Professional Documents
Culture Documents
ES-05015 - Especificação de Chapas Na Aplicação de Flanges
ES-05015 - Especificação de Chapas Na Aplicação de Flanges
1.0 SCOPE
1.1 This specification covers HSLA, killed, fine grain steel sheet and strip for stamping.
2.0 APPLICATION
2.1 The material is used for a disk (hub,insert) in injection molded engine cooling fans.
3.1 Material characteristics are in accordance to ASTM A1011 and A1008, including but not
limited to chemical composition, surface/finish appearance, and formability. Mechanical
properties are per Grade 80 with the exception of Tensile Strength, elongation and
hardness noted below.
3.2 Product drawing will designate should specific applications require restrictions for either
Cold Rolled (CR) or Hot Rolled (HR).
4.2 The supplier will forfeit qualification if a change is made in material, processing
methods, testing methods, location of manufacture, or any other change that may affect
the quality of product, without prior written approval from BorgWarner Engineering.