Professional Documents
Culture Documents
DR Abdul Rehman Rice
DR Abdul Rehman Rice
Q1: What are the varieties for dry or aerobic rice cultivation?
Ans: There is no specific rice variety for the aerobic rice planting. The rice varieties
being used by
the farmers can also be used in dry rice planting. Aerobic or dry rice culture is a new method in
which rice is planted as direct seeding like wheat or maize crop. , any other approved rice variety
can be used for this system.
Ans; First of all, prepare the land in dry to fine seedbed and then irrigate it. At optimum
moisture condition, again prepare the seedbed to fine with 2-3 ploughings and planking. Then,
use Rabi Drill/Zero-Till Drill in well-leveled field at optimum moisture level for seed sowing at a
distance of 9”. In case, the drill is not available, seed (soaked for 30-35 hours) may be broadcast
in open tilled field and then planked.
Ans: For basmati rice varieties, seed should be 12-14 kg per acre. The seed may be soaked
for 15 hours and dry it for few hours in the shade to decrease its moisture content which
facilitates its free flow during seed drilling. Soaking of seed with Topsin-M/Vitawax (@ 2 gram/Kg
of seed) eliminates or reduces seed borne and soil-born diseases.
Ans: The best planting time of aerobic rice is 15 to 20 days earlier than the traditional
transplanting period. So, for basmati rice varieties, June 10-30 is optimum time while, for non-
basmati rice varieties, May 15-June 10 is the appropriate time.
Ans: Absolutely not. Aerobic ricecrop does not require continuous flooding and can be safely
irrigated. First irrigation may be given when germination completes and plants require irrigation
water, most probably at 12-15 days after sowing. Subsequent irrigations may be given in 3-4
days intervals to keep the field saturated up to 40 days. Then, the interval between irrigations
may be increased to keep the field at optimum moisture level (Watter). However, water stress be
avoided at tilling, panicle initiation, and grain filling stages which are very crucial for obtaining
higher yields.
Ans: Weeds are a major concern for high productivity in aerobic rice crop. The pre planting
herbicides like Pendimethalin, Stamp should be applied immediate after seeding. Then, at 30-35
days after sowing, when maximum weeds appear, post-emergence herbicides like,
Clover (Nominee; marketed by Four-Brother Ltd) can be used for effective control of grass
weeds. For the control of Sedges (Deela, ghuin, bhuin, etc), Sunstar/Starline may also be used.
Ans: Full dose of P and K (1-1.5 bags DAP and 1 bag SOP per acre) may be applied at
sowing. While, 80 per cent of the recommended dose of Nitrogen (2.0-2.5 bags Urea for Basmati
& 2.5-3.0 bags for non-basmati) should be applied between 30-70 days after sowing of rice. The
remaining 20 % nitrogen may be applied before flowering.
Ans: Good quality seed is pre-requisite for high productivity. It should possess the following
characteristics:
Varietal purity
Uniform size
Ans: Farmers can get certified rice seed from the following sources.
These agencies supply only 8-10% of the total required seed. The remaining 90% seed is
produced by the farmers themselves
Ans: Farmers can produce the seed of approved rice varieties at their own farms to meet their
needs. Farmers must follow the given instructions.
Selection of field:Select a field of farm which is free from soil borne diseases.
Isolation:For Seed purpose, different varieties should not be grown adjacent to each
other to avoid out crossing. Isolation in time may be a possibility otherwise suitable space
isolation could be used effectively.
Protection from insect pests, diseases and weeds:Crop must be fully protected through
cultural practices and pesticide use.
Rouging:Removal of undesired plants from seed crop is necessary for seed purification.
Best rouging time is when the crop is in full flowering stage.
Harvesting and threshing:Normally the appropriate harvesting time ranges from 30-35
days after flowering when 85-95% panicle becomes straw coloured. Keep the harvested crop 2-3
days for drying before threshing. Do not harvest seed crop with combines to avoid admixture.
Threshing floor should be kept clean during harvesting and threshing operations. After drying
and cleaning, seed should be packed in bags, labeled and stored properly.
Ans:
Area Variety type Seeding time Seed rate/acre
In all parts of the country, rice crop is established by transplanting 30-35 days old
nursery. To get higher yields, recommended sowing and transplanting schedule must be
followed.
Q12: What are the recommended rice varieties and their area of cultivation?
