Professional Documents
Culture Documents
SRI FireFighting Equipments 2012 PDF
SRI FireFighting Equipments 2012 PDF
Features
Certified Product
APPROVAL FIRE HOSE REELS
• Outlet connection for hose can be rotated for left and right direction
• Waterways made from non ferrous metals which ensure corrosion free*
• Maximum working pressure 15Bar, test pressure 20bar
• Side plate available in stainless steel *(EN671 Approved models)
SRI fire hose reels are tested and approved to European Standard EN671 by
British Standards Institution and to Australian Standards AS1221 by QAS
Australia.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
european FIRE HOSE REEl EUROPEAN FIRE HOSE REEL Type one
The SRI Euro fire hose reels has been tested and approved to EN671 by British
Standards Institution. This range for fire hose reel has a slimmer design which can
fit into smaller depth. For swing hose reel the inlet of the hose reel is fitted with a
BRITISH STANDARDS INSTITUTION
APPROVAL FIRE HOSE REELS
flexible hose and coupling for connection to the control valve for water supply.
(Swing Type)
CERTIFIED TO BS EN 671
LICENCE NO. KM 51857
0086 Code No. Drum Size Hose Diameter Distance Type
x Length Between
Drums
HRS072-MS-660-RD 660mm 25mm x 40m 230mm Swing Manual
HRS072-MS-600-RD 600mm 25mm x 35m 230mm Swing Manual
HRS072-MS-M22-RD 559mm 25mm x 30m 230mm Swing Manual
HRS073-MS-600-RD 600mm 25mm x 30m 200mm Swing Manual
HRS073-MS-M22-RD 559mm 25mm x 25m 200mm Swing Manual
HRS079-MS-600-RD 600mm 25mm x 20m 160mm Swing Manual
HRS076-MS-660-RD 660mm 25mm x 30m 190mm Swing Manual
HRS080-MS-600-RD 600mm 19mm x 40m 200mm Swing Manual
HRS089-MS-600-RD 600mm 19mm x 30m 160mm Swing Manual
HRS089-MS-022-RD 559mm 19mm x 25m 160mm Swing Manual
HRS078-MS-022-RD 559mm 25mm x 30m 230mm Swing Automatic
HRS077-MS-660-RD 660mm 25mm x 30m 190mm Swing Automatic
(fixed Type)
Code No. Drum Size Hose Diameter Distance Type
x Length Between
Drums
HRS150-MS-600-RD 600mm 25mm x 30m 210mm Fixed Manual
HRS150-MS-022-RD 559mm 25mm x 25m 210mm Fixed Manual
HRS151-MS-600-RD 600mm 25mm x 20m 170mm Fixed Manual
HRS152-MS-600-RD 600mm 19mm x 30m 170mm Fixed Manual
HRS074-MS-022-RD 559mm 19mm x 25m 170mm Fixed Manual
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
hose reel nozzles
SRI hose reel nozzles are designed, tested and approved to meet European Standard EN671-1 and Australian
Standard AS 1221.
Nylon and ABS material complies to ageing test in accordance to ISO4892-2.2.
Throw range position at 0.6M 30± inclination, in accordance to EN671-1 Clause 10.4
Flowrate meets the equivalent nozzle diameter of 6mm in accordance to EN671-1.
HRS167-GM-020-CH HRS167-GM-025-CH
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
hose reel accessories
HRS052-PS-STD-RD
Hose guide
Hose guide is used to ease the withdrawal of hose from fixed hose reels.
Code No. Description Material
HRS052-MS-STD-ZP HRS052-PS-STD-RD Wall Mounting Red Plastic
HRS052-MS-STD-ZP Wall Mounting Steel / Nylon Roller
HRS052-LA-STD-NA Mounting at inlet pipe Steel / Nylon Roller
HRS052-LA-STD-NA
HRS063-GM-050-RD HRS063-GM-025-RD
HRS057-MS-XXX-XX
HRS060-MS-XXX-XX
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
HOSE REEL accessories
Nozzle Box Model A
TECHNICAL SPECIFICATION
Dimension 210mm (W) x 210mm (H) x 140mm (D)
NOZZLE Capacity 1 No Gate Valve and 1No Nozzle
Thickness 0.9mm
210
GATE
VALVE Installation Wall Mounted
Paint Finish Epoxy Powder Red
Material Mild Steel
210 140
Code No. HRS071-MS-STD-RD
Specification:
Working Pressure: 220Psi (15 Bar)
Minimum Burst Pressure: 696Psi (48 Bar)
Test Pressure: 250Psi (17 Bar)
*Approved by:
Certified Product
AUSTRALIAN
STANDARD
CeRTIFIed To BS eN 671-1: 1995 CERTIFIED TO BS EN 671
AS1221 LIC1355
Certification No: PS005704 LICENCE NO. KM 51857
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
continuous flow HOSE REEL
• Available with 3/4”, 1” & 1-1/2” in 15m to 50m.
• Detachable rewinding handle
• Material: Aluminum Alloy / Mild Steel
• Optional: Trolley unit and Cabinet
• Application Area: Industrial Plant and wash down stations
TECHNICAL SPECIFICATION
Size 3/4” 1” 1 1/2"
Maximum Working
15 bar (230psi) 15 bar (230psi) 15 bar (230psi)
Pressure
Overall Dimension 700mm (H) x 750mm (W) 700mm (H) x
(exclude rewind handle) x 650mm (D) 1000mm (W) x 650mm (D)
40LPM, 20M @ 50LPM, 20M @ 290LPM, 20M @
Flowrate & Throwrange
5 bar (72 psi) 5 bar (72 psi) 5 bar (72 psi)
TECHNICAL SPECIFICATION
Capacity 3/4” x 25m hose
Weight 12kg
Nozzle Jet / Spray / Off
Material Mild Steel
Finishing Epoxy Powder Coating
Hose Material PVC
Dimension 520mm (L) x 410mm (W) x 520mm (H)
Code No. HRS114-MS-020-YW
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
10
fire hydrant valve bs 5041
BRITISH STANDARDS
Specification
INSTITUTION APPROVAL
Body : Copper Alloy to BS 1400
Handwheel : Grey Cast Iron to BS 1452
Inlet : Flanged or BSP screw thread
SINGAPORE APPROVAL
CERTIFIED
SIRIM Outlet : Female instantaneous to BS 336 and other connections
TO BS5041 PART 1
CERTIFIED TO BS 5041 PART 1
CertifieDTO to BS
Bs 5041:PT.1: 1987
en 671-1: 1995
LICENCE NO. KM85754 Certification No:
Certification no: PS005706
ps005704 Pressure Test : 22.5 bar
Manufacture and certified to BS 5041 Part 1*
Nominal size : DB65 2-1/2”, DN50 2". DN80 3"
oblique VALVE
Code No. Inlet Size
DRS097-GM-65BSP* Male BSP Thread 65mm
DRS098-GM-65ANSI ANSI 150 FF 65mm
DRS098-GM-65PN16* BS 4504 PN16 Flange 65mm
DRS098-GM-80ANSI ANSI 150 FF 80mm
DRS098-GM-65TE BS 10 Table E Flange 65mm
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
11
fire hydrant valve
gate VALVE
Approved by: Code No. Inlet Size
* BRITISH STANDARDS
INSTITUTION APPROVAL
DRS120-GM-65PN16* BS 4504 PN16 65mm
DRS120-GM-65TE BS 10 Table E Flange 65mm
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
12
wet and dry riSer equipment
Approved by:
* BRITISH STANDARDS
INSTITUTION APPROVAL
SINGAPORE APPROVAL
SIRIM TO BS5041 PART 3
CERTIFIED TO BS 5041:PT.3: 1975
Specification
Body : Spheroidal Graphite Iron to BS 2789 or Cast Iron BS 1452
Inlet : BS Instantaneous Male Copper Alloy to BS 1400
Outlet : 2 Way Breeching Inlet Flanged 4” table E. BS 10.
