁄4 43⁄4 1⁄2 31⁄2 0.16 11⁄2 3⁄8 x 13⁄4 1⁄2 x 5 13
215T 175039.00 189 15 121⁄2 13⁄4 41⁄4 31⁄2 51⁄4 51⁄2 1⁄2 31⁄2 0.16 11⁄2 3⁄8 x 13⁄4 1⁄2 x 5 15
X-Ref / Index
254T 175040.00 287 173⁄4 151⁄8 2 5 41⁄8 61⁄4 65⁄8 5⁄8 4.00 3⁄16 17⁄16 1⁄2 x 13⁄4 5⁄8 x 6 17
256T 175041.00 287 173⁄4 167⁄8 2 5 5 61⁄4 71⁄2 5⁄8 4.00 3⁄16 17⁄16 1⁄2 x 13⁄4 5⁄8 x 6 18
284T 175042.00 312 193⁄4 167⁄8 2 51⁄2 43⁄4 7.0 71⁄2 5⁄8 41⁄2 3⁄16 111⁄16 1⁄2 x 2 5⁄8 x 6 21
286T 175043.00 312 193⁄4 183⁄8 2 51⁄2 51⁄2 7.0 81⁄4 5⁄8 41⁄2 3⁄16 111⁄16 1⁄2 x 2 5⁄8 x 6 22
324T 175044.00 412 223⁄4 191⁄4 21⁄2 61⁄4 51⁄4 8.0 81⁄2 3⁄4 51⁄4 3⁄16 23⁄16 5⁄8 x 21⁄2 3⁄4 x 9 31
326T 175045.00 412 223⁄4 203⁄4 21⁄2 61⁄4 6 8.0 91⁄4 3⁄4 51⁄4 3⁄16 23⁄16 5⁄8 x 21⁄2 3⁄4 x 9 32
364T 175046.00 543 251⁄2 201⁄2 21⁄2 7 55⁄8 9.0 91⁄8 3⁄4 6.00 1⁄4 21⁄16 5⁄8 x 21⁄2 3⁄4 x 9 44
365T 175047.00 543 251⁄2 211⁄2 21⁄2 7 61⁄8 9.0 95⁄8 3⁄4 6.00 1⁄4 21⁄16 5⁄8 x 21⁄2 3⁄4 x 9 45
Tech Information
404T 175048.00 976 283⁄4 223⁄8 3 8 61⁄8 10.0 97⁄8 7⁄8 7.00 1⁄4 21⁄2 3⁄4 x 3 3⁄4 x 11 60
405T 175049.00 976 283⁄4 237⁄8 3 8 67⁄8 10.0 105⁄8 7⁄8 7.00 1⁄4 21⁄2 3⁄4 x 3 3⁄4 x 11 61
444T 175088.00 1.208 311⁄4 245⁄8 3 9 71⁄4 11.0 11.0 7⁄8 71⁄2 1⁄4 21⁄2 3⁄4 x 3 3⁄4 x 11 68
445T 175089.00 1.208 311⁄4 265⁄8 3 9 81⁄4 11.0 12.0 7⁄8 71⁄2 1⁄4 21⁄2 3⁄4 x 3 3⁄4 x 11 73
447T 175090.00 1.332 311⁄4 301⁄8 3 9 10 11.0 133⁄4 7⁄8 71⁄2 5⁄16 3 3⁄4 x 31⁄2 3⁄4 x 11 92
449T 175302.00 1.332 311⁄4 351⁄8 3 9 121⁄2 11.0 161⁄4 7⁄8 71⁄2 5⁄16 3 3⁄4 x 31⁄2 3⁄4 x 11 95
* Motor mounting bolt diameter and length, four supplied with each base Specifications are subject to change without notice
** Base mounting bolts, four required—not supplied with base NOTE: These bases are not suitable for vertical mounting
Warnings/Cautions
All dimensions in inches
Transition Bases
Transition bases compensate for the difference in adjustable motor bases above. They are for horizontal
mounting dimensions and shaft height of a rigid base mountings, shimming may be needed for direct coupled
NEMA T frame to the next higher NEMA U frame. This loads. Thread size listed is for mounting transition base
makes it possible, for example, to replace a 10 HP NEMA to the “T” frame motor. Dimensions listed are for
254U frame motor with a 10 HP NEMA 215T frame one piece—two are supplied, one for each side of the
motor without modifying the basic installation. Made of motor’s foot.
the same high-quality materials and construction as the
414
Accessories / Kits
Gearmotors
Shaft Grounding Rings (SGRs)
For use with Lincoln Motors™ rolled steel, aluminum and cast iron frame US
built motors
For use with LEESON Inverter Duty, 800000 Series cast iron motors
®
AC / DC Controls
For use with LEESON IEEE-841 duty motors
Note - will not meet DIV 2 certification with SGRs
Shaft grounding is recommended (NEMA® MG1 31.4.4.3) as an effective means of bearing protection
for motors operated from inverter power. One grounding device is adequate to bleed down inverter-
sourced shaft voltages, thereby protecting both bearings for motors as large as 6085 frame. Kits includes
grounding ring, mounting hardware and instructions. Shaft ground rings fit these NEMA shaft extension
Accessories / Kits
frames listed below, they are designed to mount on the shaft end.
List
NEMA Frame Catalog Number Price
Mods / Factory
48 LM32396 219 For Use with Cast Iron Wattsaver® Motors
56 LM32397 219
Options
143-145T LM32398 219 “17” Series Shaft Grounding Ring (SGR)
182-184T LM32399 255 List
213-215T LM32401 290 NEMA Frame Motor Poles Catalog Number Price Notes
254-256T LM32402 364 182-4T 2-4 176090.60 153 T. O
284-286T LM32403 651 213-5T 2-4-6 176091.60 184 T. O
284-286TS LM32402 364 254-6T 2-4-6 176092.60 228 T. O
X-Ref / Index
324-326T LM32405 510 284-6T/TS 2-4-6 176093.60 239 T
324-326TS LM32403 651 284-6T/TS 2-4-6 176094.60 254 O
364-365T LM32407 584 324-6T/TS 2-4-6 176094.60 254 T. O
364-365TS LM32403 651 364-5T/TS 2-4-6 176095.60 276 T
404-405T LM32409 869 364-5T/TS 2-4-6 176159.00 248 O
404-405TS LM32405 510 404-5T/TS 2-4-6 176096.60 411 T. O
444-445T LM32411 1,527 444-5T 4-6 176097.60 643 T. O
Tech Information
444-445TS LM32407 584 447-9T 4-6 176097.60 643 O
447/449T LM32411 1,527 447-9T 4-6 176098.60 643 T
447/449TS LM32407 584 Specifications are subject to change without notice
Specifications are subject to change without notice Note: TEFC Motors produced after August 2015 have holes
available for mounting these kits. April 2016 on ODP Models.
Not available on 180 and 210 frame ODP motor
T- TEFC
O- ODP
Warnings/Cautions
For Use with LEESON Ultimate e®
Series Motors ODP and TEFC designs
Shaft Grounding Ring Kit (SGR)
List
NEMA Frame Motor Poles Catalog Number Price
182-4T 2-4-6 176154.00 138
213-5T 2-4-6 176155.00 165
254-6T 2-4-6 176156.00 204
284-6T/TS 2-4-6 176157.00 214
324-6T Δ 2-4-6 176158.00 228
364-5TS 2 176158.00 228
364-5T 4-6 176159.00 248
404-5T 4-6 176161.00 367
404-5TS 2 176162.00 367 Specifications are subject to change without notice
444-5T - 447T - 449T 4-6 176163.00 576
Δ - No SGR ring for TEFC 324/326TS frame motors
444-5TS - 447TS - 449TS 2 176164.00 576 For use with Ultimate E Series motors built after Sept. 2015
hole in the mounted part. NEMA C face motors are by far the
most popular and most readily available. NEMA D flange kits
are stocked by some manufacturers, including Regal®.
Warnings/Cautions
Gearmotors
AC / DC Controls
Accessories / Kits
Mods / Factory
Options
X-Ref / Index
Tech Information
Warnings/Cautions
“customerized” motors.
Starting with an off-the-shelf LEESON or Lincoln motor selected from the nearly 6,000 stock motors, the modifications listed
here can be completed in the time frame noted for each item.
Ordering Information
To order please specify the catalog number of the LEESON or Lincoln stock motor to be modified and the Mod-Squad
modification catalog number or numbers desired.
Accessories / Kits
An inventory of popular motors is maintained by the modification center for fast delivery. However, delivery of the modified
motor is governed by availability of the stock motor. If a stock motor is shipped from a district warehouse, delivery of the mod
will be extended.
Modification list prices are subject to the same discounts that apply to the motor. (Some motors, such as explosion-proof,
may not be modified). Days noted are working days excluding holidays and weekends—larger quantities may require additional
leadtime.
MOD-SQUAD Cancellation Policy
Mods / Factory
Modified motors may not be returned for credit or re-stocking. If a modification order is cancelled after it has been completed,
Options
but before it is shipped, a cancellation charge of double the amount of the modification charge will be invoiced to the customer.
Any Mod-Squad order cancelled before the modification is completed is subject to cancellation charges of 10% of total charges
for that item.
Terms are net 30 days, FOB Indianapolis, IN, with freight prepaid on single shipments of 1,500 pounds or 3,000 dollars or more
to the first destination within the continental United States, excluding Alaska.
X-Ref / Index
Gearmotors
Modification Program
AC / DC Controls
stock motors. 48-449T, agricultural motors as well as – replace standard bearings with ones having
all Washguard® duty and wash-thru motors have sealed low-temperature lubricant (Beacon ® #325 or
bearings as standard. Note: Adding sealed bearings equivalent), with a temperature range of –75°F to
to motors having grease fittings may not make the +250°F. Standard lubricant has a temperature range
bearings regreasable. Grease fittings will be removed of –20°F to +300°F and is considered a high temp
and plugged. lubricant for these motors. Explosion proof motors
can only be rated to a –13°F temperature.
Accessories / Kits
NEMA® Catalog List NEMA Catalog List
Frame Number Price Frame Number Price
Mods / Factory
213T-215T L2A210 272 213T-215T* L2B210 272
Options
254T-256T L2A250 478 *Rolled steel, cast iron or aluminum motors
284T-286T L2A280 608 Note: Not available on Washdown Duty Motors
Note: IEC motors with equivalent frame sizes are also applicable for this
324T-326T L2A320 798 Mod.
364T-365T L2A360 1,415 Note: Cannot modify Stainless Motors for L2b modification
404T-405T L2A400 1,467 Note: Any requests for -30°C or below are subject to engineering
approval
444T-449T L2A440 1,954
X-Ref / Index
#L2c Change bearing grease on cast iron motors with open- #L2d Install insulated bearings to protect inverter-driven
type regreaseable bearings. Endbells and bearings are motors from inverter-sourced shaft voltages. May
purged and repacked with low-temperature grease not be installed on Division 1 or Division 2 hazardous
(Beacon #325 or equivalent) with a temperature locations. Contact factory for lead time on installing
range of -75°F to +250°F or high-temperature insulated bearings.
grease (Dow Corning® DC44M or equivalent) with a
temperature range of -40°F to +400°F. Specify grease
Tech Information
to be used. Check with Regal® to verify the motor can
NEMA Catalog List
operate in the temperature range required! LEESON Frame Number Price
Motors Only.
143T-145T L2D140 568
182T-184T L2D180 680
213T-215T L2D215 1,996
NEMA IEC Catalog List
Frame Frame Number Price 254T-256T L2D250 2,125
Warnings/Cautions
254T-256T – L2C250 438 284T-286T L2D280 2,125
284T-286T 160 L2C280 490 324T-326T L2D320 2,308
324T-326T 180 L2C320 684 364T-365T L2D360 2,358
364T-365T 200 L2C360 731 404T-405T L2D400 2,387
404T-405T 225 L2C400 1,171 444T-449T L2D440 2,644
444T-449T 250 L2C440 1,609
#L3a Convert brakemotors (TENV only) with standard enclosure brakes to weatherproof brakes
Catalog List
by changing the disc brake. Weatherproof brakes have additional sealing and protection. Number Price
Price includes cost of weatherproof brake.
AC / DC Controls
L3A3 1,001
Lead time = 3 days
L3A6 1,001
#L3b Change the standard brake to one with a different torque rating. Specify torque rating. L3A10 1,021
Standard enclosure brakes only—not weatherproof. Some torque limitations apply, L3A15 1,052
specify torque rating. L3A25 1,157
Catalog Number L3B. List price - $195
Lead time = 3 days
Accessories / Kits
#L3c Change brake coil voltage. Change from standard coil voltage to 115 volts (for Stearns® brand
brakes only).
Catalog Number L3C. List Price $195
L3c - Break coil sold separately, contact LEESON for pricing. Leadtime = 14 days
#L3d Install a LEESON BrakeKit. See brakemotor section for brakekits available and motors that
can be converted. Specify the catalog number of both the stock motor and the brakekit.
List Price $399 Brakekit installation
Lead time = 3 days
Mods / Factory
#L3e Remove brake from stock brakemotor for customers supplying their own brake. Specify
Options
Grounded Cord
w/Plug
Gearmotors
L6 Switches – Power or Electronic Starting Three Days
NOT FOR 1 PHASE EXPLOSION PROOF OR STAINLESS MOTORS
#L6a On-off switch for 2 HP and smaller single phase motors only. Install double-
pole, single-throw switch in the conduit box, with switch guard and a 6-foot
type S.O. cord with grounded plug, 115 VAC or 230 VAC—please specify.
AC / DC Controls
Also specify shaft rotation (clockwise or counterclockwise) viewed
from the drive shaft end of the motor.
Catalog List
Rating Number Price On-Off
16-20A/115V or 230V L6A 403 Switch w/Guard
Accessories / Kits
#L6b Replace mechanical centrifugal switch on single phase motors 2HP and
smaller with solid-state, encapsulated, electronic starting switch. Capacitor-
start, induction-run motors only. Subject to engineering approval. Catalog
Number L6B. List Price $365
L7 Severe Duty – Cast Iron Fan Covers – LEESON® Motors Only Three Days
Mods / Factory
#L7a Remove steel fan guard and
Options
NEMA® IEC Catalog List
install a cast iron fan guard on Frame Frame Number Price
LEESON 150, G150 and 170 182T-184T – L7A180 424
series NEMA and 193 series IEC
213T-215T – L7A210 477
TEFC cast iron motors to meet
254T-256T – L7A250 582
severe duty, mill and chemical
284T-286T 160 L7A280 908
duty specifications. Note: These
324T-326T 180 L7A320 941
X-Ref / Index
motors have cast iron endbells,
frame, and conduit box as 364T-365T 200 L7A360 1,326 Cast Iron Fan Cover
standard. Lincoln motor has a 404T-405T 225 L7A400 1,437
line of severe duty motors that 444T-445T 250 L7A445 1,446
include a cast iron fan guard. 447T-449T 280 L7A449 1,475
See page 106.
Tech Information
L8 Condensate Drains – Totally Enclosed Motors Two Days
#L8a 215T and smaller steel frame motors. Drill one or two
NEMA Catalog List
condensation drain holes on the periphery or in the
Frame Number Price
face of each endbell of steel frame 215T frame and
215T and smaller L8A40210 298
smaller totally enclosed motors. Specify location in
254T-365T L8A250360 413
both the shaft end and opposite endbell using a
Warnings/Cautions
drawing or clockface analogy. When specified, a 404T-449T L8A400440 496
drain can be added to the face of one endbell for shaft
up or down mounting. Condensate Drain
#L9a Install a drip cover on steel frame motors. Price includes drip cover.
LEESON® Motors Only
AC / DC Controls
#L9b Install a drip cover on cast iron motors. Price #L9c Install a drip cover on SPD, SRD and SSD Model
includes drip cover. Numbers. Not suitable for use on motors having
LEESON Motors Only NN in Notes column.
Lincoln Motors Only
NEMA Catalog List NEMA Catalog List
Frame Number Price Frame Number Price
Mods / Factory
#L10a Re-Connect leads in the conduit box to a single #L10c Extend leads up to 42 inches longer than standard by
voltage and/or for wye or delta connection. splicing. Specify additional length required.
Most motors 444T frame and above are single
voltage. Specify voltage and connection.
#L10b Remark leads using metal markers. Any size motor. Specify markings, letters or numbers. Specify
Catalog Number L10B. List Price $229
#L10d Add crimp-type terminal lugs – steel frame motors. Lugs standard on LEESON cast iron motors.
Specify Catalog Number L10D. List Price $177
Gearmotors
L12 Mountings Two Days
#L12a Add a stamped steel rigid base to steel frame #L12e Install a NEMA D flange to open or totally enclosed
motors. For 182-4T frame motors, minimum 8.50” motors of steel frame construction in 182-4T
(TEFC, rigid, C face) or 8” (ODP, rigid, C face) frame frame and cast iron 150 and 170 series motors in
AC / DC Controls
length is required. LEESON® Motors Only 213T frames through 445T frame. Steel rigid base
can be removed from steel frame 182-4T frame
NEMA® Catalog List motors. Specify and add for modification L12b.
Frame Number Price Rigid base cannot be removed from cast iron frame
42-48 L12A4248 229 motors. List Price includes D Flange.