Ans: There are three types of rice varieties are grown in Pakistan, viz; Basmati type, IRRI type
and Cold tolerant (bold and short grains). These varieties are area specific depending on
environmental condition.
Central Punjab
Basmati 370, Basmati Pak, Basmati 385, Super Basmati, Basmati
2000, Shaeen Basmati, Basmati 515, KS-282, KSK-133, NIAB IR-9.
Basmati 198, Super Basmati, KS-282, KSK-133, and rice hybrids
Southern Punjab
Upper Sindh
IR-6, DR-82, DR-83, DR-92, Sada Hayat, Sarshar, Shahkar and rice
hybrids
IR-6, Shadab, Shua-92, Khushboo-95 and hybrids
Lower Sindh
Baluchistan IR-6, DR-83, Sarshar, Sada Hayat, Shahkar and rice hybrids
KPK (plains) IR-6, KS-282, KSK-133
KPK (Swat area etc) JP-5, KashmirNafees, Swat-I, Swat-II, Dilrosh-97, Fakher-e- Malakund
Q13: Are there recommended rice hybrids available and their area of cultivation?
Ans: The rice hybrids are getting popular in the country and so far36 six rice hybrids
belonging to different Seed Companies have been recommended by VEC for general cultivation
in Sindh, Baluchistanand Southern Punjabonly.
Ans:
All Phosphorus (P) and Potash (K) and half of the Nitrogen (N) should be applied at the time
of land preparation. The remaining Nitrogen should be applied in two splits; one after 35 days
of transplanting and other before flowering. The fertilizer doses can be adjusted according to
level of soil fertility.
Ans: Yes, all the rice soils in Pakistanare deficient in Zinc. The symptoms zinc appears after
3-4 weeks after transplanting in the shape of brown spot on leaves. To overcome this problem,
apply Zinc Sulphate (35%) @ 8 kg per acre after two weeks of rice transplanting. Or enrich
rice nursery with Zinc Sulphate (35%) @ 30 kg per acre of rice nursery. In this way,
there is no need to apply Zinc to transplanted crop.
Ans: Rice soils have been exhausted by continuous cultivation of rice and wheat and have
become deficient in organic matter. To improve physical health of soil, green manuring
(with dhaincha or sunnhemp or guara or cowpeas) or inclusion of legumes in between rice and
wheat crops is must. Similarly, incorporation of rice and wheat straw (instead of burning) in soil
can also help in increasing organic matter of the soil.
Ans: The rice mainly suffers from bacterial leaf blight, blast and brown leaf spot, stem rot,
kernel smut and false smut which cause substantial losses annually. These diseases can be
managed by applying integrated approach. Such as:
Crop rotation
Field sanitation
Ans: In Pakistan, major insect pests are stem borers, leaffolder and whitebacked planthopper,
which cause 15-20 % on recurrent basis. The mealy bugs occur periodically in Sindh. The
incidence of pests varies from one region to other: Leaffolder is predominant all over the rice
growing areas, stem borers are predominant in Punjaband D. I. Khan areas, whitebacked
planthopper in Sindh and Baluchistanand grasshoppers in Swat areas.
Farmers mainly use insecticide to control these pests. No single method can mange all the pests
or even a single pests under all situations. Integrated pest management (IPM) offers promise to
reduce dependence on pesticides. IPM is an intelligent selection and use of pest management
tactics by taking into consideration appropriate economical, ecological and sociological factors.
Pests can be managed by logical integration of various tactics like use of resistant varieties,
modifications of pest environment (removal of alternate food sources, timely sowing, water
management (AWD) and manipulation of biodiversity in agri-matrix), conservation and utilization
of bio-control agents (parasitoids, predators etc), balanced use of fertilizers and when necessary,
an appropriate and timely use of insecticides. It is therefore, imperative to adopt integrated
approach for the management of these pests and achieve sustainable crop production and
environmental protection.
Ans: Timely harvesting ensures optimum grain yield and quality, higher market and
consumers’ acceptance. Generally, the appropriate harvesting time ranges from 30-35 days
after flowering. This is the stage when 85-95 % of upper portion of panicle is straw coloured.
Harvested crop is left 2-3 days in field for drying. Best results can be obtained only if crop is
harvested in the morning and threshed in the afternoon on the same day.Threshed paddy should
be cleaned properly to fetch good market price. Now a days, mostly paddy is harvested with
combines in Punjab, which causes lot of damage to grains and reduce less milling recovery.