: 4 Way Breeching Inlet Flanged 6” table E. BS 10.
Working pressure : 15 Bar
Testing Pressure : 20 Bar
Code No. Description
DRS095-CI-002-RD* 2-way breeching inlet
WRS115-CI-004-RD* 4-way breeching inlet
Installation & commissioning to BS 5306 part 1.
GERMAN TYPE
Code No. Inlet Size Outlet Size
WRS130-GM-90D-NA Store B 75 Female BSP
(89mm) Thread 80mm
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
13
hose Rack assembly
SRI’s hose rack assembly is located inside buildings at the wet or dry riser outlet.
It features a rack in which hangs the layflat fire hose (30m). An automatic release
mechanism allows water to flow through the hose after removal of the hose and
nozzle. The rack is available in sizes of 1-1/2” and 2-1/2”. There are two methods
of mounting the hose rack. One is by using a wall bracket and the other is by
fixing on to a right angle valve.
Standard Features
Hose rack, layflat fire hose, coupling, nozzle, hose rack right angel valve, hose
rack nipple.
hose cradle
hose cradle
SRI hose cradle is the free swing type with 180˚ movement suitable for holding
one length of 2-1/2” x 30M layflat fire hose. It is installed next to the wet or dry
riser outlet.
Specification
Material : Copper Alloy to BS 2874
Working pressure : 20 Bar (290 psi)
Inlet : BSP Thread
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
14
fire hydrant equipment
HYD056-CI-100-YW HYD056-CS-150-RD
Model HYD059-CI-100-YW can be fitted with an underground 4” gate valve with spindle
cap (sluice valve) and operated by using a hydrant key and bar
(HYD066-CI-030-BK / HYD066-LA-030-NA)
Code No. Outlet Inlet
HYD059-CI-100-YW 2 x (2-1/2”) Male Thread NST/BSP 4” Table E
BS 10 Flange
HYD060-CI-100-YW 2 x 2-1/2” Control Valve with Female BS 4” Table E
Instantaneous Outlet BS 10 Flange
HYD059-CI-100-YW HYD060-CI-100-YW
Model HYD061-CI-150-RD can be fitted with an underground 6” gate valve with spindle
cap (sluice valve) and operated by using a hydrant key and bar
(HYD066-CI-030-BK / HYD066-LA-030-NA)
Code No. Outlet Inlet
HYD061-CI-150-RD 2 x (2-1/2”) Male Thread 4” Table E
1 x 4” Male Thread BS 10 Flange
HYD055-CI-150-RD 2 x 2-1/2” Control Valve with Female BS 6” Table E
Instantaneous Outlet 1 x 4” Male Thread BS 10 Flange
HYD061-CI-150-RD HYD055-CI-150-RD
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
15
internal valved fire hydrant
This hydrant is operated by using a hydrant wrench to turn the operating mechanism
at the top of the hydrant which will open the valve seat It is available in two sizes
4" and 6".
Specification
Body : Cast Iron
Valve seat : Nylon
Valve seat ring : Bronze
Test Pressure : 20 Bar (290 psi)
Working Pressure : 10 Bar (145 psi)
The Indicator Post with gate valve provides a means for operating a buried or
otherwise inaccessible gate valve to controlled flow of water in buried pipe. A
wrench is provided to fit on top of the unit for turning the gate valve open and
shut.
Indicator Post readily and clearly indicates whether the gate valve buried is open
or shut. It is suitable for gate valves from 4" up to 12".
The Indicator Post is manufactured to suit various buried depth, it is also easily
adjusted in the field for exact depth without disassembly. It is mounted on top of
the gate valve with flange for support.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
16
hydrant equipment
Underground Hydrant BS 750 Duck Foot Bend
Specification Specification
Body Grey Cast Iron to Body Grey Cast Iron to
BS 1452 or (SG) BS 2789 BS 1452
Outlet Copper Alloy to BS 1400 Flanged Inlet & Outlet 4” BS 10 Table E Flange
Round thread or V thread Code No HYD070-CI-100-BK
Inlet Universal Flange
PN16 & Table E
Test pressure 24 Bar (348 psi)
BRITISH STANDARDS
Colour Black or Blue
INSTITUTION APPROVAL
Code No HYD058-CI-080-BK
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
17
monitor & nozzle handle operated monitor
• Suitable for flows up to 1000GPM
• 2-1/2” NHT male outlet
• 360 deg. Horizontal travel
handle operated monitor •
•
Vertical 135 deg (90 deg. above to 45 deg. below)
Locking device for horizontal & vertical position
• Suitable for flows up to 1000GPM
• 2-1/2” NHT male outlet • Stainless steel handle for control horizontal
• 360 deg. Horizontal travel and vertical position
• Vertical 135 deg (90 deg. above to 45 deg.below) • Material construction Gun Metal
• Locking device for horizontal & vertical position • 4” ANSI inlet flange gun metal RF
• Stainless steel handle for control horizontal Code No. FOS047-GM-100-RD
and vertical position
• 3” stainless steel water way
• 4” ANSI inlet flange gun metal RF
Code No. fos007-SS-100-RD
Oscillating Monitor
• Automatic horizontal oscillation when water
pass through monitor
• Oscillation angle adjustable in 15 steps from Monitor Air Aspirating nozzle
300 deg to 120 deg • Inlet 2-1/2” NHT female for connection to monitor
• Oscillating speed adjustable from 2 to 10 per sec • Flowrate up to 500GPM @ 7bar
• Manual movement 360 deg horizontal • Stream pattern adjustable with lever from
• 4” ANSI inlet flange gun metal RF straight stream to fan type
• Monitor material construction in stainless steel • Throw range 45m @ 7bar
• Nozzle and flange in gun metal • Foam expansion ratio 7-10
• Oscilating mechanism: Aluminium • Available with foam inductor
• Cover: Mild steel • Material of construction aluminium alloy
Code No. FOS043-GM-100-NA Type Code No.
