Professional Documents
Culture Documents
Pneumatic Oscillating Tool - POT - en
Pneumatic Oscillating Tool - POT - en
Pneumatic Oscillating Tool - POT - en
The powerful Pneumatic Oscillating Tool is designed for cutting dense, challenging materials.
As the name implies, the Pneumatic Oscilla- It is equally effective in specialty applications On G3 machines, the POT with 1.5 mm blades
ting Tool is an air-driven tool. It is particularly such as multi-layered fabric cutting or proces- is capable of cutting materials up to 50 mm /
well suited for cutting tough, dense, often mul- sing rubber and foam materials. 2 in thick.
ti-layered materials but can also handle soft, The many uses of this tool are enhanced even
thicker ones. The use of air pressure combined further by the wide range of available oscilla- For processing thinner, more delicate materi-
with an 8mm stroke makes the POT an excep- ting blades. Depending on the application, the als, Zünd recommends using the EOT (Electric
tionally powerful tool. POT can accommodate 0.6 mm or 1.5 mm Oscillating Tool).
Perfect applications for the POT incluide lea- thick knives.
ther hides, pelts, felt, or corrugated cardboard.
ZST-07-2015-m&k
The POT is available for 0.6mm and/or 1.5mm thick oscillating blades Wide range of applications and uses
Requires compressed air @ 300 - 400 l/min Powerful air-driven tool delivers high performance
Compatible with G3, S3, L3, D3. Fully supported in Zünd Cut Center software
Headquarters
Zünd Systemtechnik AG
Industriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 757 81 00 ∙ F +41 71 757 81 11 ∙ info@zund.com ∙ www.zund.com