Professional Documents
Culture Documents
TCM1.0E TCM2.0E: May, 2008
TCM1.0E TCM2.0E: May, 2008
0E >>
SERVICE TRAINING
TCM1.0E
TCM2.0E
page: 1
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 2
<< TCM1.0E & TCM2.0E >>
Course Objective
SERVICE TRAINING
After this training you:
page: 3
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 4
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Range Overview
TCM1.0E 20PFL3403/10
26PFL3403/10
TCM2.0E 19PFL5403D/10
20PFL3403D/10
22PFL5403D/10
26PFL3403D/10
26PFL5403D/12
The xxPFL3403/10models
ThexxPFL3403/10 modelsare
areEurope
EuropeLCD
LCDplatform
platformdesigned
designedfor
fordriving
drivingbelow
below
panels:
panels:
• •20”
20”LPL
LPL(RGB
(RGBTTL)
TTL)
• •26”
26”AUO
AUO(LVDS)
(LVDS)
The
Themain
mainchip
chipisisfrom
fromMediatec
Mediatec(MTK8200
(MTK8200series)
series)and
andsupports
supportsbelow
belowinputs:
inputs:
• •one
oneanalog
analogRF RF(PAL
(PALB/G
B/GD/K
D/KI,I,SECAM
SECAMB/G
B/GD/KD/KL/L’)
L/L’)
• •one
oneSCART
SCART(CVBS
(CVBS&&RGB)
RGB)
• •one
oneCMP
CMP(YPrPb
(YPrPbcan
cansupport
supportfrom
from480i
480iup
uptoto1080i)
1080i)
• •one
oneVGA
VGA
• •one
oneHDMI
HDMI(can
(cansupport
support480i/p,
480i/p,576i/p,
576i/p,720p
720pup
uptoto1080i/p)
PERSONAL NOTES:
1080i/p)
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
• •one
oneS-Video
S-Videoinput
input
• •one
oneHeadphone
Headphoneoutput
output
page: 5
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 20PFL3403
page: 6
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 20PFL3403
page: 7
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 26PFL3403
page: 8
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 26PFL3403
page: 9
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 19PFL5403D
page: 10
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 20PFL3403D
page: 11
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 22PFL5403D
page: 12
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 26PFL3403D
page: 13
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Specifications 26PFL5403D
page: 14
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Delta’s TCM2.0
page: 15
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 16
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 1
Place
Placethe
theTV
TVset
setupside
upsidedown
downon
onaatable
tabletop,
top,using
usingthe
thefoam
foambars
bars
Remove the screws that secure the rear cover.
Remove the screws that secure the rear cover.
Be careful:Now
Becareful: Nowthetherear
rearcover
covercould
couldbe
belifted
liftedbut
butthe
theSSBSSBand
andpower
power
supply
supply panel(s) are mounted in the rear cover and still connectedtotothe
panel(s) are mounted in the rear cover and still connected the
LCD panel and other boards.
LCD panel and other boards.
Turn
Turnthe
theset
setnow.
now.
PERSONAL NOTES:
page: 17
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 2
After
Afterturning
turningthe
theset
setremove
removethe
thefront
frontcabinet.
cabinet.
Take
Takecare:
care:Use
Useaaplastic
plasticputty
puttyknife
knifetotorelease
releasethe
theclick’s
click’sas
aslocated.
located.
PERSONAL NOTES:
page: 18
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 2a
Side
Side
Top
See
Seehere
herethe
thelocation
locationofofthe
theclick’s.
click’s.
PERSONAL NOTES:
page: 19
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 2b
Release
Releaseloudspeaker
loudspeakercables
cablesand
andconnection
connectiontotoIR
IRreceiver.
receiver.
PERSONAL NOTES:
page: 20
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 3
To
Toget
getaccess
accesstotothe
theinverter
inverterboard
boardsimply
simplyput
putthe
thepanel
panel
on
onthe
theleft
leftside.
side.
PERSONAL NOTES:
page: 21
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 4
When
Whenlaying
layingthe
thepanel
panelon
ontop
topall
allboards
boardsare
areaccessible.
accessible.