With Foam Inductor FOS041-LA-100-NA
Without Foam Inductor FOS042-LA-100NA
monitor nozzle •
•
Material construction Gun Metal
Straight stream and fog pattern
• Optional chrome finish
• Foam monitor nozzle with built in foam inductor, flexible hose and pick up tube, can be fitted to existing
monitor and pick up tube place in a 200L foam drums for immediate AFFF application
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
18
BRANCHPIPE NOZZLES
JET NOZZLE COMPLETE WITH BRANCHPIPE
Code No. Material Finishing Inlet Size Flowrate @ 65Psi (4.4 Bar) Throwrange @ 65Psi (4.4 Bar)
WRS077-LA-STD-NA Aluminium Alloy to BS 1490 Natural Male Instantaneous 210L/min (12mm dia.) 16m (12mm dia.)
WRS077-GM-STD-NA Copper Alloy to BS 1400 BS 336 510L/min (19mm dia.) 22m (19mm dia.)
This nozzle is available with two orifice sizes, 12mm and 19mm.
Application: Hydrant system, wet or dry riser system
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
19
adaptors and caps
BS female instantaneous x BS female instantaneous x
female screw thread adaptor male screw thread adaptor
Code No. Nominal Size Material Code No. Nominal Size Material
HYD068-LA-50BSPT Aluminium Alloy MIS010-LA-50BSPT Aluminium Alloy
2” BSPT 2” BSPT
HYD068-GM-50BSPT Copper Alloy MIS010-GM-50BSPT Copper Alloy
HYD068-LA-65BSPT Aluminium Alloy MIS010-LA-65BSPT Aluminium Alloy
2-1/2” BSPT 2-1/2” BSPT
HYD068-GM-65BSPT Copper Alloy MIS010-GM-65BSPT Copper Alloy
HYD068-LA-65NPT Aluminium Alloy MIS010-LA-65NPT Aluminium Alloy
2-1/2” NPT 2-1/2” NPT
HYD068-GM-65NPT Copper Alloy MIS010-GM-65NPT Copper Alloy
HYD068-LA-5TPI75 Aluminium Alloy MIS010-LA-5TPI75 Aluminium Alloy
75mm x 5TPI 75mm x 5TPI
HYD068-GM-5TPI75 Copper Alloy MIS010-GM-5TPI75 Copper Alloy
Note: When ordering adaptor, type of thread (NPT, NST or BSP) and diameter (1-1/2”, 2”, 2-1/2”) must be specified.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
20
adaptors AND CAPS
Storz Adaptor and cap
Code No. Description Dimension A (mm) Material
MIS009-LA-F50C52 Storz C 52 x 2" BSP female 66 Aluminium Alloy
MIS009-GM-F50C52 Storz C 52 x 2" BSP female 66 Copper Alloy
A MIS009-LA-F65NEN Storz NEN 3374 x 2-1/2" BSP female 81 Aluminium Alloy
MIS009-GM-F65NEN Storz NEN 3374 x 2-1/2" BSP female 81 Copper Alloy
MIS009-LA-F65B75 Storz B 75 x 2-1/2" BSP female 89 Aluminium Alloy
MIS009-GM-F65B75 Storz B 75 x 2-1/2" BSP female 89 Copper Alloy
hyc626-la-c52-na Storz C 52 Blank Cap 66 Aluminium Alloy
CAMLOCK COUPLING
Code No. Nominal Size Material
WRS053-GM-038-NA 1/2” (38mm) Brass instantaneous COUPLING
WRS053-GM-065-NA 2 1/2" (65mm) Brass
Code No. Nominal Size Material
WRS074-GM-038-NA 1 1/2” (38mm) Copper Alloy
WRS074-LA-038-NA 1 1/2" (38mm) Aluminium Alloy
BS336 COUPLING
Code No. Nominal Size Material
WRS079-LA-038-NA 1-1/2” (38mm) Aluminium Alloy
WRS079-LA-045-NA 1-3/4” (45mm) Aluminium Alloy FRENCH GUILLEMIN COUPLING
WRS079-LA-050-NA 2” (50mm) Aluminium Alloy Code No. Nominal Size Material
WRS079-LA-065-NA 2-1/2” (65mm) Aluminium Alloy MIS057-LA-065-NA 2 1/2” (65mm) Aluminium Alloy
WRS074-LA-038-NA 1-1/2" (38mm) Aluminium Alloy
WRS079-GM-038-NA 1-1/2" (38mm) Copper Alloy
WRS079-GM-038-NA 1-1/2” (38mm) Copper Alloy
WRS079-GM-045-NA 1-3/4” (45mm) Copper Alloy
WRS079-GM-050-NA 2” (50mm) Copper Alloy russian gost COUPLING
WRS079-GM-065-NA 2-1/2” (65mm) Copper Alloy Code No. Nominal Size Material
MIS056-LA-065-NA 2 1/2” (65mm) Aluminium Alloy
MIS056-GM-065-NA 2 1/2" (50mm) Copper Alloy
Storz Coupling
Code No. Description Material
MIS037-LA-050C52 Storz C 52, 2" hose Aluminium Alloy
MIS037-GM-050C52 Storz C 52, 2" hose Copper Alloy
MIS037-LA-038C52 Storz C 52, 1-1/2" hose Aluminium Alloy
MIS037-GM-038C52 Storz C 52, 1-1/2" hose Copper Alloy
MIS037-LA-065NEN Storz NEN 3374 2-1/2" hose Aluminium Alloy
MIS037-GM-065NEN Storz NEN 3374 2-1/2" hose Copper Alloy
MIS037-LA-065B75 Storz B 75, 2-1/2" hose Aluminium Alloy
MIS037-GM-065B75 Storz B 75, 2-1/2" hose Copper Alloy
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
21
miscellaneous
HOSE BINDING MACHINE METAL SUCTION STRAINER
Material : Body - Aluminium Alloy or Cast Code No. Material
Iron Jaw chuck - Copper Alloy
Capacity : Up to 100mmø hose MIS215-GM-100-NA Copper Alloy
Process time : Approximately 20mins per MIS215-LA-100-NA Aluminium Alloy
length of hose Connection : 100mm ø round thread
Code No MIS229-MS-STD-NA
APPLICATOR
Specification
Diameter : 25.0mm I/D
Protector : Rubber
Suction hose coupling
Material of nozzle : Aluminium Alloy Code No. Material
Outlet pattern : Spray
MIS217-LA-100-NA Aluminium Alloy
Length adjustable from : 1800-3060mm
MIS217-GM-100-NA Copper Alloy
Code No FEX158-LA-025-BK
Hose connection : 100mm Ø ribbed tail to BS 336
FIRE BLANKET
Certified Product
Suction hose
Material : PVC with nylon reinforcement
HOSE BRIDGE Length(std) : 2.4m (standard)
Material : Aluminium Alloy Optional length available upon request
Capacity : Up to 65mmø hose Diameter : 100mm Ø
Code No MIS245-LA-065-NA
Code No MIS269-PS-100-NA
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
22
foam hose reel station
This hose reel station is complete with 1-1/2” x 30M rigid hose, 120L AFFF foam,
stainless steel foam concentrate storage tank, 95GPM foam inductor and nozzle. A
bypass loop is provided for water or foam discharge.