Ans: There is no specific rice variety for the aerobic rice planting. The rice varieties being used
by the farmers can also be used in dry rice planting. Aerobic or dry rice culture is a new method
in which rice is planted as direct seeding like wheat or maize crop. , any other approved rice
variety can be used for this system.
Ans: First of all, prepare the land in dry to fine seedbed and then irrigate it. At optimum moisture
condition, again prepare the seedbed to fine with 2-3 ploughings and planking. Then, use Rabi
Drill/Zero-Till Drill in well-leveled field at optimum moisture level for seed sowing at a distance of
9”. In case, the drill is not available, seed (soaked for 30-35 hours) may be broadcast in open
tilled field and then planked.
Q3: How much seed can be used?
Ans: For basmati rice varieties, seed should be 12-14 kg per acre. The seed may be soaked for
15 hours and dry it for few hours in the shade to decrease its moisture content which facilitates
its free flow during seed drilling. Soaking of seed with Topsin-M/Vitawax (@ 2 gram/Kg of seed)
eliminates or reduces seed borne and soil-born diseases.
Ans: The best planting time of aerobic rice is 15 to 20 days earlier than the traditional
transplanting period. So, for basmati rice varieties, June 10-30 is optimum time while, for non-
basmati rice varieties, May 15-June 10 is the appropriate time.
Ans: Absolutely not. Aerobic rice crop does not require continuous flooding and can be safely
irrigated. First irrigation may be given when germination completes and plants require irrigation
water, most probably at 12-15 days after sowing. Subsequent irrigations may be given in 3-4
days intervals to keep the field saturated up to 40 days. Then, the interval between irrigations
may be increased to keep the field at optimum moisture level (Watter). However, water stress be
avoided at tilling, panicle initiation, and grain filling stages which are very crucial for obtaining
higher yields.
Ans: Weeds are a major concern for high productivity in aerobic rice crop. The pre planting
herbicides like Pendimethalin, Stamp should be applied immediate after seeding. Then, at 30-35
days after sowing, when maximum weeds appear, post-emergence herbicides like, Clover
(Nominee; marketed by Four-Brother Ltd) can be used for effective control of grass weeds. For
the control of Sedges (Deela, ghuin, bhuin, etc), Sunstar/Starline may also be used.
Ans: Full dose of P and K (1-1.5 bags DAP and 1 bag SOP per acre) may be applied at sowing.
While, 80 per cent of the recommended dose of Nitrogen (2.0-2.5 bags Urea for Basmati & 2.5-
3.0 bags for non-basmati) should be applied between 30-70 days after sowing of rice. The
remaining 20 % nitrogen may be applied before flowering.
Ans: Good quality seed is pre-requisite for high productivity. It should possess the following
characteristics:
Ans: Farmers can get certified rice seed from the following sources.
These agencies supply only 8-10% of the total required seed. The remaining 90% seed is
produced by the farmers themselves
Ans: Farmers can produce the seed of approved rice varieties at their own farms to meet their
needs. Farmers must follow the given instructions.
• Selection of field: Select a field of farm which is free from soil borne diseases.
• Isolation: For Seed purpose, different varieties should not be grown adjacent to each other
to avoid out crossing.
Isolation in time may be a possibility otherwise suitable space isolation could be used
effectively.
• Protection from insect pests, diseases and weeds: Crop must be fully protected through
cultural practices and pesticide use.
• Rouging: Removal of undesired plants from seed crop is necessary for seed purification.
Best rouging time is when the
crop is in full flowering stage.
• Harvesting and threshing: Normally the appropriate harvesting time ranges from 30-35
days after flowering
when 85-95% panicle becomes straw coloured. Keep the harvested crop 2-3 days for
drying before threshing.
Do not harvest seed crop with combines to avoid admixture. Threshing floor should be kept
clean during
harvesting and threshing operations. After drying and cleaning, seed should be packed
in bags, labeled and stored properly.
Ans:
In all parts of the country, rice crop is established by transplanting 30-35 days old nursery. To get
higher yields, recommended sowing and transplanting schedule must be followed.
Q12: What are the recommended rice varieties and their area of cultivation?
Ans: There are three types of rice varieties are grown in Pakistan, viz; Basmati type, IRRI type
and Cold tolerant (bold and short grains). These varieties are area specific depending on
environmental condition.
