Professional Documents
Culture Documents
Volumetric Flow Rate: Objectives
Volumetric Flow Rate: Objectives
Volumetric Flow Rate: Objectives
olumetric flow rate as well as to find the mass flow rate, which is equal to the product between Q
first diagram
Time (t) (sec)
Volume(v)(m^3) No. X- axis timeY- axis volume
60 4*10^-3 1 60 0.004
60 5.5*10^-3 2 120 0.0055
60 6.9*10^-3 3 180 0.0069
60 8*10^-3 4 240 0.008
0.009
volumetric flow rate 0.008
0.007
0.006
0.005
ate 0.004
0.003
0.002
0.006
0.005
ate 0.004
0.003
0.002
0.001
0
200 150 100 50
0.14
volumetric flow rate 0.12
calculate the volumetric flow rate.
Theslop=dy/dx
=∆volume (m^3) / ∆ time(second)
0.1 =3.75*10^-7 m^3/s
0.08
0.04
0.02
0
0 200 150 100 50
ch
rneh
(60sec)
*6.6=
Introduction:
Volumetric hydraulic bench supplies a controlled flow of water to
variety of laboratory experiment modules (available separately). T
of the bench forms a reservoir or ‘Sump Tank’ with a submersible
Once filled, the bench needs no external water supply.
The top of the bench provides a working surface. This will hold on
choice of experiment modules from TecQuipment’s Fluid Mechan
range. Larger experiments usually stand next to the bench. A rim
the top contains any spilled or excess water. A small recess or ‘Tro
the top works with a removeable Drain Valve to trap a small volum
water. It also catches discharged water from some experiments in
fluid mechanics range.
A hand-operated control valve adjusts the water flow rate from th
pump. An electrical box on the side of the bench includes the pum
switch, circuit protection and a digital display of flow.
Four wheels allow the user to move the bench around the classro
Two wheels have foot-operated locks to hold the bench in positio
A sight gauge to the lower side of the bench allows the user to ch
water level inside the tank.
An electronic flowmeter measures the outlet flow from the subm
pump. The signals from the flowmeter pass to the digital display t
the flow rate. The viewing angle of the display allows the user to s
clearly from a normal standing position
:Calculations
: First :Calculate the value of Q (m^3/sec)( Volumet
-1
Q=V(m^3)/t(sec)
=(4*10^-3 m^3)/(60sec)
)m^3/sec( 5-^10*6.6=
-2
Q=V(m^3)/t(sec)
)60sec(/)m^3 3-^10*5.5(=
)m^3/sec(5-^10*9.1=
-3
Q=V(m^3)/t(sec)