Standard features
Inlet connection : 1-1/2” ANSI 125 RF flange
Hose reel construction : Aluminium
Tank Construction : Stainless Steel
• Water/foam pistol grip nozzle
• Non-ferrous piping and fittings
• 120L AFFF foam and concentrate
• 1-1/2” control valve
• Stainless steel pickup tube
• 100mmØ opening hole for foam concentrate filling
• Adjustable foam concentrate 3% to 6%
Application:
Protection of oil storage installation loading stations, paint and solvent stores.
Code No FOS070-SS-STD-RD
Standard features
Inlet connection : 1-1/2” ANSI 125 RF flange
Hose reel construction : Aluminium
Tank Construction : Stainless Steel
Cabinet Construction : Mild steel or Stainless Steel (upon request)
• Water/foam pistol grip nozzle
• Non-ferrous piping and fittings
• 120L AFFF foam and concentrate
• 1-1/2” control valve
• Stainless steel pickup tube
• 100mmØ opening hole for foam concentrate filling
• Adjustable foam concentrate 3% to 6%
Application:
Protection of oil storage installation loading stations, paint and solvent stores.
Code No FOS089-MS-STD-RD
Standard features
• 2 nos (2-1/2”) 65mm x 30m fire hose (Type 1) with Aluminium Alloy
BS coupling.
• 140 L AFFF foam in fibre glass tank.
• 2” Gate valve
• Low expansion foam branchpipe 225LPM
• Stainless steel pickup tube
• 100mmØ opening hole for foam concentrate filling
• 225LPM foam inductor adjustable 3% to 6% foam concentrate
• Inlet connection: 2” BSP Male thread
TECHNICAL SPECIFICATION
Dimension : 1500.0mm x 1100.0mm x 500.0mm
Material : Mild steel for cabinet
Thickness : 1.5mm
Installation : Floor Mounted
Capacity : 140 litre foam with Inductor with 2 - 1/2” x 30m hose
Type 1 (2 lengths) and Foam branchpipe
Paint Finish : Epoxy Powder Red
Code No FOS087-MS-STD-RD
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
23
FOAM BRANCHPIPE AND FOAM INDUCTOR
foam inductor
• Foam concentrate is drawn through a pick up tube at a preset foam concentrate
amount and is added into the water stream.
• Available with two flowrates
• Body material: Aluminium Alloy and Gun Metal
• Filters: Stainless Steel
• Foam concentrate rate adjustable foam 1% to 6%. Flexible foam concentrate suction
hose.
• Inlet and outlet connection BS 336 Instantaneous
Code No. Flowrate @ 101 Psi (7 Bar)
fos004-la-225-yw 225 LPM
Fos004-la-450-yw 450 LPM
Fos004-GM-225-yw 225 LPM
Fos004-GM-450-yw 450 LPM
FOAM line proportioner • Water flowing through foam line proportioner creates a vacuum which draw foam
concentrate into the unit to mix with the flowing water.
• Suitable for fixed foam system
• Low cost foam proportioning system
• Connect foam suction inlet to foam storage tank
• Material: Gun Metal
• Inlet 2-1/2” BSP, Outlet 2-1/2” BSP
• Suitable for foam spray system and foam hydrant station
• Available with 3% or 6% foam concentration proportioning
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
24
STANDPIPE, HYDRANT KEY & BAR, DIVIDING & COLLECTING BREECHING
CONTROLLED DIVIDING
DOUBLE OUTLET STANDPIPE BREECHING
Specification Material: Aluminium Alloy or Copper Alloy
Standpipe shaft : Aluminium alloy to BS 1474
MIS224-LA-065-NA
Standpipe base & Head : Aluminium Alloy to BS 1490
MIS224-GM-065-NA
: Copper Alloy to BS 1400 Code No
Material : Aluminium Alloy or Copper MIS227-LA-065-NA
Alloy MIS227-GM-065-NA
DIVIDING BREECHING
Material: Aluminium Alloy or Copper Alloy
MIS223-LA-065-NA
HYDRANT KEY & BAR Code No
MIS223-GM-065-NA
Specification
Length for hydrant bar can be made to order. Note: Inlet and Outlet connection to BS 336
• Key and bar : Aluminium alloy to BS 1490 Instantaneous
• Key : Grey Cast Iron
• Shaft tube : Mild Steel
• Bar : Steel
• Material : Aluminium Alloy or Grey
Cast Iron
HYD066-LA-030-NA
Code No HYD066-CI-HG3-BK
HYD066-CI-HG6-BK fire department connection
Material: Copper Alloy or Brass
Code No MIS271-GM-100-NA
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
25
PORTABLE DRY POWDER FIRE EXTINGUISHER MS1539
SIRIM
CERTIFIED TO MS 1539: 2002
CERTIFIED TO BS EN 671-1: 1995
Certification No: PS005703
Certification No: PS005704
SIRIM
Inspection and maintenance should be carried out according to MS1539 Part 4.