56 L12A56 232 LEESON Motors Only
143T-145T L12A140 232
182T-184T L12A180 281 NEMA Catalog List
Accessories / Kits
Frame Number Price
213T-215T L12A210 341
182T-184T L12E180 533
Note: It is not possible to add a base to some three phase motors as
the resulting rigid base motor will be subject to EISA mandated 213T-215T L12E210 580
efficiency values. Contact the factory. 254T-256T L12E250 734
This Mod cannot be done on an explosion proof motor for an F2 284T-286T L12E280 889
conduit box location, cannot modify stainless steel motors for L12a 324T-326T L12E320 1151
modification. 364T-365T L12E360 1,251
404T-405T L12E400 1,675
Mods / Factory
#L12b Remove stamped steel rigid base from steel frame
motors. 444T-449T L12E440 2,180
Options
NEMA Catalog List #L12f Convert standard F1 motors to F2, sidewall or ceiling
Frame Number Price
mounting. Consists of repositioning the endbell vents
42-56 L12B4256 353
and condensation drains where applicable and the
143T-145T L12B140 353 conduit box lead hole. Note: If brakemotor, brake knob
Excludes Explosion Proof and Stainless Steel Motors will be located at 6 o’clock. Note: Only the 56/140
frame motors can have the motor bases removed
X-Ref / Index
#L12c Install a NEMA® C face on steel frame motors where needed. LEESON or Lincoln Motors
215T and smaller. Specify if the rigid base is to be motors where applicable. Excludes DC motors.
removed. If so, add for modification #L12b listed
above. List Price includes C face Kit. NEMA Catalog List
LEESON Motors Only Frame Number Price
56-184T L12F56180 454
NEMA Catalog List
Tech Information
213T-215T L12F210 492
Frame Number Price
254T-326T L12F250320 587
42-56* L12C4256 297
364T-449T L12F360449 760
143T-145T L12C140 297
182T-184T L12C180 321 Three phase only; single phase motors cannot be converted.
Please contact factory for Explosion proof motor approval for this
182T-184T** L12C180U 321
modification. Washdown and DC motors cannot be converted to F2.
213T-215T L12C210 397
Excludes Explosion Proof Motors #L12g Rotate standard conduit box position by 90°
Warnings/Cautions
*Adding a 48 C-Face results in a non-NEMA BA dimension. increments. Specify by clock face, i.e. 9 o’clock, 12
** Convert a 182T-184T frame motor to have a C-face dimensions o’clock, etc. for position (viewed from shaft end).
of a 143T-145T or 182U-184U frame motor (AJ = 5 7/8 ”, AK = 4 1/2”). Consists of repositioning the endbell vents and
The shaft dimensions and base location will not change.
condensation drains where applicable and the conduit
box lead hole. Note: If brakemotor, brake knob will be
#L12d Install a NEMA C face to 15, 17 or 19 series rotated 90° from conduit box. This mod. can no longer
cast iron motors. The rigid base cannot be be offered on the 180 and 210 frame motors for the
removed from these cast iron frame motors. List bases of these motors can no longer be removed
Price includes C Face Kit. LEESON Motors Only without damaging the motor. List Price includes D
Flange.
NEMA Catalog List
Frame Number Price
182T-184T L12D180 533 NEMA Catalog List
Frame Number Price
213T-215T L12D210 580
56-145T L12G56140 454
254T-256T L12D250 734
284T-286T L12D280 889 Three phase rolled steel only; single phase motors cannot be converted.
#L12h Install a metric (IEC) B5 flange to 190 series cast #L12k Reposition feet and nameplate (to relocate
aluminum or cast iron AC motors and DC steel conduit box) on AC aluminum-frame IEC motors
frame motors. List Price includes B-5 Kit. (63 thru 90L frame). LEESON Motors Only
AC / DC Controls
80 L12H80 580
80 (DC) L12HD80 310 #L12l Install C Face. For motors having AF/AAF in the
90 L12H90 580 model number. List Price includes C Face Kit.
90 (DC) L12HD90 310 Lincoln Motors Only
100 L12H100 819
112 L12H112 1,045 NEMA® Catalog List
100/112/(DC) L12HD100112 358 Frame Number Price
132 L12H132 403 182T-184T L12L182184 321
160 L12H160 580 213T-215T L12L213215 397
Mods / Factory
Gearmotors
#L12q Install C Face. For motors having CCF in the model #L12r Install C Face. For motors having CCS in the model
number. List Price includes C Face Kit. Lincoln number. List Price includes C Face Kit. Lincoln
Motors Only Motors Only
NEMA® Catalog List NEMA Catalog List
Frame Number Price Frame Number Price
AC / DC Controls
143T-145T L12Q143145 297 143T-145T L12R143145 297
182T-184T L12Q182184 533 182T-184T L12R182184 533
213T-215T L12Q213215 580 213T-215T L12R213215 580
254T-256T L12Q254256 734 254T-256T L12R254256 734
284T-286T L12Q284286 889 284T/TS-286T/TS L12R284286 889
342T-326T L12Q324326 1,151 342T/TS-326T/TS L12R324326 1,151
364T/TS-365T/TS L12R364365 1,251
404T/TS-405T/TS L12R404405 1,366
Accessories / Kits
444T/TS-445T/TS L12R444445 1,679
L13 Nameplates NOTE: All nameplates mods are subject to Engineering Approval Three Days
#L13a Provide an extra motor nameplate-unmounted. (Nameplate only) Add customer part number or change to other voltage
or frequency service. Unmounted nameplates are not available for explosion-proof motors.
Note: Markings for UL and CSA cannot be included on unmounted nameplates that are shipped loose and not
installed on a motor.
Mods / Factory
Add $1 (net) for each additional Aluminum or Mylar nameplate. Add $2 (net) for each additional stainless steel
Options
nameplate. Catalog Number L13A. List Price per motor $159 60Hz single phase motors cannot be re- rated to 50Hz
Must Provide Date Code Information.
#L13b Replace, existing nameplate on provided motor. Add customer part number or change to other voltage or frequency
service and mount to motor. List Price per motor $185
Note: Not available for motors that are all stainless steel construction.
#L13c Replace standard aluminum nameplate with stainless steel nameplate. LEESON® cast iron, WASHGUARD® and severe
X-Ref / Index
duty motors have stainless steel nameplates as standard. Add $2 (net) for each additional stainless steel nameplate.
List Price per motor $190
Must specify catalog number and date code of motor’s existing nameplate. Nameplates changed to a single voltage
connection does not mean motors would be re-connected to this connection unless the L10 Mod is also requested.
Additional nameplates must be identical.
Tech Information
L14 Paint Two Days*
#L14a Repaint motor to another LEESON or Lincoln Motors stock Catalog List
paint color. A sample of choices include LEESON blue, Frame Number Price
white epoxy, farm duty red, light gray epoxy, black, or black NEMA 42-215T L14A40210 195
epoxy. Powder coat paint is not available as a modification. NEMA 254T-365T L14A250360 396
For Lincoln Motors, your choices include: Lincoln gray, severe NEMA 404T-449T L14A400440 631
Warnings/Cautions
duty blue, black or gloss white. Not available on Lincoln Motors IEC 63-90 L14A6390 195
Wash-thru motors. Specify color. IEC 100-225 L14A100225 397
Lint-Proof Kit
L18 Motor Protection Two Days
#L18a Thermostats on the winding. Install one or more NEMA Catalog No. of List
Accessories / Kits
thermostats in the windings of NEMA® frame AC Type Frame Number Devices Price
motors on the brush plate of DC motors or on the Single Phase All L18AS40210 247 1
inside of frame on Sub-FHP DC motors. These are Three Phase 42-215T L18AT40210 281 2
pilot or signal devices only, to be used in series with a Three Phase 254T-365T L18AT250360 760 2
motor controller or starter to remove power from the Three Phase 404T-449T L18AT400440 949 2
motor. Red color leads are brought into the conduit box. Direct Current 42-56 L18AD4056 281 1
Specify normally open or closed contacts. Normally
closed thermostats connected in series. Thermostats
Mods / Factory
open as a threshold temperature is exceeded. Thermostats are reliable, produce an amplified output signal, usually a contact closure or fault trip
noise immune and easily configured into control schemes. Typically, inverter- annunciation. Thermistors are more accurate and faster responding than
duty motors have thermostats as standard equipment. thermostats.
Gearmotors
L21 Marine Service (IEEE 45) Motors –
Three Phase, Totally Enclosed – LEESON® Motors Only Five Days
#L21a In order for a motor to be approved for the L21 MOD, the motor NEMA® Catalog List
must meet: Frame Number Price
AC / DC Controls
• IP 54 minimum protection 56-215T** L21A40210 326
• Motor frame, conduit box and endbells must be cast iron 254T-365T L21A250360 549
construction - cast iron fan cover must be added 404T-405T L21A400 815
• Motor’s temperature rise must meet 70 degrees C or less and 444T-449T L21A440 1,029
must be rated at 1.15 or higher Service Factor (S.F.) Contact your local sales office for more information
Accessories / Kits
#L22a Drill and tap one hole in either end of motors shaft or mill a NEMA Catalog List
flat on the drive end shaft extension. Provide details of hole, Frame Number Price
thread size or flat with the order. List price is per modifi- 42-145T L22A40140 295
cation. For example, a motor modified by adding a tapped 182T-184T L22A180 311
hole and flat would be priced by adding the list price twice. 213T-215T L22A210 486
3 inches maximum depth hole. 250T-280T L22A250280 543
Does not include keyway modification.
Mods / Factory
Options
#L22b TEFC to air-over service. Convert a motor from totally enclosed, NEMA Catalog List
fan cooled construction to totally enclosed, air-over service by Frame Number Price
removing fan cover and fan and cutting off the fan end shaft. The 42-145T L22B40140 295
modified motor must be mounted in the air stream of the driven 182T-184T L22B180 311
fan for cooling purposes. 213T-215T L22B210 433
X-Ref / Index
Frame Number Price
284/286T L22C280 1,881
324/326T L22C320 1,881
364/365T L22C360 2,038
404/405T L22C400 2,276
444-449T L22C440 2,276
L23 Tachometer Mounting Provisions – DC Motors - LEESON Motors Only Five Days
Tech Information
#L23a Add a tachometer mounting kit to NEMA frame NEMA Catalog List
size Direct Current motors. See page 323 for Frame Number Price
availability of tachometer mounting kits. Does not SS56 L23ASS56 704
include tachometer. 56/145T L23A56140 730
Warnings/Cautions
Tach Kit Adaptor
#L24b CE Marking Kit - Includes new nameplate only with data in IEC34 format,
Catalog List
lead markers for IEC lead designations, a connection diagram, and a CE Number Price
Declaration of Conformity document. The nameplate will have the CE logo, L24B 165
or a CE decal will be provided. LEESON Motors Only UL will not be stamped
* Explosion proof motors
on nameplate - Must provide motors date code.
cannot be built or modified
Add $1 (net) for each additional aluminum or mylar nameplate. to meet CE.
Add $2 (net) for each additional stainless steel nameplate.
in a gasketed steel faceplate that must be mounted in Keypad with 2.5 foot cable L25A25 663
an enclosure for protection. An inverter modified for
Keypad with 5 foot cable L25A50 724
remote operation can only be operated from the remote
Keypad with 10 foot cable L25A100 847
keypad. Price includes remote keypad, faceplate, cable
and factory modification charges. See AC control section
for remote keypad kits for the Sub-Micro Series inverters.
Accessories / Kits
L27 Terminal Blocks – NEMA® Motors – LEESON Motors Only Five Days
Mods / Factory
with no protector
• Specify connection voltage and direction of
rotation for single-phase
• Not intended for 56, 143T & 145T-frame TENV
or ODP motors that have a built-in conduit box.
Contact LEESON for the suitability of adding a
Tech Information
#L27b Install a terminal block kit in the conduit box of a cast iron NEMA Catalog List
NEMA frame motor. Price includes kit. Frame Number Price
(IEC motors have a terminal block installed as standard.) 180/210T L27B180210 394
Warnings/Cautions
#L28 Install Dynamic Braking board in Micro Series drive. Catalog List
Note: Does not include Dynamic Braking resistor, HP Rating Voltage Number Price
which is ordered as a separate line item. See Micro 1/2 - 3HP All L28A174184 1,279
Series accessory section of catalog for resistor 5HP 200-230V L28A174185 1,343
selection. See page 402 for Dynamic Brake kits for 5HP 460-480V L28A174185 1,343
the Sub-Micro Series inverters. 5HP 550-575V L28A174184 1,279
7 1/2HP 200-230V L28A174192 1,261
7 1/2HP 460-480V L28A174193 1,261
7 1/2HP 550-575V L28A174193 1,261
10-60HP All L28A174192 1,261
Gearmotors
L29 Encoder Kits – WATTSAVER® &
SPEEDMASTER® Motors Two Days
#L29a Assemble a stock Encoder Kit on a WATTSAVER
NEMA® Catalog List
motor. Price is for assembly only. Motor and kit are Frame Number Price
AC / DC Controls
purchased separately. Specify motor and kit numbers. 56-215T L29A56215 342
Note: The assembly of an encoder kit on a 254T-324T L29A250320 553
WATTSAVER motor requires the removal of the 360T-405T L29A360400 625
external fan. The use of a Blower Fan Kit is strongly
encouraged for proper cooling!
Accessories / Kits
motor. Includes assembly of conduit box kit ECB175926 Frame Number Price
on 215T-449T frame motors. Price is for assembly only. 143T-215T L29B140210 244
Motor and kits are purchased separately. Specify motor 254T-365T L29B250360 516
and kit numbers. LEESON Motors Only
404T-445T L29B400440 790
Mods / Factory
56-215T L29C56210 244
Lincoln Motors Only
Options
254T-365T L29C250360 516
404T-445T L29C400440 790
X-Ref / Index
is for assembly only. Motor and kit are purchased Frame Number Price
separately. Specify motor and kit numbers. LEESON 56-215T L30B56210 244
Motors Only 254T-326T L30B250320 420
360T-440T L30B360440 622
Tech Information
#L31a Install larger size conduit box. AF, MD, SD and SF Model #L31b Install larger size conduit box. AF, MD, SD and SF
Numbers, S and H Efficiency Codes Model Numbers, S and H Efficiency Codes
Warnings/Cautions
284T-286T L31A284286 253 254T-256T L31B254256 234
324T-326T L31A324326 288 284T-286T L31B284286 253
364T-365T L31A364365 337 324T-326T L31B324326 288
404T-405T L31A404405 441 364T-365T L31B364365 337
404T-405T L31B404405 441
444T-449T L31B444449 617
Regal’s PDQ Modular Production Program utilizes specially designed and standard
Options
components to make almost any imaginable NEMA® frame multi-speed or low-speed motor
available when you need it. We pride ourselves on fast turnaround times on highly customized
motors.
Custom motors include two, three and four-speed motors and speed ranges of 900, 720, 600,
X-Ref / Index
For quotations, availability and application assistance, contact your local sales office.
Tech Information
Warnings/Cautions
Gearmotors
AC / DC Controls
Below is a listing of a few of our Factory “Build-up” options.
Please contact our local sales office for more information.
