Professional Documents
Culture Documents
UN 5000 User's Manual: Drawings
UN 5000 User's Manual: Drawings
UN 5000 User's Manual: Drawings
Chapter 10
Drawings
10.1 General:
In this Chapter you find the following two Drawings
• Hardware Drawing
• Software Drawing
The Hardware Drawing describes all the relevant components and their connections.
The Software Drawings explains the functions of the software. Both documents are
absolutely necessary for maintenance and trouble shooting. How to read in the
drawings and how to interpret them is explained in the following description. The
drawings themselves are added as an appendix in this chapter.
Taking an example on the schematic, the location designation and references are
explained:
f Systemkabel
f o------------o Connections:
Every single wire connection is shown in the schematic.
Every line corresponds to a wire connection.
-W57 System cables are designated as a single wire connection.
o------/------o (from plug to plug)
2 (2) corresponds to the number of wires / cable.
Sheet title c
F
Cover sheet
1/43
9
-
AM Document
3BHS 113062 E23
number
7 8
e g
h