Professional Documents
Culture Documents
Lab#08 (2018 El 008) PDF
Lab#08 (2018 El 008) PDF
Lab#08 (2018 El 008) PDF
Task 2:
Write down the steps to perform the diagnostic test on DSKC6416.
ANSWER:
Steps:
Plug in the Power cod to turn on the DSP kit
Plug in the USB cable to the PC/laptop and the USB port is given in DSP kit
Make sure that you have DSK Diagnostic tool in your PC/LAPTOP. If so, execute the DSK
Diagnostic tool
Press the start button located at the right of dialogue box of DSK Diagnostic tool
The overall Diagnostic test will begin and one by one it will test the equipment on board. The green
flash indicates that the equipment is working properly.
The Diagnostic results will confirm whether the board is working properly or not.