PERSONAL NOTES:
page: 22
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 5
Remove
Remove22screws
screwsatatCinch
Cinchconnectors
connectorsbefore
beforeremoving
removingthe
theSSB.
SSB.
PERSONAL NOTES:
page: 23
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Dismantling step 6
SSB
SSBboard
boardisisgood
goodaccessible
accessibletotodo
domeasurements
measurements
and
andLCD
LCDpanel
panel(so
(sothe
thepicture)
picture)isisvisible.
visible.
PERSONAL NOTES:
page: 24
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 25
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Block Diagram TCM1.0
The
TheMediaTek MT8200isisaahighly
MediaTekMT8200 highlyintegrated
integratedICICused
usedininthe
theTCM1.0E.
TCM1.0E.ITITsupports
supports
video input and output formats up to 1440x900. The MT8200 includes a high-quality
video input and output formats up to 1440x900. The MT8200 includes a high-quality
TV
TVdecoder
decoderretrieving
retrievingthe
thebest
bestimage
imagefrom
frompopular
popularcomposite
compositesignals
signalsand
andembedded
embedded
HDTV/VGA decoders perfectly reproducing the high bandwidth input
HDTV/VGA decoders perfectly reproducing the high bandwidth input signals. signals.
Features
Features
Advanced
AdvancedMDDi(TM)
MDDi(TM)motion
motionadaptive
adaptivede-interlacer
de-interlaceraccordingly
accordinglyconverts
convertsthe
theinterlace
interlace
totoprogressive video overlaying with a 2D graphic processor.
progressive video overlaying with a 2D graphic processor.
AnAnon-chip
on-chipaudio
audioprocessor
processorwith
withaaliplipsync
synccontrol
controldecodes
decodesanalog
analogsignals
signalsreceived
received
from the tuner, delivering high-quality post-processed sound effect.
from the tuner, delivering high-quality post-processed sound effect.
An
Anon-chip
on-chipmicroprocessor.
microprocessor.
High
Highquality
qualityTV
TVdecorder,
decorder,supports
supportsPAL
PAL(B,G,D,H,M,N,I,Nc),
(B,G,D,H,M,N,I,Nc),PAL(Nc),
PAL(Nc),PAL,
PAL,NTSC,
PERSONAL NOTES:
NTSC,
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
NTSC-4.43, SECAM.
NTSC-4.43, SECAM.
AA16/8
16/8bits
bitsdigital
digitalport
portaccept
acceptHDMI
HDMIRx
Rxcoming
comingfrom
fromthe
theMT8293
MT8293HDMI
HDMIreceiver.
receiver.
page: 26
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Main Board TCM1.0
U16 U40
U13
U15
U6
U14
U7
U8
U601
U001
U10
U002 / U003 UM01
Key
Keycomponents:
components:
U001:
U001:Audio
AudioAmplifier
Amplifier
U002: Audio DAC
U002: Audio DAC
U003:
U003:Audio
AudioADC
ADC
U6:
U6: MT8200 MainProcessor
MT8200 Main Processor
U7: DDR
U7: DDR
U8:
U8:Flash
Flash
U10:
U10:Main
MainEEPROM
EEPROM
U12: HDMI receiver
U12: HDMI receiver
U13:
U13:EDID
EDIDEEPROM
EEPROMHDMI HDMI
U14: HDCP Key eeprom
U14: HDCP Key eeprom
U15:
U15:EDID
EDIDEEPROM
EEPROMVGA VGA
PERSONAL NOTES:
page: 27
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Main Board rear side
Rear
Rearside
sideofofthe
thepanel
paneldoes
doesnot
notcontain
containmain
maincomponents.
components.
Clear
Clearvisible
visibleisisthe
thelocation
locationofofthe
theE-pad
E-padfor
forthe
themain
mainprocessor.
processor.
ItItisisimportant
important to heat up this part when removing the processor.We
to heat up this part when removing the processor. We
advice to use a BGA machine to remove and place the
advice to use a BGA machine to remove and place the processor. processor.