CERTIFIED TO MS 1539: 2002
CERTIFIED TO BS EN 671-1: 1995
Certification No: PS005703
Certification No: PS005704
Body FEX139-CS-020-RD FEX139-CS-050-RD
Material Carbon Steel
Capacity, kg 2.0 5.0
Working pressure, Bar 60.0 at 270C
Overall height, mm 530 770
Overall diameter, mm 113 140
Cylinder test pressure, Bar 250
Discharge time, sec 18-25 20-30
Standard Manufactured and approved to MS1539 Part 1
Full weight, Kg 8.5 18.5
Paint finish Red
Fire Rating 21B 55B
Temperature range -200C to 600C
Discharge range 3 meter
Carton size 180x195x665 230x230x715
Operating head Brass
Type of extinguishant Carbon Dioxide
Class of Fire B,C
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
26
D FIRE EXTINGUISHER Magnesium, potassium, sodium titanium, alkyllithiums, Grignards, and diethylzinc are
extremely combustible and must be used with caution and appropriate safety measures.
These chemicals react violently with water, air and other chemicals and cause class
D fires which burn at high temperatures. At such, typical fire extinguishers are not
sufficient for this type of fire.
D Fire Extinguishers contain sodium chloride or graphite metal-based powder. When
discharge on a fire, the heat causes the powder to cake and form a crust which excludes
air and dissipates the heat.
TECHNICAL SPECIFICATION
Capacity 12kg
Operating Temperature -200C to 600C
Operating Pressure 14 Bar
Height 605mm
Full Weight 19kg
Test Pressure 25 Bar
Code No. FEX115-MS-120-DF
TECHNICAL SPECIFICATION
Capacity 12kg CARBONACEOUS
MATERIALS
Operating Temperature -300C to 600C
Operating Pressure 14 Bar CLASS A CLASS B
Height 635mm
Full Weight 21kg
CARBONACEOUS FLAMMABLE
Test Pressure 25 Bar MATERIALS LIQUID
SAFE USE ON
CARBONACEOUS FLAMMABLE FLAMMABLE ELECTRICAL
MATERIALS LIQUID GAS HAZARDS
CLASS B CLASS C
SAFE USE ON
Clamping Unit
FLAMMABLE FLAMMABLE ELECTRICAL
LIQUID GAS HAZARDS
CLASS C
SAFE USE ON
FLAMMABLE ELECTRICAL
GAS HAZARDS
Code No FEX190-MS-SV
This manual
SAFE clamping machine is adjustable for all sizes of fire extinguisher. Fire
USE ON
ELECTRICAL
extinguisher
HAZARDScan be secure firmly when opening or tightening valve on the cylinder.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
27
CARBON DIOXIDE FIRE EXTINGUISHER ON TROLLEY
FEX079-CS-450-RD FEX079-CS-320-RD
Capacity, Kg 45 32
Working pressure, Bar 60 60
Cylinder test pressure, Bar 250 250
Approx. time of discharge, sec 75 60
Discharge hose (diameter/length) 1/2ӯ x 6m 1/2ӯ x 6m
Overall height, mm 1600 1420
Overall width, mm 2000 2000
Overall depth, mm 1170 1170
Full weight, Kg (lb) 150 (330) 112 (246)
Material of cylinder Maganese Steel BS 5045 Part 1
Paint Finish Grey or Red
Class of Fire B, C
FEX079-CS-150-RD FEX163-CS-150-RD
Capacity, Kg 15 15 x 2 pcs
Working pressure, Bar 60 60
Cylinder test pressure, Bar 250 250
Discharge hose (diameter/length) 1/2ӯ x 6m 1/2ӯ x 6m
Overall height, mm (approx.) ±1050 ±2410mm Extended 2780mm
Overall width, mm (approx.) ±490 ±670mm
Overall depth, mm (approx.) ±360 530mm
Material of cylinder Maganese Steel BS 5045 Part 1
Paint Finish Red
Class of Fire B, C
TION APPR
TU O
TI V
ED
IN
FIR
DARDS
E EXTI
AN
NG
ST
U
H IS
IS HE
BRIT RS
CERTIFIED TO EN 1866
LICENCE NO. KM 57533
SRI fire extinguisher on trolley units are available in ABC powder and AFFF foam type.
ABC dry chemical powder fire extinguisher on trolley is effective for use on class A, B &
C fire and it is ideal for multi-risk fire. AFFF foam fire extinguisher on trolley is suitable
for class A and B fire and highly effective for flammable liquid fire. Trolley units can be
operated by one person and are suitable for areas with high risk for fire such as
industrial facilities.
Cartridge Type
Code No. FEX149-MS-250-RD FEX149-MS-500-RD* FEX156-MS-450-RD
Type of Extinguishant ABC Powder ABC Powder AFFF Foam
Capacity, kg (lb) 25(55) 50(110) 45L
Approx, time of
50 85 60
Discharge, sec
Standard features
• 2 x 15m 1-3/4” (45mm) fire hose with Aluminium BS Coupling
• 250 LPM Foam Inductor with pickup tube
• 250 LPM Low Expansion branchpipe
• Control valve (2” ball valve)
• 120L AFFF, foam concentrate and fibre glass tank on trolley
Application:
Protection of oil storage installation loading stations, paint and solvent stores.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
29
BS EN3 Water & Foam Type Fire Extinguisher
TION APPR
TU O
PRESSURE EQUIPMENT DIRECTIVE MARINE EQUIPMENT DIRECTIVE
TI V
APPROVED FIRE EXTINGUISHERS APPROVED FIRE EXTINGUISHERS
ED
IN
FIR
DARDS
E EXTI
ISO 9001:2000
AN
NG
ST
U
H IS
IS HE
BRIT RS
CLASS A
CARBONACEOUS
MATERIALS
• British Standards Institution – BSI approval.
• Foam type is suitable for Class A & B.
CLASS A CLASS B
• Water type is suitable for Class A.
• Protective plastic lining.
• Colour coded for instant recognition.
CARBONACEOUS FLAMMABLE • High quality and good value.
MATERIALS LIQUID • ISO 9001:2000 Certified System by QAS Australia.
