Professional Documents
Culture Documents
LG LCD TV Troubleshooting - No Back-Light - No Power - No Startup - Service Tips
LG LCD TV Troubleshooting - No Back-Light - No Power - No Startup - Service Tips
- Service tips
LG LCD TV – Repair Tips – Faults and Checks
LG 32LC45 LCD TV
Symptom: "No Signal" displayed. No sound and no picture. Backlight and
OSD menu is ok. LED is green color light.
> Try to update firmware if not then replace main signal board.
LG 47LF66 LCD TV
Symptom: No power
> Change the C202, C206 and C217 (all 2200uf/10v) on IP board (Inverter Power Supply Board).
LG 37LF66 LCD TV
Symptom: No power
IC U500 (ICE3B1565J) is short circuit and fusible resistor FB501 (2.2R) open circuit.
> Check safety resistor for open circuit. Replace D501 (UF4007), 3.6v Zener diode ZD502 (1N5227)
and C508 (33uF/50v).
LG 32LC56ZC LCD TV
Symptom: No start-up. Standby LED flashes from red to green
> Check or replace C202, C206, C217, C218 (all 2200uF/10v) and C226 (470uF/25v).
LG 32LC56 LCD TV
Symptom: Picture divided into several parts. Distorted picture
> Replace T-CON (Part Number: 218394).
LG 32LC56ZC LCD TV
Symptom: Stuck in standby mode.
> Check & change C204. If the pcb board discolored around R208 resistor then replace PSU.
LG Chassis LA73A LCD TV
32LB4DS-UA, 32LB9D-UA, 32LB4DS-UA, 37LB5DF-UC, 42LB5DF-UC, 47LB5DF, 47LC7DF-UB,
47LY3DF-UA, 52LB5DF-UC
Symptom: a) Auto Power on and Power Off
b) Auto Channel Up and Down
c) Auto OSD Menu display
> Check or replace EMI filter on these location: L729, L730, L741, L742, L743, L744, L746, L747,
L751, L752, and L753.
LG 32LC56 LCD TV
Symptom: Picture divided into several parts. Display distortion.
> Replace T-CON board (Part Number: 218394).
LG 32LC56ZC LCD TV
Symptom: No start-up. Standby LED flashes from red to green.
> Replace the C202, C206, C217 and C218 (2200uf/10v all), and C226 (470uf/25v).
LG 37LE2R: No start-up
LG 37LE2R Chassis LP61A LCD TV
No start-up.
> Replace SMD regulator TL431 (U130) in PSU.
LG 27LC2R: No Backlight
LG 27LC2R Chassis LP61A LCD TV
No backlight
> Check the SMD fuse F1 on inverter board for open circuit.
LG: No start-up. Standby LED flashes from red to green
Model/s: LG 32LC56ZC LCD TV
Symptom: No start-up. Standby LED flashes from red to green
> Check or replace C202, C206, C217, C218 (all 2200uF/10v) and C226 (470uF/25v).
LG: No Power
LG 47LF66 LCD TV
Symptom: No power
> Change C202, C206 and C217 (all 2200uf/10v) on IP board (Power Supply Inverter Board).
LG: No Power
LG 37LF66 LCD TV
Symptom: No power
U500 (ICE3B1565J) short circuit and fusible resistor FB501 (2.2R) open circuit.
> Check safety resistor for open circuit. Replace D501 (UF4007), 3.6v zener diode ZD502 (1N5227)
and C508 (33uF/50v).
LG 32LG30R-TA LCD TV
Symptom: Stuck in standby mode
> When the AC power on, Red LED light lit. Using remote control to power on the TV, LED light
change to Blue color but PSU no 12V, 16.5V & 24V output. PFC big filter capacitor has 380V there.
Remove the ZD111, ZD112 & C108 on the PSU board near U102 (NCP1396A). It is a power supply
design bugs, so after remove these components, problem solved.