PERSONAL NOTES:
page: 28
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 29
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Power
page: 30
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
MT8200
page: 31
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Flash / DDR
page: 32
PERSONAL NOTES:
slide 33
<< TCM1.0E & TCM2.0E >>
page: 33
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
SERVICE TRAINING
PERSONAL NOTES:
slide 34
<< TCM1.0E & TCM2.0E >>
page: 34
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
SERVICE TRAINING
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Tuner
page: 35
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Scart
page: 36
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Video input
page: 37
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Audio Amp
External
Externalaudio
audioinput
inputisisselected
selectedbybythe
theaudio
audiosource
sourceselect
selectU16.
U16.
The output of the source select is connected to the ADC (U003).
The output of the source select is connected to the ADC (U003).
The
TheI2S
I2Soutput
outputisisthe
theinput
inputfor
forthe
theMT8200.
MT8200.After
Afteraudio
audiosignal
signalprocessing
processing
ininthe MT8200, a I2S output is connected to the DAC (U002).
the MT8200, a I2S output is connected to the DAC (U002).
From
Fromthe
theDAC
DACthe
theleft
leftand
andright
rightaudio
audiochannels
channelsare
areamplified
amplifiedby
bythe
the
TDA7266 (U001) The TDA7266 is a dual bridge amlifier.
TDA7266 (U001) The TDA7266 is a dual bridge amlifier.
PERSONAL NOTES:
page: 38
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
HDMI Switch
The
TheHDMI
HDMIconnector
connectorisisconnected
connectedtotoU40.
U40.This
Thisisisaaport
portprotector.
protector.
HDMI
HDMIsignals
signalsarearereceived
receivedby
bythe
theMT8293.The
MT8293.Thethree threeTMDS
TMDSdata
dataand
and
clock
clock channels, (these are the channels used to carry video, audioand
channels, (these are the channels used to carry video, audio and
auxiliary data) are converted to 16/8 bits digital signal connected to
auxiliary data) are converted to 16/8 bits digital signal connected to th th
input
inputport
portofofthe
theMT8200.
MT8200.
HDMI
HDMIEdid
Ediddata
dataisisstored
storedininthe
theeeprom
eepromU13.
U13.Thsi
Thsieeprom
eepromisissupplied
suppliedby
by
the HDMI plugpower. This means that the data is also available
the HDMI plugpower. This means that the data is also available for afor a
source
sourcewhen
whenthe
theTVTVset
setisisswitched
switchedoff.
off.
U14
U14contains
containsthe
theHDCP
HDCPkeys.
keys. TMDS Channel 0
PERSONAL NOTES:
TMDS Channel 1
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
TMDS Channel 2
TMDS Clock Channel
page: 39
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
DC-DC
UM01
UM01isisthe
thestandby
standbyprocessor.
processor.Via
Viathe
thePower
PowerStandby
Standbyline
line(pin4)
(pin4)the
the
5V and 12V are switched (via U505)
5V and 12V are switched (via U505)
From
Fromeco-standby
eco-standbythe
theset
setcan
canbe
beswitched
switchedon
onvia:
via:
Local
LocalPower
PowerKey
Key
IR command
IR command
Scart
ScartFast
FastBlanking
Blanking
COM
COMisishigh
highinincase
caseofofcommunication
communicationvia
viaI2C.
I2C.
Protection:
Protection:InIncase
caseoneoneofofthe
thevoltages
voltagesVCC,
VCC,DV33B,
DV33B,V33 V33ororSB33
SB33isisnot
not
present DEC will get low. The standby processor will switch off the set.
PERSONAL NOTES:
present DEC will get low. The standby processor will switch off the set.