Accessories / Kits
ADDITIONAL LEAD LENGTH GROUND PROVISIONS
HIGH ALTITUDE HARDWARE
AMBIENT HIGH INERTIA LOAD
CONDUIT BOXES INSULATION
BALANCE LEADS
Mods / Factory
BEARINGS LUBRICATION
Options
ROLLER BEARINGS MARINE DUTY
INSULATED BEARINGS NAMEPLATES
BLOWER TYPES PAINT
BRAKES SCREENS
CONNECTIONS / CORDS SEALS & SLINGERS
X-Ref / Index
WYE DELTA SEVERE DUTY
PART WIND START SERVICE FACTOR
DOCUMENTATION - SUBMITTAL DATA SHAFTS
DOWELING SPACE HEATERS
DRAINS TACHOMETERS - SEE ENCODERS
Tech Information
ENCODERS TACONITE DUTY - SEE INPRO SEALS
END TURN BRACING TERMINAL BLOCKS / STRIPS
END BRACKETS - FACES & FLANGES TESTS
FREQUENCY - Other than 60Hz THERMAL PROTECTION
GREASE FITTINGS VERTICAL MODIFICATION
Warnings/Cautions
GREASE: LOW TEMP VIBRATION DETECTOR
GREASE: HIGH TEMP VOLTAGE - SPECIAL
431
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
003042.02 359 098007.00 306 100603.00 214 101637.00 119
003042.04 359 098008.00 306 100604.00 194, 217, 226 101638.00 119
AC / DC Controls
003042.05 359 098009.00 306 100699.00 194, 217, 226 101639.00 216
003042.06 359 098010.00 306 100700.00 194, 217, 226 101640.00 216
003043.01 359 098014.00 299, 313 100701.00 194, 217, 226 101641.00 216
003043.05 359 098015.00 299, 313 100704.00 255 101643.00 205
006707.01 395 098016.00 299, 313 100722.00 117 101644.00 205
006708.01 369, 395 098017.00 299, 313 100723.00 117 101645.00 194, 217
092011.00 30 098032.00 306 100767.00 194, 217 101646.00 53
Accessories / Kits
432
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
102689.00 246 102932.00 23 103716.00 223 107030.00 355
102690.00 245 102933.00 23 103717.00 223 107031.00 355
AC / DC Controls
102691.00 246 102963.00 213 103718.00 223 107032.00 355
102692.00 245 102964.00 213 103719.00 223 107033.00 355
102693.00 245 102965.00 213 103720.00 223 107034.00 355
102694.00 246 102966.00 214 103721.00 223 107035.00 355
102695.00 41 103019.00 53 103722.00 223 107036.00 355
102696.00 58 103020.00 53 103723.00 119 107037.00 355
102697.00 61 103082.00 28 103724.00 119 108014.00 306
Accessories / Kits
102792.00 78 103085.00 28 103725.00 119 108015.00 306
102793.00 78 103387.00 176 103726.00 119 108016.00 306
102794.00 78 103388.00 176 103727.00 119 108017.00 306
102795.00 78 103389.00 177 103756.00 90 108018.00 306
102860.00 58 103390.00 177 103757.00 90 108019.00 306
102861.00 58 103393.00 177 103758.00 90 108020.00 306
Mods / Factory
102862.00 26 103394.00 177 103759.00 90 108021.00 306
Options
102863.00 58 103395.00 181, 296 103760.00 90 108022.00 306
102864.00 26 103396.00 181, 296 103761.00 90 108023.00 306
102865.00 26 103397.00 181, 296 103782.00 220 108045.00 316
102866.00 26 103398.00 181, 296 103783.00 220 108046.00 316
102867.00 26 103399.00 181, 296 103794.00 255 108047.00 316
102868.00 26 103400.00 181, 296 103795.00 221 108048.00 316
X-Ref / Index
102869.00 26 103401.00 181, 296 103796.00 221 108050.00 316
102870.00 26 103402.00 181, 296 103797.00 221 108051.00 316
102871.00 26 103403.00 181, 296 103821.00 255 108052.00 316
102872.00 26 103404.00 181, 296 103878.00 206, 229 108053.00 316
102873.00 26 103405.00 181, 296 104008.00 90 108092.00 306
Tech Information
102903.00 28 103406.00 181, 296 107000.00 355 108226.00 157, 309
102904.00 23 103407.00 181, 296 107001.00 355 108227.00 157, 309
102905.00 23 103408.00 181, 296 107002.00 355 108228.00 157, 309
102906.00 23 103409.00 181, 296 107003.00 355 108229.00 157, 309
102907.00 28 103410.00 181, 296 107004.00 355 108230.00 157, 309
102908.00 23 103411.00 186 107005.00 355 108231.00 157, 309
Warnings/Cautions
102909.00 23 103412.00 186 107006.00 355 108232.00 157, 309
102910.00 28 103413.00 187 107007.00 355 108262.00 306
102911.00 30 103414.00 187 107008.00 355 108265.00 306
102912.00 30 103417.00 187 107009.00 355 108266.00 306
102913.00 30 103418.00 187 107010.00 355 108322.00 316
102914.00 30 103460.00 255 107011.00 355 108369.00 299, 313
102915.00 30 103520.00 122 107012.00 355 108370.00 299, 313
102916.00 28 103521.00 122 107013.00 355 108371.00 299, 313
102917.00 61 103522.00 122 107014.00 355 108372.00 299, 313
102918.00 75 103523.00 122 107015.00 355 108373.00 299, 313
102919.00 61 103530.00 122 107016.00 355 108407.00 157, 309
102920.00 75 103531.00 122 107017.00 355 108423.00 157, 309
102921.00 61 103711.00 223 107025.00 355 108424.00 157, 309
102922.00 61 103712.00 223 107026.00 355 108455.00 302, 318
102929.00 28 103713.00 223 107027.00 355 108456.00 302, 318
102930.00 28 103714.00 223 107028.00 355 108457.00 302, 318
102931.00 23 103715.00 223 107029.00 355 108458.00 302, 318
433
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
108502.00 306 109102.00 316 110142.00 24, 31, 251, 253 110446.00 58
108700.00 337 109103.00 316 110143.00 75 110448.00 58
AC / DC Controls
109074.00 183, 297, 322 110026.00 31, 215 110363.00 18 111075.00 104
109075.00 182, 321 110034.00 53 110388.00 19 111084.00 104
109076.00 182, 321 110040.00 26 110394.00 243 111085.00 104
109077.00 183, 297, 322 110041.00 27 110395.00 243 111086.00 104
109078.00 182, 321 110042.00 27 110396.00 243 111095.00 104
109079.00 182, 321 110047.00 58 110397.00 243 111096.00 104
Warnings/Cautions
434
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
111332.00 195, 219 112526.00 147 113700.00 20, 252 113956.00 118
111333.00 195, 219 112527.00 147 113765.00 23, 30 113957.00 118
AC / DC Controls
111334.00 196, 219 112528.00 147 113766.00 23, 30 113958.00 118
111335.00 196, 219 112529.00 147 113767.00 24, 30 113959.00 118
111348.00 194, 217 112547.00 150 113768.00 24, 30 114102.00 206, 229
111394.00 237 112615.00 205 113769.00 24, 30 114142.00 61
111915.00 31, 215 112626.00 147 113770.00 25, 30 114147.00 274
111917.00 76, 216 113019.00 148 113846.00 216 114149.00 274
Accessories / Kits
111919.00 194, 217 113022.00 148 113847.00 216 114150.00 274
111923.00 105 113023.00 148 113891.00 119 114151.00 274
111929.00 105 113024.00 148 113892.00 119 114152.00 275
111930.00 107 113027.00 214 113893.00 119 114154.00 275
111931.00 107 113028.00 120 113895.00 216 114155.00 275
111932.00 105 113029.00 120 113896.00 216 114156.00 273
111933.00 107 113256.00 192 113897.00 216 114157.00 273
Mods / Factory
111934.00 105 113266.00 17, 251 113901.00 243 114158.00 275
Options
111935.00 107 113280.00 205 113902.00 243 114159.00 275
111936.00 107 113281.00 20, 252 113903.00 243 114160.00 275
111937.00 105 113290.00 193 113904.00 243 114162.00 273
111938.00 105 113300.00 147 113905.00 243 114163.00 273
111940.00 105 113311.00 58 113906.00 205 114164.00 273
111944.00 107 113333.00 24, 31, 251 113907.00 205 114165.00 273
X-Ref / Index
111949.00 195, 219 113373.00 218 113908.00 244 114166.00 273
111950.00 273 113473.00 148 113909.00 244 114167.00 273
111951.00 273 113580.00 147 113910.00 244 114176.00 58
111953.00 218 113581.00 147 113911.00 244 114201.00 119
111954.00 218 113582.00 147 113912.00 245 114202.00 119
Tech Information
111955.00 218 113583.00 147 113913.00 245 114203.00 119
111956.00 218 113584.00 147 113914.00 245 114207.00 120
111957.00 218 113586.00 150 113915.00 245 114208.00 120
111958.00 218 113587.00 150 113916.00 244 114213.00 58
111959.00 218 113588.00 150 113917.00 244 114214.00 20, 252
111960.00 218 113589.00 150 113918.00 244 114215.00 20, 252
Warnings/Cautions
111961.00 218 113590.00 150 113919.00 244 114216.00 254
111962.00 218 113591.00 150 113920.00 244 114222.00 244
111963.00 218 113608.00 214 113921.00 245 114223.00 244
112135.00 28 113627.00 253 113922.00 245 114224.00 244
112136.00 27 113630.00 251 113923.00 245 114225.00 244
112378.00 58 113631.00 251 113924.00 245 114226.00 244
112427.00 149 113632.00 251 113925.00 245 114227.00 244
112428.00 149 113633.00 214 113926.00 216 114228.00 244
112429.00 150 113637.00 118 113928.00 244 114229.00 244
112430.00 150 113638.00 118 113929.00 244 114231.00 244
112431.00 147 113639.00 118 113931.00 29 114233.00 244
112432.00 147 113640.00 118 113936.00 244 114304.00 245
112483.00 151 113641.00 118 113937.00 243 114306.00 245
112484.00 151 113642.00 255 113938.00 192 114307.00 245
112520.00 151 113643.00 218 113939.00 203 114308.00 245
112521.00 151 113649.00 148 113954.00 148 114309.00 75
112523.00 150 113672.00 218 113955.00 118 114310.00 147
435
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
114311.00 147 115879.00 28, 32, 252 116612.00 104 117122.00 186
114312.00 147 116128.00 37 116613.00 104 117126.00 187
AC / DC Controls
436
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
117862.00 207 119286.00 84 119471.00 148 119544.00 239
117863.00 207 119287.00 84 119472.00 148 119552.00 242
AC / DC Controls
117864.00 207 119289.00 84 119473.00 148 119553.00 268
117865.00 207 119392.00 84 119475.00 149 119554.00 268
117866.00 207 119395.00 53 119476.00 150 119555.00 268
117867.00 207 119396.00 54 119478.00 150 119556.00 268
117872.00 119 119397.00 84 119479.00 151 119561.00 274
117873.00 119 119414.00 59 119480.00 150 119562.00 274
117874.00 119 119416.00 62 119482.00 150 119563.00 275
Accessories / Kits
117875.00 119 119417.00 62 119483.00 150 119564.00 275
117876.00 119 119418.00 62 119485.00 154, 276 119565.00 275
117878.00 207 119419.00 76, 216 119486.00 154, 276 119566.00 277
117879.00 207 119420.00 107 119487.00 169 119736.00 105
117880.00 207 119421.00 105 119488.00 169 119737.00 105
117881.00 207 119422.00 107 119489.00 169 119783.00 154, 206
Mods / Factory
117883.00 205 119423.00 107 119490.00 169 119785.00 180, 276
Options
117884.00 205 119424.00 107, 120 119491.00 176 119796.00 81
117887.00 205 119425.00 105 119492.00 176 119797.00 81
117888.00 205 119426.00 105 119494.00 176 119955.00 109, 156
117889.00 205 119427.00 107 119495.00 176 119956.00 109, 156
117901.00 178 119428.00 107 119497.00 177 119957.00 109, 156
117902.00 178 119429.00 107, 120 119498.00 177 119958.00 109, 156
X-Ref / Index
117906.00 188 119430.00 107 119499.00 177 119973.00 176
117907.00 188 119431.00 107 119500.00 178 119974.00 177
118007.00 299, 313 119433.00 105 119501.00 178 119975.00 186
118008.00 299, 313 119434.00 107, 120 119502.00 178 119976.00 187
118009.00 299, 313 119435.00 107 119507.00 181, 296 120000.00 17
Tech Information
118010.00 299, 313 119436.00 108 119508.00 181, 296 120003.00 17, 249
118014.00 299, 313 119437.00 108 119509.00 181, 296 120004.00 17, 249, 251
118015.00 308 119438.00 108 119511.00 186 120008.00 24, 31, 251
118016.00 308 119439.00 108 119512.00 187 120009.00 24, 31, 251
118017.00 308 119440.00 108 119513.00 186 120017.00 27
118018.00 308 119441.00 108 119520.00 187 120025.00 24
118019.00 308 119442.00 108 119522.00 186 120026.00 24
Warnings/Cautions
118054.00 308 119443.00 108 119523.00 186 120036.00 25
118055.00 308 119448.00 203 119524.00 187 120042.00 17, 249
118056.00 308 119452.00 120 119525.00 187 120043.00 24
119090.00 117 119453.00 120 119526.00 186 120044.00 17, 249
119091.00 117 119454.00 120 119527.00 188 120060.00 27
119092.00 117 119455.00 120 119528.00 188 120063.00 41
119227.00 203 119456.00 120 119529.00 188 120067.00 18
119228.00 204 119457.00 120 119530.00 188 120073.00 19
119229.00 204 119458.00 121, 152 119531.00 188 120097.00 58
119230.00 204 119459.00 152 119533.00 201 120101.00 27
119231.00 203 119460.00 152 119534.00 202 120102.00 27
119232.00 203 119461.00 121, 152 119535.00 202 120106.00 18
119233.00 204 119462.00 152 119539.00 237 120107.00 17
119234.00 204 119463.00 121, 152 119540.00 237 120130.00 24
119266.00 186 119468.00 148 119542.00 239 120274.00 29
119267.00 186 119469.00 148 119543.00 239 120341.00 25, 253
437
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
120374.00 195, 219 121094.00 245 121874.00 176 122031.00 178
120375.00 195, 219 121095.00 245 121875.00 176 122073.00 126
AC / DC Controls
438
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
122182.00 148 122242.00 274 131507.00 246 131638.00 244
122183.00 148 122243.00 274 131508.00 246 131640.00 125
AC / DC Controls
122184.00 148, 148 122244.00 274 131509.00 25 131641.00 125
122185.00 150 122245.00 274 131515.00 18, 249 131777.00 19
122186.00 151 122246.00 274 131516.00 27 131778.00 27
122187.00 151 122247.00 274 131517.00 41 131781.00 20
122188.00 151 122248.00 275 131518.00 41 131847.00 197, 228
122189.00 151 122249.00 275 131519.00 38, 250 131848.00 197, 228
122190.00 151 122250.00 275 131520.00 38, 250 131849.00 197, 228
Accessories / Kits
122191.00 151 122251.00 275 131526.00 24 131850.00 197, 228
122192.00 154, 276 122252.00 275 131530.00 18 131851.00 18, 251
122193.00 154, 276 122253.00 275 131533.00 25 131853.00 20, 252
122194.00 154, 276 122254.00 277 131534.00 18, 249 131855.00 25, 31, 251
122195.00 154, 276 122255.00 277 131535.00 18 131856.00 25, 31, 251
122196.00 154, 276 122258.00 268 131536.00 18, 249 131857.00 29, 32, 252
Mods / Factory
122197.00 154, 276 122308.00 154, 206 131537.00 18, 249 131881.00 123
Options
122198.00 169 122329.00 126 131538.00 25 131971.00 37
122199.00 169 122330.00 151 131539.00 19 131972.00 38
122200.00 169 122337.00 81 131540.00 27 131980.00 54
122201.00 169 122338.00 81 131541.00 192, 193 131981.00 54
122202.00 177 122395.00 109, 156 131542.00 192, 193 131985.00 54
122203.00 177 122396.00 109, 156 131543.00 192 131986.00 38
X-Ref / Index
122204.00 177 122397.00 109, 156 131544.00 19 131987.00 55
122205.00 177 122411.00 196 131545.00 27 131988.00 38
122206.00 177 122412.00 198 131549.00 25 131994.00 193
122207.00 177 122472.00 154, 206 131553.00 243 131995.00 193
122208.00 180 128000.00 306 131554.00 243 132042.00 25, 31, 251
122209.00 180 128001.00 306 131555.00 243 132043.00 20
Tech Information
122210.00 180 128010.00 306 131556.00 244 132044.00 18, 249
122211.00 180 128023.00 306 131557.00 244 132073.00 125
122212.00 180 131454.00 245 131560.00 18 132079.00 62
122213.00 180 131459.00 245 131561.00 18 132080.00 63
122214.00 41 131463.00 54, 76, 250 131571.00 147 132081.00 42
122215.00 179 131464.00 55, 76, 250 131578.00 244 132082.00 42
Warnings/Cautions
122219.00 186 131468.00 224, 257 131599.00 245 132083.00 20
122221.00 188 131469.00 224, 257 131600.00 244 132196.00 149
122222.00 188 131470.00 225, 257 131601.00 244 132197.00 149
122227.00 239 131471.00 225, 257 131602.00 193 132198.00 150
122228.00 239 131472.00 225, 257 131603.00 193 132199.00 150
122229.00 239 131473.00 225, 257 131604.00 125 132200.00 150
122231.00 242 131474.00 224, 257 131605.00 125 132201.00 150
122232.00 242 131475.00 224, 257 131616.00 18 132202.00 149
122233.00 242 131480.00 245 131622.00 18, 249, 251 132203.00 176
122234.00 268 131481.00 245 131629.00 20 132204.00 149
122235.00 268 131501.00 59 131630.00 20, 252 132205.00 150
122237.00 273 131502.00 63 131631.00 29 132206.00 176
122238.00 273 131503.00 59 131632.00 29, 32, 252 132207.00 176
122239.00 273 131504.00 62 131633.00 29, 32, 252 132208.00 176
122240.00 273 131505.00 246 131636.00 18 132232.00 50
122241.00 273 131506.00 246 131637.00 25 132233.00 50
439
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
132234.00 50 132463.00 242 140485.00 41 140826.00 176
132235.00 50 132465.00 242 140486.00 60 140827.00 176
AC / DC Controls
440
