Professional Documents
Culture Documents
Central Marks Department-2
Central Marks Department-2
Subject: Scheme of Testing & Inspection STI, (Doc: STI/10702/1 February 2017) for
“Rubber Hawai Chappal” as per IS 10702:1992.
Please find enclosed Scheme of Testing & Inspection (STI Doc: STI/10702/1 February 2017) for
“Rubber Hawai Chappal” as per IS 10702:1992, duly approved by Competent Authority,् for
immediate implementation.
(R.P. Singh)
Scientist-E, CMD-2
Circulated to All BOs/ROs
Head (ITS): for hosting on intranet please.
DOC: STI/10702/1,
February 2017
1.0 LABORATORY
1.1 A laboratory shall be maintained, which shall be suitably equipped and staffed, where different tests
and inspections shall be carried out according to the methods given in the Standard.
2.2 Copies of any record and other related papers that may be required by BIS shall be made available at any
time on request.
3.1 It is recommended that, as far as possible, Statistical Quality Control (SQC) methods may be used for
controlling the quality of the product during production as envisaged in this Scheme. [See IS 397(Part 1),
IS 397(Part 2), IS 397(Part 3) and IS 397(Part 4)].
3.2 In addition, efforts should be made to gradually introduce Quality Management System in accordance
with IS/ISO 9001 as appropriate to the activities of the organization.
4.0 CALIBRATION- All testing apparatus shall be periodically checked, verified and calibrated and
records of such checks, verification and calibration shall be maintained.
5.1 The Standard Mark(s) as given in column (1) of the First Schedule of the licence shall be applied on
each Rubber Hawai Chappal legibly and indelibly by embossing, ink jet printing, provided always that
each pair so marked conforms to specified requirement of the Indian Standard.
DOC: STI/10702/1,
February 2017
5.2 MARKING -
5.2.1 In addition, the outer waist of the sole and inner face of the straps of rubber Hawai Chappal shall be
marked legibly and indelibly with the following:
5.2.2 The rubber straps shall also be marked with the side of foot, that is, right and left.
5.3.1 The rubber Hawai Chappals shall be packed as agreed to between the purchaser and the manufacturer.
Each package shall contain Chappals of one size only and shall be marked with the name of the item, size,
colour, identification of the source of manufacture and batch number (i.e Control Unit Number).
6.1 The manufacturer shall ensure that the materials used in the production meet the requirements of Table
-1 & Table-2. In case of any non compliance, the materials shall not be used in the production of Rubber
Hawai Chappal.
6.2 CONTROL UNIT – For the purpose of this scheme all finished Rubber Hawai Chappal of the same
type & size manufactured from the same type of rubber and produced in one week shall constitute a control
unit. On the basis of tests and inspection results, the decision regarding conformity or otherwise of a
control unit as a whole with the requirements of the specification, as given in Table -1 shall be taken.
6.3 The tests as indicated in Table 1 attached and at the levels of control specified therein, shall be carried
out on the whole production covered under this scheme and appropriate records and charts maintained in
accordance with paragraph 2.0 above.
6.4 In respect of all other clauses of the specification and at all stages of production, the factory shall
maintain appropriate control & checks to ensure that their product conforms to the various requirements of
the specification.
6.4 All the production, which conforms to the Indian Standard and covered by the licence, shall be marked
with Certification Mark of BIS.
7.0 REJECTIONS - A separate record shall be maintained providing information relating to the rejection of
the production not conforming to the requirements of the specification and the method of its disposal. Such
material shall in no circumstances be stored together with that conforming to the specification.
DOC: STI/10702/1,
February 2017
8.0 SAMPLES - The licensee shall supply, free of charge, the samples required for testing from his/her
factory or godown. BIS shall pay for the samples taken by it from the open market.
9.0 REPLACEMENT - Whenever a complaint is received soon after the goods with Standards Mark have
been purchased and used, and if there is adequate evidence that the goods have not been misused, defective
goods are replaced free of cost by the licensee in case the complaint is proved to be genuine and the
warranty period ( where applicable ) has not expired. The final authority to judge conformity of the product
to the Indian standards shall be with the BIS.
9.1 In the event of any damage caused by the product bearing the Standard Mark, or claim being filed by
the consumers against BIS Standards Mark and not "conforming to" the relevant Indian Standard, entire
liability arising out of such non conforming product shall be of the licensee and BIS shall not in any way be
responsible in such cases.
10.0 STOP MARKING - The marking of the product shall be stopped under intimation to BIS if, at any
time, there is any difficulty in maintaining the conformity of their product to the Standard due to any
reason. The marking may be resumed as soon as the defects are removed under intimation to BIS.
10.1 The marking of the product shall be stopped immediately if directed to do so by BIS for any reason.
The marking may then be resumed only after permission by BIS. The information regarding resumption of
markings shall also be sent to BIS.
11.0 PRODUCTION DATA - The licensee shall send to BIS as per the enclosed Proforma-1
authenticated by a Chartered Accountant, a statement of quantity produced, marked and exported by him
and the Trade value thereof at the end of each operative year of the licence.
DOC: STI/10702/1,
February 2017
vi)Shrinkage test at
100±1°C for 1 hr
Note: Wherever possible, for all tests, test pieces shall be cut from the finished article, where this is not possible, the
manufacturer shall provide test slabs from same batch/control unit of rubber mix and vulcanized to the same degree
and in the same manner as that of the rubber mix from which the straps have been manufactured.
DOC: STI/10702/1,
February 2017
PROFORMA – 1
Period covered*
Name of Licensee
CM/L No.-
Grade/Type/Size
2. Total production of the articles(s) licensed for certification marking 2.1 Total production
of the article(s) conforming to Indian Standard
3. Production covered with BIS Certification Mark and its approximate value a) Quantity
b) Invoice sale price
3.1 Brand Name used on production covered under BIS Certification Mark
3.2 Calculation of marking fee on unit rate basis: Marking Fee per unit
a) Unit
b) Quantity covered with BIS Certification Mark
------------------------------------------------------------------------------------------------------------
Note: In case a clause is not applicable, suitable remarks may be given against it.
c) Marking fee rounded off in whole rupees as obtained by applying unit rates given in
(a) On quantity given in (b)
4. Quantity not covered with BIS Certification Mark. If any, and the reasons for such non-coverage
4.1 Brand Name under which non-certified goods were sold
5.0 Quantity Exported with BIS Standard Mark and its value
5.1 Brand Name under which BIS Certified goods are exported