Professional Documents
Culture Documents
01ML00124 - Requisitos para Aço Na Aplicação de Flanges
01ML00124 - Requisitos para Aço Na Aplicação de Flanges
01ML00124 - Requisitos para Aço Na Aplicação de Flanges
: Page 1 of 2
Issued: 19-Jan-2006
01ML00124 Revised:
Revised:
GRADE 035 HIGH STRENGTH LOW ALLOY STEEL
1.0 PURPOSE
The purpose of this specification is to document engineering requirements for a high strength, low alloy
steel used in the manufacture of a fan disk insert.
2.0 SCOPE
This specification covers a fully killed, fine grained, hot rolled, High Strength Low Alloy Steel
compatible with SAE J1392 (Sheet & Strip) Grade 035 PO.
3.0 DEFINITIONS
ASTM A370 Standard Test Methods & Definitions for Mechanical Testing of Steel Products
SAE J1392 Steel, High Strength, Hot Rolled Sheet and Strip, Cold Rolled Sheet, and
Coated Sheet
5.0 REQUIREMENTS:
5.01 Mechanical Properties are for a hot rolled sheet, sulfide inclusion controlled,
killed, fine grain High Strength Low Alloy Steel compatible with SAE J1392
Grade 035 PO with the exception of elongation as noted below.
Revised:
GRADE 035 HIGH STRENGTH LOW ALLOY STEEL