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
141392.00 198 170042.60 39 170160.60 56 171480.60 60
141393.00 198 170043.60 56 170165.60 63 171507.60 60
AC / DC Controls
141394.00 198 170044.60 39 170166.60 63 171508.60 60
141409.00 186 170045.60 56 170167.60 63 171509.60 60
141410.00 186 170062.60 55 170168.60 63 171510.60 60
141411.00 186 170064.60 38 170170.60 42 171516.60 57
141412.00 186 170065.60 38 170171.60 42 171518.60 40
141427.00 193 170066.60 55, 76, 250 170172.60 42 171519.60 60
141428.00 25 170067.60 38 170173.60 42 171522.60 40
Accessories / Kits
141429.00 29 170068.60 55 170175.60 42 171523.60 40
141430.00 18, 249 170070.60 43 170196.60 237 171524.60 40
141431.00 125 170071.60 43 170197.60 237 171525.60 40
141432.00 193 170073.60 43 170198.60 238 171529.60 57
141433.00 193 170087.60 56 170199.60 238 171530.60 57
141434.00 193 170096.60 56 170212.60 237 171564.60 62
Mods / Factory
141437.00 199 170097.60 56 170224.60 238 171565.60 62
Options
163104.60 398 170098.60 56 170228.60 238 171566.60 63
163115.60 398 170099.60 56 170232.60 238 171573.60 40
163116.60 403 170104.60 64 170239.60 238 171574.60 38
163126.60 398 170108.60 64 170244.60 238 171575.60 38
170000.60 38 170110.60 64 170253.60 238 171576.60 40
170001.60 55 170112.60 64 170256.60 56 171577.60 40
X-Ref / Index
170002.60 38 170114.60 65 170259.60 40 171578.60 57
170003.60 56 170116.60 238 170260.60 57 171579.60 57
170004.60 39 170117.60 238 170269.60 39 171580.60 57
170005.60 56 170118.60 238 170352.60 57 171586.60 64
170006.60 38, 250 170119.60 238 170369.60 57 171587.60 64
Tech Information
170007.60 55, 76, 250 170120.60 238 170371.60 57 171588.60 64
170009.60 38 170121.60 238 170378.60 43 171589.60 64
170011.60 56 170122.60 55 170379.60 43 171590.60 64
170013.60 39 170123.60 55 170540.60 200, 227 171591.60 64
170015.60 56 170138.60 63 170541.60 200, 227 171592.60 64
170017.60 39 170139.60 63 170542.60 200, 227 171593.60 64
170019.60 56 170140.60 55 170615.60 55 171594.60 64
Warnings/Cautions
170021.60 39 170142.60 38 170619.60 64 171595.60 65
170023.60 56 170143.60 38 170620.60 64 171596.60 65
170025.60 39 170144.60 38 171115.60 65 171597.60 65
170027.60 56 170145.60 38 171116.60 63 171616.60 95
170029.60 39 170146.60 38 171315.60 57 171617.60 95
170031.60 56 170147.60 39 171316.60 57 171620.60 95
170032.60 38 170148.60 39 171320.60 54 171621.60 95
170033.60 55 170149.60 39 171322.60 55 171622.60 95
170034.60 38 170150.60 39 171349.60 60 171623.60 95
170035.60 56 170151.60 39 171352.60 60 171624.60 237
170036.60 39 170152.60 39 171377.60 43 171630.60 95
170037.60 56 170154.60 40 171378.60 54 171631.60 95
170038.60 39 170155.60 40 171379.60 55 171632.60 95
170039.60 56 170157.60 55 171446.60 63 171633.60 95
170040.60 39 170158.60 55 171449.60 40 171634.60 95
170041.60 56 170159.60 55 171479.60 60 171635.60 95
441
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
171636.60 95 171815.60 97 174140.00 394, 396 174266.00 373
171637.60 95 171816.60 97 174141.00 394 174267.00 373
AC / DC Controls
442
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
174405.00 396 174491.00 375 174565.00 385 174634.00 381
174406.00 396 174492.00 374 174566.00 385 174635.00 381
AC / DC Controls
174407.00 396 174493.00 375 174567.00 385 174636.00 381
174408.00 396 174494.00 375 174569.00 385 174637.00 381
174409.00 396 174495.00 375 174571.00 385 174638.00 381
174410.00 396 174497.00 375 174572.00 385 174639.00 381
174411.00 396 174500.00 375 174573.00 385 174651.00 380
174412.00 396 174510.00 386 174574.00 386 174652.00 383
174413.00 396 174511.00 386 174575.00 386 174653.00 383
Accessories / Kits
174414.00 396 174512.00 386 174580.00 385 174654.00 383
174415.00 396 174513.00 386 174581.00 386 174655.00 383
174416.00 396 174515.00 388 174582.00 385 174656.00 383
174417.00 396 174517.00 388 174583.00 386 174657.00 383
174418.00 396 174519.00 388 174584.00 385 174658.00 383
174419.00 396 174520.00 388 174585.00 386 174659.00 383
Mods / Factory
174422.00 369 174521.00 388 174586.00 385 174660.00 383
Options
174429.00 375 174525.00 388 174593.00 385 174661.00 383
174430.00 375 174526.00 388 174594.00 385 174662.00 383
174431.00 375 174527.00 387 174595.00 386 174663.00 383
174432.00 375 174528.00 387 174596.00 386 174664.00 383
174433.00 375 174529.00 387 174597.00 386 174665.00 383
174434.00 375 174530.00 387 174599.00 385 174666.00 383
X-Ref / Index
174435.00 375 174531.00 387 174603.00 380 174667.00 383
174436.00 375 174532.00 387 174604.00 380 174668.00 383
174438.00 375 174533.00 387 174605.00 380 174671.00 383
174439.00 375 174534.00 387 174606.00 380 174672.00 383
174440.00 375 174535.00 387 174607.00 380 174673.00 383
Tech Information
174441.00 375 174536.00 387 174608.00 380 174674.00 383
174442.00 375 174537.00 387 174609.00 380, 381 174675.00 383
174443.00 375 174538.00 387 174610.00 380, 381 174676.00 383
174444.00 375 174539.00 387 174611.00 380, 381 174677.00 383
174445.00 374 174540.00 383 174615.00 381 174678.00 383
174446.00 375 174542.00 383 174616.00 381 174693.00 397
174447.00 375 174544.00 383 174617.00 381 174694.00 368
Warnings/Cautions
174448.00 375 174545.00 385 174618.00 381 174695.00 368
174452.00 375 174546.00 383 174619.00 381 174696.00 368
174453.00 375 174549.00 386 174620.00 381 174697.00 397
174454.00 375 174551.00 385 174621.00 381 174699.00 383
174455.00 375 174552.00 385 174622.00 381 174700.00 383
174456.00 375 174553.00 385 174623.00 381 174701.00 383
174457.00 375 174554.00 386 174624.00 381 174702.00 383
174458.00 375 174556.00 386 174625.00 381 174703.00 383
174459.00 375 174557.00 385 174626.00 381 174704.00 383
174460.00 375 174558.00 385 174627.00 381 174709.00 364
174461.00 375 174559.00 385 174628.00 381 174710.00 381
174462.00 375 174560.00 385 174629.00 381 174711.00 381
174463.00 375 174561.00 385 174630.00 381 174729.00 388
174464.00 375 174562.00 385 174631.00 381 174730.00 386
174475.00 388 174563.00 385 174632.00 381 174732.00 387
174482.00 386 174564.00 385 174633.00 381 174734.00 386
443
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
174735.00 387 174945.00 386 175080.00 307 175304.00 400
174737.00 386 174946.00 386 175082.00 307 175305.00 127, 408, 410
AC / DC Controls
444
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
175602.60 398 175762.00 278 175847.00 412 175995.60 294
175603.60 403, 404 175763.00 278 175849.00 408 176002.00 410
AC / DC Controls
175604.60 398 175764.00 278 175850.00 294 176004.60 403, 404
175605.60 403 175765.00 278 175850.30 294 176024.00 402
175606.60 403 175766.00 278 175851.00 294 176025.00 402
175607.60 398 175767.00 278 175851.30 294 176026.00 402
175608.60 398 175768.00 278 175852.00 294 176027.00 402
175614.00 127, 408, 410 175769.00 278 175852.30 294 176028.00 402
175615.00 278 175770.00 278 175853.00 294 176029.00 402
Accessories / Kits
175619.60 294 175771.00 155, 279 175853.30 294 176030.00 402
175641.00 411 175772.00 155, 279 175854.00 294 176031.00 402
175642.00 411 175773.00 155, 279 175854.30 294 176032.00 402
175643.00 411 175775.00 410 175855.00 294 176033.00 402
175644.00 411 175777.60 294 175855.30 294 176034.00 402
175645.00 411 175778.00 408 175856.00 294 176035.00 402
Mods / Factory
175646.00 400 175784.00 300, 314 175856.30 294 176036.00 402
Options
175647.00 400 175787.00 404 175857.00 294 176037.00 402
175649.00 412 175788.00 404 175857.30 294 176038.00 402
175657.60 398 175789.00 404 175869.60 403, 404 176039.00 402
175658.60 398 175790.00 404 175871.00 405 176044.60 408
175661.00 400 175791.00 404 175872.00 405 176045.60 408
175663.60 405 175792.00 408 175873.00 405 176046.60 408
X-Ref / Index
175664.60 403, 404 175794.00 404 175874.00 405 176047.60 408
175665.60 412 175795.00 404 175875.00 405 176048.60 408
175666.60 412 175796.00 404 175879.00 410 176049.60 408
175667.60 412 175797.00 404 175880.00 410 176050.60 408
175668.60 412 175802.00 307 175881.00 412 176051.60 408
Tech Information
175674.00 410 175804.60 403 175890.60 294 176052.60 408
175675.00 410 175805.60 403, 404 175891.60 405 176053.60 408
175676.00 410 175807.60 398 175892.00 412 176054.60 408
175677.00 410 175810.60 294 175893.00 358 176055.60 408
175678.00 410 175811.60 294 175894.00 405 176056.00 404
175684.00 411 175812.60 294 175895.00 410 176057.00 404
175685.00 411 175817.60 294 175896.00 410 176058.00 404
Warnings/Cautions
175686.00 411 175818.60 294 175897.00 411 176059.00 404
175687.00 411 175819.60 294 175898.00 411 176064.00 402
175691.00 400, 401, 405 175827.60 294 175932.00 127, 410 176065.00 402
175693.00 400 175828.600 294 175955.60 398 176066.00 402
175694.00 398 175829.600 294 175956.60 398 176067.00 402
175695.00 408 175830.600 294 175957.60 398 176068.00 402
175696.00 278 175831.600 294 175958.60 403, 404 176069.00 402
175697.00 278 175832.60 294 175959.60 398 176070.00 402
175698.00 278 175833.60 294 175960.00 411 176071.00 402
175699.00 278 175834.60 294 175961.00 408 176072.00 402
175710.60 278 175835.60 294 175962.00 127, 408 176073.00 402
175711.60 278 175837.60 294 175963.00 127, 408 176074.00 402
175720.00 365 175839.60 294 175969.00 400 176075.00 402
175721.00 365 175844.00 400 175990.60 294 176076.00 402
175722.00 365 175845.00 400 175991.60 294 176077.00 402
175755.00 412 175846.00 127, 408 175994.60 294 176090.60 415
445
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
176091.60 415 176149.00 393 191207.40 172 191574.00 172
176092.60 415 176150.00 393 191208.00 173 191575.00 173
AC / DC Controls
446
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
192047.00 290 192251.30 292 193345.60 289 193396.60 293
192047.30 290 192264.00 286 193346.60 289 193397.60 293
AC / DC Controls
192048.00 290 192265.00 288 193347.60 289 193398.60 293
192049.00 290 192266.00 290 193348.60 289 193399.60 293
192088.00 292 192267.00 292 193349.60 289 193416.60 287
192088.30 292 193300.60 286 193350.60 289 193417.60 287
192089.00 292 193301.60 287 193351.60 289 193418.60 287
192097.00 292 193302.60 287 193352.60 289 193419.60 287
192098.00 292 193303.60 287 193353.60 289 193420.60 287
Accessories / Kits
192106.00 292 193304.60 287 193354.60 289 193421.60 287
192107.00 292 193305.60 287 193355.60 289 193422.60 287
192107.30 292 193306.60 287 193356.60 289 193423.60 287
192115.00 292 193307.60 287 193357.60 289 193424.60 287
192116.00 292 193308.60 287 193359.60 291 194000.00 172
192116.30 292 193309.60 287 193360.60 291 194001.00 172
Mods / Factory
192124.30 292 193310.60 287 193361.60 291 194002.00 172
Options
192125.30 292 193311.60 287 193362.60 291 194003.00 172
192133.30 292 193312.60 287 193363.60 291 194004.00 172
192200.00 286 193313.60 287 193364.60 291 194005.00 172
192201.00 288 193314.60 287 193365.60 291 194006.00 172
192202.00 286 193315.60 287 193366.60 291 194007.00 172
192202.30 286 193316.60 287 193367.60 291 194008.00 172
X-Ref / Index
192203.00 288 193317.60 287 193368.60 291 194009.00 172
192204.00 290 193318.60 287 193369.60 291 194010.00 172
192205.00 286 193319.60 287 193370.60 291 194011.00 172
192206.00 288 193320.60 287 193371.60 291 194012.00 172
192207.00 290 193321.60 287 193372.60 291 194013.00 172
Tech Information
192208.00 286 193322.60 287 193373.60 291 194014.00 172
192208.30 286 193323.60 287 193374.60 291 194015.00 172
192209.00 287 193324.60 287 193375.60 291 194120.00 131
192210.00 288 193325.60 287 193376.60 291 194121.00 131
192211.00 288 193326.60 287 193377.60 291 194127.00 131
192212.00 290 193327.60 287 193378.60 291 194181.00 258
192213.00 290 193328.60 287 193379.60 292 194182.00 258
Warnings/Cautions
192214.00 291 193329.60 287 193380.60 292 194183.00 258
192230.00 292 193330.60 287 193381.60 292 194184.00 258
192230.30 292 193331.60 287 193382.60 292 194185.00 258
192231.00 292 193332.60 287 193383.60 292 194186.00 258
192232.00 292 193333.60 288 193384.60 292 194187.00 258
192232.30 292 193334.60 288 193385.60 292 194188.00 258
192233.00 292 193335.60 288 193386.60 292 194189.00 258
192233.30 292 193336.60 289 193387.60 292 194190.00 258
192241.00 286 193337.60 289 193388.60 293 194191.00 258
192242.00 286 193338.60 289 193389.60 293 194192.00 258
192244.00 288 193339.60 289 193390.60 293 194193.00 258
192245.00 288 193340.60 289 193391.60 293 194194.00 258
192247.00 290 193341.60 289 193392.60 293 194195.00 258
192248.00 290 193342.60 289 193393.60 293 194222.00 281, 295
192250.00 292 193343.60 289 193394.60 293 194223.00 281, 295
192251.00 292 193344.60 289 193395.60 293 194224.00 281, 295
447
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
194225.00 281, 295 199054.00 71 199729.00 47 199983.00 129
194226.00 281, 295 199055.00 71 199730.00 47 199984.00 129
AC / DC Controls
448
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
810005.00 82 811564.00 94 811660.00 94 824584.00 234
810007.00 82 811565.00 94 811661.00 94 824585.00 234
AC / DC Controls
810011.00 82 811566.00 94 811662.00 94 824586.00 234
810015.00 82 811567.00 94 811663.00 94 825071.00 108
810019.00 82 811568.00 94 811664.00 94 825072.00 108
810023.00 82 811569.00 94 824528.00 233 825073.00 108
810027.00 82 811570.00 94 824529.00 233 825074.00 108
810031.00 82 811571.00 94 824530.00 233 825075.00 108
810066.00 82 811586.00 94 824531.00 233 825076.00 108
Accessories / Kits
810068.00 82 811587.00 94 824532.00 233 825077.00 108
810087.00 82 811588.00 94 824533.00 233 825078.00 108
810096.00 82 811589.00 94 824534.00 233 825079.00 108
810097.00 82 811590.00 94 824535.00 233 825080.00 108
810098.00 82 811591.00 94 824536.00 233 825081.00 108
810099.00 82 811592.00 94 824537.00 233 825082.00 108
Mods / Factory
810140.00 82 811593.00 94 824538.00 233 825083.00 108
Options
810157.00 82 811594.00 94 824539.00 233 825084.00 108
810503.00 82 811595.00 94 824540.00 233 825085.00 105
810546.00 81 811596.00 94 824541.00 233 825086.00 105
810547.00 81 811618.00 84 824542.00 233 825087.00 105
810548.00 81 811619.00 84 824543.00 233 825088.00 105
811320.00 81 811621.00 84 824544.00 233 825089.00 105
X-Ref / Index
811322.00 82 811622.00 84 824554.00 233 825090.00 105
811367.00 82 811624.00 84 824555.00 233 825091.00 105
811369.00 82 811625.00 84 824556.00 233 825092.00 105
811371.00 82 811627.00 84 824557.00 233 825093.00 105
811516.00 82 811628.00 84 824558.00 233 825094.00 105
Tech Information
811529.00 82 811630.00 84 824559.00 233 825095.00 105
811530.00 82 811631.00 84 824560.00 233 825096.00 106
811541.00 93 811633.00 84 824561.00 233 825097.00 106
811542.00 93 811635.00 84 824562.00 233 825098.00 106
811544.00 93 811637.00 84 824563.00 233 825099.00 106
811546.00 93 811639.00 85 824564.00 233 825100.00 106
811547.00 93 811640.00 85 824565.00 233 825101.00 106
Warnings/Cautions
811548.00 93 811643.00 93 824566.00 233 825102.00 106
811549.00 93 811644.00 93 824567.00 233 825103.00 106
811550.00 93 811646.00 93 824568.00 233 825104.00 106
811551.00 93 811647.00 93 824569.00 233 825105.00 106
811552.00 93 811648.00 93 824570.00 233 825106.00 106
811553.00 93 811649.00 93 824573.00 234 825107.00 106
811554.00 93 811650.00 93 824574.00 234 825108.00 106
811555.00 93 811651.00 93 824575.00 234 825109.00 106