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
page: 40
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 41
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Block Diagram TCM2.0
page: 42
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Main Board
U904
U100
U502 U203
U204
U501
U202 U810
U100:
U100:IFIFdemodulator
demodulator(analogue)
(analogue)
U202
U202Flash
Flash
U203
U203Main
Mainvideo
videoprocessor
processor
U204
U204SDRAM
SDRAM
U501
U501DVBT
DVBTCam
CamSwitch
Switch
U502
U502digital
digitalchannel
channeldecoder
decoder
U810
U810MCU
MCUStandby
Standby
U904
U904HDMI
HDMISwitch
PERSONAL NOTES:
Switch
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
page: 43
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Main Board
page: 44
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Diagrams TCM2.0
page: 45
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 46
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Diagrams TCM2.0
page: 47
<< TCM1.0E & TCM2.0E >>
Subjects
SERVICE TRAINING
• Objective
• Range overview and features
• Mechanical overview
• Block Diagram TCM1.0
• Diagrams TCM1.0
• Block Diagram TCM2.0
• Diagrams TCM2.0
• Service chapter
page: 48
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
CSM TCM1.0
page: 49
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Entering the “FactoryMenu”
IfIfaarepair
repairneed
needmore
moreoften
oftentotoenter
enterFactory
FactoryMenu
Menuthe
theFactory
FactoryMenu
Menucan
can
be set in Enable mode.
be set in Enable mode.
To
Toenable/disable
enable/disable“FactoryKey”,
“FactoryKey”,,please
,pleasetotofollow
followbelow
belowsteps:
steps:
- -press
pressRemoteControl
RemoteControl“Zoom+”key
“Zoom+”keytotoenter
enterinto
into“System”
“System”submenu
submenu
- -press
pressRemoteControl
RemoteControl“Down”
“Down”key
keytill
till“FactoryKey”
“FactoryKey”item
item
- -press
pressRemoteControl
RemoteControl“Zoom+”key
“Zoom+”keytototoggle
togglemode
mode
ToTopop-up
pop-upFactory
FactoryMenu
Menuinincase
caseofof“FactoryKey”
“FactoryKey”isisenabled,
enabled,
follow below step:
PERSONAL NOTES:
- -press
pressRemoteControl
RemoteControlkey
key“Blue”
“Blue”
page: 50
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Factory Menu System TCM1.0
Pattern
Patterntest:
test:select
select1-5
1-5for
fordifferent
differentpatterns
patternsgenerated
generatedby
byMT8200.
MT8200.
Pattern
Pattern66runs
runsdifferent
differentpatterns
patternsautomatically.
automatically.
InInthis
this mode the RC is disabled. Thismode
mode the RC is disabled. This modecan
canbe
beused
usedfor
fortesting
testingthe
the
set! To exit this mode press the local menu button on the
set! To exit this mode press the local menu button on the set!set!
page: 51
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu Balance TCM1.0
page: 52
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu TV Geometry TCM1
page: 53
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu Nicam TCM1.0
Item
Item
Sub-item
Sub-item
Don’t
Don’tmodify
modify
Nicam Correct Thres 5
Nicam Correct Thres 5
Sync Loop 50
Sync Loop 50
Error Thre 6
Error Thre 6
ParityErrorThres 47
ParityErrorThres 47
EveryNumFrames 32
EveryNumFrames 32
A2 system 4
A2 system 4
PERSONAL NOTES:
page: 54
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu Mono TCM1.0
Item
Item
Sub-item
Sub-item
Don’t
Don’tmodify
modify
Mono High DEVI OFF
Mono High DEVI OFF
AM Mute ON
AM Mute ON
AM Mute High 69
AM Mute High 69
AM Mute Low 53
AM Mute Low 53
Carrier Shift OFF
Carrier Shift OFF
Saturation Mute OFF
Saturation Mute OFF
FM Mute ON
FM Mute ON
FM Mute High 24
FM Mute High 24
FM Mute Low 19
FM Mute Low 19
PERSONAL NOTES:
page: 55
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu Sound TCM1.0
Item
Item
Sub-item
Sub-item
Volume
VolumeCurve
Curve
Sound VOL_0 0
Sound VOL_0 0
VOL_10 4
VOL_10 4
VOL_30 25
VOL_30 25
VOL_50 90
VOL_50 90
VOL_90 150
VOL_90 150
VOL_100 254
VOL_100 254
TV Pre 53
TV Pre 53
AV Pre 60
AV Pre 60
SWPREQ 10
SWPREQ 10
PERSONAL NOTES:
page: 56
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu Other TCM1.0
Item
Item
Sub-item
Sub-item
Don’t
Don’tmodify
modify
Other Blue Mute ON
Other Blue Mute ON
CTI Middle
CTI Middle
Flesh Tone ON
Flesh Tone ON
Deinter Mode Automatic
Deinter Mode Automatic
White Peak Limiter ON
White Peak Limiter ON
MDDi Kenar korkuma (Edge Pre )High
MDDi Kenar korkuma (Edge Pre )High
TTX Contrast 10
TTX Contrast 10
Seamless OFF
Seamless OFF
PERSONAL NOTES:
page: 57
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu Info TCM1.0
page: 58
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
FactoryMenu Factory Default TCM1.0 Setti
User Menu Source TV(channel 1)
Dynamic Contrast ON
Tone Normal
Volume 30
Flesh Tone ON
page: 59
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Electrical Alignment TCM1.0
page: 60
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
ADC Calibration TCM1.0
Three inputs require an ADC calibration for the time being that are:
VGA
Provide a test signal 1024×768@60Hz with WhiteBlack squares.
