Professional Documents
Culture Documents
03 - Muse Ed - Sr-02-0-Ann - 09
03 - Muse Ed - Sr-02-0-Ann - 09
Annunciator
MUSE ED Elevator Ctrl. No. MUSE ED-SR-02-0
Annunciator
Revision History
Rev. Prepared Checked Approved
Date Revision Contents
No. by by by
Mar. Harold
0 Release YS Kim DH Kim
2009 Lee
Part. Annunciator
MUSE ED Elevator Ctrl. No. MUSE ED-SR-02-0
Index
1. Annunciator ___________________________________________________________ 4
1.1. Description of ANN screen _________________________________________________ 4
3. Annunciator Mode______________________________________________________ 9
3.1. LCD Initialize ___________________________________________________________ 9
1. Annunciator
Function that only reading data is possible at DOC PCB. But for the writing and reading can
be done at DES PCB.
1.1. Description of ANN screen
a. Initial screen of annunciator
Initial screen: When the main power turn on, LCD display will show as below.
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16
R1 A C D = 0 4 0 8 F L 0 0 %
R2 E 0 0 0 - 0 0 1 0 0 0 0 0 S
R3 1 1 0 0 1 1 0 0 0 0 1 1 1 0 1
R4 K :
b. Row 1: Operation mode, present floor, load weight and speed of elevator.
a) ACD=27(Column1~ 6): Operation Code( ex: 27*Auto operation, 4*Maintenance
Operation, ...) ※ Refer to the MODE Description
b) 01FL (Column 8 ~11): Present floor
c) 00% (Column 13 ~ 16): On stop, present load weight (%) of the elevator.
c. Row 2: When an error occurs, it shows the trouble code of the top-level error, condition of
the operation, output of main signal and direction of elevator.
a) E000 (Column 2 ~ 4): Trouble code of high level error. (TCD No. 1 ~ 255)
031 DC Link Over-voltage 116 POSI(PRS) ON error(LDU)
052 INV reverse running detection 172 SD1U input error
084 R5SY relay ON error 200 CNET LON Comm. Error
d. Row 3: Displays input condition of main signal such as switches, relays and contactor, etc.
e. ACD MODE
3. Annunciator Mode
b. Observances
a) Enter 'FFFF' to clear the floor height measuring operation mode.
b) LCD Screen State is as follows;
A C D = 2 7 [ 1 6 ] 5 0 %
E 0 0 0 - 0 0 1 0 0 0 0 S
1 1 0 0 1 1 0 0 0 0 1 1 1 0 1
K :
c) ACD=27 will display in automatic mode.
d) If FHM has failed, the screen will be;
Part. Annunciator
MUSE ED Elevator Ctrl. No. MUSE ED-SR-02-0
A C D = 0 9 [ ] 0 0 M
E 0 0 0 - 0 0 1 0 0 0 0 S
1 1 0 0 1 1 0 0 0 0 1 1 1 0 1
F H M F A I L K :
e) FHM Fail, which means floor height measuring has failure, will display.
f) The car will return to the bottom floor automatically.
A C D = 0 3 [ F ] 5 0 %
E 0 0 0 - 0 0 1 0 0 0 0 S
Item No. 0 0 : 5 0 0 0 = 0 8 2 4 1 6 2 2
T R C 5 3 0- 1 K :
Address
b) To read the higher Item No., input '0'. For the lower, input '8'
ex) If you input '0' two times on A23E initial screen, indicates as below. (Address will be
increase 4 per one)
c) LCD Screen
A C D = 0 3 [ F ] 5 0 %
E 0 0 0 - 0 0 1 0 0 0 0 S
0 2 : 5 0 0 8 = 0 0 0 0 0 0 9 1
T R C 3 - 1 K :
d) The displayed data and address are Hexadecimal value.
e) To read the higher block No., input '0'. For the lower, input '8'
ex) If you input '1' one time on A23E initial screen, indicates as below. (Address will be