CLASS B CLASS C
TECHNICAL SPECIFICATION
EXTINGUISHER TYPE 6L 2L 9L 9L 9L 9L
FOAM
FLAMMABLE FOAM
FLAMMABLE FOAM WATER FOAM WATER
LIQUID GAS
STORE PRESSURE TYPE (NITROGEN PROPELLENT) CO2 CARTRIDGE
MODEL NO. FEX102
CLASS C FEX116 FEX103 FEX101 FEX112 FEX111
FIRE RATING 13A, 144B 5A, 34B 21A, 183B 13A 13A, 183B 13A
OPERATING TEMPERATURE USE O°C
SAFE ON
ELECTRICAL
to 60°C
FLAMMABLE
OPERATING PRESSURE GAS HAZARDS
12 Bar
TEST PRESSURE 25 Bar
HEIGHT 555mm 400mm 625mm 625mm 630mm 630mm
FULL WEIGHT 9.2kg
SAFE USE ON 4.0kg 13.5kg 13.5kg 14.2kg 14.2kg
ELECTRICAL
DISCHARGE TIME 50 secs
HAZARDS 12 secs 65 secs 61 secs 94 secs 89 secs
RANGE OF THROW (approx) 4 - 5 M 2 M 4 - 5 M 6 M 4-5M 6M
CARTON SIZE mm 190 x 210 x 565 125 x 160 x 430 200 x 200 x 646 200 x 200 x 645 200 x 200 x 645 200 x 200 x 645
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
30
BS EN3 Powder Type Fire Extinguisher
TION APPR
TU O
PRESSURE EQUIPMENT DIRECTIVE MARINE EQUIPMENT DIRECTIVE
TI V
APPROVED FIRE EXTINGUISHERS APPROVED FIRE EXTINGUISHERS
ED
IN
FIR
DARDS
E EXTI
ISO 9001:2000
AN
NG
ST
U
H IS
IS HE
BRIT RS
CLASS A
CARBONACEOUS
MATERIALS
CLASS A CLASS B
CARBONACEOUS FLAMMABLE
MATERIALS LIQUID
CARBONACEOUS FLAMMABLE FLAMMABLE • British Standards Institution – BSI approval store powder and cartridge type.
MATERIALS LIQUID GAS • Suitable for Class A, B, C & electrical hazards.
• Ideal for industrial, commercial and domestic environment.
CLASS A CLASS B CLASS C • High quality and good value.
• Colour coded for instant recognition.
SAFE USE ON • All units tested by electronic leak detection.
CARBONACEOUS FLAMMABLE FLAMMABLE ELECTRICAL • Operated effectively at both high and low temperature.
MATERIALS LIQUID GAS HAZARDS
• ISO 9001:2000 Certified Quality System by QAS Australia.
CLASS B CLASS C
TECHNICAL SPECIFICATION
EXTINGUISHER TYPE 1kg 2kg 4kg 6kg 9kg 6kg 9kg 12kg
SAFE USE ON
FLAMMABLE
LIQUID
FLAMMABLE
GAS
ELECTRICAL STORE PRESSURE TYPE (NITROGEN PROPELLENT)
HAZARDS
CO2 Cartridge
MODEL NO. FEX108 FEX104 FEX105 FEX106 FEX107 FEX109 FEX110 FEX115
FIRECLASS
RATING
C 5A, 34B 13A, 89B 21A, 113B 34A, 233B 34A, 233B 34A, 233B 43A, 233B 55A, 233B
OPERATING TEMPERATURE -20°C to 60°C
SAFE USE ON
OPERATING
FLAMMABLEPRESSURE ELECTRICAL 12 Bar 14 Bar
GAS HAZARDS
HEIGHT 335mm 400mm 490mm 490mm 555mm 490mm 570mm 605mm
FULL WEIGHT 2.0kg 3.3kg 7.1kg 9.1kg 12.8kg 10.5kg 14.2kg 19.0kg
TEST PRESSURE 25 Bar
Discharge time (s)
SAFE USE ON 6-10 secs 8-12 secs 11-15 secs 17-21 secs 20-24 secs 20-24 secs 23-27 secs 25-32 secs
ELECTRICAL
RANGE OF THROW (approx)
HAZARDS 4 - 5 M 4 - 5 M 5 - 6 M 5 - 6 M 5 - 6 M 5 - 6 M 5 - 6 M 5-6M
CARTON SIZE mm 105 x 120 x 345 125 x 160 x 430 180 x 210 x 495 180 x 200 x 485 200 x 200 x 565 180 x 210 x 495 205 x 205 x 590 215 x 215 x 630
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
31
BS EN3 CO2 Type Fire Extinguisher
TION APPR
TU O
PRESSURE EQUIPMENT DIRECTIVE MARINE EQUIPMENT DIRECTIVE
TI V
APPROVED FIRE EXTINGUISHERS APPROVED FIRE EXTINGUISHERS
ED
IN
FIR
DARDS
E EXTI
ISO 9001:2000
AN
NG
ST
U
H IS
IS HE
BRIT RS
CLASS A
CARBONACEOUS
MATERIALS
CLASS B
FLAMMABLE
LIQUID
CLASS A CLASS C
CLASS C
TECHNICAL SPECIFICATION
EXTINGUISHER TYPE 2kg 5kg 2kg 5kg
material FLAMMABLE Steel Steel Aluminium Aluminium
GAS
MODEL NO. FEX182 FEX183 FEX180 FEX181
FIRE RATING 34B 55B 34B 55B
OPERATING TEMPERATURE -20°C to 60°C
OPERATING PRESSURE SAFE USE ON
ELECTRICAL
50 Bar at 20°C
HAZARDS
Cylinder specification 1997/23/EC
HEIGHT 625mm 770mm 575mm 695mm
FULL WEIGHT 8.4kg 15.8kg 6.1kg 15.2kg
Empty WEIGHT 6.4kg 10.8kg 4.1kg 10.2kg
Discharge time 14 secs 15 secs 14 secs 15 secs
RANGE OF THROW (approx) 4 - 5 M 4 - 5 M 4 - 5 M 4 - 5 M
CARTON SIZE mm 220 x 180 x 650 230 x 245 x 780 180 x 200 x 530 230x 240 x 720
* Pending approval.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
32
Powder filling machine
Code No FEXPRF-SRIPRF
Weight : 47kg
Dimension : 700 x 460 x 1600 (H) mm
Power Requirement : 230V, 50Hz, 0.8kW single phase
AUSTRALIAN
STANDARD
AS1221 LIC1355
The Slim Line Hose Reel is designed for installation in shopping centres where
shop front space is at a premium. The assembly is designed to be fixed in cavity
between the walls of adjacent shops thereby occupying the minimum shop front
width.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
33
HOSE REEL CABINET
MODEL A
DOUBLE COMPARTMENT HOSE REEL CABINET
TECHNICAL SPECIFICATION
Overall Dimension 740mm (W) x 1540mm (H) x A (D)
Material Mild Steel
Thickness 1.2mm
Installation Surface / Wall Mounted, Recessed
Capacity Manual or Automatic swing Hose Reel 3/4” or 1”, & 2pcs Fire
Extinguisher
Paint Finish Epoxy Powder Red / White, 70 micron min.