Select the corresponding “Balance/RGBCalibrate” submenu item from “FactoryMenu”,
then press ”Zoom+” to start.
CMP
Provide a test signal 576i@50Hz with 100% 8 steps ColorBar.
Select the corresponding “Balance/RGBCalibrate” submenu item from “FactoryMenu”,
then press ”Zoom+” to start.
The ADC is well performed when it’s displayed “CMP” after few seconds.
SCART-RGB
page: 61
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
CSM TCM2.0
Menu
MenuExplanation
Explanation
1.1.Model NumberType
ModelNumber Typenumber
numberand
andregion.
region.
2.2.Production
ProductionSerial NumberProduct
SerialNumber Productserial
serialno.
no.
3.3.SW VersionSoftware
SWVersion Softwarecluster
clusterand
andversion
versionisisdisplayed
displayed(TC
(TC
==TCL,
TCL,M2
M2==MTK2,
MTK2,EE==Europe,
Europe,0.49
0.49==software
softwareversion).
version).
4.4.Codes
CodesError
Errorbuffer
buffercontents.
contents.
5.5.SSB
SSBSSB
SSBserial
serialnumber.
number.
6.6.DISPLAY
DISPLAYDisplay
Displaytype.
PERSONAL NOTES:
type.
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
7.7.NVM VersionNVM
NVMVersion NVMversion.
version.
8.8.Key
Key(HDCP) HDMIShows
(HDCP)HDMI ShowsValid
Validororinvalid
invalidHDCP
HDCPkey
keywhen
when
HDMI
HDMIconnected.
connected.Else
Elseblank.
blank.
9.9.Digital
DigitalSignal Quality..%
SignalQuality ..%(antenna
(antennasignal).
signal).
10.
10.Audio SystemAudio
AudioSystem Audiosystem
system(Mono/Stereo/Nicam
(Mono/Stereo/Nicamstereo)
stereo)
11.
11.n.a.
n.a. page: 62
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
SAM TCM2.0
page: 63
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
SAM TCM2.0
page: 64
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
SAM TCM2.0
page: 65
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
SAM TCM2.0
page: 66
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
SAM TCM2.0
page: 67
<< TCM1.0E & TCM2.0E >>
SERVICE TRAINING
Blinking LED TCM2.0
Basically
Basicallythere
thereare
aresix
sixkind
kindofoferrors:
errors:
Code
Code Description
Description
00 no
noerror
error
33 μP
μPContro
Contro
44 General
GeneralI2C
I2Cbus
busError
Error
77 TunerI2C-bus
TunerI2C-bus
88 Demodulator
Demodulator
10
10MT8295
PERSONAL NOTES:
MT8295
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
11
11MT5133
MT5133
13
13HDMI
HDMIswitch
switch
page: 68
PERSONAL NOTES:
<< TCM1.0E & TCM2.0E >>
page: 69
© Copyright reserved 2007 Philips Consumer Electronics Euroservice
SERVICE TRAINING