811556.00 93 811652.00 93 824576.00 234 825110.00 106
811557.00 93 811653.00 93 824577.00 234 825111.00 106
811558.00 93 811654.00 93 824578.00 234 825112.00 106
811559.00 93 811655.00 93 824579.00 234 825113.00 106
811560.00 94 811656.00 94 824580.00 234 825114.00 106
811561.00 94 811657.00 94 824581.00 234 825115.00 106
811562.00 94 811658.00 94 824582.00 234 825116.00 107
811563.00 94 811659.00 94 824583.00 234 825125.00 108
449
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
825126.00 108 A009581.00 208, 230 B176200.00 406 B194230.00 74
825127.00 108 A009594.00 208, 230 B176201.00 399 B194231.00 74
AC / DC Controls
450
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
B199015.00 67 B199065.00 72 B199706.00 45 B199758.00 49
B199016.00 67 B199066.00 72 B199707.00 45 B199759.00 49
AC / DC Controls
B199017.00 67 B199067.00 72 B199708.00 45 B199763.00 126
B199018.00 67 B199068.00 72 B199709.00 45 B199765.00 126
B199019.00 67 B199069.00 72 B199710.00 45 B199766.00 128
B199020.00 67 B199070.00 72 B199711.00 45 B199767.00 128
B199021.00 68 B199071.00 72 B199712.00 45 B199768.00 128
B199022.00 68 B199072.00 72 B199713.00 45 B199769.00 128
B199023.00 68 B199073.00 72 B199714.00 45 B199773.00 124
Accessories / Kits
B199024.00 68 B199074.00 72 B199715.00 45 B199775.00 126
B199025.00 68 B199075.00 72 B199716.00 46 B199777.00 126
B199026.00 68 B199076.00 72 B199717.00 46 B199779.00 128
B199027.00 68 B199082.00 73 B199718.00 46 B199780.00 128
B199028.00 68 B199083.00 73 B199719.00 46 B199781.00 129
B199029.00 68 B199084.00 73 B199720.00 46 B199782.00 129
Mods / Factory
B199030.00 68 B199085.00 73 B199721.00 46 B199783.00 124
Options
B199031.00 68 B199086.00 73 B199722.00 46 B199784.00 124
B199032.00 68 B199087.00 73 B199723.00 46 B199785.00 124
B199033.00 69 B199088.00 73 B199724.00 46 B199786.00 124
B199034.00 69 B199089.00 73 B199725.00 47 B199787.00 130
B199035.00 69 B199090.00 126 B199726.00 47 B199788.00 130
B199036.00 69 B199091.00 126 B199727.00 47 B199789.00 130
X-Ref / Index
B199037.00 69 B199092.00 130 B199728.00 47 B199816.00 49
B199038.00 69 B199093.00 130 B199729.00 47 B199964.00 126
B199039.00 69 B199094.00 130 B199730.00 47 B199965.00 127
B199040.00 69 B199095.00 130 B199731.00 47 B199966.00 127
B199041.00 69 B199096.00 130 B199732.00 47 B199967.00 127
Tech Information
B199042.00 69 B199589.00 126 B199733.00 47 B199968.00 127
B199043.00 69 B199590.00 126 B199735.00 48 B199969.00 127
B199044.00 69 B199685.00 44 B199736.00 48 B199970.00 127
B199045.00 70 B199686.00 44 B199737.00 48 B199971.00 127
B199046.00 70 B199687.00 44 B199738.00 48 B199972.00 127
B199047.00 70 B199688.00 44 B199739.00 48 B199973.00 127
B199048.00 70 B199689.00 44 B199740.00 48 B199974.00 127
Warnings/Cautions
B199049.00 70 B199690.00 44 B199741.00 48 B199975.00 129
B199050.00 70 B199691.00 44 B199742.00 48 B199976.00 129
B199051.00 71 B199692.00 44 B199743.00 48 B199977.00 129
B199052.00 71 B199693.00 44 B199744.00 48 B199978.00 129
B199053.00 71 B199694.00 44 B199745.00 48 B199979.00 129
B199054.00 71 B199695.00 44 B199746.00 48 B199980.00 129
B199055.00 71 B199696.00 44 B199747.00 48 B199981.00 129
B199056.00 71 B199697.00 44 B199748.00 49 B199982.00 129
B199057.00 71 B199698.00 44 B199749.00 49 B199983.00 129
B199058.00 71 B199699.00 44 B199750.00 49 B199984.00 129
B199059.00 71 B199700.00 44 B199751.00 49 B199985.00 129
B199060.00 71 B199701.00 45 B199752.00 49 B199986.00 129
B199061.00 71 B199702.00 45 B199753.00 49 B199987.00 124
B199062.00 71 B199703.00 45 B199754.00 49 B199988.00 124
B199063.00 71 B199704.00 45 B199755.00 49 B199989.00 124
B199064.00 71 B199705.00 45 B199756.00 49 B199990.00 124
451
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
B199991.00 124 E100378.00 41 E110360.00 17 E115826.00 38
B199992.00 124 E100446.00 37 E110361.00 17 E115827.00 37
AC / DC Controls
452
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
E175927.00 83, 411 EXG150015.60 269 G151355.22 55 GT0079 45
E175928.00 83, 411 EXG150019.60 269 G151356.22 55 GT0080 46
AC / DC Controls
E175929.00 83, 411 EXG150023.60 269 G151686.60 41 GT0081 46
E175930.00 83, 411 EXG150027.60 269 G151687.60 41 GT0083 46
E175931.00 83, 411 EXG150031.60 269 G151736.60 130 GT0084 46
ECB175926.00 83, 411 EXG150033.60 269 G151737.60 130 GT0086 46
EEPM1RA 395 EXG150035.60 269 G151738.60 130 GT0110 44
EX120024.00 270 EXG150062.60 269 GT0005A 44 GT0113 44
EX120037.00 270 EXG150066.60 269 GT0008A 44 GT0116 44
Accessories / Kits
EX120038.00 270 EXG150080.60 270 GT0010A 44 GT0119 44
EX121035.00 270 EXG150081.60 270 GT0011A 44 GT0146 46
EX131491.00 270 EXG150082.60 270 GT0012A 44 GT0149 47
EX131492.00 270 EXG150083.60 270 GT0013A 44 GT0152 47
EX131528.00 270 EXG150084.60 270 GT0014A 44 GT0155 47
EX131606.00 270 EXG150085.60 270 GT0015A 44 GT0159 44
Mods / Factory
EX140109.00 270 EXG150086.60 270 GT0016A 44 GT0162 45
Options
EX151346.60 270 EXG150087.60 269 GT0018A 44 GT0165 45
EX151348.60 270 EXG150102.60 270 GT0019A 44 GT0167 45
EX151350.60 270 EXG150140.60 269 GT0021A 44 GT0173 45
EX151352.60 270 EXG150157.60 269 GT0041A 46 GT0177 45
EX151507.60 270 EXG150158.60 269 GT0044A 46 GT0181 46
EX151508.60 270 EXG150159.60 269 GT0046A 46 GT0184 46
X-Ref / Index
EX151509.60 270 EXG150165.60 270 GT0047A 46 GT0210 48
EX151510.60 270 EXG150167.60 270 GT0048A 47 GT0212 48
EX151519.60 270 EXG150299.60 269 GT0049A 47 GT0213 48
EXG120014.00 269 EXG150352.60 269 GT0050A 47 GT0215 48
EXG120015.00 269 EXG151317.60 269 GT0051A 47 GT0216 48
Tech Information
EXG120016.00 269 EXG151318.60 269 GT0052A 47 GT0218 48
EXG120086.00 269 EXG151320.60 269 GT0053A 47 GT0219 48
EXG120088.00 269 EXG151322.60 269 GT0054A 47 GT0221 48
EXG120185.00 269 EXG151369.60 269 GT0055A 47 GT0246 49
EXG120276.00 270 EXG151371.60 269 GT0056A 47 GT0259 48
EXG121286.00 270 EXG151563.60 269 GT0057 44 GT0261 48
Warnings/Cautions
EXG121287.00 270 EXG151565.60 270 GT0058 44 GT0262 48
EXG130008.00 269 EXG151566.60 270 GT0059 44 GT0264 48
EXG130027.00 269 EXG151680.60 270 GT0060 44 GT0265 48
EXG130099.00 269 EXG151696.60 269 GT0061 45 GT0267 49
EXG130101.00 269 EXG151698.60 269 GT0062 45 GT0269 49
EXG130103.00 269 EXG151702.60 269 GT0063 45 GT0272 49
EXG130326.00 270 EXG151703.60 269 GT0064 45 GT0273 49
EXG130328.00 270 EXG151704.60 269 GT0065 45 GT0276 49
EXG131082.00 269 G121627.00 180 GT0067 45 GT0277 49
EXG140147.00 270 G121748.00 186 GT0068 45 GT0280 49
EXG140183.00 270 G131967.00 151 GT0069 45 GT0281 49
EXG140489.00 269 G140108.00 41 GT0071 45 GT0283 49
EXG140578.00 269 G140738.00 148 GT0072 45 GT0284 49
EXG140686.00 269 G150261.22 55 GT0073 45 GT0286 49
EXG140687.00 269 G150263.22 55 GT0075 45 GT0410A 126
EXG150007.60 269 G150265.22 56 GT0076 45 GT0412A 126
EXG150011.60 269 G150282.22 55 GT0077 45 GT0413A 126
453
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
GT0415A 126 GT1032A 68 GT1122A 67 GT1231A 72
GT0416A 126 GT1033A 68 GT1123A 67 GT1233A 72
AC / DC Controls
454
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
GT2421A 124 GT3212A 128 GT3527A 131 KIT 324-365CPL1.438 134
GT2459 124 GT3213A 128 GT3528A 131 KIT 324-365CPL1.501 134
AC / DC Controls
GT2461 124 GT3215A 128 GT3530A 131 KIT 360VTPDC12 137
GT2462 124 GT3216A 128 GT3531A 131 KIT 360VTPDC16 137
GT2464 124 GT3218A 129 GT3533A 131 KIT 364/5BSH1.000 136
GT2465 124 GT3219A 129 GT3534A 131 KIT 364/5BSH1.126 136
GT2467 124 GT3221A 129 GT3536A 131 KIT 364/5BSH1.187 136
GT2469 124 GT3222A 129 GT3537A 131 KIT 364/5BSH1.250 136
GT2472 124 GT3224A 129 KIT 210VTPDC10 137 KIT 364/5BSH1.437 136
Accessories / Kits
GT2473 124 GT3225A 129 KIT 210VTPDC12 137 KIT 364/5BSH1.500 136
GT2476 124 GT3227A 129 KIT 213/5CPL.751 134 KIT 400VTPDC16 137
GT2477 124 GT3228A 129 KIT 213/5CPL1.001 134 KIT 400VTPDC20 137
GT2515A 124 GT3230A 129 KIT 213-256BSH.750 136 KIT 404/5CPL1.001B 134
GT2516A 124 GT3231A 129 KIT 213-256BSH.875 136 KIT 404/5CPL1.188 134
GT2518A 124 GT3233A 129 KIT 213-256BSH.937 136 KIT 404/5CPL1.251 134
Mods / Factory
GT2519A 124 GT3234A 129 KIT 213-256BSH1.000 136 KIT 404/5CPL1.438 134
Options
GT2521A 124 GT3236A 129 KIT 250VTPDC10 137 KIT 404/5CPL1.501 134
GT2559 124 GT3237A 129 KIT 250VTPDC12 137 KIT 404/5CPL1.688 134
GT2561 124 GT3409A 130 KIT 250VTPDC16 137 KIT 404/5CPL1.751 134
GT2562 124 GT3410A 130 KIT 254/256BSH1.187 136 KIT 404-445BSH1.000 136
GT2564 124 GT3412A 130 KIT 254/256BSH1.250 136 KIT 404-445BSH1.187 136
GT2565 124 GT3413A 130 KIT 254/6CPL1.001 134 KIT 404-445BSH1.250 136
X-Ref / Index
GT2567 124 GT3415A 130 KIT 254/6CPL1.001B 134 KIT 404-445BSH1.437 136
GT2569 124 GT3416A 130 KIT 254/6CPL1.188 134 KIT 404-445BSH1.500 136
GT2572 124 GT3418A 130 KIT 254/6CPL1.251 134 KIT 404-445BSH1.687 136
GT2573 124 GT3419A 130 KIT 280VTPDC10 137 KIT 404-445BSH1.750 136
GT2576 124 GT3421A 131 KIT 280VTPDC12 137 KIT 444/5CPL1.188 134
KIT 280VTPDC16 KIT 444/5CPL1.188B
Tech Information
GT2577 124 GT3422A 131 137 134
GT3109A 128 GT3424A 131 KIT 284/6BSH.750 136 KIT 444/5CPL1.501 134
GT3110A 128 GT3425A 131 KIT 284/6BSH.875 136 KIT 444/5CPL1.688 134
GT3112A 128 GT3427A 131 KIT 284/6BSH1.000 136 KIT 444/5CPL1.751 134
GT3113A 128 GT3428A 131 KIT 284/6BSH1.187 136 KIT 444/5CPL1.938 134
GT3115A 128 GT3430A 131 KIT 284/6BSH1.250 136 KIT 444/5VTPDC16 137
GT3116A 128 GT3431A 131 KIT 284/6CPL.751B 134 KIT 444/5VTPDC20 137
Warnings/Cautions
GT3118A 129 GT3433A 131 KIT 284/6CPL1.001 134 KIT 444/5VTPDC24 137
GT3119A 129 GT3434A 131 KIT 284/6CPL1.188 134 KIT 447/9BSH1.437 136
GT3121A 129 GT3436A 131 KIT 284/6CPL1.251 134 KIT 447/9BSH1.500 136
GT3122A 129 GT3437A 131 KIT 320VTPDC12 137 KIT 447/9BSH1.687 136
GT3124A 129 GT3509A 130 KIT 320VTPDC16 137 KIT 447/9BSH1.750 136
GT3125A 129 GT3510A 130 KIT 324/6BSH1.000 136 KIT 447/9BSH1.937 136
GT3127A 129 GT3512A 130 KIT 324/6BSH1.126 136 KIT 447/9BSH2.000 136
GT3128A 129 GT3513A 130 KIT 324/6BSH1.187 136 KIT 447/9BSH2.062 136
GT3130A 129 GT3515A 130 KIT 324/6BSH1.250 136 KIT 447/9BSH2.125 136
GT3131A 129 GT3516A 130 KIT 324/6BSH1.437 136 KIT 447/9BSH2.187 136
GT3133A 129 GT3518A 130 KIT 324/6BSH1.500 136 KIT 447/9BSH2.250 136
GT3134A 129 GT3519A 130 KIT 324-365CPL1.001 134 KIT 447/9BSH2.375 136
GT3136A 129 GT3521A 131 KIT 324-365CPL1.001B 134 KIT 447/9BSH2.437 136
GT3137A 129 GT3522A 131 KIT 324-365CPL1.188 134 KIT 447/9BSH2.500 136
GT3209A 128 GT3524A 131 KIT 324-365CPL1.251A 134 KIT 447/9CPL1.501 134
GT3210A 128 GT3525A 131 KIT 324-365CPL1.251B 134 KIT 447/9CPL1.501B 134
455
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
KIT 447/9CPL1.688 134 LM13724 64 LM15121 238 LM16774 64
KIT 447/9CPL1.938 134 LM13726 64 LM15122 238 LM16828 60
AC / DC Controls
456
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
LM20041 240 LM21208 86 LM21883 115 LM24103 53
LM20043 240 LM21211 86 LM21886 115 LM24104 61
AC / DC Controls
LM20044 240 LM21214 86 LM21890 115 LM24105 53
LM20086 238 LM21217 86 LM21893 115 LM24107 53
LM20087 240 LM21220 86 LM21896 115 LM24114 61
LM20088 240 LM21223 86 LM22093 414 LM24128 58
LM20116 405 LM21227 86 LM22188 414 LM24129 61
LM20389 113 LM21230 86 LM22645 87 LM24133 53
LM20390 113 LM21233 86 LM22649 87 LM24134 61
Accessories / Kits
LM20391 113 LM21236 86 LM22653 87 LM24136 53
LM20392 113 LM21238 86 LM22655 87 LM24140 61
LM20394 113 LM21239 86 LM22657 87 LM24151 58
LM20707 113 LM21378 113 LM22659 87 LM24154 237
LM20708 113 LM21379 113 LM22660 86 LM24165 53
LM20709 113 LM21380 113 LM22661 87 LM24169 38, 250
Mods / Factory
LM21084 113 LM21381 113 LM22665 87 LM24190 38
Options
LM21085 113 LM21384 113 LM22759 40 LM24193 38, 250
LM21087 113 LM21385 113 LM22826 87 LM24194 38, 250
LM21088 114 LM21388 114 LM22827 87 LM24199 38, 250
LM21089 114 LM21391 114 LM22830 87 LM24202 38, 250
LM21091 114 LM21665 113 LM22833 87 LM24208 55, 76, 250
LM21092 114 LM21799 114 LM22836 87 LM24209 55
X-Ref / Index
LM21093 114 LM21807 114 LM22839 87 LM24222 38, 250
LM21094 114 LM21826 115 LM22841 87 LM24258 111
LM21118 88 LM21827 115 LM22909 98 LM24259 112
LM21121 88 LM21828 115 LM23781 114 LM24262 112
LM21124 88 LM21829 115 LM23782 114 LM24264 81
Tech Information
LM21127 88 LM21831 115 LM23783 114 LM24265 61
LM21148 88 LM21832 115 LM23784 114 LM24266 111
LM21151 88 LM21833 115 LM24057 401 LM24268 111
LM21153 88 LM21836 115 LM24059 401 LM24273 61
LM21157 88 LM21840 115 LM24060 401 LM24276 53
LM21159 88 LM21841 115 LM24061 401 LM24277 42
LM21162 88 LM21843 115 LM24062 401 LM24291 53
Warnings/Cautions
LM21165 88 LM21844 115 LM24063 401 LM24295 237
LM21168 88 LM21845 115 LM24064 401 LM24354 239
LM21171 88 LM21846 115 LM24065 401 LM24355 239
LM21180 88 LM21847 115 LM24066 401 LM24443 195, 226
LM21189 86 LM21848 115 LM24067 401 LM24444 195, 226
LM21190 86 LM21850 115 LM24068 401 LM24445 195, 226
LM21192 86 LM21851 115 LM24069 401 LM24446 195, 226
LM21193 86 LM21853 115 LM24072 114 LM24447 195, 226
LM21195 86 LM21854 115 LM24073 53 LM24448 195, 226
LM21196 86 LM21856 115 LM24074 61 LM24449 195, 226
LM21198 86 LM21857 115 LM24075 53 LM24450 195, 226
LM21199 86 LM21859 115 LM24076 61 LM24462 205
LM21201 86 LM21862 115 LM24077 58 LM24463 205
LM21202 86 LM21866 115 LM24083 58 LM24486 210, 232
LM21204 86 LM21872 115 LM24093 58 LM24487 210, 232
LM21205 86 LM21877 115 LM24102 53 LM24488 209, 231
457
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
LM24491 209, 231 LM24726 28 LM24946 61 LM27971 265
LM24492 209, 231 LM24727 28 LM24949 61 LM27976 263
AC / DC Controls
458
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
LM28200 264 LM29662 267 LM30723 263 LM32405 415
LM28201 264 LM29663 267 LM30724 263 LM32407 415
AC / DC Controls
LM28202 264 LM29664 267 LM30725 263 LM32409 415
LM28203 264 LM29665 267 LM30727 88 LM32411 415
LM28204 264 LM29666 267 LM30732 264 LM32649 42
LM28205 264 LM29667 267 LM30733 264 LM32651 260, 261
LM28206 264 LM29668 267 LM30734 264 LM32652 64
LM28207 264 LM29669 267 LM30735 264 LM32653 65
LM28208 264 LM29670 267 LM30736 264 LM32654 64
Accessories / Kits
LM28209 264 LM29671 267 LM30737 264 LM32655 43
LM28210 264 LM29672 267 LM30739 264 LM32656 43
LM28211 264 LM29673 267 LM30740 264 LM32657 43
LM28212 264 LM29850 259, 261 LM30748 264 LM32659 65, 65
LM28213 264 LM29851 259, 261 LM30749 264 LM32660 65, 65
LM28214 264 LM29852 260, 261 LM30750 264 LM32663 260, 261
Mods / Factory
LM28215 264 LM29853 260, 261 LM30751 264 LM32665 65
Options
LM28216 264 LM29936 88 LM30752 264 LM32669 56
LM28217 264 LM30092 259, 261 LM30753 264 LM32671 56
LM28218 264 LM30093 259, 261 LM30754 264 LM32672 56
LM28219 264 LM30094 259, 261 LM30755 264 LM32674 39
LM28220 265 LM30095 259, 261 LM30756 265 LM32677 43
LM28221 265 LM30096 259, 261 LM30757 265 LM32679 57
X-Ref / Index
LM28222 265 LM30097 259, 261 LM30760 264 LM32682 39
LM28223 265 LM30098 259, 261 LM30762 265 LM32686 56
LM28224 265 LM30099 260, 261 LM30763 265 LM32687 39
LM28501 404 LM30100 260, 261 LM30764 265 LM32691 242
LM28624 404 LM30102 260, 261 LM30881 265 LM32731 38
Tech Information
LM28867 259, 261 LM30146 405 LM31014 404 LM32740 38
LM28868 259, 261 LM30147 405 LM31019 404 LM32741 54, 76, 250
LM28873 259, 261 LM30535 262 LM31393 262 LM32743 38
LM28874 259, 261 LM30561 265 LM31463 85 LM32746 38