MODEL B
DOUBLE COMPARTMENT PIVOT TYPE HOSE REEL
CABINET
TECHNICAL SPECIFICATION
Overall Dimension 740mm (W) x 1540mm (H) x A (D)
Material Mild Steel
Thickness 1.5mm (Door), 1.2mm (Body)
Installation Surface / Wall Mounted, Recessed
Capacity Manual or Automatic Fixed Type Hose Reel 3/4” or 1”, & 2pcs
Fire Extinguisher
Paint Finish Epoxy Powder Red / White, 70 micron min.
MODEL D
DOUBLE COMPARTMENT HOSE REEL CABINET
TECHNICAL SPECIFICATION
Overall Dimension 1050mm (W) x 800mm (H) x A (D)
Material Mild Steel
Thickness 1.2mm
Installation Surface Mounted / Recessed
Capacity Manual or Automatic Swing Type Hose Reel
1” or 3/4”, & 1 No Fire Extinguisher 9kg
Paint Finish Epoxy Powder Red, 70 micron min.
MODEL E
HOSE REEL CABINET
TECHNICAL SPECIFICATION
Overall Dimension 700mm (W) x 800mm (H) x A (D)
Material Mild Steel
Thickness 1.2mm
Installation Surface / Wall Mounted, Recessed
Capacity Manual or Automatic Swing Type Hose Reel (22” or 19” Drum)
3/4” or 1”
Paint Finish Epoxy Powder Red, 70 micron min.
MODEL G
HOSE REEL & FIRE EXTINGUISHER CABINET ARCHITRAVE
TECHNICAL SPECIFICATION
Overall Dimension 1090mm (W) x 840mm (H)
Recessed Wall
1050mm (W) x 800mm (H)
Opening Dimension
Thickness 1.2mm
Installation Recessed
Capacity 1 No Fire Extinguisher & 1 No Swing Hose Reel
Paint Finish Epoxy Powder Red, 70 micron min.
MODEL H
HOSE REEL CABINET ARCHITRAVE
TECHNICAL SPECIFICATION
Overall Dimension 740mm (W) x 840mm (H)
Recessed Wall
700mm (W) x 800mm (H)
Opening Dimension
Thickness 1.2mm
Installation Recessed
Capacity 1 No Swing Hose Reel
Paint Finish Epoxy Powder Red, 70 micron min.
MODEL I
CABINET DOOR MOUNTING (FIXED HOSE REEL)
TECHNICAL SPECIFICATION
Overall Dimension 770mm (W) x 770mm (H) x A (D)
Material Mild Steel
Thickness 1.5mm
Capacity Fixed Hose Reel 1” or 3/4”
Installation Surface / Wall Mounted, Recessed
Paint Finish Red Epoxy Powder, 70 micron min.
MODEL K
FREE STANDING CABINET
TECHNICAL SPECIFICATION
Overall Dimension 700mm (W) x 1360mm (H) x A (D)
Material Mild Steel
Thickness 1.2mm
Capacity Swing Hose Reel 1” or 3/4”
Installation Floor mounted
Paint Finish Red / White Epoxy Powder, 70 micron min.
MODEL L
FREE STANDING CABINET
TECHNICAL SPECIFICATION
Overall Dimension 750mm (W) x 1500mm (H) x 350mm (D)
Material Mild Steel
Thickness 1.2mm
Capacity Swing Hose Reel 1” or 3/4”
Installation Floor mounted
Paint Finish Red / White Epoxy Powder, 70 micron min.
Code No. HRS093-MS-350-WH
Foam hose reel is complete with a foam inductor used to supply mixture of foam
concentrate and water. Foam solution is most effective for extinguisher fire involving
flammable liquid such as petrol and solvents.
Features
• Inductor for 3% or 6% AFFF concentrate
• Flowrate 80L/m at 6bar inlet pressure
• Maximum working pressure 15bar
• Foam tank Stainless steel 50L suitable for 15 mins. of operation
• Foam supply line can be close with valve for water application only
• Thickness of cabinet : Mild steel 1.2mm
• Dimension in mm : 740 (W) x 1200 (H) x 250 (D)
Application
• Petrol stations
• Oil and solvent storage area
Code No FOS088-MS-STD-RD
The Slim Line hose reel is designed for installation in shopping centres where shop front
space is at a premium. It is designed to be fixed in a cavity between the walls of adjacent
shops thereby occupying the minimum shop front width.
Operation : Pull hose reel out of cabinet and swing hose reel to the desire direction for
withdrawal of hose.
FEX166-MS-050-RD 2pcs 560mm (D) x 820mm (H) x 260mm (D) Mild Steel
5kg CO2
TECHNICAL SPECIFICATION
Thickness 0.9mm
Installation Wall Mounted
Paint Finish Epoxy Powder Red
3/4” Strainer The by-pass connection in the check valve allows pressure surges from the supply to
by-pass the alarm valve clapper. An excess system pressure is thus created which
steadies the clapper.
3/4” Gate Valve (N.O)
A Retard Chamber is used when the water supply pressure fluctuates, such as
Alarm Line public main water supply. It is used to prevent false alarms caused by surges or
fluctuations in pressure.
To
Sprinkler Specifications
System Working pressure : 175Psi (12bar)
Factory hydrostatic test pressure : 350Psi (24bar)
Flange Connections : ANSI B16.1 125 FF Flange
Thread Connections : BSP Thread
To Drain Note: retard chamber, trim parts, alarm gong and water motor and pressure switch to
be ordered separately
Water Motor
Flowmeter
Supply To Drain
ALARM GONG
SPR003-LA-STD-RD
FLOWMETER
Alarm Test The sprinkler system flowmeter is designed to test the rate of flow available for
Valve (N.C) coverage of various hazards.
Flowmeter Application:
Flowmeter can be used in wet and dry sprinkler Systems in all hazard groups,
which complies to L.P.C.Codes.
By-pass Code No.
