Biotron GX PDF

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

220X285_영문완료 2012.3.

21 2:59 PM 페이지74 printcafe DDD-MONO3000 2400DPI 175LPI T

Autoclavable Fermentor

Biotron GX
TYPE 1

50RPM~ Vessel : 1.5L ~ 14L


1.5L~14L 1,200RPM Temp : Ambient +3 C ~ 80 C
Speed : 50RPM ~ 1200RPM

Main Control Screen PC Monitoring Software


Autoclavable Fermentor

Features
•Intelligent 7" wide touch screen fermentation controller •Remote control by PC software Data Logging system
•Self data logging system within fermentation controller •Easy to calibrate temperature, pH, DO, foam sensors in use of graphic
•High density fermentation : DO-stat, pH-stat, Exponential feeding, etc calibration mode
•Parallel design of vessel and controller : 4 peristaltic pump and pH, DO, foam, •Reliable operation due to the automatic controllers.
74 temperature sensor port •Intelligent self diagnostic system to maintain fermentation process from start to
•Easy control of external device by fermentation controller : O2/CO2 analyzer, the end : Diagnostic, Setup, Dead Band, Offset, Warning, Feeding condition
glucose analyzer, spectrophotometer, fluorescence, spectrophotometer, NIR, •Easy to setup feeding program
gas mixer, level, weight, etc •Programmable multi stage operation : Setting pH, DO, Foam, temperature for
•Accurate PID temperature controller system each stage to the end of the fermentation process
•Hi-res color touch screen is built-in, hence it is easy to learn how to use •Stainless steel ring-shaped sparger consistently supplies gas for manufacturing
controller process
•Instead of wires, one-chip Micom is applied for minimizing noise and making •Easily disassembling sprager for cleaning inside
set-up process simpler •Controls agitation speed precisely despite of viscosity changing of culture
•unified ATMega128 CPU and sensor board into One-board to handle problems media by servo motor which controls agitation speed in real time
immediately in case of emergency •Records monitored agitation speed to save extra emission

Specification
Drive Top drive motor(mechanical drive)
Agitation Range 50~1,200 rpm
Impeller 2-Rushton turbine impeller, 1-foam breaker
Temperature Range & Sensor Ambient + 3。 C~80。 C, RTD(Pt-100), PID control
Sparger & Gas mode Ring sparger(Round Type), 2gas and 4 gas Mixer(Option)
Aeration
Inlet Filter 0.2㎛ air filter cartridge
Exhaust system Filter & Condenser 0.2㎛ air filter, SUS 316 Condenser
Range 2.0~12.0 pH of set point, PID control
pH
Electrode Gel Type
Range 0~200%, PID control
DO
Electrode Polarographic Type
Anti-foam Electrode Conductivity Type
Peristaltic Pumps 4 constant speed pumps each assignable to a wide variety of function fo
Control
control of acid, base, foam and feed
Recording pH, DO, Temp, Foam, Agitation, Peristaltic pump, etc.
Dimension 550(W) x 480(L) x 550(H) (Single Vessel 5L), Controller Size : 220(W) x 478(L) x 445(H))
Voltage 220V, 1Ø, 50/60Hz, 0.6kW
Weight 35kg (Controller : 20kg, Vessel 5L 1set : 15kg)
Please note that technical specifications subject to change.

You might also like