LM28879 259, 261 LM30572 85 LM31607 264 LM32748 38
LM28880 259, 261 LM30647 263 LM31752 265 LM32749 39
LM28897 260, 261 LM30648 263 LM31777 267 LM32750 39
Warnings/Cautions
LM28898 260, 261 LM30649 263 LM32143 40 LM32751 39
LM28903 260, 261 LM30650 263 LM32284 404 LM32752 39
LM28904 260, 261 LM30655 264 LM32285 404 LM32753 39
LM28909 260, 261 LM30663 264 LM32286 404 LM32754 39
LM28910 260, 261 LM30676 262 LM32288 404 LM32755 39
LM28914 260, 261 LM30677 262 LM32290 404 LM32756 39
LM28968 55 LM30678 262 LM32291 404 LM32757 39
LM29576 38 LM30679 262 LM32292 404 LM32758 40
LM29577 39 LM30680 262 LM32293 404 LM32759 40
LM29579 88 LM30681 262 LM32396 415 LM32760 40
LM29656 267 LM30682 262 LM32397 415 LM32761 40
LM29657 267 LM30696 242 LM32398 415 LM32778 42
LM29658 267 LM30702 265 LM32399 415 LM32781 42
LM29659 267 LM30720 263 LM32401 415 LM32783 43
LM29660 267 LM30721 263 LM32402 415 LM32785 43
LM29661 267 LM30722 263 LM32403 415 LM32786 43
459
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
LM32787 43 LM33124 54 LM34062 241 LM34169 61
LM32788 43 LM33125 54 LM34063 241 LM34170 62
AC / DC Controls
460
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
LM34381 99 LM80075 140 LM80128 138 LM80180 139
LM34382 99 LM80076 140 LM80129 139 LM80182 139
AC / DC Controls
LM34432 238 LM80077 140 LM80130 139 LM80183 141
LM34481 17 LM80078 140 LM80131 139 LM80184 141
LM34528 57 LM80079 140 LM80132 139 LM80185 141
LM34555 57 LM80080 140 LM80133 139 LM80186 141
LM34573 57 LM80081 140 LM80134 139 LM80187 141
LM80018 141 LM80082 141 LM80135 139 LM80188 141
LM80020 141 LM80083 141 LM80136 139 LM80189 141
Accessories / Kits
LM80022t 141 LM80084 141 LM80137 139 LM80190 141
LM80027 141 LM80085 141 LM80138 139 LM80191 141
LM80028 141 LM80086 141 LM80139 139 LM80192 141
LM80029 141 LM80087 141 LM80140 139 LM80193 141
LM80030 141 LM80088 141 LM80141 139 LM80194 141
LM80031 141 LM80089 141 LM80142 139 LM80195 141
Mods / Factory
LM80032 141 LM80090 141 LM80143 139 LM80196 141
Options
LM80033 141 LM80091 141 LM80144 139 LM80197 141
LM80034 141 LM80092 141 LM80145 139 LM80198 141
LM80035 141 LM80093 141 LM80146 139 LM80199 141
LM80036 141 LM80094 141 LM80147 139 LM80200 141
LM80037 141 LM80095 141 LM80148 139 LM80201 141
LM80039 141 LM80096 141 LM80149 139 LM80202 141
X-Ref / Index
LM80041 141 LM80098 141 LM80150 139 LM80203 141
LM80043 141 LM80100 141 LM80151 139 LM80204 141
LM80045 141 LM80102 141 LM80152 139 LM80238 139
LM80047 141 LM80103 138 LM80153 139 LM80239 139
LM80049 141 LM80104 138 LM80154 139 LM80240 139
Tech Information
LM80050 140 LM80105 138 LM80155 139 LM80241 139
LM80051 140 LM80106 138 LM80156 139 LM80242 139
LM80053 140 LM80107 138 LM80157 139 LM80243 139
LM80055 140 LM80108 138 LM80158 139 LM80244 139
LM80056 140 LM80109 138 LM80159 139 LM80245 139
LM80057 140 LM80110 138 LM80160 139 LM80260 138
Warnings/Cautions
LM80058 140 LM80111 138 LM80161 139 LM80261 138
LM80059 140 LM80112 138 LM80162 139 LM80262 138
LM80060 140 LM80113 138 LM80163 139 LM80263 138
LM80061 140 LM80114 138 LM80164 139 LM80264 138
LM80062 140 LM80115 138 LM80165 139 LM80265 138
LM80063 140 LM80116 138 LM80166 139 LM80266 138
LM80064 140 LM80117 138 LM80167 139 LM80267 138
LM80065 140 LM80118 138 LM80168 139 LM80268 138
LM80066 140 LM80119 138 LM80169 139 LM80269 138
LM80067 140 LM80120 138 LM80170 139 LM80270 139
LM80068 140 LM80121 138 LM80171 139 LM80271 139
LM80069 140 LM80122 138 LM80172 139 LM80272 139
LM80070 140 LM80123 138 LM80173 139 LM80273 139
LM80071 140 LM80124 138 LM80174 139 M002256.00 207
LM80072 140 LM80125 138 LM80175 139 M099251.00 220
LM80073 140 LM80126 138 LM80176 139 M099260.00 194
LM80074 140 LM80127 138 LM80178 139 M099261.00 194
461
Gearmotors LEESON® Catalog Number Index
Motors, Sub-FHP Gearmotors, Drives and Accessories
Catalog No. Page # Catalog No. Page # Catalog No. Page # Catalog No. Page #
M1110003.00 310 M1125036.00 329 M1125263.00 162, 343 M1135038.00 339
M1110006.00 319 M1125037.00 329 M1125264.00 162, 343 M1135039.00 339
AC / DC Controls
462
LEESON® Catalog Number Index
Gearmotors
Motors, Sub-FHP Gearmotors, Drives and Accessories
AC / DC Controls
M1135249.00 339, 339 M1145138.00 161, 351
M1135250.00 339, 339 M1145139.00 161, 351
M1135251.00 339, 339 M1145140.00 161, 351
M1135252.00 339, 339 M1145141.00 166, 357
M1135284.00 341 M1145142.00 166, 357
M1135285.00 341 M1145143.00 166, 357
Accessories / Kits
M1135286.00 341 M1145144.00 161, 351
M1135287.00 341 M1145145.00 161, 351
M1135288.00 341 M1145146.00 166, 357
M1135289.00 341 M1145147.00 166, 357
M1135290.00 341 M1740005.00 365
M1135291.00 341 M1740005.01 365
M1135292.00 341 M1740005.02 365
Mods / Factory
M1135293.00 341 M1740007.00 365
Options
M1135294.00 341 M1740009.00 365
M1135295.00 341 M1760000.00 358
M1135296.00 341 M1760003.00 358
M1135297.00 341 M1760006.00 358
M1140171.00 77, 89 M1760007.00 358
X-Ref / Index
M1140172.00 77, 89 M1760011.00 358
M1140173.00 77, 89 M1760012.00 358
M1145023.00 351 M1760021.00 358
M1145024.00 351 M1760029.00 358
M1145025.00 351 M900195.00 222
M1145026.00 351 M900196.00 222
Tech Information
M1145027.00 351 M900197.00 222
M1145028.00 351 M900277.00 222
M1145029.00 351 M900599.00 222
M1145030.00 351
M1145031.00 351
M1145032.00 351
Warnings/Cautions
M1145033.00 351
M1145034.00 351
M1145035.00 351
M1145037.00 356
M1145038.00 356
M1145039.00 356
M1145040.00 356
M1145041.00 356
M1145082.00 356
M1145122.00 360
M1145123.00 360
M1145124.00 360
M1145125.00 360
M1145126.00 360
M1145127.00 361
M1145128.00 361
M1145129.00 361
463
Gearmotors Technical Information
MOTOR SELECTION
Electric motors are the workhorses of industry. Many applications exist NAMEPLATE DATA
where more than one motor can be used and/or the exact replacement Nameplate data is the most important first step in determining motor
is not available. Regal makes every effort to maximize interchangeability, replacement. Much of the information needed can generally be obtained
mechanically and electrically, where compromise does not interfere with from the nameplate of the motor to be replaced. Take time to record all
reliability and safety standards. If you are not certain of a replacement
AC / DC Controls
the nameplate information because it can save time, avoid confusion and
condition, contact any LEESON Authorized Distributor or the LEESON MISAPPLICATION.
District Sales Office.
MOTOR TYPE
SELECTION
Alternating current (AC) induction motors are divided into two electrical
Identifying a motor for replacement purposes or specifying a motor for categories, based on power source—single phase and polyphase (three
new applications can be done easily if the following information is known: phase). Direct current (DC) motors are used in applications where precise
1. Nameplate Data 3. Electrical and Performance Characteristics speed control is required or when battery or generated direct current is
2. Motor Type 4. Mechanical Construction the available power source.
Accessories / Kits
winding during full load operation. This type of design has lower full-load
amps as a result of the run capacitor and is consequently used on most B performance levels, and have efficiencies equal to EPAct mandated
higher horsepower single phase motors. levels. EPAct exempt three phase, base-mounted motors are labeled
Design C and have performance characteristics meeting NEMA’s Design
Permanent Split Capacitor (PSC) C standards, with standard motor efficiencies. Motors 250 HP and
larger are exempt from EPAct legislation.
This design has an auxiliary winding with a “run”
capacitor, but unlike the capacitor start/induction
run motor, the capacitor and auxiliary winding Permanent Magnet DC
remain in the circuit under running conditions. This design has linear speed/torque
Tech Information
(There is no centrifugal switch on this type motor.) characteristics over the entire speed range.
A permanent split capacitor design has low SCR rated motor features include high start-
starting torque and low starting current. They are ing torque for heavy load applications and
generally used on direct-drive fans and blowers. dynamic braking, variable speed and revers-
They can also be designed for higher starting ing capabilities. Designs are also available for
torque and intermittent applications, where rapid use on generated low voltage DC power or
reversing is desired. remote applications requiring battery power.
Warnings/Cautions
ELECTRICAL AND PERFORMANCE CHARACTERISTICS TOTALLY ENCLOSED NON-VENTILATED (TENV): No vent openings,
tightly enclosed to prevent the free exchange of air, but not airtight. Has
One of the best ways to guarantee economical performance and long
no external cooling fan and relies on convection for cooling. Suitable
motor life is to make sure your motors operate at nameplate voltage.
for use where exposed to dirt or dampness, but not for hazardous
Applying too high a voltage may reduce the motor’s efficiency and
(explosive) locations.
increase operating temperatures. The net result is shorter motor life.
Under-voltage can also shorten motor life. Operating on too low a voltage TOTALLY ENCLOSED FAN COOLED (TEFC): Same as the TENV except
reduces the motor’s effective horsepower. The motor will attempt to drive has external fan as an integral part of the motor, to provide cooling by
the load it was intended to drive, become overloaded, draw more current blowing air around the outside frame of the motor.
than normal, and overheat. Again, the result will be premature failure.
TOTALLY ENCLOSED, HOSTILE AND SEVERE ENVIRONMENT
MOTORS: Designed for use in extremely moist or chemical
ENCLOSURES AND ENVIRONMENT environments, but not for hazardous locations.
DRIP-PROOF: Venting in end frame and/or main frame located to prevent
drops of liquid from falling into motor within a 15˚ angle from vertical. TOTALLY ENCLOSED BLOWER COOLED MOTORS (TEBC): Used
Designed for use in areas that are reasonably dry, clean, and well venti- to extend the safe speed range of inverter-fed motors. Similar to TEFC
lated (usually indoors). If installed outdoors, it is recommended that the except a small, constant-speed fan provides uniform airflow regardless of
motor be protected with a cover that does not restrict the flow of air to the the drive motor’s operating speed.
motor.
EXPLOSION-PROOF MOTORS: These motors meet Underwriters
TOTALLY ENCLOSED AIR OVER (TEAO): Dust-tight fan and blower duty Laboratories and Canadian Standards Association standards for use in
motors designed for shaft mounted fans or belt driven fans. The motor hazardous (explosive) locations, as indicated by the UL label affixed to
must be mounted within the airflow of the fan. the motor. Locations are considered hazardous because the atmosphere
doesor may contain gas, vapor, or dust in explosive quantities.
Gearmotors
NEMA® SERVICE FACTORS METRIC (IEC®) DESIGNATIONS
The International Electrotechnical Commission (IEC) is a European-based
RPM organization that publishes and promotes worldwide mechanical and
HP Enclosure electrical standards for motors, among other things. In simple terms,
3600 1800 1200 it can be said that IEC is the international counterpart to the National
1/4 -1/3 Open 1.35 1.35 1.35 Electrical Manufacturers Association (NEMA), which publishes the motor
AC / DC Controls
1/2 - 3/4 Open 1.25 1.25 1.25 standards used in the United States.
1 & Larger Open 1.15 1.15 1.15 IEC standards are expressed in metric units.
All Totally Enclosed 1.00 1.00 1.00
IEC ENCLOSURE PROTECTION INDEXES
Most LEESON® Totally Enclosed Motors have 1.15 Service Factor. Refer Like NEMA, IEC has designations indicating the protection provided by
to the Service Factor information on each page to identify specific totally a motor’s enclosure. However, where NEMA designations are word
enclosed motors with NEMA 1.00 Service Factor or LEESON 1.15 Service descriptive, such as Open Drip-Proof or Totally Enclosed Fan Cooled.
Accessories / Kits
Factor. All drip-proof motors have NEMA Service Factors of 1.15 or higher. IEC uses a two-digit Index of Protection (IP) designation. The first digit
All three phase totally enclosed motors have NEMA Service Factors of indicates how well-protected the motor is against the entry of solid
1.15 except when noted (). objects, the second digit refers to water entry.
By way of general comparison, an IP22 motor relates to Open Drip-
Proof, IP54 to totally enclosed.
SCR PM DC MOTORS ON PWM POWER SUPPLIES
Pulse width modulated DC controls have a voltage output similar
to pure direct current which has a form factor of 1.00. SCR thyristor
drives, such as the SPEEDMASTER® controls, have a form factor of Protection Against Protection Against
1.4. Solid Objects Liquids
Mods / Factory
LEESON® stock SCR rated motors can also be used with PWM No. Definition No. Definition
Options
controls. In fact, the motor’s HP rating can be increased because of 0 No protection 0 No protection
less heating in the motor. In addition, the motor will operate quieter
and the brush life will be extended. 1 Protected against solid 1 Protected against
objects of over 50 mm water vertically dripping
(e.g. accidental hand contact) (condensation)
2 Protected against solid objects 2 Protected against water
Rated HP Rated Rated Catalog Rated HP of over 12 mm (e.g. finger) dripping up to 15° from the
1.40 FF RPM Volts Number 1.05 FF vertical
X-Ref / Index
1/4 1750 90 098002 0.40 3 Protected against solid 3 Protected against rain falling
1/4 1750 180 098003 0.50 objects of over 2.5 mm at up to 60° from the vertical
1/3 1750 90 098004 0.50 (e.g. tools, wire)
1/3 1750 90 108424 0.56
4 Protected against solid 4 Protected against water
1/3 1750 180 098005 0.50
objects of over 1 mm splashes from all directions
1/2 2500 90 098006 0.75
(e.g. thin wire)
1/2 2500 180 098007 0.70
1/2 1750 90 098000 0.70 5 Protected against dust 5 Protected against jets of
1/2 1750 90 108014 0.75
water from all directions
Tech Information
1/2 1750 90 108226 0.75 6 Totally protected against dust 6 Protected against jets of
1/2 1750 180 098008 0.56 water comparable to heavy
1/2 1750 180 108015 0.70 seas
1/2 1750 180 108227 0.70 7 Protected against the effects
3/4 2500 90 098009 1.00 of immersion to depths of
3/4 2500 90 108016 1.00 between 0.15 and 1m
3/4 2500 180 098010 1.00 8 Protected against the effects
3/4 2500 180 108017 0.86 of immersion of depths
Warnings/Cautions
3/4 1750 90 098032 1.00 greater than 1 m
3/4 1750 90 108018 1.00
9 Protection against the
3/4 1750 90 108228 1.25
effects of high pressure and
3/4 1750 180 098069 1.00
temperature water jet.
3/4 1750 180 108019 1.00
3/4 1750 180 108229 1.25
1 2500 90 108020 1.50 IEC DESIGN TYPES
1 2500 180 108021 1.50 The electrical performance characteristics of IEC Design N motors in
1 1750 90 108022 1.25 general mirror those of NEMA Design B—the most common type of
1 1750 90 108230 1.25 motor for industrial applications. By the same token, the characteristics
1 1750 180 108023 1.25 of IEC Design H are nearly identical to those of NEMA Design C. There
1 1750 180 108231 1.25 is no specific IEC equivalent to NEMA Design D.