Description Hazard Group
3/4” Check Flowmeter Gauges Orifice Size (mm)
valve
SPR165-LA-XLH-GY SPR158-XLH XLH 21.0/18.5
SPR165-LA-OH1-GY SPR158-OH1 OH1 31.0
SPR165-LA-OH2-GY SPR158-OH2 OH2 40.0
3/4” Retard Chamber SPR165-LA-OH3-GY SPR158-OH3 OH3 45.0
Strainer SPR191-CI-020-RD SPR165-LA-OH3SGY SPR158-OH3S OH3 Special 50.0
SPR165-LA-XHH-GY SPR158-XHH-10.0 XHH 10.0 mm/min 62.0
Restricted
SPR165-LA-XHH-75 SPR158-XHH-07.5 XHH 7.5 mm/min 58.5
Orifice
To Drain Note: The drain pipework down stream of the orifice plate must have a friction loss of
less than 300 mb.
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
42
SPRINKLER SYSTEM ACCESSORIES
FLOWSWITCH
Single-Pole Double Throw (SPDT) flow switch. To provide an electrical alarm signal
when a flow in the sprinkler system occurs.
Operation of flowswitch may be checked by opening the inspection test valve.
Adjustable flow paddle, suitable for 1” to 6” pipe. 1” NPT thread connection for
installation into screwed tee fitting.
Applications
Pressure sensing of sprinkler system to provide automatic starting of sprinkler system
pumps.
Code No SPR266-P77-10
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
43
Flow Control Equipment Specification
• Non rising stem (handwheel or key operated) and O.S & Y
• Body, bonnet, disc and handwheel material: Cast iron or Ductile iron,
Cast iron to BS 1452 Gr.220, Ductile iron to BS2789 Gr.420/12 or 500/7
GATE VALVE • Available in : 1) Resilent Seat for Non Rising Stem PN16 and O.S & Y
2) Metal Seat for Non Rising Stem PN10
• Packing material : For Resilent Seat – EPDM/NBR O Rings
For Metal Seat – Polymide (Non-asbestos)
• Stem material : Stainless steel
• Gasket Material : EPDM/Rubber
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
44
Flow Control Equipment Butterfly Valve PN16
BOMBA Approved
Design Features
• Manufactured to BS 5155, BS EN 593
• Epoxy paint internal and external
• Installation horizontal or vertical
Working Pressure : 16 Bar
Working Temperature : -20°c to +120°C
Seat Test Pressure : 17.6 Bar
Body Test Pressure : 24 Bar
Service Fluids : Water, Oil or Gas
Flanges : PN 16 or Table E
Sealing ring : EPDM
Lever Operated Handwheel with Groove end with Electrical operated Body & Disk : Ductile Iron
monitor switch monitor switch Shaft : Stainless steel
Size Model No. Lever Operated Model No. Handwheel Operated Model No. Groove end Model No. Electrical Operated
2-1/2" (65) SPR169-CI-065-BL SPR168-CI-065-BL SPR166-CI-065-BL SPR167-CI-065-BL
3" (80) SPR169-CI-080-BL SPR168-CI-080-BL SPR166-CI-080-BL SPR167-CI-080-BL
4" (100) SPR169-CI-100-BL SPR168-CI-100-BL SPR166-CI-100-BL SPR167-CI-100-BL
6" (150) SPR169-CI-150-BL SPR168-CI-150-BL SPR166-CI-150-BL SPR167-CI-150-BL
8" (200) SPR169-CI-200-BL SPR168-CI-200-BL SPR166-CI-200-BL SPR167-CI-200-BL
10" (250) SPR169-CI-250-BL SPR168-CI-250-BL SPR166-CI-250-BL SPR167-CI-250-BL
12" (300) SPR169-CI-300-BL SPR168-CI-300-BL SPR166-CI-300-BL SPR167-CI-300-BL
VORTEX INHIBITOR
Material
Mild Steel Galvanised or
Stainless steel
Features
• Suitable for suction lift or positive head condition
• Flange connection to BS 10 Table E
• Prevent forming of vortex and air entry to pump
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
46
Co2 extinguishing SYSTEM
Co2 System Setup Type A, With Solenoid Actuated Pilot Cylinder
1760mm 1500mm
to Floor to Floor
This device is used to automatically monitor the contents of the CO2 cylinder. When
the CO2 gas falls the indicator on the device will show that it is empty and an optional
Micro-switch can be installed to send a signal to the control panel. This is the most
effective method of monitoring the CO2 gas in the cylinders.
3
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
47
Co2 extinguishing SYSTEM components 1/4" x 300mm hose
Manual Release
Pressure gauge
Connection to
first 45kg CO2
cylinder
Fire Curtains
Actuated by 24VDC tripping device. Install on top of louvers
or opening.
CO2 cylinder, available in
two sizes, 1.25kg or 2.2kg Code No Description
FAS253-FG-XXX-WH Fire curtain c/w steel cable
Pilot Cylinder Solenoid
24VDC FAS254-NO-24V-RD Box c/w solenoid tripping device
Solenoid Actuated
valve Size Code No
1.25kg CO2 CO2054-CS-001-SP
2.20kg CO2 CO2054-CS-022-SP
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
48
HFC 227ea/CO2 extinguishing system components
Manual Pull Box manual release / abort unit
Operating Voltage : 2 Amps @ 28VDC
(with microswitch)
Use for remote emergency manual operation. Code No Function
Mild steel painted Red Epoxy FAS-258-AB-28V With Abort Function
FAS258-NAB-28V W/O Abort Function
Installation Guide
Steel cable attach at manual ever of pilot cylinder. Run all
cable straight and use corner pulleys to change direction.
Ensure cable is protected with conduit.
Code No Description
CO2072-075-510-RD CO2 manual pull station
apollo s65 SMOKE and
heat DETECTOR & base
Operating Voltage : 17 - 28 Volts
sounder
Operating Voltage : 24VDC FAS-1B-55000-317
Code No FAS-1B-55000-122
FAS-4A-CS100
Code No FAS-1B-45681-200 (Base)
FAS-4A-Y04-24V
DISCHARGE INDICATOR
Operating Voltage : 24 VDC
Code No FAS251-24VDC-STD
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
49
HFC 227 Gas Extinguishing system
8 Application Area
Control rooms, Computer rooms, Telecommunication facilities,
Libraries, Museums
System features
• No residual after discharge • Design concentration 7%
• Electrical non conductive • Suitable for occupied rooms
• 25Bar operating pressure • Complete discharge time 10s
• Effective for flammable liquids & solid combustible materials
Design Standards
4 Design, installation and inspection requirements are carried out according to
3
NFPA 2001
manual &
pneumatic
actuator
The products specified in this brochure are subject to continual development and improvement. Information in this brochure is subject to alteration without notice. All dimensions in mm unless otherwise specified.
50