This welding inspection report summarizes the connection of Sarqala-4 well to Sarqala-3. It lists two pipe sections, an elbow, and another pipe section that were welded with welds W-48T and W-50T. The pipes and elbow are 8 inches in diameter, API 5L X52 steel, and were welded according to welding procedure specification WPS-002. The report provides details on pipe characteristics, materials, welder IDs, and was prepared, controlled, and approved by Bestoon Ahmed on 21-10-20.
This welding inspection report summarizes the connection of Sarqala-4 well to Sarqala-3. It lists two pipe sections, an elbow, and another pipe section that were welded with welds W-48T and W-50T. The pipes and elbow are 8 inches in diameter, API 5L X52 steel, and were welded according to welding procedure specification WPS-002. The report provides details on pipe characteristics, materials, welder IDs, and was prepared, controlled, and approved by Bestoon Ahmed on 21-10-20.
This welding inspection report summarizes the connection of Sarqala-4 well to Sarqala-3. It lists two pipe sections, an elbow, and another pipe section that were welded with welds W-48T and W-50T. The pipes and elbow are 8 inches in diameter, API 5L X52 steel, and were welded according to welding procedure specification WPS-002. The report provides details on pipe characteristics, materials, welder IDs, and was prepared, controlled, and approved by Bestoon Ahmed on 21-10-20.
This welding inspection report summarizes the connection of Sarqala-4 well to Sarqala-3. It lists two pipe sections, an elbow, and another pipe section that were welded with welds W-48T and W-50T. The pipes and elbow are 8 inches in diameter, API 5L X52 steel, and were welded according to welding procedure specification WPS-002. The report provides details on pipe characteristics, materials, welder IDs, and was prepared, controlled, and approved by Bestoon Ahmed on 21-10-20.
ENGINEERING, PROCUREMENT AND CONSTRUCTION OF SARQALA-4 WELL CONNECTION TO SARQALA-3
REPORT NO : GM552-55219-104-PL-RP-0011 DWG NO :GM552-55219-104-PL-DD-0002,0003,0004 LOCATION: S4 to S3 PROGRESS NO : 0028 Page : 1 of 1 DATE : 21-10-20 PIPE CHARACTERISTIC DIA WELDER ID PIPE NO HEAT NO KP WELD NO MATERIAL / GRADE WPS NO REMARKS THK LENGTH BEND ANGLE (INCH) ROOT HP FILLER CAP PIPE 226 N/A 8.18 7.590 - - KP-02 W-48T 8 API 5L X52 PSL2 WPS-002 W-3/W-5 W-3/W-5 W-3/W-5 W-3/W-5 PIPE 227 N/A 8.18 11.750 - -