1 1/2 2500 180 108265 2.00
1 1/2 1750 180 108092 1.75
1 1/2 1750 180 108262 1.75 MOTOR EFFICIENCY TEST METHODS
1 1/2 1750 180 108232 1.75 Performance data of single phase motors is determined by using
1 1/2 1750 180 128000 – I.E.E.E. Std. 114 (Method B), three phase motors by I.E.E.E. Std. 112
2 2500 180 108266 3.00 (Method B). Motor efficiency is calculated using CSA C390. These
2 1750 180 128001 – testing methods meet the requirements of EPAct of 1992 and most
2 1750 180 128010 – utility companies.
3 2500 180 128008 – For complete performance data on all LEESON motors, please review
3 1750 180 108502 – the Find-A-Product section on www.regalbeloit.com/Brands/LEESON.
Motors Designed For Use In The Automotive Industry Class 2 Group Classifications:
Automotive Duty 56 frame and U Frame motors (pages 233-240) are Group F - atmospheres containing carbonaceous dusts, including
designed to meet automotive industry specifications from General carbon black, charcoal, coal or coke dusts that have more
Motors® (GM-7EQ, GM-7EH), Ford® (EM1) and Chrysler® (NPEM-100). than 8% total entrapped volatiles, or dusts that have been
Actual qualifications for individual ratings are indicated in the footnotes sensitized by other materials so that they present an
on the price pages. explosion hazard.
AC / DC Controls
Automotive Duty T Frame motors are designed to meet or exceed Group G - atmospheres containing combustible dusts not included in
Ford EM1-1996 specification(see footnotes on the Group E or F, including flour, grain, wood, plastic, and
price pages). chemicals.
UL Recognized Component Listing BAKING INDUSTRY SANITATION STANDARDS COMMITTEE
Low voltage (< 600 V) motors in frames 48-449T and 182U-445U WASHGUARD® II, stainless steel washdown duty motors, NEMA
listed in this catalog (excludes REW, SREW, SEW, SSEW, MD and SE frames 56, 143T, 145T, 182T and 184T are certified to Standard
models) carry UL Recognized Component Listing (contact Regal for
Accessories / Kits
file number). No. 29 for Electric Motors and Accessory Equipment, authorization
number 769. The WBMQ Series of gear reducers are BISSC certified
Web: www.ul.com to Standard No. 29 for Electric Motors and Accessory Equipment,
authorization number 941.
NAFTA
A NAFTA (North American Free Trade Agreement) Certificate of Origin SAUDI ARABIAN STANDARDS ORGANIZATION
can be supplied on request. SCCP Ref. No.: R-100157
Canadian Standards Association (CSA) U.S. DEPARTMENT OF ENERGY (DOE)
Low voltage (< 600 V) motors in frames 48-449T
Mods / Factory
on request. Union has issued 24 directives related to the CE mark. Three Directives
apply to electric motors.
Motors for Hazardous Locations
NEMA® defines an explosion-proof motor as follows: “a totally- Low Voltage Directive (2006/95/EC) This directive applies to
enclosed machine designed and constructed to withstand an electrical equipment operating in the voltage range of 50-1000
explosion of a specified gas or vapor which may occur within it and to volts AC or 75-1500 volts DC. Virtually all LEESON® motors
prevent ignition of specified gas or vapor surrounding the machine by (except low voltage DC) are included in this directive.
sparks, flashes or explosions of the specified gas or vapor which may Based on our testing to the applicable electrical and mechanical
Tech Information
occur within the machine casing”. standards EN60034 and IEC 34, LEESON certifies conformity
to this directive. All three phase 50 Hz stock motors comply
Typical applications include petroleum and chemical plants or with the nameplate designations, lead markings and connection
pipelines, gasoline pumps and natural gas compressors. diagrams required. A “Declaration of Conformity” accompanies
these motors and a CE label is applied.
A dust-ignition-proof motor is “a totally enclosed machine whose
enclosure is designed and constructed in a manner which will exclude Machinery Directive (89/3392/EEC) This directive applies to
ignitable amounts of dust or amounts which might affect performance machinery that may contain certain motors. This is an issue
or rating, and which will not permit arcs, sparks, or heat otherwise with equipment manufacturers and requires the use of a motor
generated or liberated inside of the enclosure to cause ignition of
Warnings/Cautions
Gearmotors
B3 FOOT-MOUNTED
AC / DC Controls
Accessories / Kits
Mods / Factory
METRIC (IEC) FRAME DIMENSIONS (Millimeters)
Options
Mounting Shaft General B5 Flange B14 Face
Frame
A B C H AB K D E F G ED DH AC AD HD M N P S T LA M N P S T LA
D56 90 71 36 56 107 6 9 20 3 7.5 8 M3 x 8 – – – 100 80 120 7 2.5 7 65 50 80 M5 2.5 7
D63 100 80 40 63 122 7 11 23 4 8.5 10 M4 x 10 126 84 171 115 95 140 10 3.0 7 75 60 90 M5 2.5 7
D71 112 90 45 71 136 7 14 30 5 11.0 20 M5 x 12.5 141 94 191 130 110 160 10 3.5 7 85 70 105 M6 2.5 9
D80 125 100 50 80 154 10 19 40 6 15.5 25 M6 x 16 159 102 206 165 130 200 12 3.5 12 100 80 120 M6 3.0 9
X-Ref / Index
D90S 140 100 56 90 172 10 24 50 8 20.0 32 M8 x 19 180 112 229 165 130 200 12 3.5 12 115 95 140 M8 3.0 9
D90L 140 125 56 90 172 10 24 50 8 20.0 32 M8 x 19 180 112 229 165 130 200 12 3.5 12 115 95 140 M8 3.0 9
DF100L 160 140 63 100 205 12 28 60 8 24.0 40 M10 x 22 205 130 270 215 180 250 15 4.0 11 130 110 160 M8 3.5 14
DF112M 190 140 70 112 230 12 28 60 8 24.0 40 M10 x 22 240 150 300 215 180 250 15 4.0 12 130 110 160 M8 3.5 11
DF132S 216 140 89 132 270 12 38 80 10 33.0 56 M12 x 28 275 180 345 265 230 300 15 4.0 12 165 130 200 M10 3.5 14
DF132M 216 178 89 132 270 12 38 80 10 33.0 56 M12 x 28 275 180 345 265 230 300 15 4.0 12 165 130 200 M10 3.5 14
DF160M 254 210 108 160 320 15 42 110 12 37.0 80 M16 x 36 330 210 420 300 250 350 19 5.0 13 215 180 250 M12 4.0 13
Tech Information
DF160L 254 254 108 160 320 15 42 110 12 37.0 80 M16 x 36 330 210 420 300 250 350 19 5.0 13 215 180 250 M12 4.0 13
DF180M 279 241 121 180 355 15 48 110 14 42.5 80 M16 x 36 360 236 455 300 250 350 19 5.0 15 – – – – – –
DF180L 279 279 121 180 355 15 48 110 14 42.5 80 M16 x 36 360 236 455 300 250 350 19 5.0 15 – – – – – –
DF200L 318 305 133 200 395 19 55 110 16 49.0 100 M20 x 42 420 260 505 350 300 400 19 5.0 18 – – – – – –
DF225S 356 286 149 225 435 19 55*/60 110*/140 16*/18 49*/53 100*/125 M20 x 42 450 275 580 400 350 450 19 5.0 18 – – – – – –
DF225M 356 311 149 225 435 19 55*/60 110*/140 16*/18 49*/53 100*/125 M20 x 42 450 275 580 400 350 450 19 5.0 18 – – – – – –
DF250M 406 349 168 250 24 60*/65 140*/140 18*/18 53*/58 125*/125 M20 x 42 508 300 625 – – – – – – – – – – – –
Warnings/Cautions
* 2 Pole Dimensions
For overall length dimensions for our IEC motors, please refer to our IEC motor section of this catalog.
Frames DF100L through DF132M, conduit box is located in the center of the frame.
467
Technical Information
Dimensions - Definite Purpose - Close Coupled Pump Motors
Gearmotors
C
AH
AC / DC Controls
ER "BF" 4 HOLES
ET 213-365 JP & JM
EQ 45
45
ES
BB KEYWAY
AJ
Accessories / Kits
EN
AK
U BD
EM
EL
EP
S
R
BC
Mods / Factory
ET 143-184 JP & JM
Options
EN
BF Tap
Bolt Drill Bolt
X-Ref / Index
254 & 1.2495 5.25 7.250 8.500 0.312 10.00 4 1/2-13 0.75 1.750 1.3750 1/2-13 1.50 1.00 1.750 0.640 5.25 1.112 2.53 0.252 3.015
256JM 1.2490 8.497 0.250 1.748 1.3745 0.610 1.097 0.250 2.985
284 & 1.2495 5.281 11.00 12.500 0.312 14.00 4 5/8-11 0.94 1.750 1.3750 1/2-13 1.50 1.00 2.125 0.645 5.25 1.112 2.53 0.252 3.020
286JM 1.2490 5.219 12.495 0.250 1.748 1.3745 0.605 1.097 0.250 2.980
324 & 1.2495 5.281 11.00 12.500 0.312 14.00 4 5/8-11 0.94 1.750 1.3750 1/2-13 1.50 1.00 2.125 0.645 5.25 1.112 2.53 0.252 3.020
326JM 1.2490 5.219 12.495 0.250 1.478 1.3745 0.605 1.097 0.250 2.980
BF EN Keyseat
EN
BF Tap
Bolt Drill Bolt
Frame BD Tap Pen. Tap Depth Pen. EP ER ES
Desig. U AH AJ AK BB Max. No. Size Allow. EL EM Size Max. Allow. Min. EQ Min. R Min. S ET
143 & 0.8745 7.19 5.890 4.500 0.156 6.62 4 3/8-16 0.56 1.156 1.0000 3/8-16 1.12 0.75 1.156 1.578 7.312 0.771 1.65 0.190 5.952
145JP 0.8740 7.15 5.860 4.497 0.125 1.154 0.9995 1.548 0.756 1.65 0.188 5.922
182 & 0.8745 7.21 5.890 4.500 0.156 6.62 4 3/8-16 0.56 1.250 1.0000 3/8-16 1.12 0.75 1.250 1.578 7.312 0.771 1.65 0.190 5.952
184JP 0.8740 7.15 5.860 4.497 0.100 1.248 0.9995 1.548 0.756 0.188 5.922
213 & 1.2495 8.12 7.250 8.500 0.312 9.00 4 1/2-13 0.75 1.750 1.3750 1/2-13 1.50 1.00 1.750 2.390 8.125 1.112 2.53 0.252 5.890
215JP 1.2490 8.497 0.250 1.748 1.3745 2.360 1.097 0.250 5.860
254 & 1.2495 8.156 7.250 8.500 0.312 10.00 4 1/2-13 0.75 1.750 1.3750 1/2-13 1.50 1.00 1.750 2.390 8.125 1.112 2.53 0.252 5.890
256JP 1.2490 8.094 8.497 0.250 1.748 1.3745 2.360 1.097 0.250 5.855
284 & 1.2495 8.156 11.00 12.500 0.312 14.00 4 5/8-11 0.94 1.750 1.3750 1/2-13 1.50 1.00 2.125 2.390 8.125 1.112 2.53 0.252 5.895
286JP 1.2490 8.094 12.495 0.250 1.748 1.3745 2.360 1.097 0.250 5.860
324JP & 1.2495 8.12 11.00 12.500 0.312 14.00 4 5/8-11 0.94 1.750 1.3750 1/2-13 1.50 1.00 2.125 2.395 8.125 1.112 2.53 0.252 5.895
326JP 1.2490 12.495 0.250 1.748 1.3745 2.355 1.097 0.250 5.855
364JP & 1.6245 8.12 11.00 12.500 0.312 14.00 4 5/8-11 0.94 2.125 1.7500 1/2-13 1.50 1.00 2.500 2.395 8.125 1.416 2.53 0.377 5.895
365JP 1.6240 12.495 0.250 2.13 1.7495 2.355 1.401 0.375 5.855
All dimensions are measured in inches. For “C” dimensions, refer to the appropriate catalog page. Certified drawings are available upon request -
contact Regal for details.
468
Technical Information
Gearmotors
Dimensions - NEMA® Explosion Proof - 158 Series
AC / DC Controls
ES
AJ
Accessories / Kits
NEMA EXPLOSION-PROOF • 158 SERIES • RIGID MOUNT DIMENSIONS (Inches)
Mods / Factory
Options
Frame A B D E F G H J K L M N O P T U V N-W ES AA AB AC AF BA KEY
Size
182T 6 21/4 613/16 415/16 213/16
9 41/2 33/4 7
/16 7
/16 13/4 17/8 91/8 91/4 – 1.125 21/2 23/4 17/8 3
/4 713/16 69/16 31/8 23/4
184T 7 23/4 75/16 57/16 215/16
213T 7 23/4 81/8 63/16
101/2 51/4 41/4 7
/16 7
/16 2 17/8 37/16 101/2 101/2 25/16 1.375 31/8 31/4 27/16 1 91/4 75/8 31/2 31/2 /16
5
215T 81/2 31/2 87/8 615/16
254T 101/4 41/8 103/8 85/16
121/2 61/4 5 5
/8 9
/16 21/2 25/8 41/16 121/2 121/2 25/16 1.625 33/4 37/8 215/16 11/4 101/4 87/8 37/8 41/4
256T 12 5 111/4 93/16
X-Ref / Index
284T 4 /16
11
1.875 4 /8
3
4 /2
1
3 /4
1 1
/2
111/2 43/4 1113/16 97/16
284TS 35/16 1.625 3 31/8 115/16 3
/8
133/4 7 51/2 5
/8 9
/16 21/2 23/4 14 14 27/16 11/2 121/8 10 47/16 43/4
286T 411/16 1.875 43/8 41/2 31/4 1
/2
13 51/2 129/16 103/16
286TS 3 /16
5
1.625 3 31/8 115/16 3
/8
324T 55/16 2.125 5 51/8 4
131/4 51/4 133/16 107/16
324TS 313/16 1.875 31/2 35/8 2
151/2 8 61/4 5
/8 11
/16 23/4 31/8 16 16 25/8 2 143/8 113/4 53/8 51/4
326T 55/16 2.125 5 51/8 3
143/4 6 1315/16 113/16
326TS 3 /16
13
1.875 31/2 35/8 21/16
Tech Information
364T 6 2.375 55/8 53/4 41/2 5
/8
55/8 161/16 113/8
364TS 23/4 37/8 1.875 31/2 35/8 21/16 1
/2
17 15 9 7 7
/8 11
/16 37/8 181/2 19 127/8 3 161/16 135/16 67/8 57/8
365T 6 2.375 55/8 53/4 41/2 5
/8
61/8 159/16 117/8
365TS 33/4 3 /8
7
1.875 31/2 35/8 21/16 1
/2
405T 75/8 2.875 7 71/8 511/16 3
/4
19 16 10 8 67/8 11/8 13
/16 31/4 31/4 179/16 131/8 215/16 225/16 215/16 4 163/8 131/4 71/2 65/8
405TS 45/8 2.125 4 41/8 27/8 1
/2
Warnings/Cautions
NEMA EXPLOSION-PROOF • 158 SERIES • C FACE DIMENSIONS (Inches)
Frame AJ
A B D E F H L D P T U V AH BB AK BD BG AA AB AC AF KEYWAY
Size DIA. BARR.
182T 6 21/4 65/8 57/8
9 41/2 33/4 /16
7
91/8 91/4 – 1.1250 21/2 25/8 71/4 4 /32
9
8.500 83/4 3
/4 93/8 71/8 21/2 /4
1
184T 7 23/4 71/8 63/8
AB
AC / DC Controls
C T
AC
N
W
ES
ES AF
O
Accessories / Kits
U D
G
AA
K J
BS BS BA E E H
B A
Frame C
A B D E 2F* G H J K N O P T U N-W ES AA AB AC AF BA BS KEY
Size Dim
182T
8.88 7.75 — 3.75 6.75 0.45 0.41-0.46 1.56 — 2.78 9.36 9.76 2.62 1.125 2.75 1.75 0.75 9.73 7.13 — 2.75 3.37 0.25 17.12
184T
213T 5.19
10.38 8.50 4.25 7.00 0.60 0.44 1.87 — 3.41 10.60 11.50 2.62 1.375 3.38 2.38 0.75 10.94 8.32 2.55 3.50 3.50 0.31 20.18
215T 5.25
254T 6.19 8.25 4.12 23.52
12.12 10.25 5.00 0.55 0.53-0.58 2.08 — 4.19 14.07 14.12 — 1.625 4.00 2.88 1.25 13.67 10.65 3.12 4.25 0.38
256T 6.25 10.00 5.00 25.27
X-Ref / Index
Gearmotors
Dimensions - Speedmaster® Inverter Duty Motors
AC / DC Controls
Accessories / Kits
TENV • C FACE • RIGID BASE • DIMENSIONS (Inches)
Frame O P AB AG
D E 2F H U AA AH AJ AK BA BB BF BS KEY
Size MAX. MAX MAX MAX
143TC 3.50 2.75 4.00 .38 7.45 7.98 .875 1.09 7.04 9.25 2.12 5.875 4.50 2.62 .13 3/8-16 2.81 .19 x .19 x 1.38
Mods / Factory
145TC 3.50 2.75 5.00 .35 7.45 7.98 .875 1.09 7.04 10.25 2.12 5.875 4.50 2.62 .13 3/8-16 3.81 .19 x .19 x 1.38
Options
182TC 4.50 3.75 4.50 .41 9.36 9.76 1.125 1.09 8.08 11.75 2.62 7.250 8.50 3.50 .27 1/2-13 2.25 .25 x .25 x 1.75
184TC 4.50 3.75 5.50 .41 9.36 9.76 1.125 1.09 8.08 12.75 2.62 7.250 8.50 3.50 .27 1/2-13 2.75 .25 x .25 x 1.75
213TC 5.25 4.25 5.50 .44 10.97 11.50 1.375 1.09 9.31 15.12 3.12 7.250 8.50 4.25 .27 1/2-13 3.50 .31 x .31 x 2.38
215TC 5.25 4.25 7.00 .44 10.97 11.50 1.375 1.09 9.31 17.31 3.12 7.250 8.50 4.25 .27 1/2-13 6.18 .31 x .31 x 2.38
254TC 6.25 5.00 8.25 .53 14.09 14.27 1.625 1.25 9.83 19.06 3.75 7.250 8.50 4.75 .27 1/2-13 6.31 .38 x .38 x 2.88
256TC 6.25 5.00 10.00 .56 14.09 14.27 1.625 1.25 11.08 18.82 3.75 7.250 8.50 4.75 .27 1/2-13 5.00 .38 x .38 x 2.88
X-Ref / Index
284TC 7.00 5.50 9.50 .56 14.16 14.32 1.875 1.50 12.31 20.57 4.38 9.000 10.50 4.75 .27 1/2-13 5.50 .50 x .50 x 3.25
Tech Information
Warnings/Cautions
471
Technical Information
Dimensions - NEMA® Steel Frame Motors
Gearmotors
RIGID MOUNT
C
The condensed dimensions shown
on these pages are for general
AC / DC Controls
purposes.
