Professional Documents
Culture Documents
PFG PDI Form
PFG PDI Form
Brand Model
Tractor VIN (17 digit #)
Engine Serial number Transmission S/N
Inspection Information
Inspected by Date
Dealer Name Location
General Checks
Yes No Remarks
Check Conformity of Product to purchase order
Check general condition: damage, dirt, rust, etc.
Check accessories are present or fitted (toolbox, radio,
rotating beacon, etc.)
Check for presence of operator manual and correct language
Check for presence of Limited warranty statement
Engine Compartment
Check closure and fixing of engine hoods and side panels
Check Engine oil level
Check Engine coolant level
Check Brake pedal oil level
Check Fluid level in clutch reservoir
Check visually coolers and pipes for leaks
Check correct assembly and fastening of the clamps securing air
intake, intercooler, turbocharger and air cleaner manifolds and
hoses.
Check battery, electrolyte level, connectors, ground cable
Check / Inspect of main fuse and preheating fuse
Transmission
Grease all grease points (see operator manual for locations)
Check gearbox oil level
Check rear axle final drive oil level
Check front axle housing oil level
Check front differential oil level
Check Front axle final drive oil level
Check Separate hydraulic tank oil level
Check Front PTO oil level
Check transmission & front axle breather (not clogged by debris)
check three-point hitch: fixing of auxiliary jacks, installation of
stabilizers, selection of working positions
Check and adjust for correct wheel track front and rear
(according to customer need)
Check and adjust the front wheel steering angle
Check and adjust front fenders
Check front-rear wheel and rim bolts for prescribed torque
values
Check if correct wheel studs are fitted , in case of dual wheels
Check tire air pressure / value according tire manufacturer,
model and load
Check visually pipes, lines, harnesses for leaks, loose brackets,
etc.
Check counterweigh supports, front lift frame , front loader
frame, drawbar brackets
Check and tighten towing hitch mounting assembly
Crawler
Check chain tension
Check steering system; oil level and correct operation
Final Preparation
Remove plastic protections
Repaint if necessary paint damage (during transportation or
other)
Check for the presence of the accessories supplied in the
equipment package and/or ordered by the customer
Do final cleaning before delivery
Customer
Customer signature Date