Professional Documents
Culture Documents
Pilots and Accessories: Application: Operation
Pilots and Accessories: Application: Operation
Pilots and Accessories: Application: Operation
APPLICATION: OPERATION:
For pressure reducing service where a supply of constant The diaphragm-operated design delivers constant down-
reduced pressure is required for pneumatic instruments and stream pressure by quickly responding to changes in volume
pilot operated controllers. requirements. The DIAPHRAGM-SEAT ASSEMBLY moves
freely up and down in response to slight changes in vol-
FEATURES: ume demand at the outlet port. As the DIAPHRAGM-SEAT
Easily adjusted ASSEMBLY moves the gap between the NOZZLE and NYLON
Internally relieving SEAT changes, compensating for the change in volume demand.
Available in Aluminum and 316 Stainless Steel INLET PRESSURE:
4000 max. psig
CERTIFICATIONS:
Canadian Registration Number (CRN): DESIGN PRESSURE:
0C15352.24567890NTY 5500 max. psig
OPERATING TEMPERATURE:
0°F to 200°F (-18°C to 93°C)
Cf & Cv VALUES
Cf Cv
Diaphragm Assembly 0.70 0.10
Input Pressure
CAPACITY CHART
32
Output Pressure
31
OUTPUT PRESSURE psig.
30
29
Adjusting Screw 28
27
1500 psig
26
100 psig
25
250 psig 500 psig
Spring
100 20 30 40 50 60 70 80 90 100 1100
STANDARD CUBIC FEET PER HOUR; AIR*
INITIAL SET POINT AT 30 psig AT 120 S.C.F.H.
Diaphragm Assembly INLET PRESSURE INDICATED ON EACH CURVE.
*FOR CAPACITIES IN S.C.F.H. OF GAS AT .65 SPECIFIC GRAVITY
MULTIPLY FLOW RATE BY 1.24
Nozzle
Nylon Seat
1676
Nut 1676SS6 Adjusting Screw 5326
5326SS6
5237
Diaphragm Plate 5242 Bonnet 5237SS6
5242SS6
REGULATOR
DIMENSIONS
REGULATORS AVAILABLE:
CAT. INLET OUTLET
NO. REG. MATERIAL PRESS. PRESS. KIT
3
58
YAV 12 SGR ALUM. 4000 max. 10-250 RSP
YAVS6 12 SGR-SS6 316 SS 4000 max. 10-250 RSP Inlet
*These parts are recommended spare parts and are stocked as Outlet Outlet
repair kits.
19
132
1
22