C FACE
NEMA SHAFT AND
KEYWAY DIMENSIONS (Inches)
NEMA KEYWAY NEMA KEYWAY
SHAFT DIMENSIONS SHAFT DIMENSIONS
(U) (R) (S) (U) (R) (S)
Mods / Factory
/8
3 21
/64 FLAT 1-7/8 1-19/32 1
/2
Options
/2
1 29
/64 FLAT 2-1/8 1-27/32 1
/2
5
/8 33
/64 3
/16 2-3/8 2-1/64 5
/8
7
/8 49
/64 3
/16 2-1/2 2-3/16 5
/8
1-1/8 63
/64 1
/4 2-7/8 2-29/64 3
/4
1-3/8 1-13/64 5
/16 3-3/8 2-7/8 /
78
1-5/8 1- /32
13 3
/8 3-7/8 3-5/16 1
S is keyway width.
U minus R is keyway depth.
X-Ref / Index
48 3 21/8 13/8 11
/32 Slot 19/16 513/16 519/32 1
/2 11/2 /2
1
47/8 111/16 33/4 3 21/2 /8
1
5 21/4 57/8 /4-20
1
/64 Flat
3
145T 21/2
182T 2 /4
1
— 10 /8 5
9 /32
21
8 /8
5
1013/16
215T 31/2
* 143-5TC NEMA C face BA dimension is 2¾”. 182-4TC NEMA C face BA dimension is 3½”. 213-5TC NEMA C face BA dimension is 4¼”.
**326TC and smaller have 4 mounting holes in NEMA C face, 364TC and larger have 8 mounting holes.
Blue shading denotes dimensions established by NEMA standard MG1, others are unique to LEESON, and will vary with each manufacturer.
Gearmotors
Dimensions - NEMA® Steel Frame Motors
MOTOR LEADS
AC / DC Controls
6.00" LONG MIN. "AH" "AG" 3.60 REF
3.75 REF 2.94 REF
1/2 NPT
CONDUIT
PLUG
.06
REF
1.94
FULL FLAT SEAL PLUG
3.38
FLAT
"P"
"AJ"
"D"
"U"
Accessories / Kits
"AK" IMMERSION PROOF "E" "E"
1/4-20 UNC-2B
RIGHT HAND BREATHER
"R" THREAD "BA" "B" "H" TYP. (4)
(4) PLACES "BD"
Mods / Factory
M1120181 31S 7.07 3.13 3.80 .50000 1.5 1.44 2.63 1
/4-20 3.16 1.99 .07 1.57 .235 1.000 6.55 /4-20
1
Options
M1120182 31S 6.57 3.13 4.45 .50000 1.5 1.44 2.63 1
/4-20 3.16 1.99 .07 1.57 .235 1.000 6.05 /4-20
1
"BD" REF
X-Ref / Index
MOTOR LEADS 3.75 REF
2.94 REF
6.0 LONG MIN
1/2 NPT
"BB" CONDUIT
PLUG
1.83 REF
TOP
2.67
1.50
FLAT
FLAT
"AK"
"P"
"R"
"U"
Tech Information
"TAP" THRU SCRIBE LINE
45° FAR SIDE
(4) HOLES
EQUALLY SPACED
ON "AJ" BC IMMERSION PROOF
SHAFT SEAL BREATHER
Warnings/Cautions
M1120185 32F42CZ 8.36 3.25 .500 1.69 1.50 13 SQ 3.750 1
/4-20 3.00 4.19 3.80
DIMENSIONS (Inches)
P
B
X-Ref / Index
31
ES** 6.89 3.07 3.45 .5000 1.5 1.00 2.63 1
/4-20 3.16 1.99 .07 1.57 .235 1.000 6.42 /4-20
1
**Catalog numbers M1120041 & M1120044 have an ‘AG’ & ‘F’ dimension that is .5” longer than stated in table.
Warnings/Cautions
474
Technical Information
Gearmotors
5000 Frame Motors
C AB
N-W P
AC / DC Controls
O
ØU
D +.00
-.06
Accessories / Kits
2XF BA 2E
'H' DIA. AA
8 HOLES 2F LEAD HOLE
2XXF
Mods / Factory
AB P O
FRAME H BA 2XF 2F 2XXF N-W U D 2E AA
(MAX.) (MAX.) (MAX.)
Options
1.062 2.875 12.470
5010LS 8.50 32.00 — — 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.874 12.410
1.062 2.875 12.470
5011LS 8.50 — 36.00 — 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.874 12.410
1.062 2.875 12.470
5012LS 8.50 — — 40.00 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.874 12.410
X-Ref / Index
1.062 2.875 12.470
5013LS 8.50 45.00 — — 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.874 12.410
1.062 3.875 12.470
5010LX 8.50 32.00 — — 12.00 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.874 12.410
1.062 3.875 12.470
5011LX 8.50 — 36.00 — 12.00 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.874 12.410
Tech Information
1.062 3.875 12.470
5012LX 8.50 — — 40.00 12.00 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.874 12.410
1.062 3.875 12.470
5013LX 8.50 45.00 — — 12.00 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.874 12.410
1.062 4.000 12.470
5010L 8.50 32.00 — — 9.50 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.999 12.410
1.062 4.000 12.470
Warnings/Cautions
5011L 8.50 — 36.00 — 9.50 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.999 12.410
1.062 4.000 12.470
5012L 8.50 — — 40.00 9.50 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.999 12.410
1.062 4.000 12.470
5013L 8.50 45.00 — — 9.50 26.05 28.88 27.08 20.00 4.00 NPT
1.077 3.999 12.410
1.062 2.625 12.470
5010S 8.50 32.00 — — 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.624 12.410
1.062 2.625 12.470
5011S 8.50 — 36.00 — 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.624 12.410
1.062 2.625 12.470
5012S 8.50 — — 40.00 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.624 12.410
1.062 2.625 12.470
5013S 8.50 45.00 — — 5.75 26.05 28.88 27.08 20.00 4.00 NPT
1.077 2.624 12.410
All dimensions are measured in inches. For “C” dimensions, refer to the appropriate catalog page.
Certified drawings are available upon request - contact Regal® for details.
475
Gearmotors Warnings and Cautions
Electrical
SAFETY
Safety is emphasized throughout this catalog. These are safety alert symbols and signal words. They alert
the user to potential personal injury hazards. Obey all safety messages to avoid possible injury or death or
AC / DC Controls
CAUTION indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury.
Accessories / Kits
This catalog is not intended to provide operational instructions. Appropriate instructions provided with the motor and precautions
attached to the motor should be read carefully prior to installation, operation and/or maintenance of the equipment. Injury to
personnel or motor failure may be caused by improper installation, maintenance or operation.
The following WARNING and CAUTION information is supplied to you for your protection and to provide you with many years of
trouble free and safe operation of your Regal® product:
Mods / Factory
Options
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Failure to
follow the steps listed below could result in damage to equipment or personal injury.
X-Ref / Index
• Disconnect power and lock out driven equipment before working on a motor.
• Keep hands and clothing away from moving parts.
• The lifting support on the motor is not to be used to lift the entire machine. Only the motor attached directly to the support may
be safely lifted by the support.
• Install and ground per local and national codes.
Tech Information
Gearmotors
IMPORTANT INFORMATION CONTINUED PLEASE READ CAREFULLY
AC / DC Controls
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Failure to
follow the steps listed below could result in damage to equipment or personal injury.
• Consult qualified personnel with questions and all electrical repairs must be performed by trained and qualified personnel only.
Accessories / Kits
• For motors nameplated as “belted duty only”, do not operate the motor without belts properly installed.
• Motors and/or driven equipment should not be operated faster than their rated speed.
• For inverter applications, follow the inverter manufacturer’s installation guidelines.
• Make sure the motor is properly secured and aligned before operation.
In the event of the resale of any of the goods, in whatever form, Resellers/Buyers shall include the following language in a
conspicuous place and in a conspicuous manner in a written agreement covering such sale:
Mods / Factory
THE MANUFACTURER MAKES NO WARRANTY OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW
Options
OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS SOLD
HEREUNDER. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS PURCHASED HEREUNDER
WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. In no event will the manufacturer be liable for
consequential, incidental or other damages. Even if the repair or replacement remedy shall be deemed to have failed of its
essential purpose under Section 2-719 of the Uniform Commercial Code, the manufacturer shall have no liability to Buyer for
consequential damages.
Resellers/Buyers agree to also include this entire document including the warnings and cautions above in a conspicuous place and in
X-Ref / Index
a conspicuous manner in writing to instruct users on the safe usage of the product.
This information should be read together with all other printed information supplied by Regal.
For more information contact: Regal Beloit America, Inc., 1051 Cheyenne Avenue, Grafton, Wisconsin 53024
Phone: 262-377-8810 or Fax: 262-377-3440
Tech Information
Warnings/Cautions
477
Gearmotors Warnings and Cautions
Mechanical
The following WARNING and CAUTION information is supplied to you for your protection and to provide you with many years of
trouble free and safe operation of your Regal® product:
AC / DC Controls
Read ALL instructions prior to operating reducer. Injury to personnel or reducer failure may be caused by improper installation,
maintenance or operation.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Failure to
Accessories / Kits
follow the steps listed below could result in damage to equipment or personal injury.
• Written authorization from Regal is required to operate or use reducers in man lift or people moving devices.
• Check to make certain application does not exceed the allowable load capacities published in the current catalog.
• Buyer shall be solely responsible for determining the adequacy of the product for any and all uses to which buyer shall apply the
product. The application by buyer shall not be subject to any implied warranty of fitness for a particular purpose.
• For safety, buyer or user should provide protective guards over all shaft extensions and any moving apparatus mounted thereon.
Mods / Factory
The User is responsible for checking all applicable safety codes in his area and providing suitable guards. Failure to do so may
Options
• Any brakes that are used in conjunction with a reducer must be sized or positioned in such a way so as to not subject thereducer
to loads beyond the catalog rating.
• Lifting supports including eyebolts are to be used for vertically lifting the gearbox only and no other associated attachments or
motors.
• Use of an oil with an EP additive on units with backstops may prevent proper operation of the backstop. Injury to personnel,
damage to the reducer or other equipment may result.
Tech Information
• Overhung loads subject shaft bearings and shafts to stress which may cause premature bearing failure and/or shaft breakage
from bending fatigue, if not sized properly.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Failure to
Warnings/Cautions
follow the steps listed below could result in damage to equipment or personal injury.
• Test run unit to verify operation. If the unit tested is a prototype, that unit must be of current production.
• If the speed reducer cannot be located in a clear and dry area with access to adequate cooling air supply, then precautions must
be taken to avoid the ingestion of contaminants such as water and the reduction in cooling ability due to exterior contaminants.
• Mounting bolts should be routinely checked to ensure that the unit is firmly anchored for proper operation.
In the event of the resale of any of the goods, in whatever form, resellers/buyers will include the following language in a
conspicuous place and in a conspicuous manner in a written agreement covering such sale:
THE MANUFACTURER MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF
LAW OR OTHERWISE, AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS SOLD
HEREUNDER. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS PURCHASED HEREUNDER
WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. IN NO EVENT WILL THE MANUFACTURER BE
LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR OTHER DAMAGES. Even if the repair or replacement remedy shall be
deemed to have failed of its essential purpose under Section 2-719 of the Uniform Commercial Code, the manufacturer shall
have no liability to Buyer for consequential damages.
Resellers/buyers agree to also include this entire document including the warnings and cautions above in a conspicuous place and in
a conspicuous manner in writing to instruct users on the safe usage of the product. This information should be read together with all
other printed information supplied by Regal.
478
Mods / Factory
479
Other
Gearmotors
Products AC / DC Controls Accessories / Kits Options X-Ref / Index Tech Information Warnings/Cautions
Notes
Mods / Factory
480
Warnings/Cautions Tech Information X-Ref / Index Options Accessories / Kits AC / DC Controls Other
Gearmotors
Products
Notes
P C P
C
(56-184) AH AB AB
N-W
(213-449) AH 45°
45°
BB
O O
AK BD
U +.00 U +.00
D -.06 D -.06
AA AA
LEAD HOLE LEAD HOLE
AJ BS BA
BS BA
'H' DIA E E 2F 'H' DIA. E E
2F 4 HOLES 4 HOLES
B A (B) A
BF
4 HOLES
Contact your sales representative for Refer to your LEESON® catalog for “C” dimensions.
“AB”, “O” & “P” dimensions.
7 48YZ motors have std. 48-frame base with 1/2” dia. X 1 7/8 long 41 Uses drip cover kit 175846.00
shaft ext. with flat. Also includes sleeve to convert shaft to 5/8” dia. 42 Uses drip cover kit 175849.00
With 3/16” square key
43 Uses drip cover kit 175962.00
8 NEMA 145TC shaft, 7/8” X 2 1/4” and NEMA 56 removable base
44 Uses drip cover kit 175963.00
9 S56CZ motors have mounting bases with NEMA 56 mounting holes,
NEMA 56/143-5T C-face and a NEMA 143-5T shaft extension 45 Uses drip cover kit 175614.00
(7/8”Dia. x 2 1/4” long) 46 50 Hz operation at rated HP
10 Motor has mounting base with 182T mounting holes, shaft height is 47 Rated at 50Hz at full rated HP
4.5”. Shaft is std. NEMA 56-5/8” Dia. X 1 7/8” long
48 190/380V, 50Hz at next lowest HP @1.15 S.F.
11 TEBC totally enclosed blower cooled
49 Class F insulated
12 TENV totally enclosed non-vented
50 Suitable for single speed operation only
13 TEFC totally enclosed fan cooled
51 Mechanical centrifugal starting switch with overspeed protection,
14 F1 mounting only others have electronic start switch
15 Built-in conduit box located at 12:00 52 Extra high starting torque
16 1/2” diameter shaft - 2 1/4” long 53 Capacitor start/capcitor run design for reduced amperage, others are
17 5/8” diameter shaft - 2 5/8” long capacitor start/induction run
18 Shaft extension has keyway and flat 180º apart for ease of mounting 54 Split phase start, capacitor run is suitable for belt drive with- in the
airflow of the fan
19 Shaft is 5/8” Dia. by 2.0” long
55 Split phase start, capacitor run
20 Shaft is 5/8” Dia. by 2 5/8” long
56 Designed for inverter duty operation
21 Shaft is 3/4” Dia. by 3 1/2” long
57 Rated for farm duty service
22 Standard 5/8” diameter shaft with keyway plus 3/4” deep hole
drilled and tapped to 1/4-20 UNC in end of shaft to facilitate mount- 58 Provision for belly band mount, no base
ing of some fan blades 59 Resilient base with provision for belly band mount
23 Standard 7/8” diameter shaft with keyway plus 3/4” deep hole 60 Rigid base
drilled and tapped to 1/4-20 UNC in end of shaft to facilitate mount-
ing of some fan blades 61 Nema 145TC face mounting with removable NEMA 182T rigid base
24 Motor’s shaft is 1 inch longer than standard 62 Provision for belly band and pedestal fan mounting, no rigid base
25 Shaft extension has keyway and flat 180º apart for ease of mounting. 63 Resilient base
Useable shaft is 1 1/2” long by 1/2 Dia., 1/8” keyway 64 Stub shaft on ODE for manual jogging
www.regalbeloit.com
APPLICATION CONSIDERATIONS
The proper selection and application of products and components, including the related area of product safety, is the responsibility
of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon
the use and application of such products and components. The scope of the technical and application information included in this
publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and
other factors can materially affect the application and operating results of the products and components and the customer should
carefully review its requirements. Any technical advice or review furnished by Regal Beloit America, Inc. and/or its affiliates (“Regal”)
with respect to the use of products and components is given in good faith and without charge, and Regal assumes no obligation or
liability for the advice given, or results obtained, all such advice and review being given and accepted at customer’s risk.
For a copy of our Standard Terms and Conditions of Sale, please visit https://www.regalbeloit.com/Terms-and-Conditions-of-Sale.
These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use a Regal
product referred to herein, including any person who buys from a licensed distributor of these branded products.
Regal, LEESON, Lincoln Motors, Marathon Motors, Bravo, CTAC, ECO AG, Eco Saver, Extreme Duck, Globetrotter, IRIS, Leeson FHP
Electric Motors, Multiguard, Platinum e, Q-Car, Speedmaster, Ultimate e, Washguard and Wattsaver are trademarks of Regal Beloit
Corporation or one of its affiliated companies.
©2000, 2019 Regal Beloit Corporation, All Rights Reserved. MCC18017E L1050E • Printed in USA