Central Punjab
Basmati 370, Basmati Pak, Basmati 385, Super Basmati, Basmati
2000, Shaeen Basmati, Basmati 515, KS-282, KSK-133, NIAB IR-9.
Basmati 198, Super Basmati, KS-282, KSK-133, and rice hybrids
Southern Punjab
Upper Sindh
IR-6, DR-82, DR-83, DR-92, Sada Hayat, Sarshar, Shahkar and rice
hybrids
IR-6, Shadab, Shua-92, Khushboo-95 and hybrids
Lower Sindh
Baluchistan IR-6, DR-83, Sarshar, Sada Hayat, Shahkar and rice hybrids
Q13: Are there recommended rice hybrids available and their area of cultivation?
Ans: The rice hybrids are getting popular in the country and so far 36 six rice hybrids belonging
to different Seed Companies have been recommended by VEC for general cultivation in Sindh,
Baluchistan and Southern Punjab only.
Ans:
Rice varieties Fertilizer dose (N-P-K kg/acre)
All Phosphorus (P) and Potash (K) and half of the Nitrogen (N) should be applied at the time of
land preparation. The remaining Nitrogen should be applied in two splits; one after 35 days of
transplanting and other before flowering. The fertilizer doses can be adjusted according to level
of soil fertility.
Ans: Yes, all the rice soils in Pakistan are deficient in Zinc. The symptoms zinc appears after 3-4
weeks after transplanting in the shape of brown spot on leaves. To overcome this problem, apply
Zinc Sulphate (35%) @ 8 kg per acre after two weeks of rice transplanting. Or enrich rice nursery
with Zinc Sulphate (35%) @ 30 kg per acre of rice nursery. In this way, there is no need to apply
Zinc to transplanted crop.
Ans: Rice soils have been exhausted by continuous cultivation of rice and wheat and have
become deficient in organic matter. To improve physical health of soil, green manuring (with
dhaincha or sunnhemp or guara or cowpeas) or inclusion of legumes in between rice and wheat
crops is must. Similarly, incorporation of rice and wheat straw (instead of burning) in soil can also
help in increasing organic matter of the soil.
Q17: What are main diseases and how can we manage them?
Ans: The rice mainly suffers from bacterial leaf blight, blast and brown leaf spot, stem rot, kernel
smut and false smut which cause substantial losses annually. These diseases can be managed
by applying integrated approach. Such as:
• Seed treatment with available seed dresser like Topsin M (70%) WP
Q18: What are major insect pests of rice and their management?
Ans: In Pakistan, major insect pests are stem borers, leaffolder and whitebacked planthopper,
which cause 15-20 % on recurrent basis. The mealy bugs occur periodically in Sindh. The
incidence of pests varies from one region to other: Leaffolder is predominant all over the rice
growing areas, stem borers are predominant in Punjab and D. I. Khan areas, whitebacked
planthopper in Sindh and Baluchistan and grasshoppers in Swat areas.
Farmers mainly use insecticide to control these pests. No single method can mange all the pests
or even a single pests under all situations. Integrated pest management (IPM) offers promise to
reduce dependence on pesticides. IPM is an intelligent selection and use of pest management
tactics by taking into consideration appropriate economical, ecological and sociological factors.
Pests can be managed by logical integration of various tactics like use of resistant varieties,
modifications of pest environment (removal of alternate food sources, timely sowing, water
management (AWD) and manipulation of biodiversity in agri-matrix), conservation and utilization
of bio-control agents (parasitoids, predators etc), balanced use of fertilizers and when necessary,
an appropriate and timely use of insecticides. It is therefore, imperative to adopt integrated
approach for the management of these pests and achieve sustainable crop production and
environmental protection.
Ans: Timely harvesting ensures optimum grain yield and quality, higher market and consumers’
acceptance. Generally, the appropriate harvesting time ranges from 30-35 days after flowering.
This is the stage when 85-95 % of upper portion of panicle is straw coloured. Harvested crop is
left 2-3 days in field for drying. Best results can be obtained only if crop is harvested in the
morning and threshed in the afternoon on the same day. Threshed paddy should be cleaned
properly to fetch good market price. Now a days, mostly paddy is harvested with combines in
Punjab, which causes lot of damage to grains and reduce less milling recovery.
Resource Person